Unconventional Photocatalysis in Conductive Polymers: Reversible Modulation of PEDOT:PSS Conductivity by Long-Lived Poly(Heptazine Imide) Radicals

Low-Temperature Synthesis of Cyano-Rich Modified Surface-Alkalinized Heterojunctions with Directional Charge Transfer for Photocatalytic In Situ Generation and Consumption of Peroxides

The synthesis of low-temperature poly(heptazine imide) (PHI) presents a significant challenge. In this context, we have developed a novel low-temperature synthesis strategy for PHI in this work. This strategy involves the introduction of Na+ ions, which etch and disrupt the conjugated structure of carbon nitride (CN) during assisted thermal condensation. This disruption leads to the partial decomposition of the heptazine ring structure, resulting in the formation of C≡N functionalities on the CN surface, which are enriched with hydroxyl groups and undergo cyano modification. The formation of heterojunctions between CN and ZnO, which facilitate charge transfer along an immobilization pathway, accelerated charge transfer processes and improved reactant adsorption as well as electron utilization efficiency. The resulting catalyst was employed for the room temperature, atmospheric pressure, and solvent-free photocatalytic selective oxidation of cumene (CM), achieving a cumene conversion rate of 28.7% and a remarkable selectivity of 92.0% toward the desired product, cumene hydroperoxide (CHP). Furthermore, this CHP induced oxidative reactions, as demonstrated by the successful oxidation of benzylamine to imine and the oxidation of sulfide to sulfoxide, both yielding high product yields. Additionally, the utilization of a continuous-flow device significantly reduces the reaction time required for these oxidation processes. This work not only introduces an innovative approach to environmentally friendly, sustainable, clean, and efficient PHI synthesis but also underscores the promising potential and advantages of carbon nitride-based photocatalysts in the realm of sustainable and green organic transformations.

An integrated solar battery based on a charge storing 2D carbon nitride

Solar batteries capable of harvesting sunlight and storing solar energy present an attractive vista to transition our energy infrastructure into a sustainable future. Here we present an integrated, fully earth-abundant solar battery based on a bifunctional (light absorbing and charge storing) carbon nitride (K-PHI) photoanode, combined with organic hole transfer and storage materials. An internal ladder-type hole transfer cascade via a transport layer is used to selectively shuttle the photogenerated holes to the PEDOT:PSS cathode. This concept differs from previous designs such as light-assisted battery schemes or photocapacitors and allows charging with light during both electrical charge and discharge, thus substantially increasing the energy output of the cell. Compared to battery operation in the dark, light-assisted (dis)charging increases charge output by 243%, thereby increasing the electric coulombic efficiency from 68.3% in the dark to 231%, leading to energy improvements of 94.1% under illumination. This concept opens new vistas towards compact, highly integrated devices based on multifunctional, carbon-based electrodes and separators, and paves the way to a new generation of earth-abundant solar batteries.

Recent Advances in Graphene-Based Nanocomposites for Ammonia Detection

The increasing demand to mitigate the alarming effects of the emission of ammonia (NH3) on human health and the environment has highlighted the growing attention to the design of reliable and effective sensing technologies using novel materials and unique nanocomposites with tunable functionalities. Among the state-of-the-art ammonia detection materials, graphene-based polymeric nanocomposites have gained significant attention. Despite the ever-increasing number of publications on graphene-based polymeric nanocomposites for ammonia detection, various understandings and information regarding the process, mechanisms, and new material components have not been fully explored. Therefore, this review summarises the recent progress of graphene-based polymeric nanocomposites for ammonia detection. A comprehensive discussion is provided on the various gas sensor designs, including chemiresistive, Quartz Crystal Microbalance (QCM), and Field-Effect Transistor (FET), as well as gas sensors utilising the graphene-based polymer nanocomposites, in addition to highlighting the pros and cons of graphene to enhance the performance of gas sensors. Moreover, the various techniques used to fabricate graphene-based nanocomposites and the numerous polymer electrolytes (e.g., conductive polymeric electrolytes), the ion transport models, and the fabrication and detection mechanisms of ammonia are critically addressed. Finally, a brief outlook on the significant progress, future opportunities, and challenges of graphene-based polymer nanocomposites for the application of ammonia detection are presented.

Photoelectron Storages in Functionalized Carbon Nitrides for Colorimetric Sensing of Oxygen

Colorimetric sensors have been widely used for centuries across diverse fields, thanks to their easy operation and uncompromisingly high sensitivity with no need for electricity. However, it is still a great challenge for conventional chromogenic systems to perform multiple measurements meanwhile maintaining high robustness. Here, we reported that carbon nitrides (CNs), the raw materials that are abundant, structure-tunable, and stable semiconductors with photoelectron storage capability, can be developed as a chromogenic system for colorimetric sensors. Beyond conventional metal oxides that only demonstrated a single blue-color switch after photoelectron storage, CN exhibited a multicolor switch under identical conditions owing to the unusual multiple photoelectron storage pathways. Mechanism studies revealed cyano and carbonyl groups in CN crucially elongated the centroid distance of electrons/holes, which exclusively stabilized the specific excited states that have different light absorption; meanwhile, the counter cations strengthened these processes. As a result, O₂, a proof-of-concept analyte, was quantitatively detected by the CN-derived colorimetric sensor, showing high reversibility in hundreds of cycles and adaptable sensitivity/detection range, outperforming most reported and commercial oxygen sensors. These intriguing features of CN are highly envisioned for the next generation of colorimetric sensors, especially in developing countries or fieldworks, to improve the detection reliability and lower the sensing cost.

Conductivity Mechanism in Ionic 2D Carbon Nitrides: From Hydrated Ion Motion to Enhanced Photocatalysis

Carbon nitrides are among the most studied materials for photocatalysis; however, limitations arise from inefficient charge separation and transport within the material. Here, this aspect is addressed in the 2D carbon nitride poly(heptazine imide) (PHI) by investigating the influence of various counterions, such as M = Li⁺ , Na⁺ , K⁺ , Cs⁺ , Ba²⁺ , NH₄ ⁺ , and tetramethyl ammonium, on the material's conductivity and photocatalytic activity. These ions in the PHI pores affect the stacking of the 2D layers, which further influences the predominantly ionic conductivity in M-PHI. Na-containing PHI outperforms the other M-PHIs in various relative humidity (RH) environments (0-42%RH) in terms of conductivity, likely due to pore-channel geometry and size of the (hydrated) ion. With increasing RH, the ionic conductivity increases by 4-5 orders of magnitude (for Na-PHI up to 10^-5 S cm^-1 at 42%RH). At the same time, the highest photocatalytic hydrogen evolution rate is observed for Na-PHI, which is mirrored by increased photogenerated charge-carrier lifetimes, pointing to efficient charge-carrier stabilization by, e.g., mobile ions. These results indicate that also ionic conductivity is an important parameter that can influence the photocatalytic activity. Besides, RH-dependent ionic conductivity is of high interest for separators, membranes, or sensors.

Synthesis of Sulfonyl Chlorides from Aryldiazonium Salts Mediated by a Heterogeneous Potassium Poly(heptazine imide) Photocatalyst

Visible light photocatalysis is a tool in synthetic chemistry that allows us to utilize the energy of photons via photoinduced electron transfer to promote diverse organic reactions. Herein, a heterogeneous transition metal-free material, a type of carbon nitride photocatalyst, potassium poly(heptazine imide), is employed to produce sulfonyl chlorides from arenediazonium salts under mild conditions (visible light irradiation, room temperature) with 50-95% yields. The method is suitable for the synthesis of both electron rich and electron deficient compounds, and it shows high tolerance toward different functional groups (halides, ester, nitro, cyano groups). Thus, a sustainable photocatalytic alternative to the Meerwein chlorosulfonylation reaction is offered.

Multisite PCET with photocharged carbon nitride in dark

A combination of photochemistry and proton coupled electron transfer (PCET) is a primary strategy employed by biochemical systems and synthetic chemistry to enable uphill reactions under mild conditions. Degenerate nanometer-sized n-type semiconductor nanoparticles (SCNPs) with the Fermi level above the bottom of the conduction band are strongly reducing and act more like metals than semiconductors. Application of the degenerate SCNPs is limited to few examples. Herein, we load microporous potassium poly(heptazine imide) (K-PHI) nanoparticles with electrons (e^‒) and charge balancing protons (H⁺) in an illumination phase using sacrificial agents. e^‒/H⁺ in the K-PHI nanoparticles are weakly bound and therefore could be used in a range of PCET reactions in dark, such as generation of aryl radicals from aryl halides, ketyl radicals from ketones, and 6e^‒/6H⁺ reduction of nitrobenzene to aniline. The integration of several features that until now were intrinsic for plants and natural photosynthesis into a transition metal free nanomaterial composed of abundant elements (C, N, and K) offers a powerful tool for synthetic organic chemistry.

Chromoselective Synthesis of Sulfonyl Chlorides and Sulfonamides with Potassium Poly(heptazine imide) Photocatalyst

Among external stimuli used to promote a chemical reaction, photocatalysis possesses a unique one-light. Photons are traceless reagents that provide an exclusive opportunity to alter chemoselectivity of the photocatalytic reaction varying the color of incident light. This strategy may be implemented by using a sensitizer capable to activate a specific reaction pathway depending on the excitation light. Herein, we use potassium poly(heptazine imide) (K-PHI), a type of carbon nitride, to generate selectively three different products from S-arylthioacetates simply varying the excitation light and otherwise identical conditions. Namely, arylchlorides are produced under UV/purple, sulfonyl chlorides with blue/white, and diaryldisulfides at green to red light. A combination of the negatively charged polyanion, highly positive potential of the valence band, presence of intraband states, ability to sensitize singlet oxygen, and multi-electron transfer is shown to enable this chromoselective conversion of thioacetates.

Unconventional Photocatalysis in Conductive Polymers: Reversible Modulation of PEDOT:PSS Conductivity by Long-Lived Poly(Heptazine Imide) Radicals

In photocatalysis, small organic molecules are converted into desired products using light responsive materials, electromagnetic radiation, and electron mediators. Substitution of low molecular weight reagents with redox active functional materials may increase the utility of photocatalysis beyond organic synthesis and environmental applications. Guided by the general principles of photocatalysis, we design hybrid nanocomposites composed of n-type semiconducting potassium poly(heptazine imide) (K-PHI), and p-type conducting poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) as the redox active substrate. Electrical conductivity of the hybrid nanocomposite, possessing optimal K-PHI content, is reversibly modulated combining a series of external stimuli ranging from visible light under inert conditions and to dark conditions under an O2 atmosphere. Using a conductive polymer as the redox active substrate allows study of the photocatalytic processes mediated by semiconducting photocatalysts through electrical conductivity measurements.