Spin-State Manipulation of Two-Dimensional Metal-Organic Framework with Enhanced Metal-Oxygen Covalency for Lithium-Oxygen Batteries

Asymmetric Coordination Regulating D-Orbital Spin-Electron Filling in Single-Atom Iron Catalyst for Efficient Oxygen Reduction

The single-atom Fe-N-C catalyst has shown great promise for the oxygen reduction reaction (ORR), yet the intrinsic activity is not satisfactory. There is a pressing need to gain a deeper understanding of the charge configuration of the Fe-N-C catalyst and to develop rational modulation strategies. Herein, we have prepared a single-atom Fe catalyst with the co-coordination of N and O (denoted as Fe-N/O-C) and adjacent defect, proposing a strategy to optimize the d-orbital spin-electron filling of Fe sites by fine-tuning the first coordination shell. The Fe-N/O-C exhibits significantly better ORR activity compared to its Fe-N-C counterpart and commercial Pt/C, with a much more positive half-wave potential (0.927 V) and higher kinetic current density. Moreover, using the Fe-N/O-C catalyst, the Zn-air battery and proton exchange membrane fuel cell achieve peak power densities of up to 490 and 1179 mW cm-2, respectively. Theoretical studies and in situ electrochemical Raman spectroscopy reveal that Fe-N/O-C undergoes charge redistribution and negative shifting of the d-band center compared to Fe-N-C, thus optimizing the adsorption free energy of ORR intermediates. This work demonstrates the feasibility of introducing an asymmetric first coordination shell for single-atom catalysts and provides a new optimization direction for their practical application.

Constructing Built-In Electric Field in NiCo2O4-CeO2 Heterostructures to Regulate Li2O2 Formation Routes at High Current Densities

Developing catalysts with suitable adsorption energy for oxygen-containing intermediates and elucidating their internal structure-performance relationships are essential for the commercialization of Li-O2 batteries (LOBs), especially under high current densities. Herein, NiCo2O4-CeO2 heterostructure with a spontaneous built-in electric field (BIEF) is designed and utilized as a cathode catalyst for LOBs at high current density. The driving mechanism of electron pumping/accumulation at heterointerface is studied via experiments and density functional theory (DFT) calculations, elucidating the growth mechanism of discharge products. The results show that BIEF induced by work function difference optimizes the affinity for LiO2 and promotes the formation of nano-flocculent Li2O2, thus improving LOBs performance at high current density. Specifically, NiCo2O4-CeO2 cathode exhibits a large discharge capacity (9546 mAh g-1 at 4000 mA g-1) and high stability (>430 cycles at 4000 mA g-1), which are better than the majority of previously reported metal-based catalysts. This work provides a new method for tuning the nucleation and decomposition of Li2O2 and inspires the design of ideal catalysts for LOBs to operate at high current density.

Porous crystalline conjugated macrocyclic materials and their energy storage applications

Porous crystalline conjugated macrocyclic materials (CMMs) possess high porosity, tunable structure/function and efficient charge transport ability owing to their planar macrocyclic conjugated π-electron system, which make them promising candidates for applications in energy storage. In this review, we thoroughly summarize the timely development of porous crystalline CMMs in energy storage related fields. Specifically, we summarize and discuss their structures and properties. In addition, their energy storage applications, such as lithium ion batteries, lithium sulfur batteries, sodium ion batteries, potassium ion batteries, Li-CO2 batteries, Li-O2 batteries, Zn-air batteries, supercapacitors and triboelectric nanogenerators, are also discussed. Finally, we present the existing challenges and future prospects. We hope this review will inspire the development of advanced energy storage materials based on porous crystalline CMMs.

Catalysis with Two-Dimensional Metal-Organic Frameworks: Synthesis, Characterization, and Modulation

The demand for the exploration of highly active and durable electro/photocatalysts for renewable energy conversion has experienced a significant surge in recent years. Metal-organic frameworks (MOFs), by virtue of their high porosity, large surface area, and modifiable metal centers and ligands, have gained tremendous attention and demonstrated promising prospects in electro/photocatalytic energy conversion. However, the small pore sizes and limited active sites of 3D bulk MOFs hinder their wide applications. Developing 2D MOFs with tailored thickness and large aspect ratio has emerged as an effective approach to meet these challenges, offering a high density of exposed active sites, better mechanical stability, better assembly flexibility, and shorter charge and photoexcited state transfer distances compared to 3D bulk MOFs. In this review, synthesis methods for the most up-to-date 2D MOFs are first overviewed, highlighting their respective advantages and disadvantages. Subsequently, a systematic analysis is conducted on the identification and electronic structure modulation of catalytic active sites in 2D MOFs and their applications in renewable energy conversion, including electrocatalysis and photocatalysis (electro/photocatalysis). Lastly, the current challenges and future development of 2D MOFs toward highly efficient and practical electro/photocatalysis are proposed.

Reducing Overpotential of Lithium-Oxygen Batteries by Diatomic Metal Catalyst Orbital Matching Strategy

Aprotic Li-O2 batteries have sparked attention in recent years due to their ultrahigh theoretical energy density. Nevertheless, their practical implementation is impeded by the sluggish reaction kinetics at the cathode. Comprehending the catalytic mechanisms is pivotal to developing efficient cathode catalysts for high-performance Li-O2 batteries. Herein, the intrinsic activity map of Li-O2 batteries is established based on the specific adsorption mode of O2 induced by diatomic catalyst orbital matching and the transfer-acceptance-backdonation mechanism, and the four-step screening strategy based on the intrinsic activity map is proposed. Guided by the strategy, FeNi@NC and FeCu@NC promising durable stability with a low overpotential are screened out from 27 Fe-Metal diatomic catalysts. Our research not only provides insights into the fundamental understanding of the reaction mechanism of Li-O2 batteries but also accelerates the rational design of efficient Li-O2 batteries based on the structure-activity relationship.

Controllable Regulation of the Oxygen Redox Process in Lithium-Oxygen Batteries by High-Configuration-Entropy Spinel with an Asymmetric Octahedral Structure

Designing bifunctional electrocatalysts to boost oxygen redox reactions is critical for high-performance lithium-oxygen batteries (LOBs). In this work, high-entropy spinel (Co0.2Mn0.2Ni0.2Fe0.2Cr0.2)3O4 (HEOS) is fabricated by modulating the internal configuration entropy of spinel and studied as the oxygen electrode catalyst in LOBs. Under the high-entropy atomic environment, the Co-O octahedron in spinel undergoes asymmetric deformation, and the reconfiguration of the electron structure around the Co sites leads to the upward shift of the d-orbital centers of the Co sites toward the Fermi level, which is conducive to the strong adsorption of redox intermediate LiO2 on the surface of the HEOS, ultimately forming a layer of a highly dispersed Li2O2 thin film. Thin-film Li2O2 is beneficial for ion diffusion and electron transfer at the electrode-electrolyte interface, which makes the product easy to decompose during the charge process, ultimately accelerating the kinetics of oxygen redox reactions in LOBs. Based on the above advantages, HEOS-based LOBs deliver high discharge/charge capacity (12.61/11.72 mAh cm-2) and excellent cyclability (424 cycles). This work broadens the way for the design of cathode catalysts to improve oxygen redox kinetics in LOBs.

Light Enables the Cathodic Interface Reaction Reversibility in Solid-State Lithium-Oxygen Batteries

Limited triple-phase boundaries arising from the accumulation of solid discharge product(s) in solid-state cathodes (SSCs) pose a challenge to high-property solid-state lithium-oxygen batteries (SSLOBs). Light-assisted SSLOBs have been gradually explored as an ingenious system; however, the fundamental mechanisms of the SSCs interface behavior remain unclear. Here, we discovered that light assistance can enhance the fast inner-sphere charge transfer in SSCs and regulate the discharge products with spherical particles generated via the surface growth model. Moreover, the high photoelectron excitation and transportation capabilities of SSCs can retard cathodic catalytic decay by avoiding structural degradation of the cathode with a reduced charge voltage. The light-induced SSLOBs exhibited excellent stability (170 cycles) with a low discharge-charge polarization overpotential (0.27 V). Furthermore, transparent SSLOBs with exceptional flexibility, mechanical stability, and multiform shapes were fabricated for theory-to-practical applications in sunlight-induced batteries. Our study opens new opportunities for the introduction of solar energy into energy storage systems.

Spin-Magnetic Effect of d-π Conjugation Polymer Enhanced O-H Cleavage in Water Oxidation

A deep understanding of the mechanism for the spin-magnetic effect on O-H cleavage is crucial for the development of new catalysts for water oxidation. Herein, we designed and synthesized the crystalline Fe-DABDT and Co-DABDT (DABDT = 2,5-diaminobenzene-1,4-dithiol) and optimized an effective magnetic moment to explore the role of the spin-magnetic effect in the regulation of water oxidation activity. It can be found that the OER activity of the catalyst is positively correlated with its effective magnetic moment. Under the external magnetic field, Fe-DABDT with more spin single electrons has a stronger spin-magnetic response to water oxidation than Fe/Co-DABDT and Co-DABDT. The increase in OER current of Fe-DABDT is nearly 2 times higher than that of Co-DABDT. Experimental and density functional theory studies show that magnetized Fe sites could realize nucleophilic reaction, accelerate the polarization of electron spin states, and promote the polar decomposition of O-H and the formation of the O-O bond. This study provides mechanistic insight into the spin-magnetic effect of oxygen evolution reaction and further understanding of the spin origin of catalytic activity, which is expected to improve the energy efficiency of hydrogen production.

Coupling MoSe2 with Non-Stoichiometry Ni0.85 Se in Carbon Hollow Nanoflowers for Efficient Electrocatalytic Synergistic Effect on Li-O2 Batteries

Li-O2 batteries could deliver ultra-high theoretical energy density compared to current Li-ion batteries counterpart. The slow cathode reaction kinetics in Li-O2 batteries, however, limits their electrocatalytic performance. To this end, MoSe2 and Ni0.85 Se nanoflakes were decorated in carbon hollow nanoflowers, which were served as the cathode catalysts for Li-O2 batteries. The hexagonal Ni0.85 Se and MoSe2 show good structural compatibility with the same space group, resulting in a stable heterogeneous structure. The synergistic interaction of the unsaturated atoms and the built-in electric fields on the heterogeneous structure exposes abundant catalytically active sites, accelerating ion and charge transport and imparting superior electrochemical activity, including high specific capacities and stable cycling performance. More importantly, the lattice distances of the Ni0.85 Se (101) plane and MoSe2 (100) plane at the heterogeneous interfaces are highly matched to that of Li2 O2 (100) plane, facilitating epitaxial growth of Li2 O2 , as well as the formation and decomposition of discharge products during the cycles. This strategy of employing nonstoichiometric compounds to build heterojunctions and improve Li-O2 battery performance is expected to be applied to other energy storage or conversion systems.

New Reaction Pathway of Superoxide Disproportionation Induced by a Soluble Catalyst in Li-O2 Batteries

Aprotic Li-O2 battery has attracted considerable interest for high theoretical energy density, however the disproportionation of the intermediate of superoxide (O2 - ) during discharge and charge leads to slow reaction kinetics and large voltage hysteresis. Herein, the chemically stable ruthenium tris(bipyridine) (RB) cations are employed as a soluble catalyst to alternate the pathway of O2 - disproportionation and its kinetics in both the discharge and charge processes. RB captures O2 - dimer and promotes their intramolecular charge transfer, and it decreases the energy barrier of the disproportionation reaction from 7.70 to 0.70 kcal mol-1 . This facilitates the discharge and charge processes and simultaneously mitigates O2 - and singlet oxygen related side reactions. These endow the Li-O2 battery with reduced discharge/charge voltage gap of 0.72 V and prolonged lifespan for over 230 cycles when coupled with RuO2 catalyst. This work highlights the vital role of superoxide disproportionation for Li-O2 battery.

High-Yield Synthesis of Colloidal Carbon Rings and Their Applications in Self-Standing Electrodes of Li-O2 Batteries

The use of carbon materials in porous electrodes has impressive advantages. However, precisely tailoring the multilevel pore structure of carbon electrodes remains an unsolved challenge. Here, we report a highly efficient site-selective growth strategy to synthesize colloidal carbon rings by templating patchy droplets. Carbon rings are used for the direct fabrication of self-standing porous electrodes with hierarchical pores for lithium-oxygen batteries (LOBs). In situ atomic force microscopy reveals that during discharge the discharge products densely nucleate and grow on carbon rings, demonstrating that such rings are a very potential electrode material in LOBs. The hollow carbon ring electrode (HCRE) possesses micrometer-scale channels formed by random packing of rings and nanochannels consisting of ring-shaped hollow cavities connected by nanosized pores in the wall. Both channels contribute to ion transportation and gas diffusion, but the storage of the discharge products mainly lies in micrometer-scale channels, leading to a high discharge capacity of LOBs (20 658 mAh/g). Our work paves a new way to construct hierarchically porous electrodes for application in electrocatalysis and electrochemical energy storage.

Enhanced Redox Electrocatalysis in High-Entropy Perovskite Fluorides by Tailoring d-p Hybridization

High-entropy catalysts featuring exceptional properties are, in no doubt, playing an increasingly significant role in aprotic lithium-oxygen batteries. Despite extensive effort devoted to tracing the origin of their unparalleled performance, the relationships between multiple active sites and reaction intermediates are still obscure. Here, enlightened by theoretical screening, we tailor a high-entropy perovskite fluoride (KCoMnNiMgZnF3-HEC) with various active sites to overcome the limitations of conventional catalysts in redox process. The entropy effect modulates the d-band center and d orbital occupancy of active centers, which optimizes the d-p hybridization between catalytic sites and key intermediates, enabling a moderate adsorption of LiO2 and thus reinforcing the reaction kinetics. As a result, the Li-O2 battery with KCoMnNiMgZnF3-HEC catalyst delivers a minimal discharge/charge polarization and long-term cycle stability, preceding majority of traditional catalysts reported. These encouraging results provide inspiring insights into the electron manipulation and d orbital structure optimization for advanced electrocatalyst.

High-Performance Electrochemical Actuator under an Ultralow Driving Voltage with a Mixed Electronic-Ionic Conductive Metal-Organic Framework

Although versatile deformation, high flexibility, and environmental friendliness of electrochemical actuators (EAs) have made them promising in bioinspired soft robots and biomedical devices, the relatively high driving voltages unfortunately impose great restrictions on their applications in low-energy and human-friendly electronics. Here, we find that the uses of a mixed electronic-ionic conductive metal-organic framework (c-MOF), i.e., Ni3(hexaiminotriphenylene)2 (Ni3(HITP)2), largely lower the driving voltage of EAs. The as-fabricated EA can work under a driving voltage as low as 0.1 V, representing the lowest value among those for the c-MOF-based EAs reported so far. The Ni3(HITP)2-based EA shows an excellent actuation performance such as a high bending strain difference of 0.48% (±0.5 V, 0.1 Hz) and long-term durability of >99% after 15,000 cycles due to the improved conductivity up to 1000 S·cm-1 and double-layer capacitance as high as 176.3 F·g-1 stemming from the mixed electronic-ionic conduction of Ni3(HITP)2.

Orbital Coupling of PbO7 Node in Single-Crystal Metal-Organic Framework Enhances Li-O2 Battery Electrocatalysis

Optimizing the local coordination environment of metal centers in metal-organic frameworks (MOFs) is crucial yet challenging for regulating the overpotential of lithium-oxygen (Li-O2) batteries. Herein, we report the synthesis of a class of PbO7 nodes in a single crystal MOF (naphthalene-lead-MOF, known as Na-Pb-MOF) to significantly enhance the kinetics of both discharge and charge processes. Compared to the PbO6 node in the single-crystal tetramethoxy-lead-MOF (4OMe-Pb-MOF), the bond length between Pb and O in the PbO7 node of Na-Pb-MOF increases, resulting in weaker Pb 5d-O 2p orbital coupling, which optimizes the adsorption interaction toward intermediates, and thereby promotes the rate-determining steps of both the reduction of LiO2 to Li2O2 and the oxidation of LiO2 to O2 for reducing the activation energy of the overall reaction. Consequently, Li-O2 batteries based on Na-Pb-MOF electrocatalysts exhibit a low total charge-discharge overpotential of 0.52 V and an excellent cycle life of 140 cycles.

Developing a class of dual atom materials for multifunctional catalytic reactions

Dual atom catalysts, bridging single atom and metal/alloy nanoparticle catalysts, offer more opportunities to enhance the kinetics and multifunctional performance of oxygen reduction/evolution and hydrogen evolution reactions. However, the rational design of efficient multifunctional dual atom catalysts remains a blind area and is challenging. In this study, we achieved controllable regulation from Co nanoparticles to CoN4 single atoms to Co2N5 dual atoms using an atomization and sintering strategy via an N-stripping and thermal-migrating process. More importantly, this strategy could be extended to the fabrication of 22 distinct dual atom catalysts. In particular, the Co2N5 dual atom with tailored spin states could achieve ideally balanced adsorption/desorption of intermediates, thus realizing superior multifunctional activity. In addition, it endows Zn-air batteries with long-term stability for 800 h, allows water splitting to continuously operate for 1000 h, and can enable solar-powered water splitting systems with uninterrupted large-scale hydrogen production throughout day and night. This universal and scalable strategy provides opportunities for the controlled design of efficient multifunctional dual atom catalysts in energy conversion technologies.

Terephthalic Acid Intercalated CoNi-LDH Materials for Improved Li-O2 Battery

CoNi-LDH (layered CoNi double hydroxides) hollow nanocages with specific morphology are obtained by Ni ion etching of ZIF-67 (Zeolitic imidazolate framework-67). The structure of the layered materials is further modified by molecular intercalation. The original interlayer anions are replaced by the ion exchange effect of terephthalic acid, which helps to increase the interlayer distance of the material. The intercalated cage-like structures not only benefit for the storage of oxygen, and the discharge product reaction, but also have more support between the material layers. The experimental results show that the excessive use of intercalation agent will affect structural stability of the intercalated CoNi-LDH. By adjusting the amount of terephthalic acid, the intercalated CoNi-LDH-2 (with 0.02 mmol terephthalic acid intercalated) is not easy to collapse after 209 cycles and shows the best electrochemical performance in Li-O2 battery.

Modulating the Reaction Configuration by Breaking the Structural Symmetry of Active Sites for Efficient Photocatalytic Reduction of Low-concentration CO2

Photocatalytic conversion of low-concentration CO2 is considered as a promising way to simultaneously mitigate the environmental and energy issues. However, the weak CO2 adsorption and tough CO2 activation process seriously compromise the CO production, due to the chemical inertness of CO2 molecule and the formed fragile metal-C/O bond. Herein, we designed and fabricated oxygen vacancy contained Co3 O4 hollow nanoparticles on ordered macroporous N-doped carbon framework (Vo-HCo3 O4 /OMNC) towards photoreduction of low-concentration CO2 . In situ spectra and ab initio molecular dynamics simulations reveal that the constructed oxygen vacancy is able to break the local structural symmetry of Co-O-Co sites. The formation of asymmetric active site switches the CO2 configuration from a single-site linear model to a multiple-sites bending one with a highly stable configuration, enhancing the binding and structural polarization of CO2 molecules. As a result, Vo-HCo3 O4 /OMNC shows unprecedent activity in the photocatalytic conversion of low-concentration CO2 (10 % CO2 /Ar) under laboratory light source or even natural sunlight, affording a syngas yield of 337.8 or 95.2 mmol g-1  h-1 , respectively, with an apparent quantum yield up to 4.2 %.

Optimizing Eg Orbital Occupancy of Transition Metal Sulfides by Building Internal Electric Fields to Adjust the Adsorption of Oxygenated Intermediates for Li-O2 Batteries

Li-O2 batteries are acknowledged as one of the most promising energy systems due to their high energy density approaching that of gasoline, but the poor battery efficiency and unstable cycling performance still hinder their practical application. In this work, hierarchical NiS2 -MoS2 heterostructured nanorods are designed and successfully synthesized, and it is found that heterostructure interfaces with internal electric fields between NiS2 and MoS2 optimized eg orbital occupancy, effectively adjusting the adsorption of oxygenated intermediates to accelerate reaction kinetics of oxygen evolution reaction and oxygen reduction reaction. Structure characterizations coupled with density functional theory calculations reveal that highly electronegative Mo atoms on NiS2 -MoS2 catalyst can capture more eg electrons from Ni atoms, and induce lower eg occupancy enabling moderate adsorption strength toward oxygenated intermediates. It is evident that hierarchical NiS2 -MoS2 nanostructure with fancy built-in electric fields significantly boosted formation and decomposition of Li2 O2 during cycling, which contributed to large specific capacities of 16528/16471 mAh g-1 with 99.65% coulombic efficiency and excellent cycling stability of 450 cycles at 1000 mA g-1 . This innovative heterostructure construction provides a reliable strategy to rationally design transition metal sulfides by optimizing eg orbital occupancy and modulating adsorption toward oxygenated intermediates for efficient rechargeable Li-O2 batteries.

Delocalized Electronic Engineering of Ni5 P4 Nanoroses for Durable Li-O2 Batteries

The sluggish kinetics and issues associated with the parasitic reactions of cathodes are major obstacles to the large-scale application of Li-O2 batteries (LOBs), despite their large theoretical energy density. Therefore, efficient electrocatalyst design is critical for optimizing their performance. Ni5 P4 is analyzed theoretically as a cathode material, and the downshift of the d-band center is found to enhance electron occupation in antibonding orbits, providing a valuable descriptor for understanding and enhancing the intrinsic electrocatalytic activity. In this study, it is demonstrated that incorporating additional nitrogen atoms into Ni5 P4 nanoroses regulates the electronic structure, resulting in superior electrocatalytic performance in LOBs. Further spectroscopic analysis and density functional theory calculations reveal that the incorporated nitrogen sites can effectively induce localized structure polarization, lowering the energy barrier for the production of desirable intermediates and thus enhancing battery capacity and preventing cell degradation. This approach provides a sound basis for developing advanced electrode materials with optimized electronic structures for high-performance LOBs.

Improving the intrinsic activity of ultrathin 2D-2D heterostructures by bridge-bonded Ni-O-Ti ligands for efficient oxygen evolution

The integration of ultrathin two-dimensional (2D) semiconductors with other conductive 2D materials to form hybrid electrocatalysts with abundant heterointerfaces can enhance the electrocatalytic activity by facilitating interfacial charge transfer. However, the hybrid electrocatalysts with weak interfacial bonding have limited effect on the electrocatalytic performance because the intrinsic activity of interfacial sites cannot be altered by weak interfacial interactions. As a proof-of-concept, we design ultrathin 2D-2D heterostructures with bridge-bonded Ni-O-Ti ligands based on single-layered Ti₃C₂T_xMXene and metal hydroxides, and further reveal the structure-activity correlation between interfacial bonding and electrocatalytic oxygen evolution reaction by combining theoretical and experimental studies. Density functional theory calculations reveal the modulation of the electronic structure of interfacial metal sites after the formation of bridged interfacial Ni-O-Ti bonding. Compared with the hydrogen-bond-linked heterostructure, the ultrathin 2D-2D heterostructure with bridge-bonded Ni-O-Ti ligands shows enhanced intrinsic activity and stability towards electrocatalytic oxygen evolution with a very low overpotential of 205 mV at 10 mA cm^-2and the long-term durability. This work provides a new understanding and approach for the design and development of 2D hybrid catalysts with highly efficient electrocatalytic activity.

Advances of Electroactive Metal-Organic Frameworks

The preparation of electroactive metal-organic frameworks (MOFs) for applications of supercapacitors and batteries has received much attention and remarkable progress during the past few years. MOF-based materials including pristine MOFs, hybrid MOFs or MOF composites, and MOF derivatives are well designed by a combination of organic linkers (e.g., carboxylic acids, conjugated aromatic phenols/thiols, conjugated aromatic amines, and N-heterocyclic donors) and metal salts to construct predictable structures with appropriate properties. This review will focus on construction strategies of pristine MOFs and hybrid MOFs as anodes, cathodes, separators, and electrolytes in supercapacitors and batteries. Descriptions and discussions follow categories of electrochemical double-layer capacitors (EDLCs), pseudocapacitors (PSCs), and hybrid supercapacitors (HSCs) for supercapacitors. In contrast, Li-ion batteries (LIBs), Lithium-sulfur batteries (LSBs), Lithium-oxygen batteries (LOBs), Sodium-ion batteries (SIBs), Sodium-sulfur batteries (SSBs), Zinc-ion batteries (ZIBs), Zinc-air batteries (ZABs), Aluminum-sulfur batteries (ASBs), and others (e.g., LiSe, NiZn, H⁺ , alkaline, organic, and redox flow batteries) are categorized for batteries.

Band engineering in heterostructure catalysts to achieve High-Performance Lithium-Oxygen batteries

The electronic structure of cathode catalysts dominates the electrochemistry reaction kinetics in lithium-oxygen batteries. However, conventional catalysts perform inferior intrinsic activity due to the low d-band level of the active sites makes it difficult to bond with the reaction intermediates, which results in poor electrochemical performance of lithium-oxygen batteries. Herein, NiFe₂O₄/MoS₂ heterostructures are elaborately constructed to reach an electronic state balance for the active sites, which realizes the upper shift of the d-band level and enhanced adsorption of intermediates. Density functional theory calculation suggests that the d-band center of Fe active sites on the heterostructure moves toward the Fermi level, demonstrating the heterointerface engineering endows Fe active sites with high d-band level by the transfer and balance of electron. As a proof of concept, lithium-oxygen battery catalyzed by NiFe₂O₄/MoS₂ exhibits a large specific capacity of 21526 mA h g^-1 and an extended cycle performance for 268 cycles. Moreover, NiFe₂O₄/MoS₂ with strong adsorption to intermediates promotes the uniform growth of discharge products, which is favor of the reversible decomposition during cycling. This work presents the energy band regulation of the active sites in heterostructure catalysts has great feasibility for enhancing catalytic activities.

Engineering the Electronic Interaction between Atomically Dispersed Fe and RuO2 Attaining High Catalytic Activity and Durability Catalyst for Li-O2 Battery

It is significant to develop catalysts with high catalytic activity and durability to improve the electrochemical performances of lithium-oxygen batteries (LOBs). While electronic metal-support interaction (EMSI) between metal atoms and support has shown great potential in catalytic field. Hence, to effectively improve the electrochemical performance of LOBs, atomically dispersed Fe modified RuO₂ nanoparticles are designed to be loaded on hierarchical porous carbon shells (Fe_SA -RuO₂ /HPCS) based on EMSI criterion. It is revealed that the Ru-O-Fe₁ structure is formed between the atomically dispersed Fe atoms and the surrounding Ru sites through electron interaction, and this structure could act as the ultra-high activity driving force center of oxygen reduction/evolution reaction (ORR/OER). Specifically, the Ru-O-Fe₁ structure enhances the reaction kinetics of ORR to a certain extent, and optimizes the morphology of discharge products by reducing the adsorption energy of catalyst for O₂ and LiO₂ ; while during the OER process, the Ru-O-Fe₁ structure not only greatly enhances the reaction kinetics of OER, but also catalyzes the efficient decomposition of the discharge products Li₂ O₂ by the favorable electron transfer between the active sites and the discharge products. Hence, LOBs based on FeSA-RuO₂ /HPCS cathodes show an ultra-low over-potential, high discharge capacity and superior durability.

Tailoring Metal-Oxygen Bonds Boosts Oxygen Reaction Kinetics for High-Performance Zinc-Air Batteries

Metal-oxygen bonds significantly affect the oxygen reaction kinetics of metal oxide-based catalysts but still face the bottlenecks of limited cognition and insufficient regulation. Herein, we develop a unique strategy to accurately tailor metal-oxygen bond structure via amorphous/crystalline heterojunction realized by ion-exchange. Compared with pristine amorphous CoSnO_3-y, iron ion-exchange induced amorphous/crystalline structure strengthens the Sn-O bond, weakens the Co-O bond strength, and introduces additional Fe-O bond, accompanied by abundant cobalt defects and optimal oxygen defects with larger pore structure and specific surface area. The optimization of metal-oxygen bond structure is dominated by the introduction of crystal structure and further promoted by the introduction of Fe-O bond and rich Co defect. Remarkably, the Fe doped amorphous/crystalline catalyst (Co_1-xSnO_3-y-Fe_0.021-A/C) demonstrates excellent oxygen evolution reaction and oxygen reduction reaction activities with a smaller potential gap (ΔE = 0.687 V), and the Zn-air battery based with Co_1-xSnO_3-y-Fe_0.021-A/C exhibits excellent output power density, cycle performance, and flexibility.

Covalent organic frameworks with Ni-Bis(dithiolene) and Co-porphyrin units as bifunctional catalysts for Li-O2 batteries

The rational design of efficient and stable catalysts for the oxygen reduction reaction and oxygen evolution reaction (ORR/OER) is the key to improving Li-O₂ battery performance. Here, we report the construction of ORR/OER bifunctional cathode catalysts in a covalent organic framework (COF) platform by simultaneously incorporating Ni-bis(dithiolene) and Co-porphyrin units. The resulting bimetallic Ni/Co-COF exhibits high surface area, fairly good electrical conductivity, and excellent chemical stability. Li-O₂ batteries with the Ni/Co-COF-based cathode show a low discharge/charge potential gap (1.0 V) and stable cycling (200 cycles) at a current density of 500 mA g^-1, rivaling that of PtAu nanocrystals. Density functional theory computations and control experiments using nonmetal or single metal-based isostructural COFs reveal the critical role of Ni and Co sites in reducing the discharge/charge overpotentials and regulating the Li₂O₂ deposition. This work highlights the advantage of bimetallic COFs in the rational design of efficient and stable Li-O₂ batteries.

Reversible Metal and Ligand Redox Chemistry in Two-Dimensional Iron-Organic Framework for Sustainable Lithium-Ion Batteries

Metal-organic frameworks (MOFs) are emerging as attractive electrode materials for lithium-ion batteries, owing to their fascinating features of sustainable resources, tunable chemical components, flexible molecular skeletons, and renewability. However, they are faced with a limited number of redox-active sites and unstable molecular frameworks during electrochemical processes. Herein, we design a novel two-dimensional (2D) iron(III)-tetraamino-benzoquinone (Fe-TABQ) with dual redox centers of Fe cations and TABQ ligands for high-capacity and stable lithium storage. It is constructed of square-planar Fe-N₂O₂ linkages and phenylenediamine building blocks, between which the Fe-TABQ chains are connected by multiple hydrogen bonds, and then featured as an extended π-d-conjugated 2D structure. The redox chemistry of both Fe³⁺ cations and TABQ anions is revealed to render its remarkable specific capacity of 251.1 mAh g^-1. Benefiting from the intrinsic robust Fe-N(O) bonds and reinforced Li-N(O) bonds during cycling, Fe-TABQ delivers high capacity retentions over 95% after 200 cycles at various current densities. This work will enlighten more investigations for the molecular designs of advanced MOF-based electrode materials.

Quenching singlet oxygen via intersystem crossing for a stable Li-O2 battery

Aprotic Li-O₂ batteries are a promising energy storage technology, however severe side reactions during cycles lead to their poor rechargeability. Herein, highly reactive singlet oxygen (¹O₂) is revealed to generate in both the discharging and charging processes and is deterimental to battery stability. Electron-rich triphenylamine (TPA) is demonstrated as an effective quencher in the electrolyte to mitigate ¹O₂ and its associated parasitic reactions, which has the tertiary amine and phenyl groups to manifest excellent electrochemical stability and chemical reversibility. It reacts with electrophilic ¹O₂ to form a singlet complex during cycles, and it then quickly transforms to a triplet complex through nonradiative intersystem crossing (ISC). This efficiently accelerates the conversion of ¹O₂ to the ground-state triplet oxygen to eliminate its derived side reactions, and the regeneration of TPA. These enable the Li-O₂ battery with obviously reduced overvoltages and prolonged lifetime for over 310 cycles when coupled with a RuO₂ catalyst. This work highlights the ISC mechanism to quench ¹O₂ in Li-O₂ battery.

Crystal Phase Conversion on Cobalt Oxide: Stable Adsorption toward LiO2 for Film-Like Discharge Products Generation in Li-O2 Battery

Regulating the structure and morphology of discharge product is one of the key points for developing high performance Li-O₂ batteries (LOBs). In this study, the reaction mechanism of LOB is successfully controlled by the regulated fine structure of cobalt oxide through tuning the crystallization process. It is demonstrated that the cobalt oxide with lower crystallinity shows stronger affinity toward LiO₂ , inducing the growth of film-like LiO₂ on the electrode surface and inhibiting the further conversion to Li₂ O₂ . The batteries catalyzed by the lower crystallinity cobalt oxide hollow spheres which pyrolyzed from ZIF-67 at 260 °C (ZIF-67-260), go through the generation and decomposition of amorphous film-like LiO₂ , which significantly reduces the charge overpotential and improves the cycle life. By contrast, the ZIF-67 hollow spheres pyrolyzed at 320 °C (ZIF-67-320) with better crystallinity are more likely to go through the solution-mediated mechanism and induce the aggregation of discharge product, resulting in the sluggish kinetics and limited performance. The combined density functional theory data also directly support the strong relationship between the adsorption toward LiO₂ by the electrocatalyst and the battery performance. This work provides an important way for tuning the intermediate and constructing the high-performance battery system.

Tuning the Spin State of the Iron Center by Bridge-Bonded Fe-O-Ti Ligands for Enhanced Oxygen Reduction

Exploring functional substrates and precisely regulating the electronic structures of atomic metal active species with moderate spin state are of great importance yet remain challenging. Hereon, we provide an axial Fe-O-Ti ligand regulated spin-state transition strategy to improve the oxygen reduction reaction (ORR) activity of Fe centers. Theoretical calculations indicate that Fe-O-Ti ligands in FeN₃ O-O-Ti can induce a low-to-medium spin-state transition and optimize O₂ adsorption by FeN₃ O. As a proof-of-concept, the oriented catalyst was prepared from atomic-Fe-doped polymer-like quantum dots and ultrathin o-terminated MXene. The optimal catalyst exhibits an intrinsic activity that is almost 5 times higher than the control sample (without axial Fe-O-Ti ligands). It also delivers a superior performance in Zn-air batteries and H₂ /O₂ anion exchange membrane fuel cells in a wide-temperature range.

Facile, Atom-Economic, Chemical Thinning Strategy for Ultrathin Lithium Foils

Metallic lithium is considered as the ultimate anode material for lithium-based batteries due to its highest energy density. However, as an anode, commercial Li metal foils are too thick, with a large amount of trouble to balance its exorbitant areal capacity with common cathodes in full cells. Here, a new chemical thinning strategy is proposed via a simple surface dissolving reaction between lithium and naphthalene, which enables scalable, continuous, and roll-to-roll preparation of ultrathin Li foil. A Li foil less than 15 μm with a clean surface can be successfully obtained within 20 min. The thinning rate and thickness of the lithium foil can be easily adjusted by changing the concentration, temperature, and operation mode. The produced Li-Naph solution after thinning can also be used as a multifunctional reagent of great value, and the Li ions in the final waste solution can be further extracted in the form of Li₂CO₃, showing superior lithium atom economy of our strategy.