Epoxy-rich Fe Single Atom Sites Boost Oxygen Reduction Electrocatalysis

Core-Shell Quantum Wires-Supported Single-Atom Fe Electrocatalysts for Efficient Overall Water Splitting

It is of great significance for the development of hydrogen energy technology by exploring the new-type and high-efficiency electrocatalysts (such as single atom catalysts (SACs)) for water splitting. In this paper, by combining interface engineering and doping engineering, a unique single atom iron (Fe)-doped carbon-coated nickel sulfide (Ni3S2) quantum wires (Ni3S2@Fe-SACs) is prepared as a high-performance bi-functional electrocatalyst for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Theoretical calculation and experimental results show that the addition of atomic Fe species can effectively adjust the electronic structure of sulfide, the interfacial electron transfer modulates the d-band center position, optimizing the transient state of the catalytic process and adsorption energy of hydrogen/oxygen intermediates, and greatly accelerates the kinetics of HER and OER. The results show that the Ni3S2@Fe-SACs core-shell quantum wires array exhibit overpotentials of 46 and 219 mV for HER and OER at 10 mA cm-2 in 1 m KOH, respectively. In addition, the two-electrode electrolyzer assembled by the Ni3S2@Fe-SACs requires a voltage as low as 1.465 V to achieve alkaline overall water splitting of 10 mA cm-2. This work holds great promise for the development of highly active and highly stable electrocatalysts for future hydrogen energy conversion applications.

Insights into the electrochemical catalytic mechanism of atomically dispersed metal on h-BCN monolayer

Exploiting efficient and inexpensive electrocatalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is of great significance for the rapid development of renewable energy technologies. The embedding of single-atom metals into two-dimensional (2D) carbon-based materials as electrocatalysts for fuel cells and metal-air batteries have become a major research focus. Herein, the catalytic properties of the ORR and OER of partial metal atoms embedded in a two-dimensional h-BCN monolayer were systematically investigated on thermodynamic and kinetic scales using density functional theory calculations. Electronic structure studies confirm that the d orbitals of metal atoms hybridize with the 2p orbitals of the O atom, modulating the adsorption free energies of oxygen-containing intermediates (OOH, O and OH). Comparison and analysis of catalytic activity results reveal that Co single-atom catalysts (Co-SACs@h-BCN) possess the lowest ORR and OER overpotentials and therefore are expected to be a kind of excellent bifunctional electrocatalyst. This study not only demonstrates that boron- and nitrogen-doped carbon-based materials embedded with partial metal atoms are superior 2D electrocatalysts, but also provides guidance for the investigation of efficient non-precious metal-based bifunctional electrocatalysts.

Engineering the Local Atomic Environments of Te-Modulated Fe Single-Atom Catalysts for High-Efficiency O2 Reduction

Atomically dispersed metal-nitrogen-carbon materials (AD-MNCs) are considered the most promising non-precious catalysts for the oxygen reduction reaction (ORR), but it remains a major challenge for simultaneously achieving high intrinsic activity, fast mass transport, and effective utilization of the active sites within a single catalyst. Here, an AD-MNCs consisting of defect-rich Fe-N3 sites dispersed with axially coordinated Te atoms on porous carbon frameworks (Fe1Te1-900) is designed. The local charge densities and energy band structures of the neighboring Fe and Te atoms in FeN3-Te are rearranged to facilitate the catalytic conversion of the O-intermediates. Meanwhile, the negative shift of the d-band center in FeN3-Te reduces the energy barrier limit for effective desorption of the final OH* intermediate. In the electrochemical evaluation, Fe1Te1-900 presents a more positive onset potential and half-wave potentials of 1.03 and 0.89 V versus the reversible hydrogen electrode, respectively. Furthermore, the liquid zinc-air batteries assembled with Fe1Te1-900 exhibited excellent performances compared to commercial Pt/C. This work opens up new ideas for the development of high-performance ORR electrocatalysts for applications in various energy conversion and storage technologies.

Microenvironment Engineering of Heterogeneous Catalysts for Liquid-Phase Environmental Catalysis

Environmental catalysis has emerged as a scientific frontier in mitigating water pollution and advancing circular chemistry and reaction microenvironment significantly influences the catalytic performance and efficiency. This review delves into microenvironment engineering within liquid-phase environmental catalysis, categorizing microenvironments into four scales: atom/molecule-level modulation, nano/microscale-confined structures, interface and surface regulation, and external field effects. Each category is analyzed for its unique characteristics and merits, emphasizing its potential to significantly enhance catalytic efficiency and selectivity. Following this overview, we introduced recent advancements in advanced material and system design to promote liquid-phase environmental catalysis (e.g., water purification, transformation to value-added products, and green synthesis), leveraging state-of-the-art microenvironment engineering technologies. These discussions showcase microenvironment engineering was applied in different reactions to fine-tune catalytic regimes and improve the efficiency from both thermodynamics and kinetics perspectives. Lastly, we discussed the challenges and future directions in microenvironment engineering. This review underscores the potential of microenvironment engineering in intelligent materials and system design to drive the development of more effective and sustainable catalytic solutions to environmental decontamination.

Efficient and durable oxygen reduction in alkaline media by doping heteroatomic boron into FeSA-NC catalyst

Despite extensive research has been conducted on atomic dispersion catalysts for various reactions, altering the electronic structure of the central metal to enhance electrochemical reactivity remains a challenging task. Herein, the electrochemical reactivity was considerably enhanced by introducing heteroatomic B to adjust the d-band of single Fe center. In specific, the obtained FeSA-BNC catalyst demonstrated an outstanding ORR performance (E1/2 = 0.87 V) and exhibited greater long-term durability in alkaline media compared to Pt/C. The performance of FeSA-BNC in Zn-air battery was also higher than that of Pt/C. According to theoretical calculations, a downward shift in the d-band center of Fe was induced by introducing B, thereby improving the desorption of intermediates and facilitating the oxygen reduction reaction (ORR).

Inhibiting Demetalation of Fe─N─C via Mn Sites for Efficient Oxygen Reduction Reaction in Zinc-Air Batteries

Demetalation caused by the electrochemical dissolution of metallic Fe atoms is a major challenge for the practical application of Fe─N─C catalysts. Herein, an efficient single metallic Mn active site is constructed to improve the strength of the Fe─N bond, inhibiting the demetalation effect of Fe─N─C. Mn acts as an electron donor inducing more delocalized electrons to reduce the oxidation state of Fe by increasing the electron density, thereby enhancing the Fe─N bond and inhibiting the electrochemical dissolution of Fe. The oxygen reduction reaction pathway for the dissociation of Fe─Mn dual sites can overcome the high energy barriers to direct O─O bond dissociation and modulate the electronic states of Fe─N4 sites. The resulting FeMn─N─C exhibits excellent ORR activity with a high half-wave potential of 0.92 V in alkaline electrolytes. FeMn─N─C as a cathode catalyst for Zn-air batteries has a cycle stability of 700 h at 25 °C and a long cycle stability of more than 210 h under extremely cold conditions at -40 °C. These findings contribute to the development of efficient and stable metal-nitrogen-carbon catalysts for various energy devices.

Optimization of Carbon-Defect Engineering to Boost Catalytic Ozonation Efficiency of Single Fe─N4 Coordination Motif

Carbon-defect engineering in single-atom metal-nitrogen-carbon (M─N─C) catalysts by straightforward and robust strategy, enhancing their catalytic activity for volatile organic compounds, and uncovering the carbon vacancy-catalytic activity relationship are meaningful but challenging. In this study, an iron-nitrogen-carbon (Fe─N─C) catalyst is intentionally designed through a carbon-thermal-diffusion strategy, exposing extensively the carbon-defective Fe─N4 sites within a micro-mesoporous carbon matrix. The optimization of Fe─N4 sites results in exceptional catalytic ozonation efficiency, surpassing that of intact Fe─N4 sites and commercial MnO2 by 10 and 312 times, respectively. Theoretical calculations and experimental data demonstrated that carbon-defect engineering induces selective cleavage of C─N bond neighboring the Fe─N4 motif. This induces an increase in non-uniform charges and Fermi density, leading to elevated energy levels at the center of Fe d-band. Compared to the intact atomic configuration, carbon-defective Fe─N4 site is more activated to strengthen the interaction with O3 and weaken the O─O bond, thereby reducing the barriers for highly active surface atomic oxygen (*O/*OO), ultimately achieving efficient oxidation of CH3SH and its intermediates. This research not only offers a viable approach to enhance the catalytic ozonation activity of M─N─C but also advances the fundamental comprehension of how periphery carbon environment influences the characteristics and efficacy of M─N4 sites.

Immobilizing Ordered Oxophilic Indium Sites on Platinum Enabling Efficient Hydrogen Oxidation in Alkaline Electrolyte

Addressing the sluggish kinetics in the alkaline hydrogen oxidation reaction (HOR) is a pivotal yet challenging step toward the commercialization of anion-exchange membrane fuel cells (AEMFCs). Here, we have successfully immobilized indium (In) atoms in an orderly fashion into platinum (Pt) nanoparticles supported by reduced graphene oxide (denoted as O-Pt3In/rGO), significantly enhancing alkaline HOR kinetics. We have revealed that the ordered atomic matrix enables uniform and optimized hydrogen binding energy (HBE), hydroxyl binding energy (OHBE), and carbon monoxide binding energy (COBE) across the catalyst. With a mass activity of 2.3066 A mg-1 at an overpotential of 50 mV, over 10 times greater than that of Pt/C, the catalyst also demonstrates admirable CO resistance and stability. Importantly, the AEMFC implementing this catalyst as the anode catalyst has achieved an impressive power output compared to Pt/C. This work not only highlights the significance of constructing ordered oxophilic sites for alkaline HOR but also sheds light on the design of well-structured catalysts for energy conversion.

Tailoring Oxygen Reduction Reaction Kinetics of Fe-N-C Catalyst via Spin Manipulation for Efficient Zinc-Air Batteries

The interaction between oxygen species and metal sites of various orbitals exhibits intimate correlation with the oxygen reduction reaction (ORR) kinetics. Herein, a new approach for boosting the inherent ORR activity of atomically dispersed Fe-N-C matrix is represented by implanting Fe atomic clusters nearby. The as-prepared catalyst delivers excellent ORR activity with half-wave potentials of 0.78 and 0.90 V in acidic and alkaline solutions, respectively. The decent ORR activity can also be validated from the high-performance rechargeable Zn-air battery. The experiments and density functional theory calculations reveal that the electron spin-state of monodispersed Fe active sites is transferred from the low spin (LS, t2g 6 eg 0) to the medium spin (MS, t2g 5 eg 1) due to the involvement of Fe atomic clusters, leading to the spin electron filling in σ∗ orbit, by which it favors OH- desorption and in turn boosts the reaction kinetics of the rate-determining step. This work paves a solid way for rational design of high-performance Fe-based single atom catalysts through spin manipulation.

Ordered mesoporous carbon with binary CoFe atomic species for highly efficient oxygen reduction electrocatalysis

The exploration of powerful, efficient and precious metal-free electrocatalysts for facilitating the sluggish kinetics of the oxygen reduction reaction (ORR) is a crucial endeavor in the development and application of energy conversion and storage devices. Herein, we have rationally designed and synthesized bimetallic CoFe species consisting of CoFe nanoparticles and atomically dispersed dual atoms anchored on an ordered mesoporous carbon matrix (CoFe/NC) as highly efficient ORR electrocatalysts. The pyrolyzation temperature for CoFe/NC plays a vital role in regulating the morphology and composition of both the carbon matrix and CoFe species. The optimized CoFe/NC-750 exhibits a favorable ORR performance in 0.1 M KOH with a high half-wave potential (E1/2) of 0.87 V vs. RHE, excellent tolerance to methanol and remarkable durability (no obvious decrease in E1/2 value after 3000 cycles), all of which are superior to the performance of commercial Pt/C. Experimental measurements and density functional theory (DFT) calculations reveal that the improved ORR performance of CoFe/NC-750 is mainly attributed to the electronic structure of atomically dispersed Fe active sites modulated by the surrounding CoFe alloys and Co single atoms, which accelerates the dissociation and reduction of intermediate OH* species and promotes the ORR process.

Ferredoxin-Inspired Design of S-Synergized Fe-Fe Dual-Metal Center Catalysts for Enhanced Electrocatalytic Oxygen Reduction Reaction

Dual-metal center catalysts (DMCs) have shown the ability to enhance the oxygen reduction reaction (ORR) owing to their distinctive structural configurations. However, the precise modulation of electronic structure and the in-depth understanding of synergistic mechanisms between dual metal sites of DMCs at the atomic level remain challenging. Herein, mimicking the ferredoxin, Fe-based DMCs (Fe2N6-S) are strategically designed and fabricated, in which additional Fe and S sites are synchronously installed near the Fe sites and serve as "dual modulators" for coarse- and fine-tuning of the electronic modulation, respectively. The as-prepared Fe2N6-S catalyst exhibits enhanced ORR activity and outstanding Zinc-air (Zn-air) battery performance compared to the conventional single Fe site catalysts. The theoretical and experimental results reveal that introducing the second metal Fe creates a dual adsorption site that alters the O2 adsorption configuration and effectively activates the O─O bond, while the synergistic effect of dual Fe sites results in the downward shift of the d-band center, facilitating the release of OH*. Additionally, local electronic engineering of heteroatom S for Fe sites further facilitates the formation of the rate-determining step OOH*, thus accelerating the reaction kinetics.

Axially Modified Square-Pyramidal CoN4-F1 Sites Enabling High-Performance Zn-Air Batteries

Cobalt-nitrogen-carbon (Co-N-C) catalysts with a CoN4 structure exhibit great potential for oxygen reduction reaction (ORR), but the imperfect adsorption energy toward oxygen species greatly limits their reduction efficiency and practical application potential. Here, F-coordinated Co-N-C catalysts with square-pyramidal CoN4-F1 configuration are successfully synthesized using F atoms to regulate the axial coordination of Co centers via hydrothermal and chemical vapor deposition methods. During the synthesis process, the geometry structure of the Co atom converts from six-coordinated Co-F6 to square-pyramidal CoN4-F1 in the coordinatively unsaturated state, which provides an open binding site for the O2. The introduction of axial F atoms into the CoN4 plane alters the local atomic environment around Co, significantly improving the ORR activity and Zn-air batteries performance. In situ spectroscopy proves that CoN4-F1 sites strongly combine with the OOH* intermediate and facilitate the splitting of O-O bond, making OOH* readily decompose into O* and OH* via a dissociative pathway. Theoretical calculations confirm that the axial F atom effectively reduces the electronic density of the Co centers and facilitates the desorption of the OH* intermediate, efficiently accelerating the overall ORR kinetics. This work advances a feasible synthesis mechanism of axial ligands and provides a route to construct efficient high-coordination catalysts.

Boron in the Second Coordination Sphere of Fe Single Atom Boosts the Oxygen Reduction Reaction

Metal single atoms coordinated with four nitrogen atoms (M1N4) are regarded as tremendously promising catalysts for the electrocatalytic oxygen reduction reaction (ORR). Nevertheless, the strong bond intensity between the metal center and the O atom in oxygen-containing intermediates significantly limits the ORR activity of M1N4. Herein, the catalytically active B atom is successfully introduced into the second coordination sphere of the Fe single atom (Fe1N4-B-C) to realize the alternative binding of B and O atoms and thus facilitate the ORR activity. Compared with the pristine Fe1N4 catalyst, the synthesized Fe1N4-B-C catalyst exhibits improved ORR catalytic capability with a half-wave potential (E1/2) of 0.80 V and a kinetic current density (JK) of 5.32 mA cm-2 in acid electrolyte. Moreover, in an alkaline electrolyte, the Fe1N4-B-C catalyst displays remarkable ORR activity with E1/2 of 0.87 V and JK of 8.94 mA cm-2 at 0.85 V, outperforming commercial Pt/C. Notably, the mechanistic study has revealed that the active center is the B atom in the second coordination shell of the Fe1N4-B-C catalyst, which avoids the direct bonding of Fe-O. The B center has a moderate binding force to the ORR intermediate, which flattens the ORR energy diagram and thereby improves the ORR performance. Therefore, this study offers a novel strategy for tailoring catalytic performance by tuning the active center of single-atom catalyst.

Interfacial oxygen atom modification of a PdSn alloy to boost oxygen reduction in zinc-air batteries

Modifying the surface of a catalyst with heteroatoms can regulate the interfacial atomic valence state and adjust the charge distribution, which is promising for obtaining desirable platinum carbon catalyst (Pt/C)-matched oxygen reduction reaction (ORR) catalytic performance. Here, we developed an efficient method to access O-rich crystalline interfacial-exposed palladium-tin alloy (111) crystal surfaces [Pd3Sn (111)] for highly efficient ORR via direct reduction of Pd/Sn metal salt species that are well dispersed in a nitrogen, phosphorus-doped carbonaceous (NPC) substrate. In addition to the other materials, preembedded Pd/Sn metal salt species in NPC control the release of metal sources upon reduction in the liquid phase, resulting in the grafting of an as-prepared PdSn alloy with many merits, such as efficient electron conduction, short-range crystallinity and increased crystal interface exposure. The presence of a considerable quantity of oxygen atoms at the interface of small-sized PdSn alloys on NPC substrates has been methodically verified by powder X-ray diffraction, high-resolution transmission electron microscopy and X-ray photoelectron spectroscopy characterizations. The PdSn-O sample exhibited excellent ORR activity, achieving an onset potential of ∼0.99 V and a half-wave potential of ∼0.88 V at 1600 rpm in O2-saturated 1.0 M KOH. Density functional theory simulations of pure Pd, Pd-O, the PdSn alloy and PdSn-O suggest that interfacial oxygen atom modification is responsible for the significantly improved ORR activity. The assembled zinc-air battery provides a high specific power of 218.9 mW cm-2 and a specific capacity of 810.6 mAh gZn-1. Our approach has the potential to stimulate the preparation of O-rich crystalline interfacial-exposed alloy compounds for other energy conversion applications.

Confined Synthesis of Dual-Atoms Within Pores of Covalent Organic Frameworks for Oxygen Reduction Reaction

Dual-atom catalysts exhibit higher reactivity and selectivity than the single-atom catalysts. The pyrolysis of bimetal salt precursors is the most typical method for synthesizing dual-atomic catalysts; however, the finiteness of bimetal salts limits the variety of dual-atomic catalysts. In this study, a confined synthesis strategy for synthesizing dual-atomic catalysts is developed. Owing to the in situ synthesis of zeolitic imidazolate frameworks in the pores of covalent organic frameworks (COFs), the migration and aggregation of metal atoms are suppressed adequately during the pyrolysis process. The resultant catalyst contains abundant Zn─Co dual atomic sites with 2.8 wt.% Zn and 0.5 wt.% Co. The catalyst exhibits high reactivity toward oxygen reduction reaction with a half-wave potential of 0.86 V, which is superior to that of the commercial Pt/C catalyst. Theoretical calculations reveal that the Zn atoms in the Zn─Co dual atomic sites promote the formation of intermediate OOH*, and thus contribute to high catalytic performance. This study provides new insights into the design of dual-atom catalysts using COFs.

Deciphering Structure-Activity Relationship Towards CO2 Electroreduction over SnO2 by A Standard Research Paradigm

Authentic surface structures under reaction conditions determine the activity and selectivity of electrocatalysts, therefore, the knowledge of the structure-activity relationship can facilitate the design of efficient catalyst structures for specific reactivity requirements. However, understanding the relationship between a more realistic active surface and its performance is challenging due to the complicated interface microenvironment in electrocatalysis. Herein, we proposed a standard research paradigm to effectively decipher the structure-activity relationship in electrocatalysis, which is exemplified in the CO2 electroreduction over SnO2 . The proposed practice has aided in discovering authentic/resting surface states (Sn layer) of SnO2 accountable for the electrochemical CO2 reduction reaction (CO2 RR) performance under electrocatalytic conditions, which then is corroborated in the subsequent CO2 RR experiments over SnO2 with different morphologies (nanorods, nanoparticles, and nanosheets) in combination with in situ characterizations. This proposed methodology is further extended to the SnO electrocatalysts, providing helpful insights into catalytic structures. It is believed that our proposed standard research paradigm is also applicable to other electrocatalytic systems, in the meantime, decreases the discrepancy between theory and experiments, and accelerates the design of catalyst structures that achieve sustainable performance for energy conversion.

Well-defined N3 C1 -anchored Single-Metal-Sites for Oxygen Reduction Reaction

N-, C-, O-, S-coordinated single-metal-sites (SMSs) have garnered significant attention due to the potential for significantly enhanced catalytic capabilities resulting from charge redistribution. However, significant challenges persist in the precise design of well-defined such SMSs, and the fundamental comprehension has long been impeded in case-by-case reports using carbon materials as investigation targets. In this work, the well-defined molecular catalysts with N3 C1 -anchored SMSs, i.e., N-confused metalloporphyrins (NCPor-Ms), are calculated for their catalytic oxygen reduction activity. Then, NCPor-Ms with corresponding N4 -anchored SMSs (metalloporphyrins, Por-Ms), are synthesized for catalytic activity evaluation. Among all, NCPor-Co reaches the top in established volcano plots. NCPor-Co also shows the highest half-wave potential of 0.83 V vs. RHE, which is much better than that of Por-Co (0.77 V vs. RHE). Electron-rich, low band gap and regulated d-band center contribute to the high activity of NCPor-Co. This study delves into the examination of well-defined asymmetric SMS molecular catalysts, encompassing both theoretical and experimental facets. It serves as a pioneering step towards enhancing the fundamental comprehension and facilitating the development of high-performance asymmetric SMS catalysts.