(Aza)Pentacenes Clipped into a Ring: Stabilization of Large (Aza)Acenes

Steric protection of near-infrared fluorescent dyes for enhanced bioimaging

Near-fluorescent (NIR) dyes that absorb and emit light in the wavelength range of 650-1700 nm are well-suited for bioimaging due to the improved image contrast and increased penetration of the long-wavelength light through biological tissue. However, the imaging performance of NIR fluorescent dyes is limited by several inherent photophysical and physicochemical properties including, low fluorescence quantum yield, high chemical and photochemical reactivity, propensity to self-aggregate in water, non-specific association with off-target biological sites, and non-optimal pharmacokinetic profiles in living subjects. In principle, all these drawbacks can be alleviated by steric protection which is a structural process that surrounds the fluorophore with bulky groups that block undesired intermolecular interactions. The literature methods to sterically protect a long-wavelength dye can be separated into two general strategies, non-covalent dye encapsulation and covalent steric appendage. Illustrative examples of each method show how steric protection improves bioimaging performance by providing: (a) increased fluorescence brightness, (b) higher fluorophore ground state stability, (c) decreased photobleaching, and (d) superior pharmacokinetic profile. Some sterically protected dyes are commercially available and further success with future systems will require experts in chemistry, microscopy, cell biology, medical imaging, and clinical medicine to work closely as interdisciplinary teams.

How to Stabilize Large Soluble (Hetero-)Acenes

The higher acenes and azaacenes (>(aza)heptacenes) are fascinating, yet elusive materials. Their reactivity and sensitivity increases concomitantly with their size. In recent years, confinement techniques, that is isolation of acenes in matrices and on surfaces, has surpassed solution-based chemistry with respect to accessing the larger (hetero)acenes at the price of the accessibility of no more than a couple thousands of molecules. Isolating acenes in bulk quantities and in processable form is vital for applications in organic electronics as well as from a viewpoint from basic research. In this Perspective, we will discuss after a short historical outline their degradation pathways, and then will selectively highlight recent efforts in stabilizing soluble (aza)acenes.

Stabilization of Acenes: "Geländer"-Pentacenes

We report soluble tetrakis-biphenylyl substituted pentacenes comprised of sp2 carbons and synthesized from pentacene-5,7,12,14-tetraone. Intramolecular Yamamoto coupling of two tetrakis(chlorobiphenylyl)pentacenes yields helical, doubly wrapped pentacenes, in which the quaterphenylene units solubilize the pentacenes and shield their central anthracene units to an unprecedented degree. The criss-cross-bridged pentacenes resist (photo)oxidation, Diels-Alder reactions and are much less reactive than TIPS-ethynylated pentacene. Extension of this concept might provide access to the larger acenes.

Stabilizing Azaheptacenes

The symmetrical 7,16-diaza-6,8,15,17-tetrakis(triisopropylsilylethynyl)heptacene was obtained by a Pd-catalyzed reaction of a 2,3-diamino-1,4-diethynylanthracene with a 2,3-dibromo-1,4-diethynyl anthracene. Positioning the TIPS-ethynyl groups adjacent to the central ring suppresses dimerization via [4+4] cycloadditions and Diels-Alder reactions; the middle pyrazine ring renders this species stable to oxidation. A single crystal structure was obtained, and thin film transistors with μn = 0.042 cm2 V-1 s-1 were produced. Transposition of the alkynyl groups into the 5,8,15,18-positions with a quinoxaline unit in the center of the heptacene decreases the stability, as does the introduction of two more nitrogen atoms into the 5,18-positions. The hydrocarbon 6,8,15,17-tetrakis(triisopropylsilylethynyl)heptacene is reasonably stable with a half-life of 25 h in solution. Four correctly placed TIPS-ethynyl groups protect heptacene cores.

Doubly Strapped Zwitterionic NIR-I and NIR-II Heptamethine Cyanine Dyes for Bioconjugation and Fluorescence Imaging

Heptamethine cyanine dyes enable deep tissue fluorescence imaging in the near infrared (NIR) window. Small molecule conjugates of the benchmark dye ZW800-1 have been tested in humans. However, long-term imaging protocols using ZW800-1 conjugates are limited by their instability, primarily because the chemically labile C4'-O-aryl linker is susceptible to cleavage by biological nucleophiles. Here, we report a modular synthetic method that produces novel doubly strapped zwitterionic heptamethine cyanine dyes, including a structural analogue of ZW800-1, with greatly enhanced dye stability. NIR-I and NIR-II versions of these doubly strapped dyes can be conjugated to proteins, including monoclonal antibodies, without causing undesired fluorophore degradation or dye stacking on the protein surface. The fluorescent antibody conjugates show excellent tumor-targeting specificity in a xenograft mouse tumor model. The enhanced stability provided by doubly strapped molecular design will enable new classes of in vivo NIR fluorescence imaging experiments with possible translation to humans.

Substituted Cyclopentannulated Tetraazapentacenes

Brominated pentannulated dihydrotetraazapentacenes were prepared by gold- or palladium-catalyzed 5-endo-dig cyclization of TIPS-ethynylated dihydrotetraazaacenes (TIPS = triisopropylsilyl). Post-functionalization was demonstrated by Sonogashira alkynylation and Rosenmund-von Braun cyanation. Calculations predict these species to act as n-type semiconductors, which was verified for two derivates through characterization in organic field-effect transistors.

Effects of Molecular Encapsulation on the Photophysical and Charge Transport Properties of a Naphthalene Diimide Bithiophene Copolymer

Engineering the molecular structure of conjugated polymers is key to advancing the field of organic electronics. In this work, we synthesized a molecularly encapsulated version of the naphthalene diimide bithiophene copolymer PNDIT2, which is among the most popular high charge mobility organic semiconductors in n-type field-effect transistors and non-fullerene acceptors in organic photovoltaic blends. The encapsulating macrocycles shield the bithiophene units while leaving the naphthalene diimide units available for intermolecular interactions. With respect to PNDIT2, the encapsulated counterpart displays an increased backbone planarity. Molecular encapsulation prevents preaggregation of the polymer chains in common organic solvents, while it permits π-stacking in the solid state and promotes thin film crystallinity through an intermolecular-lock mechanism. Consequently, n-type semiconducting behavior is retained in field-effect transistors, although charge mobility is lower than in PNDIT2 due to the absence of the fibrillar microstructure that originates from preaggregation in solution. Hence, molecularly encapsulating conjugated polymers represent a promising chemical strategy to tune the molecular interaction in solution and the backbone conformation and to consequently control the nanomorphology of casted films without altering the electronic structure of the core polymer.

Controlling the helicity of π-conjugated oligomers by tuning the aromatic backbone twist

The properties of π-conjugated oligomers and polymers are commonly controlled by side group engineering, main chain engineering, or conformational engineering. The last approach is typically limited to controlling the dihedral angle around the interring single bonds to prevent loss of π-conjugation. Here we propose a different approach to conformational engineering that involves controlling the twist of the aromatic units comprising the backbone by using a tether of varying lengths. We demonstrate this approach by synthesizing an inherently twisted building unit comprised of helically locked tethered acenes, bearing acetylene end-groups to enable backbone extension, which was applied in a series of nine helical oligomers with varying backbone length and twist. We find that the optical and electronic properties of π-conjugated systems may be determined by the additive, antagonistic, or independent effects of backbone length and twist angle. The twisted oligomers display chiral amplification, arising from the formation of secondary helical structures.

One approach to altering the properties of π-conjugated oligomers is conformational engineering, in which the degree of rotation around the bonds linking monomers is restricted. Here the authors apply the conformational engineering approach on individual monomers using tethers of varying lengths to twist the aromatic units, and study the effects of varying the angles.

Kinetic Stabilization of Blue-Emissive Anthracenes: Phenylene Bridging Works Best

In attempts at kinetically stabilizing blue‐emissive anthracenes, a series of 9,10‐diaryl substituted derivatives were tested for their photochemical and photooxidative persistence. A major breakthrough in light fastness comes from a new bis‐meta‐terphenylyl substituted anthracene which is much superior to industrially relevant 9,10‐biarylated anthracenes. The key issue is the steric shielding of the anthracene core. Further, intramolecular ring closure via Yamamoto coupling furnished a doubly bridged anthracene as a “self‐encapsulated” sky‐blue emitter which is most resistant to photodegradation. The improved stabilization was corroborated by time‐resolved irradiation experiments and rationalized by X‐ray crystallography.

Azaacenes Based Electroactive Materials: Preparation, Structure, Electrochemistry, Spectroscopy and Applications-A Critical Review

This short critical review is devoted to the synthesis and functionalization of various types of azaacenes, organic semiconducting compounds which can be considered as promising materials for the fabrication of n-channel or ambipolar field effect transistors (FETs), components of active layers in light emitting diodes (LEDs), components of organic memory devices and others. Emphasis is put on the diversity of azaacenes preparation methods and the possibility of tuning their redox and spectroscopic properties by changing the C/N ratio, modifying the nitrogen atoms distribution mode, functionalization with electroaccepting or electrodonating groups and changing their molecular shape. Processability, structural features and degradation pathways of these compounds are also discussed. A unique feature of this review concerns the listed redox potentials of all discussed compounds which were normalized vs. Fc/Fc⁺. This required, in frequent cases, recalculation of the originally reported data in which these potentials were determined against different types of reference electrodes. The same applied to all reported electron affinities (EAs). EA values calculated using different methods were recalculated by applying the method of Sworakowski and co-workers (Org. Electron. 2016, 33, 300-310) to yield, for the first time, a set of normalized data, which could be directly compared.

The Pyrazinacenes

Pyrazinacenes are a class of nitrogen-containing heteroacene molecules composed of linearly fused pyrazine units, which might also include dihydropyrazine groups leading to different reduced states of the compounds. While they are structurally similar to hydrocarbon acenes (e.g., pentacene) the presence of increasing numbers of N-heteroatoms introduces several different additional features of the compounds so that they can be considered for investigations beyond those suggested for acenes (i.e., organic field-effect transistors, solar cell components). Pyrazinacenes are in several ways complementary to C-H-only acenes based on the increasing stability of reduced states of the compounds with increasing numbers of fused pyrazine rings, although an acene-like electronic structure persists in the compounds so far studied. However, the introduction of multiple N atoms leads to properties that depart from C-H-only acenes. In particular, the compounds exhibit a delocalization of NH protons in extended reduced compounds and oxidation state switchability in solution and at interfaces. The presence of NH groups also allows an easy introduction of solubilizing groups at the pyrazinacene chromophore. In this Account, we will describe the preparation of extended pyrazinacenes from dipyrazino[2,3-b:2',3'-e]pyrazine (1,4,5,8,9,10-hexaazaanthracene; N6) derivatives up to 1,4,5,6,7,8,9,12,13,14,15,16,17,18-tetradecaazaheptacene (N14) and also assess structures of the relevant compounds based on X-ray crystallographic studies. Emergent properties of the molecules include highly unusual linear tautomeric processes based on a delocalization of protons (and the corresponding formation of orbitals based on multiple adjacent N lone electron pair interactions), which suggest special transport properties based on molecular protonics. Molecules such as decazapentacene (N10) exhibit multistability of oxidation state, and this is predicted to promote the redox catalytic properties of the compounds. The oxidation-state switching of on-surface processes is also described and has been investigated using scanning tunneling microscopy. The longest known pyrazinacene chromophore (N14) exhibits amphiprotism with its state of protonation being strongly coupled to its fluorescence emission properties in the near-infrared region indicating possible uses in pH-coupled bioimaging applications. The synthesis of the pyrazinacenes is flexible and allows the preparation of symmetrically or unsymmetrically substituted derivatives for the development of more complex molecules and for control of the electronic structure of the acene unit. Overall, the pyrazinacenes represent an emerging class of highly nitrogenous heteroacenes with unique properties and excellent potential for development in different applications based on their special supramolecular properties including guest binding or interactions in biological systems.

TIPS-Ethynylated Naphthodiquinoline and Naphthodiacridine: Novel Diazabisacenes

The synthesis of two diazabisacenes is reported. A bisboronated naphthalene was Suzuki‐coupled to substituted ethyl nicotinates, then cyclized by intramolecular Friedel‐Crafts acylation. The resulting diketones were alkynylated and reduced to give the title compounds, bis(TIPS‐ethynyl)‐substituted naphtha[1,8‐gh:5,4‐g′h′]diquinoline and naphtho[1,8‐bc:5,4‐b′c′]diacridine. Nitrogen incorporation stabilizes the bisacenes with respect to oxidation compared to their consanguine nonaza analogs.

(Aza)Pentacenes Clipped into a Ring: Stabilization of Large (Aza)Acenes

A doubly alkylene bridged 6,13‐diphenylpentacene and analogously bridged azapentacenes were prepared; they are persistent. The doubly bridged azapentacenes display superior photochemical, oxidative and thermal stabilities compared to azapentacenes protected by bis(TIPS‐ethynyl)‐substituents—clipping an azaacene into a large ring is a viable complement in stabilization.

Steric effects on the intramolecular charge transfer fluorescence of benzo[b]thiophene-1,1-dioxide bridged macrocages

Intramolecular charge transfer (ICT) fluorescence has been widely investigated and exploited in sensor molecules. However, steric effects on the ICT fluorescence properties have rarely been reported so far, although research in this area would promote an understanding of the basics of solvation. Herein, we report the detailed fluorescence properties of bis(trimethylsilyl)benzo[b]thiophene-1,1-dioxide (TMSBTO2) and its caged cyclophanes and non-cage isomers, which demonstrate ICT fluorescence in various solutions. The fluorescence band maxima for these benzo[b]thiophene-1,1-dioxides (BTO2s) showed a red-shift with increasing solvent polarity, confirming ICT fluorescence characteristics. The linearity of the Lippert-Mataga plots was confirmed for all ICT fluorescence measured in hexane, toluene, AcOEt, CH2Cl2, and EtOH. The slopes of the plots decreased in the following order: TMSBTO2, non-cage isomers, and caged BTO2s. It is concluded that the Onsager radii for these BTO2s were increased in the abovementioned order, assuming that the difference in the dipole moments between the excited and ground states for these BTO2s was identical.