Fully Condensed Poly (Triazine Imide) Crystals: Extended π-Conjugation and Structural Defects for Overall Water Splitting

Engineering of Graphitic Carbon Nitride (g-C3N4) Based Photocatalysts for Atmospheric Protection: Modification Strategies, Recent Progress, and Application Challenges

Graphitic carbon nitride (g-C3N4) is a prominent photocatalyst that has attracted substantial interest in the field of photocatalytic environmental remediation due to the low cost of fabrication, robust chemical structure, adaptable and tunable energy bandgaps, superior photoelectrochemical properties, cost-effective feedstocks, and distinctive framework. Nonetheless, the practical application of bulk g-C3N4 in the photocatalysis field is limited by the fast recombination of photogenerated e--h+ pairs, insufficient surface-active sites, and restricted redox capacity. Consequently, a great deal of research has been devoted to solving these scientific challenges for large-scale applications. This review concisely presents the latest advancements in g-C3N4-based photocatalyst modification strategies, and offers a comprehensive analysis of the benefits and preparation techniques for each strategy. It aims to articulate the complex relationship between theory, microstructure, and activities of g-C3N4-based photocatalysts for atmospheric protection. Finally, both the challenges and opportunities for the development of g-C3N4-based photocatalysts are highlighted. It is highly believed that this special review will provide new insight into the synthesis, modification, and broadening of g-C3N4-based photocatalysts for atmospheric protection.

Cocreation of photogenerated electron and hole collectors on polymeric carbon nitride synergistically promotes carrier separation and reaction kinetics towards propelling photocatalytic hydrogen evolution

It is a challenging issue for the creation of photogenerated carrier collectors on the photocatalyst to drive charge separation and promote reaction kinetics in the photocatalytic reaction. Herein, based on one-step dual-modulation strategy, IrO2 nanodots are modified at the edge of polymeric carbon nitride (PCN) nanosheets and atomically dispersed Ir atoms are implanted in the skeleton of PCN to obtain a unique Ir-PCN/IrO2 photocatalyst. IrO2 nanodots and atomically dispersed Ir atoms act as hole and electron collectors to synergistically promote the carrier separation and reaction kinetics, respectively, thereby greatly improving the photocatalytic hydrogen evolution (PHE) performance. As a result, without adding additional cocatalyst, the PHE rate over the optimal Ir-PCN/IrO2-2% sample reaches up to 1564.4 μmol h-1 g-1 under the visible light irradiation, with achieving an apparent quantum yield (AQY) of 15.7% at 420 nm.

Matched Redox Kinetics on Triazine-Based Carbon Nitride/Ni(OH)2 for Stoichiometric Overall Photocatalytic CO2 Conversion

Mismatched reaction kinetics of CO2 reduction and H2O oxidation is the main obstacle limiting the overall photocatalytic CO2 conversion. Here, a molten salt strategy is used to construct tubular triazine-based carbon nitride (TCN) with more adsorption sites and stronger activation capability. Ni(OH)2 nanosheets are then grown over the TCN to trigger a proton-coupled electron transfer for a stoichiometric overall photocatalytic CO2 conversion via "3CO2 + 2H2O = CH4 + 2CO + 3O2." TCN reduces the energy barrier of H2O dissociation to promote H2O oxidation to O2 and supply sufficient protons to Ni(OH)2, whereby the CO2 conversion is accelerated due to the enhanced proton-coupled electron transfer process enabled by the sufficient proton supply from TCN. This work highlights the importance of matching the reaction kinetics of CO2 reduction and H2O oxidation by proton-coupled electron transfer on stoichiometric overall photocatalytic CO2 conversion.

In-situ one-step construction of poly(heptazine imide)/poly(triazine imide) heterojunctions for photocatalytic hydrogen evolution

The construction of heterojunctions is challenging, requiring atomic-level contact and interface matching. Here, we have achieved atomic-level interfacial matching by constructing poly(heptazine imide)/poly(triazine imide) crystalline carbon nitride heterojunctions in an in-situ one-step method. The content of poly(triazine imide) in heterojunctions is positively related to the proportion of lithium chloride in potassium chloride and lithium chloride mixed-salts. The optimized heterojunction achieves an apparent quantum efficiency of 48.34 % for photocatalytic hydrogen production at 420 nm, which is at a good level in polymeric carbon nitride photocatalysts. The proposed ion-thermal assisted heterojunction construction strategy contributes to the development of polymeric carbon nitride photocatalysts with high crystallization and high charge separation efficiency.

Metal Poly(heptazine imides) as Multifunctional Photocatalysts for Solar Fuel Production

Solar-driven photocatalysis employing particulate semiconductors represents a promising approach for sustainable production of valuable chemical feedstock. Metal poly(heptazine imide) (MPHI), a novel 2D ionic carbon nitride, has been recognized as an emerging photocatalyst with distinctive properties. In this minireview, we first delineate the forefront innovations of MPHI photocatalysts, spanning from synthetic strategies and solving structures to the exploration of novel properties. We place special emphasis on the structural design principles aimed at developing high-performance MPHI systems toward photocatalytic solar fuel production such as H2 evolution, H2O oxidation, H2O2 production and CO2 reduction. Finally, we discuss crucial insights and challenges in leveraging highly active MPHIs for efficient solar-to-chemical energy conversion.

S-scheme heterojunction of crystalline carbon nitride nanosheets and ultrafine WO3 nanoparticles for photocatalytic CO2 reduction

Highly crystalline carbon nitride polymers have shown great opportunities in overall water photosplitting; however, their mission in light-driven CO2 conversion remains to be explored. In this work, crystalline carbon nitride (CCN) nanosheets of poly triazine imide (PTI) embedded with melon domains are fabricated by KCl/LiCl-mediated polycondensation of dicyandiamide, the surface of which is subsequently deposited with ultrafine WO3 nanoparticles to construct the CCN/WO3 heterostructure with a S-scheme interface. Systematic characterizations have been conducted to reveal the compositions and structures of the S-scheme CCN/WO3 hybrid, featuring strengthened optical capture, enhanced CO2 adsorption and activation, attractive textural properties, as well as spatial separation and directed movement of light-triggered charge carriers. Under mild conditions, the CCN/WO3 catalyst with optimized composition displays a high photocatalytic activity for reducing CO2 to CO in a rate of 23.0 µmol/hr (i.e., 2300 µmol/(hr·g)), which is about 7-fold that of pristine CCN, along with a high CO selectivity of 90.6% against H2 formation. Moreover, it also manifests high stability and fine reusability for the CO2 conversion reaction. The CO2 adsorption and conversion processes on the catalyst are monitored by in-situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), identifying the crucial intermediates of CO2*-, COOH* and CO*, which integrated with the results of performance evaluation proposes the possible CO2 reduction mechanism.

Achieving Long-Lived Charge Separated State through Ultrafast Interfacial Hole Transfer in Redox Sites-Isolated CdS Nanorods for Enhanced Photocatalysis

As opposed to natural photosynthesis, a significant challenge in a semiconductor-based photocatalyst is the limited hole extraction efficiency, which adversely affects solar-to-fuel efficiency. Recent studies have demonstrated that photocatalysts featuring spatially isolated dual catalytic oxidation/reduction sites can yield enhanced hole extraction efficiencies. However, the decay dynamics of excited states in such photocatalysts have not been explored. Here a ternary barbell-shaped CdS/MoS2/Cu2S heterostructure is prepared, comprising CdS nanorods (NRs) interfaced with MoS2 nanosheets at both ends and Cu2S nanoparticles on the sidewall. By using transient absorption (TA) spectra, highly efficient charge separation within the CdS/MoS2/Cu2S heterostructure are identified. This is achieved through directed electron transfer to the MoS2 tips at a rate constant of >8.3 × 109 s-1 and rapid hole transfer to the Cu2S nanoparticles on the sidewall at a rate of >6.1 × 1010 s-1, leading to an exceptional overall charge transfer constant of 2.3 × 1011 s-1 in CdS/MoS2/Cu2S. The enhanced hole transfer efficiency results in a remarkably prolonged charge-separated state, facilitating efficient electron accumulation within the MoS2 tips. Consequently, the ternary CdS/MoS2/Cu2S heterostructure demonstrates a 22-fold enhancement in visible-light-driven H2 generation compare to pure CdS nanorods. This work highlights the significance of efficient hole extraction in enhancing the solar-to-H2 performance of semiconductor-based heterostructure.

Chloride Ion-Induced Spatial Separation and Long Recombination Time of Photogenerated Electrons and Holes in Crystalline Carbon Nitride

Poly(triazine imide)·Li+Cl- (PTI/Li+Cl-) as one of the most reported crystalline carbon nitrides has shown exciting potential for photocatalysis. However, understanding the role of Li+/Cl- in the photoexcited charge transfer in the time and space of PTI is a challenging problem. Here, we have investigated the nonradiative charge recombination of series ion intercalated PTI systems (PTI/Li+X-, where X = F, Cl, Br, and I) by performing the ab initio nonadiabatic molecular dynamics simulations. The results indicate that the intercalated anions in PTI/Li+Cl- and PTI/Li+Br- have the potential to trap holes, separate the electrons and holes, and prolong the nonradiative electron-hole recombination. In particular, ∼70% of holes in PTI/Li+Cl- can transport among interlayers toward the {0001} planes, while most of the electrons are transferred to the {101̅0} planes, exhibiting different transport pathways and directions. Furthermore, PTI/Li+Cl- has an electron-hole recombination time as long as 136 ns, which explains its excellent optoelectronic properties. This work provides a theoretical baseline for the reported facet engineering improvement of crystalline carbon nitride for overall water splitting.

Bi-directional charge transfer channels in highly crystalline carbon nitride enabling superior photocatalytic hydrogen evolution

Introducing a donor-acceptor (D-A) unit is an effective approach to facilitate charge transfer in polymeric carbon nitride (PCN) and enhance photocatalytic performance. However, the introduction of hetero-molecules can lead to a decrease in crystallinity, limiting interlayer charge transfer and inhibiting further improvement. In this study, we constructed a novel D-A type carbon nitride with significantly higher crystallinity and a bi-directional charge transfer channel, which was achieved through 2,5-thiophenedicarboxylic acid (2,5-TDCA)-assisted self-assembly followed by KCl-templated calcination. The thiophene and cyano groups introduced serve as the electron donor and acceptor, respectively, enhancing in-plane electron delocalization. Additionally, introduced potassium ions are intercalated among the adjacent layers of carbon nitride, creating an interlayer charge transfer channel. Moreover, the highly ordered structure and improved crystallinity further facilitate charge transfer. As a result, the as-prepared photocatalyst exhibits superior photocatalytic hydrogen evolution (PHE) activity of 7.449 mmol h-1 g-1, which is 6.03 times higher than that of pure carbon nitride. The strategy of developing crystalline D-A-structured carbon nitride with controlled in-plane and interlayer charge transfer opens new avenues for the design of carbon nitride with enhanced properties for PHE.

Developing Polymeric Carbon Nitrides for Photocatalytic H2O2 Production

Hydrogen peroxide (H2O2) plays a crucial role in various applications, such as green oxidation processes and the production of high-quality fuels. Currently, H2O2 is primarily manufactured using the indirect anthraquinone method, known for its significant energy consumption and the generation of intensive by-products. Extensive research has been conducted on the photocatalytic production of H2O2 via oxygen reduction reaction (ORR), with polymeric carbon nitride (PCN) emerging as a promising catalyst for this conversion. This review article is organized around two approaches. The first part main consists of the chemical optimization of the PCN structure, while the second focuses on the physical integration of PCN with other functional materials. The objective is to clarify the correlation between the physicochemical properties of PCN photocatalysts and their effectiveness in H2O2 production. Through a thorough review and analysis of the findings, this article seeks to stimulate new insights and achievements, not only in the domain of H2O2 production via ORR but also in other redox reactions.

Solvated Electrons Generated on the Surface of Na-SPHI for Boosting Visible Light Photocatalytic Hydrogen Evolution with Ultra-High AQE

Enhancing the utilization of visible-light-active semiconductors with an excellent apparent quantum efficiency (AQE) remains a significant and challenging goal in the realm of photocatalytic water splitting. In this study, a fully condensed sulfur-doped poly(heptazine imide) metalized with Na (Na-SPHI) is synthesized by an ionothermal method by using eutectic NaCl/LiCl mixture as the ionic solvent. Comprehensive characterizations of the obtained Na-SPHI reveal several advantageous features, including heightened light absorption, facilitated exciton dissociation, and expedited charge transfer. More importantly, solvated electron, powerful reducing agents, can be generated on the surface of Na-SPHI upon irradiation with visible light. Benefiting from above advantage, the Na-SPHI exhibits an excellent H2 evolution rate of 571.8 µmol·h-1 under visible light illumination and a super-high AQE of 61.7% at 420 nm. This research emphasizes the significance of the solvated electron on the surface of photocatalyst in overcoming the challenges associated with visible light-driven photocatalysis, showcasing its potential application in photocatalytic water splitting.

Defect-Repaired g-C3N4 Nanosheets: Elevating the Efficacy of Sonodynamic Cancer Therapy Through Enhanced Charge Carrier Migration

Sonodynamic therapy (SDT) has garnered growing interest owing to its high tissue penetration depth and minimal side effects. However, the lack of efficient sonosensitizers remains the primary limiting factor for the clinical application of this treatment method. Here, defect-repaired graphene phase carbon nitride (g-C3N4) nanosheets are prepared and utilized for enhanced SDT in anti-tumor treatment. After defect engineering optimization, the bulk defects of g-C3N4 are significantly reduced, resulting in higher crystallinity and exhibiting a polyheptazine imide (PHI) structure. Due to the more extended conjugated structure of PHI, facilitating faster charge transfer on the surface, it exhibits superior SDT performance for inducing apoptosis in tumor cells. This work focuses on introducing a novel carbon nitride nanomaterial as a sonosensitizer and a strategy for optimizing sonosensitizer performance by reducing bulk defects.

Tailored Exfoliation of Polymeric Carbon Nitride for Photocatalytic H2O2 Production and CH4 Valorization Mediated by O2 Activation

The exfoliation of bulk C3N4 (BCN) into ultrathin layered structure is an effective strategy to boost photocatalytic efficiency by exposing interior active sites and accelerating charge separation and transportation. Herein, we report a novel nitrate anion intercalation-decomposition (NID) strategy that is effective in peeling off BCN into few-layer C3N4 (fl-CN) with tailored thickness down to bi-layer. This strategy only involves hydrothermal treatment of BCN in diluted HNO3 aqueous solution, followed by pyrolysis at various temperatures. The decomposition of the nitrate anions not only exfoliates BCN and changes the band structure, but also incorporates oxygen species onto fl-CN, which is conducive to O2 adsorption and hence relevant chemical processes. In photocatalytic O2 reduction under visible light irradiation, the H2O2 production rate over the optimal fl-CN-530 catalyst is 952 μmol g-1 h-1, which is 8.8 times that over BCN. More importantly, under full arc irradiation and in the absence of hole scavenger, CH4 can be photocatalytically oxidized by on-site formed H2O2 and active oxygen species to generate value-added C1 oxygenates with high selectivity of 99.2 % and record-high production rate of 1893 μmol g-1 h-1 among the metal-free C3N4-based photocatalysts.

Progress on enhancing the charge separation efficiency of carbon nitride for robust photocatalytic H2 production

Solar-driven H2 production from water splitting with efficient photocatalysts is a sustainable strategy to meet the clean energy demand and alleviate the approaching environmental issues caused by fossil fuel consumption. Among various semiconductor-based photocatalysts, graphitic carbon nitride (g-C3N4) has attracted much attention due to its advantages of long term-stability, visible light response, low cost, and easy preparation. However, the intrinsic Coulombic attraction between charge carriers and the interlayer electrostatic barrier of bulk g-C3N4 result in severe charge recombination and low charge separation efficiency. This perspective summarizes the recent progress in the development of g-C3N4 photocatalytic systems, and focuses on three main modification strategies for promoting charge transfer and minimizing charge recombination, including structural modulation, heterojunction construction, and cocatalyst loading. Based on this progress, we provide conclusions regarding the current challenges of further improving photocatalytic efficiency to fulfill commercial requirements, and propose some recommendations for the design of novel and satisfactory g-C3N4 photocatalysts, which is expected to progress the solar-to-hydrogen conversion.

Reduction of Superoxide Radical Intermediate by Polydopamine for Efficient Hydrogen Peroxide Photosynthesis

The synthesis of hydrogen peroxide through artificial photosynthesis is a green and promising technology with advantages in sustainability, economy and safety. However, superoxide radical (⋅O2 -), an important intermediate in photocatalytic oxygen reduction to H2O2 production, has strong oxidizing properties that potentially destabilize the catalyst. Therefore, avoiding the accumulation of ⋅O2 - for its rapid conversion to H2O2 is of paramount significance in improving catalyst stability and H2O2 yield. In this work, a strategy was developed to utilize protonated groups for the rapid depletion of converted ⋅O2 -, thereby the efficiency of photocatalytic synthesis of H2O2 from CN was successfully enhanced by 47-fold. The experimental findings demonstrated that polydopamine not only improved carrier separation efficiency, and more importantly, provided the adsorption reduction active site for ⋅O2 - for efficient H2O2 production. This work offers a versatile approach for synthesizing efficient and stable photocatalysts.

Triple-Phase Photocatalytic H2O2 Production on a Janus Fiber Membrane with Asymmetric Hydrophobicity

Photocatalytic O2 reduction is an intriguing approach to producing H2O2, but its efficiency is often hindered by the limited solubility and mass transfer of O2 in the aqueous phase. Here, we design and fabricate a two-layered (2L) Janus fiber membrane photocatalyst with asymmetric hydrophobicity for efficient photocatalytic H2O2 production. The top layer of the membrane consists of superhydrophobic polytetrafluoroethylene (PTFE) fibers with a dispersed modified carbon nitride (mCN) photocatalyst. Amphiphilic Nafion (Naf) ionomer is sprayed onto this layer to modulate the microenvironment and achieve moderate hydrophobicity. In contrast, the bottom layer consists of bare PTFE fibers with high hydrophobicity. The elaborate structural configuration and asymmetric hydrophobicity feature of the optimized membrane photocatalyst (designated as 2L-mCN/F-Naf; F, PTFE) allow most mCN to be exposed with gas-liquid-solid triple-phase interfaces and enable rapid mass transfer of gaseous O2 within the hierarchical membrane, thus increasing the local O2 concentration near the mCN photocatalyst. As a result, the optimized 2L-mCN/F-Naf membrane photocatalyst shows remarkable photocatalytic H2O2 production activity, achieving a rate of 5.38 mmol g-1 h-1 under visible light irradiation.

Low-Temperature Synthesis of Cyano-Rich Modified Surface-Alkalinized Heterojunctions with Directional Charge Transfer for Photocatalytic In Situ Generation and Consumption of Peroxides

The synthesis of low-temperature poly(heptazine imide) (PHI) presents a significant challenge. In this context, we have developed a novel low-temperature synthesis strategy for PHI in this work. This strategy involves the introduction of Na+ ions, which etch and disrupt the conjugated structure of carbon nitride (CN) during assisted thermal condensation. This disruption leads to the partial decomposition of the heptazine ring structure, resulting in the formation of C≡N functionalities on the CN surface, which are enriched with hydroxyl groups and undergo cyano modification. The formation of heterojunctions between CN and ZnO, which facilitate charge transfer along an immobilization pathway, accelerated charge transfer processes and improved reactant adsorption as well as electron utilization efficiency. The resulting catalyst was employed for the room temperature, atmospheric pressure, and solvent-free photocatalytic selective oxidation of cumene (CM), achieving a cumene conversion rate of 28.7% and a remarkable selectivity of 92.0% toward the desired product, cumene hydroperoxide (CHP). Furthermore, this CHP induced oxidative reactions, as demonstrated by the successful oxidation of benzylamine to imine and the oxidation of sulfide to sulfoxide, both yielding high product yields. Additionally, the utilization of a continuous-flow device significantly reduces the reaction time required for these oxidation processes. This work not only introduces an innovative approach to environmentally friendly, sustainable, clean, and efficient PHI synthesis but also underscores the promising potential and advantages of carbon nitride-based photocatalysts in the realm of sustainable and green organic transformations.

Controlled crystal facet of tungsten trioxide photoanode to improve on-demand hydrogen peroxide production for in-situ tetracycline degradation

Advanced oxidation processes utilizing hydrogen peroxide (H2O2) are widely employed for the treatment of organic pollutions. However, the conventional anthraquinone method for H2O2 synthesis is unsuitable for this application owing to its hazardous and costly nature. Alternative approaches involve a photoelectrochemical method. Herein, tungsten trioxide (WO3) photoanode has been used for the conversion of H2O into H2O2 through oxidation reaction from a PEC system, simultaneously utilizing in-situ generated hydroxyl (OH•) radicals for tetracycline degradation. By manipulating the ratio of crystal facets between (020) and (200) of the WO3 photoanode, a significant improvement in H2O2 production has been achieved by increasing the proportion of (020) facet. The production rate of WO3 photoanode enriched with the (020) facet is approximately 1.9 times higher than that enriched with (200) facet. This enhanced H2O2 production performance can be attributed to the improved formation of OH• radicals and the accelerated desorption of H2O2 on the (020) facet. Simultaneously, the in-situ generated OH• radicals are applied for tetracycline degradation. Under illumination of sunlight stimulator for 180 min, the optimal photoanode achieves a degradation rate of 86.7% for tetracycline. Furthermore, the resulting chemicals have been analyzed, revealing that C8H10O and C7H8O were formed as the primary products. Notably, these products exhibit significantly lower toxicity compared to tetracycline. This study presents a promising approach for the rational design of WO3 based photoanodes for oxidation reaction, including not only H2O2 production but also the efficient degradation of organic pollutants.

Understanding the Poly (Triazine Imide) Crystals Formation Process: The Conversion from Heptazine to Triazine

Poly (triazine imide) (PTI) generally obtained via ionothermal synthesis features extended π-conjugation and enhanced crystallinity. However, in-depth investigation of the polycondensation process for PTI is an onerous task due to multiple influencing factors and limited characterization techniques. Herein, to simplify the polymerization route and exclude non-essential factors, PTI was prepared by calcining only melamine and LiCl. This study aims to identify the pivotal role of LiCl in PTI formation, which can convert heptazine-based intermediates into more stable triazine-based PTI framework. Based on this discovery, we demonstrate the transformation process of the prepared samples from amorphous Bulk g-C3 N4 to regular PTI, and further prove that the reaction with LiCl causes disruption of heptazine covalent organic frameworks. Additionally, the PTI exhibits higher photocatalytic water splitting performance due to efficient charge carrier mobility and separation, as well as faster reaction kinetics. This discovery deepens understanding of the polycondensation process of PTI crystals and provides insights toward the rational design of crystalline carbon nitride-based semiconductors.

Ultrathin covalent organic framework nanosheets for enhanced photocatalytic water oxidation

Photocatalytic water oxidation is a key half-reaction for various solar-to-fuel conversion systems but requires simultaneous water affinity and hole accumulation at the photocatalytic site. Here, we present the rational design and synthesis of an ionic-type covalent organic framework (COF) named tetraphenylporphyrin cobalt and cobalt bipyridine complex (CoTPP-CoBpy3) COF, combining cobalt porphyrin and cobalt bipyridine building blocks as a photocatalyst for water oxidation. The good dispersibility of porous large-size (>2 micrometers) COF nanosheets (≈1.45 nanometers) facilitates local water collection; the ultrafast triplet-state charge transfer (1.8 picoseconds) and prolonged charge separation (1.2 nanoseconds) further contribute to the efficient accumulation of holes in the CoTPP moiety, leading to a photocatalytic dioxygen production rate of 7323 micromoles per gram per hour. Moreover, we have identified an end-on superoxide radical (O2·) intermediate at the active site of the CoTPP moiety and proposed an electron-intermediate cascade mechanism that elucidates the synergistic coupling of electron relay (S1-T1-T1') and intermediate evolution during the photocatalytic process.

Organic Molecule Bifunctionalized Polymeric Carbon Nitride for Enhanced Photocatalytic Hydrogen Peroxide Production

Modifying the polymeric carbon nitride (CN) with organic molecules is a promising strategy to enhance the photocatalytic activity. However, most previously reported works show that interchain embedding and edge grafting of the organic molecule can hardly be achieved simultaneously. Herein, we successfully synthesized organic molecule bifunctionalized CN (MBCN) through copolymerization of melon and sulfanilamide at a purposely elevated temperature of 550 °C. In MBCN, the edge grafted and interchain embedded benzene rings act as the electron-donating group and charge-transfer channel, respectively, rendering efficient photocatalytic H2 O2 production. The optimal MBCN exhibits a significantly improved non-sacrificial photocatalytic H2 O2 generation rate (54.0 μmol g-1  h-1 ) from pure water, which is 10.4 times that of pristine CN. Experimental and density functional theory (DFT) calculation results reveal that the enhanced H2 O2 production activity of MBCN is mainly attributed to the improved photogenerated charge separation/transfer and decreased formation energy barrier (▵G) from O2- to the intermediate 1,4-endoperoxide (⋅OOH). This work suggests that simultaneous formation of electron donating group and charge transfer channel via organic molecule bifunctionalization is a feasible strategy for boosting the photocatalytic activity of CN.

Bottom-up Synthesis of Single-Crystalline Poly (Triazine Imide) Nanosheets for Photocatalytic Overall Water Splitting

Poly (triazine imide) (PTI/Li+ Cl- ), one of the crystalline versions of polymeric carbon nitrides, holds great promise for photocatalytic overall water splitting. In principle, the photocatalytic activity of PTI/Li+ Cl- is closely related to the morphology, which could be reasonably tailored by the modulation of the polycondensation process. Herein, we demonstrate that the hexagonal prisms of PTI/Li+ Cl- could be converted to hexagonal nanosheets by adjusting the binary eutectic salts from LiCl/KCl or NaCl/LiCl to ternary LiCl/KCl/NaCl. Results reveal that the extension of in-plane conjugation is preferred, when the polymerisation was performed in the presence of ternary eutectic salts. The hexagonal nanosheets bears longer lifetimes of charge carriers than that of hexagonal prisms due to lower intensity of structure defects and shorter hopping distance of charge carriers along the stacking direction of triazine nanosheets. The optimized hexagonal nanosheets exhibits a record apparent quantum yield value of 25 % (λ=365 nm) for solar hydrogen production by one-step excitation overall water splitting.

Rh/Cr2 O3 and CoOx Cocatalysts for Efficient Photocatalytic Water Splitting by Poly (Triazine Imide) Crystals

In situ photo-deposition of both Pt and CoOx cocatalysts on the facets of poly (triazine imide) (PTI) crystals has been developed for photocatalytic overall water splitting. However, the undesired backward reaction (i.e., water formation) on the noble Pt surface is a spontaneously down-hill process, which restricts their efficiency to run the overall water splitting reaction. Herein, we demonstrate that the efficiency for photocatalytic overall water splitting could be largely promoted by the decoration of Rh/Cr2 O3 and CoOx as H2 and O2 evolution cocatalysts, respectively. Results reveal that the dual cocatalysts greatly extract charges from bulk to surface, while the Rh/Cr2 O3 cocatalyst dramatically restrains the backward reaction, achieving an apparent quantum efficiency (AQE) of 20.2 % for the photocatalytic overall water splitting reaction.

Engineering graphitic carbon nitride for next-generation photodetectors: a mini review

Semiconductor photodetectors, as photoelectric devices using optical-electrical signal conversion for detection, are widely used in various fields such as optical communication, medical imaging, environmental monitoring, military tracking, remote sensing, etc. Compared to the conventional photodetector materials including silicon, III-V semiconductors and metal sulfides, graphitic carbon nitride (g-C3N4) as a metal-free polymeric semiconductor, has many advantages such as low-price, easy preparation, efficient visible light response, and relatively good thermal stability. In the meantime, the polymer characteristics also endow the g-C3N4 with good mechanical properties. Apart from being used for photo(electro)catalysts during the past decades, the potential use of g-C3N4 in photodetectors has attracted great research interests very recently. In this review, we first briefly introduce the structure and properties of g-C3N4 and the key performance parameters of photodetectors. Then, combining the very recent progress, the review focuses on the active materials, fabrication methods and performance enhancement strategies for g-C3N4 based photodetectors. The existing challenges are discussed and the future development of g-C3N4 based photodetectors is also forecasted.

Metal-Free 2D/2D van der Waals Heterojunction Based on Covalent Organic Frameworks for Highly Efficient Solar Energy Catalysis

Covalent organic frameworks (COFs) have emerged as a kind of rising star materials in photocatalysis. However, their photocatalytic activities are restricted by the high photogenerated electron-hole pairs recombination rate. Herein, a novel metal-free 2D/2D van der Waals heterojunction, composed of a two-dimensional (2D) COF with ketoenamine linkage (TpPa-1-COF) and 2D defective hexagonal boron nitride (h-BN), is successfully constructed through in situ solvothermal method. Benefitting from the presence of VDW heterojunction, larger contact area and intimate electronic coupling can be formed between the interface of TpPa-1-COF and defective h-BN, which make contributions to promoting charge carriers separation. The introduced defects can also endow the h-BN with porous structure, thus providing more reactive sites. Moreover, the TpPa-1-COF will undergo a structural transformation after being integrated with defective h-BN, which can enlarge the gap between the conduction band position of the h-BN and TpPa-1-COF, and suppress electron backflow, corroborated by experimental and density functional theory calculations results. Accordingly, the resulting porous h-BN/TpPa-1-COF metal-free VDW heterojunction displays outstanding solar energy catalytic activity for water splitting without co-catalysts, and the H2 evolution rate can reach up to 3.15 mmol g-1 h-1, which is about 67 times greater than that of pristine TpPa-1-COF, also surpassing that of state-of-the-art metal-free-based photocatalysts reported to date. In particular, it is the first work for constructing COFs-based heterojunctions with the help of h-BN, which may provide new avenue for designing highly efficient metal-free-based photocatalysts for H2 evolution.

The Directional Crystallization Process of Poly (triazine imide) Single Crystals in Molten Salts

Poly (triazine imide) photocatalysts prepared via molten salt methods emerge as promising polymer semiconductors with one-step excitation capacity of overall water splitting. Unveiling the molecular conjugation, nucleation, and crystallization processes of PTI crystals is crucial for their controllable structure design. Herein, microscopy characterization was conducted at the PTI crystallization front from meso to nano scales. The heptazine-based precursor was found to depolymerize to triazine monomers within molten salts and KCl cubes precipitate as the leading cores that guide the directional stacking of PTI molecular units to form aggregated crystals. Upon this discovery, PTI crystals with improved dispersibility and enhanced photocatalytic performance were obtained by tailoring the crystallization fronts. This study advances insights into the directional assembling of PTI monomers on salt templates, placing a theoretical foundation for the ordered condensation of polymer crystals.

Nanoarchitecture Manipulation by Polycondensation on KCl Crystals toward Crystalline Lamellar Carbon Nitride for Efficient H2O2 Photoproduction

A lamellar carbon nitride (CN) framework is one of the most promising materials for solar-driven hydrogen peroxide production. The low dielectric constant of the organic CN framework leads to severe recombination of the excitons, and the photon-to-chemical conversion efficiency is thus unsatisfactory. In this work, by polycondensation of the small molecules on the KCl crystal surface, K⁺-incorporated crystalline CN (CNK) frameworks show significantly extended periodicity of the stacking layers and in-plane orderly organized heptazine/triazine units. The crystalline CNK frameworks exhibit a series of favorable photophysical properties, such as enhanced photon absorption, negatively shifted LUMO potentials, and attenuated emissive decay of the excitons. The CNK frameworks thus present remarkable performance in the photocatalytic selective oxygen reduction reaction for hydrogen peroxide production, e.g., CNK framework from the polycondensation of NH₄SCN on the KCl surface could produce hydrogen peroxide at a remarkable reaction rate of 26.7 mmol h^-1 g^-1 with a high apparent quantum yield of 25.0%, which is 23.5 times that on its counterpart synthesized in the absence of KCl. This method is generally applicable to all of the precursors for CN synthesis.

Two-Dimensional Ultrathin Graphic Carbon Nitrides with Extended π-Conjugation as Extraordinary Efficient Hydrogen Evolution Photocatalyst

Construction of 2D graphic carbon nitrides (g-CN_x ) with wide visible light adsorption range and high charge separation efficiency concurrently is of great urgent demand and still very challenging for developing highly efficient photocatalysts for hydrogen evolution. To achieve this goal, a two-step pyrolytic strategy has been applied here to create ultrathin 2D g-CN_x with extended the π-conjugation. It is experimentally proven that the extension of π-conjugation in g-CN_x is not only beneficial to narrowing the bandgap, but also improving the charge separation efficiency of the g-CN_x . As an integral result, extraordinary apparent quantum efficiencies (AQEs) of 57.3% and 7.0% at short (380 nm) and long (520 nm) wavelength, respectively, are achieved. The formation process of the extended π-conjugated structures in the ultrathin 2D g-CN_x has been investigated using XRD, FT-IR, Raman, XPS, and EPR. Additionally, it has been illustrated that the two-step pyrolytic strategy is critical for creating ultrathin g-CN_x nanosheets with extended π-conjugation by control experiments. This work shows a feasible and effective strategy to simultaneously expand the light adsorption range, enhance charge carrier mobility and depress electron-hole recombination of g-CN_x for high-efficient photocatalytic hydrogen evolution.

Structure-Property Relationship of Cyano-Functionalized Conjugated Polymers for Photocatalytic Hydrogen Production

Conjugated polymers (CPs) have garnered increasing attention in the field of photocatalysis due to their stability and molecular tunability. Understanding the structure-property relationship in CPs and addressing appropriate molecular design strategies are pivotal to improving the photocatalytic performance of CPs. Herein, a new efficient cyano (CN) engineering approach was proposed to promote the photocatalytic performance of CPs, and three representative CP-based photocatalysts with different CN contents were tailor-made to investigate the relationship between CN functionalization and photocatalytic activity. A series of systematically experimental and theoretical studies reveal that CN functionalization contributes to strengthening the donor-acceptor (D-A) interaction, enhancing the light absorption ability, charge separation/transfer efficiency, and hydrophilicity of CPs, and also facilitating the output of separated photoinduced electrons from CPs to Pt cocatalyst. Thus, the dicyano-functionalized polymer (P-2CN) manifests an attractive photocatalytic performance in hydrogen production. This study provides a facile strategy to develop excellent CP-based photocatalysts for solar fuel production.

Surface Coating of Amorphous TiOx Enables Efficient Vapor-fed Photocatalytic Overall Water Splitting with Substantial Apparent Quantum Yield

Photocatalytic overall water splitting represents a promising strategy for sustainable hydrogen production. However, photocorrosion and dissolution of photocatalysts and cocatalysts are common concern for the solid-liquid phase reaction. Recently, the above issues could be addressed by Domen and coworkers, when the photocatalytic water splitting was conducted in the presence of water vapor, which dramatically restrain the undesired corrosion of the photocatalysts and cocatalysts. Besides, surface decoration of hygroscopic TiO_x layer promotes adsorption of water molecules and prevents the corrosion process. In addition, vapor-fed photocatalytic water splitting remains considerable apparent quantum yield compared with the liquid water photocatalytic overall water splitting at pressurized condition, which endows great potential in practical application.

Heptazine-Based Ordered-Distorted Copolymers with Enhanced Visible-Light Absorption for Photocatalytic Hydrogen Production

Poly(heptazine imide) (PHI), one of the attractive allotropes of polymeric carbon nitride, has recently received extensive attention in photocatalysis due to its extended conjugation for fast separation and transfer of the charges. However, pristine PHI bears an intrinsic optical absorption band edge at 460 nm, which largely restrains the visible light utilization. Herein, the narrow-bandgap PHI (N-PHI) with an ordered-distorted interface was fabricated from polycondensation of the mixture of NaSCN, cyanuric chloride, and LiCl. Results revealed that the enhanced optical absorption and the promoted separation and transfer of the charge carriers at the interface greatly improved the photocatalytic performance, which endowed N-PHI with an apparent quantum yield of 20 % for hydrogen production at 450 nm.

Facile Chemical Vapor Modification Strategy to Construct Surface Cyano-Rich Polymer Carbon Nitrides for Highly Efficient Photocatalytic H2 Evolution

The surface grafting of electro-negative cyano groups on polymer carbon nitrides (PCNs) is an effective way to tail their electronic structure. Despite the significant progress in the synthesis of cyano group-enriched PCN, developing a simple and efficient method remains challenging. Here, a facile strategy was developed for fabricating surface cyano-rich PCN (PCN-DM) with a porous structure via chemical vapor modification using diaminomaleonitrile. The cyano groups of diaminomaleonitrile substituted the amino groups on PCN surface via a deamination. The hydrogen production rate of the PCN-DM was approximately 17 times higher than that of pristine PCN. This significant increase in photocatalytic performance could be assigned to the fusion of cyano groups in the surface of PCN, forming new gap states that broadened the visible-light harvesting and accelerated charge separation for photoredox reactions. This study unveils a promising approach for incorporating functional units in the design of novel photocatalysts for efficient hydrogen production.

Synergistic Effect between CO2 Chemisorption Using Amino-Modified Carbon Nitride and Epoxide Activation by High-Energy Electrons for Plasmon-Assisted Synthesis of Cyclic Carbonates

Photocatalytic CO₂ cycloaddition is a promising approach for CO₂ value-added processes. However, the efficiency of plasmon-assisted CO₂ cycloaddition still needs to be improved and the reaction mechanism is unclear. Herein, g-C₃N₄/Ag (ACN-Ag) hybrids exhibited superior activity of CO₂ cycloaddition by coupling a semiconductor into the plasmonic system, in which the ACN grafting amino group by the formation of carbon vacancies can enhance CO₂ chemisorption; meanwhile, photo-generated electrons from ACN transfer to Ag to form high-energy electrons, which can activate propylene oxide, accelerating the ring-opening step. Importantly, photo-generated electron injection from ACN to Ag and the interaction between Ag nanoparticles and ACN were confirmed by single-particle photoluminescence spectroscopy. The wavelength-dependent activity demonstrated that the plasmon excitation is crucial for the reaction. Moreover, in situ single-particle PL quenching caused by propylene oxide and in situ electron paramagnetic resonance verified the activation of propylene oxide by ACN-Ag. This work is conducive to an in-depth understanding of the mechanism of CO₂ cycloaddition at the single-particle level and provides guidance for the organic synthesis.

Extended Conjugation Tuning Carbon Nitride for Non-sacrificial H2 O2 Photosynthesis and Hypoxic Tumor Therapy

Artificial photocatalysis offers a clean approach for producing H₂ O₂ . However, the poor selectivity and activity of H₂ O₂ production hamper traditional industrial applications and emerging photodynamic therapy (PDT)/chemodynamic therapy (CDT). Herein, we report a C₅ N₂ photocatalyst with a conjugated C=N linkage for selective and efficient non-sacrificial H₂ O₂ production in both normoxic and hypoxic systems. The strengthened delocalization of π-electrons by linkers in C₅ N₂ downshifted the band position, thermodynamically eliminating side H₂ evolution reaction and kinetically promoting water oxidation. As a result, C₅ N₂ had a competitive solar-to-chemical conversion efficiency of 0.55 % in overall H₂ O₂ production and exhibited by far the highest activity under hypoxic conditions (698 μM h^-1 ). C₅ N₂ was further applied to hypoxic PDT/CDT with outstanding performance in apparent cancer cell death and synchronous bioimaging. The study sheds light on the photosynthesis of H₂ O₂ by carbon nitrides for health applications.

Unblocking Ion-occluded Pore Channels in Poly(triazine imide) Framework for Proton Conduction

Poly(triazine imide) or PTI is an ordered graphitic carbon nitride hosting Å-scale pores attractive for selective molecular transport. AA'-stacked PTI layers are synthesized by ionothermal route during which ions occupy the framework and occlude the pores. Synthesis of ion-free PTI hosting AB-stacked layers has been reported, however, pores in this configuration are blocked by the neighboring layer. The unavailability of open pore limits application of PTI in molecular transport. Herein, we demonstrate acid treatment for ion depletion which maintains AA' stacking and results in open pore structure. We provide first direct evidence of ion-depleted open pores by imaging with the atomic resolution using integrated differential phase-contrast scanning transmission electron microscopy. Depending on the extent of ion-exchange, AA' stacking with open channels and AB stacking with closed channels are obtained and imaged for the first time. The accessibility of open channels is demonstrated by enhanced proton transport through ion depleted PTI.

Optimizing the Optical Absorption of Poly(heptazine imide) by the n → π* Electron Transition for Improved Photocatalytic H2 Evolution

Poly(heptazine imide) (abbreviated as PHI), a heptazine-based crystalline carbon nitride photocatalyst, has attracted widespread attention in the photocatalytic H₂ evolution benefiting from its high crystallinity. Nevertheless, the optical absorption range of the directly synthesized PHI is generally narrow, which severely hinders the utilization of visible light. Much research aimed to extend the optical absorption range of PHI; however, either the optimization degree was insufficient or the synthesis process was cumbersome. Herein, red PHI (RPHI) for improving the photocatalytic H₂ evolution was facilely synthesized by the one step method. The optimal RPHI sample possesses an obvious new absorption band of the n → π* electron transition and exhibits a significantly enhanced photocatalytic H₂ evolution rate of 169 μmol h^-1 (λ > 510 nm) and 46 μmol h^-1 (λ > 600 nm), which is about 5 times (λ > 510 nm) and 7.7 times (λ > 600 nm) that of pristine PHI and surpasses most reported RPHIs. This work may promote the development of the PHI photocatalyst for near-infrared photocatalytic H₂ production.

Constructing porous carbon nitride nanosheets for efficient visible-light-responsive photocatalytic hydrogen evolution

The photocatalytic performance of polymeric carbon nitride (CN) is mainly restricted by the poor mass charge separation efficiency and poor light absorption due to its polymeric nature. The conventional strategies to address these problems involved constructing a nanosheets structure would result in a blue shifted light absorption and increased exciton binding energy. Here, with combination of ammonia etching and selectively hydrogen-bond breaking, holey carbon nitride nanosheets (hCNNS) were constructed, thus widening the light absorption range, and spontaneously shortening the migration distance of electrons and holes in the lateral and vertical directions, respectively. Further analysis also found out the reserved atomic structure order endowed hCNNS with the relatively high redox potential. When irradiated with visible light (λ > 420 nm) and loaded with 3 wt% Pt as the cocatalyst, the hydrogen evolution rate of hCNNS was about 40 times higher than the bulk CN, and the apparent quantum yield (AQY) of hCNNS is 1.47% at 435 ± 15 nm. We expect this research can provide a new sight for achieving highly efficient solar utilization of CN-based photocatalysts.

Covalent Triazine Frameworks and Porous Carbons: Perspective from an Azulene-Based Case

Covalent triazine frameworks (CTFs) are among the most valuable frameworks owing to many fantastic properties. However, molten salt-involved preparation of CTFs at 400-600 °C causes debate on whether CTFs represent organic frameworks or carbon. Herein, new CTFs based on the 1,3-dicyanoazulene monomer (CTF-Azs) are synthesized using molten ZnCl₂ at 400-600 °C. Chemical structure analysis reveals that the CTF-Az prepared at low temperature (400 °C) exhibits polymeric features, whereas those prepared at high temperatures (600 °C) exhibit typical carbon features. Even after being treated at even higher temperatures, the CTF-Azs retain their rich porosity, but the polymeric features vanish. Although structural de-conformation is a widely accepted outcome in polymer-to-carbon rearrangement processes, the study evaluates such processes in the context of CTF systems. A proof-of-concept study is performed, observing that the as-synthesized CTF-Azs exhibit promising performance as cathodes for Li- and K-ion batteries. Moreover, the as-prepared NPCs exhibit excellent catalytic oxygen reduction reaction (ORR) performance; hence, they can be used as air cathodes in Zn-air batteries. This study not only provides new building blocks for novel CTFs with controllable polymer/carbon features but also offers insights into the formation and structure transformation history of CTFs during thermal treatment.

Ionothermal Synthesis of Covalent Triazine Frameworks in a NaCl-KCl-ZnCl2 Eutectic Salt for the Hydrogen Evolution Reaction

Covalent triazine-based frameworks (CTFs) are typically produced by the salt-melt polycondensation of aromatic nitriles in the presence of ZnCl₂ . In this reaction, molten ZnCl₂ salt acts as both a solvent and Lewis acid catalyst. However, when cyclotrimerization takes place at temperatures above 300 °C, undesired carbonization occurs. In this study, an ionothermal synthesis method for CTF-based photocatalysts was developed using a ternary NaCl-KCl-ZnCl₂ eutectic salt (ES) mixture with a melting point of approximately 200 °C. This temperature is lower than the melting point of pure ZnCl₂ (318 °C), thus providing milder salt-melt conditions. These conditions facilitated the polycondensation process, while avoiding carbonization of the polymeric backbone. The resulting CTF-ES₂₀₀ exhibited enhanced optical and electronic properties, and displayed remarkable photocatalytic performance in the hydrogen evolution reaction.