Highly Active PdO/Mn3 O4 /CeO2 Nanocomposites Supported on One Dimensional Halloysite Nanotubes for Photoassisted Thermal Catalytic Methane Combustion

Photodriven Methane Conversion on Transition Metal Oxide Catalyst: Recent Progress and Prospects

Methane as the main component in natural gas is a promising chemical raw material for synthesizing value-added chemicals, but its harsh chemical conversion process often causes severe energy and environment concerns. Photocatalysis provides an attractive path to active and convert methane into various products under mild conditions with clean and sustainable solar energy, although many challenges remain at present. In this review, recent advances in photocatalytic methane conversion are systematically summarized. As the basis of methane conversion, the activation of methane is first elucidated from the structural basis and activation path of methane molecules. The study is committed to categorizing and elucidating the research progress and the laws of the intricate methane conversion reactions according to the target products, including photocatalytic methane partial oxidation, reforming, coupling, combustion, and functionalization. Advanced photocatalytic reactor designs are also designed to enrich the options and reliability of photocatalytic methane conversion performance evaluation. The challenges and prospects of photocatalytic methane conversion are also discussed, which in turn offers guidelines for methane-conversion-related photocatalyst exploration, reaction mechanism investigation, and advanced photoreactor design.

Bayesian Optimization-guided Discovery of High-performance Methane Combustion Catalysts based on Multi-component PtPd@CeZrOx Core-Shell Nanospheres

Formula regulation of multi-component catalysts by manual search is undoubtedly a time-consuming task, which has severely impeded the development efficiency of high-performance catalysts. In this work, PtPd@CeZrOx core-shell nanospheres, as a successful case study, is explicitly demonstrated how Bayesian optimization (BO) accelerates the discovery of methane combustion catalysts with the optimal formula ratio (the Pt/Pd mole ratio ranges from 1/2.33-1/9.09, and Ce/Zr from 1/0.22-1/0.35), which directly results in a lower conversion temperature (T50 approaching to 330 °C) than ones reported hitherto. Consequently, the best sample obtained could be efficiently developed after two rounds of iterations, containing only 18 experiments in all that is far less than the common human workload via the traditional trial-and-error search for optimal compositions. Further, this BO-based machine learning strategy can be straightforward extended to serve the autonomous discovery in multi-component material systems, for other desired properties, showing promising opportunities to practical applications in future.

What is the role of interface in the catalytic elimination of multi-carbon air pollutants?

Multi-carbon air pollutants pose serious hazards to the environment and health, especially soot and volatile organic compounds (VOCs). Catalytic oxidation is one of the most effective technologies for eliminating them. The oxidation of soot and most hydrocarbon VOCs begins with C-H (or edge-CH) activation, so this commonality can be targeted to design active sites. Rationally designed interface nanostructures optimize metal-support interactions (MSIs), providing suitable active sites for C-H activation. Meanwhile, the interfacial reactant spillover facilitates the further decomposition of activated intermediates. Thus, rationally exploiting interfacial effects is critical to enhancing catalytic activity. In this review, we analyzed recent advances in the following aspects: I. Understanding of the interface effects and design; II. Optimization of the catalyst-reactant contact, metal-support interface, and MSIs; III. Design of the interfacial composition and perimeter. Based on the analysis of the advances and current status, we provided challenges and opportunities for the rational design of interface nanostructures and interface-related stability. Meanwhile, a critical outlook was given on the interfacial sites of single-atom catalysts (SACs) for specific activation and catalytic selectivity.

Cellulose nanocrystal/halloysite nanotube composite aerogels for water purification

The quest for advanced water purification technologies has been vigorous over recent decades, motivated by the promise of ever more efficient, greener, and affordable tools. Halloysite nanotubes (HNTs) are naturally-occurring materials that have shown potential as dye sorbents. Unfortunately, these nanoclays suffer from low permeation during water treatment, which limits their widespread application. Here, we use cellulose nanocrystals (CNCs) as structural scaffolds to support HNTs and fabricate permeable aerogel sorbent materials with mechanical stability. Aerogels containing 40 wt% HNTs showed a maximum dye adsorption capacity of 60 mg g-1 towards methylene blue, with only 15% decay in efficiency after 5 cycles. The good mechanical properties of these materials allowed for their incorporation into free-flowing purification columns that displayed excellent dye removal ability. Overall, this work provides a new strategy to fabricate green, renewable, and low-cost sorbent materials for the removal of dyes and shows potential for the sorption of other ionic pollutants.

Recent Developments of Inorganic Nanosensitizers for Sonodynamic Therapy

As a noninvasive treatment, sonodynamic therapy (SDT) has been widely used in the treatment of tumors because of its ability to penetrate deep tissue with few side effects. As the key factor of SDT, it is meaningful to design and synthesize efficient sonosensitizers. Compared with organic sonosensitizers, inorganic sonosensitizers can be easily excited by ultrasound. In addition, inorganic sonosensitizers with stable properties, good dispersion, and long blood circulation time, have great development potential in SDT. This review summarizes possible mechanisms of SDT (sonoexcitation and ultrasonic cavitation) in detail. Based on these mechanisms, the design and synthesis of inorganic nanosonosensitizers can be divided into three categories: traditional inorganic semiconductor sonosensitizers, enhanced inorganic semiconductor sonosensitizers, and cavitation-enhanced sonosensitizers. Subsequently, the current efficient construction methods of sonosensitizers are summarized including accelerated semiconductor charge separation and enhanced production of reactive oxygen species through ultrasonic cavitation. Furthermore, the advantages and disadvantages of different inorganic sonosensitizers and detailed strategies are systematically discussed on how to enhance SDT. Hopefully, this review could provide new insights into the design and synthesis of efficient inorganic nano-sonosensitizers for SDT.

Photothermal Nanomaterials: A Powerful Light-to-Heat Converter

All forms of energy follow the law of conservation of energy, by which they can be neither created nor destroyed. Light-to-heat conversion as a traditional yet constantly evolving means of converting light into thermal energy has been of enduring appeal to researchers and the public. With the continuous development of advanced nanotechnologies, a variety of photothermal nanomaterials have been endowed with excellent light harvesting and photothermal conversion capabilities for exploring fascinating and prospective applications. Herein we review the latest progresses on photothermal nanomaterials, with a focus on their underlying mechanisms as powerful light-to-heat converters. We present an extensive catalogue of nanostructured photothermal materials, including metallic/semiconductor structures, carbon materials, organic polymers, and two-dimensional materials. The proper material selection and rational structural design for improving the photothermal performance are then discussed. We also provide a representative overview of the latest techniques for probing photothermally generated heat at the nanoscale. We finally review the recent significant developments of photothermal applications and give a brief outlook on the current challenges and future directions of photothermal nanomaterials.

Bandgap engineering approach for designing CuO/Mn3O4/CeO2 heterojunction as a novel photocatalyst for AOP-assisted degradation of Malachite green dye

A ternary nanohybrid CuO/Mn₃O₄/CeO₂ was developed in the present work using a co-precipitation-assisted hydrothermal method. The designed photocatalyst's structural, morphology, elemental composition, electronic states of elements, and optical properties were studied using corresponding analytical techniques. Results from PXRD, TEM/HRTEM, XPS, EDAX, and PL showed that the desired nanostructure had formed. Using Tauc's energy band gap plot, it was determined that the nanostructures band gap was ~ 2.44 eV, which showed the band margins of the various moieties, CeO₂, Mn₃O₄, and CuO, had modified. Thus, improved redox conditions led to a substantial decrease in the recombination rate of electron-hole pairs, which was further explained by a PL study in that charge separation plays a key role. Under exposure to visible light irradiation for 60 min, it was revealed that the photocatalyst achieved 98.98% of photodegradation efficiency for malachite green (MG) dye. The process of photodegradation proceeded according to a pseudo-first-order reaction kinetic model with an excellent rate of reaction of 0.07295 min^-1 with R² = 0.99144. The impacts of different reaction variables, inorganic salts, and water matrices were investigated. This research seeks to create a ternary nanohybrid photocatalyst with high photostability, visible spectrum activity, and reusability up to four cycles.

Current Progress on Methods and Technologies for Catalytic Methane Activation at Low Temperatures

Methane (CH₄ ) is an attractive energy source and important greenhouse gas. Therefore, from the economic and environmental point of view, scientists are working hard to activate and convert CH₄ into various products or less harmful gas at low-temperature. Although the inert nature of CH bonds requires high dissociation energy at high temperatures, the efforts of researchers have demonstrated the feasibility of catalysts to activate CH₄ at low temperatures. In this review, the efficient catalysts designed to reduce the CH₄ oxidation temperature and improve conversion efficiencies are described. First, noble metals and transition metal-based catalysts are summarized for activating CH₄ in temperatures ranging from 50 to 500 °C. After that, the partial oxidation of CH₄ at relatively low temperatures, including thermocatalysis in the liquid phase, photocatalysis, electrocatalysis, and nonthermal plasma technologies, is briefly discussed. Finally, the challenges and perspectives are presented to provide a systematic guideline for designing and synthesizing the highly efficient catalysts in the complete/partial oxidation of CH₄ at low temperatures.

Exploring maleimide-anchored halloysites as nanophotoinitiators for surface-initiated photografting strategies

Maleimide-functionalized HNTs (HNTs-I) were prepared and explored as a nanophotoinitiator. Vinyl monomers can be grafted onto the nanotubes following a spatially controllable, metal-free and non-contact photoinitiated approach. The obtained HNTs-I were further used in a 3D printing system to fabricate hydrogels with designed configurations.

Rational Design of Precious-Metal Single-Atom Catalysts for Methane Combustion

Supported precious-metal single-atom catalysts (PM SACs) have emerged as a new frontier of high-performance catalytic material with 100% atom utilization efficiency. However, the rational design of such material with guidance from fundamental understandings of the structure-activity relationship remains challenging. Here, we report the synthesis, characterizations, and mechanistic investigation of various PM SACs supported on nanoceria for CH₄ combustion. Using density functional theory, two descriptors as the d-band center of PMs and oxygen vacancy formation energy are established, which jointly govern the reactivity for CH₄ combustion. These descriptors are thus applied to predict a dual SAC consisting of proximate Pd and Rh sites, demonstrating a remarkable improvement versus Pd or Rh catalyst, respectively. Our results reveal the general strategy of integrating experimental and computational efforts for investigation of various PM SACs in methane combustion, thus paving the way for the next generation of advanced catalytic materials.

Keys Unlocking Redispersion of Reactive PdOx Nanoclusters on Ce-Functionalized Perovskite Oxides for Methane Activation

Nowadays, trace CH₄ emitted from vehicle exhausts severely threaten the balance of the ecology system of our earth. Thereby, the development of active and stable catalysts capable of methane conversion under mild conditions is critical. Here, we present a convenient method to redisperse catalytically inert PdO nanoparticles (NPs) (>10 nm) into reactive PdO_x nanoclusters (∼2 nm) anchored on a Ce-doped LaFeO₃ parent. Isothermally activated in an N₂ flow, the redispersed catalyst achieved a CH₄ conversion of 90% at 400 °C, which is significantly higher than the fresh and H₂- and O₂-treated counterparts (625, 616, and 641 °C, respectively), indicating the importance of the gas atmosphere in the redispersion of PdO NPs. In addition, the comprehensive catalyst characterizations demonstrated that the isolated Ce ions in the perovskite lattice play an irreplaceable role in the redispersion of reactive sites and the reduction of the energy barrier for C-H scission. More importantly, the Ce additive helps to stabilize the PdO_x species by reducing overoxidation, resulting in significant lifetime extension. Through a thorough understanding of structural manipulation, this study sheds light on the design of highly performing supported catalysts for methane oxidation.

Photothermal Synergistic Effect of Pt1/CuO-CeO2 Single-Atom Catalysts Significantly Improving Toluene Removal

Photothermal synergistic catalytic oxidation of toluene over single-atom Pt catalysts was investigated. Compared with the conventional thermocatalytic oxidation in the dark, toluene conversion and CO₂ yield over 0.39Pt₁/CuO-CeO₂ under simulated solar irradiation (λ = 320-2500 nm, optical power density = 200 mW cm^-2) at 180 °C could be increased about 48%. An amount of CuO was added to CeO₂ to disperse single-atom Pt with a maximal Pt loading of 0.83 wt %. The synergistic effect between photo- and thermocatalysis is very important for the development of new pollutant treatment technology with high efficiency and low energy consumption. Both light and heat played an important role in the present photothermal synergistic catalytic oxidation. 0.39Pt₁/CuO-CeO₂ showed good redox performance and excellent optical properties and utilized the full-spectrum solar energy. Light illumination induced the generation of reactive oxygen species (^•OH and ^•O₂^-), which accelerated the transformation of intermediates, promoted the release of active sites on the catalyst surface, and improved the oxidation reaction.

Thermo-photo catalysis: a whole greater than the sum of its parts

Thermo-photo catalysis, which is the catalysis with the participation of both thermal and photo energies, not only reduces the large energy consumption of thermal catalysis but also addresses the low efficiency of photocatalysis. As a whole greater than the sum of its parts, thermo-photo catalysis has been proven as an effective and promising technology to drive chemical reactions. In this review, we first clarify the definition (beyond photo-thermal catalysis and plasmonic catalysis), classification, and principles of thermo-photo catalysis and then reveal its superiority over individual thermal catalysis and photocatalysis. After elucidating the design principles and strategies toward highly efficient thermo-photo catalytic systems, an ample discussion on the synergetic effects of thermal and photo energies is provided from two perspectives, namely, the promotion of photocatalysis by thermal energy and the promotion of thermal catalysis by photo energy. Subsequently, state-of-the-art techniques applied to explore thermo-photo catalytic mechanisms are reviewed, followed by a summary on the broad applications of thermo-photo catalysis and its energy management toward industrialization. In the end, current challenges and potential research directions related to thermo-photo catalysis are outlined.

Mitochondria-Targeting MoS2-Based Nanoagents for Enhanced NIR-II Photothermal-Chemodynamic Synergistic Oncotherapy

The synergy of chemodynamic therapy (CDT) and photothermal therapy (PTT) can improve anticancer efficacy, while the limited diffusion distance and the short lifetime of ^•OH still greatly restrict the therapeutic efficacy of PTT-CDT. Herein, MoS₂@PDA-Fe@PEG/TPP (MPFPT) nanosheets (NSs) with mitochondria-targeting ability were reported for enhanced PTT-CDT synergistic oncotherapy. MPFPT NSs were prepared by covalent modification of poly(ethylene glycol) (PEG) and triphenylphosphonium (TPP) on polydopamine (PDA)-Fe³⁺coated MoS₂ NSs. Co-localization experiments showed that MPFPT NSs can efficiently target mitochondria via the direction of TPP. Moreover, MPFPT NSs have good photothermal performance in the second near-infrared (NIR-II) region and can greatly accelerate the Fenton reaction from H₂O₂ to generate more hydroxyl radicals (^•OH). In vitro experimental results showed that MPFPT NSs have improved therapeutic efficacy to cancer cells than similar MoS₂-based nanoagents without mitochondria-targeting units, which can be attributed to the short distance between mitochondria and MPFPT NSs and the efficient damage of mitochondria by in situ generated ^•OH. In the 4T1 tumor-bearing mice model, MPFPT NSs demonstrated significantly enhanced therapeutic efficacy by PTT-CDT, suggesting the superiority of the mitochondria-targeting strategy. This study reveals that mitochondria-targeting MPFPT NSs are promising nanoagents for oncotherapy.

Photocarrier-assisted photothermocatalysis of Fischer–Tropsch synthesis for the enhanced yield of C2–C4 hydrocarbons over a Co/SrTiO3 catalyst

Photocarrier-assisted photothermocatalysis enhanced the selectivity to C2−C4 hydrocarbons, which can be ascribed to the combined effect of photocatalysis and photothermal catalysis.