Activating Lattice Oxygen in Layered Lithium Oxides through Cation Vacancies for Enhanced Urea Electrolysis

Altering electronic structure of nickel foam supported CoNi-based oxide through Al ions modulation for efficient oxygen evolution reaction

Developing highly active and durable non-precious metal-based electrocatalysts for the oxygen evolution reaction (OER) is crucial in achieving efficient energy conversion. Herein, we reported a CoNiAl0.5O/NF nanofilament that exhibits higher OER activity than previously reported IrO2-based catalysts in alkaline solution. The as-synthesized CoNiAl0.5O/NF catalyst demonstrates a low overpotential of 230 mV at a current density of 100 mA cm-2, indicating its high catalytic efficiency. Furthermore, the catalyst exhibits a Tafel slope of 26 mV dec-1, suggesting favorable reaction kinetics. The CoNiAl0.5O/NF catalyst exhibits impressive stability, ensuring its potential for practical applications. Detailed characterizations reveal that the enhanced activity of CoNiAl0.5O/NF can be attributed to the electronic modulation achieved through Al3+ incorporation, which promotes the emergence of higher-valence Ni metal, facilitating nanofilament formation and improving mass transport and charge transfer processes. The synergistic effect between nanofilaments and porous nickel foam (NF) substrate significantly enhances the electrical conductivity of this catalyst material. This study highlights the significance of electronic structures for improving the activity of cost-effective and non-precious metal-based electrocatalysts for the OER.

Iron-impregnated cellulosic carbon as an effective electrocatalyst for seawater oxidation

The quest for cost effective but active electrocatalysts for water oxidation is at the forefront of research towards hydrogen economy. In this regard, bamboo as biomass derived N-doped cellulosic carbon has shown potential electrocatalytic performance towards water oxidation. The impregnation of optimum metallic Fe boosts the performance further, achieving an overpotential value of 238 mV at a benchmark current density of 10 mA cm-2. Owing to its promising OER performances in alkaline freshwater, the electrocatalyst was further explored in alkaline saline water and alkaline real seawater, exhibiting overpotentials of 272 mV and 280 mV, respectively, to reach 10 mA cm-2 current density. Most importantly, the protective graphitic multilayer surrounding the metallic Fe allowed the electrocatalyst to demonstrate excellent durability over 30 h even at a high current density in alkaline real seawater electrolyte.

Ceria-Graphene Oxide Nanocomposite for Electro-oxidation of Urea: An Experimental and Theoretical Investigation

This study explores the potential of ceria-graphene oxide (CeO2-GO) nanocomposites as efficient electrocatalysts for urea electro-oxidation (UOR). This work combines experimental and theoretical investigations and characterization techniques confirm the successful formation of the CeO2 embedded on graphene oxide sheets. UOR activity was found to be dependent on both OH- and urea concentrations. The optimal UOR performance was achieved in a 0.1 M urea and 1.0 M KOH solution, as evidenced by the low Tafel slope of 60 mV/dec and high turnover frequency (TOF) of 1.690 s-1. DFT calculations revealed that the CeO2-GO nanocomposite exhibited strong urea adsorption due to its favorable bond lengths (Ce-O: 2.58 Å, O-H: 1.77 Å) and high adsorption energy (-1.05 eV). These findings revealed that the CeO2-GO nanocomposites are promising as efficient and durable electrocatalysts for urea conversion to valuable products like nitrogen and hydrogen gas, with potential applications in clean energy generation and ammonia synthesis.

Unlocking Efficient Hydrogen Production: Nucleophilic Oxidation Reactions Coupled with Water Splitting

Electrocatalytic water splitting driven by sustainable energy is a clean and promising water-chemical fuel conversion technology for the production of high-purity green hydrogen. However, the sluggish kinetics of anodic oxygen evolution reaction (OER) pose challenges for large-scale hydrogen production, limiting its efficiency and safety. Recently, the anodic OER has been replaced by a nucleophilic oxidation reaction (NOR) with biomass as the substrate and coupled with a hydrogen evolution reaction (HER), which has attracted great interest. Anode NOR offers faster kinetics, generates high-value products, and reduces energy consumption. By coupling NOR with hydrogen evolution reaction, hydrogen production efficiency can be enhanced while yielding high-value oxidation products or degrading pollutants. Therefore, NOR-coupled HER hydrogen production is another new green electrolytic hydrogen production strategy after electrolytic water hydrogen production, which is of great significance for realizing sustainable energy development and global decarbonization. This review explores the potential of nucleophilic oxidation reactions as an alternative to OER and delves into NOR mechanisms, guiding future research in NOR-coupled hydrogen production. It assesses different NOR-coupled production methods, analyzing reaction pathways and catalyst effects. Furthermore, it evaluates the role of electrolyzers in industrialized NOR-coupled hydrogen production and discusses future prospects and challenges. This comprehensive review aims to advance efficient and economical large-scale hydrogen production.

Selective oxygen reduction reaction: mechanism understanding, catalyst design and practical application

The oxygen reduction reaction (ORR) is a key component for many clean energy technologies and other industrial processes. However, the low selectivity and the sluggish reaction kinetics of ORR catalysts have hampered the energy conversion efficiency and real application of these new technologies mentioned before. Recently, tremendous efforts have been made in mechanism understanding, electrocatalyst development and system design. Here, a comprehensive and critical review is provided to present the recent advances in the field of the electrocatalytic ORR. The two-electron and four-electron transfer catalytic mechanisms and key evaluation parameters of the ORR are discussed first. Then, the up-to-date synthetic strategies and in situ characterization techniques for ORR electrocatalysts are systematically summarized. Lastly, a brief overview of various renewable energy conversion devices and systems involving the ORR, including fuel cells, metal-air batteries, production of hydrogen peroxide and other chemical synthesis processes, along with some challenges and opportunities, is presented.

Photo-Excited High-Spin State Ni (III) Species in Mo-Doped Ni3S2 for Efficient Urea Oxidation Reaction

Designing robust catalysts for increasing the sluggish kinetics of the urea oxidation reaction (UOR) is challenging. Herein, the regulation of spin states for metal active sites by photoexcitation to facilitate the adsorption of urea and intermediates is demonstrated. Mo-doped nickel sulfide nanoribbon arrays (Mo-Ni3S2@NMF) with excellent light-trapping capacity are successfully prepared. Under AM 1.5G illumination, the activity of the Mo-Ni3S2@NMF exhibits a 50% improvement in the UOR current. Compared with those under dark conditions, Mo-Ni3S2@NMF achieve 10 mA cm-2 at 1.315 VRHE for UOR and 1.32 Vcell for urea electrolysis, which are decreases of 15 and 80 mV, respectively. The electron spin resonance, in situ Fourier transform infrared spectroscopy analysis and density functional theory calculations reveal that illumination led to the formation of Ni3+ active sites in a high-spin state, which strengthens the d-p orbital hybridization of Ni-N, hence facilitating the adsorption of urea. C─N cleavage of the *CONN intermediate is further inhibited, which promotes the oxidation of urea molecules via the active N2 pathway, thereby accelerating the UOR rate.

Highly selective urea electrooxidation coupled with efficient hydrogen evolution

Electrochemical urea oxidation offers a sustainable avenue for H2 production and wastewater denitrification within the water-energy nexus; however, its wide application is limited by detrimental cyanate or nitrite production instead of innocuous N2. Herein we demonstrate that atomically isolated asymmetric Ni-O-Ti sites on Ti foam anode achieve a N2 selectivity of 99%, surpassing the connected symmetric Ni-O-Ni counterparts in documented Ni-based electrocatalysts with N2 selectivity below 55%, and also deliver a H2 evolution rate of 22.0 mL h-1 when coupled to a Pt counter cathode under 213 mA cm-2 at 1.40 VRHE. These asymmetric sites, featuring oxygenophilic Ti adjacent to Ni, favor interaction with the carbonyl over amino groups in urea, thus preventing premature resonant C⎓N bond breakage before intramolecular N-N coupling towards N2 evolution. A prototype device powered by a commercial Si photovoltaic cell is further developed for solar-powered on-site urine processing and decentralized H2 production.

Stabilization of Lattice Oxygen Evolution Reactions in Oxophilic Ce-Mediated Bi/BiCeO1.8H Electrocatalysts for Efficient Anion Exchange Membrane Water Electrolyzers

The lattice oxygen mechanism (LOM) offers an efficient reaction pathway for oxygen evolution reactions (OERs) in energy storage and conversion systems. Owing to the involvement of active lattice oxygen enhancing electrochemical activity, addressing the structural and electrochemical stabilities of LOM materials is crucial. Herein, a heterostructure (Bi/BiCeO1.8H) containing abundant under-coordinated oxygen atoms having oxygen nonbonding states is synthesized by a simple electrochemical deposition method. Given the difference in reduction potentials between Bi and Ce, partially reduced Bi nanoparticles and surrounding under-coordinated oxygen atoms are generated in BiCeO1.8H. It is found that the lattice oxygen can be activated as a reactant of the OER when the valence state of Bi increases to Bi5+, leading to increased metal-oxygen covalency and that the oxophilic Ce3+/4+ redox couple can maintain the Bi nanoparticles and surrounding under-coordinated oxygen atoms by preventing over-oxidation of Bi. The anion exchange membrane water electrolyzer with Bi/BiCeO1.8H exhibits a low cell voltage of 1.79 V even at a high practical current density of 1.0 A cm-2. Furthermore, the cell performance remains significantly stable over 100 h with only a 2.2% increase in the initial cell voltage, demonstrating sustainable lattice oxygen redox.

Ultrathin Ni-Fe MOF Nanosheets: Efficient and Durable Water Oxidation at High Current Densities

Efficient, durable, and economical electrocatalysts are crucial for advancing energy technology by facilitating the oxygen evolution reaction (OER). Here, ultrathin Ni-Fe metal-organic skeleton (MOF) nanosheets were created in situ on nickel foam (NiFe-UMNs/NF). The catalyst exhibited excellent OER catalytical abilities, with only 269 mV overpotentials at 250 mA cm-2. Besides, when integrated with Pt/C/NF, NiFe-UMNs/NF held the potential for application in industrial alkaline water electrolysis with an initial voltage retention of approximately 86% following a continuous operation of 100 h at a current density of 250 mA cm-2. The super performance of the NiFe-UMNs/NF catalyst was attributed to ultrathin morphology, super hydrophilicity, and synergistic effects between Ni and Fe within the MOF. In situ Raman showed that NiFe-UMNs were converted to NiFeOOH as the active species in the OER process. Density functional theory revealed that iron doping accelerated the rate-determining step and reduced the OER reaction energy barrier. This work elucidated a promising electrocatalyst for OER and enriched the practical implementation of MOF materials.

Sulfur-Vacancy Engineering Accelerates Rapid Surface Reconstruction in Ni-Co Bimetal Sulfide Nanosheet for Urea Oxidation Electrocatalysis

Developing a highly efficient catalyst for electrocatalytic urea oxidation reaction (UOR) is not only beneficial for the degradation of urea pollutants in wastewater but also provides a benign route for hydrogen production. Herein, a sulfur-vacancy (Sv) engineering is proposed to accelerate the formation of metal (oxy)hydroxide on the surface of Ni-Co bimetal sulfide nanosheet arrays on nickel foam (Sv-CoNiS@NF) for boosting the urea oxidation electrocatalysis. As a result, the obtained Sv-CoNiS@NF demonstrates an outstanding electrocatalytic UOR performance, which requires a low potential of only 1.397 V versus the reversible hydrogen electrode to achieve the current density of 100 mA cm-2. The ex situ Raman spectra and density functional theory calculations reveal the key roles of the Sv site and Co9S8 in promoting the electrocatalytic UOR performance. This work provides a new strategy for accelerating the transformation of electrocatalysts to active metallic (oxy)hydroxide for urea electrolysis via engineering the surface vacancies.

Self-powered SnSx/TiO2 photodetectors (PDs) with dual-band binary response and the applications in imaging and light-encrypted logic gates

In this work, we report the design and fabrication of self-powered binary response PDs based on II-type heterostructures consisting of SnSx nanoflakes (NFs) and rutile TiO2 nanorod arrays (NRs). The TiO2 NRs effectively block light with wavelengths below 400 nm from reaching SnSx. Under 385 nm light, the photoelectrons in TiO2 recombine with holes in SnSx at the interface due to the energy band bending, resulting in a positive photocurrent. Under 410 nm light, the photoelectrons in SnSx and the photogenerated holes in TiO2 accumulate at the interface, overcoming the interfacial potential barriers induced by the higher Fermi levels of SnSx and inducing a negative photocurrent. Based on the bipolar response, the dual-band imaging capability without external filters and the light-encrypted OR, AND, and NOT logic gates using a single device are demonstrated. This work provides a blueprint for the development of multifunctional self-powered PDs that can simplify system architecture, reduce the energy consumption, and improve accuracy for applications, such as visual systems, light-controlled logic circuits, and encrypted optical communications.

Fe-Doped Ni2P/NiSe2 Composite Catalysts for Urea Oxidation Reaction (UOR) for Energy-Saving Hydrogen Production by UOR-Assisted Water Splitting

The development of efficient urea oxidation reaction (UOR) catalysts helps UOR replace the oxygen evolution reaction (OER) in hydrogen production from water electrolysis. Here, we prepared Fe-doped Ni2P/NiSe2 composite catalyst (Fe-Ni2P/NiSe2-12) by using phosphating-selenizating and acid etching to increase the intrinsic activity and active areas. Spectral characterization and theoretical calculations demonstrated that electrons flowed through the Ni-P-Fe-interface-Ni-Se-Fe, thus conferring high UOR activity to Fe-Ni2P/NiSe2-12, which only needed 1.39 V vs RHE to produce the current density of 100 mA cm-2. Remarkably, this potential was 164 mV lower than that required for the OER under the same conditions. Furthermore, EIS demonstrated that UOR driven by the Fe-Ni2P/NiSe2-12 exhibited faster interfacial reactions, charge transfer, and current response compared to OER. Consequently, the Fe-Ni2P/NiSe2-12 catalyst can effectively prevent competition with OER and NSOR, making it suitable for efficient hydrogen production in UOR-assisted water electrolysis. Notably, when water electrolysis is operated at a current density of 40 mA cm-2, this UOR-assisted system can achieve a decrease of 140 mV in the potential compared to traditional water electrolysis. This study presents a novel strategy for UOR-assisted water splitting for energy-saving hydrogen production.

Engineering advanced noble-metal-free electrocatalysts for energy-saving hydrogen production from alkaline water via urea electrolysis

When the anodic oxygen evolution reaction (OER) of water splitting is replaced by the urea oxidation reaction (UOR), the electrolyzer can fulfill hydrogen generation in an energy-economic manner for urea electrolysis as well as sewage purification. However, owing to the sluggish kinetics from a six-electron process for UOR, it is in great demand to design and fabricate high-performance and affordable electrocatalysts. Over the past years, numerous non-precious materials (especially nickel-involved samples) have offered huge potential as catalysts for urea electrolysis under alkaline conditions, even in comparison with frequently used noble-metal ones. In this review, recent efforts and progress in these high-efficiency noble-metal-free electrocatalysts are comprehensively summarized. The fundamentals and principles of UOR are first described, followed by highlighting UOR mechanism progress, and then some discussion about density functional theory (DFT) calculations and operando investigations is given to disclose the real reaction mechanism. Afterward, aiming to improve or optimize UOR electrocatalytic properties, various noble-metal-free catalytic materials are introduced in detail and classified into different classes, highlighting the underlying activity-structure relationships. Furthermore, new design trends are also discussed, including targetedly designing nanostructured materials, manipulating anodic products, combining theory and in situ experiments, and constructing bifunctional catalysts. Ultimately, we point out the outlook and explore the possible future opportunities by analyzing the remaining challenges in this booming field.

Modulation of Electronic Synergy to Enhance the Intrinsic Activity of Fe5Ni4S8 Nanosheets in Restricted Space Carbonized Wood Frameworks for Efficient Oxygen Evolution Reaction

Modulation of electronic structure and composition is widely recognized as an effective strategy to improve electrocatalyst performance. Herein, using a simple simultaneous carbonization and sulfidation strategy, NiFe double hydroxide-derived Fe5Ni4S8 (FNS) nanosheets immobilized on S-doped carbonized wood (SCW) framework by taking benefit of the orientation-constrained cavity and hierarchical porous structure of wood is proposed. Benefiting from the synergistic relationships between bimetal ions, the spatial confinement offered by the wood cavity, and the enhanced structural effects of the nanosheets array, the FNS/SCW exhibit enhanced intrinsic activity, increased accessibility of catalytically active sites, and convection-facilitated mass transport, resulting in an excellent oxygen evolution reaction (OER) activity and durability. Specifically, it takes a low overpotential of 230 mV at 50 mA cm-2 and potential increase is negligible (3.8%) at 50 mA cm-2 for 80 hours. Density functional theory (DFT) calculations further reveal that the synergistic effect of bimetal can optimize the electronic structure and lower the reaction energy barrier. The FNS/SCW used as the cathode of zinc-air battery shows higher power density and excellent durability relative to commercial RuO2, exhibiting a good application prospect. Overall, this research offers proposals for designing and producing effective OER electrocatalysts using sustainable resources.

Synergistic engineering of P, N-codoped carbon-confined bimetallic cobalt/nickel phosphides with tailored electronic structures for boosting urea electro-oxidation

Bimetallic phosphides exhibit superior electrocatalytic activities and synergistic effects that make them ideal electrocatalysts for the urea oxidation reaction (UOR). Herein, P, N-codoped carbon-encapsulated cobalt/nickel phosphides derived from NiCo-MOF-74 (NiCoP@PNC) and anchored on P-doped carbonized wood fiber (PCWF) for UOR were prepared through synchronous carbonization and phosphorization. By benefiting from the synergistic effect of structural and electronic modulation, NiCoP@PNC/PCWF exhibits excellent UOR electrocatalytic performance under alkaline conditions, achieving a current density of 50 mA cm-2 with a potential of only 1.34 V (vs reversible hydrogen electrode, RHE) and continuous operation for more than 72 h. In addition, for the overall urea splitting, an electrolyzer using UOR replaced OER, which required only 1.50 V to achieve a current density of 50 mA cm-2 with excellent stability, 230 mV less than that required for the HER||OER system. In-depth theoretical analysis further proves that the strong synergistic effect between Co and Ni optimizes electronic structures, yielding excellent UOR properties. The synergistic strategy of structural and electrical modulation provides broad prospects for the design and synthesis of excellent UOR electrocatalysts for energy-saving hydrogen production by using renewable resources.

Interfacial π-p Electron Coupling Prompts Hydrogen Evolution Reaction Activity in Acidic Electrolyte

The thermodynamically stable 2H-phase MoS2 is a brilliant material toward hydrogen evolution reaction (HER) owing to its excellent Gibbs free energy of hydrogen adsorption. Nevertheless, the poor intrinsic properties of 2H-MoS2 limit its electrocatalytic performances toward HER. In this work, graphitic carbon nitride covalently bridging 2H-MoS2 (MoS2/GCN) is proposed to construct robust HER electrocatalysts. The strong π-p electron coupling between the delocalized π electrons of GCN and the localized p electrons of S atoms sufficiently expose active sites and accelerate the reaction kinetics. To be specific, MoS2/GCN exhibits remarkable HER activity (160 mV at 10 mA·cm-2) and long-term durability. Importantly, MoS2/GCN also provides great potential for industrial application. Density functional theory (DFT) calculations disclose that the π-p electron coupling at the MoS2/GCN interface regulates the electronic structure of S atoms, consequently providing enhanced HER performance. This work presents a feasible pathway to develop advanced electrocatalysts for energy conversions.

Fe-Based Metal Organic Framework-Derived FeNiP/N-Doped Carbon Heterogeneous Core-Shell Structures for Oxygen Evolution

It is of great significance to explore high activity, low overpotential, and outstanding durability electrocatalysts without precious metals for oxygen evolution reaction to reduce the energy consumption in the electrolysis of water to product hydrogen. Metal organic frameworks (MOFs) with periodic structure and uniform pore distribution have been widely used as precursors for the synthesis of transition metal electrocatalysts. Herein, we first synthesized nanoscale Fe-soc-MOFs with relatively high specific surface area and in situ converted it into nickel-iron double layer hydroxide/MOF (FeNi LDH/MOF) by Ni2+ etching. Finally, a nickel-iron phosphide/nitrogen-doped carbon cubic nanocage (FeNiP/NC) was obtained by calcination and phosphating. FeNiP/NC with its unique core-shell structure has an overpotential of only 240 mV at a current density of 10 mA/cm2 and can be continuously electrolyzed for 45 h. High catalytic activity of FeNiP/NC is mainly attributed to the action of Fe and Ni bimetals and the synergistic effect between FeNiP and N-doped porous carbon, which was confirmed by the calculation of density functional theory (i.e., Gibbs free energy). After a long period of electrolysis, FeNiP was converted to MOOH (M = Fe and Ni) and became the new active site. This study provides a feasible optimization strategy for the development of high-efficiency three-dimensional electrode materials without precious metals.

Manipulating the Microenvironment of Single Atoms by Switching Support Crystallinity for Industrial Hydrogen Evolution

Modulating the microenvironment of single-atom catalysts (SACs) is critical to optimizing catalytic activity. Herein, we innovatively propose a strategy to improve the local reaction environment of Ru single atoms by precisely switching the crystallinity of the support from high crystalline and low crystalline, which significantly improves the hydrogen evolution reaction (HER) activity. The Ru single-atom catalyst anchored on low-crystalline nickel hydroxide (Ru-LC-Ni(OH)2 ) reconstructs the distribution balance of the interfacial ions due to the activation effect of metal dangling bonds on the support. Single-site Ru with a low oxidation state induces the aggregation of hydronium ions (H3 O+ ), leading to the formation of a local acidic microenvironment in alkaline media, breaking the pH-dependent HER activity. As a comparison, the Ru single-atom catalyst anchored on high-crystalline nickel hydroxide (Ru-HC-Ni(OH)2 ) exhibits a sluggish Volmer step and a conventional local reaction environment. As expected, Ru-LC-Ni(OH)2 requires low overpotentials of 9 and 136 mV at 10 and 1000 mA cm-2 in alkaline conditions and operates stably at 500 mA cm-2 for 500 h in an alkaline seawater anion exchange membrane (AEM) electrolyzer. This study provides a new perspective for constructing highly active single-atom electrocatalysts.

Urea catalytic oxidation for energy and environmental applications

Urea is one of the most essential reactive nitrogen species in the nitrogen cycle and plays an indispensable role in the water-energy-food nexus. However, untreated urea or urine wastewater causes severe environmental pollution and threatens human health. Electrocatalytic and photo(electro)catalytic urea oxidation technologies under mild conditions have become promising methods for energy recovery and environmental remediation. An in-depth understanding of the reaction mechanisms of the urea oxidation reaction (UOR) is important to design efficient electrocatalysts/photo(electro)catalysts for these technologies. This review provides a critical appraisal of the recent advances in the UOR by means of both electrocatalysis and photo(electro)catalysis, aiming to comprehensively assess this emerging field from fundamentals and materials, to practical applications. The emphasis of this review is on the design and development strategies for electrocatalysts/photo(electro)catalysts based on reaction pathways. Meanwhile, the UOR in natural urine is discussed, focusing on the influence of impurity ions. A particular emphasis is placed on the application of the UOR in energy and environmental fields, such as hydrogen production by urea electrolysis, urea fuel cells, and urea/urine wastewater remediation. Finally, future directions, prospects, and remaining challenges are discussed for this emerging research field. This critical review significantly increases the understanding of current progress in urea conversion and the development of a sustainable nitrogen economy.

Ambient γ-Rays-Mediated Noble-Metal Deposition on Defect-Rich Manganese Oxide for Glycerol-Assisted H2 Evolution at Industrial-Level Current Density

Developing novel synthesis technologies is crucial to expanding bifunctional electrocatalysts for energy-saving hydrogen production. Herein, we report an ambient and controllable γ-ray radiation reduction to synthesize a series of noble metal nanoparticles anchored on defect-rich manganese oxides (M@MnO2-x , M=Ru, Pt, Pd, Ir) for glycerol-assisted H2 evolution. Benefiting from the strong penetrability of γ-rays, nanoparticles and defect supports are formed simultaneously and bridged by metal-oxygen bonds, guaranteeing structural stability and active site exposure. The special Ru-O-Mn bonds activate the Ru and Mn sites in Ru@MnO2-x through strong interfacial coordination, driving glycerol electrolysis at low overpotential. Furthermore, only a low cell voltage of 1.68 V is required to achieve 0.5 A cm-2 in a continuous-flow electrolyzer system along with excellent stability. In situ spectroscopic analysis reveals that the strong interfacial coordination in Ru@MnO2-x balances the competitive adsorption of glycerol and OH* on the catalyst surface. Theoretical calculations further demonstrate that the defect-rich MnO2 support promotes the dissociation of H2 O, while the defect-regulated Ru sites promote deprotonation and hydrogen desorption, synergistically enhancing glycerol-assisted hydrogen production.

Regulating the Innocuity of Urea Electro-Oxidation via Cation-mediated Adsorption

Urea electrolysis is an emerging technology that bridges efficient wastewater treatment and hydrogen production with lower electricity costs. However, conventional Ni-based catalysts could easily overoxidize urea into the secondary contaminant NOx - , and enhancing the innocuity of urea electrolysis remains a grand challenge to be achieved. Herein, we tailored the electrode-electrolyte interface of an unconventional cation effect on the anodic oxidation of urea to regulate its activity and selectivity. Smaller cations of Li+ were discovered to increase the Faradaic efficiency (FE) of the innocuous N2 product from the standard value of ~15 % to 45 %, while decreasing the FEs of the over-oxidized NOx - product from ~80 % to 46 %, pointing to a more sustainable process. The kinetic and computational analysis revealed the dominant residence of cations on the outer Helmholtz layer, which forms the interactions with the surface adsorbates. The Li+ hydration shells and rigid hydrogen bonding network interact strongly with the adsorbed urea to decrease its adsorption energy and subjection to C-N cleavage, thereby directing it toward the N2 pathway. This work emphasizes the tuning of the interactions within the electrode-electrolyte interface for enhancing the efficiency and sustainability of electrocatalytic processes.

Interfacial Electron Regulation and Composition Evolution of NiFe/MoC Heteronanowire Arrays for Highly Stable Alkaline Seawater Oxidation

In alkaline seawater electrolysis, the oxygen evolution reaction (OER) is greatly suppressed by the occurrence of electrode corrosion due to the formation of hypochlorite. Herein, a catalyst consisting of MoC nanowires modified with NiFe alloy nanoparticles (NiFe/MoC) on nickel foam (NF) is prepared. The optimized catalyst can deliver a large current density of 500 mA cm-2 at a very low overpotential of 366 mV in alkaline seawater, respectively, outperforming commercial IrO2 . Remarkably, an electrolyzer assembled with NiFe/MoC/NF as the anode and NiMoN/NF as the cathode only requires 1.77 V to drive a current density of 500 mA cm-2 for alkaline seawater electrolysis, as well as excellent stability. Theory calculation indicates that the initial activity of NiFe/MoC is attributed to increased electrical conductivity and decreased energy barrier for OER due to the introduction of Fe. We find that the change of the catalyst in the composition occurred after the stability test; however, the reconstructed catalyst has an energy barrier close to that of the pristine one, which is responsible for its excellent long-term stability. Our findings provide an efficient way to construct high-performance OER catalysts for alkaline seawater splitting.

Cation Concavities Induced d-Band Electronic Modulation on Co/FeOx Nanostructure to Activate Molecular and Interfacial Oxygen for CO Oxidation

Cobalt-based catalysts have been identified for effective CO oxidation, but their activity is limited by molecular O2 and interfacial oxygen passivation at low temperatures. Optimization of the d-band structure of the cobalt center is an effective method to enhance the dissociation of oxygen species. Here, we developed a novel Co/FeOx catalyst based on selective cationic deposition to anchor Co cations at the defect site of FeOx, which exhibited superior intrinsic low-temperature activity (100%, 115 °C) compared to that of Pt/Co3O4 (100%, 140 °C) and La/Co2O3 (100%, 150 °C). In contrast to catalysts with oxygen defects, the cationic Fe defect in Co/FeOx showed an exceptional ability to accept electrons from the Co 3d orbital, resulting in significant electron delocalization at the Co sites. The Co/FeOx catalyst exhibited a remarkable turnover frequency of 178.6 per Co site per second, which is 2.3 times higher than that of most previously reported Co-based catalysts. The d-band center is shifted upward by electron redistribution effects, which promotes the breaking of the antibonding orbital *π of the O═O bond. In addition, the controllable regulation of the Fe-Ov-Co oxygen defect sites enlarges the Fe-O bond from 1.97 to 2.02 Å to activate the lattice oxygen. Moreover, compared to CoxFe3-xO4, Co/FeOx has a lower energy barrier for CO oxidation, which significantly accelerates the rate-determining step, *COO formation. This study demonstrates the feasibility of modulating the d-band structure to enhance O2 molecular and interfacial lattice oxygen activation.

Enhancement of Pt-O Synergistic Sites through Titanium Vacancies for Low-Temperature Nitrogen Oxide Reduction

Improving the reaction rate of each step is significant for accelerating the multistep reaction of NO reduction by H2. However, simultaneously enhancing the activation of different gaseous reactants using single-atom catalysts remains a challenge to maximize the activity. Herein, we propose a strategy that utilizes titanium-vacancy-regulated electronic properties of single atoms and defective support (Pt1/d-TiO2) to facilitate electron transfer from edge-share O atoms (OTi) to adjacent Pt single atoms. This leads to the formation of low-valence Pt and unsaturated-charge OTi sites, which causes the catalytic reaction to follow a synergistic mechanism. Specifically, experimental and theoretical analyses demonstrate that low-valence Pt sites finely tune the adsorption of H2 molecules, consequently lowering the dissociation energy from 0.15 to as low as 0.01 eV. Moreover, using quasi-in situ spectroscopy, we clearly observe NO molecules being adsorbed on interfacial oxygen sites of a defective support. Then, the bond energy of the N-O bond is weakened through an electron acceptance-donation mechanism between unsaturated-charge OTi sites and NO, thereby facilitating NO activation. The designed single-atom catalysts with synergistic sites exhibit unmatched activity at low temperatures (above 90% NOx conversion at 100 °C), along with higher turnover frequency value (0.74 s-1) and superior stability, making them potentially suitable for industrial applications.

Stabilizing Low-Valence Single Atoms by Constructing Metalloid Tungsten Carbide Supports for Efficient Hydrogen Oxidation and Evolution

Designing novel single-atom catalysts (SACs) supports to modulate the electronic structure is crucial to optimize the catalytic activity, but rather challenging. Herein, a general strategy is proposed to utilize the metalloid properties of supports to trap and stabilize single-atoms with low-valence states. A series of single-atoms supported on the surface of tungsten carbide (M-WCx , M=Ru, Ir, Pd) are rationally developed through a facile pyrolysis method. Benefiting from the metalloid properties of WCx , the single-atoms exhibit weak coordination with surface W and C atoms, resulting in the formation of low-valence active centers similar to metals. The unique metal-metal interaction effectively stabilizes the low-valence single atoms on the WCx surface and improves the electronic orbital energy level distribution of the active sites. As expected, the representative Ru-WCx exhibits superior mass activities of 7.84 and 62.52 A mgRu -1 for the hydrogen oxidation and evolution reactions (HOR/HER), respectively. In-depth mechanistic analysis demonstrates that an ideal dual-sites cooperative mechanism achieves a suitable adsorption balance of Had and OHad , resulting in an energetically favorable Volmer step. This work offers new guidance for the precise construction of highly active SACs.

Unlocking the Transition of Electrochemical Water Oxidation Mechanism Induced by Heteroatom Doping

Heteroatom doping has emerged as a highly effective strategy to enhance the activity of metal-based electrocatalysts toward the oxygen evolution reaction (OER). It is widely accepted that the doping does not switch the OER mechanism from the adsorbate evolution mechanism (AEM) to the lattice-oxygen-mediated mechanism (LOM), and the enhanced activity is attributed to the optimized binding energies toward oxygen intermediates. However, this seems inconsistent with the fact that the overpotential of doped OER electrocatalysts (<300 mV) is considerably smaller than the limit of AEM (>370 mV). To determine the origin of this inconsistency, we select phosphorus (P)-doped nickel-iron mixed oxides as the model electrocatalysts and observe that the doping enhances the covalency of the metal-oxygen bonds to drive the OER pathway transition from the AEM to the LOM, thereby breaking the adsorption linear relation between *OH and *OOH in the AEM. Consequently, the obtained P-doped oxides display a small overpotential of 237 mV at 10 mA cm-2 . Beyond P, the similar pathway transition is also observed on the sulfur doping. These findings offer new insights into the substantially enhanced OER activity originating from heteroatom doping.

Boosting urea electrooxidation on oxyanion-engineered nickel sites via inhibited water oxidation

Renewable energy-based electrocatalytic oxidation of organic nucleophiles (e.g.methanol, urea, and amine) are more thermodynamically favourable and, economically attractive to replace conventional pure water electrooxidation in electrolyser to produce hydrogen. However, it is challenging due to the competitive oxygen evolution reaction under a high current density (e.g., >300 mA cm-2), which reduces the anode electrocatalyst's activity and stability. Herein, taking lower energy cost urea electrooxidation reaction as the model reaction, we developed oxyanion-engineered Nickel catalysts to inhibit competing oxygen evolution reaction during urea oxidation reaction, achieving an ultrahigh 323.4 mA cm-2 current density at 1.65 V with 99.3 ± 0.4% selectivity of N-products. In situ spectra studies reveal that such in situ generated oxyanions not only inhibit OH- adsorption and guarantee high coverage of urea reactant on active sites to avoid oxygen evolution reaction, but also accelerate urea's C - N bond cleavage to form CNO - intermediates for facilitating urea oxidation reaction. Accordingly, a comprehensive mechanism for competitive adsorption behaviour between OH- and urea to boost urea electrooxidation and dynamic change of Ni active sites during urea oxidation reaction was proposed. This work presents a feasible route for high-efficiency urea electrooxidation reaction and even various electrooxidation reactions in practical applications.

Ultrafine Electrospun Cobalt-Molybdenum Bimetallic Nitride as a Durable Electrocatalyst for Hydrogen Evolution

Transition metal nitrides are promising electrocatalysts for hydrogen evolution reaction (HER) owing to their Pt-like electronic structure. However, the harsh nitriding conditions greatly limit their large-scale applications. Herein, ultrafine Co₃Mo₃N-Mo₂C (<1 nm)-decorated carbon nanofibers (Co₃Mo₃N-Mo₂C/CNFs) were prepared by electrostatic spinning followed by pyrolysis treatment, in which the MoCo-MOF simultaneously serves as the precursor and nitrogen source. The generated synergistic interactions between Mo₂C and Co₃Mo₃N significantly adjust the electronic structure of Mo₂C and afford a fast charge transfer, which endows the resultant hybrid with superior HER electrocatalytic performances. Specifically, the as-obtained Co₃Mo₃N-Mo₂C/CNF delivers a low overpotential of only 76 mV to achieve a current density of 10 mA cm^-2 and superior durability with no obvious degradation for 200 h in acidic media. This performance outperforms most of the transition metal-based electrocatalysts reported to date. This work paves a new way for the design of catalysts with ultrasmall size and high efficiency in energy conversion.

Construction of an Advanced NiFe-LDH/MoS2-Ni3S2/NF Heterostructure Catalyst toward Efficient Electrocatalytic Overall Water Splitting

Developing high-efficiency, low-cost, and earth-abundant electrocatalysts toward the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER) is highly desirable for boosting the energy efficiency of water splitting. Herein, we adopted an interfacial engineering strategy to enhance the overall water splitting (OWS) activity via constructing a bifunctional OER/HER electrocatalyst combining MoS₂-Ni₃S₂ with NiFe layered double hydroxide (NiFe-LDH) on a nickel foam substrate. The NiFe-LDH/MoS₂-Ni₃S₂/NF electrocatalyst delivers superior OER/HER activity and stability, such as low overpotentials (220 and 79 mV for OER and HER at current densities of 50 and 10 mA cm^-2, respectively) and a low Tafel slope. This excellent electrocatalytic performance mainly benefits from the electronic structure modulation and synergistic effects between NiFe-LDH and MoS₂-Ni₃S₂, which provides a high electrochemical activity area, more active sites, and strong electron interaction. Furthermore, the assembly of NiFe-LDH/MoS₂-Ni₃S₂/NF into a two-electrode system only requires an ultra-low cell voltage of 1.50 V at a current density of 10 mA cm^-2 and exhibits outstanding stability with a decay of current density of only 2.11% @50 mA cm^-2 after 50 h, which is far superior to numerous other reported transition metal NiFe-LDH and MoS₂-Ni₃S₂-based as well as RuO₂||Pt-C electrocatalysts. This research highlights the rational design of heterostructures to efficiently advance electrocatalysis for water splitting applications.

Nano-Polycrystalline Cu Layer Interlaced with Ti3+-Self-Doped TiO2 Nanotube Arrays as an Electrocatalyst for Reduction of Nitrate to Ammonia

The electrochemical nitrate reduction reaction (NO₃RR) is considered as a promising strategy to degrade nitrate-containing wastewater and synthesize recyclable ammonia at atmospheric pressure and room temperature. In this work, the copper oxides-derived nano-polycrystalline Cu (NPC Cu) was integrated with Ti³⁺-self-doped TiO₂ nanotube arrays (NTA) to fabricate the NPC Cu/H-TiO₂ NTA. Ti³⁺-self-doped TiO₂ NTAs and the NPC Cu facilitate electron transfer and mass transportation and create abundant active sites. The unique nanostructure in which Cu nano-polycrystals interlace with the TiO₂ nanotube accelerates the electron transfer from the substrate to surface NPC Cu. The density functional theory calculations confirm that the built-in electric field between Cu and TiO₂ improves the adsorption characteristic of the NPC Cu/H-TiO₂ NTA, thereby converting the endothermic NO₃^- adsorption step into an exothermic process. Therefore, the high NO₃^- conversion of 98.97%, the Faradic efficiency of 95.59%, and the ammonia production yield of 0.81 mg cm^-2 h^-1 are achieved at -0.45 V vs reversible hydrogen electrode in 10 mM NaNO₃ (140 mg L^-1)-0.1 M Na₂SO₄. This well-designed NPC Cu/H-TiO₂ NTA as an effective electrocatalyst for the 8e^- NO₃RR possesses promising potential in the applications of ammonia production.

Ni-Doped MnO2 Nanosheet Arrays for Efficient Urea Oxidation

Urea oxidation reaction (UOR), with a low thermodynamic potential, offers great promise for replacing anodic oxygen evolution reaction of electrolysis systems such as water splitting, carbon dioxide reduction, etc., thus reducing the overall energy consumption. To promote the sluggish kinetics of UOR, highly efficient electrocatalysts are required, and Ni-based materials have been widely investigated. However, most of these reported Ni-based catalysts suffer from large overpotentials, as they generally undergo self-oxidation to form NiOOH species at high potentials, which act as catalytically active sites for UOR. Herein, Ni-doped MnO₂ (Ni-MnO₂) nanosheet arrays were successfully prepared on nickel foam. The as-fabricated Ni-MnO₂ shows distinct UOR behavior with most of the previously reported Ni-based catalysts, as urea oxidation on Ni-MnO₂ proceeds before the formation of NiOOH. Notably, a low potential of 1.388 V vs reversible hydrogen electrode was required to achieve a high current density of 100 mA cm^-2 on Ni-MnO₂. It is suggested that both Ni doping and nanosheet array configuration are responsible for the high UOR activities on Ni-MnO₂. The introduction of Ni modifies the electronic structure of Mn atoms, and more Mn³⁺ species are generated in Ni-MnO₂, contributing to its outstanding UOR performance.

Charge-Polarized Selenium Vacancy in Nickel Diselenide Enabling Efficient and Stable Electrocatalytic Conversion of Oxygen to Hydrogen Peroxide

Vacancy engineering is deemed as one of the powerful protocols to tune the catalytic activity of electrocatalysts. Herein, Se-vacancy with charge polarization is created in the NiSe₂ structure (NiSe₂ -V_Se ) via a sequential phase conversion strategy. By a combined analysis of the Rietveld method, transient photovoltage spectra (TPV), in situ Raman and density functional theory (DFT) calculation, it is unequivocally discovered that the presence of charge-polarized Se-vacancy is beneficial for stabilizing the structure, decreasing the electron transfer kinetics, as well as optimizing the free adsorption energy of reaction intermediate during two-electron oxygen reduction reaction (2e^- ORR). Benefiting from these merits, the as-prepared NiSe₂ -V_Se delivered the highest selectivity of 96% toward H₂ O₂ in alkaline media, together with a selectivity higher than 90% over the wide potential range from 0.25 to 0.55 V, ranking it in the top level among the previously reported transition metal-based electrocatalysts. Most notably, it also displayed admirable stability with only a slight selectivity decay after 5000 cycles of accelerated degradation test (ADT).

Formation and Stabilization of NiOOH by Introducing α-FeOOH in LDH: Composite Electrocatalyst for Oxygen Evolution and Urea Oxidation Reactions

NiOOH is considered as the most active intermediate during electrochemical oxidation reaction, however, it is hard to directly synthesize due to high oxidation energy. Herein, theoretical calculations predict that α-FeOOH enables a decline in formation energy and an improvement in stabilization of NiOOH in NiFe-based layered double hydroxide (LDH). Inspiringly, a composite composed of α-FeOOH and LDH is well-designed and successfully fabricated in hydrothermal treatment by adding extra Fe³⁺ resource, and stable NiOOH is obtained by the following electro-oxidation method. Benefiting from strong electron-capturing capability of α-FeOOH, it efficiently promotes charge redistribution around the Ni/Fe sites and activates Ni atoms of LDH, verified by X-ray photoelectron spectra (XPS) and X-ray absorption spectra (XAS). The d-band center is optimized that balances the absorption and desorption energy, and thus Gibbs free energy barrier is lowered dramatically toward oxygen evolution reaction (OER) and urea oxidation reaction (UOR), and finally showing an outstanding overpotential of 195 mV and a potential of 1.35 V at 10 mA cm^-2 , respectively. This study provides a novel strategy to construct highly efficient catalysts via the introduction of a new phase for complex multiple-electron reactions.

Etching-Induced Surface Reconstruction of NiMoO4 for Oxygen Evolution Reaction

Rational reconstruction of oxygen evolution reaction (OER) pre-catalysts and performance index of OER catalysts are crucial but still challenging for universal water electrolysis. Herein, we develop a double-cation etching strategy to tailor the electronic structure of NiMoO4, where the prepared NiMoO4 nanorods etched by H2O2 reconstruct their surface with abundant cation deficiencies and lattice distortion. Calculation results reveal that the double cation deficiencies can make the upshift of d-band center for Ni atoms and the active sites with better oxygen adsorption capacity. As a result, the optimized sample (NMO-30M) possesses an overpotential of 260 mV at 10 mA cm-2 and excellent long-term durability of 162 h. Importantly, in situ Raman test reveals the rapid formation of high-oxidation-state transition metal hydroxide species, which can further help to improve the catalytic activity of NiMoO4 in OER. This work highlights the influence of surface remodification and shed some light on activating catalysts.

Effect of Proton Transfer on Electrocatalytic Water Oxidation by Manganese Phosphates

The effect of proton transfer on water oxidation has hardly been measurably established in heterogeneous electrocatalysts. Herein, two isomorphous manganese phosphates (NH₄ MnPO₄  ⋅ H₂ O and KMnPO₄  ⋅ H₂ O) were designed to form an ideal platform to study the effect of proton transfer on water oxidation. The hydrogen-bonding network in NH₄ MnPO₄  ⋅ H₂ O has been proven to be solely responsible for its better activity. The differences of the proton transfer kinetics in the two materials indicate a fast proton hopping transfer process with a low activation energy in NH₄ MnPO₄  ⋅ H₂ O. In addition, the hydrogen-bonding network can effectively promote the proton transfer between adjacent Mn sites and further stabilize the Mn^III -OH intermediates. The faster proton transfer results in a higher proportion of zeroth-order in [H⁺ ] for OER. Thus, proton transfer-affected electrocatalytic water oxidation has been measurably observed to bring detailed insights into the mechanism of water oxidation.

Cationic defect-enriched hydroxides as anodic catalysts for efficient seawater electrolysis

A porous NiFe LDH with abundant cationic defects was synthesized to optimize interactions between active Ni species and adsorbates, exhibiting a highly efficient seawater electrolysis performance.

Single-step salt-template-based scalable production of 2D carbon sheets heterostructured with nickel nanocatalysts for lowering overpotential of hydrogen evolution reaction

Non-precious metals have been considered as suitable alternatives for high-performance hydrogen evolution reactions (HER). Although the incorporation of carbon substances is shown to improve the number of active sites, electron transfer pathways, and long-term stability, there have been rare reports on their single-step scalable production. Herein, we realize free-standing two-dimensional (2D) carbon sheets heterostructured with nickel (Ni) nanocatalysts by pyrolyzing ultrathin layers of acetate tetrahydrate (i.e. the single precursor for both Ni and C sources) over water-soluble salt crystals. Such a salt-templated methodology is environmentally friendly and readily scalable without the implementation of sophisticated equipment. The resulting 2D carbon sheets exhibit an average small thickness of ∼ 3 nm and lateral dimensions with tens of micrometers, where a large number of nano-sized Ni particles with an average diameter of 14 nm are uniformly dispersed. Such 2D Ni-C sheets demonstrate a small overpotential of 111 mV at 10 mA/cm2 and a low Tafel slope of 86 mV/dec for HER in 1 M KOH, which is significantly improved over those of reported non-precious metals composited with carbon substances. This work offers new insight into the design and practical production of non-precious metal matrixes for economical HER.

UV-Visible-Near-Infrared-Driven Photoelectrocatalytic Urea Oxidation and Photocatalytic Urea Fuel Cells Based on Ruddlensden–Popper-Type Perovskite Oxide La2NiO4

Photocatalysis and photoelectrocatalysis, as green and low-cost pollutant treatment technologies, have been widely used to simultaneously degrade pollutants and produce clean energy to solve the problems of environmental pollution and energy crisis. However, the disadvantages of photocatalysts in a narrow absorption range and low utilization rate of solar energy still hinder the practical application. Here we fabricate two-dimensional porous Ruddlensden–Popper type nickel-based perovskite oxide La2NiO4 as a noble metal-free photoanode for photoelectrocatalytic urea oxidation under full spectrum sunlight irradiation. The transient photocurrent density under near infrared (NIR) light (λ > 800 nm) can reach 50 μA cm−2. Urea wastewater was used as the fuel to obtain low-energy hydrogen production, and round-the-clock hydrogen production was achieved with the optimal yield of 22.76 μmol cm−2 h−1. Moreover, a photocatalytic urea fuel cell (PUFC) was constructed with La2NiO4 as the photoanode. The power density under UV-vis-NIR was 0.575 μW cm−2. Surprisingly, the filling factor (FF) under NIR light was 0.477, which was much higher than those under UV-vis-NIR and visible light. The results demonstrated that PUFCs constructed from low-cost nickel-based perovskite oxides have potential applications for low-energy hydrogen production and efficient utilization of sunlight.

Ni-Doped CuO Nanoarrays Activate Urea Adsorption and Stabilizes Reaction Intermediates to Achieve High-Performance Urea Oxidation Catalysts

Urea oxidation reaction (UOR) with a low equilibrium potential offers a promising route to replace the oxygen evolution reaction for energy-saving hydrogen generation. However, the overpotential of the UOR is still high due to the complicated 6e^- transfer process and adsorption/desorption of intermediate products. Herein, utilizing a cation exchange strategy, Ni-doped CuO nanoarrays grown on 3D Cu foam are synthesized. Notably, Ni-CuO NAs/CF requires a low potential of 1.366 V versus a reversible hydrogen electrode to drive a current density of 100 mA cm^-2 , outperforming various benchmark electrocatalysts and maintaining robust stability in alkaline media. Theoretical and experimental studies reveal that Ni as the driving force center can effectively enhance the urea adsorption and stabilize CO*/NH* intermediates toward the UOR. These findings suggest a new direction for constructing nanostructures and modulating electronic structures, ultimately developing promising Cu-based electrode catalysts.

Ethanol-Induced Hydrogen Insertion in Ultrafine IrPdH Boosts pH-Universal Hydrogen Evolution

Engineering Pt-free catalysts for hydrogen evolution reaction (HER) with high activity and stability is of great significance in electrochemical hydrogen production. Herein, in situ chemical H intercalation into ultrafine Pd to activate this otherwise HER-inferior material to form the ultrafine IrPdH hydride as an efficient and stable HER electrocatalyst is proposed. The formation of PdIrH depends on a new hydrogenation strategy via using ethanol as the hydrogen resource. It is demonstrated that H atoms in IrPdH originate from the OH and CH₂  of ethanol, which fills the gap of ethanol as the hydrogen source for the preparation of Pd hydride. Thanks to the incorporation of H/Ir atoms and ultrafine structure, the IrPdH exhibits superior HER activity and stability in the whole pH range. The IrPdH delivers very low overpotentials of 14, 25 and 60 mV at a current density of 10 mA cm^-2 respectively in 0.5 m H₂ SO₄ , 1 m KOH, and 1 m PBS electrolytes, which are much better than those of commercial Pt/C and most reported noble metal electrocatalysts. Theoretical calculations confirm that interstitial hydrogen availably refines the electronic density of Pd and Ir sites, which optimizes the adsorption of *H and leads to the significant enhancement of HER performance.

Surface Activation and Ni-S Stabilization in NiO/NiS2 for Efficient Oxygen Evolution Reaction

Manipulating the active species and improving the structural stabilization of sulfur-containing catalysts during the OER process remain a tremendous challenge. Herein, we constructed NiO/NiS₂ and Fe-NiO/NiS₂ as catalyst models to study the effect of Fe doping. As expected, Fe-NiO/NiS₂ exhibits a low overpotential of 270 mV at 10 mA cm^-2 . The accumulation of hydroxyl groups on the surface of materials after Fe doping can promote the formation of highly active NiOOH at a lower OER potential. Moreover, we investigated the level of corrosion of M-S bonds and compared the stability variation of M-S bonds with Fe at different locations. Interestingly, Fe bonded with S in the bulk as the sacrificial agent can alleviate the oxidation corrosion of partial Ni-S bonds and thus endow Fe-NiO/NiS₂ long-term durability. This work could motivate the community to focus more on resolving the corrosion of sulfur-containing materials.

N-Doped Carbon as a Promoted Substrate for Ir Nanoclusters toward Hydrogen Oxidation in Alkaline Electrolytes

Development of effective electrocatalysts toward hydrogen oxidation with a low content of noble metals has attracted the attention of the catalytic community. In this work, a novel catalyst composed of nitrogen-doped carbon acting as the substrate and Ir nanoclusters as active species was prepared, which was then employed as an effective catalyst for the hydrogen oxidation reaction (HOR) in an alkaline electrolyte. In 0.1 M KOH, the optimized catalyst provides an exchange current density of 0.144 mA cm_Ir^-2 for HOR that outperforms the catalytic activity of the commercial Pt/C catalyst with a Pt content of 20 wt %. The substrate induces highly active Ir sites that markedly boosted the electrocatalytic activity for HOR. The nitrogen-doped carbon substrate increases the stability of Ir nanoclusters and decreases the absorption energy of hydrogen on Ir sites; at the same time, the higher electrostatic potential around the adsorbed hydrogen on Ir/N-doped carbon also enables them to be easily attracted by OH^- species, both of which enhanced the catalytic activity. The excellent catalytic activity and the understanding shown here will give some hints for the development of HOR catalysts used in alkaline electrolytes.

Construction of NiS/Ni3S4 heteronanorod arrays in graphitized carbonized wood frameworks as versatile catalysts for efficient urea-assisted water splitting

Exploring highly efficient, robust, and stable catalysts for urea electrolysis is intensively desirable for hydrogen production but remains a challenging task. In this work, novel, well-aligned, self-supported NiS/Ni₃S₄ heteronanorod arrays deposited on graphitized carbonized wood (GCW) are designed (denoted as NiS/Ni₃S₄/GCW) and synthesized by a facile hydrothermal sulfidation strategy. Benefitting from the optimized surface hydrophilicity/aerophobicity, enhanced electrical conductivity, and 3D hierarchical directional porous architectures, the NiS/Ni₃S₄/GCW show excellent activity toward the urea oxidation reaction and hydrogen evolution reaction in alkaline electrolytes. The arrays achieved a low potential of 1.33 V (vs. RHE) and 91 mV (overpotential) at 10 mA cm^-2 as well as robust stability for 100 h. Significantly, when employed as anode and cathode simultaneously, the urea electrolyzer constructed by NiS/Ni₃S₄/GCW catalysts merely requires a low voltage of 1.44 V to drive 10 mA cm^-2 with superior stability for 50 h. This work not only demonstrates the application of heterogeneous sulfide for urea-assisted hydrogen production but also provides an effective guideline for using renewable wood for designing efficient catalysts in an economical way.