The preparation and dual-mode detection of ascorbic acid based on poly(N-isopropylacrylamide) nanogel with oxidase-like activity

Nanozymes have recently become a research hotspot because of the advantages of good stability, excellent catalytic performance and easy storage in comparison to natural enzymes. Nanozymes with oxidase-like activity get special attention because they needn't the participation of hydrogen peroxide. In this paper, poly(N-isopropylacrylamide) nanogel with oxidase-like activity was synthesized for the first time. The catalytic mechanism was explored by EPR and UV spectroscopy after adding specific trapping agents of ROS, and the results showed that PNIPAM NG can catalyze O2 to 1O2. In the presence of PNIPAM NG, o-phenylenediamine (OPD) and ascorbic acid (AA) can be oxidized to 2,3-diaminophenazine (oxOPD) and dehydroascorbic acid (DHA), and DHA can further react with OPD to produce a fluorescence substance. The colorimetric and fluorescence detection platforms for AA were constructed based on the above principles. Both platforms have satisfactory results in real samples. The fluorescence platform has better sensitivity and selectivity than the colorimetric platform.

Impact of channel nanostructures of porous carbon particles on their catalytic performance

Mesoporous carbon particles have great potential due to their unique structural properties as support materials for catalytic applications. Particle shapes and channel nanostructures of mesoporous carbon particles can determine the reactant/product transport efficiency. However, the role of the channel nanostructure in the catalytic reaction has not been much explored. Herein, we introduce a facile method to fabricate a series of porous carbon particles (PCPs) with controlled channel exposure on the carbon surface and investigate the impact of the channel nanostructure of the PCPs on the catalytic activity. By employing a membrane emulsification method with a controlled solvent evaporation rate, we fabricate block copolymer (BCP) particles with uniform size and regulated degrees of cylindrical channel exposed to the particle surface. Followed by the carbonization of the BCP particles, a low amount (1.3 wt%) of Pt is incorporated into the PCP series to investigate the impact of channel nanostructures on the catalytic oxidation reaction of o-phenylenediamine (OPD). Specifically, PCP featuring highly open channel nanostructures shows a high reaction rate constant of 0.154 mM-1 s-1 for OPD oxidation, showing 5.5 times higher catalytic activity than those of closed channel nanostructures (0.028 mM-1 s-1). This study provides a deeper understanding of the impact of channel nanostructure within mesoporous carbon particles on catalytic activity.

Peroxidase-Like Activity of Magnetic Nanoparticles in the Presence of Blood Proteins

The generation of hydroxyl radicals from hydrogen peroxide in aqueous solutions containing magnetic nanoparticles (MNPs), hemoglobin (Hb), immunoglobulin G (IgG), and human serum albumin (HSA) was determined. The dependence of the rate of formation of the oxidized product of o-phenylenediamine (o-PDA) on the concentration of MNPs in solution, as well as on the concentration of proteins, was obtained. The peroxidase-like activity of MNPs was shown to decrease in the presence of HSA and IgG, while the addition of Hb to the reaction mixture led to its decrease and increase depending on protein concentration. The obtained effects can be used in the engineering of systems based on MNPs for theranostics (in particular, for suppression of tumor growth) and in predicting the ability of particles to catalyze the generation of reactive oxygen species (ROS) in vivo.

Peroxidase-like oxidative activity of cobalt-based 1D coordination polymer; experimental and theoretical investigations

CONTEXT

The present work describes the synthesis, structural characterization, and catalytic activity of a Co(II)-based one-dimensional coordination polymer (CP1). To validate the chemotherapeutic potential of CP1, in vitro DNA binding assessment was carried out by employing multispectroscopic techniques. Moreover, the catalytic activity of CP1 was also ascertained during the oxidative conversion of o-phenylenediamine (OPD) to diaminophenazine (DAP) under aerobic conditions.

METHODS

The molecular structure of CP1 was solved with the olex2.solve structure solution program using charge flipping and refined with the olex2.refine refinement package by using Gauss-Newton minimization. The DFT studies were performed by utilizing ORCA Program Version 4.1.1 to calculate the electronic and chemical properties of CP1 by calculating the HOMO-LUMO energy gap. All calculations were carried out at B3LYP hybrid functional using def2-TZVP as the basis set. Contour plots of various FMOs were visualized by using Avogadro software. Hirshfeld surface analysis was carried out by Crystal explorer Program 17.5.27 to examine the various non-covalent interactions which are crucial for the stability of crystal lattice. In addition, molecular docking studies of CP1 with DNA were performed by using AutoDock Vina software and AutoDock tools (version 1.5.6). Discovery studio 3.5 Client 2020 was used for visualization of the docked pose and binding interactions of CP1 with ct-DNA.

Metal Ion-Peptide-Intermediated Ligand Transfer for Serum Detection of the Omicron Variant of SARS-Cov-2 in Echinococcosis Patients

A method is developed to electrochemically induce target-specific covalent capturing of the spike protein of SARS-Cov-2, forming a covalent peptide-protein complex fit for working with such complicated clinical samples. Specifically, peptide-coordinated copper ions can be electrochemically controlled to induce cross-linkage between certain amino acids on the peptide probe and the target protein. Therefore, target specificity can be tuned electrochemically, realizing highly specific targeting of the omicron S protein or broader specificity toward all variants of the virus. Using this method, with electrochemically catalyzed generation of signal-enhancing molecules, the sensitivity and covalent detection allow their application in both serum and fecal samples. These results may point to their possible use in screening new variants of the virus in the near future.

Peroxidase-like activity of biosynthesized silver nanoparticles for colorimetric detection of cysteine

Cysteine is one of the important amino acids that is involved in various physiological processes, food industries, pharmaceuticals, and personal care. It also serves as a biomarker for some diseases. The large use of cysteine necessitates rapid, cheap, and accurate determination of cysteine in a range of samples. Although many techniques have been employed for the detection of cysteine, they suffer from limitations that make them unsuitable for routine analysis. Here we report on a cheap colorimetric method using biosynthesized silver nanoparticles (AgNPs) as nanozymes. The AgNPs were characterized by UV/visible spectrophotometry, scanning electron microscopy (SEM), and surface-enhanced Raman spectroscopy (SERS). The AgNPs exhibit peroxidase-like activity using o-phenylenediamine (OPD) as a chromogenic reagent. The low K_m values observed for OPD and H₂O₂ (0.9133 and 61.56 mM respectively) show strong affinity of the substrates to AgNPs. The peroxidase-like activity of AgNPs, however, was inhibited on the addition of cysteine. The results show that the absorption intensity of the oxidized OPD decreased linearly with the concentration of cysteine in the range of 0.5-20 μM. The limit of detection (LOD) in this linear range was found to be as low as 90.4 nM. The recovery from urine sample (spiked with cysteine) analyses demonstrated the feasibility of the method in real sample application. From our findings, we anticipate that our method can be applied for the analysis of cysteine in various samples.

Iodide-Mediated Etching of Gold Nanostar for the Multicolor Visual Detection of Hydrogen Peroxide

A multicolor visual method for the detection of hydrogen peroxide (H₂O₂) was reported based on the iodide-mediated surface etching of gold nanostar (AuNS). First, AuNS was prepared by a seed-mediated method in a HEPES buffer. AuNS shows two different LSPR absorbance bands at 736 nm and 550 nm, respectively. Multicolor was generated by iodide-mediated surface etching of AuNS in the presence of H₂O₂. Under the optimized conditions, the absorption peak Δλ had a good linear relationship with the concentration of H₂O₂ with a linear range from 0.67~66.67 μmol L^-1, and the detection limit is 0.44 μmol L^-1. It can be used to detect residual H₂O₂ in tap water samples. This method offered a promising visual method for point-of-care testing of H₂O₂-related biomarkers.

An origami-based colorimetric sensor for detection of hydrogen peroxide and glucose using sericin capped silver nanoparticles

The hydrogen peroxide (H₂O₂) measurement is considered highly important in industrial wastewater quality assessment, environmental protection, and disease detection. Here, a simple high-performance paper-based sensor is proposed for rapid and in situ detection of H₂O₂. To this end, 3,3',5,5'-tetramethylbenzidine is embedded in the sensor to act as a color indicator, whose reaction with hydrogen peroxide is catalyzed by a silver nanozyme modified by sericin. The result of the reaction clarified by the appearance of blue color in the sensor detection zone is received by a portable scanner, while also calculating its intensity by image analysis software. This method is sensitive to hydrogen peroxide in the concentration range of 0.5‒240 mg/dL, providing a detection limit of 0.15 mg/dL. The ability of the sensor to determine glucose is also evaluated by adding a layer containing glucose oxidase enzyme to the sensor structure. A desirable response is obtained in the range of 1.0‒160 mg/dL, together with a detection limit of 0.37 mg/dL. Accordingly, the proposed sensor shows satisfactory results compared to clinical methods for monitoring the amount of glucose in biological samples such as serum and saliva.

New bis[MoO2] and [MoO(O2)] compounds: An artificial enzyme with peroxidase activity against o-phenylenediamine and dopamine

In this study, two binuclear dioxido- and oxidoperoxido molybdenum (VI) complexes, [{Mo^VIO₂}₂(L)(H₂O)₂] 1 and [{Mo^VIO(O₂)}₂(L)(H₂O)₂] 2, were synthesized. Complex 1 was obtained through a 1:2 reaction of ligand I with MoO₂(acac)₂, while complex 2 was synthesized in situ by reacting MoO₃ with H₂O₂ in a 1:2 ratio. The structures and characteristics of the complexes were examined employing several techniques such as elemental (CHN) analysis, spectroscopy (FT-IR, UV-Vis, ¹H, and ¹³CNMR), and thermal study (TGA). SC-XRD analysis of complex 1a revealed that the molybdenum central atom adopts an octahedral geometry and is bonded to phenolic oxygen, enolate oxygen, and azomethine nitrogen atoms. Powder X-ray diffraction was used to determine the purity of the bulk material, and the results were compared to single crystal data. Computational calculations were performed using density functional theory (DFT) at the B3LYP/6-31G(d, p) level of theory for the ligand and the LANL2DZ level of theory for the complexes, yielding geometry optimized structures that were then employed in frequency and NMR-calculations. These theoretical findings were compared to the experimental results and showed a good correlation. Furthermore, the complexes exhibited peroxidase-like activity in the presence of hydrogen peroxide as evidenced by the oxidation of o-phenylenediamine and dopamine.

Albumin-Functionalized Iron Oxide Nanoparticles for Theranostics: Engineering and Long-Term In Situ Imaging

Magnetic nanosystems (MNSs) consisting of magnetic iron oxide nanoparticles (IONPs) coated by human serum albumin (HSA), commonly used as a component of hybrid nanosystems for theranostics, were engineered and characterized. The HSA coating was obtained by means of adsorption and free radical modification of the protein molecules on the surface of IONPs exhibiting peroxidase-like activity. The generation of hydroxyl radicals in the reaction of IONPs with hydrogen peroxide was proven by the spin trap technique. The methods of dynamic light scattering (DLS) and electron magnetic resonance (EMR) were applied to confirm the stability of the coatings formed on the surface of the IONPs. The synthesized MNSs (d ~35 nm by DLS) were intraarterially administered in tumors implanted to rats in the dose range from 20 to 60 μg per animal and studied in vivo as a contrasting agent for computed tomography. The long-term (within 14 days of the experiment) presence of the MNSs in the tumor vascular bed was detected without immediate or delayed adverse reactions and significant systemic toxic effects during the observation period. The peroxidase-like activity of MNSs was proven by the colorimetric test with o-phenylenediamine (OPD) as a substrate. The potential of the synthesized MNSs to be used for theranostics, particularly, in oncology, was discussed.

NaCl Micro-Crystal as a Molecular Mold for Enhanced Synthesis of Planar Phenazines and Their Applications on Chemosensing and a Full-Color Fluorescent Material

NaCl has been successfully used as a template for the synthesis of 2D nanomaterials, but it is seldom used for the construction of flat small organic molecules. Herein, a simple, low-cost, and highly efficient synthesis of phenazines with planar main frames, such as 5-phenyl-5,14-dihydro-5,7,12,14-tetraazapentacene, in the presence of NaCl micro-crystal as a kind of molecular mold is described. The reactants were mixed with NaCl powder and heated to 320 °C for 5 min. Yields >90% were readily achieved after a simple precipitation in water. The effectiveness of NaCl crystal as a mold with HCl was confirmed by comparison with common inorganic salts, SiO₂, and γ-Al₂O₃ with HCl together with combinations including NaNO₃ + HNO₃, Na₂SO₄ + H₂SO₄, NaH₂PO₄ + H₃PO₄, and NaH₂PO₄ + polyphosphoric acid. The mechanism was deduced with the aid of computer simulation, which confirms the stabilization of 5,14-dihydro-5,7,12,14-tetraazapentacene by the NaCl surface. DMSO solution of a product, 1,3-dihydro-imidazo[4,5-b]phenazin-2-one, showed enhanced fluorescence in H₂O, and it was used as a fluorescent probe for pH and Hg²⁺. A full-color material was prepared by mixing precursors of epoxy resin and phenazines, and its fluorescent color could be adjusted by the ratio of phenazines.

Recent Trends in Composite Nanozymes and Their Pro-Oxidative Role in Therapeutics

Nanozymes are inorganic nanostructures whose enzyme mimic activities are increasingly explored in disease treatment, taking inspiration from natural enzymes. The catalytic ability of nanozymes to generate reactive oxygen species can be used for designing effective antimicrobials and antitumor therapeutics. In this context, composite nanozymes are advantageous, particularly because they integrate the properties of various nanomaterials to offer a single multifunctional platform combining photodynamic therapy (PDT), photothermal therapy (PTT), and chemodynamic therapy (CDT). Hence, recent years have witnessed great progress in engineering composite nanozymes for enhanced pro-oxidative activity that can be utilized in therapeutics. Therefore, the present review traverses over the newer strategies to design composite nanozymes as pro-oxidative therapeutics. It provides recent trends in the use of composite nanozymes as antibacterial, antibiofilm, and antitumor agents. This review also analyzes various challenges yet to be overcome by pro-oxidative composite nanozymes before being used in the field.

Fabrication of magnetic CuFe2O4@PBC composite and efficient removal of metronidazole by the photo-Fenton process in a wide pH range

CuFe₂O₄-coated pretreated biochars (CuFe₂O₄@PBC) were synthesized for the first time via a facile method by impregnating and calcinating Cu-Fe-ethanol solution to activate H₂O₂ for the degradation of metronidazole (MNZ) at a wide pH range. CuFe₂O₄@PBC samples were characterized by XRD, SEM, VSM, XPS, and BET. The results showed that CuFe₂O₄ coating, which is evenly distributed on the surface of HNO₃-pretreated biochar, can provide more active sites to enable CuFe₂O₄@PBC to be activated by visible light. The introduction of biochar by impregnating and calcinating method effectively suppressed the aggregation of CuFe₂O₄ and maintained its high surface area and pore structure. CuFe₂O₄@PBC composite can be separated easily by an external magnetic field. The PBC-400CuFe sample calcined under 400 °C showed superior photo-Fenton catalytic ability in MNZ degradation at a wide pH range (pH = 3-7) and exhibited high-efficiency degradation of about 96.3% with the dosage concentration of catalyst 0.4 g/L in the presence of H₂O₂ at pH 3.0 within 60 min. While, at pH 7.0, the PBC-400CuFe material removed 91.1% MNZ within 120 min, and the degradation efficiency was still higher than that of traditional Fenton reaction and some Fenton-like reaction. The PBC-400CuFe showed good stability. After 5 times of repeated use, its removal rate was still above 89.1%. This study confirmed that O₂•^- and h⁺ are both important radicals, but the •OH played a key role in the visible photo/CuFe₂O₄@PBC- H₂O₂ system. The results indicate that CuFe₂O₄@PBC is highly suitable for the wastewaters with high MNZ content under mild conditions.

Molybdenum Selenide/Porous Carbon Nanomaterial Heterostructures with Remarkably Enhanced Light-Boosting Peroxidase-like Activities

Nanozymes have emerged as a fascinating nanomaterial with enzyme-like characteristics for addressing the limitations of natural enzymes. Nevertheless, how to improve the relatively low catalytic activity still remains challenging. Herein, a facile recrystallizing salt template-assisted chemical vapor deposition method was utilized to synthesize MoSe₂/PCN heterostructures. This heterostructure displays remarkably enhanced light boosting peroxidase-like activities. Notably, the maximal reaction velocity of this heterostructure attains 17.81 and 86.89 μM min^-1 [for o-phenylenediamine (OPD) and 3,3'5,5'-tetramethylbenzidine (TMB), respectively]. Moreover, various characterization means were performed to explore the mechanism deeply. It is worth mentioning that the photoinduced electrons generated by the heterostructure directly react with H₂O₂ to yield plentiful ^•OH for the effective oxidation of OPD and TMB. Therefore, this work offers a promising approach for improving peroxidase-like activity by light stimulation and actuating the development of enzyme-based applications.

Dual-signal uric acid sensing based on carbon quantum dots and o-phenylenediamine

Fluorescent carbon quantum dots (CQDs), which showed excitation-dependent emission characteristics, were prepared using a facile hydrothermal method. The structure and optical properties of CQDs were characterized by transmission electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, UV-Vis spectroscopy, and fluorescence spectroscopy. These CQDs also showed peroxidase-like activity and could catalyze the H₂O₂-mediated oxidation of o-phenylenediamine (OPD) to form 2,3-diaminophenazine (DAP) with an absorption peak at 420 nm. DAP exhibited an obvious fluorescence emission at 550 nm under the excitation of 360 nm. On the other hand, it decreased the fluorescence of CQDs at 450 nm via inner filter effect. The experimental results indicated that the H₂O₂ concentration affected the color of DAP and the fluorescence intensity of CQDs and DAP. Thus, a colorimetric and ratiometric fluorescence dual-signal method was established for measuring the concentrations of H₂O₂ and uric acid (UA). The effects of pH, incubation temperature, incubation time, and OPD concentration on the response were investigated. Under the conditions of pH 7.5, temperature 50 °C, incubation time 30 min, and OPD 1.5 mM, the absorbance and fluorescence intensity ratio responses were linearly dependent on UA concentration ranging from 5.0 μM to 100 μM. The limits of detection were 0.7 and 0.5 μM with a colorimetric method and ratiometric fluorescence method, respectively. More importantly, this dual responsive method has been applied to the determination of UA in urine samples with satisfactory results.

Magnetic nanomaterials with unique nanozymes-like characteristics for colorimetric sensors: A review

Colorimetric sensors for the rapid detection of numerous analytes have been widely applied in many fields such as biomedicine, food industry and environmental science due to their highly sensitive and selective response, easy operation and visual identification by naked eyes. In this review, the recent progress of the colorimetric sensors based on the magnetic nanomaterials with unique nanozymes-like catalytic activity (magnetic nanozyme) and their colorimetric sensing applications are presented. Emerging magnetic nanozyme-based colorimetric sensors, such as metal oxide/sulfides-based, metal-based, carbon-based, and aptamer-conjugated magnetic nanomaterials, offer many desirable features for target analytes detection. And due to the unique nanoscale physical-chemical properties, magnetic nanozymes have been used to mimic the catalytic activity of natural enzymes such as peroxidases, oxidases and catalases. This review also highlights the catalytic mechanisms of enzyme-like reactions, and promising colorimetric sensing system for the detection of chemical compounds like H₂O₂, pesticide, ascorbic acid, dopamine, tetracyclines, perfluorooctane sulfonate, phenolic compounds, heavy metal ion and sulfite have been deeply discussed. In addition, the remaining challenges and future directions in utilizing magnetic nanozyme for colorimetric sensors are addressed.

“Click” dendrimer-Pd nanoparticle assemblies as enzyme mimics: catalytic o-phenylenediamine oxidation and application in colorimetric H2O2 detection

“Click” dendrimer-Pd NPs as peroxidase enzyme mimics of H₂O₂ sensing using o-phenylenediamine oxidation by H₂O₂ to 2,3-diaminophenazine.

Recyclable Magnetic Cu/CuFe2O4 Nanocomposites for the Rapid Degradation of 4-NP

Magnetic Cu/CuFe2O4 nanocomposites were prepared by the one-pot thermal decomposition of acetylacetone compounds. Adjusting the molar ratios of Fe to Cu was used to control the content of Cu in the synthetic process. XRD, TEM, XPS and UV-Vis were employed to reveal detailed structural and catalytic activities of Cu/CuFe2O4 nanocomposites. Magnetic measurements demonstrated that Cu/CuFe2O4 nanocomposites possessed a considerable magnetic saturation. Cu/CuFe2O4 nanocomposites showed superb efficiency in the degradation of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP). 4-NP could be reduced by Cu/CuFe2O4 nanocomposites within 40 s in the attendance of NaBH4. Cu nanocrystals played an indispensable rose in the enhancement of catalytic performance. The synergistic effect of Cu and CuFe2O4 nanocrystals achieved the high-efficiency catalytic reduction for 4-NP. After six recycling experiments, the efficiency of Cu/CuFe2O4 nanocomposites was almost stable. Our work advances a straightforward strategy to synthesize efficient and recoverable Cu/CuFe2O4 nanocomposites, which has promising utilizations in the purifying of nitrophenolic contamination.

Bimetallic CuCo2 S4 Nanozymes with Enhanced Peroxidase Activity at Neutral pH for Combating Burn Infections

Peroxidase-mimicking nanozymes that can generate toxic hydroxyl radicals (^. OH) hold great promise as antibacterial alternatives. However, most of them display optimal performance under strongly acidic conditions (pH 3-4), and are thus not feasible for many medical uses, including burn infections with a wound pH close to neutral. Herein, we report a copper-based nanozyme (CuCo₂ S₄ ) that exhibits intrinsic peroxidase-like activity and can convert H₂ O₂ into ^. OH at neutral pH. In particular, bimetallic CuCo₂ S₄ nanoparticles (NPs) exhibited enhanced peroxidase-like activity and antibacterial capacity, superior to that of the corresponding monometallic CuS and CoS NPs. The CuCo₂ S₄ nanozymes possessed excellent ability to kill various bacteria, including methicillin-resistant Staphylococcus aureus (MRSA). Furthermore, this CuCo₂ S₄ nanozymes could effectively disrupt MRSA biofilms in vitro and accelerate MRSA-infected burn healing in vivo. This work provides a new peroxidase mimic to combat bacteria in neutral pH milieu and this CuCo₂ S₄ nanozyme could be a promising antibacterial agent for the treatment of burn infections.

Biosynthesis of NiFe2 O4 @Ag Nanocomposite and Assessment of Its Effect on Expression of norA Gene in Staphylococcus aureus

Activity of norA efflux pump has been known as a resistance mechanism to antibiotics like ciprofloxacin in Staphylococcus aureus. This study was carried out to assess the effect of biosynthesized NiFe₂ O₄ @Ag nanocomposite on expression of norA gene in Staphylococcus aureus. In this experimental study, 30 clinical samples were collected from patients hospitalized at different hospitals in Guilan Province, Iran. Then, clinical isolates of S. aureus were identified by standard microbiological tests. Antimicrobial susceptibility tests of clinical and standard strains of S. aureus were done by disk diffusion method according to CLSI guideline. Fourier transform infrared spectroscopy (FT-IR) was used to analyze the various functional groups present in the biosynthesized NiFe₂ O₄ @Ag nanocomposite. This analysis confirmed the formation of alga proteins coated on magnetite nanocomposite. X-ray diffraction (XRD) verified the crystalline structure of NiFe₂ O₄ @Ag and the deposition of silver on the surface of NiFe₂ O₄ . Energy dispersive X-ray mapping (EDX-map) analysis confirmed the existence of Ag, Ni, Fe and O in the final product. Scanning electron microscopy (SEM) confirmed that the nanocomposites were spherical in shape and Transmission electron microscopy (TEM) results revealed that the NiFe₂ O₄ @Ag had the particle size about 100 nm. Antibacterial activity of NiFe₂ O₄ @Ag alone and combined with ciprofloxacin was evaluated using the disk assay method, and minimum inhibitory concentration (MIC) by broth dilution method. Afterwards, the expression of norA efflux pump gene with and without of NiFe₂ O₄ @Ag nanocomposite and ciprofloxacin was evaluated by Real-Time PCR. Real-Time PCR results demonstrated that the expression of norA gene in the strains exposed to both NiFe₂ O₄ @Ag nanocomposite (1/4 MIC) and ciprofloxacin (1/8 MIC) significantly reduced in comparison to untreated strains. This study reveals that, when NiFe₂ O₄ @Ag nanocomposite is combined with ciprofloxacin, the inhibitory effect of ciprofloxacin increases against growth of S. aureus. Therefore, NiFe₂ O₄ @Ag nanocomposite can be considered as an effective factor to decrease the growth of S. aureus along with ciprofloxacin.

Development of a cysteine sensor based on the peroxidase-like activity of AgNPs@ Fe3O4 core-shell nanostructures

In this study, a facile one step solvo-thermal procedure has been employed in generating magnetite-silver core-shell nanocomposites (AgNPs@ Fe₃O₄) with superior peroxidase-like catalytic property than bare magnetic nanoparticles (Fe₃O₄). The composites were characterized using different techniques such as transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD), and surface-enhanced infrared absorption spectroscopy (SEIRA). In the presence of hydrogen peroxide, the synthesized composites were able to oxidize the colorless o-phenylenediamine (OPD) to a yellow colour 2, 3-diaminophenazine (DAP) with a better peroxidase-like activity than Fe₃O₄ alone. The obtained K_m value of AgNPs@ Fe₃O₄ with H₂O₂ and OPD substrates are 28.0 mM and 2.91 mM respectively. These are substantially lower than previously reported values and indicate the strong binding affinity of the substrates towards AgNPs@ Fe₃O₄ nanocomposites. Based on the obstruction activity of cysteine on the peroxidase-like catalytic property of the nanocomposites, a sensor was developed for detection of cystein with a limit of detection as low as 87 nM and a wider range of linearity. The sensor also exhibited excellent selectivity against potentially interfering molecules.

Synthesis of a new Ni complex supported on CoFe2O4 and its application as an efficient and green catalyst for the synthesis of bis(pyrazolyl)methane and polyhydroquinoline derivatives

A novel and magnetic nanocatalyst was synthesized for the synthesis of multicomponent compounds.

Highly efficient removal of surfactant from industrial effluents using flaxseed mucilage in coagulation/photo-Fenton oxidation process

In this study, flaxseed mucilage (FSM) has been used as a green coagulant in the pretreatment stage of a combined process for the removal of an anionic surfactant, sodium dodecyl sulfate (SDS). In the post-treatment stage, heterogeneous photo-Fenton-like oxidation using MnFe₂O₄ nanocatalyst was applied to remove the remained SDS. Using response surface methodological approach, optimum condition in the coagulation process was obtained at pH 7.0, FSM dose of 100 mg L^-1 and 30 min. In the photo-Fenton oxidation process, complete SDS removal was achieved using 76 mg of the nanocatalyst, 1.07 mL of H₂O₂ at 17 min. Application of the combined process on the real wastewater samples indicates that the proposed method can be used effectively for the treatment of industrial effluents containing surfactants.

Enzyme mimetic activities of spinel substituted nanoferrites (MFe2O4): A review of synthesis, mechanism and potential applications

Recently, the intrinsic enzyme-like activities of some nanoscale materials known as "nanozymes" have become a growing area of interest. Nanosized spinel substituted ferrites (SFs) with general formula of MFe₂O₄, where M represents a transition metal, are among a group of magnetic nanomaterials attracting researchers' enormous attention because of their excellent catalytic performance, biomedical applications and capability for environmental remediation. Due to their unique nanoscale physical-chemical properties, they have been used to mimic the catalytic activity of natural enzymes such as peroxidases, oxidases and catalases. In addition, various nanocomposite materials based on SFs have been introduced as novel artificial enzymes. This review mainly highlights the synthetic approaches for newly developed SF-nanozymes and also the structural/experimental factors that are effective on the kinetics and catalytic mechanisms of enzyme-like reactions. SF-nanozymes have been found potentially capable of being applied in various fields such as enzyme-free immunoassays and biosensors for colorimetric detection of biological molecules. Therefore, the application of SF nanoparticles, as efficient enzyme mimetics have been detailed discussed.

A cobalt-doped iron oxide nanozyme as a highly active peroxidase for renal tumor catalytic therapy

The Fe₃O₄ nanozyme, the first reported nanozyme with intrinsic peroxidase-like activity, has been successfully employed for various diagnostic applications. However, only a few studies have been reported on the therapeutic applications of the Fe₃O₄ nanozyme partly due to its low affinity to the substrate H₂O₂. Herein, we report a new strategy for improving the peroxidase-like activity and affinity of the Fe₃O₄ nanozyme to H₂O₂ to generate reactive oxygen species (ROS) for kidney tumor catalytic therapy. We showed that cobalt-doped Fe₃O₄ (Co@Fe₃O₄) nanozymes possessed stronger peroxidase activity and a 100-fold higher affinity to H₂O₂ than the Fe₃O₄ nanozymes. The lysosome localization properties of Co@Fe₃O₄ enable Co@Fe₃O₄ to catalyze the decomposition of H₂O₂ at ultralow doses for the generation of ROS bursts to effectively kill human renal tumor cells both in vitro and in vivo. Moreover, our study provides the first evidence that the Co@Fe₃O₄ nanozyme is a powerful nanozyme for the generation of ROS bursts upon the addition of H₂O₂ at ultralow doses, presenting a potential novel avenue for tumor nanozyme catalytic therapy.

Cobalt dopant in Fe₃O₄ nanozymes improved their binding affinity to H₂O₂ and enhanced the tumor catalytic therapy efficacy.