Benzotrithiophene-based Covalent Organic Framework Photocatalysts with Controlled Conjugation of Building Blocks for Charge Stabilization

Rational Construction of Cyanide-Functionalized D-A-π-D Covalent Organic Framework for Highly Efficient Overall H2O2 Photosynthesis from Air and Water

Sacrificial-agent-free overall photosynthesis of H2O2 from water and air represents currently a promising route to reform the industrial anthraquinone production manner, but, still blocks by the requirement of pure O2 feedstock, due to the insufficient oxygen supply from water under air. Herein, we report a rational molecule design on COFs (covalent organic frameworks) equiped with cyanide-functionalized D-A-π-D system for highly efficient overall H2O2 production from air and water through photocatalytic oxygen reduction reactions (ORR) and water oxidation reaction (WOR). Without using any sacrificial agent, the as-synthesized D-A-π-D COF is found to enable a H2O2 production rate as high as 4742 μmol h-1 g-1 from water and air and an O2 utilization and conversion rate up to 88 %, exceeding the other D-A-π-A COF by respectively 1.9- and 1.3-fold. Such high performance is attributed to the tuned electronic structure and prolonged charge lifetime facilitated by the unique D-A-π-D structure and cyanide groups. This work highlights a fundamental molecule design on advanced photocatalytic COFs with complicated D-A system for low-cost and massive H2O2 production.

Manipulating p-π Resonance through Methoxy Group Engineering in Covalent Organic Frameworks for an Efficient Photocatalytic Hydrogen Evolution

Kinetic factors frequently emerge as the primary constraints in photocatalysis, exerting a critical influence on the efficacy of polymeric photocatalysts. The diverse conjugation systems within covalent organic frameworks (COFs) can significantly impact photon absorption, energy level structures, charge separation and migration kinetics. Consequently, these limitations often manifest as unsatisfactory kinetic behavior, which adversely affects the photocatalytic activity of COFs. To address these challenges, we propose a methoxy (-OMe) molecular engineering strategy designed to enhance charge carrier kinetics and mitigate mass transfer resistance. Through strategic modulation of the position and quantity of -OMe units, we can effectively manipulate the p-π conjugation, thereby enhancing charge separation and migration. Moreover, COFs enriched with -OMe moieties exhibit enhanced mass transfer dynamics due to the hydrophilic nature of methoxy groups, which facilitate the diffusion of reactants and products within the porous structure. This approach is hypothesized to drive an efficient photocatalytic hydrogen evolution reaction.

Double enhancement of protonation and conjugation in donor-imine-donor covalent organic frameworks for photocatalytic hydrogen evolution

Covalent organic frameworks (COFs) have emerged as highly promising platforms for photocatalytic water splitting. However, exploring the structure-activity relationships in different COF systems remains challenging. In this study, three donor-imine-donor (D-I-D) COFs as relatively pure model materials were carefully selected to investigate the effect of protonation and conjugation on the mechanism of photocatalytic H2 evolution. Unlike widely reported donor-acceptor (D-A) COF systems, these three ideal COFs have short electronic channels and lack chemical bond isomerism and heteroatoms in building blocks. These aspects are beneficial for a comprehensive investigation of the underlying mechanisms at the active sites of the imine bond. Both the calculation and experimental results indicate that increasing the conjugation intensity can enhance the efficiency of exciton dissociation and charge transfer rates. Protonation can also dominantly enhance the light absorption capacity and electron transport efficiency of D-I-D COFs. After protonation, the Py-hCOF with optimal conjugation intensity exhibits a remarkable H2 evolution rate of 44.2 mmol g-1 h-1 under visible light, which is 88.4 times higher than that of Tpe-hCOF. This result highlights the crucial roles of simultaneous enhancement of the protonation and conjugation in improving photocatalytic hydrogen evolution of COFs, providing valuable insights for the design of COF materials to achieve the superior electronic functions in photocatalysis.

Reticular Materials for Photocatalysis

Photocatalysis leverages solar energy to overcome the thermodynamic barrier, enabling efficient chemical reactions under mild conditions. It can greatly reduce reliance on traditional energy sources and has attracted significant research interest. Reticular materials, including metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), represent a class of crystalline materials constructed from molecular building blocks linked by coordination and covalent bonds, respectively. Reticular materials function as heterogeneous catalysts, combining well-defined structures and high tailorability akin to homogeneous catalysts. In this review, the regulation of light absorption, charge separation, and surface reactions in the photocatalytic process through precise molecular-level design based on the features of reticular materials is elaborated. Notably, for MOFsmicroenvironment modulation around catalytic sites affects photocatalytic performance is delved, with emphasis on their unique dynamic and flexible microenvironments. For COFs, the inherent excitonic effects due to their fully organic nature is discussed and highlight the strategies to regulate excitonic effects for charge- and/or energy-transfer-mediated photocatalysis. Finally, the current challenges and future directions in this field, aiming to provide a comprehensive understanding of how reticular materials can be optimized for enhanced photocatalysis is discussed.

Photons, Excitons, and Electrons in Covalent Organic Frameworks

Covalent organic frameworks (COFs) are created by the condensation of molecular building blocks and nodes to form two-dimensional (2D) or three-dimensional (3D) crystalline frameworks. The diversity of molecular building blocks with different properties and functionalities and the large number of possible framework topologies open a vast space of possible well-defined porous architectures. Besides more classical applications of porous materials such as molecular absorption, separation, and catalytic conversions, interest in the optoelectronic properties of COFs has recently increased considerably. The electronic properties of both the molecular building blocks and their linkage chemistry can be controlled to tune photon absorption and emission, to create excitons and charge carriers, and to use these charge carriers in different applications such as photocatalysis, luminescence, chemical sensing, and photovoltaics. In this Perspective, we will discuss the relationship between the structural features of COFs and their optoelectronic properties, starting with the building blocks and their chemical connectivity, layer stacking in 2D COFs, control over defects and morphology including thin film synthesis, exploring the theoretical modeling of structural, electronic, and dynamic features of COFs, and discussing recent intriguing applications with a focus on photocatalysis and photoelectrochemistry. We conclude with some remarks about present challenges and future prospects of this powerful architectural paradigm.

Enhanced Alkene Oxidative Cleavage in Water via Photoexcited FeIV Species within Covalent Organic Framework Thin Films

The oxidative cleavage of alkenes is a crucial step in synthesizing key organic molecules featuring carbonyl functional groups prevalent in natural products and pharmaceuticals. We introduce a photochemical method for heterogeneous C=C bond cleavage, employing photo-catalytically generated [(bTAML)FeIV-O-FeIV(bTAML)]- species (where bTAML stands for biuret-modified tetraamido macrocyclic ligand) in aqueous environments under gentle conditions. Leveraging the photosensitizing properties of Covalent Organic Frameworks (COFs) and their advantageous morphological traits as films, we enhance the reaction by closely associating the substrate with the catalyst. This study marks the inaugural demonstration of Fe2 IV-μ-oxo radical cation and FeIV=O species facilitating alkene cleavage in water against a backdrop of a hydrophobic COF. Through comprehensive mechanistic studies, including control experiments, we confirm that these two high-valent iron oxo species collaborate to cleave alkenes, forming an intermediate epoxide. Our approach yields moderate to high success across various alkenes, displaying diverse functional groups (achieving up to 75 % yield) with notable efficiency and selectivity towards aldehyde/ketone products. Moreover, the heterogeneous COF film, immobilizing (Et4N)2[FeIII(Cl)bTAML], exhibits exceptional recyclability, enduring up to four cycles.

Mesoporous Vinylene-Linked Covalent Organic Frameworks with Heteroatom-Tuned Crystallinity and Photocatalytic Behaviors

Owing to its prominent π-delocalization and stability, vinylene linkage holds great merits in the construction of covalent organic frameworks (COFs) with promising semiconducting properties. However, carbon-carbon double bond formation reaction always exhibits relatively low reversibility, unfavorable for the formation of high crystalline frameworks through self-error correction and assembling processes. In this work, we report a heteroatom-tuned strategy to build up a series of two-dimensional (2D) vinylene-linked COFs by Knoevenagel condensation of an electron-deficient methylthiazolyl-based monomer with different triformyl substituted (hetero-)aromatic derivatives. The resulting COFs show high-quality periodic mesoporous structures with high surface areas. Embedding heteroatoms into the backbones enables significantly improving their crystallinity, and finely tailoring their semiconducting structures. Upon visible light stimulation, one of the as-prepared COFs with donor-π-acceptor structure could deliver a nearly seven-fold increase in the catalytic activity of hydrogen generation as compared with the other two. Meanwhile, in combination with high crystallinity and the matched conduction band energy level, such kind of COFs can be able to selectively generate singlet oxygen and superoxide radicals in a high ratio of up to 30 : 1, allowing for catalyzing aerobic thioanisole oxidation in distinctly tunable activities through the substituent electronic effect of the substrates.

Linear oligo(phenylenevinylene)-based covalent organic frameworks

Covalent organic frameworks (COFs) incorporating oligo(phenylenevinylene) units have shown promise in enhancing photocatalytic hydrogen evolution. This study presents a series of linear oligo(phenylenevinylene)-based COFs with various ratios of β-ketoenamine to imine linkages. The COFs-950-OMe are crystalline, exhibiting higher surface area compared to amorphous COFs-950, due to the introduction of methoxy side groups.

Rigid covalent organic frameworks with thiazole linkage to boost oxygen activation for photocatalytic water purification

Owing to their capability to produce reactive oxygen species (ROS) under solar irradiation, covalent organic frameworks (COFs) with pre-designable structure and unique architectures show great potentials for water purification. However, the sluggish charge separation, inefficient oxygen activation and poor structure stability in COFs restrict their practical applications to decontaminate water. Herein, via a facile one-pot synthetic strategy, we show the direct conversion of reversible imine linkage into rigid thiazole linkage can adjust the π-conjugation and local charge polarization of skeleton to boost the exciton dissociation on COFs. The rigid linkage can also improve the robustness of skeleton and the stability of COFs during the consecutive utilization process. More importantly, the thiazole linkage in COFs with optimal C 2p states (COF-S) effectively increases the activities of neighboring benzene unit to directly modulate the O2-adsorption energy barrier and improve the ROS production efficiency, resulting in the excellent photocatalytic degradation efficiency of seven toxic emerging contaminants (e.g. degrading ~99% of 5 mg L-1 paracetamol in only 7 min) and effective bacterial/algal inactivation performance. Besides, COF-S can be immobilized in continuous-flow reactor and in enlarged reactor to efficiently eliminate pollutants under natural sunlight irradiation, demonstrating the feasibility for practical application.

Molecular Engineering for Modulating Photocatalytic Hydrogen Evolution of Fully Conjugated 3D Covalent Organic Frameworks

Covalent organic frameworks (COFs) have recently shown great potential for photocatalytic hydrogen production. Currently almost all reports are focused on two-dimensional (2D) COFs, while the 3D counterparts are rarely explored due to their non-conjugated frameworks derived from the sp3 carbon based tetrahedral building blocks. Here, we rationally designed and synthesized a series of fully conjugated 3D COFs by using the saddle-shaped cyclooctatetrathiophene derivative as the building block. Through molecular engineering strategies, we thoroughly discussed the influences of key factors including the donor-acceptor structure, hydrophilicity, specific surface areas, as well as the conjugated/non-conjugated structures on their photocatalytic hydrogen evolution properties. The as-synthesized fully conjugated 3D COFs could generate the hydrogen up to 40.36 mmol h-1 g-1. This is the first report on intrinsic metal-free 3D COFs in photocatalytic hydrogen evolution application. Our work provides insight on the structure design of 3D COFs for highly-efficient photocatalysis, and also reveals that the semiconducting fully conjugated 3D COFs could be a useful platform in clear energy-related fields.

Cyanide-based Covalent Organic Frameworks for Enhanced Overall Photocatalytic Hydrogen Peroxide Production

Photocatalytic oxygen reduction to produce hydrogen peroxide (H2O2) is a promising route to providing oxidants for various industrial applications. However, the lack of well-designed photocatalysts for efficient overall H2O2 production in pure water has impeded ongoing research and practical thrusts. Here we present a cyanide-based covalent organic framework (TBTN-COFs) combining 2,4,6-trimethylbenzene-1,3,5-tricarbonitrile (TBTN) and benzotrithiophene-2,5,8-tricarbaldehyde (BTT) building blocks with water-affinity and charge-separation. The ultrafast intramolecular electron transfer (<500 fs) and prolonged excited state lifetime (748 ps) can be realized by TBTN-COF, resulting in a hole accumulated BTT and electron-rich TBTN building block. Under one sun, the 11013 μmol h-1 g-1 yield rate of H2O2 can be achieved without any sacrificial agent, outperforming most previous reports. Furthermore, the DFT calculation and in situ DRIFTS spectrums suggesting a Yeager-type absorption of *O2⋅- intermediate in the cyanide active site, which prohibits the formation of superoxide radical and revealing a favored H2O2 production pathway.

Molecular and Heterojunction Device Engineering of Solution-Processed Conjugated Reticular Oligomers: Enhanced Photoelectrochemical Hydrogen Evolution through High-Effective Exciton Separation

Covalent organic frameworks (COFs) face limited processability challenges as photoelectrodes in photoelectrochemical water reduction. Herein, sub-10 nm benzothiazole-based colloidal conjugated reticular oligomers (CROs) are synthesized using an aqueous nanoreactor approach, and the end-capping molecular strategy to engineer electron-deficient units onto the periphery of a CRO nanocrystalline lattices (named CROs-Cg). This results in stable and processable "electronic inks" for flexible photoelectrodes. CRO-BtzTp-Cg and CRO-TtzTp-Cg expand the absorption spectrum into the infrared region and improve fluorescence lifetimes. Heterojunction device engineering is used to develop interlayer heterojunction and bulk heterojunction (BHJ) photoelectrodes with a hole transport layer, electron transport layer, and the main active layers, using a CROs/CROs-Cg or one-dimensional (1D) electron-donating polymer HP18 mixed solution via spinning coating. The ITO/CuI/CRO-TtzTp-Cg-HP18/SnO2/Pt photoelectrode shows a photocurrent of 94.9 µA cm‒2 at 0.4 V versus reversible hydrogen electrode (RHE), which is 47.5 times higher than that of ITO/Bulk-TtzTp. Density functional theory calculations show reduced energy barriers for generating adsorbed H* intermediates and increased electron affinity in CROs-Cg. Mott-Schottky and charge density difference analyses indicate enhanced charge carrier densities and accelerated charge transfer kinetics in BHJ devices. This study lays the groundwork for large-scale production of COF nanomembranes and heterojunction structures, offering the potential for cost-effective, printable energy systems.

Square-planar Tetranuclear Cluster-based Alkaline Earth Metal-organic Frameworks with Enhanced Proton Conductivity

Alkaline earth (AE) metal complexes have garnered significant interest in various functional fields due to their nontoxicity, low density, and low cost. However, there is a lack of systematic investigation into the structural characteristics and physical properties of AE-metal-organic frameworks (MOFs). In this research, we synthesized isostructural MOFs consisting of AE4(μ4-Cl) clusters bridged by benzo-(1,2;3,4;5,6)-tris(thiophene-2'-carboxylic acid) (BTTC3-) ligands. The resulting structure forms a truncated octahedral cage denoted as [AE4(m4-Cl)]6(BTTC)8, which further linked to a porous three-dimensional framework. Among the investigated AE ions (Ca, Sr, and Ba), the Ca4-MOF demonstrated good chemical stability in water compared to Sr4-MOF and Ba4-MOF. The N2 adsorption and solid-state UV-vis-NIR absorption behaviors were evaluated for all AE4-MOFs, showing similar trends among the different metal ions. Additionally, the proton conduction study revealed that the Ca4-MOF exhibited ultra-high proton conductivity, reaching 3.52×10-2 S cm-1 at 343 K and 98 % RH. Notably, the introduction of LiCl via guest exchange resulted in an improved proton conduction of up to 6.36×10-2 S cm-1 under similar conditions in the modified LiCl@Ca4-MOF. The findings shed light on the regulation of physical properties and proton conductivity of AE-MOFs, providing valuable insights for their potential applications in various fields.

Simple Functionalization of a Donor Monomer to Enhance Charge Transfer in Porous Polymer Networks for Photocatalytic Hydrogen Evolution

Porous polymer networks (PPNs) are promising candidates as photocatalysts for hydrogen production. Constructing a donor-acceptor structure is known to be an effective approach for improving photocatalytic activity. However, the process of how a functional group of a monomer can ensure photoexcited charges transfer and improve the hydrogen evolution rate (HER) has not yet been studied on the molecular level. Herein, we design and synthesize two kinds of triazatruxene (TAT)-based PPNs: TATR-PPN with a hexyl (R) group and TAT-PPN without the hexyl group, to understand the relationship between the presence of the functional group and charge transfer. The hexyl group on the TAT unit was found to ensure the transfer of photoexcited electrons from a donor unit to an acceptor unit and endowed the TATR-PPN with stable hydrogen production.

Symmetrical Localized Built-in Electric Field by Induced Polarization Effect in Ionic Covalent Organic Frameworks for Selective Imaging and Killing Bacteria

Photocatalytic materials are some of the most promising substitutes for antibiotics. However, the antibacterial efficiency is still inhibited by the rapid recombination of the photogenerated carriers. Herein, we design a cationic covalent organic framework (COF), which has a symmetrical localized built-in electric field due to the induced polarization effect caused by the electron-transfer reaction between the Zn-porphyrin unit and the guanidinium unit. Density functional theory calculations indicate that there is a symmetrical electrophilic/nucleophilic region in the COF structure, which results from increased electron density around the Zn-porphyrin unit. The formed local electric field can further inhibit the recombination of photogenerated carriers by driving rapid electron transfer from Zn-porphyrin to guanidinium under light irradiation, which greatly increases the yield of reactive oxygen species. This COF wrapped by DSPE-PEG2000 can selectively target the lipoteichoic acid of Gram-positive bacteria by electrostatic interaction, which can be used for selective discrimination and imaging of bacteria. Furthermore, this nanoparticle can rapidly kill Gram-positive bacteria including 99.75% of Staphylococcus aureus and 99.77% of Enterococcus faecalis at an abnormally low concentration (2.00 ppm) under light irradiation for 20 min. This work will provide insight into designing photoresponsive COFs through engineering charge behavior.

Fully Conjugated 2D sp2 Carbon-Linked Covalent Organic Frameworks for Photocatalytic Overall Water Splitting

Covalent organic frameworks (COFs) hold great promise for solar-driven hydrogen production. However, metal-free COFs for photocatalytic overall water splitting remain elusive, primarily due to challenges in simultaneously regulating their band structures and catalytic sites to enable concurrent half-reactions. Herein, two types of π-conjugated COFs containing the same donor-acceptor structure are constructed via Knoevenagel condensation and Schiff base reaction to afford cyanovinylene- and imine-bridged COFs, respectively. The difference in the linkage leads to a remarkable difference in their photocatalytic activity toward water splitting. The 2D sp2 carbon-linked COF exhibits notable activity for photocatalytic overall water splitting, which can reach an apparent quantum efficiency of 2.53% at 420 nm. In contrast, the 2D imine-linked COF cannot catalyze the overall water-splitting reaction. Mechanistic investigations reveal that the cyanovinylene linkage is essential in modulating the band structure and promoting charge separation in COFs, thereby enabling overall water splitting. Moreover, it is further shown that crystallinity substantially impacts the photocatalytic performance of COFs. This study represents the first successful example of developing metal-free COFs with high crystallinity for photocatalytic overall water splitting.

Metal-Free Covalent Organic Frameworks for the Oxygen Reduction Reaction

The oxygen reduction reaction (ORR) is the key reaction in metal air and fuel cells. Among the catalysts that promote ORR, carbon-based metal-free catalysts are getting more attention because of their maximum atom utilization, effective active sites and satisfactory catalytic activity and stability. However, the pyrolysis synthesis of these carbons resulted in disordered porosities and uncontrolled catalytic sites, which hindered us in realizing the catalysts' design, the optimization of catalyst performance and the elucidation of structure-property relationship at the molecular level. Covalent organic frameworks (COFs) constructed with designable building blocks have been employed as metal-free electrocatalysts for the ORR due to their controlled skeletons, tailored pores size and environments, as well as well-defined location and kinds of catalytic sites. In this Concept article, the development of metal-free COFs for the ORR is summarized, and different strategies including skeletons regulation, linkages engineering and edge-sites modulation to improve the catalytic selectivity and activity are discussed. Furthermore, this Concept provides prospectives for designing and constructing powerful electrocatalysts based on the catalytic COFs.

Oligo(phenylenevinylene)-Based Covalent Organic Frameworks with Kagome Lattice for Boosting Photocatalytic Hydrogen Evolution

Covalent organic frameworks (COFs) have shown great advantages as photocatalysts for hydrogen evolution. However, the effect of linkage geometry and type of linkage on the extent of π-electron conjugation in the plane of the framework and photocatalytic properties of COFs remains a significant challenge. Herein, two Kagome (kgm) topologic oligo(phenylenevinylene)-based COFs are designed and synthesized for boosting photocatalytic hydrogen evolution via a "two in one" strategy. Under visible light irradiation, COF-954 with 5 wt% Pt as cocatalyst exhibits high hydrogen evolution rate (HER) of 137.23 mmol g-1 h-1 , outperforming most reported COF-based photocatalysts. More importantly, even in natural seawater, COF-954 shows an average HER of 191.70 mmol g-1 h-1 under ultraviolet-visible (UV-vis) light irradiation. Additionally, the water-drainage experiments indoors and outdoors demonstrate that 25 and 8 mL hydrogen gas could be produced in 80 min under UV-vis light and natural sunlight, respectively, corresponding to a high HER of 167.41 and 53.57 mmol h-1 g-1 . This work not only demonstrates an effective design strategy toward highly efficient COF-based photocatalysts, but also shows the great potential of using the COF-based photocatalysts for photocatalytic hydrogen evolution.

Novel Porous Organic Polymer Catalyst with Phosphate and Sulfonic Acid Sites for Facile Esterification of Levulinic Acid

Biomass-derived value-added materials such as levulinic acid (LA) are favorable natural resources for producing ester-based biolubricants owing to their biodegradability, nontoxicity, and excellent metal-adhering properties. However, highly active catalysts must be developed to carry out efficient esterification of LA with aliphatic alcohols, especially long-chain aliphatic alcohols. In this study, we developed a novel porous covalent organic polymer catalyst (BPOP-SO3H) with dual acid sites, phosphate and sulfonic acid sites, for the esterification of LA. The prepared BPOP-SO3H catalyst was verified using various surface analysis techniques. BPOP-SO3H exhibited 98% LA conversion with n-butanol and 99% selectivity for butyl levulinate ester within 30 min, which is superior to that of most reported catalysts. BPOP-SO3H also showed high LA conversion and ester selectivity when other aliphatic alcohols were used. Moreover, BPOP-SO3H showed good recyclability for five consecutive cycles. We believe that incorporating a high density of acid sites into a porous polymer with a large surface area and hierarchical pores is a promising approach for developing heterogeneous acid catalysts for the production of alkyl levulinate esters from LA.

A Thiophene Backbone Enables Two-Dimensional Poly(arylene vinylene)s with High Charge Carrier Mobility

Linear conjugated polymers have attracted significant attention in organic electronics in recent decades. However, despite intrachain π-delocalization, interchain hopping is their transport bottleneck. In contrast, two-dimensional (2D) conjugated polymers, as represented by 2D π-conjugated covalent organic frameworks (2D c-COFs), can provide multiple conjugated strands to enhance the delocalization of charge carriers in space. Herein, we demonstrate the first example of thiophene-based 2D poly(arylene vinylene)s (PAVs, 2DPAV-BDT-BT and 2DPAV-BDT-BP, BDT=benzodithiophene, BT=bithiophene, BP=biphenyl) via Knoevenagel polycondensation. Compared with 2DPAV-BDT-BP, the fully thiophene-based 2DPAV-BDT-BT exhibits enhanced planarity and π-delocalization with a small band gap (1.62 eV) and large electronic band dispersion, as revealed by the optical absorption and density functional calculations. Remarkably, temperature-dependent terahertz spectroscopy discloses a unique band-like transport and outstanding room-temperature charge mobility for 2DPAV-BDT-BT (65 cm2  V-1  s-1 ), which far exceeds that of the linear PAVs, 2DPAV-BDT-BP, and the reported 2D c-COFs in the powder form. This work highlights the great potential of thiophene-based 2D PAVs as candidates for high-performance opto-electronics.