New Emerging Fast Charging Microscale Electrode Materials

Fast charging lithium (Li)-ion batteries are intensively pursued for next-generation energy storage devices, whose electrochemical performance is largely determined by their constituent electrode materials. While nanosizing of electrode materials enhances high-rate capability in academic research, it presents practical limitations like volumetric packing density and high synthetic cost. As an alternative to nanosizing, microscale electrode materials cannot only effectively overcome the limitations of the nanosizing strategy but also satisfy the requirement of fast-charging batteries. Therefore, this review summarizes the new emerging microscale electrode materials for fast charging from the commercialization perspective. First, the fundamental theory of electronic/ionic motion in both individual active particles and the whole electrode is proposed. Then, based on these theories, the corresponding optimization strategies are summarized toward fast-charging microscale electrode materials. In addition, advanced functional design to tackle the mechanical degradation problems related to next generation high capacity alloy- and conversion-type electrode materials (Li, S, Si et al.) for achieving fast charging and stable cycling batteries. Finally, general conclusions and the future perspective on the potential research directions of microscale electrode materials are proposed. It is anticipated that this review will provide the basic guidelines for both fundamental research and practical applications of fast-charging batteries.

Electrolyte and Interphase Engineering of Aqueous Batteries Beyond "Water-in-Salt" Strategy

Aqueous batteries are promising alternatives to non-aqueous lithium-ion batteries due to their safety, environmental impact, and cost-effectiveness. However, their energy density is limited by the narrow electrochemical stability window (ESW) of water. The "Water-in-salts" (WIS) strategy is an effective method to broaden the ESW by reducing the "free water" in the electrolyte, but the drawbacks (high cost, high viscosity, poor low-temperature performance, etc.) also compromise these inherent superiorities. In this review, electrolyte and interphase engineering of aqueous batteries to overcome the drawbacks of the WIS strategy are summarized, including the developments of electrolytes, electrode-electrolyte interphases, and electrodes. First, the main challenges of aqueous batteries and the problems of the WIS strategy are comprehensively introduced. Second, the electrochemical functions of various electrolyte components (e.g., additives and solvents) are summarized and compared. Gel electrolytes are also investigated as a special form of electrolyte. Third, the formation and modification of the electrolyte-induced interphase on the electrode are discussed. Specifically, the modification and contribution of electrode materials toward improving the WIS strategy are also introduced. Finally, the challenges of aqueous batteries and the prospects of electrolyte and interphase engineering beyond the WIS strategy are outlined for the practical applications of aqueous batteries.

Dietary Copper Intake and Risk of Parkinson's Disease: a Cross-sectional Study

Copper is an essential trace element for the human body. The epidemiological evidence for the association of dietary intake of copper with the risk of Parkinson's disease (PD) is limited. We conducted an evaluation of the cross-sectional data gathered from the National Health and Nutrition Examination Surveys spanning from 2007 to 2018, which comprised a total of 17,948 participants. To discern the distinct characteristics of the participants, we performed a univariate analysis and utilized a 1:2 ratio propensity score matching method to minimize the effects of selection bias. We employed weighted univariate as well as three multivariate logistic regression models both prior to and following matching, with the aim of examining the association between dietary copper intake and PD risk. Finally, we used the restricted cubic spline (RCS) methodology in order to investigate possible non-linear relationships. Furthermore, subgroup analysis was undertaken to elicit further understanding concerning the association between copper intake and PD. A negative correlation resulted between dietary copper intake and PD risk in both univariate and multivariate logistic regression models, prior to and following matching. Our findings demonstrate that there is a nonlinear, dose-dependent relationship between copper intake and PD, according to our RCS analysis. In subgroup analysis, copper intake was identified as an important protective factor for individuals who were non-Hispanic White, unmarried, and had completed higher education. Dietary copper intake was associated with the risk of PD. Supplementation of dietary copper may have potentially beneficial effects.

High-Fluidity/High-Strength Dual-Layer Gel Electrolytes Enable Ultra-Flexible and Dendrite-Free Fiber-Shaped Aqueous Zinc Metal Battery

Fiber-shaped aqueous zinc-ion batteries (FAZIBs) with intrinsic safety, highcapacity, and superb omnidirectional flexibility hold promise for wearable energy-supply devices. However, the interfacial separation of fiber-shaped electrodes and electrolytes caused by Zinc (Zn) stripping process and severe Zn dendrites occurring at the folded area under bending condition seriously restricts FAZIBs' practical application. Here, an advanced confinement encapsulation strategy is originally reported to construct dual-layer gel electrolyte consisting of high-fluidity polyvinyl alcohol-Zn acetate inner layer and high-strength Zn alginate outer layer for fiber-shaped Zn anode. Benefiting from the synergistic effect of inner-outer gel electrolyte and the formation of solid electrolyte interphase on Zn anode surface by lysine additive, the resulting fiber-shaped Zn-Zn symmetric cell delivers long cycling life over 800 h at 1 mA cm-2 with dynamic bending frequency of 0.1 Hz. The finite element simulation further confirms that dual-layer gel electrolyte can effectively suppress the interfacial separation arising from the Zn stripping and bending process. More importantly, a robust twisted fiber-shaped Zn/zinc hexacyanoferrate battery based on dual-layer gel electrolyte is successfully assembled, achieving a remarkable capacity retention of 97.7% after bending 500 cycles. Therefore, such novel dual-layer gel electrolyte design paves the way for the development of long-life fiber-shaped aqueous metal batteries.

Molecular Engineering Enables Hydrogel Electrolyte with Ionic Hopping Migration and Self-Healability toward Dendrite-Free Zinc-Metal Anodes

Hydrogel electrolytes (HEs), characterized by intrinsic safety, mechanical stability, and biocompatibility, can promote the development of flexible aqueous zinc-ion batteries (FAZIBs). However, current FAZIB technology is severely restricted by the uncontrollable dendrite growth arising from undesirable reactions between the HEs with sluggish ionic conductivity and Zn metal. To overcome this challenge, this work proposes a molecular engineering strategy, which involves the introduction of oxygen-rich poly(urea-urethane) (OR-PUU) into polyacrylamide (PAM)-based HEs. The OR-PUU/PAM HEs facilitate rapid ion transfer through their ionic hopping migration mechanism, resulting in uniform and orderly Zn2+ deposition. The abundant polar groups on the OR-PUU molecules in OR-PUU/PAM HEs break the inherent H-bond network, tune the solvation structure of hydrated Zn2+ , and inhibit the occurrence of side reactions. Moreover, the interaction of hierarchical H-bonds in the OR-PUU/PAM HEs endows them with self-healability, enabling in situ repair of cracks induced by plating/stripping. Consequently, Zn symmetric cells incorporating the novel OR-PUU/PAM HEs exhibit a long cycling life of 2000 h. The resulting Zn-MnO2 battery displays a low capacity decay rate of 0.009% over 2000 cycles at 2000 mA g-1 . Overall, this work provides valuable insights to facilitate the realization of dendrite-free Zn-metal anodes through the molecular engineering of HEs.

Investigation on the construction of teaching case base in medical genetics

Medical genetics is a basic medical course that discusses the diagnosis, prevention and treatment of diseases in relation with genetic factors. This course requires students who have abilities of strong logical thinking, independent thinking, problem analyzing and solving. Single "cramming" teaching is difficult to mobilize students' autonomous learning, and hardly achieves teaching effect of medical genetics. Teaching of case-based discussion breaks passive teaching mode in traditional class. The teacher throws out typically clinical cases. The students prepare materials around relevant problems of cases, and carry out class discussion. Then, key and difficult points of the course are integrated in teaching and learning interaction, which reaches a remarkable effect of teaching. Since 2013, the teaching and research group has carried out teaching of case-based discussion in undergraduates majoring in clinical medicine. In this paper, we screen and sort clinical cases on the basis of course teaching plan and case-based discussion in the teaching of medical genetics. The cases are summarized into 8 chapters in teaching case base, which basically cover the teaching of disease genetics and clinical genetics.The construction of teaching case base in medical genetics has realized the deep integration of clinical cases and teaching. Students can understand and master important and difficult points of teaching in a more intuitive way, which is helpful to stimulate students' innovative thinking, improve students' learning interest and class participation.

In Situ Etching of Multifunctional Three-Dimensional Interfacial Layers for the Construction of Porous Zn Anodes with Enhanced Surface Textures

Aqueous Zn-ion batteries offer the advantages of greater security and lower fabrication costs over their lithium-ion counterparts. However, their further advancement and practical application are hindered by the drastic decay in their performance due to the uncontrollable dendrite growth on Zn anodes. In this study, we fabricated a versatile three-dimensional (3D) interfacial layer (3D PVDF-Zn(TFO)2 (PVDF: poly(vinylidene fluoride); TFO: trifluoromethanesulfonate), which simultaneously formed porous Zn-metal anodes (PZn) with an enhanced (002) texture, via a in situ etching scheme. The 3D PVDF-Zn(TFO)2@PZn symmetrical cells leverage the advantages of surface coating and 3D porous architectures to yield extra-long cyclic lifetimes of over 5300 h (0.1 mA cm-2). The fabricated anodes were found to be compatible with MnO2 cathodes, and the resulting full batteries delivered an outstanding capacity of 336 mAh g-1 at 0.1 A g-1 and exhibited impressive long-term reversibility with a capacity retention of 78.7% for 2000 cycles. The proposed coating strategy is viable for developing porous structures with cutting-edge designs and for textured surface engineering.

Reliable lateral Zn deposition along (002) plane by oxidized PAN separator for zinc-ion batteries

Aqueous zinc ion batteries (AZIBs) are the promising candidate for energy storage where safety and low cost are the major concerns. However, the uneven and random electrodeposition of Zn has become a serious impediment to the deep recharging of AZIBs. Conventional modifications on zinc substrate can promote homogenous zinc deposition initially, but not sustainably. Here, an oxidized polyacrylonitrile (OPAN) membrane with a conjugated planar structure is proposed as a zinc ion battery separator. This separator can continuously regulate the growth of Zn with (002) texture to inhibit dendrites. In addition, the separator has a fast Zn2+ ion transfer, which can spontaneously repel SO42- and relieve side reactions. As a result, the Zn-symmetric batteries show cycle lifetime of more than 1300 hours at 1 mA cm-2 and 1 mA h cm-2, and kept stable for more than 160 hours even at 65% high discharge of depth (DOD). The MnO2//Zn full celled assembled with an OPAN separator had very little decay for 5000 cycles at 2 A g-1. This work provides a new method for realizing the continuous and uniform deposition of Zn metals, which also provides a new route for batteries with metallic anodes.

Research Progress on the Mechanism of Acupuncture in the Prevention and Treatment of Allergic Rhinitis

Objective

To research the mechanism of acupuncture and moxibustion in treating and preventing allergic rhinitis.

Methods

We searched PubMed; Google Scholar; Semantic Scholar; Academic Keys; Citation; Dimensions; EuroPub; Index (A & HCI); Compendex; Conference Proceedings Citation; and Science Citation Index. We reviewed the mechanism of acupuncture and moxibustion in the prevention and treatment of allergic rhinitis from the perspectives of Th1/Th2 balance regulation, IgE level reduction, lowering of inflammatory cell infiltration in the nasal mucosa, regulation of nasal neuropeptide (substance P) level, inhibition of Toll-like receptors, and NFκB protein expression.

Results

Acupuncture can play a therapeutic role in AR. Combining different aspects such as the influence on Th1 and Th2 subsets of cells, regulation of Th1/Th2 balance, reduction of IgE level, reduction of inflammatory cell infiltration in the nasal mucosa, regulation of nasal neuropeptide (substance P) level, inhibition of Toll-like receptor, and NFκB protein expression, the mechanism of action of acupuncture for AR can be elucidated more comprehensively.

Conclusion

Acupuncture and moxibustion can be used to treat allergic rhinitis in several ways.

Elevated visceral adiposity index linked to improved cognitive function in middle-aged and elderly Chinese: evidence from the China health and retirement longitudinal study

Object

Cognitive decline and obesity are major global public health issues, and their association has been widely acknowledged. The link between the visceral adiposity index (VAI) and cognitive function in the Chinese population remains uncertain. This study aims to investigate the effects of VAI levels on cognitive function in the Chinese middle-aged and elderly population.

Methods

We analyzed longitudinal data from the China Health and Retirement Longitudinal Study (CHARLS) collected in 2011, 2013, 2015, and 2018. VAI levels were divided into three tertiles. Generalized estimating equation (GEE) models were used to explore the relationships between VAI levels and cognitive function, including overall cognitive scores, episodic memory, and mental status. Adjustments were made for potential confounders.

Results

The study consisted of 2,677 participants. Contrary to expectations, higher VAI levels were associated with higher overall cognitive scores and improved episodic memory scores, while no significant effect was observed on mental status. The GEE models consistently indicated that higher VAI levels were associated with higher overall cognitive scores, primarily due to their association with episodic memory. Stratified analyses revealed that the VAI was associated with better cognitive function primarily in males, individuals under 60 years old, those with lower education levels, rural residents, and married individuals, mainly in relation to episodic memory. No significant interactions were observed between VAI and demographic factors.

Conclusion

Our findings suggest that higher visceral adiposity is associated with slower cognitive decline in the Chinese middle-aged and elderly population, especially in its association with episodic memory. These results underline the need to further investigate the potential protective role of visceral fat in cognitive function, potentially offering new insights for interventions to enhance cognitive function and prevent dementia in this population.

Sintilimab-induced inflammatory myopathy in a patient with esophageal cancer: a case report

The use of immune checkpoint inhibitors (ICIs) has shown remarkable efficacy in the treatment of various malignancies, significantly reshaping cancer treatment. However, as a result of the widespread use of ICIs, several immune-related adverse events (iRAEs) have emerged, some of which can be rare and potentially fatal. In this paper, we reported the earliest case of Sintilimab used in the treatment of esophageal cancer with severe inflammatory myopathy (involving the cardiac, respiratory, and skeletal muscles)in China. This patient was an elderly female who presented to our institution with progressive limb weakness and ptosis. Prior to the onset of symptoms, the patient had undergone a radical esophagectomy for esophageal cancer, experienced several cycles of of radiotherapy and chemotherapy, as well as two doses of Sintilimab treatment. Shortly after initiating immunotherapy, the patient developed symptoms including bilateral ptosis, limb weakness, and difficulty swallowing and breathing. The levels of creatine kinase and troponin I in the patient's blood were significantly elevated, and positive results were observed for anti-skeletal and anti-cardiac muscle antibodies, indicating that the patient might be developing ICIs-related inflammatory myopathy. Fortunately, the patient responded well to treatment including corticosteroids, plasmapheresis, intravenous immunoglobulin, and other supportive therapies. Here, we discuss the incidence, mechanisms, and management strategies of fatal iRAEs. Early detection and timely intervention may be critical in reducing the incidence and mortality rates of iRAEs and improving patient outcomes.

Insights into Electrode Architectures and Lithium-Ion Transport in Polycrystalline V2 O5 Cathodes of Solid-State Batteries

Polymer-based solid-state batteries (SSBs) have received increasing attentions due to the absence of interfacial problems in sulfide/oxide-type SSBs, but the lower oxidation potential of polymer-based electrolytes greatly limits the application of conventional high-voltage cathode such as LiNix Coy Mnz O2 (NCM) and lithium-rich NCM. Herein, this study reports on a lithium-free V2 O5 cathode that enables the applications of polymer-based solid-state electrolyte (SSE) with high energy density due to the microstructured transport channels and suitable operational voltage. Using a synergistic combination of structural inspection and non-destructive X-ray computed tomography (X-CT), it interprets the chemo-mechanical behavior that determines the electrochemical performance of the V2 O5 cathode. Through detailed kinetic analyses such as differential capacity and galvanostatic intermittent titration technique (GITT), it is elucidated that the hierarchical V2 O5 constructed through microstructural engineering exhibits smaller electrochemical polarization and faster Li-ion diffusion rates in polymer-based SSBs than those in the liquid lithium batteries (LLBs). By the hierarchical ion transport channels created by the nanoparticles against each other, superior cycling stability (≈91.7% capacity retention after 100 cycles at 1 C) is achieved at 60 °C in polyoxyethylene (PEO)-based SSBs. The results highlight the crucial role of microstructure engineering in designing Li-free cathodes for polymer-based SSBs.

Whole-exome sequencing enables rapid and prenatal diagnosis of inherited skin disorders

BACKGROUND

Genodermatoses are a broad group of disorders with specific or non-specific skin-based phenotypes, most of which are monogenic disorders. However, it's a great challenge to make a precise molecular diagnosis because of the clinical heterogeneity. The genetic and clinical heterogeneity brings great challenges for diagnosis in dermatology. The whole exome sequencing (WES) not only expedites the discovery of the genetic variations, but also contributes to genetic counselling and prenatal diagnosis.

MATERIALS AND METHODS

Followed by the initial clinical and pathological diagnosis, genetic variations were identified by WES. The pathogenicity of the copy number variations (CNVs) and single-nucleotide variants (SNVs) were evaluated according to ACMG guidelines. Candidate pathogenic SNVs were confirmed by Sanger sequencing in the proband and the family members.

RESULTS

Totally 25 cases were recruited. Nine novel variations, including c.5546G > C and c.1457delC in NF1, c.6110G > T in COL7A1, c.2127delG in TSC1, c.1445 C > A and c.1265G > A in TYR, Xp22.31 deletion in STS, c.908 C > T in ATP2A2, c.1371insC in IKBKG, and nine known ones were identified in 16 cases (64%). Prenatal diagnosis was applied in 6 pregnant women by amniocentesis, two of whom carried positive findings.

CONCLUSIONS

Our findings highlighted the value of WES as a first-tier genetic test in determining the molecular diagnosis. We also discovered the distribution of genodermatoses in this district, which provided a novel clinical dataset for dermatologists.

High-Voltage and Stable Manganese Hexacyanoferrate/Zinc Batteries Using Gel Electrolytes

Because of the high safety and environmental friendliness, aqueous zinc-ion batteries have gained a lot of attention in recent years. Prussian blue and its analogues are regarded as a promising cathode material of zinc-ion batteries. Manganese hexacyanoferrate is appropriate among them due to its high operating voltage, large capacity, and cheap price. However, the poor cycling stability of manganese hexacyanoferrate, mainly caused by transition metal dissolution, side reaction, and phase transition, greatly restricts its practical application. In this work, gelatin is used to limit the content of free water in the electrolyte, thus reducing the dissolution effect of transition metal manganese. The introduction of gelatin improves the durability of the Zn anode as well. The optimized MnHCF/gel-0.3/Zn battery displays a high reversible capacity (120 mAh·g^-1 at 0.1 A·g^-1), an excellent rate performance (42.7 mAh·g^-1 at 2 A·g^-1), and a good capacity retention (65% at 0.5 A·g^-1 after 1000 cycles).

Electronic and Optoelectronic Monolayer WSe2 Devices via Transfer-Free Fabrication Method

Monolayer transition metal dichalcogenides (TMDs) have drawn significant attention for their potential applications in electronics and optoelectronics. To achieve consistent electronic properties and high device yield, uniform large monolayer crystals are crucial. In this report, we describe the growth of high-quality and uniform monolayer WSe₂ film using chemical vapor deposition on polycrystalline Au substrates. This method allows for the fabrication of continuous large-area WSe₂ film with large-size domains. Additionally, a novel transfer-free method is used to fabricate field-effect transistors (FETs) based on the as-grown WSe₂. The exceptional metal/semiconductor interfaces achieved through this fabrication method result in monolayer WSe₂ FETs with extraordinary electrical performance comparable to those with thermal deposition electrodes, with a high mobility of up to ≈62.95 cm² V^-1 s^-1 at room temperature. In addition, the as-fabricated transfer-free devices can maintain their original performance after weeks without obvious device decay. The transfer-free WSe₂-based photodetectors exhibit prominent photoresponse with a high photoresponsivity of ~1.7 × 10⁴ A W^-1 at V_ds = 1 V and V_g = -60 V and a maximum detectivity value of ~1.2 × 10¹³ Jones. Our study presents a robust pathway for the growth of high-quality monolayer TMDs thin films and large-scale device fabrication.

Diagnostic value and mechanism of plasma S100A1 protein in acute ischemic stroke: a prospective and observational study

Background

Plasma S100A1 protein is a novel inflammatory biomarker associated with acute myocardial infarction and neurodegenerative disease's pathophysiological mechanisms. This study aimed to determine the levels of this protein in patients with acute ischemic stroke early in the disease progression and to investigate its role in the pathogenesis of acute ischemic stroke.

Methods

A total of 192 participants from hospital stroke centers were collected for the study. Clinically pertinent data were recorded. The volume of the cerebral infarction was calculated according to the Pullicino formula. Multivariate logistic regression analysis was used to select independent influences. ROC curve was used to analyze the diagnostic value of AIS and TIA. The correlation between S100A1, NF-κB p65, and IL-6 levels and cerebral infarction volume was detected by Pearson correlation analysis.

Results

There were statistically significant differences in S100A1, NF-κB p65, and IL-6 among the AIS,TIA, and PE groups (S100A1, [230.96 ± 39.37] vs [185.85 ± 43.24] vs [181.47 ± 27.39], P < 0.001; NF-κB p65, [3.99 ± 0.65] vs [3.58 ± 0.74] vs [3.51 ± 0.99], P = 0.001; IL-6, [13.32 ± 1.57] vs [11.61 ± 1.67] vs [11.42 ± 2.34], P < 0.001). Multivariate logistic regression analysis showed that S100A1 might be an independent predictive factor for the diagnosis of disease (P < 0.001). The AUC of S100A1 for diagnosis of AIS was 0.818 (P < 0.001, 95% CI [0.749-0.887], cut off 181.03, Jmax 0.578, Se 95.0%, Sp 62.7%). The AUC of S100A1 for diagnosis of TIA was 0.720 (P = 0.001, 95% CI [0.592-0.848], cut off 150.14, Jmax 0.442, Se 50.0%, Sp 94.2%). There were statistically significant differences in S100A1, NF-κB p65, and IL-6 among the SCI,MCI, and LCI groups (S100A1, [223.98 ± 40.21] vs [225.42 ± 30.92] vs [254.25 ± 37.07], P = 0.001; NF-κB p65, [3.88 ± 0.66] vs [3.85 ± 0.64] vs [4.41 ± 0.45], P < 0.001; IL-6, [13.27 ± 1.65] vs [12.77 ± 1.31] vs [14.00 ± 1.40], P = 0.007). Plasma S100A1, NF-κB p65, and IL-6 were significantly different from cerebral infarction volume (S100A1, r = 0.259, P = 0.002; NF-κB p65, r = 0.316, P < 0.001; IL-6, r = 0.177, P = 0.036). There was a positive correlation between plasma S100A1 and IL-6 with statistical significance (R = 0.353, P < 0.001). There was no significant positive correlation between plasma S100A1 and NF-κB p65 (R < 0.3), but there was statistical significance (R = 0.290, P < 0.001). There was a positive correlation between IL-6 and NF-κB p65 with statistical significance (R = 0.313, P < 0.001).

Conclusion

S100A1 might have a better diagnostic efficacy for AIS and TIA. S100A1 was associated with infarct volume in AIS, and its level reflected the severity of acute cerebral infarction to a certain extent. There was a correlation between S100A1 and IL-6 and NF-κB p65, and it was reasonable to speculate that this protein might mediate the inflammatory response through the NF-κB pathway during the pathophysiology of AIS.

Bifunctional Alloy/Solid-Electrolyte Interphase Layer for Enhanced Potassium Metal Batteries Via Prepassivation

Potassium (K) metal batteries have attracted great attention owing to their low price, widespread distribution, and comparable energy density. However, the arbitrary dendrite growth and side reactions of K metal are attributed to high environmental sensitivity, which is the Achilles' heel of its commercial development. Interface engineering between the current collector and K metal can tailor the surface properties for K-ion flux accommodation, dendrite growth inhibition, parasitic reaction suppression, etc. We have designed bifunctional layers via prepassivation, which can be recognized as an O/F-rich Sn-K alloy and a preformed solid-electrolyte interphase (SEI) layer. This Sn-K alloy with high substrate-related binding energy and Fermi level demonstrates strong potassiophilicity to homogeneously guide K metal deposition. Simultaneously, the preformed SEI layer can effectually eliminate side reactions initially, which is beneficial for the spatially and temporally KF-rich SEI layer on K metal. K metal deposition and protection can be implemented by the bifunctional layers, delivering great performance with a low nucleation overpotential of 0.066 V, a high average Coulombic efficiency of 99.1%, and durable stability of more than 900 h (1 mA cm-2, 1 mAh cm-2). Furthermore, the high-voltage platform, energy, and power densities of K metal batteries can be realized with a conventional Prussian blue analogue cathode. This work provides a paradigm to passivate fragile interfaces for alkali metal anodes.

DFT characterization of a new possible two-dimensional BN allotrope with a biphenylene network structure

The pioneering work on the newly experimentally synthesized biphenylene network C has triggered a worldwide tide of research on its family material counterparts. In this study, a biphenylene network BN...

Interface Engineering of Aqueous Zinc/Manganese Dioxide Batteries with High Areal Capacity and Energy Density

Commercialization of aqueous batteries is mainly hampered by their low energy density, owing to the low mass loading of active cathode materials. In this work, a MnO₂ cathode structure (MnO₂ /CTF) is designed to modify the MnO₂ /collector interface for enhanced ion transportation properties. Such a cathode can achieve ultrahigh mass loading of MnO₂ , large areal capacity, and high energy density, with excellent cycling stability and rate performance. Specifically, a 0.15 mm thick MnO₂ /CTF cathode can realize a mass loading of 20 mg cm^-2 with almost 100% electrochemical conversion of MnO₂ , providing the maximum areal capacity of 12.08 mA h cm^-2 and energy density of 191 W h kg^-1 for Zn-MnO₂ /CTF batteries when considering both cathode and anode. Besides the conventional low energy demonstrations, such a Zn-MnO₂ /CTF battery is capable of realistic applications, such as mobile phones in our daily life, which is a promising alternative for wearable electronics.

Self-Healing of Prussian Blue Analogues with Electrochemically Driven Morphological Rejuvenation

Maintaining the morphology of electrode materials with high invertibility contributes to the prolonged cyclic stability of battery systems. However, the majority of electrode materials tend to degrade during the charge-discharge process owing to the inevitable increase in entropy. Herein, a self-healing strategy is designed to promote morphology rejuvenation in Prussian blue analogue (PBA) cathodes by cobalt doping. Experimental characterization and theoretical calculations demonstrate that a trace amount of cobalt can decelerate the crystallization process and restore the cracked areas to ensure perfect cubic structures of PBA cathodes. The electric field controls the kinetic dynamics, rather than the conventional thermodynamics, to realize the "electrochemically driven dissolution-recrystallization process" for the periodic self-healing phenomenon. The properties of electron transportation and ion diffusion in bulk PBA are also improved by the doping strategy, thus boosting the cyclability with 4000 cycles in a diluent electrolyte. This discovery provides a new paradigm for the construction of self-healing electrodes for cathodes.

A Novel Splicing Mutation c.335-1 G > A in the Cardiac Transcription Factor NKX2-5 Leads to Familial Atrial Septal Defect Through miR-19 and PYK2

Mutations of NKX2-5 largely contribute to congenital heart diseases (CHDs), especially atrial septal defect (ASD). We identified a novel heterozygous splicing mutation c.335-1G > A in NKX2-5 gene in an ASD family via whole exome sequencing (WES) and linkage analysis. Utilizing the human induced pluripotent stem cell (hiPSC)-derived cardiomyocytes (hiPSC-CMs) as a disease model, we showed that haploinsufficiency of NKX2-5 contributed to aberrant orchestration of apoptosis and proliferation in ASD patient-derived hiPSC-CMs. RNA-seq profiling and dual-luciferase reporter assay revealed that NKX2-5 acts upstream of PYK2 via miR-19a and miR-19b (miR-19a/b) to regulate cardiomyocyte apoptosis. Meanwhile, miR-19a/b are also downstream mediators of NKX2-5 during cardiomyocyte proliferation. The novel splicing mutation c.335-1G > A in NKX2-5 and its potential pathogenic roles in ASD were demonstrated. Our work provides clues not only for deep understanding of NKX2-5 in cardia development, but also for better knowledge in the molecular mechanisms of CHDs.

Controllable and Homogeneous Lithium Electrodeposition via Lithiophilic Anchor Points

Uncontrollable growth of lithium (Li) dendrites and low Coulombic efficiency induce security hazards and a short cycling lifespan of Li metal batteries. In this study, well-aligned ZnO nanorods on a periodic three-dimensional (3D) copper mesh (CM) are modified as lithiophilic anchor points to regulate the electrodeposition behavior of Li metal anodes. The in situ generated LiZn/Li₂O arrays can efficiently guide the homogeneous Li electrodeposition along the nanorods. The porous structure of CM provides void space for the well-controlled lateral growth of Li starting from nanorod arrays. Moreover, the high surface area generated by both CM and the ZnO nanorods favors the charge transfer with low local current densities along the anode. Compared with bare Li anodes, Li-ZnO@CM anodes exhibited prolonged cycling stability for symmetric cells and superior capacity retention within Li/LiFePO₄ full cells, demonstrating the effective design principles of ZnO@CM for stabilizing Li metal batteries.

Selective Chemical Vapor Deposition Growth of WS2/MoS2 Vertical and Lateral Heterostructures on Gold Foils

Vertical and lateral heterostructures consisting of atomically layered two-dimensional (2D) materials exhibit intriguing properties, such as efficient charge/energy transfer, high photoresponsivity, and enhanced photocatalytic activities. However, the controlled fabrication of vertical or lateral heterojunctions on metal substrates remains challenging. Herein, we report a facile and controllable method for selective growth of WS₂/MoS₂ vertical or lateral heterojunctions on polycrystalline gold (Au) foil by tuning the gas flow rate of hydrogen (H₂). We find that lateral growth is favored without H₂, whereas vertical growth mode can be switched on by introducing 8–10 sccm H₂. In addition, the areal coverage of the WS₂/MoS₂ vertical heterostructures is tunable in the range of 12–25%. Transmission electron microscopy (TEM) and selected area electron diffraction (SAED) results demonstrate the quality and absence of cross-contamination of the as-grown heterostructures. Furthermore, we investigate the effects of the H₂ flow rate on the morphology of the heterostructures. These pave the way to develop unprecedented 2D heterostructures towards applications in (opto)electronic devices.

CoNiO2 /Co4 N Heterostructure Nanowires Assisted Polysulfide Reaction Kinetics for Improved Lithium-Sulfur Batteries

The "shuttle effect" of soluble polysulfides and slow reaction kinetics hinder the practical application of Li-S batteries. Transition metal oxides are promising mediators to alleviate these problems, but the poor electrical conductivity limits their further development. Herein, the homogeneous CoNiO2 /Co4 N nanowires have been fabricated and employed as additive of graphene based sulfur cathode. Through optimizing the nitriding degree, the continuous heterostructure interface can be obtained, accompanied by effective adjustment of energy band structure. By combining the strong adsorptive and catalytic properties of CoNiO2 and electrical conductivity of Co4 N, the in situ formed CoNiO2 /Co4 N heterostructure reveals a synergistic enhancement effect. Theoretical calculation and experimental design show that it can not only significantly inhibit "shuttle effect" through chemisorption and catalytic conversion of polysulfides, but also improve the transport rate of ions and electrons. Thus, the graphene composite sulfur cathode supported by these CoNiO2 /Co4 N nanowires exhibits improved sulfur species reaction kinetics. The corresponding cell provides a high rate capacity of 688 mAh g-1 at 4 C with an ultralow decaying rate of ≈0.07% per cycle over 600 cycles. The design of heterostructure nanowires and graphene composite structure provides an advanced strategy for the rapid capture-diffusion-conversion process of polysulfides.

Modulating thermal transport in a porous carbon honeycomb using cutting and deformation techniques

During the past few years, there has been a flurry of investigations on the lattice thermal transport of three-dimensional (3D) graphene, however, few studies have detailed how to adjust this property effectively using the presently available engineering technologies. In this work, the thermal transport properties of a porous single layer carbon honeycomb (SL-dCHC-2) and its mechanical response are systematically studied. We show that the thermal conductivity of SL-dCHC-2 can be adjusted effectively by varying the tensile strain, and its value is enhanced by up to 11.3 times with 8% strain as compared to the unstrained case. This value is significantly larger than what was observed for other two-dimensional (2D) materials such as silicene (∼7 times larger). This outstanding behavior is explained by the phonon mode level, indicating that a profound increase of the thermal conductivity under tensile strain is attributed to the enhancement of the phonon lifetime. In addition, the trend for the root mean squared displacement, which is closely related to the phonon anharmonic effect, correlates with the non-monotonic response of the dimerized C-C bonds at the linkage of the structure. These investigations and obtained results provide important guidance to develop 3D carbon honeycombs for several different purposes, such as for use as molecular sieves and in water purification applications.

Stretched three-dimensional white graphene with a tremendous lattice thermal conductivity increase rate

Despite the increasing interest in the physical properties of the newly synthesized three-dimensional (3D) nano-architectured graphene, there are still few studies on the thermal transport properties of this family of materials. In the present work, heat transport of 3D h-BN and its mechanical response are systematically explored through first principles calculations. It is fascinating to find that the thermal conductivity of the 3D h-BN honeycomb structure could be significantly modulated by mechanical tension. Its lattice thermal conductivity perpendicular to the hole axis increases by 7.2 times at 6% critical strain, compared to only 0.67 times for that of the strained 3D graphene counterpart. The structure's thermal conductivity versus mechanical tension differs quantitatively and qualitatively from the monotonic downward trend of traditional bulk diamond or silicon under tension. This deviation from the classic behavior could be attributed to the modification of the phonon lifetimes, together with the competition between group velocities of low- and high-lying phonons under strain. Finally, the phonon vibrational modes contribution analysis indicates that the BN ribbon atoms contribute mainly at a lower frequency range. Our results provide important insights into potential employment of nano-architectured 3D white graphene for thermal management in relevant industrial applications.

Thermal conductivity of the 3D h-BN honeycomb structure increases by 7.2 times under strain compared to an increase of only 0.67 times in the strained 3D graphene counterpart, differing from behaviors of traditional bulk diamond or silicon.

Hierarchical Stratiform of a Fluorine-Doped NiO Prism as an Enhanced Anode for Lithium-Ion Storage

Doping is regarded as a prominent strategy to optimize the crystal structure and composition of battery materials to withstand the anisotropic expansion induced by the repeated insertion and extraction of guest ions. The well-known knowledge and experience obtained from doping engineering predominate in cathode materials but have not been fully explored for anodes yet. Here, we propose the practical doping of fluorine ions into the host lattice of nickel oxide to unveil the correlation between the crystal structure and electrochemical properties. Multiple ion transmission pathways are created by the orderly two-dimensional nanosheets, and thus the stress/strain can be significantly relieved with trace fluorine doping, ensuring the mechanical integrity of the active particle and superior electrochemical properties. Density functional theory calculations manifest that the F doping in NiO could improve crystal structural stability, modulate the charge distribution, and enhance the conductivity, which promotes the performance of lithium-ion storage.

Monoatomic Platinum-Embedded Hexagonal Close-Packed Nickel Anisotropic Superstructures as Highly Efficient Hydrogen Evolution Catalyst

The rational design of platinum (Pt) based nanostructures with specific crystal structure plays a significant role in their diverse applications. Herein, the anisotropic superstructures (ASs) of monoatomic Pt-embedded hexagonal close-packed nickel (hcp Ni) nanosheets were successfully synthesized for efficient hydrogen evolution in which an unusual dissociation-diffusion-desorption mechanism played a crucial role. The overpotential for the Pt/Ni ASs to reach the specific current density (10 mA cm^-2) is 28.0 mV, which is much lower than that of conventional Pt/C catalyst (71.0 mV). Moreover, at the overpotential of 100 mV, the mass activity of 30.2 A mg_Pt^-1 for the Pt/Ni ASs is 1060% greater than that in conventional Pt/C catalyst (2.6 A mg_Pt^-1). This work provides a new approach to synthesize highly anisotropic superstructures embedded with monoatomic noble metals to boost their hopeful applications in catalytic applications.

The structural and magnetic properties of single-crystal Gd4Ga2O9

The crystalline structures and magnetic and thermodynamic properties of a Gd4Ga2O9 single crystal grown with the optical floating zone technique have been investigated. Gd4Ga2O9 crystallizes in a monoclinic structure with the space group P21/c at room temperature. Temperature-dependent magnetic susceptibility measurements along the three crystallographic axes reveal a paramagnetic (PM) behavior between 2 and 300 K. A Curie–Weiss (CW) law fit was carried out and the CW temperature θCW and magnetic frustration parameter f were calculated; these suggest antiferromagnetic (AFM) interactions between Gd3+ spins and a strong magnetic frustration. The field dependence of the magnetization at 2 K further confirms the magnetic frustration characteristics. A distinct λ-shaped peak at 1.4 K in the heat capacity curves suggests a transition from the PM to AFM phase. The magnetic entropy is contributed solely by Gd3+ ions.

Enhanced Axial Tension-tension Fatigue Resistance of a 51CrV4 Spring Steel by Cryogenic Treatment

51CrV4 spring steel is widely used in heavy duty dump trucks ascribing to its superior mechanical properties. The fatigue life and strength of dump trucks are the main performance indicators that must be considered in the manufacturing process. Cryogenic treatment (CT) can improve the main performance of materials which has been proved by recently research. The effect of cryogenic treatment CT on the axial tensile fatigue strength of 51CrV4 spring steel was studied in this paper. The results showed that the axial tension-tension fatigue life of 51CrV4 spring steel after CT was significantly higher than conventional heat treatment (CHT) samples. The microstructure of 51CrV4 leaf spring material is mainly acicular bainite and thin strip martensite after CT. Compared with CHT, CT makes the microstructure of the material more compact. The introduction of cryogenic treatment (CT) before tempering makes the Ca element in the material aggregate, and the micro amount of Ca has the function of deoxidizing and desulphurizing and improving the morphology of sulfide, thus enhancing the fatigue life of the material.

Phase Tailoring of Ruddlesden-Popper Perovskite at Fixed Large Spacer Cation Ratio

Ruddlesden-Popper (RP) metal halide perovskites are considered as promising optoelectronic materials due to their good environmental stability and desirable optoelectronic properties. However, the phase composition and ordering in the deposited film, with a fixed ratio of large organic spacer cation in the precursor solution, are hard to be further tailored for specific optoelectronic applications. Herein, it is shown that even with a fixed spacer cation ratio, the phase composition and ordering can still be largely regulated by utilizing different crystallization kinetics of various cations with the inorganic octahedral lead halide. By using two different short cations to compete with the large spacer cation, the phase composition can be continuously tailored from thin multiple quantum wells (MQWs) dominated to 3D perovskite dominated. The phase ordering can be reversed from small n phases' prior to large n phases' prior near the substrate. Finally, with the same amount of large spacer cation protection, the perovskite can be tailored for both high-performance electroluminescence and photovoltaics with favorable energetic landscape for the corresponding desired first-order excitonic recombination and second-order free electron-hole recombination, respectively. This exploration substantially contributes to the understanding of precise phase engineering in RP perovskite and may provide a new insight into the design of multiple functional devices.

Nitrogen and Fluorine Dual Doping of Soft Carbon Nanofibers as Advanced Anode for Potassium Ion Batteries

Potassium-ion batteries (PIBs) are recognized as promising alternatives for lithium-ion batteries as the next-generation energy storage systems. However, the larger radius of K⁺ hinders the K⁺ insertion into the conventional carbon electrode and results in sluggish potassiation kinetics and poor cycling stability. Here, nitrogen and fluorine dual doping of soft carbon nanotubes (NFSC) anode are synthesized in one pot, achieving extraordinary electrochemical performance for PIBs. It is demonstrated that NFSC with a doping dose of 5.6 at% nitrogen and 1.3 at% fluorine together exhibits the highest reversible capacity of 238 mAh g^-1 at 0.2 A g^-1 and cycling stability of 186 mAh g^-1 after 1000 cycles at 1 A g^-1 . The extraordinary electrochemical performance can be attributed to the hollow structure, expanded interlayer distance, nitrogen and fluorine dual doping, and the binding ability of abundant defect sites. Moreover, density functional theory shows that the extra fluorine modification can dramatically enhance the conventional nitrogen doping effect and reduces the formation energy which makes a great contribution to the improvement of electrical conduction and K-ions insert. This work may promote the development of low-cost and sustainable carbon-based materials for PIBs and other advanced energy storage devices.

Bayberry tannin directed assembly of a bifunctional graphene aerogel for simultaneous solar steam generation and marine uranium extraction

Solar steam generation and marine uranium extraction are promising methods for obtaining sufficient fresh water and nuclear fuel from the ocean, respectively, for overcoming water and energy crises. In this work, a bayberry tannin (BT) directed assembly of a bifunctional graphene aerogel (GA) has been designed for simultaneous solar steam generation (1.80 kg m-2 h-1 with a high solar efficiency of 95.5%) and marine uranium extraction (230.10 mg g-1 within 6 h). BT molecules are uniformly decorated inside the typical porous channels of GA, which integrates the excellent uranium binding of BT and the efficient light-to-heat conversion of GA. It is found that the hydrophilic nature of BT can improve fluid infiltration in the GA matrix for solar steam generation while the steam generation induced transpiration can accelerate the adsorption of uranium ions for marine uranium extraction. The unique bifunctional ability of the BT-GA composite paves a new way to utilize the abundant resources in the ocean.

Fe-modified Co2(OH)3Cl microspheres for highly efficient oxygen evolution reaction

Surface self-reconstruction by the electrochemical activation is considered as an effective strategy to increase the oxygen evolution reaction (OER) performance of transition metal compounds. Herein, uniform Co₂(OH)₃Cl microspheres are developed and present an activation-enhanced OER performance caused by the etching of lattice Cl^- after 500 cyclic voltammetry (CV) cycles. Furthermore, the OER activity of Co₂(OH)₃Cl can be further enhanced after small amounts of Fe modification (Fe²⁺ as precursor). Fe doping into Co₂(OH)₃Cl lattices can make the etching of surface lattice Cl^- easier and generate more surface vacancies to absorb oxygen species. Meanwhile, small amounts of Fe modification can result in a moderate surface oxygen adsorption affinity, facilitating the activation of intermediate oxygen species. Consequently, the 10% Fe-Co₂(OH)₃Cl exhibits a superior OER activity with a lower overpotential of 273 mV at 10 mA cm^-2 (after 500 CV cycles) along with an excellent stability as compared with commercial RuO₂.

Electrodeposition of Ni3Se2/MoSex as a bifunctional electrocatalyst towards highly-efficient overall water splitting

Electrochemically splitting water into hydrogen and oxygen plays a significant role in the commercialization of hydrogen energy as well as fuel cells, but it remains a challenge to design and fabricate low-cost and high-efficiency electrocatalysts. Herein, we successfully prepared Ni3Se2/MoSex on nickel foam via a facile electrodeposition method. To understand the electrochemical mechanism occurring in the electrodeposition process, a new model was proposed, providing insight into the nucleation and growth of deposited materials. The as-prepared Ni3Se2/MoSex exhibits splendid electrochemical performance with 82 mV and 270 mV overpotentials to drive a current density of 10 mA cm-2 in 1 M KOH aqueous solution for HER and OER, respectively. Moreover, a driving potential of 1.57 V is required to reach a current density of 10 mA cm-2 for a configured full cell with Ni3Se2/MoSex working as both the anode and cathode towards overall water splitting, outperforming the state-of-the-art commercial full cells assembled with noble-based metals. The advanced catalytic performance should be attributed to the numerous in situ formed interfaces, allowing π-electron transfer from Ni to Mo via O2- bridging, subsequently optimizing the adsorption features of oxygenated species (OER) and favorable Volmer/Heyrovsky reaction (HER). This work offers an effective and scalable fabrication prototype for the preparation of bifunctional electrocatalysts with electrodeposition.

Promoting photocatalytic hydrogen evolution over the perovskite oxide Pr0.5(Ba0.5Sr0.5)0.5Co0.8Fe0.2O3 by plasmon-induced hot electron injection

Exploration of highly efficient and stable photocatalysts for water splitting has attracted much attention. However, developing a facile and effective approach to enhance the photocatalytic activity for practical applications is still highly challenging. Herein, we report a newly-fabricated perovskite oxide (Pr_0.5(Ba_0.5Sr_0.5)_0.5Co_0.8Fe_0.2O₃) decorated with Au ultrafine nanoparticles for photocatalytic water splitting. An exceptionally high hydrogen evolution rate of 1618 μmol g^-1 h^-1 was achieved (under 2 h illumination) when the Au mass loading was optimized to 9.3 wt%, which is 540 times higher than that of the pristine one. The splendid photocatalytic activity of the sample was attributed to plasmon-excited hot electron injection from Au to Pr_0.5(Ba_0.5Sr_0.5)_0.5Co_0.8Fe_0.2O₃ (PBSCF) under illumination. The finite-difference time-domain simulations (FDTD) demonstrated that the localized strong electric field formed at the interface between Au and PBSCF under illumination, enables the hot electrons to be energetic and make the injection possible.

Phase-controllable growth of ultrathin 2D magnetic FeTe crystals

Two-dimensional (2D) magnets with intrinsic ferromagnetic/antiferromagnetic (FM/AFM) ordering are highly desirable for future spintronic devices. However, the direct growth of their crystals is in its infancy. Here we report a chemical vapor deposition approach to controllably grow layered tetragonal and non-layered hexagonal FeTe nanoplates with their thicknesses down to 3.6 and 2.8 nm, respectively. Moreover, transport measurements reveal these obtained FeTe nanoflakes show a thickness-dependent magnetic transition. Antiferromagnetic tetragonal FeTe with the Néel temperature (TN) gradually decreases from 70 to 45 K as the thickness declines from 32 to 5 nm. And ferromagnetic hexagonal FeTe is accompanied by a drop of the Curie temperature (TC) from 220 K (30 nm) to 170 K (4 nm). Theoretical calculations indicate that the ferromagnetic order in hexagonal FeTe is originated from its concomitant lattice distortion and Stoner instability. This study highlights its potential applications in future spintronic devices.

Ultrashort laser pulse doubling by metal-halide perovskite multiple quantum wells

Multiple ultrashort laser pulses are widely used in optical spectroscopy, optoelectronic manipulation, optical imaging and optical signal processing etc. The laser pulse multiplication, so far, is solely realized by using the optical setups or devices to modify the output laser pulse from the optical gain medium. The employment of these external techniques is because the gain medium itself is incapable of modifying or multiplying the generated laser pulse. Herein, with single femtosecond laser pulse excitation, we achieve the double-pulsed stimulated emission with pulse duration of around 40 ps and pulse interval of around 70 ps from metal-halide perovskite multiple quantum wells. These unique stimulated emissions originate from one fast vertical and the other slow lateral high-efficiency carrier funneling from low-dimensional to high-dimensional quantum wells. Furthermore, such gain medium surprisingly possesses nearly Auger-free stimulated emission. These insights enable us a fresh approach to multiple the ultrashort laser pulse by gain medium.

Laser pulse multiplication is desired in many applications but has been challenging to realize by gain medium. Here Guo et al. achieve double-pulsed stimulated emission in quasi-2D metal-halide perovskites due to the two-channel carrier funneling effect in their multiple-quantum-wells structure.

High-Performance and Ultraflexible Aqueous Rechargeable Lithium-Ion Batteries Developed by Constructing All Binder-free Electrode Materials

Aqueous rechargeable lithium-ion batteries (ARLIBs) as alternative energy storage devices have attracted tremendous attention because of their low cost and high safety. However, it is still a significant challenge to develop flexible high-performance ARLIBs for powering wearable devices because of the lack of all binder-free electrode materials. In this study, we develop one-step hydro-/solvothermal methods to design binder-free electrodes of LiCoO₂ polygonal-sheeted arrays and rugby ball-shaped NaTi₂(PO₄)₃ on carbon nanotube fibers as the cathode (LCO@CNTF) and the anode (NTP@CNTF). Both the electrodes are prepared at low temperatures without an extra calcination process, which is a great improvement for the growth process. The electrodes deliver remarkable capacity and extraordinary rate performance in a saturated Li₂SO₄ solution. Meanwhile, because of the synergy of LCO@CNTF and NTP@CNTF, an impressive capacity of 45.24 mA h cm^-3 and an admirable energy density of 67.86 mW h cm^-3 are achieved for the assembled quasi-solid-state fiber-shaped flexible ARLIB (FARLIB), which outperform most reported fiber-shaped aqueous rechargeable batteries. More encouragingly, our FARLIB possesses good flexibility, with a 94.74% capacity retention after bending 3000 times. Thus, this work represents a significant step toward developing FARLIBs and provides a new prospect in the design of wearable energy storage devices.

Salidroside Reduces Inflammation and Brain Injury After Permanent Middle Cerebral Artery Occlusion in Rats by Regulating PI3K/PKB/Nrf2/NFκB Signaling Rather than Complement C3 Activity

Salidroside, an active constituent of Rhodiola rosea, is neuroprotective after transient middle cerebral artery occlusion (tMCAO). However, its effects in other experimental stroke models are less understood. Here, we investigated the effect of daily intraperitoneal injections of salidroside in rats after permanent MCAO (pMCAO). Cerebral infarct volumes at 1 day after pMCAO were significantly reduced by treatment with 100 mg/kg/day salidroside, but not by 25 or 50 mg/kg/day, and this benefit of salidroside increased significantly over at least 7 days of treatment, when it was also accompanied by decreased neurological deficit scores. These observations led us to investigate the underlying mechanism of action of salidroside. 100 mg/kg salidroside for 1 day increased NeuN, Nrf2, and its downstream mediator HO-1, while it reduced nuclear NFκB p50, IL-6, and TNFα. Brusatol, a Nrf2 inhibitor, blocked the actions of salidroside on Nrf2, NFκB p50, IL-6, and TNFα. Salidroside also increased the ratio of p-PKB/PKB at 1 day after pMCAO even in the presence of brusatol. LY294002, a PI3K inhibitor, prevented all these effects of salidroside, including those on NeuN, p-PKB/PKB, Nrf2, HO-1, and pro-inflammatory mediators. In contrast, salidroside had no significant effect on the level of cerebral complement C3 after pMCAO, or on the activity of C3 as measured by the expression of cerebral Egr1. Our findings therefore suggest that salidroside reduces neuroinflammation and neural damage by regulating the PI3K/PKB/Nrf2/NFκB signaling pathway after pMCAO, and that this neuroprotective effect does not involve modulation of complement C3 activity.

Primary desmoplastic small round cell tumor of the tibia: PET/CT and MRI presentation of a rare case and review of the literature

Desmoplastic small round cell tumor (DSRCT) was a soft tissue sarcoma of mesenchymal cell origin that typically exhibited a multi-phenotypic pattern of immunohistochemical staining. DSRCT mainly presented in the abdomen sites and primary occurrence in bone was exceptional. In this study, we reported a new case of primary DSRCT of the tibia in a 33-year-old man who had intermittent pain in the left tibia. Radiographs showed transparent lesions in the left upper tibial. MRI revealed a lobular, lytic and ill-identified lesion with adjacent soft tissues swelling of the upper left tibia. CT confirmed notable destruction and wormlike osteolysis of the bone cortex. PET/CT showed a mass of high uptakes, indicating the malignance. He accepted surgical resection with followed multi-agent chemotherapy, containing vincristine, doxorubicin, ifosfamide and etoposide. Clinically and radiologically, the patient did not show any evidence of recurrence or metastasis at 30 months after surgical treatment. Primary osteogenic DSRCT was extremely rare and should be considered in differential diagnosis of bone tumors.

Engineering the coupling interface of rhombic dodecahedral NiCoP/C@FeOOH nanocages toward enhanced water oxidation

Hydrogen, regarded as one of the most promising green and sustainable energy resources, could be generated by splitting water with electrochemical methods. The challenge for efficient hydrogen generation is the sluggish kinetics at the anodes for the oxygen evolution reaction (OER). Here, a novel catalyst with remarkably enhanced OER activity was prepared by coupling FeOOH and NiCoP/C. The enhanced OER activity of the hybrid catalyst should be ascribed to the synergistic effect of the individual components. First, NiCoP/C derived from ZIF-67 with a hollow rhombic dodecahedral architecture not only allows exposure of numerous active sites but also provides high conductivity. Second, the re-localization of electrons at the coupling interface optimizes the adsorption/desorption nature of intermediate oxygenated species and imparts a high OER activity. The hybrid NiCoP/C@FeOOH catalyst exhibits very high OER activity with a low overpotential of 271 mV for producing a current density of 10 mA cm^-2 in 1 M KOH aqueous solution, markedly surpassing the individual counterparts of pure NiCoP/C nanocages and bare FeOOH. This work represents a universal strategy for boosting the OER kinetics of catalysts and pushing boundaries for high-efficiency water oxidation.

Review of Polygonatum sibiricum: A new natural cosmetic ingredient

With the developments of science and technology, social development and people's pursuit of quality life, natural and safe skin care products occupied half of the cosmetics industry. In recent years, as synthetic drugs were found that which had toxic and some side effects, people have a tendency to return to nature. Thus, traditional Chinese medicinal plants were applied to natural cosmetics with good efficacy, little side effects and no allergy which had more advantages than synthetic products. The cosmetic products with pure natural ingredients were more and more favored by consumers. Therefore, the article mainly pays attention to the relationship between the active ingredients of Polygonatum sibiricum (PS) and their cosmetic effects, mainly included anti-aging activity, anti-bacteria effect, skin whitening and moisturizing effects. The article will provide more possibilities for research of natural ingredients cosmetics.

High-Efficiency Cryo-Thermocells Assembled with Anisotropic Holey Graphene Aerogel Electrodes and a Eutectic Redox Electrolyte

Thermocells, capable of converting temperature-dependent electrochemical redox potentials into electrical power, can harvest waste or low-grade heat in an economical and continuous approach with zero carbon emission. However, the power density and conversion efficiency of thermocells are hindered by a narrow operation window and low ion conductivity of the electrodes, especially in freezing weather conditions. Herein, highly efficient cylindrical thermocells, working in a wide operation window of cold temperatures, are developed. A eutectic electrolyte consisting of formamide and water is formulated with a high ion conductivity, which is retained at a significantly extended lower limit of the operation window from conventional 0 to -40 °C. In parallel, an electrode material based on anisotropic holey graphene aerogel is synthesized with improved ion conductivity, especially at temperatures below 0 °C, due to its aligned graphene sheets and pores. By taking the advantages of both components, the power density and the Seebeck coefficient of a single-cylinder thermocell reaches an exceptionally high value, i.e., 3.6 W m^-2 and 1.3 mV K^-1 , respectively. Moreover, assembled thermocells in series packaging substantially enhance the voltage of the open-circuit, i.e., from 140 mV (1-cylinder thermocell) to 2.1 V (15-cylinder thermocells).

Subjective Evaluation of Denture Adhesives: A Multicenter Randomized Controlled Trial

INTRODUCTION

Many reports show that denture adhesives improve the retention and stability of dentures. However, few randomized controlled trials have examined the effects of denture adhesives.

OBJECTIVE

This 10-center randomized controlled trial with parallel groups involving 200 edentulous patients wearing complete dentures aimed to evaluate the effects of short-term use of cream and powder denture adhesives.

METHODS

Patients were allocated into 2 cream- and powder-type adhesive groups and 1 control group. Intervention groups were treated with the 2 adhesives (1 each), and the control group received saline solution. Adhesive or control was applied to the denture-mucosal surface for 4 d, and data at baseline and after day 4 of intervention (i.e., 8 meals) were obtained. Patient satisfaction was evaluated with a 100-mm visual analog scale. Oral health-related quality of life was measured with the Japanese version of the Oral Health Impact Profile for Edentulous Patients. Perceived chewing ability was evaluated by a questionnaire regarding ease of chewing and swallowing food. Between-group comparisons were performed with Kruskal-Wallis tests with the Mann-Whitney U test adjusted by Bonferroni correction. Within-group comparisons of pre- and postintervention measurements were performed with the Wilcoxon signed-rank test. Intention-to-treat analysis was also performed.

RESULTS

Between-group comparisons showed no significant differences for general satisfaction or Oral Health Impact Profile for Edentulous Patients. However, significant differences in satisfaction with various denture functions with cream- and powder-type adhesives were seen in pre- and postintervention comparisons (P < 0.05). Significant differences were also observed for perceived chewing ability of hard foods (P < 0.05).

CONCLUSION

These results suggest that although denture adhesives do not invariably improve denture function, they do affect subjective evaluations and possibly chewing of hard foods. Therefore, the effects of denture adhesive use are insufficient to resolve any fundamental dissatisfaction with dentures ( ClinicalTrials.gov NCT01712802 ).

KNOWLEDGE TRANSFER STATEMENT

The results of this study suggest that denture adhesives should be applied under certain conditions; however, an appropriate diagnosis is important before application. These practice-based data provide information to establish evidence-based guidelines for applying denture adhesives.