Boehmite@SiO 2 @ Tris (hydroxymethyl)aminomethane‐Cu(I): a novel, highly efficient and reusable nanocatalyst for the C‐C bond formation and the synthesis of 5‐substituted 1H‐tetrazoles in green media

Nanomagnetic tetraaza (N4 donor) macrocyclic Schiff base complex of copper(ii): synthesis, characterizations, and its catalytic application in Click reactions

In this research, a novel nanomagnetic tetra-azamacrocyclic Schiff base complex of copper(ii) was produced via a post-synthetic surface modification of an Fe3O4 surface by a silane-coupling agent that contains acetylacetone functionalities at the end of its chain. Moreover, the target Cu complex that involves a tetradentate Schiff base ligand was obtained from a template reaction with o-phenylenediamine and Cu(NO3)2·3H2O. Furthermore, the prepared complex was nominated as [Fe3O4@TAM-Schiff-base-Cu(II)]. The Fourier-transform infrared (FT-IR) analysis indicates the presence of a Schiff-base-Cu complex in the catalyst. X-ray spectroscopy (EDS) and TGA analysis reveal that approximately 6-7% of the target catalyst comprises hydrocarbon moieties. The scanning electron microscope (SEM) and transmission electron microscopy (TEM) images demonstrate the presence of uniformly shaped particles, nearly spherical in nature, with sizes ranging from 9 to 18 nm. [Fe3O4@TAM-Schiff-base-Cu(II)] was applied as a catalyst for the click synthesis of a diverse range of 5-substituted-1H-tetrazoles in PEG-400 as a green medium. Regarding the electrical properties of the Cu(ii) complex, the presence of a tetra-aza (N4 donor) macrocyclic Schiff base as an N-rich ligand was reasonable - leading to its excellent capacity to catalyze these organic transformations. Finally, the high magnetization value (44.92 emu g-1) of [Fe3O4@TAM-Schiff-base-Cu(II)] enables its recycling at least four times without compromising the catalytic efficiency.

Silver Natural Asphalt Sulfonate (NA-SO3Ag): Fabrication and Utilization as a New Heterogeneous, Carbonaceous, and Retrievable Nanocatalyst for C(sp2)-X (X = C, S, and Se) Bond Formation

Silver-based catalysts are valuable catalysts in various areas of the chemical industry, organic syntheses, and transformations, and from a chemical and industrial point of view, their recycling is very important. Herein, silver natural asphalt sulfonate (NA-SO3Ag) was fabricated via the grafting of Ag(I) on the surface of the solid natural asphalt sulfonate as a novel and efficient recoverable sliver nanocatalyst. Natural asphalt is one of the hydrocarbons that are found in mineral veins. The structure of NA-SO3Ag was characterized by diverse microscopic and spectroscopic techniques including Fourier-transform infrared (FTIR), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), thermogravimetric analysis (TGA), Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD), and inductively coupled plasma optical emission spectroscopy (ICP-OES) techniques. The NA-SO3Ag nanocatalyst was utilized for C-Se and C-S bond formation via coupling reactions of aryl halides and organic disulfides/diselenides to afford a wide variety of diaryl sulfides/selenides in good to excellent yields. Additionally, the utilization of NA-SO3Ag in C-C bond formation was examined in Suzuki coupling reactions successfully. For at least 6 trials, this heterogeneous catalyst can be separated and reused without any activity reduction.

A novel and capable supported phenylazophenylenediamine-based nano-adsorbent for removal of the Pb, Cd, and Ni ions from aqueous solutions

Herein, we report the synthesis and characterization of chrysoidine (4-phenylazo-m-phenylenediamine) grafted on magnetic nanoparticles (Fe₃O₄@SiO₂@CPTMS@PhAzPhDA = FeSiPAPDA) as a novel and versatile adsorbent used for the satisfactory removal of Pb, Ni, and Cd ions from contaminated water via the formation of their complexes. The Freundlich, Langmuir, Temkin, and Redlich-Patterson isotherm models were studied to reveal the adsorption capability of the adsorbent and were found out that the Langmuir model is more compatible with the nano-adsorbent behavior. Moreover, according to the ICP tests as well as based on the Langmuir isotherm, the maximum adsorption capacity of the FeSiPAPDA-based adsorbent for the Pb ions (97.58) is more than that of Cd (78.59) and Ni ions (64.03).

Typical at glance but interesting when analyzed in detail: A story of Tris hydration

This paper provides results of dielectric relaxation (DR) spectroscopy of aqueous solutions of tris(hydroxymethyl)aminomethane (Tris) covering frequencies of 0.05 ≤ ν/GHz ≤89. The DR spectra can be well fit by a sum of Cole-Cole relaxation, assigned to the solute, and 2 Debye modes already observed for neat water. Analysis of the amplitudes reveals that Tris is hydrated by 7 H₂Os up to its solubility limit. However, the rather high effective solute dipole moment of ≈12 D suggests that H₂O dipoles in contact with Tris should reorient independently from it. Accordingly, an alternative description of the DR spectra with a superposition of 4 Debyerelaxations was attempted. In this model, the slowest mode at ∼4 GHz arises from solute reorientation and that at ∼8 GHz was assigned to dynamically retarded hydration water, whereas relaxations at ∼18 and ∼500 GHz are again those of (rather unperturbed) bulk water. Analysis of the solvent-related modes shows that Tris indeed slows down 7-8 H₂O molecules. However, the solute-solvent interaction strength is rather weak, excluding the rotation of an alleged Tris-(7-8) H₂O cluster as an entity. The now derived effective dipole moment of (6.3 ± 0.5) D for the bare Tris molecule allows speculations on its conformation. With the help of computational methods, we suggest that Tris dissolved in water most likely possesses an intramolecular H-bond between the nitrogen and hydrogen atoms of amino and hydroxyl groups, respectively. In addition, computational results indicate that the seven hydration H₂Os found by DR bind directly to the Tris OH groups.

Heteroployacid on the composite of boehmite and polyionic liquid as a catalyst for alcohol oxidation and tandem alcohol oxidation Knoevenagel condensation reactions

Using boehmite as an available and low-cost natural compound, a bi-functional catalytic composite is prepared through vinyl-functionalization of boehmite, followed by polymerization with the as-prepared bis-vinylimidazolium bromide ionic liquid and supporting of phosphotungstic acid. The catalyst was characterized via ICP, XRD, TGA, FTIR, SEM/EDS and elemental mapping analysis and applied for promoting alcohol oxidation reaction and one-pot tandem alcohol oxidation/Knoevenagel condensation reaction in aqueous media under mild reaction condition. The results indicated high catalytic activity of the catalyst for both reactions. This protocol showed high generality and aliphatic, aromatic and heterocyclic alcohols could be applied as substrates to furnish the corresponding products in high to excellent yields. Furthermore, hot filtration test confirmed true heterogeneous nature of the catalysis. The catalyst could also be recovered readily and reused for at least five runs of the reaction with low loss of the activity and phosphotungstic acid leaching upon each run.

Pd on cyclotriphosphazen-hexa imine decorated boehmite as an efficient catalyst for hydrogenation of nitro arenes under mild reaction condition

Cyclotriphosphazen-hexa imine ligand was prepared through successive reactions of phosphonitrilchloride trimer with 4-hydroxybenzaldehyde and (3-aminopropyl) triethoxy silane. The as-prepared ligand was then covalently grafted on boehmite to furnish an efficient support for the immobilization of Pd nanoparticles and synthesis of a novel heterogeneous catalyst for hydrogenation of nitro arenes. The catalytic tests revealed that the catalyst had excellent catalytic activity for hydrogenation of various nitro arenes with different steric and electronic features under mild reaction condition in aqueous media. Noteworthy, the catalyst was highly selective and in the substrates with ketone or aldehyde functionalities, reduction of nitro group was only observed. The catalyst was also recyclable and only slight loss of activity was detected after each recycling run. Hot filtration test also approved true heterogeneous nature of catalysis.

Nanomaterial catalyzed green synthesis of tetrazoles and its derivatives: a review on recent advancements

Tetrazoles are indispensable nitrogen containing heterocyclic scaffolds that offer a broad spectrum of applications in various domains such as medicinal chemistry, high energy material science, biochemistry, pharmacology etc. Owing to their useful applications, a wide range of catalysts have been explored for green synthesis of tetrazole derivatives. In recent times, nanomaterials have been emerged as extremely efficient catalysts for different organic transformations because of their high surface area-to-volume ratio, easy surface modification, simple fabrications, easy recovery and reusability. In this article, we have presented an overview of utilization of various nano-catalysts, nanocomposites and other solid-supported nanomaterials as an efficient environmental benign catalytic system for green synthesis of tetrazoles and derivatives. This review will provide an exclusive emphasis on boehmite, magnetic, copper, carbon, MCM-41, and composite based nanomaterials that have been developed since the year 2010 for the synthesis of tetrazole derivatives. In addition, we have briefly discussed the fabrication, functionalization and characterization of some novel nanomaterials and their advantages in the synthesis of tetrazole and its derivatives along with the reaction mechanism that involves synthesis of tetrazole derivatives via nanomaterials catalysed reactions.

An overview of the synthetic route to the marketed formulations of pyrimidine: A Review

Pyrimidine and its derivatives are a very important class of heterocyclic compounds that show interesting applications in the field of medicinal chemistry. Pyrimidine not only plays an important role as an organic reaction intermediate but also has a wide range of interesting biological activities viz. antibacterial, antifungal, anticancer, anti-inflammatory, antiviral, and antiprotozoal activity, etc. Numerous methods are available for the formation of pyrimidine derivatives have been reported in the literature. The advantage of pyrimidine as a starting material for different therapeutically potent derivatives has given momentum to this research. This review aims to report the new work on the synthesis of marketed drugs which consist of pyrimidine moiety.

A novel strategy for stabilization of sub-nanometric Pd colloids on kryptofix functionalized MCM-41: nanoengineered material for Stille coupling transformation

The stabilization of sub-nanometric metal particles (< 1 nm) with suitable distribution remained challenging in the catalytic arena. Herein, an intelligent strategy was described to anchoring and stabilizing sub-nanometric Pd colloids with an average size of 0.88 nm onto Kryptofix 23 functionalized MCM-41. Then, the catalytic activity of Pd@Kryf/MCM-41 was developed in Stille coupling reaction with a turnover frequency (TOF) value of 247 h-1. The findings demonstrate that porous MCM-41 structure and high-affinity Kryptofix 23 ligand toward adsorption of Pd colloids has a vital role in stabilizing the sub-nanometric particles and subsequent catalytic activity. Overall, these results suggest that Pd@Kryf/MCM-41 is a greener, more suitable option for large-scale applications and provides new insights into the stabilization of sub-nanometric metal particles.