Morphology Optimization of the Photoactive Layer through Crystallinity and Miscibility Regulation for High-performance Polymer Solar Cells

Regulation of organic solar cells performance through external electric field: From charge transfer mechanisms to photovoltaic properties

In organic solar cells (OSCs), comprehending the charge transfer mechanism at D/A interfaces is crucial for photoinduced charge generation and enhancing power conversion efficiency (PCE). The charge transfer mechanism and photovoltaic performance of the parallel stacking interface configuration of the PTQ10 polymer donor and T2EH non-fullerene acceptor (NFA) are systematically studied at the microscopic scale. The analysis of the electron-hole distribution of the PTQ10/T2EH excited states revealed the presence of multiple charge excitation modes and charge transfer pathways. Using Marcus theory, we examine the charge separation rate (KCS) of PTQ10/T2EH under external electric field (Fext) modulation, and it is clarified that reorganization energy (λ) is the main factor that affects the KCS. Our results show that Fext has a positive impact on the photovoltaic properties of PTQ10/T2EH thin films, as evidenced by the modulation of the open circuit voltage (VOC), voltage loss (VLOSS) and fill factor (FF). Overall, this study provides valuable theoretical insights for Fext to accelerate the charge separation process and enhance photovoltaic efficiency.

Utilization of Polycyclic Aromatic Solid Additives for Morphology and Thermal Stability Enhancement in Photoactive Layers of Organic Solar Cells

Volatile solid additives have emerged as a promising strategy for enhancing film morphology and promoting the power conversion efficiency (PCE) of organic solar cells (OSCs). Herein, a series of novel polycyclic aromatic additives with analogous chemical structures, including fluorene (FL), dibenzothiophene (DBT), and dibenzofuran (DBF) derived from crude oils, are presented and incorporated into OSCs. All these additives exhibit strong interactions with the electron-deficient terminal groups of L8-BO within the bulk-heterojunction OSCs. Moreover, they demonstrate significant sublimation during thermal annealing, leading to increase free volumes for the rearrangement and recrystallization of L8-BO. This phenomenon leads to an improved film morphology and an elevated glass-transition temperature of the photoactive layers. Consequently, the PCE of the PM6:L8-BO blend has been boosted from 16.60% to 18.60% with 40 wt% DBF additives, with a champion PCE of 19.11% achieved for ternary PM6:L8-BO:BTP-eC9 OSCs. Furthermore, the prolonged shelf and thermal stability have been observed in OSCs with these additives. This study emphasizes the synergic effect of volatile solid additives on the performance and thermal stability of OSCs, highlighting their potential for advancing the field of photovoltaics.

Impact of Alkoxy Side Chains on the Quinoxaline-Based Electron Acceptors for Efficient Organic Solar Cells

In this work, three alkoxy-substituted quinoxaline core-based small-molecule acceptors (BQO-F, BQDO-F, and BQDO-Cl) are developed to elucidate the impact of ethoxy substituents on the physicochemical and photoelectric properties. Comparative analysis reveals that dialkoxy-substituted BQDO-F has a more planar molecular skeleton, a red-shifted absorption spectrum, upshifted energy levels, stronger crystallinity, and reduced energetic disorder compared to the monoalkoxy-substituted BQO-F. Although the replacement of fluorine atoms with chlorine atoms on the end-capped units of BQDO-F leads to a bathochromically shifted absorption spectrum, the resulting molecule BQDO-Cl shows worse π-π packing order compared to BQDO-F. Benefiting from the more favorable active layer morphology and improved carrier dynamics, the PBDB-T:BQDO-F-based organic solar cell achieves a much higher power conversion efficiency (PCE) of 16.41% compared to that of 14.48% obtained in the BQO-F-based device. In comparison with the BQDO-F-based device, the higher voltage loss of the BQDO-Cl-based device results in a lower PCE of 15.89%. The results clarify the effects of ethoxy substituents and end-capped substitutions of quinoxaline core-based small-molecule acceptors on efficient organic solar cells.

Dual Function of the Third Component in Ternary Organic Solar Cells: Broaden the Spectrum and Optimize the Morphology

Ternary organic solar cells (T-OSCs) have attracted significant attention as high-performance devices. In recent years, T-OSCs have achieved remarkable progress with power conversion efficiency (PCE) exceeding 19%. However, the introduction of the third component complicates the intermolecular interaction compared to the binary blend, resulting in poor controllability of active layer and limiting performance improvement. To address these issues, dual-functional third components have been developed that not only broaden the spectral range but also optimize morphology. In this review, the effect of the third component on expanding the absorption range of T-OSCs is first discussed. Second, the extra functions of the third component are introduced, including adjusting the crystallinity and molecular stack in active layer, regulating phase separation and purity, altering molecular orientation of the donor or acceptor. Finally, a summary of the current research progress is provided, followed by a discussion of future research directions.

Non-halogenated Solvent-Processed Organic Solar Cells with Approaching 20 % Efficiency and Improved Photostability

The development of high-efficiency organic solar cells (OSCs) processed from non-halogenated solvents is crucially important for their scale-up industry production. However, owing to the difficulty of regulating molecular aggregation, there is a huge efficiency gap between non-halogenated and halogenated solvent processed OSCs. Herein, we fabricate o-xylene processed OSCs with approaching 20 % efficiency by incorporating a trimeric guest acceptor named Tri-V into the PM6:L8-BO-X host blend. The incorporation of Tri-V effectively restricts the excessive aggregation of L8-BO-X, regulates the molecular packing and optimizes the phase-separation morphology, which leads to mitigated trap density states, reduced energy loss and suppressed charge recombination. Consequently, the PM6:L8-BO-X:Tri-V-based device achieves an efficiency of 19.82 %, representing the highest efficiency for non-halogenated solvent-processed OSCs reported to date. Noticeably, with the addition of Tri-V, the ternary device shows an improved photostability than binary PM6:L8-BO-X-based device, and maintains 80 % of the initial efficiency after continuous illumination for 1380 h. This work provides a feasible approach for fabricating high-efficiency, stable, eco-friendly OSCs, and sheds new light on the large-scale industrial production of OSCs.

Completely Non-Fused Low-Cost Acceptor Enables Organic Photovoltaic Cells with 17 % Efficiency

To meet the industrial requirements of organic photovoltaic (OPV) cells, it is imperative to accelerate the development of cost-effective materials. Thiophene-benzene-thiophene central unit-based acceptors possess the advantage of low synthetic cost, while their power conversion efficiency (PCE) is relatively low. Here, by incorporating a para-substituted benzene unit and 1st-position branched alkoxy chains with large steric hindrance, a completely non-fused non-fullerene acceptor, TBT-26, was designed and synthesized. The narrow band gap of 1.38 eV ensures the effective utilization of sunlight. The favorable phase separation morphology of TBT-26-based blend film facilitates the efficient exciton dissociation and charge transport in corresponding OPV cell. Therefore, the TBT-26-based small-area cell achieves an impressive PCE of 17.0 %, which is the highest value of completely non-fused OPV cells. Additionally, we successfully demonstrated the scalability of this design by fabricating a 28.8 cm2 module with a high PCE of 14.3 %. Overall, our work provides a practical molecular design strategy for developing high-performance and low-cost acceptors, paving the way for industrial applications of OPV technology.

Efficient Dual Mechanisms Boost the Efficiency of Ternary Solar Cells with Two Compatible Polymer Donors to Exceed 19

Ternary strategyopens a simple avenue to improve the power conversion efficiency (PCE) of organic solar cells (OSCs). The introduction of wide bandgap polymer donors (PDs) as third component canbetter utilize sunlight and improve the mechanical and thermal stability of active layer. However, efficient ternary OSCs (TOSCs) with two PDs are rarely reported due to inferior compatibility and shortage of efficient PDs match with acceptors. Herein, two PDs-(PBB-F and PBB-Cl) are adopted in the dual-PDs ternary systems to explore the underlying mechanisms and improve their photovoltaic performance. The findings demonstrate that the third components exhibit excellent miscibility with PM6 and are embedded in the host donor to form alloy-like phase. A more profound mechanism for enhancing efficiency through dual mechanisms, that are the guest energy transfer to PM6 and charge transport at the donor/acceptor interface, has been proposed. Consequently, the PM6:PBB-Cl:BTP-eC9 TOSCs achieve PCE of over 19%. Furthermore, the TOSCs exhibit better thermal stability than that of binary OSCs due to the reduction in spatial site resistance resulting from a more tightly entangled long-chain structure. This work not only provides an effective approach to fabricate high-performance TOSCs, but also demonstrates the importance of developing dual compatible PD materials.

Small Molecule Donors Design Rules for Non-Halogen Solvent Fabricated Organic Solar Cells

Compared with all-small-molecule (ASM) and other types of organic solar cells (OSCs), the small molecule donor:polymer acceptor (SMD:PA) OSCs develop much slower due to the lack of material matching rules. Herein, by changing the end-cap substituent of the small molecule donor from ethyl (MPhS-C2) to benzyl (MPhS-Ph), the different selection rules of donor properties and thermal annealing (TA) treatment between the ASM and the SMD:PA system under tetrahydrofuran processing are thoroughly investigated. Therefore, MPhS-Ph exhibits more ordered molecular packing, leading to better adaptability in the SMD:PA system without TA; while the inferior molecular packing of MPhS-C2 after spin-coating performs better in the ASM system with TA. Whether spin-coating or TA process dominates morphological optimization also dominates their energy loss. Therefore, the MPhS-Ph:PYF-T-o and MPhS-C2:BTP-eC9 based devices achieve the highest power conversion efficiency (PCE) of 12.1% and 15.7%, respectively, both of which are cutting-edge PCEs in their own type of OSCs fabricated by non-halogen solvent. This result suggests that intrinsic strong crystallization independent of the thermal drive is hoped in SMD:PA-OSCs, while high miscibility after spin-coating and proper assembly under thermal drive is expected in ASM-OSCs, providing deep understanding and guidance in highly efficient materials design rules in both ASM-OSCs and SMD:PA-OSCs.

Optimized Crystal Framework by Asymmetric Core Isomerization in Selenium-Substituted Acceptor for Efficient Binary Organic Solar Cells

Both the regional isomerization and selenium-substitution of the small molecular acceptors (SMAs) play significant roles in developing efficient organic solar cells (OSCs), while their synergistic effects remain elusive. Herein, we developed three isomeric SMAs (S-CSeF, A-ISeF, and A-OSeF) via subtly manipulating the mono-selenium substituted position (central, inner, or outer) and type of heteroaromatic ring on the central core by synergistic strategies for efficient OSCs, respectively. Crystallography of asymmetric A-OSeF presents a closer intermolecular π-π stacking and more ordered 3-dimensional network packing and efficient charge-hopping pathways. With the successive out-shift of the mono-selenium substituted position, the neat films give a slightly wider band gap and gradually higher crystallinity and electron mobility. The PM1 : A-OSeF afford favourable fibrous phase separation morphology with more ordered molecular packing and efficient charge transportation compared to the other two counterparts. Consequently, the A-OSeF-based devices achieve a champion efficiency of 18.5 %, which represents the record value for the reported selenium-containing SMAs in binary OSCs. Our developed precise molecular engineering of the position and type of selenium-based heteroaromatic ring of SMAs provides a promising synergistic approach to optimizing crystal stacking and boosting top-ranked selenium-containing SMAs-based OSCs.

Molecular Stacking and Aggregation Optimization of Photoactive Layer through Solid Additive Enables High-Performance Organic Solar Cells

Regulating molecular packing and aggregation of photoactive layer is a critical but challenging issue in developing high-performance organic solar cells. Herein, two structurally similar analogues of anthra[2,3-b : 6,7-b']dithiophene (ADT) and naphtho[1,2-b : 5,6-b']dithiophene (NDT) are developed as solid additive to exploit their effect in regulating the molecular aggregation and π-stacking of photoactive layer. We clarify that the perpendicular arrangements of NDT can enlarge the molecular packing space and improve the face-on stacking of Y6 during the film formation, favoring a more compact and ordered long-range π-π stacking in the out-of-plane direction after the removal of NDT under thermal annealing. The edge-to-face stacked herringbone-arrangement of ADT along with its non-volatilization under thermal annealing can induce the coexistence of face-on and edge-on stacking of blend film. As a result, the NDT treatment shows encouraging effect in improving the photovoltaic performance of devices based on various systems. Particularly, a remarkable PCE of 18.85 % is achieved in the PM6 : L8-BO-based device treated by NDT additive, which is a significant improvement with regard to the PCE of 16.41 % for the control device. This work offers a promising strategy to regulate the molecular packing and aggregation of photoactive layer towards significantly improved performance and stability of organic solar cells.