Metal-Organic Frameworks: Molecules or Semiconductors in Photocatalysis?

Building Co16-N3-Based UiO-MOF to Expand Design Parameters for MOF Photosensitization

The construction of secondary building units (SBUs) in versatile metal-organic frameworks (MOFs) represents a promising method for developing multi-functional materials, especially for improving their sensitizing ability. Herein, we developed a dual small molecules auxiliary strategy to construct a high-nuclear transition-metal-based UiO-architecture Co16-MOF-BDC with visible-light-absorbing capacity. Remarkably, the N3 - molecule in hexadecameric cobalt azide SBU offers novel modification sites to precise bonding of strong visible-light-absorbing chromophores via click reaction. The resulting Bodipy@Co16-MOF-BDC exhibits extremely high performance for oxidative coupling benzylamine (~100 % yield) via both energy and electron transfer processes, which is much superior to that of Co16-MOF-BDC (31.5 %) and Carboxyl @Co16-MOF-BDC (37.5 %). Systematic investigations reveal that the advantages of Bodipy@Co16-MOF-BDC in dual light-absorbing channels, robust bonding between Bodipy/Co16 clusters and efficient electron-hole separation can greatly boost photosynthesis. This work provides an ideal molecular platform for synergy between photosensitizing MOFs and chromophores by constructing high-nuclear transition-metal-based SBUs with surface-modifiable small molecules.

Unravelling co-catalyst integration methods in Ti-based metal-organic gels for photocatalytic H2 production

The synthesis, characterization and photocatalytic hydrogen evolution reaction (HER) performance of a series of metal-organic gels (MOGs) constructed from titanium(IV)-oxo clusters and dicarboxylato linkers (benzene-1,4-dicarboxylato and 2-aminobenzene-1,4-dicarboxylato) are described. All the MOGs exhibit a microstructure comprised of metal-organic nanoparticles intertwined into a highly meso-/macroporous structure, as demonstrated by cryogenic transmission electron microscopy and gas adsorption isotherms. Comprehensive chemical characterization enabled the estimation of the complex formula for these defective materials, which exhibit low crystallinity and linker vacancies. To gain deeper insights into the local structure, X-ray absorption fine structure (XAFS) spectroscopy experiments were performed and compared to that of the analogous crystalline metal-organic framework. Additionally, the ultraviolet-visible absorption properties and optical band gaps were determined from diffuse reflectance spectroscopy data. The MOGs were studied as light absorbers for the sacrificial photocatalytic HER under simulated solar light irradiation using a platinum co-catalyst by either (1) in situ photodeposition or (2) ex situ doping process, through a post-synthetic metalation of the MOG structure. The chemical analysis of the metalation, along with high-angle annular dark-field scanning transmission electron microscopy, revealed that although the in situ addition of the co-catalyst led to greater HER rates (227 vs. 110 μmolH2 gMOG-1 h-1 for in situ and ex situ, respectively), the ex situ modification provided a finer distribution of platinum nanoparticles along the porous microstructure and, as a result, it led to a more efficient utilization of the co-catalyst (45 vs. 110 mmolH2 gPt-1 h-1).

Metal-organic framework (MOF)/C-dots and covalent organic framework (COF)/C-dots hybrid nanocomposites: Fabrications and applications in sensing, medical, environmental, and energy sectors

Developing new hybrid materials is critical for addressing the current needs of the world in various fields, such as energy, sensing, health, hygiene, and others. C-dots are a member of the carbon nanomaterial family with numerous applications. Aggregation is one of the barriers to the performance of C-dots, which causes luminescence quenching, surface area decreases, etc. To improve the performance of C-dots, numerous matrices including metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), and polymers have been composited with C-dots. The porous crystalline structures, which are constituents of metal nodes and organic linkers (MOFs) or covalently attached organic units (COFs) provide privileged features such as high specific surface area, tunable structures, and pore diameters, modifiable surface, high thermal, mechanical, and chemical stabilities. Also, the MOFs and COFs protect the C-dots from the environment. Therefore, MOF/C-dots and COF/C-dots composites combine their features while retaining topological properties and improving performances. In this review, we first compare MOFs with COFs as matrices for C-dots. Then, the recent progress in developing hybrid MOFs/C-dots and COFs/C-dots composites has been discussed and their applications in various fields have been explained briefly.

Mechanism insight into double S-scheme heterojunctions and atomic vacancies with tunable band structures for notably enhanced light-driven enrofloxacin decomposition

Building narrow band gap semiconductors and fast separation of photogenerated electron-hole (e--h+) structures are of great significance for photocatalytic process. In this contribution, the CeO2-x/C3-yN4/Ce(CO3)(OH) double S-scheme heterojunctions with atomic vacancies tunable band gap (2.54 eV) have been designed and fabricated as a boost photocatalyst for enrofloxacin (ENR) photodegradation. Compared with the control samples, the experimental results indicate that the typical sample (CeO2-x/C3-yN4/Ce(CO3)(OH)-2) achieves the highest ENR photodegradation efficiency (93.6 %) in 240 min under a pH of 6, and the possible photodegradation pathways are also proposed. The superior performance is ascribed to the CeO2-x/C3-yN4/Ce(CO3)(OH) double S-scheme heterojunctions for selective recombination of photogenerated electrons with weak-reduction ability in conduction band (CB) of CeO2-x, C3-yN4 and the photogenerated holes with weak-oxidation nature in valance band (VB) of C3-yN4, Ce(CO3)(OH), which increase the retention rate of photogenerated electrons in CB of Ce(CO3)(OH) and photogenerated holes in VB of CeO2-x to degrade ENR. This is the first systematic study of CeO2-x/C3-yN4/Ce(CO3)(OH) double S-scheme heterojunctions for ENR photodegradation.

Diffusional Electron Transport Coupled to Thermodynamically Driven Electron Transfers in Redox-Conductive Multivariate Metal-Organic Frameworks

The development of redox-conductive metal-organic frameworks (MOFs) and the fundamental understanding of charge propagation through these materials are central to their applications in energy storage, electronics, and catalysis. To answer some unresolved questions about diffusional electron hopping transport and redox conductivity, mixed-linker MOFs were constructed from two statistically distributed redox-active linkers, pyromellitic diimide bis-pyrazolate (PMDI) and naphthalene diimide bis-pyrazolate (NDI), and grown as crystalline thin films on conductive fluorine-doped tin oxide (FTO). Owing to the distinct redox properties of the linkers, four well-separated and reversible redox events are resolved by cyclic voltammetry, and the mixed-linker MOFs can exist in five discrete redox states. Each state is characterized by a unique spectroscopic signature, and the interconversions between the states can be followed spectroscopically under operando conditions. With the help of pulsed step-potential spectrochronoamperometry, two modes of electron propagation through the mixed-linker MOF are identified: diffusional electron hopping transport between linkers of the same type and a second channel that arises from thermodynamically driven electron transfers between linkers of different types. Corresponding to the four redox events of the mixed-linker MOFs, four distinct bell-shaped redox conductivity profiles are observed at a steady state. The magnitude of the maximum redox conductivity is evidenced to be dependent on the distance between redox hopping sites, analogous to the situation for apparent electron diffusion coefficients, Deapp, that are obtained in transient experiments. The design of mixed-linker redox-conductive MOFs and detailed studies of their charge transport properties present new opportunities for future applications of MOFs, in particular, within electrocatalysis.

Stability of Iodine Species Trapped in Titanium-Based MOFs: MIL-125 and MIL-125_NH2

Two titanium-based MOFs MIL-125 and MIL-125_NH2 are synthesized and characterized using high-temperature powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), N2 sorption, Fourier transformed infrared spectroscopy (FTIR), Raman spectroscopy, ultraviolet-visible spectroscopy (UV-Vis), and electron paramagnetic resonance (EPR). Stable up to 300 °C, both compounds exhibited similar specific surface areas (SSA) values (1207 and 1099 m2 g-1 for MIL-125 and MIL-125_NH2, respectively). EPR signals of Ti3+ are observed in both, whith MIL-125_NH2 also showing ─NH2 ●+ signatures. Both MOFs efficiently adsorbed iodine in continuous gas flow over five days, with MIL-125 trapping 1.9 g.g-1 and MIL-125_NH2 trapping 1.6 g.g-1. MIL-125_NH2 exhibited faster adsorption kinetics due to its smaller band gap (2.5 against 3.6 eV). In situ Raman spectroscopy conducted during iodine adsorption revealed signal evolution from "free" I2 to "perturbed" I2, and I3 -. TGA and in situ Raman desorption experiments showed that ─NH2 groups improved the stabilization of I3 - due to an electrostatic interaction with NH2 ●+BDC radicals. The Albery model indicated longer lifetimes for iodine desorption in I2@MIL-125_NH2, attributed to a rate-limiting step due to stronger interaction between the anionic iodine species and the ─NH2 ●+ radicals. This study underscores how MOFs with efficient charge separation and hole-stabilizer functional groups enhance iodine stability at higher temperatures.

Defect-Induced All-Solid-State Frustrated Lewis Pair on Metal-Organic Monolayer Accelerating Photocatalytic CO2 Reduction with H2O Vapor

Understanding the structure-performance relationships of a frustrated Lewis pair (FLP) at the atomic level is key to yielding high efficiency in activating chemically "inert" molecules into value-added products. A sound strategy was developed herein through incorporating oxygen defects into a Zr-based metal-organic layer (Zr-MOL-D) and employing Lewis basic proximal surface hydroxyls for the in situ formation of solid heterogeneous FLP (Zr4-δ-VO-Zr-OH). Zr-MOL-D exhibits a superior CO2 to CO conversion rate of 49.4 μmol g-1 h-1 in water vapor without any sacrificing agent or photosensitizer, which is about 12 times higher than that of pure MOL (Zr-MOL-P), with extreme stability even after being placed for half a year. Theoretical and experimental results reveal that the introduction of FLP converts the process of the crucial intermediate COOH* from an endothermic reaction to an exothermic spontaneous reaction. This work is expected to provide new prospects for developing efficient MOL-based photocatalysts in FLP chemistry through a sound defect-engineering strategy.

Metal-organic Frameworks in Semiconductor Devices

Metal-organic frameworks (MOFs) are a specific class of hybrid, crystalline, nano-porous materials made of metal-ion-based 'nodes' and organic linkers. Most of the studies on MOFs largely focused on porosity, chemical and structural diversity, gas sorption, sensing, drug delivery, catalysis, and separation applications. In contrast, much less reports paid attention to understanding and tuning the electrical properties of MOFs. Poor electrical conductivity of MOFs (~10-7-10-10 S cm-1), reported in earlier studies, impeded their applications in electronics, optoelectronics, and renewable energy storage. To overcome this drawback, the MOF community has adopted several intriguing strategies for electronic applications. The present review focuses on creatively designed bulk MOFs and surface-anchored MOFs (SURMOFs) with different metal nodes (from transition metals to lanthanides), ligand functionalities, and doping entities, allowing tuning and enhancement of electrical conductivity. Diverse platforms for MOFs-based electronic device fabrications, conductivity measurements, and underlying charge transport mechanisms are also addressed. Overall, the review highlights the pros and cons of MOFs-based electronics (MOFtronics), followed by an analysis of the future directions of research, including optimization of the MOF compositions, heterostructures, electrical contacts, device stacking, and further relevant options which can be of interest for MOF researchers and result in improved devices performance.

Heterogeneous Photocatalytic Strategies for C(sp3 )-H Activation

Activation of ubiquitous C(sp3 )-H bonds is extremely attractive but remains a great challenge. Heterogeneous photocatalysis offers a promising and sustainable approach for C(sp3 )-H activation and has been fast developing in the past decade. This Minireview focuses on mechanism and strategies for heterogeneous photocatalytic C(sp3 )-H activation. After introducing mechanistic insights, heterogeneous photocatalytic strategies for C(sp3 )-H activation including precise design of active sites, regulation of reactive radical species, improving charge separation and reactor innovations are discussed. In addition, recent advances in C(sp3 )-H activation of hydrocarbons, alcohols, ethers, amines and amides by heterogeneous photocatalysis are summarized. Lastly, challenges and opportunities are outlined to encourage more efforts for the development of this exciting and promising field.

Time-Resolved Spectroscopy for Dynamic Investigation of Photoresponsive Metal-Organic Frameworks

Photoresponsive MOFs with precise and adjustable reticular structures are attractive for light conversion applications. Uncovering the photoinduced carrier dynamics lays the essential foundation for the further development and optimization of the MOF material. With the application of time-resolved spectroscopy, photophysical processes including excimer formation, energy transfer/migration, and charge transfer/separation have been widely investigated. However, the identification of distinct photophysical processes in real experimental MOF spectra still remains difficult due to the spectral and dynamic complexity of MOFs. In this Perspective, we summarize the typical spectral features of these photophysical processes and the related analysis methods for dynamic studies performed by time-resolved photoluminescence (TR-PL) and transient absorption (TA) spectroscopy. Based on the recent understanding of excited-state properties of photoresponsive MOFs and the discussion of challenges and future outlooks, this Perspective aims to provide convenience for MOF kinetic analysis and contribute to the further development of photoresponsive MOF material.

Metal-organic framework heterojunctions for photocatalysis

Heterojunctions combining two photocatalysts of staggered conduction and valence band energy levels can increase the photocatalytic efficiency compared to their individual components. This activity enhancement is due to the minimization of undesirable charge recombination by the occurrence of carrier migration through the heterojunction interface with separated electrons and holes on the reducing and oxidizing junction component, respectively. Metal-organic frameworks (MOFs) are currently among the most researched photocatalysts due to their tunable light absorption, facile charge separation, large surface area and porosity. The present review summarizes the current state-of-the-art in MOF-based heterojunctions, providing critical comments on the construction of these heterostructures. Besides including examples showing the better performance of MOF heterojunctions for three important photocatalytic processes, such as hydrogen evolution reaction, CO2 photoreduction and dye decolorization, the focus of this review is on describing synthetic procedures to form heterojunctions with MOFs and on discussing the experimental techniques that provide evidence for the operation of charge migration between the MOF and the other component. Special attention has been paid to the design of rational MOF heterojunctions with small particle size and controlled morphology for an appropriate interfacial contact. The final section summarizes the achievements of the field and provides our views on future developments.

Manipulation of interfacial charge dynamics for metal-organic frameworks toward advanced photocatalytic applications

Compared to other known materials, metal-organic frameworks (MOFs) have the highest surface area and the lowest densities; as a result, MOFs are advantageous in numerous technological applications, especially in the area of photocatalysis. Photocatalysis shows tantalizing potential to fulfill global energy demands, reduce greenhouse effects, and resolve environmental contamination problems. To exploit highly active photocatalysts, it is important to determine the fate of photoexcited charge carriers and identify the most decisive charge transfer pathway. Methods to modulate charge dynamics and manipulate carrier behaviors may pave a new avenue for the intelligent design of MOF-based photocatalysts for widespread applications. By summarizing the recent developments in the modulation of interfacial charge dynamics for MOF-based photocatalysts, this minireview can deliver inspiring insights to help researchers harness the merits of MOFs and create versatile photocatalytic systems.

Boosting hydrogen production of a MOF-based multicomponent photocatalyst with clean interface via facile one-pot electrosynthesis

Hydrogen production from photocatalysis via the usage of multicomponent photocatalysts represents a promising pathway for carbon peaking and carbon neutrality, owing to their structural advantages in dealing with the three crucial processes in photocatalysis, namely, light harvesting, charge transfer, and surface redox reactions. We demonstrate the fabrication of a MOF-based multicomponent photocatalyst, denoted as semiconductor/MOF/cocatalyst, by a one-pot electrochemical synthetic route. The as-fabricated multicomponent photocatalyst has a clean interface among the components, leading to close connections that contribute to high-quality heterojunction and facilitate photogenerated charge transfer and separation, thereby the efficient hydrogen evolution. The hydrogen production rate of the resultant ZrO2 /Zr-MOF/Pt is 1327 μmol ⋅ g-1  ⋅ h-1 , which is much higher than that of ZrO2 /Zr-MOF (15 μmol ⋅ g-1  ⋅ h-1 ) and pure Zr-MOF (10.1 μmol ⋅ g-1  ⋅ h-1 ), as well as the photodeposited-Pt products ZrO2 /Zr-MOF/PtPD (287 μmol ⋅ g-1  ⋅ h-1 ) and Zr-MOF/PtPD (192 μmol ⋅ g-1  ⋅ h-1 ) obtained by the step-wise synthetic approach. The work gives a good inspiration for the rational design and construction of MOF-based multicomponent photocatalysts through the one-pot electrosynthesis.

Fluorinated Metal-Organic Frameworks with Dual-Functionalized Linkers to Enhance Photocatalytic H2 Evolution and High Water Adsorption

Photocatalytic H2 evolution has recently attracted much attention due to the reduction of nonrenewable energy sources and the increasing demand for renewable sustainable energies. Meanwhile, metal-organic frameworks (MOFs) are emerging potential photocatalysts due to their structural adaptability, porous configuration, several active sites, and a wide range of performance. Nevertheless, there are still limitations in the photocatalytic H2 evolution reaction of MOFs with higher charge recombination rates. Herein, a copper-organic framework with dual-functionalized linkers {[Cu2(L)(H2O)2]·(5DMF)(4H2O)}n (fluorinated MOF(Cu)-NH2; H4L = 3,5-bis(2,4-dicarboxylic acid)-4-(trifluoromethyl)aniline) and with a rare 2-nodal 4,12-connected shp topology has been synthesized by a ligand-functionalization strategy and evaluated for the photocatalytic production of H2 to overcome this issue. According to the photocatalytic H2 evolution results, fluorinated MOF(Cu)-NH2 showed a hydrogen evolution rate of 63.64 mmol·g-1·h-1 exposed to light irradiation, indicating values 12 times that of the pure ligand when cocatalyst Pt and photosensitizer Rhodamine B were present. In addition, this MOF showed a maximum water absorption of 205 cm3·g-1. When dual-functionalized linkers are introduced to the structure of this MOF, its visible-light absorption increases considerably, which can be associated with nearly narrower energy band gaps (2.18 eV). More importantly, this MOF contributes to water absorption and electron collection and transport, acting as a bridge that helps to separate and transfer photogenerated charges while shortening the electron migration path because of the functional group in its configuration. The current paper seeks to shed light on the design of advanced visible-light photocatalysts with no MOF calcination for H2 photocatalytic production.

Rapid synthesis of cerium-UiO-66 MOF nanoparticles for photocatalytic dye degradation

An unprecedented synthesis method is used to form a series of Ce-UiO-66-X (X = NH2, OH, H, NO2, COOH) metal-organic frameworks by precipitation from mixed solvents, with instantaneous crystallisation on combining separate solutions of ligands and metal precursors. This allows the first direct synthesis of Ce-UiO-66-OH. Powder X-ray diffraction (PXRD) shows that all materials are pure phase with a broadened profile that indicates nano-scale crystallite domain size. The effect of different functional groups on the benzene-1,4-dicarboxylate linker within the UiO-66 structure has been investigated on degradation of two cationic (methylene blue and rhodamine B) and two anionic (Congo red, and Alizarin red S) dyes under UV and visible light irradiation at room temperature. Analysis of the dye adsorption in the absence of light is accounted for using pseudo-first order kinetics, and the Ce-UiO-66-NH2, Ce-UiO-66-OH, and Ce-UiO-66-H materials display a considerable photocatalytic activity to degrade Alizarin red S and Congo red rapidly between 1 and 3 minutes. The materials show excellent photostability and recyclability under UV and visible light, with no loss of crystallinity seen by PXRD and activity maintained over 5 cycles, with 16 hours photostability for Ce-UiO-66-NH2.

Experimental manifestation of redox-conductivity in metal-organic frameworks and its implication for semiconductor/insulator switching

Electric conductivity in metal-organic frameworks (MOFs) follows either a band-like or a redox-hopping charge transport mechanism. While conductivity by the band-like mechanism is theoretically and experimentally well established, the field has struggled to experimentally demonstrate redox conductivity that is promoted by the electron hopping mechanism. Such redox conductivity is predicted to maximize at the mid-point potential of the redox-active units in the MOF, and decline rapidly when deviating from this situation. Herein, we present direct experimental evidence for redox conductivity in fluorine-doped tin oxide surface-grown thin films of Zn(pyrazol-NDI) (pyrazol-NDI = 1,4-bis[(3,5-dimethyl)-pyrazol-4-yl]naphthalenediimide). Following Nernstian behavior, the proportion of reduced and oxidized NDI linkers can be adjusted by the applied potential. Through a series of conductivity measurements, it is demonstrated that the MOF exhibits minimal electric resistance at the mid-point potentials of the NDI linker, and conductivity is enhanced by more than 10000-fold compared to that of either the neutral or completely reduced films. The generality of redox conductivity is demonstrated in MOFs with different linkers and secondary building units, and its implication for applications that require switching between insulating and semiconducting regimes is discussed.

Electron-Donor Functional Groups, Band Gap Tailoring, and Efficient Charge Separation: Three Keys To Improve the Gaseous Iodine Uptake in MOF Materials

Metal-organic frameworks (MOFs) have been largely investigated worldwide for their use in the capture of radioactive iodine due to its potential release during nuclear accident events and reprocessing of nuclear fuel. The present work deals with the capture of gaseous I₂ under a continuous flow and its subsequent transformation into I₃^- within the porous structures of three distinct, yet structurally related, terephthalate-based MOFs: MIL-125(Ti), MIL-125(Ti)_NH₂, and CAU-1(Al)_NH₂. The synthesized materials exhibited specific surface areas (SSAs) with similar order of magnitude: 1207, 1099, and 1110 m² g^-1 for MIL-125(Ti), MIL-125(Ti)_NH₂, and CAU-1(Al)_NH₂, respectively. Because of that, it was possible to evaluate the influence of other variables over the iodine uptake capacity─such as band gap energies, functional groups, and charge transfer complexes (CTC). After 72 h of contact with the I₂ gas flow, MIL-125(Ti)_NH₂ was able to trap 11.0 mol mol^-1 of I₂, followed by MIL-125(Ti) (8.7 mol mol^-1), and by CAU-1(Al)_NH₂ (4.2 mol mol^-1). The enhanced ability to retain I₂ in the MIL-125(Ti)_NH₂ was associated with a combined effect between its amino group (which has a great affinity toward iodine), its smaller band gap (2.5 eV against 2.6 and 3.8 eV for CAU-1(Al)_NH₂ and MIL-125(Ti), respectively), and its efficient charge separation. In fact, the presence of a linker-to-metal charge transfer (LMCT) mechanism in MIL-125(Ti) compounds separates the photogenerated electrons and holes into the two distinct moieties of the MOF: the organic linker (which stabilizes the holes) and the oxy/hydroxy inorganic cluster (which stabilizes the electrons). This effect was observed using EPR spectroscopy, whereas the reduction of the Ti⁴⁺ cations into the paramagnetic Ti³⁺ species was evidenced after irradiation of the pristine Ti-based MOFs with UV light (<420 nm). In contrast, because CAU-1(Al)_NH₂ exhibits a purely linker-based transition (LBT)─with no EPR signals related to Al paramagnetic species─it tends to exhibit faster recombination of the photogenerated charge carriers as, in this case, both electrons and holes are located over the organic linker. Furthermore, the transformation of the gaseous I₂ into I_n^- [n = 5, 7, 9, ...] intermediates and then into I₃^- species was evaluated using Raman spectroscopy by following the evolution of their respective bands at about 198, 180, and 113 cm^-1. This conversion─which is favored by an effective charge separation and smaller band gaps─increases the I₂ uptake capacity of the compounds by creating specific adsorption sites for these anionic species. In fact, because the -NH₂ groups act as an antenna to stabilize the photogenerated holes, both I_n^- and I₃^- are adsorbed into the organic linker via an electrostatic interaction with these positively charged entities. Finally, changes regarding the EPR spectra before and after the iodine loading were considered to propose a mechanism for the electron transfer from the MOFs structure to the I₂ molecules considering their different characteristics.

Metal-organic frameworks in photocatalytic Z-scheme heterojunctions: an emerging technology

There is an urgent need for cleaner production processes for chemicals. An efficient and promising alternative for such reactions is heterogeneous photocatalysis, which works on the principle of converting (visible) light, including solar energy, into chemical energy. To that end, properly designed semiconductor based photocatalysts are necessary to trigger the photocatalytic reactions. Many commonly used photocatalysts have too large bandgaps (3-3.4 eV) to use visible light and a too low surface area for efficient production. Metal-organic frameworks (MOFs) have emerged as an encouraging class of materials for photocatalytic applications due to their (i) large surface area and porosity that facilitate adsorption towards chemicals, (ii) tunable crystallinity and optical and electronic properties for efficient light absorption in the visible region, (iii) tunable composition and functionality that make them versatile photocatalysts for a wide range of reactions, and (iv) facile development of composites with other semiconductors to produce Z-scheme heterojunctions that can effectively suppress the recombination of photogenerated charges. Ongoing research has started focusing on the judicious construction of Z-scheme heterojunctions in MOFs, to mimic natural photosynthesis, such that the MOF photocatalysts have higher light harvesting capacity, spatially separated reductive and oxidative active sites, and well-preserved redox ability. This review provides a concise compilation of the recent progress in the development and applications of MOF-based Z-scheme photocatalysts, their advanced characterization, and future perspectives for further advancements.

Substituted Ti(IV) in Ce-UiO-66-NH2 Metal-Organic Frameworks Increases H2 and O2 Evolution under Visible Light

Metal-organic frameworks (MOFs) as photocatalysts have received increasing attention. In this work, a dual metal-substituted UiO-66-NH₂ (Ti/Ce-MOF) containing different Ti/Ce mole ratios (x = 0-2.46) has been prepared via post-synthetic exchange between Ce-UiO-66 and TiCl₄, followed by amination. The solid had a high surface area (828-937 m²/g) and a large pore volume (0.451-0.507 m³/g). Under visible light, Ti/Ce-MOF showed x-dependent activity for H₂O reduction and oxidation on a film electrode, respectively. However, such a change for H₂ evolution in a Na₂S/Na₂SO₃ aqueous solution was observed only after CdS loading. In combination with the photoluminescence and band parameters, we propose that the photoactivity of Ti/Ce-MOF for redox reaction is determined by its ability for electron transfer. Furthermore, there is an interfacial electron transfer from Ti/Ce-MOF to CdS and a hole transfer from CdS to Ti/Ce-MOF, respectively, significantly improving the efficiency of charge separation for redox reactions. This work offers a new insight that Ti substitution benefits the performance of Ce-based MOF.

Molecular-level Manipulation of Interface Charge Transfer on Plasmonic Metal/MOF Heterostructures

Plasmon-excited hot carriers have drawn great attention for driving various chemical reactions, but the short lifetimes of hot carriers seriously restrict the performance of plasmonic photocatalysis. Constructing plasmonic metal/metal-organic framework (MOF) heterostructures has been proved as an effective strategy to extend the lifetimes of hot carriers. Due to the high molecular tunability of MOFs, the MOF substrate in plasmonic metal/MOF heterostructures is able to capture hot electrons on the conduction band of MOF and hot holes on its valence band, and thus offers an ideal platform to separately study the detailed mechanism of hot electron and hole transfer processes. This review focuses on a molecular-level understanding of both hot-electron and hot-hole transfer at plasmonic metal/MOF interfaces. The enhanced stability and photocatalytic performance by introducing MOF substrates are discussed for plasmonic metal/MOF heterostructures. Additionally, typical characterization technologies are also proposed as powerful tools for tracking hot carrier transfer process.

Metal-Organic Framework-Based Photocatalysis for Solar Fuel Production

Metal-organic frameworks (MOFs) represent a novel class of crystalline inorganic-organic hybrid materials with tunable semiconducting behavior. MOFs have potential for application in photocatalysis to produce sustainable solar fuels, owing to their unique structural advantages (such as clarity and modifiability) that can facilitate a deeper understanding of the structure-activity relationship in photocatalysis. This review takes the photocatalytic active sites as a particular perspective, summarizing the progress of MOF-based photocatalysis for solar fuel production; mainly including three categories of solar-chemical conversions, photocatalytic water splitting to hydrogen fuel, photocatalytic carbon dioxide reduction to hydrocarbon fuels, and photocatalytic nitrogen fixation to high-energy fuel carriers such as ammonia. This review focuses on the types of active sites in MOF-based photocatalysts and discusses their enhanced activity based on the well-defined structure of MOFs, offering deep insights into MOF-based photocatalysis.

Rational Design of a Core-Shell Structured Plasmonic Au@MIL-100(Fe) Nanocomposite for Efficient Photocatalysis

The utilization of solar light to trigger organic syntheses for the production of value-added chemicals has attracted increasing recent research attention. The integration of plasmonic Au NPs (NPs = nanoparticles) with MOFs would provide a new way for the development of highly efficient photocatalytic systems. In this manuscript, a bottle-around-ship strategy was adopted for the successful synthesis of a core-shell structured Au_pvp@MIL-100(Fe) (PVP = polyvinylpyrrolidone) nanocomposite in room temperature. The as-obtained core-shell structured Au_pvp@MIL-100(Fe) show improved photocatalytic performance for benzyl alcohol oxidation under visible light, because of the migration of the surface plasmon resonance (SPR) excited hot electrons from plasmonic Au NPs to MIL-100(Fe), resulting in the production of more active O₂^•- radicals. The removal of the capping agent PVP from Au_pvp@MIL-100(Fe) significantly enhanced the photocatalytic performance, because of an improved charge transfer from plasmonic Au NPs to MIL-100(Fe). This study demonstrates an efficient strategy of fabricating superior photocatalytic systems by a rational coupling of plasmonic Au NPs and photocatalytic active MOFs into a core-shell structured nanocomposite.

Metal-Organic Frameworks as Photocatalysts for Solar-Driven Overall Water Splitting

Metal-organic frameworks (MOFs) have been frequently used as photocatalysts for the hydrogen evolution reaction (HER) using sacrificial agents with UV-vis or visible light irradiation. The aim of the present review is to summarize the use of MOFs as solar-driven photocatalysts targeting to overcome the current efficiency limitations in overall water splitting (OWS). Initially, the fundamentals of the photocatalytic OWS under solar irradiation are presented. Then, the different strategies that can be implemented on MOFs to adapt them for solar photocatalysis for OWS are discussed in detail. Later, the most active MOFs reported until now for the solar-driven HER and/or oxygen evolution reaction (OER) are critically commented. These studies are taken as precedents for the discussion of the existing studies on the use of MOFs as photocatalysts for the OWS under visible or sunlight irradiation. The requirements to be met to use MOFs at large scale for the solar-driven OWS are also discussed. The last section of this review provides a summary of the current state of the field and comments on future prospects that could bring MOFs closer to commercial application.

An Overview of the Design of Metal-Organic Frameworks-Based Fluorescent Chemosensors and Biosensors

Taking advantage of high porosity, large surface area, tunable nanostructures and ease of functionalization, metal-organic frameworks (MOFs) have been popularly applied in different fields, including adsorption and separation, heterogeneous catalysis, drug delivery, light harvesting, and chemical/biological sensing. The abundant active sites for specific recognition and adjustable optical and electrical characteristics allow for the design of various sensing platforms with MOFs as promising candidates. In this review, we systematically introduce the recent advancements of MOFs-based fluorescent chemosensors and biosensors, mainly focusing on the sensing mechanisms and analytes, including inorganic ions, small organic molecules and biomarkers (e.g., small biomolecules, nucleic acids, proteins, enzymes, and tumor cells). This review may provide valuable references for the development of novel MOFs-based sensing platforms to meet the requirements of environment monitoring and clinical diagnosis.

Metal-organic framework (MOF)-5/CuO@ZnIn2S4 core-shell Z-scheme tandem heterojunctions for improved charge separation and enhanced photocatalytic performance

Interface engineering is regarded as an effective strategy for charge separation. Metal-organic framework (MOF)-5/CuO@ZnIn₂S₄ core-shell Z-scheme tandem heterojunctions with a three-dimensional floral spherical shape are prepared by a two-step solvothermal and oxidative method. The flower spherical core-shell structure enhances multiple reflections and refractions of light and thus improves light utilization efficiently. In addition, this core-shell structure can supply sufficient active sites for photocatalytic reactions. Meanwhile, the composition of Z-scheme tandem heterojunctions and the photothermal effect contributed to the spatial charge separation and accelerated the photocatalytic process. The photocatalytic hydrogen production rate of MOF-5/CuO@ZnIn₂S₄ (1938.3 μmol g^-1 h^-1) is 18 times higher than that of pristine MOF-5, and the photocatalytic degradation efficiency of 2,4-dichlorophenol and phenol can reach up to 98.7% and 97.3%, respectively. In addition, multiple cycle experiments demonstrate high stability, which is favorable for practical applications.

Biomimetic control of charge transfer in MOFs by solvent coordination for boosting photocatalysis

The role of the coordination solvent in MOFs with photocatalysis can't be ignored. Novel [Ni(PTCA)·sol]-MOFs with a 3D open wavy-layered structure are selected for in-depth study by imitating the internal environment of a chameleon. The results confirm that the coordination solvent can modulate the band structure and the polarity is the key to accelerate the formation of intermediate H*.

Recent Progress of Metal-Organic Frameworks and Metal-Organic Frameworks-Based Heterostructures as Photocatalysts

In the field of photocatalysis, metal-organic frameworks (MOFs) have drawn a lot of attention. MOFs have a number of advantages over conventional semiconductors, including high specific surface area, large number of active sites, and an easily tunable porous structure. In this perspective review, different synthesis methods used to prepare MOFs and MOFs-based heterostructures have been discussed. Apart from this, the application of MOFs and MOFs-based heterostructures as photocatalysts for photocatalytic degradation of different types of pollutants have been compiled. This paper also highlights the different strategies that have been developed to modify and regulate pristine MOFs for improved photocatalytic performance. The MOFs modifications may result in better visible light absorption, effective photo-generated charge carriers (e^-/h⁺), separation and transfer as well as improved recyclability. Despite that, there are still many obstacles and challenges that need to be addressed. In order to meet the requirements of using MOFs and MOFs-based heterostructures in photocatalysis for low-cost practical applications, future development and prospects have also been discussed.

The Chemistry and Applications of Metal-Organic Frameworks (MOFs) as Industrial Enzyme Immobilization Systems

Enzymatic biocatalysis is a sustainable technology. Enzymes are versatile and highly efficient biocatalysts, and have been widely employed due to their biodegradable nature. However, because the three-dimensional structure of these enzymes is predominantly maintained by weaker non-covalent interactions, external conditions, such as temperature and pH variations, as well as the presence of chemical compounds, can modify or even neutralize their biological activity. The enablement of this category of processes is the result of the several advances in the areas of molecular biology and biotechnology achieved over the past two decades. In this scenario, metal–organic frameworks (MOFs) are highlighted as efficient supports for enzyme immobilization. They can be used to ‘house’ a specific enzyme, providing it with protection from environmental influences. This review discusses MOFs as structures; emphasizes their synthesis strategies, properties, and applications; explores the existing methods of using immobilization processes of various enzymes; and lists their possible chemical modifications and combinations with other compounds to formulate the ideal supports for a given application.

Charge Separation by Creating Band Bending in Metal-Organic Frameworks for Improved Photocatalytic Hydrogen Evolution

Metal-organic frameworks (MOFs) have been intensively studied as a class of semiconductor-like materials in photocatalysis. However, band bending, which plays a crucial role in semiconductor photocatalysis, has not yet been demonstrated in MOF photocatalysts. Herein, a representative MOF, MIL-125-NH₂ , is integrated with the metal oxides (MoO₃ and V₂ O₅ ) that feature appropriate work functions and energy levels to afford the corresponding MOF composites. Surface photovoltage results demonstrate band bending in the MOF composites, which gives rise to the built-in electric field of MIL-125-NH₂ , boosting the charge separation. As a result, the MOF composites present 56 and 42 times higher activities, respectively, compared to the pristine MOF for photocatalytic H₂ production. Upon depositing Pt onto the MOF, ∼6 times higher activity is achieved. This work illustrates band bending of MOFs for the first time, supporting their semiconductor-like nature, which would greatly promote MOF photocatalysis.

Iodine Uptake by Zr-/Hf-Based UiO-66 Materials: The Influence of Metal Substitution on Iodine Evolution

Many works reported the encapsulation of iodine in metal-organic frameworks as well as the I₂ → I₃^- chemical conversion. This transformation has been examined by adsorbing gaseous iodine on a series of UiO-66 materials and the different Hf/Zr metal ratios (0-100% Hf) were evaluated during the evolution of I₂ into I₃^-. The influence of the hafnium content on the UiO-66 structure was highlighted by PXRD, SEM images, and gas sorption tests. The UiO-66(Hf) presented smaller lattice parameter (a = 20.7232 Å), higher crystallite size (0.18 ≤ Φ ≤ 3.33 μm), and smaller SSA_BET (818 m²·g^-1) when compared to its parent UiO-66(Zr) ─ a = 20.7696 Å, 100 ≤ Φ ≤ 250 nm, and SSA_BET = 1262 m²·g^-1. The effect of replacing Zr atoms by Hf in the physical properties of the UiO-66 was deeply evaluated by a spectroscopic study using UV-vis, FTIR, and Raman characterizations. In this case, the Hf presence reduced the band gap of the UiO-66, from 4.07 eV in UiO-66(Zr) to 3.98 eV in UiO-66(Hf). Furthermore, the UiO-66(Hf) showed a blue shift for several FTIR and Raman bands, indicating a stiffening on the implied interatomic bonds when comparing to UiO-66(Zr) spectra. Hafnium was found to clearly favor the capture of iodine [285 g·mol^-1, against 230 g·mol^-1 for UiO-66(Zr)] and the kinetic evolution of I₂ into I₃^- after 16 h of I₂ filtration. Three iodine species were typically identified by Raman spectroscopy and chemometric analysis. These species are as follows: "free" I₂ (206 cm^-1), "perturbed" I₂ (173 cm^-1), and I₃^- (115 and 141 cm^-1). It was also verified, by FTIR spectroscopy, that the oxo and hydroxyl groups of the inorganic [M₆O₄(OH)₄] (M = Zr, Hf) cluster were perturbed after the adsorption of I₂ into UiO-66(Hf), which was ascribed to the higher acid character of Hf. Finally, with that in mind and considering that the EPR results discard the possibility of a redox phenomenon involving the tetravalent cations (Hf⁴⁺ or Zr⁴⁺), a mechanism was proposed for the conversion of I₂ into I₃^- in UiO-66─based on an electron donor-acceptor complex between the aromatic ring of the BDC linker and the I₂ molecule.

Recent Progress in the Development of MOF-Based Photocatalysts for the Photoreduction of Cr(VI)

There has been a direct correlation between the rate of industrial development and the spread of pollution on Earth, particularly in the last century. The organic and inorganic pollutants generated from industrial activities have created serious risks to human life and the environment. The concept of sustainability has emerged to tackle the environmental issues in developing chemical-based industries. However, pollutants have continued to be discharged to water resources, and finding appropriate techniques for the removal and remedy of wastewater is in high demand. Chromium is one of the high-risk heavy metals in industrial wastewaters that should be removed via physical adsorption and/or transformed into less hazardous chemicals. Photocatalysis as a sustainable process has received considerable attention as it utilizes sunlight irradiation to remedy Cr^(VI) via a cost-effective process. Numerous photocatalytic systems have been developed up to now, but metal-organic frameworks (MOFs) have gained growing attention because of their unique versatilities and facile structural modulations. A variety of MOF-based photocatalysts have been widely employed for the photoreduction of Cr^(VI). Here, we review the recent progress in the design of MOF photocatalysts and summarize their performance in photoreduction reactions.

New Trends in Nanoarchitectured SERS Substrates: Nanospaces, 2D Materials, and Organic Heterostructures

This article reviews recent fabrication methods for surface-enhanced Raman spectroscopy (SERS) substrates with a focus on advanced nanoarchitecture based on noble metals with special nanospaces (round tips, gaps, and porous spaces), nanolayered 2D materials, including hybridization with metallic nanostructures (NSs), and the contemporary repertoire of nanoarchitecturing with organic molecules. The use of SERS for multidisciplinary applications has been extensively investigated because the considerably enhanced signal intensity enables the detection of a very small number of molecules with molecular fingerprints. Nanoarchitecture strategies for the design of new NSs play a vital role in developing SERS substrates. In this review, recent achievements with respect to the special morphology of metallic NSs are discussed, and future directions are outlined for the development of available NSs with reproducible preparation and well-controlled nanoarchitecture. Nanolayered 2D materials are proposed for SERS applications as an alternative to the noble metals. The modern solutions to existing limitations for their applications are described together with the state-of-the-art in bio/environmental SERS sensing using 2D materials-based composites. To complement the existing toolbox of plasmonic inorganic NSs, hybridization with organic molecules is proposed to improve the stability of NSs and selectivity of SERS sensing by hybridizing with small or large organic molecules.

Synthesis of Carbon Nanoparticles with Cobalt-Rich Shell via Pyrolysis of Zn-ZIF@Co/Zn-ZIF: Relevance of Co(III) Precursors

To the best of our knowledge, this is the first report on the rapid one-pot synthesis of a unique core-shell-structured zeolitic imidazolate framework (ZIF) using Co(III) and Zn(II) precursors. The key to obtaining this unique structure is the use of a Co(III) precursor as the starting material. Transmission electron microscopy (TEM) reveals that Co was present within a 30-nm-thick shell layer of the ZIF material. Thermal decomposition of the ZIF material affords core-shell-structured carbon nanoparticles that have Co on the external surface of the carbon grain. We have previously demonstrated that this carbonaceous material obtained by thermal decomposition exhibited high performance as an adsorbent for nitric oxide, even in the presence of excess oxygen and water vapor, and therefore, it was a suitable material for NO_x elimination at low temperatures. The growth mechanism of the synthesized ZIF particles and the differences between synthesized ZIF and conventional Co(II)-ZIF-67 are discussed. The reactivity of the Co(III) precursor is much lower than that of the Co(II) species, leading to slower precipitation of Co(III) than that of Zn(II), thus forming the core-shell structure.

Selectively Regulating Lewis Acid-Base Sites in Metal-Organic Frameworks for Achieving Turn-On/Off of the Catalytic Activity in Different CO2 Reactions

Regulating Lewis acid-base sites in catalysts to investigate their influence in the chemical fixation of CO₂ is significant but challenging. A metal-organic framework (MOF) with open metal Co sites, {(NH₂ Me₂ )[Co₃ (μ₃ -OH)(BTB)₂ (H₂ O)]⋅9 H₂ O⋅5 DMF}_n (1), was obtained and the results of the catalytic investigation show that 1 can catalyze cycloaddition of CO₂ and aziridines to give 99 % yield. The efficiency of the cyclization of CO₂ with propargyl amines is only 32 %. To improve the catalytic ability of 1, ligand XN with Lewis base sites was introduced into 1 and coordinated with the open Co sites, resulting in a decrease of the Lewis acid sites and an increase in the Lewis base sites in a related MOF 2 ({(NH₂ Me₂ )[Co₃ (μ₃ -OH)(NHMe₂ )(BTB)₂ (XN)]⋅8 H₂ O⋅4 DMF}_n ). Selective regulation of the type of active centers causes the yield of oxazolidinones to be enhanced by about 2.4 times, suggesting that this strategy can turn on/off the catalytic activity for different reactions. The catalytic results from 2 treated with acid solution support this conclusion. This work illuminates a MOF-construction strategy that produces efficient catalysts for CO₂ conversion.

Discovery of Electronic Structure and Interfacial Interaction Features in Catalytic Activity

The selective transformation of inert bonds (C-H, C-O, C-C, C-F, etc.) via various catalysts is one of the most challenging areas, with applications in organic synthesis, materials science, and biological and pharmaceutical chemistry. The catalytic performance of homogeneous and heterogeneous catalysts can be rationally controlled in two ways: (i) electronic structure modulation of the active site, such as the metal center, ligands, and coordination modes, to improve the catalytic activity and stability and (ii) tuning intermolecular or interfacial interactions to promoting the reaction kinetics by accelerating the transmission of electrons between the catalyst and solvents or support. The rational design of catalysts based on adjustable features, such as metal (monometallic or bimetallic) active sites, crystal phase, ligands, solvents, and supports for inert bond activation under mild conditions remains a challenge. This Perspective summarizes the features of electronic structures, interfacial interactions, and their effects on molecular catalysis, metal-organic frameworks (MOFs), and natural mineral catalysis. The discovery of efficient catalysts could be promoted using machine-learning methods with high-performance descriptors. More attention should be paid to high-throughput quantum-chemical computations and experiments, automatic searches of chemical reaction pathways, and efficient machine-learning or deep-learning methods to accelerate catalyst design and synthesis in the future.

A new porphyrinic vanadium-based MOF constructed from infinite V(OH)O4 chains: syntheses, characterization and photoabsorption properties

A new porphyrinic vanadium-based metal–organic framework (MOF), namely V-MOF-10 [V2(OH)2(H2TCPP)], constructed from {V(OH)O4}∞ chains and 4-tetracarboxyphenylporphyrin linkers, was synthesized by a solvothermal procedure.

Cerium versus zirconium UiO66 metal–organic frameworks coupled with CdS for H2 evolution under visible light

Metal–organic frameworks (MOFs) as highly porous photocatalysts have received increasing attention.

Permanent Porosity in Hydroxamate Titanium-Organic Polyhedra

Following the synthesis of hydroxamate titanium-organic frameworks, we now extend these siderophore-type linkers to the assembly of the first titanium-organic polyhedra displaying permanent porosity. Mixed-linker versions of this molecular cage (cMUV-11) are also used to demonstrate the effect of pore chemistry in accessing high surface areas of near 1200 m²·g^-1.