Perovskite Nanosheet Hydrogels with Mechanochromic Structural Color

Designed functions of oxide/hydroxide nanosheets via elemental replacement/doping

Partial replacement of one structural element in a solid with another of a similar size was conducted to impart functionality to the solids and modify their properties. This phenomenon is found in nature in coloured gemstones and clay minerals and is used in materials chemistry and physics, endowing materials with useful properties that can be controlled by incorporated heteroelements and their amounts. Depending on the area of research (or expected functions), the replacement is referred to as "isomorphous substitution", "doping", etc. Herein, elemental replacement in two-dimensional (2D) oxides and hydroxides (nanosheets or layered materials) is summarised with emphasis on the uniqueness of their preparation, characterisation and application compared with those of the corresponding bulk materials. Among the 2D materials (graphene, metallenes, transition metal chalcogenides, metal phosphate/phosphonates, MXenes, etc.), 2D oxides and hydroxides are characterised by their presence in nature, facile synthesis and storage under ambient conditions, and possible structural variation from atomic-level nanosheets to thicker nanosheets composed of multilayered structures. The heteroelements to be doped were selected depending on the target application objectively; however, there are structural and synthetic limitations in the doping of heteroelements. In the case of layered double hydroxides (single layer) and layered alkali silicates (from single layer to multiple layers), including layered clay minerals (2 : 1 layer), the replacement (commonly called isomorphous substitution) is discussed to understand/design characteristics such as catalytic, adsorptive (including ion exchange), and swelling properties. Due to the variation in their main components, the design of layered transition metal oxide/hydroxide materials via isomorphous substitution is more versatile; in this case, tuning their band structure, doping both holes and electrons, and creating impurity levels are examined by the elemental replacement of the main components. As typical examples, material design for the photocatalytic function of an ion-exchangeable layered titanate (lepidocrocite-type titanate) and a perovskite niobate (KCa2Nb3O10) is discussed, where elemental replacement is effective in designing their multiple functions.

Facile Formation of Multifunctional Biomimetic Hydrogel Fibers for Sensing Applications

To face the challenges in preparing hydrogel fibers with complex structures and functions, this study utilized a microfluidic coaxial co-extrusion technique to successfully form functional hydrogel fibers through rapid ionic crosslinking. Functional hydrogel fibers with complex structures, including linear fibers, core-shell structure fibers, embedded helical channels, hollow tubes, and necklaces, were generated by adjusting the composition of internal and external phases. The characteristic parameters of the hydrogel fibers (inner and outer diameter, helix generation position, pitch, etc.) were achieved by adjusting the flow rate of the internal and external phases. As biocompatible materials, hydrogel fibers were endowed with electrical conductivity, temperature sensitivity, mechanical enhancement, and freeze resistance, allowing for their use as temperature sensors for human respiratory monitoring and other biomimetic application developments. The hydrogel fibers had a conductivity of up to 22.71 S/m, a response time to respiration of 37 ms, a recovery time of 1.956 s, and could improve the strength of respiration; the tensile strength at break up to 8.081 MPa, elongation at break up to 159%, and temperature coefficient of resistance (TCR) up to -13.080% °C-1 were better than the existing related research.

2D Photonic Colloidal Liquid Crystals Composed of Self-Assembled Rod-Shaped Particles

Photonic crystals, characterized by their periodic structures, have been extensively studied for their ability to manipulate light. Typically, the development of 2D photonic crystals requires either sophisticated equipment or precise orientation of spherical nanoparticles. However, liquid-crystalline (LC) materials offer a promising alternative, facilitating the formation of periodic structures without the need for complex manipulation. Despite this advantage, the development of 2D photonic periodic structures using LC materials is limited to a few colloidal nanodisk liquid crystals. Herein, 2D photonic colloidal liquid crystals composed of biomineral-based nanorods and water is reported. The soft photonic materials with 2D structure by self-assembled LC colloidal nanorods are unique and a new class of photonic materials different from conventional solid 2D photonic materials. These colloids exhibit bright structural colors with high reflectance (>50%) and significant angular dependency. The structural colors are adjusted by controlling the concentration and size of the LC colloidal nanorods. Furthermore, mechanochromic hydrogel thin films with 2D photonic structure are developed. The hydrogels exhibit reversible mechanochromic properties with angular dependency, which can be used for an advanced stimuli responsible sensor.

Liquid-Crystalline Photonic Sandwich: Electroresponsive Colloids of Clay Nanosheets Loading Photofunctional Dyes

Colloidal clay nanosheets obtained by the delamination of layered crystals of smectite-type clay minerals in water form liquid crystals because of their shape anisotropy. Loading of organic dyes onto the liquid crystalline clay nanosheets will enable novel photonic materials, where photofunctions of the loaded dye are controlled by the liquid crystallinity of the clay nanosheets. However, adsorption of organic dyes onto the nanosheets renders the nanosheet surfaces hydrophobic, and consequently, colloidal stability of the nanosheets is lost. In this study, this drawback is overcome by sandwiching cationic stilbazolium dyes between a pair of synthetic fluorohectorite nanosheets. This is realized by the preparation of stilbazolium-clay second-stage intercalation compounds characterized by intercalation of dye cations into every other interlayer space of the hectorite clay, where nonintercalated interlayer spaces are occupied by Na+ ions. The second-stage intercalation compounds are obtained by partial ion exchange of mother clay mineral incorporating Na+ ions in all of the interlayer spaces and delaminated from the Na+-containing interlayer spaces to form clay nanosheets sandwiching the dye molecules. Aqueous colloids of the dye-sandwiching clay nanosheets form colloidal liquid crystals, and the dye-sandwiching liquid crystalline clay nanosheets respond to an applied AC electric field to be aligned parallel to the electric field. The assembled structure of the dye-sandwiching clay nanosheets under the electric field is characterized by aligned discrete clay platelets, which is somewhat different from that of a colloidal liquid crystal of clay nanosheets without dye loading characterized by macroscopic liquid crystalline domains up to submillimeters. The electric alignment of the clay nanosheets induces alteration of light absorption of the sandwiched stilbazolium molecules, which verifies a strategy of constructing stimuli-responsive photonic materials of clay-organic hybrids.

Jellyfish-Inspired Visual and Sensory Bubbling Robots with Automatic 3D Morphable Films for Underwater Environmental Interactions

Coelenterates, such as Atolla jellyfish, are capable of integrating color, communication, and motion in a sophisticated manner, thereby enabling them to function as intelligent biological systems that can adapt to the challenges of the underwater environment. Extensive efforts have been dedicated to exploiting underwater visual, sensory, actuating, or combined systems. However, current biomimetic soft systems are still limited by the lack of comprehensive, integrated functional skins that can automatically deform, dynamically sense, and further send color signals when diving into underwater conditions. Here, we propose the synthetic soft skins composed of assembled entangled carbon nanotube networks and fluorescent unit-embedded elastomers which can be applied in a suspended form to allow autonomic 3D deformation, real-time perception, and dynamic fluorescence color transformation. The capabilities of the sensory and color display thresholds were controlled through the entanglement density of carbon nanotubes and the suspended area. As a demonstration, the soft thin skin was integrated into an artificial jellyfish robot, enabling the realization of a closed-loop feedback system for dynamic sensory processing, signal processing, and further 3D morphing-induced fluorescent color change, demonstrating significant potentials in underwater visual display, danger warning, and environmental exploration.

Monodisperse nanosheet mesophases

Self-assemblies of anisotropic colloidal particles into colloidal liquid crystals and well-defined superlattices are of great interest for hierarchical nanofabrications that are applicable for various functional materials. Inorganic nanosheets obtained by exfoliation of layered crystals have been highlighted as the intriguing colloidal units; however, the size polydispersity of the nanosheets has been preventing precise design of the assembled structures and their functions. Here, we demonstrate that the anionic titanate nanosheets with monodisperse size reversibly form very unusual superstructured mesophases through finely tunable weak attractive interactions between the nanosheets. Transmission electron microscopy, polarizing optical microscopy, small-angle x-ray scattering, and confocal laser scanning microscopy clarified the reversible formation of the mesophases (columnar nanofibers, columnar nematic liquid crystals, and columnar nanofiber bundles) as controlled by counter cations, nanosheet concentration, solvent, and temperature.

The luminescent properties of metal halides are determined by the inorganic framework and solvent molecules

The luminescent properties of metal halides are usually considered to be determined by the inorganic framework. In this work, we propose that the luminescent properties of metal halides are determined by both the inorganic framework and the solvent [Denoted as (inorganic framework + n·solvent molecules), n = 0, 1, 2…] through the abundant solvatochromic or thermochromic effect of tetrabutylammonium lead bromides [TPB, T = TBA (tetrabutylammonium), P = Pb (lead), B = Br (bromide)] containing water (H2O) and ethanol (EtOH). One-dimensional (1D) TPB can form ligands of [[Pb5Br18]8- + 2H2O(H)], [[Pb5Br18]8- + 2H2O(H) + 2H2O] and [[Pb5Br18]8- + 2EtOH] by solvent or heat treatment has completely different luminescent properties resulting from different solvents. They exhibit broad spectral emission due to strong electron-phonon coupling, as do other 1D metal halides. However, the 1D TPB containing only [[Pb5Br18]8- achieves extremely rare narrow-band green emission, with full width at half maximum (FWHM) of 21 nm at room temperature and 8 nm at low temperature, color gamut covers 95 % of the International Telecommunication Union recommendation 2020 standard. This work provides new guidance for the modulation of photophysical properties of metal halides, as well as new materials for the display and smart materials fields.

A magnetically responsive photonic crystal of graphene oxide nanosheets

Magnetically responsive photonic crystals of colloidal nanosheets hold great promise for various applications. Here, we systematically investigated the magnetically responsive behavior of a photonic crystal consisting of graphene oxide (GO) nanosheets and water. After applying a 12 T magnetic field perpendicular and parallel to the observation direction, the photonic crystal exhibited a more vivid structural color and no structural color, respectively, based on the magnetic orientation of GO nanosheets. The reflection wavelength can be modulated by varying the GO concentration, and the peak intensity can be basically enhanced by increasing both the time and strength of the magnetic application. To improve color quality, we developed a novel approach of alternately applying a magnetic field to two orthogonal directions, instead of using a rotating magnetic field. Finally, we achieved color switching by changing the direction of applied magnetic fields.

Nanostructure Control in Zinc Oxide Films and Microfibers through Bioinspired Synthesis of Liquid-Crystalline Zinc Hydroxide Carbonate; Formation of Free-Standing Materials in Centimeter-Level Lengths

Free-standing zinc oxide in the forms of films and fibrous materials are expected to be used as functional devices such as piezoelectric devices and catalyst filters without being limited by the growth substrate. Herein, a synthetic morphology-control method for 2D and 1D free-standing ZnO materials with ordered and nanoporous structures by conversion of liquid-crystalline (LC) zinc hydroxide carbonate (ZHC) nanoplates is reported. As a new colloidal liquid crystal, the LC ZHC nanoplate precursors are obtained by a biomineralization-inspired method. The approach is to control the morphology and crystallographic orientation of ZHC crystals by using acidic macromolecules. Their nano-scale and oriented structures are examined. The LC oriented ZHC nanoplates have led to the synthesis of free-standing films and microfibers of ZHC in centimeter-level lengths, with the successful thermal conversion into free-standing films and microfibers of ZnO. The resultant ZnO films and ZnO microfibers have nanoporous structures and preferential crystallographic orientations that preserve the alignment of ZHC nanoplates before conversion.

Perovskite Smart Windows: The Light Manipulator in Energy-Efficient Buildings

Uncontrolled sunlight entering through windows contributes to substantial heating and cooling demands in buildings, which leads to high energy consumption from the buildings. Recently, perovskite smart windows have emerged as innovative energy-saving technologies, offering the potential to adaptively control indoor solar heat gain through their impressive sunlight modulation capabilities. Moreover, harnessing the high-efficiency photovoltaic properties of perovskite materials, these windows have the potential to generate power, thereby realizing more advanced windows with combined light modulation and energy harvesting capabilities. This review summarizes the recent advancements in various chromic perovskite materials for achieving light modulation, focusing on both perovskite structures and underlying switching mechanisms. The discussion also encompasses device engineering strategies for smart windows, including the improvement of their optical and transition performance, durability, combination with electricity generation, and the evaluation of their energy-saving performance in building applications. Furthermore, the challenges and opportunities associated with perovskite smart windows are explicated, aimed at stimulating more academic research and advancing their pragmatic implementation for building energy efficiency and sustainability.

Magnetic field-responsive graphene oxide photonic liquids

Modifying the environment around particles (e.g., introducing a secondary phase or external field) can affect the way they interact and assemble, thereby giving control over the physical properties of a dynamic system. Here, graphene oxide (GO) photonic liquids that respond to a magnetic field are demonstrated for the first time. Magnetic nanoparticles are used to provide a continuous magnetizable liquid environment around the GO liquid crystalline domains. In response to a magnetic field, the alignment of magnetic nanoparticles, coupled with the diamagnetic property of GO nanosheets, drives the reorientation and alignment of the nanosheets, enabling switchable photonic properties using a permanent magnet. This phenomenon is anticipated to be extendable to other relevant photonic systems of shape-anisotropic nanoparticles and may open up opportunities for developing GO-based optical materials and devices.

Low-Hysteresis and High-Toughness Hydrogels Regulated by Porous Cationic Polymers: the Effect of Counteranions

Service life and range of polymer materials is heavily reliant on their elasticity and mechanical stability under long-term loading. Slippage of chain segments under load leads to significant hysteresis of the hydrogels, limiting its repeatability and mechanical stability. Achieving the desired elasticity exceeding that of rubber is a great challenge for hydrogels, particularly when subjected to large deformations. Here, low-hysteresis and high-toughness hydrogels were developed through controllable interactions of porous cationic polymers (PCPs) with adjustable counteranions, including reversible bonding of PCP frameworks/polymer segments (polyacrylamide, PAAm) and counteranions/PAAm. This strategy reduces chain segment slippage under load, endowing the PCP-based hydrogels (PCP-gels) with good elasticity under large deformations (7 % hysteresis at a strain ratio of 40). Furthermore, due to the enlarged chain segments entanglement by PCP, the PCP-gels exhibit large strain (13000 %), significantly enhanced toughness (68 MJ m-3 ), high fracture energy (43.1 kJ m-2 ), and fatigue resistance. The unique properties of these elastic PCP-gels have promising applications in the field of flexible sensors.

Coloration on Bluish Alginate Films with Amorphous Heterogeneity Thereof

Using sodium alginate (Alg) aqueous solution containing indigo carmine (IdC) at various concentrations we characterized the rippled surface pattern with micro-spacing on a flexible film as intriguing bluish Alg-IdC iridescence. The characterization was performed using Fourier-transform infrared spectroscopy, ultraviolet-visible spectroscopy, field emission scanning electron microscopy, atomic force microscopy, electron microscopy, differential scanning calorimetry, thermogravimetric analysis, X-ray diffraction analysis, and photoluminescence detection. The edge pattern on the film had a maximum depth of 825 nm, a peak-to-peak distance of 63.0 nm, and an average distance of 2.34 nm. The center of the pattern had a maximum depth of 343 nm and a peak-to-peak distance of 162 nm. The pattern spacing rippled irregularly, widening toward the center and narrowing toward the edges. The rippled nano-patterned areas effectively generated iridescence. The ultraviolet absorption spectra of the mixture in the 270 and 615 nm ranges were the same for both the iridescent and non-iridescent film surfaces. By adding Ag+ ions to Alg-IdC, self-assembled microspheres were formed, and conductivity was improved. Cross-linked bluish materials were immediately formed by the addition of Ca2+ ions, and the film was prepared by controlling their concentration. This flexible film can be used in applications such as eco-friendly camouflage, anti-counterfeiting, QR code materials for imaging/sensing, and smart hybrid displays.

Nacre-inspired layered composite gels with broad tunable mechanical strength and structural color for stress visualization

The brick-and-mortar architecture of nacre shells brings radiant structural colors, high toughness, and strength, inspiring numerous designs for structural and optical materials. However, constructing structural color is not always easy, especially among soft materials where aligning components against random and dynamically active environments is generally difficult. Here, we propose a composite organohydrogel capable of visualizing multiple levels of stress, featuring broad tunable mechanical properties, dynamic mechanochromism, deep low working temperatures, and anti-drying attributes. In the composite gels, the intercalation between α-zirconium phosphate (α-ZrP) nanoplates and poly-(diacetone acrylamide-co-acrylamide) is induced by shear-orientation-assisted self-assembly followed by solvent replacement. The highly tailorable (from ∼780 nm to ∼445 nm) range of colors was achieved by regulating the concentration of α-ZrP and glycerol inside the matrix. With the help from glycerol, the composite gels exhibited long-term stability (7 d) in the arid condition and remarkable low-temperature tolerance (-80 °C). The extraordinary mechanical property (compressive strength up to 119 MPa) of composite gels is achieved by the assembled α-ZrP plates with a small aspect ratio, high negative charge repulsion, and abundant hydrogen bonding sites. As a result, the mechanochromic sensor based on the composite gel enjoys a wide range of stress detection (0-1862 KPa). This study provides a new strategy for constructing high strength structural-colored gels, opening up opportunities for sensitive yet strong mechanochromic sensors in extreme environments.

Mechanochromic Optical/Electrical Skin for Ultrasensitive Dual-Signal Sensing

Following earlier research efforts dedicated to the realization of multifunctional sensing, recent developments of artificial skins endeavor to go beyond human sensory functions by integrating interactive visualization of strain and pressure stimuli. Inspired by the microcracked structure of spider slit organs and the mechanochromic mechanism of chameleons, this work aims to design a flexible optical/electrical skin (OE-skin) capable of responding to complex stimuli with interactive feedback of human-readable structural colors. The OE-skin consists of an ionic electrode combined with an elastomer dielectric layer, a chromotropic layer containing photonic crystals and a conductive carbon nanotube/MXene layer. The electrode/dielectric layers function as a capacitive pressure sensor. The mechanochromic photonic crystals of ferroferric oxide-carbon magnetic arrays embedded in the gelatin/polyacrylamide stretchable hydrogel film perceive strain and pressure stimuli with bright color switching outputs in the full visible spectrum. The underlying microcracked conductive layer is devoted to ultrasensitive strain sensing with a gauge factor of 191.8. The multilayered OE-skin delivers an ultrafast, accurate response for capacitive pressure sensing with a detection limit of 75 Pa and long-term stability of 5000 cycles, while visualizing complex deformations in the form of high-resolution spatial colors. These findings offer deep insights into the rational design of OE-skins as multifunctional sensing devices.

Bioinspired multichannel colorful encryption through kirigami activating grating

Optical encryption, exploiting degrees of freedom of light as parameters to encode and decode information, plays an indispensable role in our daily life. Responsive structural color materials can give real-time visible feedback to external stimuli and provide ideal candidates for optical encryption. However, the development of existing responsive structural color materials is hindered by poor repeatability and long feedback time. Meanwhile, there are only few strategies to exploit structural colors in multichannel information encryption. Herein, bioinspired by the structural color variation due to a change in angle arising from the movement of animal's scales or feathers, we developed a general multichannel information encryption strategy using a two-dimensional deformable kirigami arranging orientations of the grating arrays by design. The kirigami grating sheet shows rapid, repeatable, and programmable color change. This strategy utilizes the topological space deformation to guide the change of optical property, which suggests new possibilities for spatial and spectral encryption as well as mechano-sensing and camouflage.

Recent advances in conductive hydrogels: classifications, properties, and applications

Hydrogel-based conductive materials for smart wearable devices have attracted increasing attention due to their excellent flexibility, versatility, and outstanding biocompatibility. This review presents the recent advances in multifunctional conductive hydrogels for electronic devices. First, conductive hydrogels with different components are discussed, including pure single network hydrogels based on conductive polymers, single network hydrogels with additional conductive additives (i.e., nanoparticles, nanowires, and nanosheets), double network hydrogels based on conductive polymers, and double network hydrogels with additional conductive additives. Second, conductive hydrogels with a variety of functionalities, including self-healing, super toughness, self-growing, adhesive, anti-swelling, antibacterial, structural color, hydrophobic, anti-freezing, shape memory and external stimulus responsiveness are introduced in detail. Third, the applications of hydrogels in flexible devices are illustrated (i.e., strain sensors, supercapacitors, touch panels, triboelectric nanogenerator, bioelectronic devices, and robot). Next, the current challenges facing hydrogels are summarized. Finally, an imaginative but reasonable outlook is given, which aims to drive further development in the future.

Heterogeneous Structural Color Conductive Photonic Organohydrogel Fibers with Alternating Single and Dual Networks

Intelligent interactive electronic devices can dynamically respond to and visualize various stimuli, promoting the rapid development of flexible electronics. In this paper, an alternating single- and dual-network design strategy was developed for ingeniously constructing an interactive electronic fiber sensor with heterogeneous structural color (HSCEF sensor). The resulting sensor can rapidly output the synchronous electrical and optical dual signals under strain by adjusting the transport distance of conductive ions and the lattice spacing of the photonic crystal (∼200 ms). Meanwhile, the addition of low-freezing-point glycerol endowed the HSCEF sensor with excellent low-temperature tolerance (-25 °C) and cyclic stability. Notably, benefiting from the alternating single- and dual-network structure, the HSCEF sensor exhibits attractive heterogeneous structural color, which achieves colorimetric changes in the full visible light region with high mechanochromic sensitivity (2.25 nm %^-1) and large wavelength shift (Δλ ∼ 225 nm). An intelligent wearable interactive sensor is finally used for real-time dynamic detection of joint movements, realizing precise resolution of different amplitudes. This work provides a general strategy to transform conventional photonic gels into heterogeneous structural color ones, and the developed new interactive sensor with rich optical information could be further used for visual health and exercise monitoring, intelligent soft robotics, wearable sensors, etc.

Rapid Color-Switching of MnO2 Hollow-Nanosphere Films in Dynamic Water Vapor for Reversible Optical Encryption

Drop-casting manganese oxide (MnO₂ ) hollow nanospheres synthesized via a simple surface-initiated redox route produces thin films exhibiting angle-independent structural colors. The colors can rapidly change in response to high-humidity dynamic water vapor (relative humidity > 90%) with excellent reversibility. When the film is triggered by dynamic water vapor with a relative humidity of ≈100%, the color changes with an optimal wavelength redshift of ≈60 nm at ≈600 ms while there is no shift under static water vapor. The unique selective response originates from the nanoscale porosity formed in the shells by randomly stacked MnO₂ nanosheets, which enhances the capillary condensation of dynamic water vapor and promotes the change of their effective refractive index for rapid color switching. The repeated color-switching tests over 100 times confirm the durability and reversibility of the MnO₂ film. The potential of these films for applications in anti-counterfeiting and information encryption is further demonstrated by reversible encoding and decoding initiated exclusively by exposure to human breath.

Magneto-Orientation of Magnetic Double Stacks for Patterned Anisotropic Hydrogels with Multiple Responses and Modulable Motions

Reported here is a multi-response anisotropic poly(N-isopropylacrylamide) hydrogel developed by using a rotating magnetic field to align magnetic double stacks (MDSs) that are fixed by polymerization. The magneto-orientation of MDSs originates from the unique structure with γ-Fe2 O3 nanoparticles sandwiched by two silicate nanosheets. The resultant gels not only exhibit anisotropic optical and mechanical properties but also show anisotropic responses to temperature and light. Gels with complex ordered structures of MDSs are further devised by multi-step magnetic orientation and photolithographic polymerization. These gels show varied birefringence patterns with potentials as information materials, and can deform into specific configurations upon stimulations. Multi-gait motions are further realized in the patterned gel through dynamic deformation under spatiotemporal light and friction regulation by imposed magnetic force. The magneto-orientation assisted fabrication of hydrogels with anisotropic structures and additional functions should bring opportunities for gel materials in biomedical devices, soft actuators/robots, etc.

Toward High Sensitivity: Perspective on Colorimetric Photonic Crystal Sensors

The sensitivity of colorimetric photonic crystal (PC) sensors have been significantly improved with the advancement of deformable structural color materials, structures design, sensing signal analysis methods, and fabrication strategies. In this perspective, the strategies toward high-sensitivity colorimetric PC sensors are discussed, from the perspectives of molecular design, single sensor construction, and multisensor assembly, which include incorporation of flexible polymer chains, construction of strong sensor-analyte interactions, incorporation of more soft materials, construction of stimuli-angle/orientation relationship, design of colorimetric sensors in series, and assembly of colorimetric PC sensors in parallel. Based on these strategies, progress of high-sensitivity colorimetric PC sensors in recent years is summarized, in terms of mechano-sensors and chemo-/biosensors. Specifically, PC based optical-electrical dual-signal sensing devices are included. Finally, the future development and challenges of high-sensitivity colorimetric PC sensors are presented, in regards to deformable properties, optical properties, analysis methods, and fabrication strategies.

Advanced Functional Liquid Crystals

Liquid crystals have been intensively studied as functional materials. Recently, integration of various disciplines has led to new directions in the design of functional liquid-crystalline materials in the fields of energy, water, photonics, actuation, sensing, and biotechnology. Here, recent advances in functional liquid crystals based on polymers, supramolecular complexes, gels, colloids, and inorganic-based hybrids are reviewed, from design strategies to functionalization of these materials and interfaces. New insights into liquid crystals provided by significant progress in advanced measurements and computational simulations, which enhance new design and functionalization of liquid-crystalline materials, are also discussed.

Formation of a Giant Anisotropically Ordered Assembled Structure of Inorganic Nanosheets through an Optically Induced Stream

Formation of a desirable submillimeter-scaled assembled structure of particles in the colloid is a difficult subject in colloidal chemistry. Herein, a submillimeter-scaled ordered assembled structure consisting of highly anisotropic two-dimensional plate-like particles, niobate nanosheets, was obtained through an optical manipulation technique that was assisted by a scattering-force-induced stream. A 532 nm continuous wave laser beam with a power of 400 mW was used to illuminate a liquid crystalline niobate nanosheet colloid from the bottom side of a sample cell, inducing the stream of oriented nanosheets toward the upper side of the sample cell. As a result, a 200 μm ordered assembled structure consisting of oriented nanosheets was formed. The assembled structure was also characterized by two-dimensional anisotropy, reflecting that the highly anisotropic morphologies of each nanosheet and the shape of that structure were dependent on the polarization of incident illumination. This study has revealed a new noncontact and on-demand way to obtain submillimeter-scaled ordered anisotropic colloidal assembled structures of nanosized particles such as nanosheets, contributing to fundamental materials science and expanding the utilities of nanosheets.

Nematic suspension of a microporous layered silicate obtained by forceless spontaneous delamination via repulsive osmotic swelling for casting high-barrier all-inorganic films

Exploiting the full potential of layered materials for a broad range of applications requires delamination into functional nanosheets. Delamination via repulsive osmotic swelling is driven by thermodynamics and represents the most gentle route to obtain nematic liquid crystals consisting exclusively of single-layer nanosheets. This mechanism was, however, long limited to very few compounds, including 2:1-type clay minerals, layered titanates, or niobates. Despite the great potential of zeolites and their microporous layered counterparts, nanosheet production is challenging and troublesome, and published procedures implied the use of some shearing forces. Here, we present a scalable, eco-friendly, and utter delamination of the microporous layered silicate ilerite into single-layer nanosheets that extends repulsive delamination to the class of layered zeolites. As the sheet diameter is preserved, nematic suspensions with cofacial nanosheets of ≈9000 aspect ratio are obtained that can be cast into oriented films, e.g., for barrier applications.

Recent Progress in Responsive Structural Color

Structural color has been regarded as an ideal alternative to pigments because of the advantages of environmental friendliness, resistance to fading, and dynamic regulation. Responsive structural color can give real-time visible feedback to external stimuli and thus has great prospects in many applications, such as displays, sensing, anticounterfeiting, information storage, and healthcare monitoring. In this Perspective, we elucidate basic concepts, controllable fabrications, and promising applications of responsive structural colors. In particular, we systematically summarize the general regulation mode of all kinds of responsive structural color systems. First, we introduce the basic chromogenic structures as well as the regulation modes of responsive structural color. Second, we present the fabrication methods of patterned structural color. Then, the promising applications of responsive structural color systems are highlighted in detail. Finally, we present the existing challenges and future perspectives on responsive structural colors.

Angular-Independent Structural Colors of Clay Dispersions

Clay mineral nanosheet colloids were found to show angular-independent structural colors after desalting. Naked-eye observation and UV-visible reflectance spectra showed that the color is tuned by varying the average nanosheet size and nanosheet concentration. The low angular-dependence of the structural color was also clarified by these observations, which is the first case for a nanosheet system. The present system is expected as an environmentally benign and low-cost structural color material for various applications.

Stable graphene oxide hydrophobic photonic liquids

Graphene oxide (GO) is an important nanomaterial for producing photonic liquids due to its ability to display full-color reflections in water. However, the poor stability of GO photonic liquids and unsatisfactory dispersibility of GO nanosheets in hydrophobic liquid media have been significant drawbacks to developing photonic materials based on GO. Here, stable GO hydrophobic photonic liquids are demonstrated for the first time. GO nanosheets are directed into different hydrophobic liquid media, including reactive liquid precursors like tetraethoxysilane and ethyl acrylate, in the presence of phase transfer additives. These liquids exhibit tunable reflection wavelength up to ∼1300 nm with improved stability relative to aqueous GO photonic suspensions at elevated temperatures or under ambient conditions. Supported by an entropy-driven depletion mechanism, hydrophobic additives can effectively mediate the self-assembly of GO to produce tunable photonic liquids without the need to adjust GO concentrations. Furthermore, simultaneous infrared and visible light reflection can be achieved, enabling infrared photonic GO liquids to display visible colors. The improved stability and tunable photonic properties of hydrophobic GO liquids will open a way for developing GO-based optical materials and devices.

Bright, noniridescent structural coloration from clay mineral nanosheet suspensions

Structural colors originate by constructive interference following reflection and scattering of light from nanostructures with periodicity comparable to visible light wavelengths. Bright and noniridescent structural colorations are highly desirable. Here, we demonstrate that bright noniridescence structural coloration can be easily and rapidly achieved from suspended two-dimensional nanosheets of a clay mineral. We show that brightness is enormously improved by using double clay nanosheets, thus optimizing the clay refractive index that otherwise hampers structural coloration from such systems. Intralayer distances, and thus the structural colors, can be precisely and reproducibly controlled by clay concentration and ionic strength independently, and noniridescence is readily and effortlessly obtained in this system. Embedding such clay-designed nanosheets in recyclable solid matrices could provide tunable vivid coloration and mechanical strength and stability at the same time, thus opening a previously unknown venue for sustainable structural coloration.

Fine tuning the structural colours of photonic nanosheet suspensions by polymer doping

Aqueous suspensions of nanosheets are readily obtained by exfoliating low-dimensional mineral compounds like H₃Sb₃P₂O₁₄. The nanosheets self-organize, at low concentration, into a periodic stack of membranes, i.e. a lamellar liquid-crystalline phase. Due to the dilution, this stack has a large period of a few hundred nanometres, it behaves as a 1-dimensional photonic material and displays structural colours. We experimentally investigated the dependence of the period on the nanosheet concentration. We theoretically showed that it cannot be explained by the usual DLVO interaction between uniform lamellae but that the particulate nature of nanosheet-laden membranes must be considered. Moreover, we observed that adding small amounts of 100 kDa poly(ethylene oxide) (PEO) decreases the period and allows tuning the colour throughout the visible range. PEO adsorbs on the nanosheets, inducing a strong reduction of the nanosheet charge. This is probably due to the Lewis-base character of the EO units of PEO that become protonated at the low pH of the system, an interpretation supported by theoretical modeling. Oddly enough, adding small amounts of 1 MDa PEO has the opposite effect of increasing the period, suggesting the presence of an additional intermembrane repulsion not yet identified. From an applied perspective, our work shows how the colours of these 1-dimensional photonic materials can easily be tuned not only by varying the nanosheet concentration (which might entail a phase transition) but also by adding PEO. From a theoretical perspective, our approach represents a necessary step towards establishing the phase diagram of aqueous suspensions of charged nanosheets.

Piezochromism of cyanostilbene derivatives: a small structural alteration makes a big photophysical difference

We designed two HLCT-active luminophores with high PLYQs. Under high pressure, DPMO presents better sensitivity and a smaller PL wavelength redshift than TPPA due to the high PLYQs and the strong CT state.