A robust UV-visible light-driven SBA-15-PS/phthalhydrazide nanohybrid material with enhanced photocatalytic activity in the photodegradation of methyl orange

Solar light driven degradation of textile dye contaminants for wastewater treatment - studies of novel polycationic selenide photocatalyst and process optimization by response surface methodology desirability factor

The unplanned anthropogenic activities and raced industrial revolution detrimentally causes serious threat to terrestrial and aquatic life. A high discharge of wastewater from industries using dyes affects living organisms and the environment. This paper presents studies on polycationic selenides (PCS) synthesized by hydrothermal methods for photocatalytic degradation of dyes. The synthesized PCS were confirmed by various characterization techniques such as FTIR, SEM, EDX, UV/Vis, and XRD. The FTIR spectra revealed characteristic band at 843, 548 cm^-1, and 417 cm^-1 due to the M - Se stretching and intrinsic stretching vibrations, respectively. The optical bandgap of polycationic selenide lies in the visible light region (2.36 eV). The SEM images showed that PCS has a spherical shape with an average crystallite size of 29.23 nm calculated from XRD data using Scherer's equation. The PCS has a point of zero charge (PZC) at pH 7. The efficiency of synthesized PCS photocatalyst was confirmed in terms of its activity towards Eosin (EY) and Crystal violet (CV) dyes mineralization. The photocatalytic degradation for EY and CV dyes at optimum conditions was 99.47% and 99.31% and followed second order reactions kinetics with 1.4314 and 0.551 rate constant, respectively. The polynomial quadratic model is the best-fitted response surface methodology (RSM) model having a maximum desirability factors value and significant terms, with R² (0.9994) and adj R² values (1.0).

Magnetic Activated Carbon from ZnCl2 and FeCl3 Coactivation of Lotus Seedpod: One-Pot Preparation, Characterization, and Catalytic Activity towards Robust Degradation of Acid Orange 10

Lotus seedpods (LSPs) are an abundant and underutilized agricultural residue discarded from lotus seed production. In this study, ZnCl₂ and FeCl₃ coactivation of LSP for one-pot preparation of magnetic activated carbon (MAC) was explored for the first time. X-ray diffraction (XRD) results showed that Fe₃O₄, Fe⁰, and ZnO crystals were formed in the LSP-derived carbon matrix. Notably, transmission electron microscopy (TEM) images showed that the shapes of these components consisted of not only nanoparticles but also nanowires. Fe and Zn contents in MAC determined by atomic absorption spectroscopy (AAS) were 6.89 and 3.94 wt%, respectively. Moreover, S_BET and V_total of MAC prepared by coactivation with ZnCl₂ and FeCl₃ were 1080 m²/g and 0.51 cm³/g, which were much higher than those prepared by single activation with FeCl₃ (274 m²/g and 0.14 cm³/g) or ZnCl₂ (369 m²/g and 0.21 cm³/g). MAC was subsequently applied as an oxidation catalyst for Fenton-like degradation of acid orange 10 (AO10). As a result, 0.20 g/L MAC could partially remove AO10 (100 ppm) with an adsorption capacity of 78.4 mg/g at pH 3.0. When 350 ppm H₂O₂ was further added, AO10 was decolorized rapidly, nearly complete within 30 min, and 66% of the COD was removed in 120 min. The potent catalytic performance of MAC might come from the synergistic effect of Fe⁰ and Fe₃O₄ nanocrystals in the porous carbon support. MAC also demonstrated effective stability and reusability after five consecutive cycles, when total AO10 removal at 20 min of H₂O₂ addition slightly decreased from 93.9 ± 0.9% to 86.3 ± 0.8% and minimal iron leaching of 1.14 to 1.19 mg/L was detected. Interestingly, the MAC catalyst with a saturation magnetization of 3.6 emu/g was easily separated from the treated mixture for the next cycle. Overall, these findings demonstrate that magnetic activated carbon prepared from ZnCl₂ and FeCl₃ coactivation of lotus seedpod waste can be a low-cost catalyst for rapid degradation of acid orange 10.

Preparation and characterization of single perovskite microplates and its sunlight assisted photodecolorization activity, validated by response surface methodology

Perovskites overtaking simple metal oxides as solar light harvesting material due to their excellent photocatalytic efficiency and superior stability. An efficient visible light responsive, K₂Ba_0.3Cu_0.7O₃ single perovskites oxides (SPOs) photocatalyst was fabricated by a facile hydrothermal method. The fabricated SPOs was characterized by various techniques. SEM analysis confirm the cubic morphology of SPOs, the average length and diameter of SPOs were 27.84 and 10.06 μm calculated from SEM images. FT-IR analysis confirmed the presence of M-M and M - O bonds. EDX showed prominent peaks of the constituent elements. The average crystallite size of SPOs calculated by Scherrer and Williamson-Hall equation was 14.08 and 18.47 nm respectively. The optical band gap value lies in visible region of spectrum (2.0 eV) determined from the Tauce's plot. The fabricated SPOs was applied for photocatalytic degradation of methylene blue (MB) dye. Maximum degradation 98.09% of MB was achieved at 40 min irradiation time, 0.01 g catalyst dose, 60 mg L^-1 MB concentration and pH 9. The photocatalytic degradation of MB follows first order kinetic. RSM modeling of MB removal was also caried out. Reduce quadratic model was best fitted model having F-value = 300.65, P-value = < 0.0001,R² = 0.9897, predicted R² = 0.9850 and adjusted R² = 0.9864.

Comparative robustness and sustainability of in-situ prepared antimony nanoarchitectonics in chitosan/synthesized carboxymethyl chitosan in environmental remediation perspective

Due to the rapid race of industrialization natural assets like fresh water has been deteriorated causing lethal effects in living organisms. In the current study robust and sustainable composite of in-situ antimony nanoarchitectonics in chitosan/synthesized carboxymethyl chitosan matrix were synthesized. To improve solubility, metal adsorption and water decontamination, chitosan was modified into carboxymethyl chitosan and the modification was confirmed through various characterization techniques. The characteristic bands in the FTIR spectrum confirm substitution of carboxymethyl group in the chitosan. This was further illustrated that the characteristic proton peaks of CMCh observed at δ = 4.097 to 4.192 ppm, suggesting O-carboxy methylation of chitosan by ¹H NMR. The second order derivative of potentiometric analysis confirmed 0.83 degree of substitution. The antimony (Sb) loaded modified chitosan were confirmed by FTIR and XRD analysis. The potential effectiveness of chitosan matrix was determined and compared toward reductive removal of the Rhodamine b dye. Rhodamine b mitigation is following first order kinetics with R² value of 0.9832 and 0.969 with a constant rate of 0.0977 and 0.2534 ml/min for Sb loaded chitosan and carboxymethyl chitosan respectively. The Sb/CMCh-CFP enables us to achieve 98.5 % mitigation efficiency within 10 min. The CMCh-CFP chelating substrate was found stable and efficient even after 4th batches of cycles with <4 % decrease in efficiency. The in-situ synthesized material was found tailored composite, in terms of dyes remediation, reusability and biocompatibility as compared to chitosan.

Synthesis of ternary-based visible light nano-photocatalyst for decontamination of organic dyes-loaded wastewater

The release of dyes-loaded wastewater from various industries is a major threat to human beings due to their health hazard effects. Ternary ferrites-based visible light photocatalyst Fe₂Zn_0.5Cu_0.5 O₄-CM (CZF-CM) was formed via the co-precipitation method. These prepared ternary ferrites nanoparticles Fe₂Zn_0.5Cu_0.5O₄ (CZF-NPs) and photocatalyst (CZF-CM) were analyzed using different spectroscopic techniques. The average crystallite size of CZF-NPs was calculated from XRD data using Scherer's equation and found to be 12 nm. The elemental composition of the synthesized ternary ferrites nanoparticles (CZF-NPs) was defined by the EDX images. The morphology of CZF-CM photocatalyst is spherical, having a smooth surface and average microspheres size of 810 μm based on SEM micrographs. The photocatalyst has bandgap of 2.57 eV, which lies in the visible range of the electromagnetic spectrum derived by extrapolating Tauc's plot. Photocatalyst CZF-CM showed 94% degradation efficiency for Rhodamine B (RB) dye at optimized conditions of initial dye concentration, catalyst dosage, pH and sunlight irradiation contact time as 40 ppm, 0.7 g, pH 8 and 125 min, respectively. Maximum degradation (96%) of methyl orange (MO) dye occurred at pH 6, at similar optimized conditions as the RB dye. The binary ferrites photocatalyst Fe₂CuO₄-CM (CF-CM) and Fe₂ZnO₄-CM (ZF-CM) of the selected metals showed lesser photocatalytic efficiency than ternary ferrites. An artificial neural network in addition to the response surface methodology was used for the optimization process. The artificial neural network is highly in agreement with the experimental results obtained for the selected dyes. The corresponding predicted response for each data set from ANOVA showed high R², R²_adj, and R²_pred values for the proposed model. It also indicates that contributing parameters in the model are significant due to having very high F-values and low p-values. It is concluded that the synthesized photocatalysts are considered an efficient entrant for the decolorization of industrial wastewater.

Selective photocatalytic oxidation of aromatic alcohols to aldehydes with air by magnetic WO3ZnO/Fe3O4. In situ photochemical synthesis of 2-substituted benzimidazoles

Recently, visible light-driven organic photochemical synthesis has been a pioneering field of interest from academic and industrial associations due to its unique features of green and sustainable chemistry. Herein, WO3ZnO/Fe3O4 was synthesized, characterized, and used as an efficient magnetic photocatalyst in the preparation of a range of 2-substituted benzimidazoles via the condensation of benzyl alcohol and o-phenylenediamine in ethanol at room temperature for the first time. The key feature of this work is focused on the in situ photocatalytic oxidation of benzyl alcohols to benzaldehydes under atmospheric air and in the absence of any further oxidant. This new heterogeneous nanophotocatalyst was characterized via XRD, FT-IR, VSM and SEM. Short reaction time, cost-effectiveness, broad substrate scope, easy work-up by an external magnet, and excellent product yield are the major advantages of the present methodology. A number of effective experimental parameters were also fully investigated to clear broadness and generality of the protocol.

Recent advances of SBA-15-based composites as the heterogeneous catalysts in water decontamination: A mini-review

As an emerging class of silica-based mesoporous materials with incorporation of active components (e.g., transition metals/metal oxides and nanocarbons), SBA-15-based composites (X@SBA-15) have been attracting increasing attention in the field of water treatment owing to their unique characteristics and excellent remediation performance. This paper reviews recent advances in catalytic applications of X@SBA-15 to remove organic contaminants from water. Emphasis is made on the use of X@SBA-15 in four advanced oxidation processes (AOPs) (i.e., photocatalysis, Fenton-like oxidation, catalytic ozonation, and sulfate radical-based oxidation). Impregnation and hydrothermal methods are two most widely used synthetic approaches to combine the active composites with SBA-15, obtaining a synergistic effect with significant improvement in their individual catalytic activity for pollution remediation. The enhanced generation of highly reactive hydroxyl radicals from the surface of X@SBA-15 was widely recognized as being responsible for water decontamination using these AOPs, while sulfate radicals were also involved during activation of persulfate or peroxymonosulfate. Especially, X@SBA-15 could significantly enhance the light harvest and reduce the recombination of photo-induced electrons and holes during photocatalytic treatment, which also played the critical role in oxidizing the organics. The superior catalytic performance of X@SBA-15 without leaching metal ions during successive runs demonstrated the excellent reusability and structural stability. Together with the reduced toxicity of the treated solutions and the cost-effective characteristics of X@SBA-15 nanohybrids reported in the published literature, their great potential as the efficient and environmentally friendly heterogeneous catalysts in a real use scenario is suggested. Finally, the future perspectives on the development and practical utilization of X@SBA-15 are addressed.

H3PW12O40/SBA-15 for the Solventless Synthesis of 3-Substituted Indoles

A family of silica-supported H3PW12O40 (HPW) solid acid catalysts was prepared by wet impregnation of mesoporous SBA-15 and investigated for the solventless synthesis of 3-substituted indoles under mild conditions. Mesoporous SBA-15 facilitated a high dispersion of immobilised H3PW12O40, significantly improving the catalytic efficiency of the heteropolyacid for the desired multi-component transformation. The yield of 3-substituted indoles strongly correlated with HPW loading (which spanned 3.2–51.6 wt %) and corresponding acid strength; the 51.6 wt % HPW/SBA-15 delivered 81% yield of 2-[(1H-indol-3-yl)(phenyl)methyl]malononitrile, approximately five times greater than that of the unsupported HPW, and exhibited a broad substrate scope for aromatic aldehydes.

Photocatalytic efficacy of supported tetrazine on MgZnO nanoparticles for the heterogeneous photodegradation of methylene blue and ciprofloxacin

MgZnO@SiO₂-tetrazine nanoparticles were synthesized and their photocatalytic efficiency was demonstrated in the decomposition of ciprofloxacin and methylene blue (MB). This new heterogeneous nanocatalyst was characterized by FT-IR, XRD, UV-vis, DRS, FE-SEM, ICP, and CHN. Distinctive variables including photocatalyst dose, pH, and degradation time were investigated. Up to 95% photodegradation was gained under the optimum conditions (20 mg photocatalyst, 3.5 ppm MB, pH 9) by using MgZnO@SiO₂-tetrazine nanoparticles after 20 min. An elementary kinetic study was carried out, and a pseudo-first-order kinetic with a reasonably high rate-constant (0.068 min⁻¹) was derived for the MB decay. Photoluminescence (PL) studies confirmed that the photocatalytic activity of MgZnO@SiO₂-tetrazine was almost consistent with the Taugh plots. Thus, it can be envisaged that the photocatalytic activity is closely related to the optical absorption. Furthermore, a photoreduction mechanism was suggested for the degradation process. Addition of scavengers and some mechanistic studies also revealed that O₂˙⁻ is the original radical accounting for the degradation of MB, considering this latter compound as a model type pollutant. Finally, efficacy of the present photocatalytic process was assessed in the degradation of ciprofloxacin as a model drug under the optimum reaction conditions.

MgZnO@SiO₂-tetrazine nanoparticle was synthesized and its photocatalytic efficiency was demonstrated in the decomposition of methylene blue (MB) and ciprofloxacin.