Unlocking the Transition of Electrochemical Water Oxidation Mechanism Induced by Heteroatom Doping

Coupling Built-in Electric Field and Lewis Acid Triggers the Lattice Oxygen-Mediated Mechanism for Efficient Water Oxidation

The oxygen evolution reaction catalyst triggering lattice oxygen-mediated mechanism (LOM) can break the activity limitation imposed by the adsorbate evolution mechanism scaling relationship. However, triggering LOM is challenging due to the thermodynamic disadvantages associated with lattice oxygen redox reactions. Here, a Lewis acid-modified layered double hydroxides (LDH) heterojunction catalyst (LDH/Cr2O3) is designed. The asymmetric charge distribution at the heterojunction interface, induced by the built-in electric field, shifts the electron transfer center from the lower Hubbard band to non-bonding oxygen, thereby activating LOM. The enrichment of OH- and the enhanced covalency of the metal-oxygen bond by Lewis acid optimize the pH-dependent and high-energy consumption during the hydroxyl (OH*) deprotonation process of LOM. Furthermore, the activation of lattice oxygen and accelerated OH* deprotonation facilitate the surface reconstruction of LDH. Consequently, the LDH/Cr2O3 exhibits excellent catalytic activity, with an overpotential of only 237 mV (at 10 mA cm-2) in 1.0 m KOH electrolyte. The catalyst maintains excellent activity in simulated seawater and 0.1 m KOH electrolyte. Furthermore, it demonstrates outstanding practical functionality, as the assembled commercial-scale alkaline electrolyzer operates stably for 50 h. This work may provide new approaches and theoretical insights for triggering and optimizing LOM.

Se-functionalized metal-free catalysts rich in sp3-hybridized carbon enable efficient oxygen electroreduction

Carbon-based metal-free materials are emerging as leading candidates to replace noble-metal catalysts in the oxygen reduction reaction (ORR). Herein, we introduce a facile secondary carbonation technique for fabricating Se and N co-doped metal-free catalysts using a zeolite imidazole framework (ZIF-8) as the precursor. The optimal electrocatalyst, designated SeNC-900, exhibited good ORR performance under both alkaline and acidic conditions, with half-wave potentials of 0.864 V and 0.731 V (vs. RHE), respectively. Density functional theory (DFT) calculations reveal that the enhanced activity of SeNC-900 originates from Se doping, which triggers an increase in the intrinsic defects of sp3-hybridized C. Concurrently, the sp3-hybridized C, in concert with Se dopant, modulates the electronic structure of the active C atoms. This work not only underscores the significance of tuning the electronic structure to boost catalytic performance by enriching intrinsic defects but also presents a fresh insight into the effect of heteroatom doping on carbon-based materials for electrocatalysis.

Enhanced oxygen evolution reaction through improved lattice oxygen activity via carbon dots incorporation into MOFs

Emerging of the lattice oxygen mechanism (LOM) provides a new opportunity for enhancing oxygen evolution reaction (OER) activity. However, its stability suffers from metal cation dissolution and lattice oxygen anionic redox chemistry. In this paper, carbon dots (CDs)-modified nickel-iron MOF (Metal-Organic Framework) nanosheets (NiFe-BDC/CDs) were prepared for efficient OER electrocatalysis. The introduction of CDs promotes the hybridization of the O 2p band in the MOF with the metal 3d band near the Fermi level, leading to improved involvement of lattice oxygen in the oxygen evolution reaction. Additionally, C-M bonds formed between CDs and metal sites in MOF enhanced the stability of electrocatalyst. As results, the prepared NiFe-BDC/CDs electrodes demonstrated a current density of 100 mA cm-2 at overpotentials of 235 and 250 mV in alkaline freshwater and alkaline seawater, respectively, and a remarkable stability in alkaline seawater at 500 mA cm-2 for >100 h. This study provides a simple and versatile strategy for the design of OER electrocatalysts with highly active transition metal-based MOFs.

Partially amorphous NiFe layered double hydroxides enabling highly-efficiency oxygen evolution reaction at high current density

Layered double hydroxide (LDH) serves as an innovative catalyst for water electrolysis, showcasing outstanding performance in the oxygen evolution reaction (OER) under alkaline conditions. However, it faces challenges due to its low electrical conductivity and limited accessibility to active sites. In this work, the flexibility advantages of disordered amorphous and ordered crystals in NiFe LDH were combined to improve OER performance and maintain long-term stability. This combination induces a variety of effects, including improving the intrinsic activity, changing the OER mechanism from adsorb evolution mechanism (AEM) to lattice oxygen mechanism (LOM), and promoting the reaction kinetics of the catalyst. Moreover, the porous structure of NiFe LDH can efficiently alleviate the issue of local acidic environment induced by prolonged OER reaction, satisfying the criteria for long-term stability. Therefore, the NiFe-2.0 LDH catalyst only requires an ultralow overpotential of 189 mV at a current density of 10 mA cm-2 with Tafel slope of 43 mV dec-1. More importantly, the catalyst not only displays excellent electrocatalytic activity with an overpotential of 289 mV but also represents an outstanding stability over 80 h at an ultra-high current density of 1 A cm-2. This study provides a promising strategy for optimizing the catalytic activity and stability of catalyst at ampere current density, which is expected to achieve commercial applications.

Oxyanions Enhancing Crystallinity of Reconstructed Phase for Oxygen Evolution Reaction

The catalysts were always undergoing continuous amorphization and dissolution of active structure in operating condition, hindering the compatibility between stability and activity for oxygen evolution reaction (OER). Herein, we propose the selective adsorption of leached NO3 - to strengthen the crystallinity and activity of surface reconstructed layer with amorphous and crystalline (a-c) heterojunction. Taking a-c Ni doped Fe2O(OH)3NO3 ⋅ H2O (Ni-FeNH) as a model precatalyst, we uncover that the leached NO3 - are readily adsorbs on the crystalline phase in the formed a-c Fe(Ni)OOHduring OER, lowering the disorder degree and further activating Ni and Fe ion of the crystalline Fe(Ni)OOH on a-c heterojunctions. Accordingly, Ni-FeNH deliver a low overpotential of 303 mV and high durability of 500 hours at 500 mA cm-2 for OER. Particularly, constructing industrial water electrolysis equipment exhibits high stability of 100 hours under a high operating current of 8000 mA.

Modulating the Coordination Environment of Cu-Embedded MoX2 (X = S, Se, and Te) Monolayers for Electrocatalytic Reduction of CO2 to CH4: Unveiling the Origin of Catalytic Activity

The electrochemical CO2 reduction reaction (CO2RR) is a promising approach to alleviating global warming and emerging energy crises. Yet, the CO2RR efficiency is impeded by the need for electrocatalysts with good selectivity and efficiency. Recently, single-atom catalysts (SACs) have attracted much attention in electrocatalysis and are more efficient than traditional metal-based catalysts. In this study, we modeled a Cu single atom embedded on MoX2 (X = Se and Te) monolayer with a single chalcogen (X) vacancy as SAC. Employing the dispersion-corrected density functional theory (DFT-D3) method, the electrocatalytic CO2RR activity of the Cu-MoX2 SACs is systematically investigated through significant descriptors, such as the Gibbs free energy change, charge density difference, and COHP analysis. The stability of SACs, CO2 adsorption configurations, and all possible reaction pathways for the formation of C1 products (HCOOH, CO, CH3OH, and CH4) were examined. All of the Cu-MoX2 SACs are stable and show high catalytic selectivity for the CO2RR by significantly suppressing the hydrogen evolution reaction (HER). We found that the catalytic activity is mainly due to the level of antibonding states filling between the Cu atom and *OCHOH intermediate. Among the C1 products, CH4 is selectively produced in all three SACs. Notably, there is a decrease in the limiting potential (UL) when X changes from S to Te in Cu-MoX2. Among these three SACs, Cu-MoTe2 SAC is the most promising catalyst for reducing CO2 to CH4, with as low as UL of -0.34 V vs RHE. Our results demonstrate that the local coordination environment in SACs has a significant impact on the catalytic activity of CO2RR.

Optimizing Acidic Oxygen Evolution with Manganese-Doped Ruthenium Dioxide Assembly

Ruthenium dioxide (RuO2) is one of the promising catalysts for the acidic oxygen evolution reaction (OER). However, designing RuO2 catalysts with good activity and stability remains a significant challenge. In this work, we propose the manganese (Mn)-doped RuO2 assembly as a catalyst for the OER with improved activity and stability. Consequently, the optimized 7% Mn-RuO2 exhibits exceptional OER activity in 0.5 M H2SO4, delivering a low overpotential of 195 mV to achieve a current density of 10 mA cm-2. Furthermore, it displays the highest mass activity among all the tested catalysts, reaching 587.9 A gRu-1 at 1.5 V versus the reversible hydrogen electrode (vs RHE), which is 7.8 and 139.8 times higher than those of undoped RuO2 and commercial RuO2, respectively. Moreover, 7% Mn-RuO2 demonstrates remarkable stability over a continuous operation to 100 h (at 10 mA cm-2) without significant performance attenuation. Additionally, theoretical calculations indicate that Mn doping weakens the adsorption of the OER intermediates and modifies the potential-determining step (PDS) of the OER, thereby reducing the OER overpotential. Consequently, strategies involving Mn doping can effectively enhance the overall kinetics of the OER. This work offers a promising approach for the design of efficient water electrolysis catalysts.

Active Site Customizing of Metal-Organic Materials for Highly Efficient Oxygen Evolution

Elucidating the correlation of active sites and catalytic activity in multi-component metal-organic frameworks (MOFs) is key to understanding the mechanism of oxygen evolution reaction (OER), yet it remains nebulous. Herein, a direct pathway combining theoretical prediction with anchoring high-valence metals is proposed on MOFs to reveal the mechanism of the OER reaction. Density functional theory (DFT) predicts that the co-modulation by Mo and Co atoms can enhance the conductance of CoMOF and optimize the adsorption-free energies of the OER intermediates. Guided by the theoretical prediction, the Co-based MOFs grown on Ni foams are doped with high valence Mo, which is used as model catalysts for the quantitative study of the composition-dependent OER performance. With Co/Mo in the ratio of 5:1 for the highest OER activity (impressively overpotential of 324 mV at 100 mA cm-2 and a Tafel slope of 96.07 mV dec-1) and excellent stability (maintains for 200 h at 100 mA cm-2), the catalysts in this work is superior to commercial benchmarks electrocatalysts (RuO2/NF, 420 mV, 199.12 mV dec-1). This work sheds light on the tailoring of the active sites of MOFs, which is highly correlated with the activity of the OER.

Electrochemical reconfiguration of iron-modified Ni3S2 surface induced oxygen vacancies to immobilize sulfate for enhanced oxygen evolution reaction

There is an urgent need for highly active, durable, and low-cost electrocatalysts to overcome the shortcomings of high overpotential in the oxygen evolution reaction (OER) process. In this work, the nickel-iron hydroxysulfate rich in sulfate and oxygen vacancies (SO42-@Fe-NiOOH-Ov/NiS) is legitimately constructed. SO42-@Fe-NiOOH-Ov/NiS only requires a low overpotentials of 190 mV and 232 mV at 10 mA cm-2 and 100 mA cm-2 current densities in 1 M KOH, with excellent stability for 200 h at 100 mA cm-2 current density. In situ Raman spectroscopy and Fourier transform infrared spectroscopy demonstrated the stable adsorption of more SO42- on the surface of catalyst. Density functional theory calculations testify surface reconstruction, doped Fe and oxygen vacancies significantly reduced the adsorption energy of sulfate on the surface. More importantly, the formation of *OOH to O2 is facilitated by the highly hydrogen bonding between SO42- and *OOH, accelerating the OER process.

Magnesium-promoted rapid self-reconstruction of NiFe-based electrocatalysts toward efficient oxygen evolution

The acceleration of active sites formation through surface reconstruction is widely acknowledged as the crucial factor in developing high-performance oxygen evolution reaction (OER) catalysts for water splitting. Herein, a simple one-step corrosion method and magnesium (Mg)-promoted strategy are reported to develop the NiFe-based catalyst with enhanced OER performance. The Mg is introduced in NiFe materials to preparate a "pre-catalyst" Mg-Ni/Fe2O3. In-situ Raman shows that Mg doping would accelerate the self-reconstruction of Ni/Fe2O3 to form active NiOOH species during OER. In-situ infrared indicates that Mg doping benefits the formation of *OOH intermediate. Theoretical analysis further confirms that Mg doping can optimize the adsorption of oxygen intermediates, accelerating the OER kinetics. Accordingly, the Mg-Ni/Fe2O3 catalyst exhibits excellent OER performance with overpotential of 168 mV at 10 mA cm-2. The anion exchange membrane water electrolyzer achieved 200 mA cm-2 at voltage of 1.53 V, showing excellent stability over 500 h as well. This work demonstrates the potential of Mg-promoted strategy in regulating the activity of transition metal-based OER electrocatalysts.

Constructing Dense CoRu-CoMoO4 Heterointerfaces with Electron Redistribution for Synergistically Boosted Alkaline Electrocatalytic Water Splitting

Constructing metal alloys/metal oxides heterostructured electrocatalysts with abundant and strongly coupling interfaces is vital yet challenging for practical electrocatalytic water splitting. Herein, CoRu nanoalloys uniformly anchored on CoMoO4 nanosheet heterostructured electrocatalyst (CoRu-CoMoO4/NF) are synthesized via a self-templated strategy by simply annealing of Ru-etched CoMoO4/NF precursor in a reduction atmosphere. The dense and robustly coupled interface not only provides abundant active sites for water splitting but also strengthens the charge transfer efficiency. Furthermore, the theoretical calculations unveil that the strong electronic interaction at CoRu-CoMoO4 interface can induce an interfacial electron redistribution and reduce the energetic barriers for the hydrogen and oxygen intermediates, thereby accelerating the  hydrogen evolution reaction (HER) and  oxygen evolution reaction (OER) kinetics. The resultant catalyst only requires the overpotentials of 49 mV for HER and 209 mV for OER at 10 mA cm-2. Moreover, the constructed CoRu-CoMoO4||CoRu-CoMoO4 two-electrode cell achieves a cell voltage of 1.54 V at 10 mA cm-2, outperforming the benchmark Pt/C||IrO2. This work explores an avenue for the rational design of heterostructured electrocatalysts with abundant interfaces for practical water-splitting electrocatalysis.

The cobalt-based metal organic frameworks array derived CoFeNi-layered double hydroxides anode and CoP/FeNi2P heterojunction cathode for ampere-level seawater overall splitting

The seawater electrolysis technology powered by renewable energy is recognized as the promising "green hydrogen" production method to solve serious energy and environmental problems. The lack of low-cost and ampere-level current OER (oxygen evolution reaction) and HER (hydrogen evolution reaction) catalysis limits their industrial application. In this work, a unique tri-metal (Co/Fe/Ni) layered double hydroxide hollow array anode catalyst (CFN-LDH/NF) and the CoP/FeNi2P heterojunction hollow array cathode are successfully prepared via one in-situ growth of Co-MOF on nickel foam (Co-MOF/NF) precursor, which exhibits excellent catalytic performance. The η1000 values of 352 and 392 mV are achieved for CFN-LDH/NF (OER catalyst) in 1.0 M KOH and alkaline seawater solution, respectively. The CFNP/NF with a low overpotential of 281 mV is required to reach 1000 mA cm-2 current density for HER in 1.0 M KOH solution, while the η1000 in alkaline seawater solution is 312 mV. The CFN-LDH/NF||CFNP/NF electrolyzer exhibits excellent long-term durability over 100 h, achieving current density of 500 mA cm-2 at 1.825 V in 1.0 M KOH solution. The construction of hollow tri-metal LDH and phosphides heterostructures may open a new and relatively unexplored path for fabricating high performance seawater splitting catalysis.

Oxygen Evolution Enhancement of Oxalate-Based Nickel-Iron MOF through Bipyridine Coordinated Strategy

The catalytic performance of oxalate-based Ni-Fe metal-organic frameworks (MOFs) in the oxygen evolution reaction (OER) was investigated via a coordination strategy. The bidentate chelating ligand 2,2'-bpy (2,2'-bipyridine), was utilized to improve the catalytic kinetics under ambient conditions. The results revealed that a MOF-to-MOF transformation including the formation of [M(2,2'-bpy)n]2/3+ (M = Ni/Fe, n = 1-3) could boost alkaline OER, giving an impressive ultralow overpotential of 220 mV at a current density of 10 mA/cm2 in a 1 M KOH solution, surpassing the performance of control group activity of oxalate-based Ni-Fe MOF. However, excessive addition of the ligand had a negative effect, leading to decreased activity. Further investigation revealed the double role of 2,2'-bpy: Both promote and suppress catalytic reactions. The catalytic mechanism was then discussed, highlighting the potential of secondary ligands to effectively fine-tune the catalytic behavior of these materials.

Construction of "Metal Defect/Oxygen Defect Junction" in ZnFe2O4-NiCo2O4 Heterostructures for Enhancing Electrocatalytic Oxygen Evolution

Defect engineering is a promising approach to improve the conductivity and increase the active sites of transition metal oxides used as catalysts for the oxygen evolution reaction (OER). However, when metal defects and oxygen defects coexist closely within the same crystal, their compensating charges can diminish the benefits of both defect structures on the catalyst's local electronic structure. To address this limitation, a novel strategy that employs the heterostructure interface of ZnFe2O4-NiCo2O4 to spatially separate the metal defects from the oxygen defects is proposed. This configuration positions the two types of defects on opposite sides of the heterojunction interface, creating a unique structure termed the "metal-defect/oxygen-defect junction". Physical characterization and simulations reveal that this configuration enhances electron transfer at the heterostructure interface, increases the oxidation state of Fe on the catalyst surface, and boosts bulk charge carrier concentration. These improvements enhance active site performance, facilitating hydroxyl adsorption and deprotonation, thereby reducing the overpotential required for the OER.

Confining Flat Ru Islands into TiO2 Lattice with the Coexisting Ru-O-Ti and Ru-Ti Bonds for Ultra-Stable Hydrogen Evolution at Amperometric Current Density and Hydrogen Oxidation at High Potential

Effective hydrogen evolution reaction (HER) under high current density and enhanced hydrogen oxidation reaction (HOR) over a wide potential range remain challenges for Ru-based electrocatalysts because its strong affinity to the adsorbed hydroxyl (OHad) inhibits the supply of the adsorbed hydrogen (Had). Herein, the coexisting Ru─O─Ti and Ru─Ti bonds are constructed by taking TiO2 crystal confined flat-Ru clusters (F-Ru@TiO2) to cope with above-mentioned obstacles. The different electronegativity (χTi = 1.54 < χRu = 2.20< χO = 3.44) can endow Ti in Ru─O─Ti bonds with more positive charge and stabilize Ru of Ru-Ti bonds with the low-valence. The strength of Ru─OHad is then weakened by the oxophilicity of positively charged Ti in Ru─O─Ti bonds and the stronger Ti─OHad bond could release active Ru, especially for low-valence Ru in Ru─Ti bonds, to serve as exclusive Had sites. As expected, F─TiRu@TiO2 shows a low HER overpotential of 74 mV at 1000 mA cm-2 and an ultrahigh mass activity (j0,m) of 3155 A gRu -1 for HOR. More importantly, F─Ru@TiO2 can tolerate the HER current density of 1000 mA cm-2 for 100 h and the high anodic potential for HOR up to 0.5 V versus RHE.

Tailoring Ni-Fe-B Electronic Effects in Layered Double Hydroxides for Enhanced Oxygen Evolution Activity

NiFe layered double hydroxides (LDHs) are state-of-the-art catalysts for the oxygen evolution reaction (OER) in alkaline media, yet they still face significant overpotentials. Here, quantitative boron (B) doping is introduced in NiFe LDHs (ranging from 0% to 20.3%) to effectively tailor the Ni-Fe-B electronic interactions for enhanced OER performance. The co-hydrolysis synthesis approach synchronizes the hydrolysis rates of Ni and Fe precursors with the formation rate of B─O─M (M: Ni, Fe) bonds, ensuring precise B doping into the NiFe LDHs. It is demonstrated that B, as an electron-deficient element, acts as an "electron sink" at doping levels from 0% to 13.5%, facilitating the transition of Ni2+ to the active Ni3+δ, thereby accelerating OER kinetics. However, excessive B doping (13.5-20.3%) effectively generates oxygen vacancies in the LDHs, which increases electron density at Ni2+ sites and hinders their transition to Ni3+δ, thereby reducing OER activity. Optimal OER performance is achieved at a B doping level of 13.5%, with an overpotential of only 208 mV to reach a current density of 500 mA cm-2, placing it among the most effective OER catalysts to date. This Ni-Fe-B electronic engineering opens new avenues for developing highly efficient anode catalysts for water-splitting hydrogen production.

Recent advances in the synthesis of transition metal hydroxyl oxide catalysts and their application in electrocatalytic oxygen evolution reactions

With the extensive use of fossil energy, people will face the depletion of fossil energy and increasingly severe problems. As a non-polluting, high specific energy density energy source, hydrogen energy is expected to solve this problem by producing hydrogen through electrolysis of water through renewable energy power generation. Water electrolysis technology involves two important half-reactions: the cathode hydrogen evolution reaction (HER) and anode oxygen evolution reaction (OER). The OER is a 4-electron transfer process with a high energy barrier. In order to achieve higher energy conversion, OER catalyst technology is a key part of the process. Researchers have conducted a lot of research into high-performance, high-stability, and highly economical OER catalysts, among which oxyhydroxide (MOOH), as an active substance for OER, has received particular attention. This article provides a timely follow-up to the research on oxyhydroxides, first introducing the two catalytic mechanisms of OER, namely the adsorbate evolution mechanism (AEM) and lattice-oxygen-mediated mechanism (LOM). Then, strategies are proposed to improve OER catalytic performance by increasing catalytic active surface area/active sites, optimizing intermediate adsorption energy based on the AEM, triggering the LOM, and enhancing catalyst stability. Finally, the challenges and future development directions of MOOH catalysts are analyzed, which provides guidance for the design and preparation of high-performance OER catalysts in the future.

Tantalum-induced reconstruction of nickel sulfide for enhanced bifunctional water splitting: Separate activation of the lattice oxygen oxidation and hydrogen spillover

Designing highly active and stable bifunctional catalysts for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) under alkaline conditions is crucial for sustainable overall water splitting. Herein, we present a targeted reconstruction of Ni3S2 by introducing tantalum, achieving remarkable overall water splitting performance through the separate activation of the lattice oxygen mechanism and hydrogen spillover. Electrochemical Mass Spectrometry and in-situ Raman spectroscopy reveal that tantalum induces Ni3S2 to reconstruct into nickel hydroxide during OER, thereby enhancing catalytic activity via the activation of the lattice oxygen mechanism. In the corresponding HER, tantalum promotes the reconstruction of Ni3S2 into oxysulfide, facilitates hydrogen spillover, and acts as an anchor to shorten the spillover distance, improving the HER catalytic performance, as verified by the kinetic isotope effect and theoretical calculations. Therefore, the catalyst-based anion exchange membrane water electrolyzer system achieves a current density of 1 A cm-2 at just 1.97 V, maintaining continuous operation for 500 h. This study offers new insights into the design of bifunctional catalysts, advancing the development of efficient and robust overall water splitting catalysts.

Inducing Intermolecular Oxygen Coupling by Introducing S and FeOOH on Co(OH)2 Nanoneedle Arrays for Industrial Water Oxidation

The design of electrocatalysts for oxygen evolution reaction (OER) remains a limitation of industrial hydrogen production by electrolysis of water. Excellent and stable OER catalysts can be developed by activating lattice oxygen and changing the reaction path. Herein, S and FeOOH on the Co(OH)2 nanoneedle arrays are introduced to construct a heterostructure (S-FeOOH/Co(OH)2/NF) as a proof of concept. Theoretical calculations and experimental suggest that the Co-O-Fe motif formed at the heterogeneous interface with the introduction of FeOOH, inducing electron transfer from Co to Fe, enhancing Co─O covalency and reducing intramolecular charge transfer energy, thereby stimulating direct intramolecular lattice oxygen coupling. Doping of S in FeOOH further accelerates electron transfer, improves lattice oxygen activity, and prevents dissolution of FeOOH. Consequently, the overpotential of S-FeOOH/Co(OH)2/NF is only 199 mV at 10 mA cm-2, and coupled with the Pt/C electrode can be up to 1 A cm-2 under 1.79 V and remain stable for over 120 h in an anion exchange membrane water electrolyzer (AEMWE). This work proposes a strategy for the design of efficient and stable electrocatalysts for industrial water electrolysis and promotes the commercialization of AEMWE.

Topological Synthesis of 2D High-Entropy Multimetallic (Oxy)hydroxide for Enhanced Lattice Oxygen Oxidation Mechanism

Owing to sluggish reaction kinetics and high potential, oxygen evolution reaction (OER) electrocatalysts face a trade-off between activity and stability. Herein, an innovative topological strategy is presented for preparing 2D multimetallic (oxy)hydroxide, including ternary CoFeZn, quaternary CoFeMnZn, and high-entropy CoFeMnCuZn. The key to the synthesis lies in using Ca-rich brownmillerite oxide as a precursor, which possesses inherent structural flexibility enabling tailored elemental adjustments and topologically transforms from a point-shared structure of metal-oxygen octahedrons into an edge-shared structure under alkaline conditions. The presence of Zn in the catalysts causes a shift in the center of the O2p band toward the Fermi level, resulting in more Co4+ species, which drive holes into oxygen ligands to promote intramolecular oxygen coupling. The triggered lattice oxidation mechanism is identified by detecting peroxo-like (O2 2-) negative species using tetramethylammonium chemical probe, along with 18O isotope labeling experiments. As a result, the catalyst demonstrates an overpotential of 267 mV at 10 mA cm-2, ranking it among the top-performing non-Ni-based catalysts. Importantly, the catalysts also show high Fe-leaching resistance during OER compared to conventional NiFe and CoFe hydroxides/(oxy)hydroxides. The assembled zinc-air battery enables stable operation for over 225 h at a low charging voltage of 1.93 V.

Structure-Activity Relationships in Oxygen Electrocatalysis

Oxygen electrocatalysis, as the pivotal circle of many green energy technologies, sets off a worldwide research boom in full swing, while its large kinetic obstacles require remarkable catalysts to break through. Here, based on summarizing reaction mechanisms and in situ characterizations, the structure-activity relationships of oxygen electrocatalysts are emphatically overviewed, including the influence of geometric morphology and chemical structures on the electrocatalytic performances. Subsequently, experimental/theoretical research is combined with device applications to comprehensively summarize the cutting-edge oxygen electrocatalysts according to various material categories. Finally, future challenges are forecasted from the perspective of catalyst development and device applications, favoring researchers to promote the industrialization of oxygen electrocatalysis at an early date.

In-situ construction of iron-modified nickel nanoparticles assisted by hexamethylenetetramine with the internal and external collaboration for highly selective electrocatalytic carbon dioxide reduction

Carbon dioxide (CO2) electroreduction provides a sustainable route for realizing carbon neutrality and energy supply. Up to now, challenges remain in employing abundant and inexpensive nickel materials as candidates for CO2 reduction due to their low activity and favorable hydrogen evolution. Here, the representative iron-modified nickel nanoparticles embedded in nitrogen-doped carbon (Ni1-Fe0.125-NC) with the porous botryoid morphology were successfully developed. Hexamethylenetetramine is used as nitrogen-doped carbon source. The collaboration of internal lattice expansion with electron effect and external confinement effect with size effect endows the significant enhancement in electrocatalytic CO2 reduction. The optimized Ni1-Fe0.125-NC exhibits broad potential ranges for continuous carbon monoxide (CO) production. A superb CO Faradaic efficiency (FECO) of 85.0 % realized at -1.1 V maintains a longtime durability over 35 h, which exceeds many state-of-the-art metal catalysts. Theoretical calculations further confirm that electron redistribution promotes the desorption of CO in the process for favorable CO production. This work opens a new avenue to design efficient nickel-based materials by considering the intrinsic structure and external confinement for CO2 reduction.

The Role of Phosphorus on Alkaline Hydrogen Oxidation Electrocatalysis for Ruthenium Phosphides

Transition metal/p-block compounds are regarded as the most essential materials for electrochemical energy converting systems involving various electrocatalysis. Understanding the role of p-block element on the interaction of key intermediates and interfacial water molecule orientation at the polarized catalyst-electrolyte interface during the electrocatalysis is important for rational designing advanced p-block modified metal electrocatalysts. Herein, taking a sequence of ruthenium phosphides (including Ru2P, RuP and RuP2) as model catalysts, we establish a volcanic-relation between P-proportion and alkaline hydrogen oxidation reaction (HOR) activity. The dominant role of P for regulating hydroxyl binding energy is validated by active sites poisoning experiments, pH-dependent infection-point behavior, in situ surface enhanced infrared absorption spectroscopy, and density functional theory calculations, in which P could tailor the d-band structure of Ru, optimize the hydroxyl adsorption sites across the Ru-P moieties, thereby leading to improved proportion of strongly hydrogen-bonded water and facilitated proton-coupled electron transfer process, which are responsible for the enhanced alkaline HOR performance.

Dual Polarization of Ni Sites at VOx-Ni3N Interface Boosts Ethanol Oxidation Reaction

Substituting thermodynamically favorable ethanol oxidation reaction (EOR) for oxygen evolution reaction (OER) engenders high-efficiency hydrogen production and generates high value-added products as well. However, the main obstacles have been the low activity and the absence of an explicit catalytic mechanism. Herein, a heterostructure composed of amorphous vanadium oxide and crystalline nickel nitride (VOx-Ni3N) is developed. The heterostructure immensely boosts the EOR process, achieving the current density of 50 mA cm-2 at the low potential of 1.38 V versus reversible hydrogen electrode (RHE), far surpassing the sluggish OER (1.65 V vs RHE). Electrochemical impedance spectroscopy indicates that the as-fabricated heterostructure can promote the adsorption of OH- and the generation of the reactive species (O*). Theoretical calculations further outline the dual polarization of the Ni site at the interface, specifically the asymmetric charge redistribution (interfacial polarization) and in-plane polarization. Consequently, the dual polarization modulates the d-band center, which in turn regulates the adsorption/desorption strength of key reaction intermediates, thereby facilitating the entire EOR process. Moreover, a VOx-Ni3N-based electrolyzer, coupling hydrogen evolution reaction (HER) and EOR, attains 50 mA cm-2 at a low cell voltage of ≈1.5 V. This work thus paves the way for creating dual polarization through interface engineering toward broad catalysis.

Covalently grafting a covalent organic framework onto carbon nanotubes as a bifunctional electrocatalyst for overall water splitting

We propose a simple strategy to fabricate a composite material consisting of amino-functionalized carbon nanotubes (NCNTs) grafted with a covalently bonded Ni(II)-based covalent organic framework (COF) for electrocatalytic water splitting. The resulting electrocatalyst demonstrates remarkable catalytic efficiency in both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) under alkaline conditions.

Advances in Noble Metal Electrocatalysts for Acidic Oxygen Evolution Reaction: Construction of Under-Coordinated Active Sites

Renewable energy-driven proton exchange membrane water electrolyzer (PEMWE) attracts widespread attention as a zero-emission and sustainable technology. Oxygen evolution reaction (OER) catalysts with sluggish OER kinetics and rapid deactivation are major obstacles to the widespread commercialization of PEMWE. To date, although various advanced electrocatalysts have been reported to enhance acidic OER performance, Ru/Ir-based nanomaterials remain the most promising catalysts for PEMWE applications. Therefore, there is an urgent need to develop efficient, stable, and cost-effective Ru/Ir catalysts. Since the structure-performance relationship is one of the most important tools for studying the reaction mechanism and constructing the optimal catalytic system. In this review, the recent research progress from the construction of unsaturated sites to gain a deeper understanding of the reaction and deactivation mechanism of catalysts is summarized. First, a general understanding of OER reaction mechanism, catalyst dissolution mechanism, and active site structure is provided. Then, advances in the design and synthesis of advanced acidic OER catalysts are reviewed in terms of the classification of unsaturated active site design, i.e., alloy, core-shell, single-atom, and framework structures. Finally, challenges and perspectives are presented for the future development of OER catalysts and renewable energy technologies for hydrogen production.

Nitrogen-Mediated Promotion of Cobalt-Based Oxygen Evolution Catalyst for Practical Anion-Exchange Membrane Electrolysis

Scarce and expensive iridium oxide is still the cornerstone catalyst of polymer-electrolyte membrane electrolyzers for green hydrogen production because of its exceptional stability under industrially relevant oxygen evolution reaction (OER) conditions. Earth-abundant transition metal oxides used for this task, however, show poor long-term stability. We demonstrate here the use of nitrogen-doped cobalt oxide as an effective iridium substitute. The catalyst exhibits a low overpotential of 240 mV at 10 mA cm-2 and negligible activity decay after 1000 h of operation in an alkaline electrolyte. Incorporation of nitrogen dopants not only triggers the OER mechanism switched from the traditional adsorbate evolution route to the lattice oxygen oxidation route but also achieves oxygen nonbonding (ONB) states as electron donors, thereby preventing structural destabilization. In a practical anion-exchange membrane water electrolyzer, this catalyst at anode delivers a current density of 1000 mA cm-2 at 1.78 V and an electrical efficiency of 47.8 kW-hours per kilogram hydrogen.

Tunable Pt-NiO interaction-induced efficient electrocatalytic water oxidation and methanol oxidation

Metal-support interaction engineering is considered an efficient strategy for optimizing the catalytic activity. Nevertheless, the fine regulation of metal-support interactions as well as understanding the corresponding catalytic mechanisms (particularly those of non-carbon support-based counterparts) remains challenging. Herein, a controllable adsorption-impregnation strategy was proposed for the preparation of a porous nonlayered 2D NiO nanoflake support anchored with different forms of Pt nanoarchitectures, i.e. single atoms, clusters and nanoparticles. Benefiting from the unique porous architecture of NiO nanosheets, abundant active defect sites facilitated the immobilization of Pt single atoms onto the NiO crystal, resulting in NiO lattice distortion and thus changing the valence state of Pt, chemical bonding, and the coordination environment of the metal center. The synergy of the porous NiO support and the unexpected Pt single atom-NiO interactions effectively accelerated mass transfer and reduced the reaction kinetic barriers, contributing to a significantly enhanced mass activity of 5.59 A mgPt -1 at an overpotential of 0.274 V toward the electrocatalytic oxygen evolution reaction (OER) while 0.42 A mgPt -1 at a potential of 0.7 V vs. RHE for the methanol oxidation reaction (MOR) in an alkaline system, respectively. This work may offer fundamental guidance for developing metal-loaded/dispersed support nanomaterials toward electrocatalysis through the fine regulation of metal-support interactions.

Ultrathin High-Entropy Fe-Based Spinel Oxide Nanosheets with Metalloid Band Structures for Efficient Nitrate Reduction toward Ammonia

Spinel oxides with tunable chemical compositions have emerged as versatile electrocatalysts, however their performance is greatly limited by small surface area and low electron conductivity. Here, ultrathin high-entropy Fe-based spinel oxides nanosheets are rationally designed (i.e., (Co0.2Ni0.2Zn0.2Mg0.2Cu0.2)Fe2O4; denotes A5Fe2O4) in thickness of ≈4.3 nm with large surface area and highly exposed active sites via a modified sol-gel method. Theoretic and experimental results confirm that the bandgap of A5Fe2O4 nanosheets is significantly smaller than that of ordinary Fe-based spinel oxides, realizing the transformation of binary spinel oxide from semiconductors to metalloids. As a result, such A5Fe2O4 nanosheets manifest excellent performance for the nitrate reduction reaction (NO3 -RR) to ammonia (NH3), with a NH3 yield rate of ≈2.1 mmol h-1 cm-2 at -0.5 V versus Reversible hydrogen electrode, outperforming other spinel-based electrocatalysts. Systematic mechanism investigations reveal that the NO3 -RR is mainly occurred on Fe sites, and introducing high-entropy compositions in tetrahedral sites regulates the adsorption strength of N and O-related intermediates on Fe for boosting the NO3 -RR. The above findings offer a high-entropy platform to regulate the bandgap and enhance the electrocatalytic performance of spinel oxides.

Advanced Materials for NH3 Capture: Interaction Sites and Transport Pathways

Ammonia (NH3) is a carbon-free, hydrogen-rich chemical related to global food safety, clean energy, and environmental protection. As an essential technology for meeting the requirements raised by such issues, NH3 capture has been intensively explored by researchers in both fundamental and applied fields. The four typical methods used are (1) solvent absorption by ionic liquids and their derivatives, (2) adsorption by porous solids, (3) ab-adsorption by porous liquids, and (4) membrane separation. Rooted in the development of advanced materials for NH3 capture, we conducted a coherent review of the design of different materials, mainly in the past 5 years, their interactions with NH3 molecules and construction of transport pathways, as well as the structure-property relationship, with specific examples discussed. Finally, the challenges in current research and future worthwhile directions for NH3 capture materials are proposed.

Strong Interface Coupling Enables Stability of Amorphous Meta-Stable State in CoS/Ni3S2 for Efficient Oxygen Evolution

Rational design of heterostructure catalysts through phase engineering strategy plays a critical role in heightening the electrocatalytic performance of catalysts. Herein, a novel amorphous/crystalline (a/c) heterostructure (a-CoS/Ni3S2) is manufactured by a facile hydrothermal sulfurization method. Strikingly, the interface coupling between amorphous phase (a-CoS) and crystalline phase (Ni3S2) in a-CoS/Ni3S2 is much stronger than that between crystalline phase (c-CoS) and crystalline phase (Ni3S2) in crystalline/crystalline (c/c) heterostructure (c-CoS/Ni3S2) as control sample, which makes the meta-stable amorphous structure more stable. Meanwhile, a-CoS/Ni3S2 has more S vacancies (Sv) than c-CoS/Ni3S2 because of the presence of an amorphous phase. Eventually, for the oxygen evolution reaction (OER), the a-CoS/Ni3S2 exhibits a significantly lower overpotential of 192 mV at 10 mA cm-2 compared to the c-CoS/Ni3S2 (242 mV). An exceptionally low cell voltage of 1.51 V is required to achieve a current density of 50 mA cm-2 for overall water splitting in the assembled cell (a-CoS/Ni3S2 || Pt/C). Theoretical calculations reveal that more charges transfer from a-CoS to Ni3S2 in a-CoS/Ni3S2 than in c-CoS/Ni3S2, which promotes the enhancement of OER activity. This work will bring into play a fabrication strategy of a/c catalysts and the understanding of the catalytic mechanism of a/c heterostructures.

P-Incorporation Induced Enhancement of Lattice Oxygen Participation in Double Perovskite Oxides to Boost Water Oxidation

Activating the lattice oxygen in the catalysts to participate in the oxygen evolution reaction (OER), which can break the scaling relation-induced overpotential limitation (> 0.37 V) of the adsorbate evolution mechanism, has emerged as a new and highly effective guide to accelerate the OER. However, how to increase the lattice oxygen participation of catalysts during OER remains a major challenge. Herein, P-incorporation induced enhancement of lattice oxygen participation in double perovskite LaNi0.58Fe0.38P0.07O3-σ (PLNFO) is studied. P-incorporation is found to be crucial for enhancing the OER activity. The current density reaches 1.35 mA cmECSA -2 at 1.63 V (vs RHE), achieving a sixfold increase in intrinsic activity. Experimental evidences confirm the dominant lattice oxygen participation mechanism (LOM) for OER pathway on PLNFO. Further electronic structures reveal that P-incorporation shifts the O p-band center by 0.7 eV toward the Fermi level, making the states near the Fermi level more O p character, thus facilitating LOM and fast OER kinetics. This work offers a possible method to develop high-performance double perovskite OER catalysts for electrochemical water splitting.

Tuning the Electronic Property of Reconstructed Atomic Ni-CuO Cluster Supported on N/O-C for Electrocatalytic Oxygen Evolution

Electrochemical activation usually accompanies in situ atom rearrangement forming new catalytic sites with higher activity due to reconstructed atomic clusters or amorphous phases with abundant dangling bonds, vacancies, and defects. By harnessing the pre-catalytic process of reconstruction, a multilevel structure of CuNi alloy nanoparticles encapsulated in N-doped carbon (CuNi nanoalloy@N/C) transforms into a highly active compound of Ni-doped CuO nanocluster supported on (N/O-C) co-doped C. Both the exposure of accessible active sites and the activity of individual active sites are greatly improved after the pre-catalytic reconstruction. Manipulating the Cu/Ni ratios of CuNi nanoalloy@N/C can tailor the electronic property and d-band center of the high-active compound, which greatly optimizes the energetics of oxygen evolution reaction (OER) intermediates. This interplay among Cu, Ni, C, N, and O modifies the interface, triggers the active sites, and regulates the work functions, thereby realizing a synergistic boost in OER.

Scalable One-Pot Fabrication of Carbon-Nanofiber-Supported Noble-Metal-Free Nanocrystals for Synergetic-Dependent Green Hydrogen Production: Unraveling Electrolyte and Support Effects

Electrocatalytic hydrogen evolution reactions (HER) are envisaged as the most promising sustainable approach for green hydrogen production. However, the considerably high cost often associated with such reactions, particularly upon scale-up, poses a daunting challenge. Herein, a facile, effective, and environmentally benign one-pot scalable approach is developed to fabricate MnM (M═Co, Cu, Ni, and Fe) nanocrystals supported over in situ formed carbon nanofibers (MnM/C) as efficient noble-metal-free electrocatalysts for HER. The formation of carbon nanofibers entails impregnating cellulose in an aqueous solution of metal precursors, followed by annealing the mixture at 550 °C. During the impregnation process, cellulose acts as a reactor for inducing the in situ reductions of MnM salts with the assistance of ether and hydroxyl groups to drive the mass production (several grams) of ultralong (5 ± 1 μM) carbon nanofibers ornamented with MnM nanoparticles (10-14 nm in size) at an average loading of 2.87 wt %. For better electrocatalytic HER benchmarking, the fabricated catalysts were tested over different working electrodes, i.e., carbon paper, carbon foam, and glassy carbon, in the presence of different electrolytes. All the fabricated MnM/C catalysts have demonstrated an appealing synergetic-effect-dependent HER activity, with MnCo/C exhibiting the best performance over carbon foam, close to that of the state-of-the-art commercial Pt/C (10 wt % Pt), with an overpotential of 11 mV at 10 mA cm-2, a hydrogen production rate of 2448 mol g-1 h-1, and a prolonged stability of 2 weeks. The HER performance attained by MnCo/C nanofibers is among the highest reported for Pt-free electrocatalysts, thanks to the mutual alloying effect, higher synergism, large surface area, and active interfacial interactions over the nanofibers. The presented findings underline the potential of our approach for the large-scale production of cost-effective electrocatalysts for practical HER.

Heteronuclear Dual Metal Atom Electrocatalysts for Water-Splitting Reactions

Hydrogen is considered a promising substitute for traditional fossil fuels because of its widespread sources, high calorific value of combustion, and zero carbon emissions. Electrocatalytic water-splitting to produce hydrogen is also deemed to be an ideal approach; however, it is a challenge to make highly efficient and low-cost electrocatalysts. Single-atom catalysts (SACs) are considered the most promising candidate to replace traditional noble metal catalysts. Compared with SACs, dual-atom catalysts (DACs) are capable of greater attraction, including higher metal loading, more versatile active sites, and excellent catalytic activity. In this review, several general synthetic strategies and structural characterization methods of DACs are introduced, and recent experimental advances in water-splitting reactions are discussed. The authors hope that this review provides insights and inspiration to researchers regarding DACs in electrocatalytic water-splitting.

P-bridged Fe-X-Co coupled sites in hollow carbon spheres for efficient hydrogen generation

Non-precious metals have shown attractive catalytic prospects in hydrogen production from ammonia borane hydrolysis. However, the sluggish reaction kinetics in the hydrolysis process remains a challenge. Herein, P-bridged Fe-X-Co coupled sites in hollow carbon spheres (Fe-CoP@C) has been synthesized through in situ template solvothermal and subsequent surface-phosphorization. Benefiting from the optimized electronic structure induced by Fe doping to enhance the specific activity of Co sites, bimetallic synergy and hollow structure, the as-prepared Fe-CoP@C exhibits superior performances with a turnover frequency (TOF) of 183.5 min-1, and stability of over 5 cycles for ammonia borane hydrolysis, comparable to noble metal catalysts. Theoretical calculations reveal that the P-bridged Fe-X-Co coupled sites on the Fe-CoP@C catalyst surfaces is beneficial to adsorb reactant molecules and reduce their reaction barrier. This strategy of constructing hollow P-bridged bimetallic coupled sites may open new avenues for non-precious metal catalysis.

Ir Single Atoms Boost Metal-Oxygen Covalency on Selenide-Derived NiOOH for Direct Intramolecular Oxygen Coupling

This investigation probes the intricate interplay of catalyst dynamics and reaction pathways during the oxygen evolution reaction (OER), highlighting the significance of atomic-level and local ligand structure insights in crafting highly active electrocatalysts. Leveraging a tailored ion exchange reaction followed by electrochemical dynamic reconstruction, we engineered a novel catalytic structure featuring single Ir atoms anchored to NiOOH (Ir1@NiOOH). This novel approach involved the strategic replacement of Fe with Ir, facilitating the transition of selenide precatalysts into active (oxy)hydroxides. This elemental substitution promoted an upward shift in the O 2p band and intensified the metal-oxygen covalency, thereby altering the OER mechanism toward enhanced activity. The shift from a single-metal site mechanism (SMSM) in NiOOH to a dual-metal-site mechanism (DMSM) in Ir1@NiOOH was substantiated by in situ differential electrochemical mass spectrometry (DEMS) and supported by theoretical insights. Remarkably, the Ir1@NiOOH electrode exhibited exceptional electrocatalytic performance, achieving overpotentials as low as 142 and 308 mV at current densities of 10 and 1000 mA cm-2, respectively, setting a new benchmark for the electrocatalysis of OER.

Interfacial Engineering Boosting the Activity and Stability of MIL-53(Fe) toward Electrocatalytic Nitrogen Reduction

The electrochemical nitrogen reduction reaction (eNRR) has emerged as a promising strategy for green ammonia synthesis. However, it suffers unsatisfactory reaction performance owing to the low aqueous solubility of N2 in aqueous solution, the high dissociation energy of N≡N, and the unavoidable competing hydrogen evolution reaction (HER). Herein, a MIL-53(Fe)@TiO2 catalyst is designed and synthesized for highly efficient eNRR. Relative to simple MIL-53(Fe), MIL-53(Fe)@TiO2 achieves a 2-fold enhancement in the Faradaic efficiency (FE) with an improved ammonia yield rate by 76.5% at -0.1 V versus reversible hydrogen electrode (RHE). After four cycles of electrocatalysis, MIL-53(Fe)@TiO2 can maintain a good catalytic activity, while MIL-53(Fe) exhibits a significant decrease in the NH3 yield rate and FE by 79.8 and 82.3%, respectively. Benefiting from the synergetic effect between TiO2 and MIL-53(Fe) in the composites, Fe3+ ions can be greatly stabilized in MIL-53(Fe) during the eNRR process, which greatly hinders the catalyst deactivation caused by the electrochemical reduction of Fe3+ ions. Further, the charge transfer ability in the interface of composites can be improved, and thus, the eNRR activity is significantly boosted. These findings provide a promising insight into the preparation of efficient composite electrocatalysts.

Evolution in the Design of Water Oxidation Catalysts with Transition-Metals: A Perspective on Biological, Molecular, Supramolecular, and Hybrid Approaches

Increased demand for a carbon-neutral sustainable energy scheme augmented by climatic threats motivates the design and exploration of novel approaches that reserve intermittent solar energy in the form of chemical bonds in molecules and materials. In this context, inspired by biological processes, artificial photosynthesis has garnered significant attention as a promising solution to convert solar power into chemical fuels from abundantly found H2O. Among the two redox half-reactions in artificial photosynthesis, the four-electron oxidation of water according to 2H2O → O2 + 4H+ + 4e- comprises the major bottleneck and is a severe impediment toward sustainable energy production. As such, devising new catalytic platforms, with traditional concepts of molecular, materials and biological catalysis and capable of integrating the functional architectures of the natural oxygen-evolving complex in photosystem II would certainly be a value-addition toward this objective. In this review, we discuss the progress in construction of ideal water oxidation catalysts (WOCs), starting with the ingenuity of the biological design with earth-abundant transition metal ions, which then diverges into molecular, supramolecular and hybrid approaches, blurring any existing chemical or conceptual boundaries. We focus on the geometric, electronic, and mechanistic understanding of state-of-the-art homogeneous transition-metal containing molecular WOCs and summarize the limiting factors such as choice of ligands and predominance of environmentally unrewarding and expensive noble-metals, necessity of high-valency on metal, thermodynamic instability of intermediates, and reversibility of reactions that create challenges in construction of robust and efficient water oxidation catalyst. We highlight how judicious heterogenization of atom-efficient molecular WOCs in supramolecular and hybrid approaches put forth promising avenues to alleviate the existing problems in molecular catalysis, albeit retaining their fascinating intrinsic reactivities. Taken together, our overview is expected to provide guiding principles on opportunities, challenges, and crucial factors for designing novel water oxidation catalysts based on a synergy between conventional and contemporary methodologies that will incite the expansion of the domain of artificial photosynthesis.

Recent insights on the use of modified Zn-based catalysts in eCO2RR

Converting CO2 into valuable chemicals can provide a new path to mitigate the greenhouse effect, achieving the aim of "carbon neutrality" and "carbon peaking". Among numerous electrocatalysts, Zn-based materials are widely distributed and cheap, making them one of the most promising electrocatalyst materials to replace noble metal catalysts. Moreover, the Zn metal itself has a certain selectivity for CO. After appropriate modification, such as oxide derivatization, structural reorganization, reconstruction of the surfaces, heteroatom doping, and so on, the Zn-based electrocatalysts can expose more active sites and adjust the d-band center or electronic structure, and the FE and stability of them can be effectively improved, and they can even convert CO2 to multi-carbon products. This review aims to systematically describe the latest progresses of modified Zn-based electrocatalyst materials (including organic and inorganic materials) in the electrocatalytic carbon dioxide reduction reaction (eCO2RR). The applications of modified Zn-based catalysts in improving product selectivity, increasing current density and reducing the overpotential of the eCO2RR are reviewed. Moreover, this review describes the reasonable selection and good structural design of Zn-based catalysts, presents the characteristics of various modified zinc-based catalysts, and reveals the related catalytic mechanisms for the first time. Finally, the current status and development prospects of modified Zn-based catalysts in eCO2RR are summarized and discussed.

Ion sieving membrane for direct seawater anti-precipitation hydrogen evolution reaction electrode

In seawater, severe hydroxide-based precipitation on the hydrogen evolution reaction (HER) electrode surface is still a major stumbling block for direct seawater electrolysis. Here, we design a direct seawater HER electrode with excellent anti-precipitation performance based on an Ni(OH)2 nanofiltration membrane in situ grown on nickel foam (NF) at room temperature. The positively charged Ni(OH)2 membrane with nanometer-scale cracks realises an ion sieving function, which apparently hinders the transfer of Mg2+/Ca2+ ions to suppress precipitation, while rapidly transporting OH- and H2O to ensure HER mass transfer. Therefore, the Ni(OH)2-membrane-decorated seawater HER electrode reduces precipitation by about 98.3% and exhibits high activity and stability. Moreover, in the application of a direct seawater electrolyser and magnesium seawater battery, the Ni(OH)2 membrane-decorated electrode also shows low precipitation and high stability. This work highlights a potential strategy to solve HER electrode precipitation in seawater via an ingenious electrode structure design.