Controlling Syneresis of Hydrogels Using Organic Salts

Highly Conductive Supramolecular Salt Gel Electrolyte for Flexible Supercapacitors

Conductive gels have greatly facilitated the development of flexible energy storage devices, including supercapacitors, batteries, and triboelectric nanogenerators. However, it is challenging for gel electrolytes to tackle the trade-off issues between mechanical properties and conductivity. Herein, a strategy of all inorganic salt-driven supramolecular networks is presented to construct gel electrolytes with high conductivity and reliable mechanical performance for flexible supercapacitors. The salt gel is successfully fabricated by combining a salt supramolecular network constructed by NH4Mo7O24·4H2O and FeCl3·6H2O and a polymer network of poly(vinyl alcohol). The inorganic salt supramolecular network serves as a rigid self-supporting framework in the hydrogel system for improving the mechanical properties and providing abundant active sites for accelerating ion transport. Furthermore, the salt gel-enabled supercapacitors are equipped and exhibit a high specific capacitance (199.4 mF cm-2) and excellent energy density (27.69 μWh cm-2). Moreover, the flexible supercapacitors not only present remarkable cyclic stability after 3000 charging/discharging cycles but also exhibit good electrochemical stability even under severe deformation conditions. The strategy of salt-gel-driven flexible supercapacitors would provide fresh thinking for the development of advanced flexible energy storage fields.

Ag+-Induced Supramolecular Polymers of Folic Acid: Reinforced by External Kosmotropic Anions Exhibiting Salting Out

Introducing kosmotropic salts enhances protein stability and reduces solubility by withdrawing water from the protein surface, leading to 'salting out', a phenomenon we have mimicked in supramolecular polymers (SPs). Under the guidance of Ag+, folic acid (FA) self-assembled in water through slipped-stacking and hydrophobic interactions into elongated, robust one-dimensional SPs, resulting in thermo-stable supergels. The SPs exhibited temperature and dilution tolerance, attributed to the stability of the FA-Ag+ complex and its hydrophobic stacking. Importantly, FA-Ag+ SP's stability has been augmented by the kosmotropic anions, such as SO42-, strengthening hydrophobic interactions in the SP, evident from the enhanced J-band, causing improvement of gel's mechanical property. Interestingly, higher kosmotrope concentrations caused a significant decrease in SP's solubility, leading to precipitation of the reinforced SPs─a 'salting out' effect. Conversely, chaotropes like ClO4- slightly destabilized hydrophobic stacking and promoted an extended conformation of individual SP chain with enhanced solubility, resembling a 'salting in' effect.

Understanding multicomponent low molecular weight gels from gelators to networks

BACKGROUND

The construction of gels from low molecular weight gelators (LMWG) has been extensively studied in the fields of bio-nanotechnology and other fields. However, the understanding gaps still prevent the prediction of LMWG from the full design of those gel systems. Gels with multicomponent become even more complicated because of the multiple interference effects coexist in the composite gel systems.

AIM OF REVIEW

This review emphasizes systems view on the understanding of multicomponent low molecular weight gels (MLMWGs), and summarizes recent progress on the construction of desired networks of MLMWGs, including self-sorting and co-assembly, as well as the challenges and approaches to understanding MLMWGs, with the hope that the opportunities from natural products and peptides can speed up the understanding process and close the gaps between the design and prediction of structures.

KEY SCIENTIFIC CONCEPTS OF REVIEW

This review is focused on three key concepts. Firstly, understanding the complicated multicomponent gels systems requires a systems perspective on MLMWGs. Secondly, several protocols can be applied to control self-sorting and co-assembly behaviors in those multicomponent gels system, including the certain complementary structures, chirality inducing and dynamic control. Thirdly, the discussion is anchored in challenges and strategies of understanding MLMWGs, and some examples are provided for the understanding of multicomponent gels constructed from small natural products and subtle designed short peptides.

Supramolecular gels - a panorama of low-molecular-weight gelators from ancient origins to next-generation technologies

Supramolecular gels, self-assembled from low-molecular-weight gelators (LMWGs), have a long history and a bright future. This review provides an overview of these materials, from their use in lubrication and personal care in the ancient world, through to next-generation technologies. In academic terms, colloid scientists in the 19th and early 20th centuries first understood such gels as being physically assembled as a result of weak interactions, combining a solid-like network having a degree of crystalline order with a highly mobile liquid-like phase. During the 20th century, industrial scientists began using these materials in new applications in the polymer, oil and food industries. The advent of supramolecular chemistry in the late 20th century, with its focus on non-covalent interactions and controlled self-assembly, saw the horizons for these materials shifted significantly beyond their historic rheological applications, expanding their potential. The ability to tune the LMWG chemical structure, manipulate hierarchical assembly, develop multi-component systems, and introduce new types of responsive and interactive behaviour, has been transformative. Furthermore, the dynamics of these materials are increasingly understood, creating metastable gels and transiently-fueled systems. New approaches to shaping and patterning gels are providing a unique opportunity for more sophisticated uses. These supramolecular advances are increasingly underpinning and informing next-generation applications - from drug delivery and regenerative medicine to environmental remediation and sustainable energy. In summary, this article presents a panorama over the field of supramolecular gels, emphasising how both academic and industrial scientists are building on the past, and engaging new fundamental insights and innovative concepts to open up exciting horizons for their future use.

Thermosensitive Polyurethane-Based Hydrogels as Potential Vehicles for Meloxicam Delivery

Meloxicam (MX) is a nonsteroidal anti-inflammatory drug (NSAID) used mainly to reduce pain, inflammation, and fever. In the present study, thermosensitive polyurethane (PU)-based hydrogels with various excipients (PEG, PVP, HPC, and essential oil) were prepared and loaded with MX. Rheological investigations were carried out on the PU-based formulations in various shear regimes, and their viscoelastic characteristics were determined. The average size of the PU micelles was 35.8 nm at 37 °C and slightly increased at 37 nm in the presence of MX. The zeta potential values of the hydrogels were between -10 mV and -11.5 mV. At pH = 6 and temperature of 37 °C, the formulated PU-based hydrogels loaded with MX could deliver significant amounts of the active substance, between 60% and 80% over 24-48 h and more than 90% within 2 weeks. It was found that anomalous transport phenomena dominated MX's release mechanism from the PU-based networks. The results are encouraging for further studies aiming to design alternative carriers to commercial dosage forms of nonsteroidal anti-inflammatory drugs.

A novel nonreversible heat-induced low-molecular-weight gel based on naturally-occurring self-assembled fupenzic acid for tumor therapy

Herein, a nonreversible heat-induced supramolecular gel based on natural products was reported for the first time. This natural triterpenoid, fupenzic acid (FA), isolated from the roots of Rosa laevigata, was discovered to be capable of forming supramolecular gel spontaneously in 50 % ethanol-water solution induced by heating. Distinguished from the common thermosensitive gels, the FA-gel showed a distinctive nonreversible phase transition from the liquid to gel state upon heating. In this work, the entire gelation process of FA-gel induced by heating was recorded digitally by microrheology monitor. And a unique heat-induced gelation mechanism based on self-assembled FA has been proposed by using various experimental methods and molecular dynamics (MD) simulation. Its excellent injectability and stability were also demonstrated. Furthermore, the FA-gel had been evaluated to exhibit better anti-tumor activity and higher biosafety comparing with its equivalent free-drug, which opened up a new possibility to reinforce antitumor efficacy by using natural product gelator originated from traditional Chinese medicine (TCM) without any complicated chemical modifications.

Beyond Sol-Gel: Molecular Gels with Different Transitions

The existence of sol–gel transitions is one of the most manifest properties of molecular gels. These transitions reflect their nature since they correspond to the association or dissociation of low weight molecules through non-covalent interactions to form the network constitutive of the gel. Most described molecular gels undergo only one gel-to-sol transition upon heating, and the reverse sol-to-gel transition upon cooling. It has been long observed that different conditions of formation could lead to gels with different morphologies, and that gels can undergo a transition from gel to crystals. However, more recent publications report molecular gels which exhibit additional transitions, for instance gel-to-gel transitions. This review surveys the molecular gels for which, in addition to sol–gel transitions, transitions of different nature have been reported: gel-to-gel transitions, gel-to-crystal transition, liquid–liquid phase separations, eutectic transformations, and synereses.

Nucleoside-Based Cross-Linkers for Hydrogels with Tunable Properties

Herein, we report bioderived cross-linkers to create biopolymer-based hydrogels with tunable properties. Nucleosides (inosine and uridine) and ribose (pentose sugar lucking the nitrogenous base) were partially oxidized to yield inosine dialdehyde (IdA), uridine dialdehyde (UdA), and ribose dialdehyde (RdA). The dialdehydes were further used as cross-linkers with polysaccharide chitosan to form hydrogels. Depending on the cross-linker type and concentration, the hydrogels showed tunable rheological, mechanical, and liquid holding properties allowing the preparation of injectable, soft, and moldable hydrogels. Computational modeling and molecular dynamics simulations shed light on hydrogel formation and revealed that, in addition to covalent bonding, noncovalent interactions (π-π stacking, cation-π, and H-bonding) also significantly contributed to the cross-linking process. To demonstrate various application possibilities, the prepared hydrogels were used as a growth platform for plant cells, as injectable inks for layer-by-layer 3D printing applications, and as moldable hydrogels for soft lithography to replicate the microstructure of the plant. These findings suggest that the obtained tunable biocompatible hydrogels have the potential to be good candidates for various biotechnological applications.

Biomineralization-Inspired Intermediate Precursor for the Controllable Gelation of Polyphenol-Macromolecule Hydrogels

Hydrogels composed of polyphenols and various macromolecules have been widely reported to have the advantage of facile preparation, mainly through the formation of hydrogen bonds. However, the traditional preparation method involves the direct mixing of polyphenols and macromolecules, which generally occurs too quickly and uncontrollably, and results in poor homogeneity, injectability, and shape designability. Here, inspired by the intermediate precursor during biomineralization, to facilitate transformation in a controllable way, we propose a novel and universal internal gelation method that creates an intermediate precursor by controlling the pH value to manipulate the elimination and generation of hydrogen bonds between a polyphenol and macromolecules. The precursor strategy greatly improves the homogeneity, injectability, and shape designability of the hydrogel while also achieving a controllable gelation process, and the gelation time can be accurately adjusted. The hydrogels prepared with this method exhibited superior capability to seal leaks, provided complete wound coverage, and showed the potential to be a shape-designable wearable strain sensor. Our study opens up a new way to construct and apply polyphenol-macromolecule hydrogels in a more controllable manner.

Amino acid containing amphiphilic hydrogelators with antibacterial and antiparasitic activities

Nanoscale self-assembly of peptide constructs represents a promising means to present bioactive motifs to develop new functional materials. Here, we present a series of peptide amphiphiles which form hydrogels based on β-sheet nanofibril networks, several of which have very promising anti-microbial and anti-parasitic activities, in particular against multiple strains of Leishmania including drug-resistant ones. Aromatic amino acid based amphiphilic supramolecular gelators C₁₄-Phe-CONH-(CH₂)_n-NH₂ (n = 6 for P1 and n = 2 for P3) and C₁₄-Trp-CONH-(CH₂)_n-NH₂ (n = 6 for P2 and n = 2 for P4) have been synthesized and characterized, and their self-assembly and gelation behaviour have been investigated in the presence of ultrapure water (P1, P2, and P4) or 2% DMSO(v/v) in ultrapure water (P3). The rheological, morphological and structural properties of the gels have been comprehensively examined. The amphiphilic gelators (P1 and P3) were found to be active against both Gram-positive bacteria B. subtilis and Gram-negative bacteria E. coli and P. aeruginosa. Interestingly, amphiphiles P1 and P3 containing an L-phenylalanine residue show both antibacterial and antiparasitic activities. Herein, we report that synthetic amphiphiles with an amino acid residue exhibit a potent anti-protozoan activity and are cytotoxic towards a wide array of protozoal parasites, which includes Indian varieties of Leishmania donovani and also kill resistant parasitic strains including BHU-575, MIL^R and CPT^R cells. These gelators are highly cytotoxic to promastigotes of Leishmania and trigger apoptotic-like events inside the parasite. The mechanism of killing the parasite is shown and these gelators are non-cytotoxic to host macrophage cells indicating the potential use of these gels as therapeutic agents against multiple forms of leishmaniasis in the near future.

Mediating Oxidation of Thioethers with Iodine—A Mild and Versatile Pathway to Trigger the Formation of Peptide Hydrogels

The development of redox‐triggerable peptide hydrogels poses fundamental challenges, since the highly specific peptide architectures required inevitably limit the versatility of such materials. A powerful, yet rarely applied approach to bypass those barriers is the application of a mediating redox reaction to gradually decrease the pH during hydrogel formation. We report a versatile strategy to trigger the formation of peptide hydrogels from readily accessible acid‐triggerable gelators by generating protons by oxidation of thioethers with triiodide. Adding thiodiglycol as a readily available thioether auxiliary to the basic precursor solution of a peptide gelator efficiently yielded hydrogels after mixing with triiodide, as studied in detail for Nap‐FF and demonstrated for other peptides. Furthermore, incorporation of the thioether moiety in the gelator backbone via the amino acid methionine, as shown for the tailormade Nap‐FMDM peptide, reduces the number of required additives.

Nanostructure Formation and Cell Spheroid Morphogenesis of a Peptide Supramolecular Hydrogel

Peptide-based hydrogels have attracted much attention due to their extraordinary applications in biomedicine and offer an excellent mimic for the 3D microenvironment of the extracellular matrix. These hydrated matrices comprise fibrous networks held together by a delicate balance of intermolecular forces. Here, we investigate the hydrogelation behavior of a designed decapeptide containing a tetraleucine self-assembling backbone and fibronectin-related tripeptides near both ends of the strand. We have observed that this synthetic peptide can produce hydrogel matrices entrapping >99% wt/vol % water. Ultrastructural analyses combining atomic force microscopy, small-angle neutron scattering, and X-ray diffraction revealed that amyloid-like fibrils form cross-linked networks endowed with remarkable thermal stability, the structure of which is not disrupted up to temperatures >80 °C. We also examined the interaction of peptide hydrogels with either NIH3T3 mouse fibroblasts or HeLa cells and discovered that the matrices sustain cell viability and induce morphogenesis into grape-like cell spheroids. The results presented here show that this decapeptide is a remarkable building block to prepare highly stable scaffolds simultaneously endowed with high water retention capacity and the ability to instruct cell growth into tumor-like spheroids even in noncarcinoma lineages.