1
|
Liu Y, Zhou C, Chen L, Du J, Li Q, Lu C, Tan L, Huang X, Liu J, Dong L. Self-standing membranes for separation: Achievements and opportunities. Adv Colloid Interface Sci 2024; 332:103269. [PMID: 39128434 DOI: 10.1016/j.cis.2024.103269] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/13/2024] [Revised: 05/28/2024] [Accepted: 08/03/2024] [Indexed: 08/13/2024]
Abstract
Supported membranes and mixed matrix membranes have a limitation of harming the mass transfer due to the incompatibility between the support layer or the matrix and the active components of the membrane. Self-standing membranes, which could structurally abandon the support layer, altogether avoid the adverse effect, thus greatly facilitating the transmembrane mass transfer process. However, the abandonment of the support layer also reduces the membrane's mechanical properties and formability. In this review, our emphasis will be on self-standing membranes within the realm of materials and separation engineering. We will explore the materials employed in the fabrication of self-standing membranes, highlighting their ability to simultaneously enhance membrane performance and promote self-standing characteristics. Additionally, we will delve into the diverse techniques utilized for crafting self-standing membranes, encompassing interfacial polymerization, filtration, solvent casting, Langmuir-Blodgett & layer-by-layer assembly, electrospinning, compression, etc. Throughout the discussion, the merits and drawbacks associated with each of these preparation methods were elucidated. We also provide a brief overview of the applications of self-standing membranes, including water purification, gas separation, organic solvent nanofiltration, electrochemistry, and membrane reactor, as well as a brief description of the general strategies for performance enhancement of self-standing membranes. Finally, the current status of self-standing membranes and the challenges they may encounter were discussed.
Collapse
Affiliation(s)
- Yunhao Liu
- School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 400044, PR China
| | - Cailong Zhou
- School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 400044, PR China.
| | - Li Chen
- School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 400044, PR China
| | - Jingcheng Du
- Department of Environmental Science and Engineering, University of Science and Technology of China, Hefei 230052, PR China
| | - Qun Li
- School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 400044, PR China
| | - Chenyang Lu
- School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 400044, PR China
| | - Luxi Tan
- School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 400044, PR China.
| | - Xiaowei Huang
- Department of Pharmacy, Quanzhou First Hospital Affiliated to Fujian Medical University, Quanzhou 362000, PR China.
| | - Jiangtao Liu
- Department of Environmental Science and Engineering, University of Science and Technology of China, Hefei 230052, PR China
| | - Lichun Dong
- School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 400044, PR China
| |
Collapse
|
2
|
Zeng Q, Guo Y, Zhao L, Wang T, Zhang L, Fan F, Fu Y. Preparation of Free-Standing Defect-Free ZIF-8/PVA Membranes via Confined Reaction at the Quasi-Interface. ACS APPLIED MATERIALS & INTERFACES 2024; 16:40243-40249. [PMID: 39028833 DOI: 10.1021/acsami.4c08304] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 07/21/2024]
Abstract
Developing a facile strategy to synthesize free-standing defect-free metal-organic framework (MOF) membranes with high separation selectivity and good mechanical stability is very appealing but challenging. Herein, by confining the reaction of metal and ligand at the quasi-interface, a representative membrane composed of a continuous ZIF-8 layer and poly(vinyl alcohol) (PVA) was fabricated. The continuous ZIF-8 layer endowed the membrane with high separation efficiency, while PVA acted as a filler to eliminate the defection, synergistically achieving high selective ion transport and good mechanical stability. The continuous defect-free ZIF-8/PVA membrane showed excellent separation performance of selective ion transport with high Li+ permeance of 17.83 mol·m-2·h-1 as well as decent Li+/Mg2+ and Li+/Ca2+ selectivities of 24.60 and 244.58, respectively. The separation performance of the ZIF-8/PVA membrane remained stable after 10% strain, indicating its good mechanical stability. This work will promote the development of MOF-based membranes in practical applications.
Collapse
Affiliation(s)
- Qingqi Zeng
- Department of Chemistry, College of Sciences, Northeastern University, Shenyang110819, P. R. China
| | - Yan Guo
- Department of Chemistry, College of Sciences, Northeastern University, Shenyang110819, P. R. China
| | - Lin Zhao
- Department of Chemistry, College of Sciences, Northeastern University, Shenyang110819, P. R. China
| | - Tieqiang Wang
- Department of Chemistry, College of Sciences, Northeastern University, Shenyang110819, P. R. China
| | - Liying Zhang
- Department of Chemistry, College of Sciences, Northeastern University, Shenyang110819, P. R. China
| | - Fuqiang Fan
- Department of Chemistry, College of Sciences, Northeastern University, Shenyang110819, P. R. China
| | - Yu Fu
- Department of Chemistry, College of Sciences, Northeastern University, Shenyang110819, P. R. China
| |
Collapse
|
3
|
Wang X, Qi H, Shao Y, Zhao M, Chen H, Chen Y, Ying Y, Wang Y. Extrusion Printing of Surface-Functionalized Metal-Organic Framework Inks for a High-Performance Wearable Volatile Organic Compound Sensor. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2024; 11:e2400207. [PMID: 38655847 PMCID: PMC11220709 DOI: 10.1002/advs.202400207] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/07/2024] [Revised: 04/11/2024] [Indexed: 04/26/2024]
Abstract
Wearable sensors hold immense potential for real-time and non-destructive sensing of volatile organic compounds (VOCs), requiring both efficient sensing performance and robust mechanical properties. However, conventional colorimetric sensor arrays, acting as artificial olfactory systems for highly selective VOC profiling, often fail to meet these requirements simultaneously. Here, a high-performance wearable sensor array for VOC visual detection is proposed by extrusion printing of hybrid inks containing surface-functionalized sensing materials. Surface-modified hydrophobic polydimethylsiloxane (PDMS) improves the humidity resistance and VOC sensitivity of PDMS-coated dye/metal-organic frameworks (MOFs) composites. It also enhances their dispersion within liquid PDMS matrix, thereby promoting the hybrid liquid as high-quality extrusion-printing inks. The inks enable direct and precise printing on diverse substrates, forming a uniform and high particle-loading (70 wt%) film. The printed film on a flexible PDMS substrate demonstrates satisfactory flexibility and stretchability while retaining excellent sensing performance from dye/MOFs@PDMS particles. Further, the printed sensor array exhibits enhanced sensitivity to sub-ppm VOC levels, remarkable resistance to high relative humidity (RH) of 90%, and the differentiation ability for eight distinct VOCs. Finally, the wearable sensor proves practical by in situ monitoring of wheat scab-related VOC biomarkers. This study presents a versatile strategy for designing effective wearable gas sensors with widespread applications.
Collapse
Affiliation(s)
- Xiao Wang
- School of Biosystems Engineering and Food ScienceZhejiang UniversityHangzhou310058P. R. China
- Key Laboratory of Intelligent Equipment and Robotics for Agriculture of Zhejiang ProvinceHangzhou310058P. R. China
| | - Hao Qi
- State Key Laboratory of Rice BiologyZhejiang UniversityHangzhou310058P. R. China
- Key Laboratory of Molecular Biology of Crop Pathogens and Insects, Institute of BiotechnologyZhejiang UniversityHangzhou310058P. R. China
| | - Yuzhou Shao
- School of Biosystems Engineering and Food ScienceZhejiang UniversityHangzhou310058P. R. China
- Key Laboratory of Intelligent Equipment and Robotics for Agriculture of Zhejiang ProvinceHangzhou310058P. R. China
| | - Mingming Zhao
- School of Biosystems Engineering and Food ScienceZhejiang UniversityHangzhou310058P. R. China
- Key Laboratory of Intelligent Equipment and Robotics for Agriculture of Zhejiang ProvinceHangzhou310058P. R. China
| | - Huayun Chen
- School of Biosystems Engineering and Food ScienceZhejiang UniversityHangzhou310058P. R. China
- Key Laboratory of Intelligent Equipment and Robotics for Agriculture of Zhejiang ProvinceHangzhou310058P. R. China
| | - Yun Chen
- State Key Laboratory of Rice BiologyZhejiang UniversityHangzhou310058P. R. China
- Key Laboratory of Molecular Biology of Crop Pathogens and Insects, Institute of BiotechnologyZhejiang UniversityHangzhou310058P. R. China
| | - Yibin Ying
- School of Biosystems Engineering and Food ScienceZhejiang UniversityHangzhou310058P. R. China
- Key Laboratory of Intelligent Equipment and Robotics for Agriculture of Zhejiang ProvinceHangzhou310058P. R. China
- ZJU‐Hangzhou Global Scientific and Technological Innovation CenterHangzhou310058P. R. China
| | - Yixian Wang
- School of Biosystems Engineering and Food ScienceZhejiang UniversityHangzhou310058P. R. China
- Key Laboratory of Intelligent Equipment and Robotics for Agriculture of Zhejiang ProvinceHangzhou310058P. R. China
- ZJU‐Hangzhou Global Scientific and Technological Innovation CenterHangzhou310058P. R. China
| |
Collapse
|
4
|
Li J, Shen J, Hou T, Tang H, Zeng C, Xiao K, Hou Y, Wang B. A Self-Assembled MOF-Escherichia Coli Hybrid System for Light-Driven Fuels and Valuable Chemicals Synthesis. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2024; 11:e2308597. [PMID: 38664984 PMCID: PMC11220693 DOI: 10.1002/advs.202308597] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/10/2023] [Revised: 02/25/2024] [Indexed: 07/04/2024]
Abstract
The development of semi-artificial photosynthetic systems, which integrate metal-organic frameworks (MOFs) with industrial microbial cell factories for light-driven synthesis of fuels and valuable chemicals, represents a highly promising avenue for both research advancements and practical applications. In this study, an MOF (PCN-222) utilizing racemic-(4-carboxyphenyl) porphyrin and zirconium chloride (ZrCl4) as primary constituents is synthesized. Employing a self-assembly process, a hybrid system is constructed, integrating engineered Escherichia coli (E. coli) to investigate light-driven hydrogen and lysine production. These results demonstrate that the light-irradiated biohybrid system efficiently produce H2 with a quantum efficiency of 0.75% under full spectrum illumination, the elevated intracellular reducing power NADPH is also observed. By optimizing the conditions, the biohybrid system achieves a maximum lysine production of 18.25 mg L-1, surpassing that of pure bacteria by 332%. Further investigations into interfacial electron transfer mechanisms reveals that PCN-222 efficiently captures light and facilitates the transfer of photo-generated electrons into E. coli cells. It is proposed that the interfacial energy transfer process is mediated by riboflavin, with facilitation by secreted small organic acids acting as hole scavengers for PCN-222. This study establishes a crucial foundation for future research into the light-driven biomanufacturing using E. coli-based hybrid systems.
Collapse
Affiliation(s)
- Jialu Li
- CAS Key Laboratory of Quantitative Engineering BiologyShenzhen Institute of Synthetic BiologyShenzhen Institute of Advanced TechnologyChinese Academy of SciencesShenzhen518055China
- School of ResourcesEnvironment and MaterialsGuangxi UniversityNanning530004China
| | - Junfeng Shen
- CAS Key Laboratory of Quantitative Engineering BiologyShenzhen Institute of Synthetic BiologyShenzhen Institute of Advanced TechnologyChinese Academy of SciencesShenzhen518055China
| | - Tianfeng Hou
- CAS Key Laboratory of Quantitative Engineering BiologyShenzhen Institute of Synthetic BiologyShenzhen Institute of Advanced TechnologyChinese Academy of SciencesShenzhen518055China
| | - Hongting Tang
- CAS Key Laboratory of Quantitative Engineering BiologyShenzhen Institute of Synthetic BiologyShenzhen Institute of Advanced TechnologyChinese Academy of SciencesShenzhen518055China
| | - Cuiping Zeng
- CAS Key Laboratory of Quantitative Engineering BiologyShenzhen Institute of Synthetic BiologyShenzhen Institute of Advanced TechnologyChinese Academy of SciencesShenzhen518055China
| | - Kemeng Xiao
- CAS Key Laboratory of Quantitative Engineering BiologyShenzhen Institute of Synthetic BiologyShenzhen Institute of Advanced TechnologyChinese Academy of SciencesShenzhen518055China
- Department of Chemistry and Center for Cell and Developmental BiologyThe Chinese University of Hong KongShatinHong Kong999077China
| | - Yanping Hou
- School of ResourcesEnvironment and MaterialsGuangxi UniversityNanning530004China
| | - Bo Wang
- CAS Key Laboratory of Quantitative Engineering BiologyShenzhen Institute of Synthetic BiologyShenzhen Institute of Advanced TechnologyChinese Academy of SciencesShenzhen518055China
| |
Collapse
|
5
|
Qi A, Li C, Evans JD, Zhao Y, Li T. Self-Sorting of Interfacial Compatibility in MOF-Based Mixed Matrix Membranes. Angew Chem Int Ed Engl 2024; 63:e202400474. [PMID: 38590031 DOI: 10.1002/anie.202400474] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/08/2024] [Revised: 03/29/2024] [Accepted: 04/08/2024] [Indexed: 04/10/2024]
Abstract
Metal-organic framework (MOF)-based mixed matrix membranes (MMMs) have shown great promises to overcome the performance upper limit of polymeric membranes for various gas separation processes. However, the gas separation properties of the MMMs largely depend on the MOF-polymer interfacial compatibility which is a metric difficult to quantify. In most cases, whether a MOF filler and a polymer matrix make a good pair is not revealed until the gas transport experiments are performed. This is because there is a lack of characterization techniques to directly probe the MOF-polymer interfacial compatibility. In this work, we demonstrate a self-sorting method to rank the interface compatibility among several MOF-polymer pairs. By mixing one MOF with two polymers in an MMM, the demixing of two polymers will form two polymer domains. The MOF particles will preferably partition into the "preferred" polymer domain due to their higher interfacial affinity. By scanning different polymer pairs, a rank of MOF-polymer interfacial compatibility from high to low can be obtained. Moreover, based on this ranking, it was also found that a highly compatible MOF-polymer pair suggested by this method also corresponds to a more predictable MMM gas separation performance.
Collapse
Affiliation(s)
- Anheng Qi
- School of Physical Science and Technology, ShanghaiTech University, Shanghai, 201210, P. R. China
| | - Conger Li
- School of Physical Science and Technology, ShanghaiTech University, Shanghai, 201210, P. R. China
| | - Jack D Evans
- School of Physics, Chemistry and Earth Sciences, University of Adelaide, Adelaide, South Australia, 5005, Australia
| | - Yingbo Zhao
- School of Physical Science and Technology, ShanghaiTech University, Shanghai, 201210, P. R. China
| | - Tao Li
- School of Physics, Chemistry and Earth Sciences, University of Adelaide, Adelaide, South Australia, 5005, Australia
| |
Collapse
|
6
|
Yu S, Li C, Zhao S, Chai M, Hou J, Lin R. Recent advances in the interfacial engineering of MOF-based mixed matrix membranes for gas separation. NANOSCALE 2024; 16:7716-7733. [PMID: 38536054 DOI: 10.1039/d4nr00096j] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 04/26/2024]
Abstract
The membrane process stands as a promising and transformative technology for efficient gas separation due to its high energy efficiency, operational simplicity, low environmental impact, and easy up-and-down scaling. Metal-organic framework (MOF)-polymer mixed matrix membranes (MMMs) combine MOFs' superior gas-separation performance with polymers' processing versatility, offering the opportunity to address the limitations of pure polymer or inorganic membranes for large-scale integration. However, the incompatibility between the rigid MOFs and flexible polymer chains poses a challenge in MOF MMM fabrication, which can cause issues such as MOF agglomeration, sedimentation, and interfacial defects, substantially weakening membrane separation efficiency and mechanical properties, particularly gas separation. This review focuses on engineering MMMs' interfaces, detailing recent strategies for reducing interfacial defects, improving MOF dispersion, and enhancing MOF loading. Advanced characterisation techniques for understanding membrane properties, specifically the MOF-polymer interface, are outlined. Lastly, it explores the remaining challenges in MMM research and outlines potential future research directions.
Collapse
Affiliation(s)
- Shuwen Yu
- School of Chemistry and Chemical Engineering, Suzhou University, Suzhou, 234000, China
- School of Chemical Engineering, The University of Queensland, St Lucia, QLD, 4072, Australia.
| | - Conger Li
- School of Chemical Engineering, The University of Queensland, St Lucia, QLD, 4072, Australia.
- School of Physical Science and Technology, Shanghai Tech University, Shanghai, 201210, China
| | - Shuke Zhao
- School of Chemical Engineering, The University of Queensland, St Lucia, QLD, 4072, Australia.
| | - Milton Chai
- School of Chemical Engineering, The University of Queensland, St Lucia, QLD, 4072, Australia.
| | - Jingwei Hou
- School of Chemical Engineering, The University of Queensland, St Lucia, QLD, 4072, Australia.
| | - Rijia Lin
- School of Chemical Engineering, The University of Queensland, St Lucia, QLD, 4072, Australia.
| |
Collapse
|
7
|
Choe JH, Kim H, Yun H, Kang M, Park S, Yu S, Hong CS. Boc Protection for Diamine-Appended MOF Adsorbents to Enhance CO 2 Recyclability under Realistic Humid Conditions. J Am Chem Soc 2024; 146:646-659. [PMID: 38151051 DOI: 10.1021/jacs.3c10475] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/29/2023]
Abstract
Among the various metal-organic framework (MOF) adsorbents, diamine-functionalized Mg2(dobpdc) (dobpdc4- = 4,4-dioxidobiphenyl-3,3'-dicarboxylate) shows remarkable carbon dioxide removal performance. However, applying diamine-functionalized Mg2(dobpdc) in practical applications is premature because it shows persistent performance degradation under real flue gas conditions containing water vapor owing to diamine loss during wet cycles. To address this issue, we employed hydrophobic carbonate compounds to protect diamine groups in een-Mg2(dobpdc) (een-MOF, een = N-ethylethylenediamine). tert-Butyl dicarbonate (Boc) reacted rapidly with diamines at the pore openings of MOF particles to form dense secondary and tertiary hydrophobic amines, effectively preventing moisture ingress. The Boc-protected een-MOF-Boc1 maintained excellent CO2 adsorption even under simulated flue gas conditions containing 10% H2O. This observation indicates that Boc protection renders een groups intact during repeated wet cycles, suggesting that Boc-protected een groups are resistant to replacement by water molecules. To increase the practicability of the MOF adsorbent, we fabricated een-MOF/PAN-Boc1 composite beads by shaping MOF particles with polyacrylonitrile (PAN). Notably, the composite beads maintained their CO2 adsorption performance even after repeating the temperature swing adsorption process more than 150 times in 10% water vapor. Furthermore, breakthrough tests showed that the dynamic CO2 separation performance was retained under humid conditions. These results demonstrate that Boc protection provides an easy and effective way to develop promising adsorbents with high CO2 adsorption capacity, long-term durability, and the properties required for postcombustion applications.
Collapse
Affiliation(s)
- Jong Hyeak Choe
- Department of Chemistry, Korea University, Seoul 02841, Republic of Korea
| | - Hyojin Kim
- Department of Chemistry, Korea University, Seoul 02841, Republic of Korea
| | - Hongryeol Yun
- Department of Chemistry, Korea University, Seoul 02841, Republic of Korea
| | - Minjung Kang
- Department of Chemistry, Korea University, Seoul 02841, Republic of Korea
| | - Sookyung Park
- Department of Chemistry, Korea University, Seoul 02841, Republic of Korea
| | - Sumin Yu
- Department of Chemistry, Korea University, Seoul 02841, Republic of Korea
| | - Chang Seop Hong
- Department of Chemistry, Korea University, Seoul 02841, Republic of Korea
| |
Collapse
|
8
|
Li S, Han WY, Wang ZX, Sun YJ, Zheng Z, Yin MJ, Liu S, An QF. Dormancy and double-activation strategy for construction of high-performance mixed-matrix membranes. Angew Chem Int Ed Engl 2024; 63:e202315167. [PMID: 37983657 DOI: 10.1002/anie.202315167] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/09/2023] [Revised: 11/16/2023] [Accepted: 11/20/2023] [Indexed: 11/22/2023]
Abstract
Mixed-matrix membranes (MMMs) have the potential for energy-efficient gas separation by matching the superior mass transfer and anti-plasticization properties of the fillers with processability and scaling up features of the polymers. However, construction of high-performance MMMs has been prohibited due to low filler-loading and the existence of interfacial defects. Here, high MOF-loaded, i.e., 55 wt %, MMMs are developed by a 'dormancy and double-activation' (DDA) strategy. High MOF precursor concentration suppresses crystallization in the membrane casting solution, realizing molecular level mixing of all components. Then, the polymeric matrix was formed with uniform encapsulation of MOF nutrients. Subsequently, double-activation was employed to induce MOF crystallization: the alkali promotes MOFs nucleation to harvest small porous nanocrystals while excessive ligands activate the metal ions to enhance the MOFs conversion. As such, quasi-semi-continuous mass transfer channels can be formed in the MMMs by the connected MOFs nanocrystals to boost the gas permeability. The optimized MMM shows significantly ameliorated CO2 permeability, i.e., 2841 Barrer, five-fold enhancement compared with pristine polymer membrane, with a good CO2 /N2 selectivity of 36. Besides, the nanosized MOFs intensify their interaction with polymer chains, endowing the MMMs with good anti-plasticization behaviour and stability, which advances practical application of MMMs in carbon capture.
Collapse
Affiliation(s)
- Shuo Li
- Beijing Key Laboratory for Green Catalysis and Separation, Department of Chemical Engineering, Beijing University of Technology, Beijing, 100124, China
| | - Wei-Yao Han
- Beijing Key Laboratory for Green Catalysis and Separation, Department of Chemical Engineering, Beijing University of Technology, Beijing, 100124, China
| | - Zhao-Xu Wang
- Beijing Key Laboratory for Green Catalysis and Separation, Department of Chemical Engineering, Beijing University of Technology, Beijing, 100124, China
| | - Yu-Jie Sun
- Beijing Key Laboratory for Green Catalysis and Separation, Department of Chemical Engineering, Beijing University of Technology, Beijing, 100124, China
| | - Zilong Zheng
- Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing, 100124, China
| | - Ming-Jie Yin
- Beijing Key Laboratory for Green Catalysis and Separation, Department of Chemical Engineering, Beijing University of Technology, Beijing, 100124, China
| | - Shaomin Liu
- WA School of Mines: Minerals, Energy and Chemical Engineering, Curtin University, Bentley, WA 6102, Australia
| | - Quan-Fu An
- Beijing Key Laboratory for Green Catalysis and Separation, Department of Chemical Engineering, Beijing University of Technology, Beijing, 100124, China
| |
Collapse
|
9
|
Lee TH, Lee BK, Yoo SY, Lee H, Wu WN, Smith ZP, Park HB. PolyMOF nanoparticles constructed from intrinsically microporous polymer ligand towards scalable composite membranes for CO 2 separation. Nat Commun 2023; 14:8330. [PMID: 38097615 PMCID: PMC10721836 DOI: 10.1038/s41467-023-44027-y] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/28/2023] [Accepted: 11/28/2023] [Indexed: 12/17/2023] Open
Abstract
Integrating different modification strategies into a single step to achieve the desired properties of metal-organic frameworks (MOFs) has been very synthetically challenging, especially in developing advanced MOF/polymer mixed matrix membranes (MMMs). Herein, we report a polymer-MOF (polyMOF) system constructed from a carboxylated polymer with intrinsic microporosity (cPIM-1) ligand. This intrinsically microporous ligand could coordinate with metals, leading to ~100 nm-sized polyMOF nanoparticles. Compared to control MOFs, these polyMOFs exhibit enhanced ultramicroporosity for efficient molecular sieving, and they have better dispersion properties in casting solutions to prepare MMMs. Ultimately, integrating coordination chemistries through the cPIM-1 and polymer-based functionality into porous materials results in polyMOF/PIM-1 MMMs that display excellent CO2 separation performance (surpassing the CO2/N2 and CO2/CH4 upper bounds). In addition to exploring the physicochemical and transport properties of this polyMOF system, scalability has been demonstrated by converting the developed MMM material into large-area (400 cm2) thin-film nanocomposite (TFN) membranes.
Collapse
Affiliation(s)
- Tae Hoon Lee
- Department of Energy Engineering, Hanyang University, Seoul, 04763, Republic of Korea
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA, 02139, USA
| | - Byung Kwan Lee
- Department of Energy Engineering, Hanyang University, Seoul, 04763, Republic of Korea
| | - Seung Yeon Yoo
- Department of Energy Engineering, Hanyang University, Seoul, 04763, Republic of Korea
| | - Hyunhee Lee
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA, 02139, USA
| | - Wan-Ni Wu
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA, 02139, USA
| | - Zachary P Smith
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA, 02139, USA
| | - Ho Bum Park
- Department of Energy Engineering, Hanyang University, Seoul, 04763, Republic of Korea.
| |
Collapse
|
10
|
Liu Y, Xue B, Chen J, Lai Y, Yin P. The Coordination Nanocages-Integrated Polymer Brush Networks for Flexible Microporous Membranes with Exceptional H 2 /CO 2 Separation Performance. Macromol Rapid Commun 2023; 44:e2300477. [PMID: 37814593 DOI: 10.1002/marc.202300477] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/08/2023] [Revised: 10/07/2023] [Indexed: 10/11/2023]
Abstract
The emergence of polymers with intrinsic microporosity provides solutions for flexible gas separation membranes with both high gas permeability and selectivity. However, their applications are significantly hindered by the costly synthetic efforts, limited availability of chemical systems, and narrow window of microporosity sizes. Herein, flexible mixed matrix membranes with tunable intrinsic microporosity can be facilely fabricated from the coordination assembly of polymer brushes and coordination nanocages. Polymer brushes bearing isophthalic acid side groups can coordinate with Cu2+ to assemble into polymer networks crosslinked by 2 nm nanocages. The semi-flexible feature of the polymer brush and the high crosslinking density of the network prevent the network from collapsing during solvent removal and the obtained aerogels demonstrate hierarchical structure with dual porosity from the crosslinked polymer network and coordination nanocage, respectively. The porosity can be facilely tuned via the amount of Cu2+ by regulating the network crosslinking density and nanocage loadings, and finally, optimized gas separation that surpasses Robeson upper bound for H2 /CO2 can be achieved. The coordination-driven assembly protocol paves a new avenue for the cost-effective synthesis of polymers with intrinsic microporosity and the fabrication of flexible gas separation membranes.
Collapse
Affiliation(s)
- Yuan Liu
- State Key Laboratory of Luminescent Materials and Devices & South China Advanced Institute for Soft Matter Science and Technology, South China University of Technology, Guangzhou, 510640, P. R. China
| | - Binghui Xue
- State Key Laboratory of Luminescent Materials and Devices & South China Advanced Institute for Soft Matter Science and Technology, South China University of Technology, Guangzhou, 510640, P. R. China
| | - Jiadong Chen
- State Key Laboratory of Luminescent Materials and Devices & South China Advanced Institute for Soft Matter Science and Technology, South China University of Technology, Guangzhou, 510640, P. R. China
| | - Yuyan Lai
- State Key Laboratory of Luminescent Materials and Devices & South China Advanced Institute for Soft Matter Science and Technology, South China University of Technology, Guangzhou, 510640, P. R. China
| | - Panchao Yin
- State Key Laboratory of Luminescent Materials and Devices & South China Advanced Institute for Soft Matter Science and Technology, South China University of Technology, Guangzhou, 510640, P. R. China
| |
Collapse
|
11
|
Dassouki K, Dasgupta S, Dumas E, Steunou N. Interfacing metal organic frameworks with polymers or carbon-based materials: from simple to hierarchical porous and nanostructured composites. Chem Sci 2023; 14:12898-12925. [PMID: 38023506 PMCID: PMC10664523 DOI: 10.1039/d3sc03659f] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/17/2023] [Accepted: 10/17/2023] [Indexed: 12/01/2023] Open
Abstract
In the past few years, metal organic frameworks (MOFs) have been assembled with (bio)polymers and a series of carbon-based materials (graphene, graphene oxide, carbon nanotubes, carbon quantum dots, etc.) leading to a wide range of composites differing in their chemical composition, pore structure and functionality. The objective was mainly to overcome the limitations of MOFs in terms of mechanical properties, chemical stability and processability while imparting novel functionality (electron conductivity, (photo)catalytic activity, etc.) and hierarchical porosity. These composites were considered for numerous applications including gas/liquid adsorption and separation, (photo)catalysis, biomedicine, energy storage, conversion and so on. The performance of such composites depends strongly on their microstructural and physico-chemical properties which are mainly driven by the chemical strategies used to design and process such composites. In this perspective article, we propose to cover this topic and provide a useful survey of recent progress in the synthesis and design of MOFs-carbon material composites. This article will describe the development of composites with increasing complexity in terms of porous architecture, spatial structuration and organisation, and functionality.
Collapse
Affiliation(s)
- Khaled Dassouki
- Institut Lavoisier de Versailles, UMR CNRS 8180, Université de Versailles St Quentin en Yvelines, Université Paris Saclay Versailles France
| | - Sanchari Dasgupta
- Institut Lavoisier de Versailles, UMR CNRS 8180, Université de Versailles St Quentin en Yvelines, Université Paris Saclay Versailles France
| | - Eddy Dumas
- Institut Lavoisier de Versailles, UMR CNRS 8180, Université de Versailles St Quentin en Yvelines, Université Paris Saclay Versailles France
| | - Nathalie Steunou
- Institut Lavoisier de Versailles, UMR CNRS 8180, Université de Versailles St Quentin en Yvelines, Université Paris Saclay Versailles France
| |
Collapse
|
12
|
Hu X, Tian W, Jiao Y, Kelley SP, Wang P, Dalgarno SJ, Atwood DA, Feng S, Atwood JL. Redox-Controlled Self-Assembly of Vanadium-Seamed Hexameric Pyrogallol[4]Arene Nanocapsules. J Am Chem Soc 2023; 145:20375-20380. [PMID: 37672654 DOI: 10.1021/jacs.3c05448] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 09/08/2023]
Abstract
Here we report the controlled self-assembly of vanadium-seamed metal-organic nanocapsules with specific metal oxidation state distributions. Three supramolecular assemblies composed of the same numbers of components including 24 metal centers and six pyrogallol[4]arene ligands were constructed: a VIII24L6 capsule, a mixed-valence VIII18VIV6L6 capsule, and a VIV24L6 capsule. Crystallographic studies of the new capsules reveal their remarkable structural complexity and geometries, while marked differences in metal oxidation state distribution greatly affect the photoelectric conversion properties of these assemblies. This work therefore represents a significant step forward in the construction of intricate metal-organic architectures with tailored structure and functionality.
Collapse
Affiliation(s)
- Xiangquan Hu
- Department of Chemistry, University of Missouri-Columbia, Columbia, Missouri 65211, United States
| | - Wenjuan Tian
- Key Laboratory of Chemical Biology, Molecular Engineering of Ministry of Education, Institute of Molecular Science, Shanxi University, Taiyuan 030006, China
| | - Yuan Jiao
- Key Laboratory of Chemical Biology, Molecular Engineering of Ministry of Education, Institute of Molecular Science, Shanxi University, Taiyuan 030006, China
| | - Steven P Kelley
- Department of Chemistry, University of Missouri-Columbia, Columbia, Missouri 65211, United States
| | - Ping Wang
- School of Chemical Sciences, University of Illinois at Urbana-Champaign, Urbana, Illinois 61801, United States
| | - Scott J Dalgarno
- Institute of Chemical Sciences, Heriot-Watt University, Riccarton, Edinburgh EH14 4AS, United Kingdom
| | - David A Atwood
- Department of Chemistry, University of Kentucky, Lexington, Kentucky 40506, United States
| | - Sisi Feng
- Key Laboratory of Chemical Biology, Molecular Engineering of Ministry of Education, Institute of Molecular Science, Shanxi University, Taiyuan 030006, China
- Institute of Carbon-Based Thin Film Electronics, Peking University, Shanxi, Taiyuan 030012, China
| | - Jerry L Atwood
- Department of Chemistry, University of Missouri-Columbia, Columbia, Missouri 65211, United States
| |
Collapse
|
13
|
Zhang D, Wang Y, Bi L, Liu H, Ding X. SOD mineralized zeolitic imidazole framework-8 for the treatment of chemotherapy-related acute kidney injury. Colloids Surf B Biointerfaces 2023; 229:113447. [PMID: 37536166 DOI: 10.1016/j.colsurfb.2023.113447] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/30/2023] [Revised: 06/23/2023] [Accepted: 07/07/2023] [Indexed: 08/05/2023]
Abstract
Acute kidney injury (AKI), a prevalent and fatal adverse event, seriously affects cancer patients undergoing chemotherapy. The most important pathological mechanism of AKI is oxidative stress from reactive oxygen species (ROS). Currently, ROS scavenging is a promising strategy to manage the risk of chemotherapy-induced AKI. Herein, we successfully synthesized SOD@ZIF-8 nanoparticles by biomimetic mineralization, which were taken up by cells and could improve cell viability by limiting oxidative stress damage, as found in in vitro studies. Moreover, SOD@ZIF-8 nanoparticles exhibit broad-spectrum antioxidant properties in addition to significant renal accumulation in AKI mice, preventing clinically related cisplatin-induced AKI in murine models. AKI alleviation in the model was validated by measuring blood serum, staining kidney tissue, and related biomarkers. SOD@ZIF-8 nanoparticle therapeutic efficiency exceeds NAC, a small molecular antioxidant functioning through free radical scavenging. The results suggest SOD@ZIF-8 nanoparticles as a potential therapeutic option for AKI and other ROS-related disorders.
Collapse
Affiliation(s)
- Daofu Zhang
- Department of Urology, First Hospital of Jilin University, Changchun, PR China; Department of Radiology, First Hospital of Jilin University, Changchun, PR China
| | - Yanbo Wang
- Department of Radiology, First Hospital of Jilin University, Changchun, PR China.
| | - Luopeng Bi
- Department of Radiology, First Hospital of Jilin University, Changchun, PR China
| | - Hongcheng Liu
- Department of Radiology, First Hospital of Jilin University, Changchun, PR China
| | - Xiaobo Ding
- Department of Urology, First Hospital of Jilin University, Changchun, PR China.
| |
Collapse
|
14
|
Liang Y, Yang X, Wang X, Guan ZJ, Xing H, Fang Y. A cage-on-MOF strategy to coordinatively functionalize mesoporous MOFs for manipulating selectivity in adsorption and catalysis. Nat Commun 2023; 14:5223. [PMID: 37634039 PMCID: PMC10460432 DOI: 10.1038/s41467-023-40973-9] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/31/2022] [Accepted: 08/15/2023] [Indexed: 08/28/2023] Open
Abstract
Functionalizing porous materials with capping agents generates hybrid materials with enhanced properties, while the challenge is how to improve the selectivity and maintain the porosity of the parent framework. Herein, we developed a "Cage-on-MOF" strategy to tune the recognition and catalytic properties of MOFs without impairing their porosity. Two types of porous coordination cages (PCCs) of opposite charges containing secondary binding groups were developed to coordinatively functionalize two distinct porous MOFs, namely MOF@PCC nanocomposites. We demonstrated that the surface-capped PCCs can act as "modulators" to effectively tune the surface charge, stability, and adsorption behavior of different host MOF particles. More importantly, the MOF@PCCs can serve as selective heterogeneous catalysts for condensation reactions to achieve reversed product selectivity and excellent recyclability. This work sets the foundation for using molecular cages as porous surface-capping agents to functionalize and manipulate another porous material, without affecting the intrinsic properties of the parent framework.
Collapse
Affiliation(s)
- Yu Liang
- State Key Laboratory of Chemo/Bio-Sensing and Chemometrics, College of Chemistry and Chemical Engineering, Hunan University, Changsha, 410082, Hunan, China
- Innovation Institute of Industrial Design and Machine Intelligence Quanzhou-Hunan University, Quanzhou, 362801, Fujian, China
| | - Xiaoxin Yang
- State Key Laboratory of Chemo/Bio-Sensing and Chemometrics, College of Chemistry and Chemical Engineering, Hunan University, Changsha, 410082, Hunan, China
- Institute of Chemical Biology and Nanomedicine, Hunan University, Changsha, 410082, Hunan, China
| | - Xiaoyu Wang
- Kuang Yaming Honors School, Nanjing University, Nanjing, 210023, China
| | - Zong-Jie Guan
- State Key Laboratory of Chemo/Bio-Sensing and Chemometrics, College of Chemistry and Chemical Engineering, Hunan University, Changsha, 410082, Hunan, China
- Innovation Institute of Industrial Design and Machine Intelligence Quanzhou-Hunan University, Quanzhou, 362801, Fujian, China
| | - Hang Xing
- State Key Laboratory of Chemo/Bio-Sensing and Chemometrics, College of Chemistry and Chemical Engineering, Hunan University, Changsha, 410082, Hunan, China.
- Institute of Chemical Biology and Nanomedicine, Hunan University, Changsha, 410082, Hunan, China.
| | - Yu Fang
- State Key Laboratory of Chemo/Bio-Sensing and Chemometrics, College of Chemistry and Chemical Engineering, Hunan University, Changsha, 410082, Hunan, China.
- Innovation Institute of Industrial Design and Machine Intelligence Quanzhou-Hunan University, Quanzhou, 362801, Fujian, China.
| |
Collapse
|
15
|
Yang X, Zhang Q, Liu Y, Nian M, Xie M, Xie S, Yang Q, Wang S, Wei H, Duan J, Dong S, Xing H. Metal-Organic Framework Nanoparticles with Universal Dispersibility through Crown Ether Surface Coordination for Phase-Transfer Catalysis and Separation Membranes. Angew Chem Int Ed Engl 2023; 62:e202303280. [PMID: 37040089 DOI: 10.1002/anie.202303280] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/05/2023] [Revised: 04/09/2023] [Accepted: 04/11/2023] [Indexed: 04/12/2023]
Abstract
Dispersing metal-organic framework (MOF) solids in stable colloids is crucial for their availability and processibility. Herein, we report a crown ether surface coordination approach for functionalizing the surface-exposed metal sites of MOF particles with amphiphilic carboxylated crown ether (CEC ). The surface-bound crown ethers significantly improve MOF solvation without compromising the accessible voids. We demonstrate that CEC -coated MOFs exhibit exceptional colloidal dispersibility and stability in 11 distinct solvents and six polymer matrices with a wide range of polarities. The MOF-CEC can be instantaneously suspended in immiscible two-phase solvents as an effective phase-transfer catalyst and can form various uniform membranes with enhanced adsorption and separation performance, which highlights the effectiveness of crown ether coating.
Collapse
Affiliation(s)
- Xiaoxin Yang
- Institute of Chemical Biology and Nanomedicine, State Key Laboratory of Chemo/Biosensing and Chemometrics, Hunan Provincial Key Laboratory of Biomacromolecular Chemical Biology, College of Chemistry and Chemical Engineering, Hunan University, Changsha, 410082, China
| | - Qiao Zhang
- Institute of Chemical Biology and Nanomedicine, State Key Laboratory of Chemo/Biosensing and Chemometrics, Hunan Provincial Key Laboratory of Biomacromolecular Chemical Biology, College of Chemistry and Chemical Engineering, Hunan University, Changsha, 410082, China
| | - Yufeng Liu
- College of Engineering and Applied Sciences, State Key Laboratory of Analytical Chemistry for Life Science, Nanjing University, Nanjing, Jiangsu, 210023, China
| | - Mengjie Nian
- State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Nanjing Tech University, Nanjing, 211816, China
| | - Min Xie
- Institute of Chemical Biology and Nanomedicine, State Key Laboratory of Chemo/Biosensing and Chemometrics, Hunan Provincial Key Laboratory of Biomacromolecular Chemical Biology, College of Chemistry and Chemical Engineering, Hunan University, Changsha, 410082, China
| | - Shasha Xie
- Institute of Chemical Biology and Nanomedicine, State Key Laboratory of Chemo/Biosensing and Chemometrics, Hunan Provincial Key Laboratory of Biomacromolecular Chemical Biology, College of Chemistry and Chemical Engineering, Hunan University, Changsha, 410082, China
| | - Qinglian Yang
- Institute of Chemical Biology and Nanomedicine, State Key Laboratory of Chemo/Biosensing and Chemometrics, Hunan Provincial Key Laboratory of Biomacromolecular Chemical Biology, College of Chemistry and Chemical Engineering, Hunan University, Changsha, 410082, China
| | - Suna Wang
- Shandong Provincial Key Laboratory of Chemical Energy Storage and Novel Cell Technology, School of Chemistry and Chemical Engineering, Liaocheng University, Liaocheng, 252059, China
| | - Hui Wei
- College of Engineering and Applied Sciences, State Key Laboratory of Analytical Chemistry for Life Science, Nanjing University, Nanjing, Jiangsu, 210023, China
| | - Jingui Duan
- State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Nanjing Tech University, Nanjing, 211816, China
| | - Shengyi Dong
- Institute of Chemical Biology and Nanomedicine, State Key Laboratory of Chemo/Biosensing and Chemometrics, Hunan Provincial Key Laboratory of Biomacromolecular Chemical Biology, College of Chemistry and Chemical Engineering, Hunan University, Changsha, 410082, China
| | - Hang Xing
- Institute of Chemical Biology and Nanomedicine, State Key Laboratory of Chemo/Biosensing and Chemometrics, Hunan Provincial Key Laboratory of Biomacromolecular Chemical Biology, College of Chemistry and Chemical Engineering, Hunan University, Changsha, 410082, China
| |
Collapse
|
16
|
Zhang P, Liu Y, Feng G, Li C, Zhou J, Du C, Bai Y, Hu S, Huang T, Wang G, Quan P, Hirvonen J, Fan J, Santos HA, Liu D. Controlled Interfacial Polymer Self-Assembly Coordinates Ultrahigh Drug Loading and Zero-Order Release in Particles Prepared under Continuous Flow. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2211254. [PMID: 36802103 DOI: 10.1002/adma.202211254] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/02/2022] [Revised: 02/11/2023] [Indexed: 06/02/2023]
Abstract
Microparticles are successfully engineered through controlled interfacial self-assembly of polymers to harmonize ultrahigh drug loading with zero-order release of protein payloads. To address their poor miscibility with carrier materials, protein molecules are transformed into nanoparticles, whose surfaces are covered with polymer molecules. This polymer layer hinders the transfer of cargo nanoparticles from oil to water, achieving superior encapsulation efficiency (up to 99.9%). To control payload release, the polymer density at the oil-water interface is enhanced, forming a compact shell for microparticles. The resultant microparticles can harvest up to 49.9% mass fraction of proteins with zero-order release kinetics in vivo, enabling an efficient glycemic control in type 1 diabetes. Moreover, the precise control of engineering process offered through continuous flow results in high batch-to-batch reproducibility and, ultimately, excellent scale-up feasibility.
Collapse
Affiliation(s)
- Pei Zhang
- State Key Laboratory of Natural Medicines, Department of Pharmaceutical Science, NMPA Key Laboratory for Research and Evaluation of Pharmaceutical Preparations and Excipients, China Pharmaceutical University, Nanjing, 210009, China
- Drug Research Program, Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki, Helsinki, 00014, Finland
| | - Yingxin Liu
- State Key Laboratory of Natural Medicines, Department of Pharmaceutical Science, NMPA Key Laboratory for Research and Evaluation of Pharmaceutical Preparations and Excipients, China Pharmaceutical University, Nanjing, 210009, China
| | - Guobing Feng
- State Key Laboratory of Natural Medicines, Department of Pharmaceutical Science, NMPA Key Laboratory for Research and Evaluation of Pharmaceutical Preparations and Excipients, China Pharmaceutical University, Nanjing, 210009, China
| | - Cong Li
- Department of Orthopedics, The First Affiliated Hospital of Nanjing Medical University, Nanjing, 210029, China
| | - Jun Zhou
- State Key Laboratory of Natural Medicines, Department of Pharmaceutical Science, NMPA Key Laboratory for Research and Evaluation of Pharmaceutical Preparations and Excipients, China Pharmaceutical University, Nanjing, 210009, China
| | - Chunyang Du
- State Key Laboratory of Natural Medicines, Department of Pharmaceutical Science, NMPA Key Laboratory for Research and Evaluation of Pharmaceutical Preparations and Excipients, China Pharmaceutical University, Nanjing, 210009, China
| | - Yuancheng Bai
- State Key Laboratory of Natural Medicines, Department of Pharmaceutical Science, NMPA Key Laboratory for Research and Evaluation of Pharmaceutical Preparations and Excipients, China Pharmaceutical University, Nanjing, 210009, China
| | - Shuai Hu
- State Key Laboratory of Natural Medicines, Department of Pharmaceutical Science, NMPA Key Laboratory for Research and Evaluation of Pharmaceutical Preparations and Excipients, China Pharmaceutical University, Nanjing, 210009, China
| | - Tianhe Huang
- State Key Laboratory of Natural Medicines, Department of Pharmaceutical Science, NMPA Key Laboratory for Research and Evaluation of Pharmaceutical Preparations and Excipients, China Pharmaceutical University, Nanjing, 210009, China
| | - Guan Wang
- State Key Laboratory of Natural Medicines, Department of Pharmaceutical Science, NMPA Key Laboratory for Research and Evaluation of Pharmaceutical Preparations and Excipients, China Pharmaceutical University, Nanjing, 210009, China
| | - Peng Quan
- Department of Pharmaceutical Science, School of Pharmacy, Shenyang Pharmaceutical University, Shenyang, 110016, China
| | - Jouni Hirvonen
- Drug Research Program, Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki, Helsinki, 00014, Finland
| | - Jin Fan
- Department of Orthopedics, The First Affiliated Hospital of Nanjing Medical University, Nanjing, 210029, China
| | - Hélder A Santos
- Drug Research Program, Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki, Helsinki, 00014, Finland
- Department of Biomedical Engineering, University Medical Center Groningen, University of Groningen, Ant. Deusinglaan 1, Groningen, 9713 AV, The Netherlands
- W.J. Kolff Institute for Biomedical Engineering and Materials Science, University Medical Center Groningen, University of Groningen, Ant. Deusinglaan 1, Groningen, 9713 AV, The Netherlands
| | - Dongfei Liu
- State Key Laboratory of Natural Medicines, Department of Pharmaceutical Science, NMPA Key Laboratory for Research and Evaluation of Pharmaceutical Preparations and Excipients, China Pharmaceutical University, Nanjing, 210009, China
- Drug Research Program, Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki, Helsinki, 00014, Finland
- Chongqing Innovation Institute of China Pharmaceutical University, Chongqing, 401135, China
| |
Collapse
|
17
|
Bioinspired inhibition of aggregation in metal-organic frameworks (MOFs). iScience 2023; 26:106239. [PMID: 36915688 PMCID: PMC10006690 DOI: 10.1016/j.isci.2023.106239] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/28/2022] [Revised: 01/30/2023] [Accepted: 02/15/2023] [Indexed: 02/19/2023] Open
Abstract
Different from traditional procedures of using solid stabilizers like polymers and surfactants, here we demonstrate that water, as a very "soft" matter, could function as a "spacer" to prevent the aggregation of metal-organic frameworks (MOFs) in aqueous dispersions. Our theoretical calculations reveal in case of an excess of positively charged metal nodes of MOFs, where water molecules are ligated to metal nodes that greatly enhance MOFs' solution dispersibility through electrostatic stabilization. This discovery has motivated us to develop a facile experimental approach for producing a category of "clean" MOF dispersions without foreign additives. Potential application has been demonstrated for the size fractionation of MOFs, which results in small-size MOFs (50-80 nm) characteristic of superior electrocatalytic oxygen evolution activities (256 mV at 10 mA cm-2, Tafel slope of 49 mV dec-1 and durability >30 h). This work would provide new clues for aqueous processing of MOFs for many emerging applications.
Collapse
|
18
|
Wang D, Li T. Toward MOF@Polymer Core-Shell Particles: Design Principles and Potential Applications. Acc Chem Res 2023; 56:462-474. [PMID: 36745822 DOI: 10.1021/acs.accounts.2c00695] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/08/2023]
Abstract
ConspectusCompositing MOFs with polymers brings out the best properties of both worlds. The solubility and excellent mechanical properties of polymers endow the brittle, powdery MOFs with enhanced processability, thereby enriching their functions as solid sorbents, filters, membranes, catalysts, drug delivery vehicles, and so forth. While most MOF-polymer composites are random mixtures of two materials with little control over their fine structures, MOF@polymer core-shell particles have recently emerged as a new platform for precise composite design. The well-defined polymer coating can keep the rich pore characteristics of the MOF intact while furnishing the MOF with new properties such as improved dispersibility in various media, tunable surface energy, enhanced chemical stability, and regulated guest diffusion. Nevertheless, the structural and chemical complexity of MOFs poses a grand challenge to the development of a generalizable and feasible strategy for constructing MOF@polymer. Examples in the literature that showcase the presence of a well-defined polymer shell on the MOF with fully reserved porosity are rare. Moreover, methods for coating MOFs with condensation polymers (e.g., polyimide, polysulfone) are severely underexplored, despite their clear potential as membrane materials. In this Account, we present our group's effort over the past 4 years on the synthesis and applications of MOF@polymer composites. We first described a highly generalizable surface polymerization method that utilizes the rapid physisorption of a random copolymer (RCP) to carry initiating groups to the MOF surfaces. Subsequent controlled radical polymerization led to the formation of a uniform methacrylate or styrenic polymer on the MOF with tunable thickness and composition. To utilize the properties of condensation polymers, we pioneered the covalent grafting of polyimide (PI) brushes to UiO-66-NH2 surfaces. In addition, to circumvent the need for a covalent anchoring group, we further developed an MOF surface grafting method based on mechanical linkage. Instead of connecting to the ligand, polyimide (PI) oligomer was linked to a functionalized linear polymer physically entangled within an MOF, thus realizing surface grafting with PI. Alternatively, PIs, polysulfone (PSF), and polycarbonate (PC) can also be grafted to various MOF surfaces through a metal-organic nanocapsule (MONC)-mediated method using a combination of electrostatic interaction and coordination bonds. To find a rapid and low-cost surface coating method suitable for commercialization, a new approach called non-solvent-induced surface-aimed deposition (NISAP) was developed. The action of the solvent phase separation drives dianhydrides and polyamines to the MOF surface, thus realizing accelerated polymerization and the rapid formation of a polymer coating on the MOF. Finally, we provided an overview of the unique properties and potential applications of MOF@polymer composites, including improved stability, MMMs, porous liquids (PLs), and immobilizing homogeneous catalysts. We hope that this Account can inspire more researchers to further develop and optimize the synthetic strategies for MOF@polymer and uncover its full application potential.
Collapse
Affiliation(s)
- Dongxu Wang
- School of Physical Science and Technology, ShanghaiTech University, 393 Middle Huaxia Road, Shanghai, China 201210
| | - Tao Li
- School of Physical Science and Technology, ShanghaiTech University, 393 Middle Huaxia Road, Shanghai, China 201210
| |
Collapse
|
19
|
Mai T, Li DD, Chen L, Ma MG. Collaboration of two-star nanomaterials: The applications of nanocellulose-based metal organic frameworks composites. Carbohydr Polym 2023; 302:120359. [PMID: 36604046 DOI: 10.1016/j.carbpol.2022.120359] [Citation(s) in RCA: 10] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/18/2022] [Revised: 11/11/2022] [Accepted: 11/13/2022] [Indexed: 11/18/2022]
Abstract
Nanocellulose, as the star nanomaterial in carbohydrate polymers, has excellent mechanical properties, biodegradability, and easy chemical modification. However, further practical applications of nanocellulose are limited by their inadequate functionalization. Metal-organic frameworks (MOFs), as the star nanomaterial in functional polymers, have a large surface area, high porosity, and adjustable structure. The collaboration of nanocellulose and MOFs is a desirable strategy to make composites especially interesting for multifunctional and multi-field applications. What sparks will be produced by the collaboration of two-star nanomaterials? In this review article, we highlight an up-to-date overview of nanocellulose-based MOFs composites. The sewage treatment, gas separation, energy storage, and biomedical applications are mainly summarized. Finally, the challenges and research trends of nanocellulose-based MOFs composites are prospected. We hope this review may provide a valuable reference for the development and applications of carbohydrate polymer composites soon.
Collapse
Affiliation(s)
- Tian Mai
- Research Center of Biomass Clean Utilization, MOE Engineering Research Center of Forestry Biomass Materials and Bioenergy, Beijing Key Laboratory of Lignocellulosic Chemistry, College of Materials Science and Technology, Beijing Forestry University, Beijing 100083, PR China
| | - Dan-Dan Li
- Research Center of Biomass Clean Utilization, MOE Engineering Research Center of Forestry Biomass Materials and Bioenergy, Beijing Key Laboratory of Lignocellulosic Chemistry, College of Materials Science and Technology, Beijing Forestry University, Beijing 100083, PR China
| | - Lei Chen
- Research Center of Biomass Clean Utilization, MOE Engineering Research Center of Forestry Biomass Materials and Bioenergy, Beijing Key Laboratory of Lignocellulosic Chemistry, College of Materials Science and Technology, Beijing Forestry University, Beijing 100083, PR China
| | - Ming-Guo Ma
- Research Center of Biomass Clean Utilization, MOE Engineering Research Center of Forestry Biomass Materials and Bioenergy, Beijing Key Laboratory of Lignocellulosic Chemistry, College of Materials Science and Technology, Beijing Forestry University, Beijing 100083, PR China.
| |
Collapse
|
20
|
Li C, Jiang Y, Wu Z, Zhang Y, Huang C, Cheng S, You Y, Zhang P, Chen W, Mao L, Jiang L. Mixed Matrix Membrane with Penetrating Subnanochannels: A Versatile Nanofluidic Platform for Selective Metal Ion Conduction. Angew Chem Int Ed Engl 2023; 62:e202215906. [PMID: 36374215 DOI: 10.1002/anie.202215906] [Citation(s) in RCA: 8] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/28/2022] [Indexed: 11/16/2022]
Abstract
Biological ion channels penetrated through cell membrane form unique transport pathways for selective ionic conductance. Replicating the success of ion selectivity with mixed matrix membranes (MMMs) will enable new separation technologies but remains challenging. Herein, we report a soft substrate-assisted solution casting method to develop MMMs with penetrating subnanochannels for selective metal ion conduction. The MMMs are composed of penetrating Prussian white (PW) microcubes with subnanochannels in dense polyimide (PI) matrices, achieving selective monovalent metal ion conduction. The ion selectivity of K+ /Mg2+ is up to 14.0, and the ion conductance of K+ can reach 45.5 μS with the testing diameter of 5 mm, which can be further improved by increasing the testing area. Given the diversity of nanoporous materials and polymer matrices, we expect that the MMMs with penetrating subnanochannels could be developed into a versatile nanofluidic platform for various emerging applications.
Collapse
Affiliation(s)
- Chen Li
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, School of Materials Science and Engineering, Wuhan University of Technology, Wuhan, 430070, P. R. China
| | - Yanan Jiang
- College of Chemistry, Beijing Normal University, Beijing, 100875, P. R. China
| | - Zihan Wu
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, School of Materials Science and Engineering, Wuhan University of Technology, Wuhan, 430070, P. R. China
| | - Youcai Zhang
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, School of Materials Science and Engineering, Wuhan University of Technology, Wuhan, 430070, P. R. China
| | - Cheng Huang
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, School of Materials Science and Engineering, Wuhan University of Technology, Wuhan, 430070, P. R. China
| | - Sha Cheng
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, School of Materials Science and Engineering, Wuhan University of Technology, Wuhan, 430070, P. R. China
| | - Ya You
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, School of Materials Science and Engineering, Wuhan University of Technology, Wuhan, 430070, P. R. China.,Sanya Science and Education Innovation Park, Wuhan University of Technology, Sanya, 572024, P. R. China.,Hubei Longzhong Laboratory, Xiangyang, 441000, P. R. China
| | - Pengchao Zhang
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, School of Materials Science and Engineering, Wuhan University of Technology, Wuhan, 430070, P. R. China.,Sanya Science and Education Innovation Park, Wuhan University of Technology, Sanya, 572024, P. R. China.,Hubei Longzhong Laboratory, Xiangyang, 441000, P. R. China
| | - Wen Chen
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, School of Materials Science and Engineering, Wuhan University of Technology, Wuhan, 430070, P. R. China
| | - Lanqun Mao
- College of Chemistry, Beijing Normal University, Beijing, 100875, P. R. China
| | - Lei Jiang
- CAS Key Laboratory of Bio-inspired Materials and Interfacial Science, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, 100190, P. R. China
| |
Collapse
|
21
|
Lee TH, Lee BK, Youn C, Kang JH, Kim YJ, Kim KI, Ha YR, Han Y, Park HB. Interface engineering in MOF/crosslinked polyimide mixed matrix membranes for enhanced propylene/propane separation performance and plasticization resistance. J Memb Sci 2022. [DOI: 10.1016/j.memsci.2022.121182] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/13/2022]
|
22
|
Yang Z, Ying Y, Pu Y, Wang D, Yang H, Zhao D. Poly(ionic liquid)-Functionalized UiO-66-(OH) 2: Improved Interfacial Compatibility and Separation Ability in Mixed Matrix Membranes for CO 2 Separation. Ind Eng Chem Res 2022. [DOI: 10.1021/acs.iecr.1c04648] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/19/2022]
Affiliation(s)
- Ziqi Yang
- Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore 117585, Singapore
| | - Yunpan Ying
- Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore 117585, Singapore
| | - Yunchuan Pu
- Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore 117585, Singapore
- Joint School of National University of Singapore and Tianjin University, International Campus of Tianjin University, Binhai New City, Fuzhou 350207, China
| | - Dechao Wang
- Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore 117585, Singapore
- School of Chemistry and Chemical Engineering, Northwestern Polytechnical University, Xi’an 710129, China
| | - Hao Yang
- Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore 117585, Singapore
| | - Dan Zhao
- Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore 117585, Singapore
| |
Collapse
|
23
|
Budd PM, Foster AB. Seeking synergy in membranes: blends and mixtures with polymers of intrinsic microporosity. Curr Opin Chem Eng 2022. [DOI: 10.1016/j.coche.2022.100792] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/03/2023]
|
24
|
He S, Zhu B, Li S, Zhang Y, Jiang X, Hon Lau C, Shao L. Recent progress in PIM-1 based membranes for sustainable CO2 separations: Polymer structure manipulation and mixed matrix membrane design. Sep Purif Technol 2022. [DOI: 10.1016/j.seppur.2021.120277] [Citation(s) in RCA: 24] [Impact Index Per Article: 12.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/26/2022]
|
25
|
Zhao M, Ban Y, Yang K, Zhou Y, Cao N, Wang Y, Yang W. A Highly Selective Supramolecule Array Membrane Made of Zero-Dimensional Molecules for Gas Separation. Angew Chem Int Ed Engl 2021; 60:20977-20983. [PMID: 34269507 PMCID: PMC8519095 DOI: 10.1002/anie.202108185] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/20/2021] [Indexed: 11/21/2022]
Abstract
We orderly assembled zero-dimensional 2-methylimidazole (mim) molecules into unprecedented supramolecule array membranes (SAMs) through solvent-free vapor processing, realizing the intermolecular spacing of mim at ca. 0.30 nm available as size-sieving channels for distinguishing the tiny difference between H2 (kinetic diameter: 0.289 nm) and CO2 (kinetic diameter: 0.33 nm). The highly oriented and dense membranes yield a separation factor above 3600 for equimolar H2 /CO2 mixtures, which is one order of magnitude higher than those of the state-of-the-art membranes defining 2017's upper bound for H2 /CO2 separation. These SAMs define a new benchmark for molecular sieve membranes and are of paramount importance to precombustion carbon capture. Given the range of supramolecules, we anticipate SAMs with variable intermolecular channels could be applied in diversified separations that are prevalent in chemical processes.
Collapse
Affiliation(s)
- Meng Zhao
- State Key Laboratory of CatalysisDalian Institute of Chemical PhysicsChinese Academy of Sciences457 Zhongshan RoadDalian116023P. R. China
- University of Chinese Academy of Sciences19A Yuquan RoadBeijing100049P. R. China
| | - Yujie Ban
- State Key Laboratory of CatalysisDalian Institute of Chemical PhysicsChinese Academy of Sciences457 Zhongshan RoadDalian116023P. R. China
- University of Chinese Academy of Sciences19A Yuquan RoadBeijing100049P. R. China
- Dalian National Laboratory for Clean Energy457 Zhongshan RoadDalian116023P. R. China
| | - Kun Yang
- State Key Laboratory of CatalysisDalian Institute of Chemical PhysicsChinese Academy of Sciences457 Zhongshan RoadDalian116023P. R. China
- University of Chinese Academy of Sciences19A Yuquan RoadBeijing100049P. R. China
| | - Yingwu Zhou
- State Key Laboratory of CatalysisDalian Institute of Chemical PhysicsChinese Academy of Sciences457 Zhongshan RoadDalian116023P. R. China
- University of Chinese Academy of Sciences19A Yuquan RoadBeijing100049P. R. China
| | - Na Cao
- State Key Laboratory of CatalysisDalian Institute of Chemical PhysicsChinese Academy of Sciences457 Zhongshan RoadDalian116023P. R. China
- University of Chinese Academy of Sciences19A Yuquan RoadBeijing100049P. R. China
| | - Yuecheng Wang
- State Key Laboratory of CatalysisDalian Institute of Chemical PhysicsChinese Academy of Sciences457 Zhongshan RoadDalian116023P. R. China
- University of Chinese Academy of Sciences19A Yuquan RoadBeijing100049P. R. China
| | - Weishen Yang
- State Key Laboratory of CatalysisDalian Institute of Chemical PhysicsChinese Academy of Sciences457 Zhongshan RoadDalian116023P. R. China
- University of Chinese Academy of Sciences19A Yuquan RoadBeijing100049P. R. China
| |
Collapse
|
26
|
Zhao M, Ban Y, Yang K, Zhou Y, Cao N, Wang Y, Yang W. A Highly Selective Supramolecule Array Membrane Made of Zero‐Dimensional Molecules for Gas Separation. Angew Chem Int Ed Engl 2021. [DOI: 10.1002/ange.202108185] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Affiliation(s)
- Meng Zhao
- State Key Laboratory of Catalysis Dalian Institute of Chemical Physics Chinese Academy of Sciences 457 Zhongshan Road Dalian 116023 P. R. China
- University of Chinese Academy of Sciences 19A Yuquan Road Beijing 100049 P. R. China
| | - Yujie Ban
- State Key Laboratory of Catalysis Dalian Institute of Chemical Physics Chinese Academy of Sciences 457 Zhongshan Road Dalian 116023 P. R. China
- University of Chinese Academy of Sciences 19A Yuquan Road Beijing 100049 P. R. China
- Dalian National Laboratory for Clean Energy 457 Zhongshan Road Dalian 116023 P. R. China
| | - Kun Yang
- State Key Laboratory of Catalysis Dalian Institute of Chemical Physics Chinese Academy of Sciences 457 Zhongshan Road Dalian 116023 P. R. China
- University of Chinese Academy of Sciences 19A Yuquan Road Beijing 100049 P. R. China
| | - Yingwu Zhou
- State Key Laboratory of Catalysis Dalian Institute of Chemical Physics Chinese Academy of Sciences 457 Zhongshan Road Dalian 116023 P. R. China
- University of Chinese Academy of Sciences 19A Yuquan Road Beijing 100049 P. R. China
| | - Na Cao
- State Key Laboratory of Catalysis Dalian Institute of Chemical Physics Chinese Academy of Sciences 457 Zhongshan Road Dalian 116023 P. R. China
- University of Chinese Academy of Sciences 19A Yuquan Road Beijing 100049 P. R. China
| | - Yuecheng Wang
- State Key Laboratory of Catalysis Dalian Institute of Chemical Physics Chinese Academy of Sciences 457 Zhongshan Road Dalian 116023 P. R. China
- University of Chinese Academy of Sciences 19A Yuquan Road Beijing 100049 P. R. China
| | - Weishen Yang
- State Key Laboratory of Catalysis Dalian Institute of Chemical Physics Chinese Academy of Sciences 457 Zhongshan Road Dalian 116023 P. R. China
- University of Chinese Academy of Sciences 19A Yuquan Road Beijing 100049 P. R. China
| |
Collapse
|
27
|
Jiang Y, Huang Y, Shi X, Lu Z, Ren J, Wang Z, Xu J, Fan Y, Wang L. Eu-MOF and its mixed-matrix membranes as a fluorescent sensor for quantitative ratiometric pH and folic acid detection, and visible fingerprint identifying. Inorg Chem Front 2021. [DOI: 10.1039/d1qi00840d] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/10/2023]
Abstract
The integration of 1 and polymer matrices leads to the fabrication of 1@polymer MMMs, which can be used in the detection of pH and folic acid. Powder samples of 1 also show potential for application in fingerprint identification.
Collapse
Affiliation(s)
- Yansong Jiang
- College of Chemistry, Jilin University, Changchun 130012, Jilin, China
- South China Advanced Institute for Soft Matter Science and Technology, South China University of Technology, Guangzhou 510640, Guangdong, China
| | - Yating Huang
- College of Chemistry, Jilin University, Changchun 130012, Jilin, China
| | - Xiangxiang Shi
- College of Chemistry, Jilin University, Changchun 130012, Jilin, China
| | - Zijing Lu
- Hubei Key Laboratory of Mineral Resources Processing and Environment, School of Resources and Environmental Engineering, Wuhan University of Technology, Wuhan 430072, Hubei, China
| | - Jiamo Ren
- College of Chemistry, Jilin University, Changchun 130012, Jilin, China
| | - Zimo Wang
- College of Chemistry, Jilin University, Changchun 130012, Jilin, China
| | - Jianing Xu
- College of Chemistry, Jilin University, Changchun 130012, Jilin, China
| | - Yong Fan
- College of Chemistry, Jilin University, Changchun 130012, Jilin, China
| | - Li Wang
- College of Chemistry, Jilin University, Changchun 130012, Jilin, China
| |
Collapse
|