Constructing Mechanical Shuttles in a Three-dimensional (3D) Porous Architecture for Selective Transport of Lithium Ions

Li-ion transport in two-dimensional nanofluidic membranes

The growing demand for lithium, driven by its critical role in lithium-ion batteries (LIBs) and other applications, has intensified the need for efficient extraction methods from aqua-based resources such as seawater. Among various approaches, 2D channel membranes have emerged as promising candidates due to their tunable ion selectivity and scalability. While significant progress has been made in achieving high Li+/Mg2+ selectivity, enhancing Li+ ion selectivity over Na+ ion, the dominant monovalent cation in seawater, remains a challenge due to their similar properties. This review provides a comprehensive analysis of the fundamental mechanisms underlying Li+ selectivity in 2D channel membranes, focusing on the dehydration and diffusion processes that dictate ion transport. Inspired by the principles of biological ion channels, we identify key factors-channel size, surface charge, and binding sites-that influence energy barriers and shape the interplay between dehydration and diffusion. We highlight recent progress in leveraging these factors to enhance Li+/Na+ selectivity and address the challenges posed by counteracting effects in ion transport. While substantial advancements have been made, the lack of comprehensive principles guiding the interplay of these variables across permeation steps represents a key obstacle to optimizing Li+/Na+ selectivity. Nonetheless, with their inherent chemical stability and fabrication scalability, 2D channel membranes offer significant potential for lithium extraction if these challenges can be addressed. This review provides insights into the current state of 2D channel membrane technologies and outlines future directions for achieving enhanced Li+ ion selectivity, particularly in seawater applications.

High performance, pH-resistant membranes for efficient lithium recovery from spent batteries

Cation separation under extreme pH is crucial for lithium recovery from spent batteries, but conventional polyamide membranes suffer from pH-induced hydrolysis. Preparation of high performance nanofiltration membranes with excellent pH-resistance remains a challenge. Here we synthesize a high performance nanofiltration membrane (1,4,7,10-Tetraazacyclododecane (TAD)-1,3,5-Tris(bromomethyl)benzene (TBMB) thin film composite membranes (TFCMs)) with excellent pH-stability through interfacial quaternization reaction between TAD and TBMB. Due to the high stability of "C-N" bonds in TAD-TBMB TFCMs, its separation performance is stable even after 70 days immersion in concentrated acid (3 M H2SO4, HNO3, or HCl) and base (3 M NaOH), which is at least 15 times more stable than benchmark commercial membranes. The membrane shows an overall separation performance (11.3 L m-2 h-1 bar-1 (LMHB), RCo2+: 97% in 2 M H2SO4) due to the size sieving and the intensified charge repulsion, outperforming many of the state-of-the-art membranes. Finally, the TAD-TBMB TFCM remains stable during 30-days continuous nanofiltration of 2 M H2SO4 and leachate (2 M H2SO4, ions: 6.2 g L-1) from spent batteries.

Synthesis of supramolecular polymers with calix[4]arene and β-cyclodextrin and their application in heavy metal ion absorption

Two categories of supramolecular polymer monomers were produced by introducing the ureidopyrimidone quadruple-hydrogen bonding assemblies on the calix[4]arene and the β-cyclodextrin host units. The adsorption capacity of these supramolecular polymers for different metal ions was investigated by static adsorption. The results showed that at pH = 6 and when the adsorption equilibrium was reached, the supramolecular polymer with calixarene and β-cyclodextrin as the main body adsorbed up to 99% of Pb2+ and Cd2+, respectively. Also, the supramolecular polymer connected with six carbon chains on β-cyclodextrin had better recognition of Cd2+ and Pb2+, and the highest adsorption rate reached 99%. Industrial adsorbent materials from such supramolecular polymers will provide more options for water pollution control, especially for heavy metal ions.

Mechanically Interlocked Macrocycles on Covalent Networks for Energy and Environmental Applications

Macrocycles' unique properties of interacting with guest molecules have been an intriguing scientific endeavor for many decades. They are potentially practically useful for engineering applications, especially in energy and environmental applications. These applications are usually demanding, involving a high temperature, pH, voltage, etc., thus, finding suitable substrates that can endure working environments and sustain macrocycles' properties is highly desirable. In that sense, covalent networks are ideal as they are chemically/electrochemically/thermally stable and can be porous by design. Emerging porous materials, especially covalent organic frameworks (COFs), could be suitable as their porous spaces allow macrocycles to interact with guest species. In the past seven years, we have seen the rise of mechanically interlocked macrocycles on covalent networks (MIMc-CNs) that translate macrocycles' properties into macroscale materials. In this conceptual review, we first describe the idea of integrating MIMcs into COFs or conventional amorphous polymers. Next, we review the reported representative MIMc-CNs used in energy and environmental applications. We also provide a brief outlook for the future directions for the MIMc-CNs research.

Eliminating the effect of pH: Dual-matrix modulation adsorbent enables efficient lithium extraction from concentrated seawater

Lithium ion sieve adsorbents frequently extract liquid lithium resources due to their adsorption effect and cost advantages. However, the adsorption effect is significantly influenced by the ambient pH. The pH effects on the adsorption process can be categorized into two main areas: the competition adsorption of impurity ions and the difference in surface zeta potential. A dual-matrix modulation adsorbent was prepared, comprising a carrier matrix modified with zwitterionic quaternary ammonium bases and an adsorption matrix modified with carboxylation. The zwitterionic quaternary ammonium base groups were employed to mitigate the competitive adsorption of impurity ions by acid-base neutralization. Furthermore, the negative charge of carboxyl groups was employed to diminish the discrepancy in surface zeta potential. The adsorption effect of the ion sieve adsorbent under natural conditions appeared to be significantly enhanced by the dual-matrix modulation, with the saturated adsorption capacity (28 mg/g) and adsorption selectivity (α(Li+/Mg2+)=24.23) being 6.3 and 7.8 times higher than that of the manganese-based adsorbent (HMO) under the same conditions, respectively. Moreover, the adsorption effect was found to be consistent with HMO under alkaline conditions. The results demonstrate that by optimizing the adsorption conditions of the adsorbent, the detrimental impact of pH on the adsorption process of lithium ion sieves can be eliminated.

Adsorption and separation technologies based on supramolecular macrocycles for water treatment

The escalating challenges in water treatment, exacerbated by climate change, have catalyzed the emergence of innovative solutions. Novel adsorption separation and membrane filtration methodologies, achieved through molecular structure manipulation, are gaining traction in the environmental and energy sectors. Separation technologies, integral to both the chemical industry and everyday life, encompass concentration and purification processes. Macrocycles, recognized as porous materials, have been prevalent in water treatment due to their inherent benefits: stability, adaptability, and facile modification. These structures typically exhibit high selectivity and reversibility for specific ions or molecules, enhancing their efficacy in water purification processes. The progression of purification methods utilizing macrocyclic frameworks holds promise for improved adsorption separations, membrane filtrations, resource utilization, and broader water treatment applications. This review encapsulates the latest breakthroughs in macrocyclic host-guest chemistry, with a focus on adsorptive and membrane separations. The aim is to spotlight strategies for optimizing macrocycle designs and their subsequent implementation in environmental and energy endeavors, including desalination, elemental extraction, seawater energy harnessing, and sustainable extraction. Hopefully, this review can guide the design and functionality of macrocycles, offering a significantly promising pathway for pollutant removal and resource utilization.

The Incorporation of Sulfonated PAF Enhances the Proton Conductivity of Nafion Membranes at High Temperatures

Nafion membranes are widely used as proton exchange membranes, but their proton conductivity deteriorates in high-temperature environments due to the loss of water molecules. To address this challenge, we propose the utilization of porous aromatic frameworks (PAFs) as a potential solution. PAFs exhibit remarkable characteristics, such as a high specific surface area and porosity, and their porous channels can be post-synthesized. Here, a novel approach was employed to synthesize a PAF material, designated as PAF-45D, which exhibits a specific surface area of 1571.9 m2·g-1 and possesses the added benefits of facile synthesis and a low cost. Subsequently, sulfonation treatment was applied to PAF-45D in order to introduce sulfonic acid groups into its pores, resulting in the formation of PAF-45DS. The successful incorporation of sulfonic groups was confirmed through TG, IR, and EDS analyses. Furthermore, a novel Nafion composite membrane was prepared by incorporating PAF-45DS. The Nyquist plot of the composite membranes demonstrates that the sulfonated PAF-45DS material can enhance the proton conductivity of Nafion membranes at high temperatures. Specifically, under identical film formation conditions, doping with a 4% mass fraction of PAF-45DS, the conductivity of the Nafion composite membrane increased remarkably from 2.25 × 10-3 S·cm-1 to 5.67 × 10-3 S·cm-1, nearly 2.5 times higher. Such promising and cost-effective materials could be envisioned for application in the field of Nafion composite membranes.

Unlocking Direct Lithium Extraction in Harsh Conditions through Thiol-Functionalized Metal-Organic Framework Subnanofluidic Membranes

Metal-organic framework (MOF) membranes with high ion selectivity are highly desirable for direct lithium-ion (Li+) separation from industrial brines. However, very few MOF membranes can efficiently separate Li+ from brines of high Mg2+/Li+ concentration ratios and keep stable in ultrahigh Mg2+-concentrated brines. This work reports a type of MOF-channel membranes (MOFCMs) by growing UiO-66-(SH)2 into the nanochannels of polymer substrates to improve the efficiency of MOF membranes for challenging Li+ extraction. The resulting membranes demonstrate excellent monovalent metal ion selectivity over divalent metal ions, with Li+/Mg2+ selectivity up to 103 since Mg2+ should overcome a higher energy barrier than Li+ when transported through the MOF pores, as confirmed by molecular dynamics simulations. Under dual-ion diffusion, as the Mg2+/Li+ mole ratio of the feed solution increases from 0.2 to 30, the membrane Li+/Mg2+ selectivity decreases from 1516 to 19, corresponding to the purity of lithium products between 99.9 and 95.0%. Further research on multi-ion diffusion that involves Mg2+ and three monovalent metal ions (K+, Na+, and Li+, referred to as M+) in the feed solutions shows a significant improvement in Li+/Mg2+ separation efficiency. The Li+/Mg2+ selectivity can go up to 1114 when the Mg2+/M+ molar concentration ratio is 1:1, and it remains at 19 when the ratio is 30:1. The membrane selectivity is also stable for 30 days in a highly concentrated solution with a high Mg2+/Li+ concentration ratio. These results indicate the feasibility of the MOFCMs for direct lithium extraction from brines with Mg2+ concentrations up to 3.5 M. This study provides an alternative strategy for designing efficient MOF membranes in extracting valuable minerals in the future.

Mechanically Interlocked Interphase with Energy Dissipation and Fast Li-Ion Transport for High-Capacity Lithium Metal Batteries

Constructing an artificial solid electrolyte interphase (ASEI) on Li metal anodes (LMAs) is a potential strategy for addressing the dendrite issues. However, the mechanical fatigue of the ASEI caused by stress accumulation under the repeated deformation from the Li plating/stripping is not taken seriously. Herein, this work introduces a mechanically interlocked [an]daisy chain network (DC MIN) into the ASEI to stabilize the Li metal/ASEI interface by combining the functions of energy dissipation and fast Li-ion transport. The DC MIN featured by large-range molecular motions is cross-linked via efficient thiol-ene click chemistry; thus, the DC MIN has flexibility and excellent mechanical properties. As an ASEI, the crown ether units in DC MIN not only interact with the dialkylammonium of a flexible chain, forming the energy dissipation behavior but also coordinate with Li ion to support the fast Li-ion transport in DC MIN. Therefore, a stable 2800 h-symmetrical cycling (1 mA cm-2 ) and an excellent 5 C-rate (full cell with LiFePO4 ) performance are achieved by DC MIN-based ASEI. Furthermore, the 1-Ah pouch cell (LiNi0.88 Co0.09 Mn0.03 O2 cathode) with DC MIN-coated LMA exhibits improved capacity retention (88%) relative to the Control. The molecular design of DC MIN provides new insights into the optimization of an ASEI for high-energy LMAs.

Advanced Lithium Extraction Membranes Derived from Tagged-Modification of Polyamide Networks

Efficient Mg2+ /Li+ separation is crucial to combating the lithium shortage worldwide, yet current nanofiltration membranes suffer from low efficacy and/or poor scalability, because desirable properties of membranes are entangled and there is a trade-off. This work reports a "tagged-modification" approach to tackle the challenge. A mixture of 3-bromo-trimethylpropan-1-aminium bromide (E1 ) and 3-aminopropyltrimethylazanium (E2 ) was designed to modify polyethylenimine - trimesoyl chloride (PEI-TMC) membranes. E1 and E2 reacted with the PEI and TMC, respectively, and thus, the membrane properties (hydrophilicity, pore sizes, charge) were untangled and intensified simultaneously. The permeance (34.3 L m-2  h-1  bar-1 ) and Mg2+ /Li+ selectivity (23.2) of the modified membranes are about 4 times and 2 times higher than the pristine membrane, and they remain stable in a 30-days test. The permeance is the highest among all analogous nanofiltration membranes. The tagged-modification method enables the preparation of large-area membranes and modules that produce high-purity lithium carbonate (Li2 CO3 ) from simulated brine.

Fluorine-Rich Supramolecular Nano-Container Crosslinked Hydrogel for Lithium Extraction with Super-High Capacity and Extreme Selectivity

Extraction and recovery of lithium from reserves play a critical role in the sustainable development of energy due to the explosive growth of the lithium-battery market. However, the low efficiency of extraction and recovery seriously threatens the sustainability of lithium supply. In this contribution, we fabricate a novel mechanically robust fluorine-rich hydrogel, showing highly efficient Li+ extraction from Li-containing solutions. The hydrogel was facilely fabricated by simple one-pot polymerization of supramolecular nanosheets of fluorinated monomers, acrylic acid and a small amount of chemical crosslinkers. The hydrogel exhibits a remarkable lithium adsorption capacity (Qm Li+ =122.3 mg g-1 ) and can be reused. Moreover, it can exclusively extract lithium ions from multiple co-existing metal ions. Notably, the separation of Li+ /Na+ in actual wastewater is achieved with a surprising separation factor of 153.72. The detailed characterizations as well as calculation showed that the specific coordination of Li-F plays a central role for both of the striking recovery capability and selectivity for Li+ . Furthermore, an artificial device was constructed, displaying high efficiency of extracting lithium in various complex actual lithium-containing wastewater. This work provides a new and promising avenue for the efficient extraction and recovery of lithium resource from complex lithium-containing solutions.

Highly Selective Transport and Enrichment of Lithium Ions through Bionic Ion Pair Receptor Nanochannels

Inspired by ion pair cotransport channels in biological systems, a bionic nanochannel modified with lithium ion pair receptors is constructed for selective transport and enrichment of lithium ions (Li⁺). NH₂-pillar[5]arene (NP5) is chosen as ion pair receptors, and the theoretical simulation and NMR titration experiments illustrate that NP5 has good affinity for the ion pair of LiCl through a strong host-guest interaction at the molecular level. Due to the confinement effect and ion pair cooperation recognition, an NP5-based receptor was introduced into an artificial PET nanochannel. An I-V test indicated that the NP5 channel realized the highly selective recognition for Li⁺. Meanwhile, transmembrane transport and COMSOL simulation experiments proved that the NP5 channel achieved the transport and enrichment of Li⁺ through the cooperative interaction between NP5 and LiCl. Moreover, the receptor solution of transmembrane transport LiCl in the NP5 channel was used to cultivate wheat seedlings, which obviously promoted their growth. This nanochannel based on the ion pair recognition will be much useful for practical applications like metal ion extraction, enrichment, and recycle.