Amphoteric Cellulose-Based Double-Network Hydrogel Electrolyte Toward Ultra-Stable Zn Anode

Unveiling potential of cellulose gel electrolyte: Molecular engineering for enhanced electrostatic interactions with Mg adatoms in Mg-ion battery

The Mg-ion battery faces significant limitations due to its liquid electrolyte, which suffers from inherent issues such as leakage and the growth of Mg dendrites. In contrast, gel polymer electrolytes (GPEs) offer heightened safety, a wide voltage window, and excellent flexibility, making them a promising alternative with outstanding electrochemical performance. In this study, a cyano-modified cellulose (CEC) GPE was engineered to aim at enhancing ion transportation and promoting uniform ion-flux through interactions between N and Mg2+ ions. The resulting CEC-based GPE demonstrated a high ionic conductivity of 1.73 mS cm-1 at room temperature. Furthermore, it exhibited remarkable Mg plating/stripping performance (coulombic efficiency ∼96.7 %) and compatibility with electrodes. Importantly, when employed in a Mo6S8//Mg battery configuration, the CEC GPE displayed exceptional cycle stability, with virtually no degradation observed even after 650 cycles at 1C, thereby significantly advancing Mg-ion battery technology due to its excellent electrochemical properties. This study provides valuable insights into the molecular engineering of cellulose-based GPEs.

Improvements and Challenges of Hydrogel Polymer Electrolytes for Advanced Zinc Anodes in Aqueous Zinc-Ion Batteries

Aqueous zinc-ion batteries (AZIBs) are widely regarded as desirable energy storage devices due to their inherent safety and low cost. Hydrogel polymer electrolytes (HPEs) are cross-linked polymers filled with water and zinc salts. They are not only widely used in flexible batteries but also represent an ideal electrolyte candidate for addressing the issues associated with the Zn anode, including dendrite formation and side reactions. In HPEs, an abundance of hydrophilic groups can form strong hydrogen bonds with water molecules, reducing water activity and inhibiting water decomposition. At the same time, special Zn2+ transport channels can be constructed in HPEs to homogenize the Zn2+ flux and promote uniform Zn deposition. However, HPEs still face issues in practical applications, including poor ionic conductivity, low mechanical strength, poor interface stability, and narrow electrochemical stability windows. This Review discusses the issues associated with HPEs for advanced AZIBs, and the recent progresses are summarized. Finally, the Review outlines the opportunities and challenges for achieving high performance HPEs, facilitating the utilization of HPEs in AZIBs.

Interfacial Domino Effect Triggered by β-Alanine Cations Realized Highly Reversible Zinc-Metal Anodes

Realizing durative dense, dendrite-free, and no by-product deposition configuration on Zn anodes is crucial to solving the short circuit and premature failure of batteries, which is simultaneously determined by the Zn interface chemistry, electro-reduction kinetics, mass transfer process, and their interaction. Herein, this work unmasks a domino effect of the β-alanine cations (Ala+) within the hydrogel matrix, which effectively triggers the subsequent electrostatic shielding and beneficial knock-on effects via the specifical adsorption earliest event on the Zn anode surface. The electrostatic shielding effect regulates the crystallographic energetic preference of Zn deposits and retards fast electro-reduction kinetics, thereby steering stacked stockier block morphology and realizing crystallographic optimization. Meanwhile, the mass transfer rate of Zn2+ ions was accelerated via the SO4 2- anion immobilized caused by Ala+ in bulk electrolyte, finally bringing the balance between electroreduction kinetics and mass transfer process, which enables dendrite-free Zn deposition behavior. Concomitantly, the interfacial adsorbed Ala+ cations facilitate the electrochemical reduction of interfacial SO4 2- anions to form the inorganic-organic hybrid solid electrolyte interphase layer. The above domino effects immensely improve the utilization efficiency of Zn anodes and long-term stability, as demonstrated by the 12 times longer life of Zn||Zn cells (3650 h) and ultrahigh Coulombic efficiency (99.4 %).

Surface Engineering on Zinc Anode for Aqueous Zinc Metal Batteries

Rechargeable aqueous zinc metal batteries (AZMBs) are considered as a potential alternative to lithium-ion batteries due to their low cost, high safety, and environmental friendliness. However, the Zn anodes in AZMBs face severe challenges, such as dendrite growth, metal corrosion, and hydrogen evolution, all of which are closely related to the Zn/electrolyte interface. This article offers a short review on surface passivation to alleviate the issues on the Zn anodes. The composition and structure of the surface layers significantly influence their functions and then the performance of the Zn anodes. The recent progresses are introduced, according to the chemical components of the passivation layers on the Zn anodes. Moreover, the challenges and prospects of surface passivation in stabilizing Zn anodes are discussed, providing valuable guidance for the development of AZMBs.

Zwitterionic Cellulose-Based Polymer Electrolyte Enabled by Aqueous Solution Casting for High-Performance Solid-State Batteries

Polyethylene oxide (PEO)-based solid-state batteries hold great promise as the next-generation batteries with high energy density and high safety. However, PEO-based electrolytes encounter certain limitations, including inferior ionic conductivity, low Li+ transference number, and poor mechanical strength. Herein, we aim to simultaneously address these issues by utilizing one-dimensional zwitterionic cellulose nanofiber (ZCNF) as fillers for PEO-based electrolytes using a simple aqueous solution casting method. Multiple characterizations and theoretical calculations demonstrate that the unique zwitterionic structure imparts ZCNF with various functions, such as disrupting PEO crystallization, dissociating lithium salts, anchoring anions through cationic groups, accelerating Li+ migration by anionic groups, as well as its inherent reinforcement effect. As a result, the prepared PL-ZCNF electrolyte exhibits remarkable ionic conductivity (5.37×10-4 S cm-1) and Li+ transference number (0.62) at 60 °C without sacrificing mechanical strength (9.2 MPa), together with high critical current density of 1.1 mA cm-2. Attributed to these merits of PL-ZCNF, the LiFePO4|PL-ZCNF|Li solid-state full-cell delivers exceptional rate capability and cycling performance (900 cycles at 5 C). Notably, the assembled pouch-cell can maintain steady operation over 1000 cycles with an impressive 93.7 % capacity retention at 0.5 C and 60 °C, highlighting the great potential of PL-ZCNF for practical applications.

Constructing Lysozyme Protective Layer via Conformational Transition for Aqueous Zn Batteries

The practical applications for aqueous Zn ion batteries (ZIBs) are promising yet still impeded by the severe side reactions on Zn metal. Here, a lysozyme protective layer (LPL) is prepared on Zn metal surface by a simple and facile self-adsorption strategy. The LPL exhibits extremely strong adhesion on Zn metal to provide stable interface during long-term cycling. In addition, the self-adsorption strategy triggered by the hydrophobicity-induced aggregation effect endows the protective layer with a gap-free and compacted morphology which can reject free water for effective side reaction inhibition performance. More importantly, the lysozyme conformation is transformed from α-helix to β-sheet structure before layer formation, thus abundant functional groups are exposed to interact with Zn2+ for electrical double layer (EDL) modification, desolvation energy decrease, and ion diffusion kinetics acceleration. Consequently, the LPL renders the symmetrical Zn battery with ultra-long cycling performance for more than 1200 h under high Zn depth of discharge (DOD) for 77.7%, and the Zn/Zn0.25V2O5 pouch cell with low N/P ratio of 2.1 at high Zn utilization of 48% for over 300 cycles. This study proposes a facile and low-cost method for constructing a stable protective layer of Zn metal for high Zn utilization aqueous devices.

Electrolyte Solvation Chemistry for Stabilizing the Zn Anode via Functionalized Organic Agents

As a potential candidate for grid-scale energy storage technology, aqueous Zn-ion batteries (ZIBs) have attracted considerable attention due to their intrinsic safety, environmental friendliness, and ease of fabrication. Nevertheless, the road to industry for this technique is hindered by serious issues, including undesired side reactions, random growth of the Zn dendrites, electrode passivation, and anode corrosion, which are associated with the high reactivity of water molecules during the electrochemical reactions. These challenges are strongly dependent on electrolyte solvation chemistry (ESC), which subsequently determines the electrochemical behavior of the metal ions and water molecules on the electrode surface. In this work, a comprehensive understanding of optimized ESC with specified functional groups on the mixing agents to stabilize the Zn anode is provided. First, the challenges facing the ZIBs and their chemical principles are outlined. Specific attention is paid to the working principles of the mixing agents with different functional groups. Then the recent progress is summarized and compared. Finally, perspectives on future research for the aqueous Zn batteries are presented from the point of view.

Molecular Engineering Enables Hydrogel Electrolyte with Ionic Hopping Migration and Self-Healability toward Dendrite-Free Zinc-Metal Anodes

Hydrogel electrolytes (HEs), characterized by intrinsic safety, mechanical stability, and biocompatibility, can promote the development of flexible aqueous zinc-ion batteries (FAZIBs). However, current FAZIB technology is severely restricted by the uncontrollable dendrite growth arising from undesirable reactions between the HEs with sluggish ionic conductivity and Zn metal. To overcome this challenge, this work proposes a molecular engineering strategy, which involves the introduction of oxygen-rich poly(urea-urethane) (OR-PUU) into polyacrylamide (PAM)-based HEs. The OR-PUU/PAM HEs facilitate rapid ion transfer through their ionic hopping migration mechanism, resulting in uniform and orderly Zn2+ deposition. The abundant polar groups on the OR-PUU molecules in OR-PUU/PAM HEs break the inherent H-bond network, tune the solvation structure of hydrated Zn2+, and inhibit the occurrence of side reactions. Moreover, the interaction of hierarchical H-bonds in the OR-PUU/PAM HEs endows them with self-healability, enabling in situ repair of cracks induced by plating/stripping. Consequently, Zn symmetric cells incorporating the novel OR-PUU/PAM HEs exhibit a long cycling life of 2000 h. The resulting Zn-MnO2 battery displays a low capacity decay rate of 0.009% over 2000 cycles at 2000 mA g-1. Overall, this work provides valuable insights to facilitate the realization of dendrite-free Zn-metal anodes through the molecular engineering of HEs.

Mechanically Excellent, Notch-Insensitive, and Highly Conductive Double-Network Hydrogel for Flexible Strain Sensor

A novel double-network conductive hydrogel based on lithium acetate/gelatin/polyacrylamide (PAAM) was synthesized by heating-cooling and subsequent γ-ray radiation-induced polymerization and cross-linking. Owing to the hydrogen bonding interaction between lithium acetate, physical cross-linked gelatin, and chemical cross-linked PAAM, the resultant hydrogel exhibited high tensile strength (1260 kPa), high ionic conductivity (35.2 mS cm-1), notch-insensitivity (tensile strength 415 kPa, elongation at break 872% with transverse notch), and extensive strain monitoring range (0.15-800%) under optimum conditions. The lithium acetate/gelatin/polyacrylamide hydrogel strain sensor attached to the skin can sensitively monitor the subtle movements of the human body. The strain sensor based on the resultant hydrogel with transverse notch can still work for 1200 cycles, due to that the covalent-cross-linked PAAm chain bridges the cracks and stabilizes the deformation, while the physical-cross-linked gelatin was unzipped to make the blunting of notch. The conductive hydrogel with high-sensitivity and high stability is expected to be used as materials for the preparation of flexible strain sensors in the future.

Flexible Zn-ion Electrochromic Batteries with Multiple-color Variations

Electrochromic batteries as emerging smart energy devices are highly sought after owing to their real-time energy monitoring through visual color conversion. However, their large-scale applicability is hindered by insufficient capacity, inadequate cycling stability, and limited color variation. Herein, a flexible Zn-ion electrochromic battery (ZIEB) was assembled with sodium vanadate (VONa+) cathode, ion-redistributing hydrogel electrolyte, and Zn anode to address these challenges. The electrolyte contains anchored -SO3 - and -NH3 +, which facilitates ionic transportation and prevents Zn dendrite formation by promoting orientated Zn2+ deposition on the Zn (002) surface. The ZIEB exhibits a continuous reversible color transition, ranging from fully charged orange to mid-charged brown and drained green. It also demonstrates a high specific capacity of 302.4 mAh ⋅ g-1 at 0.05 A ⋅ g-1 with a capacity retention of 96.3 % after 500 cycles at 3 A ⋅ g-1. Additionally, the ZIEB maintains stable energy output even under bending, rolling, knotting, and twisting. This work paves a new strategy for the design of smart energy devices in wearable electronics.

In situ Nafion-nanofilm oriented (002) Zn electrodeposition for long-term zinc-ion batteries

Dendrite growth and parasitic reactions of a Zn metal anode in aqueous media hinder the development of up-and-coming Zn-ion batteries. Optimizing the crystal growth after Zn nucleation is promising to enable stable cyclic performance of the anode, but directly regulating specific crystal plane growth for homogenized Zn electrodeposition remains highly challenging. Herein, a perfluoropolymer (Nafion) is introduced into an aqueous electrolyte to activate a thermodynamically ultrastable Zn/electrolyte interface for long-term Zn-ion batteries. The low adsorption energy (-2.09 eV) of Nafion molecules on Zn metal ensures the in situ formation of a Nafion-nanofilm during the first charge process. This ultrathin artificial solid electrolyte interface with zincophilic -SO3- groups guides the directional Zn2+ electrodeposition along the (002) crystal surface even at high current density, yielding a dendrite-free Zn anode. The synergic Zn/electrolyte interphase electrochemistry contributes an average coulombic efficiency of 99.71% after 4500 cycles for Zn‖Cu cells, and Zn‖Zn cells achieve an ultralong lifespan of over 7000 h at 5 mA cm-2. Besides, Zn‖MnO2 cells operate well over 3000 cycles. Even at -40 °C, Zn‖Zn cells achieve stable Zn2+ plating/stripping for 1200 h.

Critical Solvation Structures Arrested Active Molecules for Reversible Zn Electrochemistry

Aqueous Zn-ion batteries (AZIBs) have attracted increasing attention in next-generation energy storage systems due to their high safety and economic. Unfortunately, the side reactions, dendrites and hydrogen evolution effects at the zinc anode interface in aqueous electrolytes seriously hinder the application of aqueous zinc-ion batteries. Here, we report a critical solvation strategy to achieve reversible zinc electrochemistry by introducing a small polar molecule acetonitrile to form a "catcher" to arrest active molecules (bound water molecules). The stable solvation structure of [Zn(H2O)6]2+ is capable of maintaining and completely inhibiting free water molecules. When [Zn(H2O)6]2+ is partially desolvated in the Helmholtz outer layer, the separated active molecules will be arrested by the "catcher" formed by the strong hydrogen bond N-H bond, ensuring the stable desolvation of Zn2+. The Zn||Zn symmetric battery can stably cycle for 2250 h at 1 mAh cm-2, Zn||V6O13 full battery achieved a capacity retention rate of 99.2% after 10,000 cycles at 10 A g-1. This paper proposes a novel critical solvation strategy that paves the route for the construction of high-performance AZIBs.

Long-lifespan Zinc-ion Capacitors Enabled by Anodes Integrated with Interconnected Mesoporous Chitosan Membranes through Electrophoresis-driven Phase Separation

The advancement of highly secure and inexpensive aqueous zinc ion energy storage devices is impeded by issues, including dendrite growth, hydrogen evolution and corrosion of zinc anodes. It is essential to modify the interface of zinc anodes that homogenizes ion flux and facilitates highly reversible zinc planarized deposition and stripping. Herein, by coupling zinc ion coordination with acid-base neutralization under the driving of electrophoresis, manageable mesoscopic phase separation for constructing chitosan frameworks was achieved, thereby fabricating interconnected mesoporous chitosan membranes based heterogeneous quasi-solid-state electrolytes integrated with anodes. The framework is constructed by twisted chitosan nanofiber bundles, forming a three-dimensional continuous spindle-shaped pore structure. With this framework, the electrolyte provides exceptional ion conductivity of 25.1 mS cm-1 , with a puncture resistance strength of 2.3 GPa. In addition, the amino groups of chitosan molecule can make the surface of the framework positively charged. Thus, reversible zinc planarized deposition is successfully induced by the synergistic effect of stress constraint and electrostatic modulation. As a result, as-assembled zinc ion capacitor has an excellent cycle life and sustains the capacity by over 95 % after 20000 cycles at a current density of 5 A g-1 . This research presents a constructive strategy for stable electrolytes-integrated zinc anodes.

Hybrid Organic-Inorganic Additive for Robust Al Anode in Alkaline Aluminum-Air Battery

Aluminum-air batteries (AABs), known for their high energy density, environmental friendliness, and cost-effectiveness, show immense promise in the realm of energy conversion applications. Nonetheless, their commercialization has encountered inherent challenges of Al anode corrosion and material degradation. In this study, economical hybrid electrolyte additives to inhibit the Al corrosion are developed, safeguarding the integrity of the Al anode. Due to the synergistic interplay between the organic compound dithiothreitol, and inorganic compounds zinc chloride, a robust zinc film is formed on the Al surface This Zn film plays a pivotal role in quelling parasitic hydrogen evolution reactions that typically can plague the Al electrode. Consequently, the as-prepared hybrid additive culminates in a remarkable enhancement to AABs, delivering exceptional discharge capacity of 1793.37 mAh g-1 , high energy density of 2047 Wh kg-1 , and excellent battery longevity (over 20 h in on/off cycling tests). This study, therefore, introduces a novel approach in utilizing hybrid electrolyte additives to effectively counteract corrosion-related challenges and boost the stability and performance of AABs.

Thermally Healable Electrolyte-Electrode Interface for Sustainable Quasi-Solid Zinc-ion Batteries

Quasi-solid zinc-ion batteries using hydrogel electrolytes show great potential in energy storage devices owing to their intrinsic safety, fewer side reactions and wide electrochemical windows. However, the dendrite issues on the zinc anodes cannot be fundamentally eliminated and the intrinsic anode-electrolyte interfacial interspace is rarely investigated. Here, we design a dynamically healable gelatin-based hydrogel electrolyte with a highly reversible sol-gel transition, which can construct a conformal electrode-electrolyte interface and further evolve into a stable solid-solid interface by in situ solidification. The unique helical gelatin chain structure provides a uniform channel for zinc ion transport by the bridging effect of sulfate groups. As a consequence, the dynamically healable interface enables dendrite-free zinc anodes and repeatedly repairs the anode-electrolyte interfacial interspaces by the reversible sol-gel transition of gelatin electrolyte to retain long-lasting protection for sustainable zinc-ion batteries.

A Sustainable Dual Cross-Linked Cellulose Hydrogel Electrolyte for High-Performance Zinc-Metal Batteries

Aqueous rechargeable Zn-metal batteries (ARZBs) are considered one of the most promising candidates for grid-scale energy storage. However, their widespread commercial application is largely plagued by three major challenges: The uncontrollable Zn dendrites, notorious parasitic side reactions, and sluggish Zn2+ ion transfer. To address these issues, we design a sustainable dual cross-linked cellulose hydrogel electrolyte, which has excellent mechanical strength to inhibit dendrite formation, high Zn2+ ions binding capacity to suppress side reaction, and abundant porous structure to facilitate Zn2+ ions migration. Consequently, the Zn||Zn cell with the hydrogel electrolyte can cycle stably for more than 400 h under a high current density of 10 mA cm-2. Moreover, the hydrogel electrolyte also enables the Zn||polyaniline cell to achieve high-rate and long-term cycling performance (> 2000 cycles at 2000 mA g-1). Remarkably, the hydrogel electrolyte is easily accessible and biodegradable, making the ARZBs attractive in terms of scalability and sustainability.

Design Strategies for Aqueous Zinc Metal Batteries with High Zinc Utilization: From Metal Anodes to Anode-Free Structures

Aqueous zinc metal batteries (AZMBs) are promising candidates for next-generation energy storage due to the excellent safety, environmental friendliness, natural abundance, high theoretical specific capacity, and low redox potential of zinc (Zn) metal. However, several issues such as dendrite formation, hydrogen evolution, corrosion, and passivation of Zn metal anodes cause irreversible loss of the active materials. To solve these issues, researchers often use large amounts of excess Zn to ensure a continuous supply of active materials for Zn anodes. This leads to the ultralow utilization of Zn anodes and squanders the high energy density of AZMBs. Herein, the design strategies for AZMBs with high Zn utilization are discussed in depth, from utilizing thinner Zn foils to constructing anode-free structures with theoretical Zn utilization of 100%, which provides comprehensive guidelines for further research. Representative methods for calculating the depth of discharge of Zn anodes with different structures are first summarized. The reasonable modification strategies of Zn foil anodes, current collectors with pre-deposited Zn, and anode-free aqueous Zn metal batteries (AF-AZMBs) to improve Zn utilization are then detailed. In particular, the working mechanism of AF-AZMBs is systematically introduced. Finally, the challenges and perspectives for constructing high-utilization Zn anodes are presented.

Polysaccharide-Based Double-Network Hydrogels: Polysaccharide Effect, Strengthening Mechanisms, and Applications

Polysaccharides are carbohydrate polymers that are major components of plants, animals, and microorganisms, with unique properties. Biological hydrogels are polymeric networks that imbibe and retain large amounts of water and are the major components of living organisms. The mechanical properties of hydrogels are critical for their functionality and applications. Since synthetic polymeric double-network (DN) hydrogels possess unique network structures with high and tunable mechanical properties, many natural functional polysaccharides have attracted increased attention due to their rich and convenient sources, unique chemical structure and chain conformation, inherently desirable cytocompatibility, biodegradability and environmental friendliness, diverse bioactivities, and rheological properties, which rationally make them prominent constituents in designing various strong and tough polysaccharide-based DN hydrogels over the past ten years. This review focuses on the latest developments of polysaccharide-based DN hydrogels to comprehend the relationship among the polysaccharide properties, inner strengthening mechanisms, and applications. The aim of this review is to provide an insightful mechanical interpretation of the design strategy of novel polysaccharide-based DN hydrogels and their applications by introducing the correlation between performance and composition. The mechanical behavior of DN hydrogels and the roles of varieties of marine, microbial, plant, and animal polysaccharides are emphatically explained.

Trapping High-Activity Water in Nature-Inspired Plant-Derived Separator to Realize Ultrastable Interfacial Chemistry of Zn Anode

Side reactions caused by highly active water molecules, including severe corrosion, hydrogen evolution, and dendrite growth, are impediments to the advancement of aqueous zinc ion batteries (ZIBs). Here, inspired by the pivotal role of plant fibers to prevent dehydration in nature, we designed a unique water-retaining plant fiber (WRPF) separator with strong hygroscopic ability to adsorb and trap water molecules. Elaborated theoretical and experimental characterizations prove that high-activity water could be sequestered by a WRPF separator, alleviating water-induced side reactions and accelerating the desolvation of hydrate Zn2+. Prominently, reversible Zn plating and stripping could be realized in Zn//Cu batteries. Even with elevated cathodic mass loading (21.94 mg cm-2), the Zn//VS2 full cell delivers high areal capacity 3.3 mAh cm-2 and well-maintained stability. The present study offers a versatile design strategy for separators using nature-inspired materials, aiming to address the challenging issue of "water" and achieve ultrastable interfacial chemistry of Zn anode.

Porous Cyclodextrin Polymer Enables Dendrite-Free and Ultra-Long Life Solid-State Zn-I2 Batteries

Zn-I2 batteries have attracted attention due to their low cost, safety, and environmental friendliness. However, their performance is still limited by the irreversible growth of Zn dendrites, hydrogen evolution reactions, corrosion, and shuttle effect of polyiodide. In this work, we have prepared a new porous polymer (CD-Si) by nucleophilic reaction of β-cyclodextrin with SiCl4 , and CD-Si is applied to the solid polymer electrolyte (denoted PEO/PVDF/CD-Si) to solve above-mentioned problems. Through the anchoring of the CD-Si, a conductive network with dual transmission channels was successfully constructed. Due to the non-covalent anchoring effect, the ionic conductivity of the solid polymer electrolytes (SPE) can reach 1.64×10-3  S cm-1 at 25 °C. The assembled symmetrical batteries can achieve highly reversible dendrite-free galvanizing/stripping (stable cycling for 7500 h at 5 mA cm-2 and 1200 h at 20 mA cm-2 ). The solid-state Zn-I2 battery shows an ultra-long life of over 35,000 cycles at 2 A g-1 . Molecular dynamics simulations are performed to elucidate the working mechanism of CD-Si in the polymer matrix. This work provides a novel strategy towards solid electrolytes for Zn-I2 batteries.

Guiding Zn Uniform Deposition with Polymer Additives for Long-lasting and Highly Utilized Zn Metal Anodes

The parasitic side reaction on Zn anode is the key issue which hinders the development of aqueous Zn-based energy storage systems on power-grid applications. Here, a polymer additive (PMCNA) engineered by copolymerizing 2-methacryloyloxyethyl phosphorylcholine (MPC) and N-acryloyl glycinamide (NAGA) was employed to regulate the Zn deposition environment for satisfying side reaction inhibition performance during long-term cycling with high Zn utilization. The PMCNA can preferentially adsorb on Zn metal surface to form a uniform protective layer for effective water molecule repelling and side reaction resistance. In addition, the PMCNA can guide Zn nucleation and deposition along 002 plane for further side reaction and dendrite suppression. Consequently, the PMCNA additive can enable the Zn//Zn battery with an ultrahigh depth of discharge (DOD) of 90.0 % for over 420 h, the Zn//active carbon (AC) capacitor with long cycling lifespan, and the Zn//PANI battery with Zn utilization of 51.3 % at low N/P ratio of 2.6.

Hydrogel Electrolyte Enabled High-Performance Flexible Aqueous Zinc Ion Energy Storage Systems toward Wearable Electronics

To cater to the swift advance of flexible wearable electronics, there is growing demand for flexible energy storage system (ESS). Aqueous zinc ion energy storage systems (AZIESSs), characterizing safety and low cost, are competitive candidates for flexible energy storage. Hydrogels, as quasi-solid substances, are the appropriate and burgeoning electrolytes that enable high-performance flexible AZIESSs. However, challenges still remain in designing suitable and comprehensive hydrogel electrolyte, which provides flexible AZIESSs with high reversibility and versatility. Hence, the application of hydrogel electrolyte-based AZIESSs in wearable electronics is restricted. A thorough review is required for hydrogel electrolyte design to pave the way for high-performance flexible AZIESSs. This review delves into the engineering of desirable hydrogel electrolytes for flexible AZIESSs from the perspective of electrolyte designers. Detailed descriptions of hydrogel electrolytes in basic characteristics, Zn anode, and cathode stabilization effects as well as their functional properties are provided. Moreover, the application of hydrogel electrolyte-based flexible AZIESSs in wearable electronics is discussed, expecting to accelerate their strides toward lives. Finally, the corresponding challenges and future development trends are also presented, with the hope of inspiring readers.

Improved Interfacial Ion Migration and Deposition through the Chain-Liquid Synergistic Effect by a Carboxylated Hydrogel Electrolyte for Stable Zinc Metal Anodes

The large-scale applicability of Zn-metal anodes is severely impeded by the issues such as the dendrite growth, complicated hydrogen evolution, and uncontrollable passivation reaction. Herein, a negatively charged carboxylated double-network hydrogel electrolyte (Gelatin/Sodium alginate-acetate, denoted as Gel/SA-acetate) has been developed to stabilize the interfacial electrochemistry, which restructures a type of Zn2+ ion solvent sheath optimized via a chain-liquid synergistic effect. New hydrogen bonds are reconstructed with water molecules by the zincophilic functional groups, and directional migration of hydrated Zn2+ ions is therefore induced. Concomitantly, the robust chemical bonding of such hydrogel layers to the Zn slab exhibits a desirable anti-catalytic effect, thereby greatly diminishing the water activity and eliminating side reactions. Subsequently, a symmetric cell using the Gel/SA-acetate electrolyte demonstrates a reversible plating/stripping performance for 1580 h, and an asymmetric cell reaches a state-of-the-art runtime of 5600 h with a high average Coulombic efficiency of 99.9 %. The resultant zinc ion hybrid capacitors deliver exceptional properties including the capacity retention of 98.5 % over 15000 cycles, energy density of 236.8 Wh kg-1 , and high mechanical adaptability. This work is expected to pave a new avenue for the development of novel hydrogel electrolytes towards safe and stable Zn anodes.

Triple-function Hydrated Eutectic Electrolyte for Enhanced Aqueous Zinc Batteries

Aqueous rechargeable zinc-ion batteries (ARZBs) are impeded by the mutual problems of unstable cathode, electrolyte parasitic reactions, and dendritic growth of zinc (Zn) anode. Herein, a triple-functional strategy by introducing the tetramethylene sulfone (TMS) to form a hydrated eutectic electrolyte is reported to ameliorate these issues. The activity of H2 O is inhibited by reconstructing hydrogen bonds due to the strong interaction between TMS and H2 O. Meanwhile, the preferentially adsorbed TMS on the Zn surface increases the thickness of double electric layer (EDL) structure, which provides a shielding buffer layer to suppress dendrite growth. Interestingly, TMS modulates the primary solvation shell of Zn2+ ultimately to achieve a novel solvent co-intercalation ((Zn-TMS)2+ ) mechanism, and the intercalated TMS works as a "pillar" that provides more zincophilic sites and stabilizes the structure of cathode (NH4 V4 O10 , (NVO)). Consequently, the Zn||NVO battery exhibits a remarkably high specific capacity of 515.6 mAh g-1 at a low current density of 0.2 A g-1 for over 40 days. This multi-functional electrolytes and solvent co-intercalation mechanism will significantly propel the practical development of aqueous batteries.

Flexible All-in-one Quasi-Solid-State Batteries Enabled by Low-water-content Hydrogel Films

The high conductivities and good mechanical properties of hydrogel electrolyte films are critical for energy storage devices with high flexibility, fast redox kinetics, and long life. Herein, a low water content (6.63 wt%) hydrogel film is prepared, and a favorable environment is created, with an electrochemical stability window of 2.26 V and a high ionic conductivity of 2.6 mS cm-1 . The hydrogel film exhibits good folding ability, low in-plane swelling, and anti-freezing abilities. These properties are benefitted by immobilizing free water molecules on the abundant oxygenic groups of polymer fibers in the hydrogel film, offering a unique 3D channel to allow Li+ to quickly transport along the polymer network. Therefore, the hydrogel film-based all-in-one flexible cell exhibits stable cycling performance with a retention of 81.8% of the initial capacity after 500 cycles at room temperature and 66.2% of capacity retention at -30 °C. Furthermore, the full cell with high cathode loading (≈21 mg cm-2 ) exhibits a high areal capacity of 2.5 mAh cm-2 (≈119 mAh g-1 ). The overall merits of flexible all-in-one quasi-solid-state batteries demonstrate high potential to be used for power wearable electronics.

Alleviating Side Reactions on Zn Anodes for Aqueous Batteries by a Cell Membrane Derived Phosphorylcholine Zwitterionic Protective Layer

Aqueous zinc (Zn) ion batteries are attractive for next generation batteries with high safety, yet their applications are still hindered by the uncontrollable dendrite formation and side reactions on Zn anode. Here, a polyzwitterion protective layer (PZIL) was engineered by polymerizing 2-methacryloyloxyethyl phosphorylcholine (MPC) in carboxymethyl chitosan (CMCS), which renders the following merits: the choline groups of MPC can preferentially adsorb onto Zn metal to avoid side reactions; the charged phosphate groups chelate with Zn2+ to regulate the solvation structure, further improving side reaction inhibition; the Hofmeister effect between ZnSO4 and CMCS can enhance the interfacial contact during electrochemical characterization. Consequently, the symmetrical Zn battery with PZIL can keep stable for more than 1000 hours under the ultra-high current density of 40 mA cm-2 . The PZIL confers the Zn/MnO2 full battery and Zn/active carbon (AC) capacitor with stable cycling performance under high current density.