Exploiting Chloroform-COware Chemistry for Pd-Catalyzed Carbonylation of Naturally Occurring and Medicinally Relevant Phenols

In this study, a ligand-free palladium-catalyzed carbonylation of phenols is conducted under ambient conditions, utilizing the "Chloroform-COware" chemistry. The developed methodology enables the conversion of diverse medicinally relevant phenols, encompassing both natural and synthetic derivatives, into their respective aryl ester counterparts. This transformation is achieved through the reaction with a broad spectrum of aryl and heteroaryl iodides. The protocol is characterized by its simplicity, generality, and wide substrate scope, delivering bioactive aryl ester derivatives in good to excellent yields. A direct comparison with the one-pot approach, resulting in poor yields of aryl esters, highlights the superior efficiency of the two-chamber setup (COware). Moreover, we successfully applied this two-chamber technique for gram-scale synthesis and postmodification of the synthesized ester to a pharmaceutically important benzocoumarin core.

Synthesis of Novel Cavitand Host Molecules via Palladium-Catalyzed Aryloxy- and Azidocarbonylation

Novel, elongated, resorcine[4]arene-based cavitands were synthesized via various consecutive reaction steps, including homogeneous catalytic aryloxy- and azidocarbonylation processes. The effects of carbon monoxide pressure and temperature on the conversion were examined in aryloxycarbonylation. It was revealed that a reaction temperature of 100 °C is required to achieve complete conversion both with monodentate (PPh₃) and bidentate (Xantphos) phosphines at different carbon monoxide pressures (1-40 bar). Using ten different phenols as O-nucleophiles, partial hydrolysis of the esters to the corresponding carboxylic acids took place-i.e., 58-90% chemoselectivities toward esters were obtained. Moreover, the influences of temperature, reaction time and the catalyst ratio on the selectivity and conversion were described in the case of azidocarbonylation reaction. The formation of the acyl azide with high chemoselevtivity can be achieved at room temperature only. The higher reaction temperatures (50 °C) and higher catalyst loadings favor the formation of the primary amide. The characterization of the target compounds (esters and acyl azides) was carried out by IR and ¹H and ¹3C NMR. The discussion of the influences of various parameters is based on in situ NMR investigations.

Supported Palladium Catalyzed Carbonylative Coupling Reactions using Carbon Monoxide as C1 Source

The carbonylative reactions of aryl halides, boronic acids, amines, activated alkene and alkynes under CO and supported palladium catalyzed conditions are very popular reactions for the synthesis of bioactive molecules, pharmaceuticals, polymers, peptides, intermediates and fine chemicals synthesis. Due to cost effectiveness and easy handling of recyclable supported palladium catalyst, it became more popular among researchers either working in academic institute or industry. In recent years, irrespective of poisoning effect of CO with palladium as major limitation, several advancements have been done through surface selection, designing and condition improvement to achieve high yield in the area of carbonylative coupling reactions. We hope this review will be helpful as a ready reference of last 20 years in the field of CO insertion reactions using diverse range of supported palladium catalysts under carbon monoxide or its sources as C1 source.

Controlled Synthesis of Palladium Nanoparticles with Size-Dependent Catalytic Activities Enabled by Organic Molecular Cages

Particle size plays a key role in the performance of metal nanoparticles (MNPs). However, the size-controlled synthesis of MNPs still represents a challenging task. In this work, we revealed a strong solvent effect on the growth of palladium nanoparticles (PdNPs), which was directed by a porous [2 + 3] organic molecular cage (OMC, Phos-cage) containing triphenylphosphine moieties. PdNPs with different average diameters of 0.8, 1.2, and 3.3 nm supported by Phos-cage were obtained by simply varying the reaction media. The catalytic performance of such ultrafine PdNPs in the reduction of p-nitrophenol and a Suzuki-Miyaura coupling reaction has been studied, which clearly shows size-dependent catalytic activity and stability. The knowledge gained in this study, controlling the size of PdNPs supported by the OMC template in different solvents, will open new possibilities for size-controlled synthesis of ultrafine MNPs with high catalytic activity and stability.

Phosphorus containing porous organic polymers: synthetic techniques and applications in organic synthesis and catalysis

The phosphorus-containing porous organic polymer is a trending material for the synthesis of heterogeneous catalysts. Decades of investigations have established phosphines as versatile ligands in homogeneous catalysis. Recently, phosphine-based heterogeneous catalysts were synthesized to exploit the same electronic properties while leveraging extra stability and reusability. In the last few decades, the catalysts were applied in diverse organic transformations, including hydroformylation, hydrogenation, C-C, C-N and C-X coupling, hydrosilylation, oxidative-carbonylation reactions, and so on. However, even though these polymers possess a multifunctional character, they face multiple synthetic issues in controlling the pore size, increasing the surface area, and creating a single type of active site. This review summarizes the developments in this field over the last few decades, highlighting the current limitation and future scope.

Recent progress in application of nanocatalysts for carbonylative Suzuki cross-coupling reactions

In the past few decades, cross-coupling of aryl halides and arylboronic acids in the presence of carbon monoxide (CO), also called carbonylative Suzuki coupling, to form two new carbon-carbon bonds in the production of synthetically and biologically important biaryl ketones, has been widely studied. Consequently, various catalytic systems have been extensively investigated in order to maximize the efficiency of this appealing area of biaryl ketone synthesis. As evidenced in the literature, nanometal-based systems are among the most powerful catalysts for this transformation as their large surface area to volume ratio and reactive morphologies allow faster reaction rates under milder CO pressure even at very low catalyst loadings. This review aims to provide an overview of the recent advances and achievements in the application of nano-sized metal catalysts for carbonylative Suzuki cross-coupling reactions, which may serve as an inspiration to researchers in their future work.

Immobilization of a Pd(ii)-containing N-heterocyclic carbene ligand on porous organic polymers: efficient and recyclable catalysts for Suzuki–Miyaura reactions

Two NHC–Pd(ii) complexes immobilized on porous organic polymers were successfully prepared via Scholl reactions and metallization. These complexes were applied in Suzuki–Miyaura reaction as heterogeneous catalysts with excellent yield and TON.

Phosphonium-Based Porous Ionic Polymer with Hydroxyl Groups: A Bifunctional and Robust Catalyst for Cycloaddition of CO2 into Cyclic Carbonates

The integration of synergic hydrogen bond donors and nucleophilic anions that facilitates the ring-opening of epoxide is an effective way to develop an active catalyst for the cycloaddition of CO₂ with epoxides. In this work, a new heterogeneous catalyst for the cycloaddition of epoxides and CO₂ into cyclic carbonates based on dual hydroxyls-functionalized polymeric phosphonium bromide (PQPBr-2OH) was presented. Physicochemical characterizations suggested that PQPBr-2OH possessed large surface area, hierarchical pore structure, functional hydroxyl groups, and high density of active sites. Consequently, it behaved as an efficient, recyclable, and metal-free catalyst for the additive and solvent free cycloaddition of epoxides with CO₂. Comparing the activity of PQPBr-2OH with that of the reference catalysts based on mono and non-hydroxyl functionalized polymeric phosphonium bromides suggested that hydroxyl functionalities in PQPBr-2OH showed a critical promotion effect on its catalytic activity for CO₂ conversion. Moreover, PQPBr-2OH proved to be quite robust and recyclable. It could be reused at least ten times with only a slight decrease of its initial activity.

Pd nanoparticles stabilized with phosphine-functionalized porous ionic polymer for efficient catalytic hydrogenation of nitroarenes in water

Small palladium nanoparticles stabilized with phosphine-functionalized PIP displayed high catalytic activity for nitroarenes hydrogenation. Nano-size Pd particles, electron-donation effect of phosphine ligand, and surface wettability account for its excellent catalytic performance.

Functionalized Magnetic Nanoparticles as Catalysts for Enantioselective Henry Reaction

With the aim to easily recover and reuse the catalyst, an efficient amino alcohol catalyst previously tested in the asymmetric addition of diethylzinc to several aromatic aldehydes has been immobilized on proper functionalized superparamagnetic core-shell magnetite-silica nanoparticles and employed in the Henry reaction in the semi-homogeneous phase. The nanocatalyst exhibits a promising catalytic activity that remains unchanged in the three catalytic cycles performed. The results prove that highly efficient catalysts, by being immobilized on suitable magnetic nanosupports, can be easily recovered and reused, maintaining their catalytic behavior.

A Porous Polymer-Based Solid Acid Catalyst with Excellent Amphiphilicity: An Active and Environmentally Friendly Catalyst for the Hydration of Alkynes

Developing efficient solid acid catalysts for aqueous organic reactions is of great importance for the development of sustainable chemistry. In this work, a porous polymeric acid catalyst was synthesized via a solvothermal copolymerization and a successive ion-exchange method. Physicochemical characterizations suggested that the prepared polymers possessed large Brunauer-Emmett-Teller (BET) surface areas, a hierarchically porous structure, excellent surface amphiphilicity, and nice swelling properties. Notably, an activity test in phenylacetylene hydration indicated that the prepared solid acid exhibited high catalytic activity in water, which outperformed commercial amberlyst-15, sulfuric acid, and benzenesulfonic acid. Moreover, the prepared solid acid can be easily recovered and reused at least four times. Additionally, a variety of aromatic and aliphatic alkynes could be effectively transformed into corresponding ketones under optimal reaction conditions.

Palladium/phosphorus-functionalized porous organic polymer with tunable surface wettability for water-mediated Suzuki–Miyaura coupling reaction

A series of phosphorus-functionalized porous organic polymers supported palladium catalysts with tunable surface wettability were successfully prepared using an easy copolymerization and successive immobilization method. The obtained polymers were carefully characterized by many physicochemical methods. Characterization results suggested that the prepared materials featured hierarchically porous structures, high pore volumes, tunable surface wettability and strong electron-donating ability towards palladium species. We demonstrated the use of these solid catalysts for water-mediated Suzuki–Miyaura coupling reactions. It was found that the surface wettability of the prepared catalysts has an important influence on their catalytic activities. The optimal catalyst, which has excellent amphipathicity and relatively high phosphorus concentration, displayed superior catalytic activity compared to the other catalysts. Under ambient conditions, a variety of aryl chlorides can be efficiently transformed to biaryls in high yields. Moreover, the catalyst could be easily recovered and reused at least six times.

A palladium/phosphorus-functionalized porous organic polymer with tunable surface wettability was successfully prepared. The catalyst displayed high catalytic activity for the water-mediated Suzuki–Miyaura coupling reaction of aryl chlorides.