A new Pd-Schiff-base complex on boehmite nanoparticles: Its application in Suzuki reaction and synthesis of tetrazoles

Tamarindus indica seed ash extract for C-C coupling under added organics and volatile organic solvent-free conditions: a waste repurposing technique for Suzuki-Miyaura reaction

A tremendous research has been appeared on Pd-catalyzed Suzuki-Miyaura cross-coupling (SMC) during the last four decades due to its high prominence in constructing biaryl motifs of several complexes as well as simple organic compounds of high biological and commercial significance. The use of organic solid waste-derived materials for SMC in benign solvents like water/aqueous media is a very good achievement in these cases. We report in this article the usability of water extract of Tamarindus indica seeds ash (WETS) as a renewable base and reaction medium for Pd(OAc)₂-catalyzed SMC reaction at room temperature (RT). The WETS has been characterized using powder XRD, EDAX, SEM, and FTIR analysis. Furthermore, this process is highly environmentally beneficial by the waste repurposing to prominent chemical transformation along with the advantages such as ambient condition and avoids non-renewable chemicals like volatile organic solvents, ligands, promoters, and bases. Based on these merits and the quick reactions with high yields of products, this method can attain the interest of the scientific community in exploring the waste-derived ashes to significant chemical transformations. Tamarindus indica seed ash extract for C-C coupling under added organics and volatile organic solvent-free conditions: a waste repurposing technique for Suzuki-Miyaura reaction.

Immobilization of Ni(ii) complex on the surface of mesoporous modified-KIT-6 as a new, reusable and highly efficient nanocatalyst for the synthesis of tetrazole and pyranopyrazole derivatives

In this paper, KIT-6@SMTU@Ni was successfully synthesized via a new method of Ni(ii) complex stabilization on modified mesoporous KIT-6, as a novel and green heterogeneous catalyst. The obtained catalyst (KIT-6@SMTU@Ni) was characterized using Fourier transform infrared spectroscopy (FT-IR), Brunauer-Emmett-Teller (BET) calculation, X-ray diffraction (XRD), atomic absorption spectroscopy (AAS), energy-dispersive X-ray spectroscopy (EDS), X-ray mapping, thermogravimetric analysis (TGA) techniques and scanning electron microscopy (SEM). After complete characterization of the catalyst, it was successfully used for the synthesis of 5-substituted 1H-tetrazoles and pyranopyrazoles. Moreover, tetrazoles were synthesized from benzonitrile derivatives and sodium azide (NaN₃). All tetrazole products were synthesized with high TON, TOF and excellent yields (88-98%) in a reasonable time (0.13-8 h), demonstrating the efficiency and practicality of the KIT-6@SMTU@Ni catalyst. Furthermore, pyranopyrazoles were prepared through the condensation reaction of benzaldehyde derivatives with malononitrile, hydrazine hydrate and ethyl acetoacetate with high TON, TOF and excellent yields (87-98%) at appropriate times (2-10.5 h). KIT-6@SMTU@Ni could be reused for five runs without any re-activation. Significantly, this plotted protocol has prominent benefits, such as applying green solvents, the use of commercially available and low-cost materials, excellent separation and reusability of the catalyst, short reaction time, high yield of products and a facile work-up.

A new samarium complex of 1,3-bis(pyridin-3-ylmethyl)thiourea on boehmite nanoparticles as a practical and recyclable nanocatalyst for the selective synthesis of tetrazoles

Boehmite is a natural and environmentally friendly compound. Herein boehmite nanoparticles were primarily synthesized and, then, their surface were modified via 3-choloropropyltrimtoxysilane (CPTMS). Afterwards, a new samarium complex was stabilized on the surface of the modified boehmite nanoparticles (Sm-bis(PYT)@boehmite). The obtained nanoparticles were characterized using thermogravimetric analysis (TGA), energy dispersive X-ray spectroscopy (EDS), Brunauer-Emmett-Teller (BET), wavelength dispersive X-ray spectroscopy (WDX), scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FT-IR), Inductively coupled plasma mass spectrometry (ICP-MS), dynamic light scattering (DLS), and X-ray diffraction (XRD) pattern. Sm-bis(PYT)@boehmite was used as an environmentally friendly, efficient, and organic-inorganic hybrid nanocatalyst in the homoselective synthesis of tetrazoles in polyethylene glycol 400 (PEG-400) as a green solvent. Notably, Sm-bis(PYT)@boehmite is stable and has a heterogeneous nature. Thus, it can be reused for several runs without any re-activation.

Synthesis of tetrazoles catalyzed by a new and recoverable nanocatalyst of cobalt on modified boehmite NPs with 1,3-bis(pyridin-3-ylmethyl)thiourea

In the first part of this work, boehmite nanoparticles (BNPs) were synthesized from aqueous solutions of NaOH and Al(NO₃)₃·9H₂O. Then, the BNPs surface was modified using 3-choloropropyltrimtoxysilane (CPTMS) and then 1,3-bis(pyridin-3-ylmethyl)thiourea ((PYT)₂) was anchored on the surface of the modified BNPs (CPTMS@BNPs). In the final step, a complex of cobalt was stabilized on its surface (Co-(PYT)₂@BNPs). The final obtained nanoparticles were characterized by FT-IR spectra, TGA analysis, SEM imaging, WDX analysis, EDS analysis, and XRD patterns. In the second part, Co-(PYT)₂@BNPs were used as a highly efficient, retrievable, stable, and organic-inorganic hybrid nanocatalyst for the formation of organic heterocyclic compounds such as tetrazole derivatives. Co-(PYT)₂@BNPs as a novel nanocatalyst are stable and have a heterogeneous nature; therefore, they can be recovered and reused again for several consecutive runs without any re-activation.

A Schiff base complex of lanthanum on modified MCM-41 as a reusable nanocatalyst in the homoselective synthesis of 5-substituted 1H-tetrazoles

In this work, mesoporous MCM-41 was modified by a new Schiff-base formed from the condensation of triethylenetatramine and 5-bromosalicylaldehyde. Then, it was used for the stabilization of lanthanum metal (La-Schiff base@MCM-41) as a homoselective, reusable, efficient and biocompatible catalyst in the synthesis of 5-substituted 1H-tetrazole derivatives. The synthesized tetrazoles were characterized using ¹H NMR and FT-IR spectroscopy and methods to measure their physical properties. La-Schiff base@MCM-41 was characterized by using various techniques such as ICP, CHN, XRD, TGA, BET, FT-IR spectroscopy, SEM, EDS and WDX. This catalyst has good stability and a heterogeneous nature, enabling it to be easily recovered and reused several times without significant loss in catalytic activity. This present strategy has important advantages such as utilizing PEG as a green solvent, short reaction times, excellent yields, easy recycling of the catalyst and pure separation of the products. The recovered La-Schiff base@MCM-41 catalyst was characterized by using FT-IR spectroscopy, SEM and AAS.

Investigation of Fe3O4@boehmite NPs as efficient and magnetically recoverable nanocatalyst in the homoselective synthesis of tetrazoles

Magnetic boehmite nanoparticles (Fe3O4@boehmite NPs) were synthesized from a hybrid of boehmite and Fe3O4 nanoparticles. At first, boehmite nanoparticles (aluminum oxide hydroxide) were prepared via a simple procedure in water using commercially available materials such as sodium hydroxide and aluminum nitrate. Then, these nanoparticles were magnetized using Fe3O4 NPs in a basic solution of FeCl2·4H2O and FeCl3·6H2O. Fe3O4@boehmite NPs have advantages of both boehmite nanoparticles and Fe3O4 magnetic materials. Magnetic boehmite nanoparticles have been characterized by various techniques such as TEM, SEM, EDS, WDX, ICP, FT-IR, Raman, XRD and VSM. SEM and TEM images confirmed that particles size are less than 50 nm in diameter with a cubic orthorhombic structure. Then, Fe3O4@boehmite NPs were applied as a homoselective, highly efficient, cheap, biocompatibility, heterogeneous and magnetically recoverable nanocatalyst in the synthesis of 5-substituted 1H-tetrazole derivatives. Fe3O4@boehmite NPs can be recycled for several runs in the synthesis of tetrazoles. Also, all tetrazoles were isolated in high yields, which reveals high activity of Fe3O4@boehmite NPs in the synthesis of tetrazole derivatives. Fe3O4@boehmite NPs shows a good homoselectivity in synthesis of 5-substituted 1H-tetrazole derivatives.

New ecofriendly heterogeneous nano-catalyst for the synthesis of 1-substituted and 5-substituted 1H-tetrazole derivatives

A novel ecofriendly heterogeneous catalyst containing Schiff base coordinated Cu(II) covalently attached to Fe₃O₄@SiO₂ nanoparticles through imidazolium linker [Fe₃O₄@SiO₂-Im(Br)-SB-Cu (II)] was synthesized and characterized by using various techniques. The catalytic efficiency of this nano-catalyst was tested in water in the synthesis of tetrazole derivatives using two one-pot multicomponent reaction (MCR) models: The synthesis of 1-aryl 1H-tetrazole derivatives from the reaction of aniline, triethyl orthoformate, and sodium azide and the synthesis of 5-aryl 1H-tetrazole derivatives from the reaction of benzaldehyde, hydroxy amine hydrochloride, and sodium azide. The investigation showed that (i) The catalyst is highly efficient in the synthesis of tetrazole derivatives with high yield (97%) in aqueous medium and mild temperatures; (ii) The catalytic effectiveness is due to the synergy between the metallic center and the imidazolium ion and (iii) The reuse advantage of the catalyst without contamination or significant loss (12% of loss range) in the catalytic activity.

Tetradentate copper complex supported on boehmite nanoparticles as an efficient and heterogeneous reusable nanocatalyst for the synthesis of diaryl ethers

In this work boehmite nanoparticles (BNPs) were prepared through addition of aqueous solution of NaOH to solution of Al(NO₃)₃·9H₂O. Then, the surface of BNPs was modified by (3-chloropropyl)trimethoxysilane (CPTMS) and further tetradentate ligand (MP-bis(AMP)) was anchored on its surface. At final step, a tetradentate organometallic complex of copper was stabilized on the surface of modified BNPs (Cu(II)-MP-bis(AMP)@boehmite). These obtained nanoparticles were characterized using SEM imaging, WDX, EDS, AAS and TGA analysis, BET method, FT-IR spectroscopy, and XRD pattern. In continue, the catalytic activity of Cu(II)-MP-bis(AMP)@boehmite has been used as a much efficient, reusable and hybrid of organic-inorganic nanocatalyst in the synthesis of ether derivatives through C-O coupling reaction under palladium-free and phosphine-free conditions. Cu(II)-MP-bis(AMP)@boehmite catalyst has been recovered and reused again for several times in the synthesis of ether derivatives.

Template synthesis, DNA binding, antimicrobial activity, Hirshfeld surface analysis, and 1D helical supramolecular structure of a novel binuclear copper(ii) Schiff base complex

A new binuclear copper(ii) Schiff base complex [Cu2 L2 - (NO3)2]·2CH3OH (1) [L = 2,6-bis((E)-(p-tolylimino)methyl)-4-methoxyphenol] was synthesized using a template method in which the tridentate N2O Schiff base ligand was derived from [1 + 2] condensation of 2,6-diformyl-4-methoxyphenol and p-methyl aniline in the presence of copper(ii) ions as the template agent. The X-ray diffraction analyses revealed that this complex crystallizes in the monoclinic system with space group P21/n. The most remarkable structural feature of 1 is that it contains two types of 1D right-handed helical chains. The molecules are linked by intermolecular hydrogen bonds and π⋯π interactions, then a 3D supramolecular network was constructed. Moreover, the intermolecular interactions on the crystal packing of 1 have been further studied using Hirshfeld surface analysis and corresponding 2D fingerprint plots. Binding interaction of this complex with calf thymus DNA (CT-DNA) has been investigated using absorption and emission studies, viscosity experiments and circular dichroism studies. Complex 1 shows significant binding to the DNA. The results of fluorescence spectroscopy and UV absorption spectroscopy, CD spectroscopy and viscosity indicated that this complex interacted with CT-DNA in a groove binding mode where the binding constant was 1.3 ± 0.2 × 104 L mol-1. Our fluorimeteric study showed that the reaction between 1 and CT-DNA was exothermic (ΔH = 59.6 kJ mol-1; ΔS = 268.79 J mol-1 K-1). Antibacterial activities of the complex were screened by the disc diffusion method against three Gram-positive bacteria (Staphylococcus aureus ATCC 25923, Enterococcus faecalis ATCC 23212 and S. epidermidis ATCC 34384), and three Gram-negative bacteria (Escherichia coli ATCC 25922, Pseudomonas aeruginosa ATCC 27853 and Klebsiella pneumonia ATCC 70063). The results indicated that this complex demonstrated acceptable antibacterial activities.

Stabilization of ruthenium on biochar-nickel magnetic nanoparticles as a heterogeneous, practical, selective, and reusable nanocatalyst for the Suzuki C-C coupling reaction in water

Waste recycling and the use of recyclable and available catalysts are important principles in green chemistry in science and industrial research. Therefore in this study, biochar nanoparticles were prepared from biomass pyrolysis. Then, they were magnetized with nickel nanoparticles to improve their recycling. Further, the magnetic biochar nanoparticles (biochar-Ni MNPs) were modified by dithizone ligand and then applied for the fabrication of a ruthenium catalyst (Ru-dithizone@biochar-Ni MNPs). This nanocatalyst was characterized by high-resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), wavelength dispersive X-ray spectroscopy (WDX), N2 adsorption-desorption isotherms, thermogravimetric analysis (TGA), X-ray diffraction (XRD), and vibrating sample magnetometry (VSM) techniques. The XRD studies of Ru in the nanocatalyst showed that the crystalline structure of ruthenium in the Ru-dithizone@biochar-Ni MNPs was hcp. Another principle of green chemistry is the use of safe and inexpensive solvents, the most suitable of which is water. Therefore, the catalytic activity of this catalyst was investigated as a practical, selective, and recyclable nanocatalyst in the Suzuki carbon-carbon coupling reaction in aqueous media. The VSM curve of this catalyst showed that it could be easily recovered using an external magnet, and recycled multiple times. Also, VSM analysis of the recovered catalyst indicated the good magnetic stability of this catalyst after repeated use.

Nanomaterial catalyzed green synthesis of tetrazoles and its derivatives: a review on recent advancements

Tetrazoles are indispensable nitrogen containing heterocyclic scaffolds that offer a broad spectrum of applications in various domains such as medicinal chemistry, high energy material science, biochemistry, pharmacology etc. Owing to their useful applications, a wide range of catalysts have been explored for green synthesis of tetrazole derivatives. In recent times, nanomaterials have been emerged as extremely efficient catalysts for different organic transformations because of their high surface area-to-volume ratio, easy surface modification, simple fabrications, easy recovery and reusability. In this article, we have presented an overview of utilization of various nano-catalysts, nanocomposites and other solid-supported nanomaterials as an efficient environmental benign catalytic system for green synthesis of tetrazoles and derivatives. This review will provide an exclusive emphasis on boehmite, magnetic, copper, carbon, MCM-41, and composite based nanomaterials that have been developed since the year 2010 for the synthesis of tetrazole derivatives. In addition, we have briefly discussed the fabrication, functionalization and characterization of some novel nanomaterials and their advantages in the synthesis of tetrazole and its derivatives along with the reaction mechanism that involves synthesis of tetrazole derivatives via nanomaterials catalysed reactions.

Magnetization of graphene oxide nanosheets using nickel magnetic nanoparticles as a novel support for the fabrication of copper as a practical, selective, and reusable nanocatalyst in C-C and C-O coupling reactions

Catalyst species are an important class of materials in chemistry, industry, medicine, and biotechnology. Moreover, waste recycling is an important process in green chemistry and is economically efficient. Herein, magnetic graphene oxide was synthesized using nickel magnetic nanoparticles and further applied as a novel support for the fabrication of a copper catalyst. The catalytic activity of supported copper on magnetic graphene oxide (Cu–ninhydrin@GO–Ni MNPs) was investigated as a selective, practical, and reusable nanocatalyst in the synthesis of diaryl ethers and biphenyls. Some of the obtained products were identified by NMR spectroscopy. This nanocatalyst has been characterized by atomic absorption spectroscopy (AAS), scanning electron microscopy (SEM), wavelength dispersive X-ray spectroscopy (WDX), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FT-IR), and vibrating sample magnetometer (VSM) techniques. The results obtained from SEM shown that this catalyst has a nanosheet structure. Also, XRD and FT-IR analysis show that the structure of graphene oxide and nickel magnetic nanoparticles is stable during the modification of the nanoparticles and synthesis of the catalyst. The VSM curve of the catalyst shows that this catalyst can be recovered using an external magnet; therefore, it can be reused several times without a significant loss of its catalytic efficiency. The heterogeneity and stability of this nanocatalyst during organic reactions was confirmed by the hot filtration test and AAS technique.

Catalytic activity of supported copper on magnetic graphene oxide was investigated as a selective and reusable nanocatalyst in the synthesis of diaryl ethers and biphenyls.

Two Schiff-base Complexes of Copper and Zirconium Oxide Fabricated on Magnetic Nanoparticles as Practical and Recyclable Catalysts in C-C Coupling Reaction

:

Fe3O4 magnetic nanoparticles (MNPs) were prepared via a chemical co-precipitation method. Then, the surface of Fe3O4 MNPs was modified by (3-Chloropropyl)trimethoxysilane and then two Schiff-base complexes of zirconium oxide and copper were stabilized on modified Fe3O4 MNPs. These catalysts were characterized using SEM, EDS, WDX, FTIR, XRD, TGA, VSM and AAS techniques. The catalytic activity of these catalysts was described in the carbon-carbon coupling reaction. VSM analysis of these catalysts indicate the high magnetic performance, therefor these catalysts can be recovered by an external magnet and reused for several times without missing in the amount of catalysts. Reusability, excellent yields and high TON values indicate the high efficiency of these catalysts. Leaching of these catalysts was studied by AAS which leaching of copper or zirconium was not observed. Also, the stability of these catalysts was confirmed by characterization of recovered catalysts and comparing with fresh catalysts.

l-Methionine–Pd complex supported on hercynite as a highly efficient and reusable nanocatalyst for C–C cross-coupling reactions

An l-methionine–Pd complex was covalently immobilized on the surface of hercynite (FeAl₂O₄) MNPs, and its catalytic properties were studied in C–C coupling reactions.