Antibacterial electrospun chitosan/poly(vinyl alcohol) nanofibers containing silver nitrate and titanium dioxide

Antibacterial and antioxidant properties of Cichorium intybus extract embedded in chitosan nanocomposite nanofibers

Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) bacteria acquired serious bacterial resistance against antibiotics. Untreated dangerous infections can cause death. We proposed nanofibers (NFs) of Polyvinyl alcohol (PVA)/Chitosan (CS) nanocomposite embedded with Chicory root extract (CRE) as a safe solution. We determined the best extraction solvent and drying method, 70 % ethanol and freeze-drying, respectively. We investigated the optimal electrospinner parameters for a smooth PVA/CS NFs. Finally, we discovered PVA/CS/CRE-50 mg (F4) to be the most effective antibacterial and antioxidant CRE concentration. Interestingly, it was found that ethanolic extract had the highest yield % at 24.7 % with Total Phenolic Contents (TPC) of 4 mg Gallic Acid Equivalent (GAE)/1 g, 80 % antioxidant activity at 25 mg with an IC50 of 4.15 mg/mL and a Minimum Bactericidal Concentration (MBC) of 100 mg against S. aureus and 25 mg against E. coli. Remarkably, F4 NFs had an IC50 33.32 mg/mL, Entrapment Efficiency 64.89 %, Loading Capacity 4.41 %, obeying Noyes-Whitney release model. F4 had an MBC of 2 mg with both bacterial strains, which proved to be potent antibacterial material that surpasses the pure extract 50 times. F4 has also shown an extraordinary antioxidant activity that exceeds PVA/CS NF activity 23 times.

A Review on Antibacterial Biomaterials in Biomedical Applications: From Materials Perspective to Bioinks Design

In tissue engineering, three-dimensional (3D) printing is an emerging approach to producing functioning tissue constructs to repair wounds and repair or replace sick tissue/organs. It allows for precise control of materials and other components in the tissue constructs in an automated way, potentially permitting great throughput production. An ink made using one or multiple biomaterials can be 3D printed into tissue constructs by the printing process; though promising in tissue engineering, the printed constructs have also been reported to have the ability to lead to the emergence of unforeseen illnesses and failure due to biomaterial-related infections. Numerous approaches and/or strategies have been developed to combat biomaterial-related infections, and among them, natural biomaterials, surface treatment of biomaterials, and incorporating inorganic agents have been widely employed for the construct fabrication by 3D printing. Despite various attempts to synthesize and/or optimize the inks for 3D printing, the incidence of infection in the implanted tissue constructs remains one of the most significant issues. For the first time, here we present an overview of inks with antibacterial properties for 3D printing, focusing on the principles and strategies to accomplish biomaterials with anti-infective properties, and the synthesis of metallic ion-containing ink, chitosan-containing inks, and other antibacterial inks. Related discussions regarding the mechanics of biofilm formation and antibacterial performance are also presented, along with future perspectives of the importance of developing printable inks.

Liquefied Polysaccharides-Based Polymer with Tunable Condensed State Structure for Antimicrobial Shield by Multiple Processing Methods

The phase behavior of biomolecules containing persistent molecular entities is generally limited due to their characteristic size that exceeds the intermolecular force field. Consequently, favorable properties normally associated with the liquid phase of a substance, such as fluidity or processability, are not relevant for the processing of biomolecules, thus hindering the optimal processing of biomolecules. The implied problem that arises is how to convert folded biomolecules to display a richer phase behavior. To alleviate this dilemma, a generic approach to liquefied polysaccharides-based polymers is proposed, resulting in a polysaccharide fluid with a tunable condensed state structure (solid-gel-liquid). Polysaccharide biobased fluids materials transcend the limits of the physical state of the biobased material itself and can even create completely new properties (different processing methods as well as functions) in a variety of polymeric structures. Considering the solvent incompatible high and low-temperature applications, this method will have a great influence on the design of nanostructures of biomolecular derivatives and is expected to transform biomass materials such as polysaccharide biopolymers from traditional use to resource use, ultimately leading to the efficient use of biomass materials and their sustainability.

Fabrication of Hybrid Nanofibers from Biopolymers and Poly (Vinyl Alcohol)/Poly (ε-Caprolactone) for Wound Dressing Applications

The management of chronic wounds is challenging. The factors that impede wound healing include malnutrition, diseases (such as diabetes, cancer), and bacterial infection. Most of the presently utilized wound dressing materials suffer from severe limitations, including poor antibacterial and mechanical properties. Wound dressings formulated from the combination of biopolymers and synthetic polymers (i.e., poly (vinyl alcohol) or poly (ε-caprolactone) display interesting properties, including good biocompatibility, improved biodegradation, good mechanical properties and antimicrobial effects, promote tissue regeneration, etc. Formulation of these wound dressings via electrospinning technique is cost-effective, useful for uniform and continuous nanofibers with controllable pore structure, high porosity, excellent swelling capacity, good gaseous exchange, excellent cellular adhesion, and show a good capability to provide moisture and warmth environment for the accelerated wound healing process. Based on the above-mentioned outstanding properties of nanofibers and the unique properties of hybrid wound dressings prepared from poly (vinyl alcohol) and poly (ε-caprolactone), this review reports the in vitro and in vivo outcomes of the reported hybrid nanofibers.

Silver Nanoparticle-Based Nanocomposites for Combating Infectious Pathogens: Recent Advances and Future Prospects

Silver nanoparticles (Ag NPs) and their nanocomposites with polymers are potent agents for antibacterial and disinfectant applications. The structural parameters of Ag-NPs, such as size, shape, and surface area, are very critical for developing appropriate formulations for the targeted applications. The impact of these factors on the performance of Ag NPs is analyzed. Ag NPs with a broad spectrum of antibacterial activities have already found applications in wound and burn dressing, food preservation, agricultural ponds, treatment for infected areas, coatings, water treatment, and other biomedical applications. Ag NPs are quite useful against antibiotic-resistant bacteria, but their level of toxicity needs careful investigation as their toxicity could be very harmful to human health and the environment. This review discusses the challenges and prospects of various Ag NPs and their composites. The review will enrich the knowledge about the efficiency and mechanism of various Ag nanoparticle-based antibacterial agents.

Efficient removal of water bacteria and viruses using electrospun nanofibers

Pathogenic contamination has been considered as a significant worldwide water quality concern. Due to providing promising opportunities for the production of nanocomposite membranes with tailored porosity, adjustable pore size, and scaled-up ability of biomolecules incorporation, electrospinning has become the center of attention. This review intends to provide a detailed summary of the recent advances in the fabrication of antibacterial and antiviral electrospun nanofibers and discuss their application efficiency as a water filtration membrane. The current review attempts to give a functionalist perspective of the fundamental progress in construction strategies of antibacterial and antiviral electrospun nanofibers. The review provides a list of antibacterial and antiviral agents commonly used as water membrane filters and discusses the challenges in the incorporation process. We have thoroughly studied the recent application of functionalized electrospun nanofibers in the water disinfection process, with an emphasis on their efficiency. Moreover, different antibacterial and antiviral assay techniques for membranes are discussed, the gaps and limitations are highlighted and promising strategies to overcome barriers are studies.

Antibacterial and Osteoconductive Effects of Chitosan/Polyethylene Oxide (PEO)/Bioactive Glass Nanofibers for Orthopedic Applications

This study investigated the efficiency of chitosan/polyethylene oxide (PEO)-based nanofibers with incorporated bioactive glass particles as a coating for titanium alloy, in order to improve the bacteriostatic behavior and, concurrently, promote the production of mineralized tissue. Nanofibers with and without bioglass powder were fabricated by electrospinning technique and characterized using several microscopic and spectroscopic techniques in order to study their morphological and physiochemical properties. Subsequently, the substrates were tested in vitro against Staphylococcus epidermidis and SaOS-2 human osteosarcoma cell line. After in vitro testing, viability and CFU counting assays combined with fluorescence microscopy showed a clear decrease in bacterial growth on all substrates with increasing time. However, this trend was stronger for substrates coated with nanofibers. Formation of mineralized matrix upon exposure to osteoblasts was confirmed by means of SEM/EDX and the content/distribution of osteocalcin and osteopontin estimated by fluorescence microscopy. Incorporation of bioglass promoted biomineralization and stimulated osteoblasts to produce a higher amount of bone extracellular matrix. The present results suggest that a chitosan/PEO/bioactive glass nanofiber composite applied as coating on titanium alloys could concurrently improve antibacterial and osteoconductive properties and could be a potential candidate for dental and orthopedic applications.

Antibacterial properties of electrospun Ti3C2Tz(MXene)/chitosan nanofibers

Electrospun natural polymeric bandages are highly desirable due to their low-cost, biodegradability, non-toxicity and antimicrobial properties. Functionalization of these nanofibrous mats with two-dimensional nanomaterials is an attractive strategy to enhance the antibacterial effects. Herein, we demonstrate an electrospinning process to produce encapsulated delaminated Ti₃C₂T_z (MXene) flakes within chitosan nanofibers for passive antibacterial wound dressing applications. In vitro antibacterial studies were performed on crosslinked Ti₃C₂T_z/chitosan composite fibers against Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus) – demonstrating a 95% and 62% reduction in colony forming units, respectively, following 4 h of treatment with the 0.75 wt% Ti₃C₂T_z – loaded nanofibers. Cytotoxicity studies to determine biocompatibility of the nanofibers indicated the antibacterial MXene/chitosan nanofibers are non-toxic. The incorporation of Ti₃C₂T_z single flakes on fiber morphology was analyzed by scanning electron microscopy (SEM) and transmission electron microscopy equipped with an energy-dispersive detector (TEM-EDS). Our results suggest that the electrospun Ti₃C₂T_z/chitosan nanofibers are a promising candidate material in wound healing applications.

Electrospun natural polymeric bandages are highly desirable due to their low-cost, biodegradability, non-toxicity and antimicrobial properties.

Preparation, Characterization, and Antimicrobial Properties of Chitosan-Silver Nanocomposites Films Against Fish Pathogenic Bacteria and Fungi

Abstract

Development of nanostructured films using natural polymers and metals has become a considerable interest in various biomedical applications. Objective of the present study was to develop silver nano particles (AgNPs) embedded chitosan films with antimicrobial properties. Based on the Ag content, two types of chitosan silver nano films, named as CAgNfs-12 (12 mM) and CAgNfs-52 (52 mM) were prepared and characterized. Field emission scanning electron microscope (FE-SEM) images of two CAgNfs showed the circular AgNPs, which were uniformly embedded and distributed in the matrix of chitosan films. Antimicrobial experiment results clearly indicated that CAgNfs can inhibit the growth of fish pathogenic bacteria Vibrio (Allivibrio) salmonicida, V. tapetis, Edwardsiella tarda and fungi Fusarium oxysporum. Moreover, CAgNfs significantly reduced the experimentally exposed V. salmonicida levels in artificial seawater, suggesting that these CAgNfs could be used to develop antimicrobial filters/membranes for water purifying units to eliminate the pathogenic microbes.

Graphical Abstract

Fabrication of chitosan/PEO nanofiber mats with mica by electrospinning

Chitosan (CS) is an excellent biocompatible natural antibacterial material that has attracted researchers to study its biological applications as artificial tissue scaffolds and wound-healing materials. In this research, CS has been mixed with polyethylene oxide (PEO) and mica at various weight ratios to prepare nanofibers; however, it is found to be a difficult task to prepare the nanofiber using pure CS. The composite in form of nanofibrous mat was prepared with CS/PEO solution and CS/PEO/mica solution using electrospinning. Processing conditions were adjusted to a flow rate of 6 ml/min, with an applied voltage of 27 kV. The distance of capillary tip to target was kept about 10 cm at 25°C with a collector having a speed of 200 rpm. The spinnability of solutions was also evaluated by using both plate and cylinder collectors. The composite mats were analyzed in detail using scanning electron microscopy (SEM), Fourier transform infrared (FTIR), thermogravimetric analysis, and X-ray diffractogram (XRD). SEM photomicrograms indicated that the morphology and diameter of the nanofibers were affected by weight ratio of CS/PEO, concentration of mica, and types of collector. Furthermore, mica was incorporated in the CS/PEO matrix to enhance the specific surface area. Molecular interactions between CS/PEO and mica were investigated using FTIR and XRD.

Determination of 4-nitrophenol in water by use of a screen-printed carbon electrode modified with chitosan-crafted ZnO nanoneedles

The toxicity and environmental pollution by nitro aromatic compounds in water samples is the most recognized problem in worldwide. Hence, we have developed a simple and highly sensitive electrochemical method for the determination of 4-nitrophenol (4-NP) in water samples based on a chitosan (CHT) crafted zinc oxide nanoneedles (ZnO NDs) modified screen printed carbon electrode. The CHT/ZnO NDs were characterized by Field emission scanning electron microscope, Fourier transform infrared spectroscopy and X-ray diffraction technique. The CHT/ZnO NDs modified electrode showed an enhanced electrocatalytic activity and lower potential detection towards 4-NP, compared with other modified electrodes. Under optimum conditions, the differential pulse voltammetry (DPV) response of CHT/ZnO NDs modified electrode displayed a wide linear response range from 0.5 to 400.6μM towards the detection of 4-NP with a detection limit (LOD) of 0.23μM. The CHT/ZnO NDs modified electrode was used for specific and sensitive detection of 4-NP in presence of possible interfering species and common metal ions with long-term stability. In addition, the excellent analytical performance of the proposed sensor was successfully applied for determination of 4-NP in water samples.

Regulating the gaps between folds on the surface of silk fibroin membranes via LBL deposition for improving their biomedical properties

Silk fibroin (SF) has become a promising biomaterial in guided bone regeneration (GBR). In an attempt to modify the size of the gaps on the surface of SF barrier membrane and improve its antibacterial activity, biological and mechanical properties, positively charged Lysozyme (LY)-Collagen Type-I (COL) composites and negatively charged SF were introduced to the negatively charged surface of SF substrates utilizing the electrostatic layer-by-layer (LBL) self-assembly technique. The morphology, chemical structures and element content of the LBL structured membranes were investigated. The results suggested that LY and COL were successfully assembled and the gaps between the folds on the surface of the membranes became smaller gradually with the increase of coated film numbers. Besides, the content of β-sheets of the membranes increased after deposition, which indicated the improvement of their mechanical properties. Moreover, the results of the measurement of immobilized LY and antibacterial assay not only revealed that the enzymatic catalysis and antibacterial activity of the samples enhanced with the increase of coated bilayer numbers but also implied that LBL modified membranes had better antibacterial activity when LY-COL was on the outermost layer. Furthermore, CCK-8 assay certified both SF membrane and LBL structured membranes could facilitate cell growth and proliferation, and the introduction of COL could further promote this ability. Finally, cell attachment and morphology examination provided intuitional evidence that SF membrane and LBL modified membranes have excellent biocompatibility.

Honey/Chitosan Nanofiber Wound Dressing Enriched with Allium sativum and Cleome droserifolia: Enhanced Antimicrobial and Wound Healing Activity

Two natural extracts were loaded within fabricated honey, poly(vinyl alcohol), chitosan nanofibers (HPCS) to develop biocompatible antimicrobial nanofibrous wound dressing. The dried aqueous extract of Cleome droserifolia (CE) and Allium sativum aqueous extract (AE) and their combination were loaded within the HPCS nanofibers in the HPCS-CE, HPCS-AE, and HPCS-AE/CE nanofiber mats, respectively. It was observed that the addition of AE resulted in the least fiber diameter (145 nm), whereas the addition of the AE and CE combination resulted in the least swelling ability and the highest weight loss. In vitro antibacterial testing against Staphylococcus aureus, Escherichia coli, Methicillin-resistant S. aureus (MRSA), and multidrug-resistant Pseudomonas aeruginosa was performed in comparison with the commercial dressing AquacelAg and revealed that the HPCS-AE and HPCS-AE/CE nanofiber mats allowed complete inhibition of S. aureus and the HPCS-AE/CE exhibited mild antibacterial activity against MRSA. A preliminary in vivo study revealed that the developed nanofiber mats enhanced the wound healing process as compared to the untreated control as proved by the enhanced wound closure rates in mice and by the histological examination of the wounds. Moreover, comparison with the commercial dressing Aquacel Ag, the HPCS, and HPCS-AE/CE demonstrated similar effects on the wound healing process, whereas the HPCS/AE allowed an enhanced wound closure rate. Cell culture studies proved the biocompatibility of the developed nanofiber mats in comparison with the commercial Aquacel Ag, which exhibited noticeable cytotoxicity. The developed natural nanofiber mats hold potential as promising biocompatible antibacterial wound dressing.

Electrospun gelatin nanofibers loaded with vitamins A and E as antibacterial wound dressing materials

Illustration showing the fabrication process and test contents of electrospun gelatin nanofibers loaded with vitamins A and E as wound dressing materials in this paper.

Electrospun Polyvinyl Alcohol/ Pluronic F127 Blended Nanofibers Containing Titanium Dioxide for Antibacterial Wound Dressing

In this study, an antibacterial electrospun nanofibers for wound dressing application was successfully prepared from polyvinyl alcohol (PVA), Pluronic F127 (Plur), polyethyleneimine (PEI) blend solution with titanium dioxide nanoparticles (TiO2 NPs). PVA-Plur-PEI nanofibers containing various ratios of TiO2 NPs were obtained. The formation and presence of TiO2 in the PVA-Plu-PEI/ TiO2 composite was confirmed by X-ray diffraction (XRD). Transmission electron microscopy (TEM), Fourier transform infrared (FTIR), thermal gravimetric analysis (TGA), mechanical measurement, and antibacterial activity were undertaken in order to characterize the PVA-Plur-PEI/TiO2 nanofiber morphology and properties. The PVA-Plu-PEI nanofibers had a mean diameter of 220 nm, and PVA-Plur-PEI/TiO2 nanofibers had 255 nm. Moreover, the antimicrobial properties of the composite were studied by zone inhibition against Gram-negative bacteria, and the result indicates high antibacterial activity. Results of this antibacterial testing suggest that PVA-Plur-PEI/TiO2 nanofiber may be effective in topical antibacterial treatment in wound care; thus, they are very promising in the application of wound dressings.

Polyacrylonitrile/Syzygium aromaticum hierarchical hydrophilic nanocomposite as a carrier for antibacterial drug delivery systems

A versatile, maneuverable electrospinning process was exploited to fabricate intertwined-heterostructure polyacrylonitrile (PAN) nanofibers by incorporating the essential oilSyzygium aromaticumfor antibacterial drug delivery systems.

Emerging chitin and chitosan nanofibrous materials for biomedical applications

Over the past several decades, we have witnessed significant progress in chitosan and chitin based nanostructured materials. The nanofibers from chitin and chitosan with appealing physical and biological features have attracted intense attention due to their excellent biological properties related to biodegradability, biocompatibility, antibacterial activity, low immunogenicity and wound healing capacity. Various methods, such as electrospinning, self-assembly, phase separation, mechanical treatment, printing, ultrasonication and chemical treatment were employed to prepare chitin and chitosan nanofibers. These nanofibrous materials have tremendous potential to be used as drug delivery systems, tissue engineering scaffolds, wound dressing materials, antimicrobial agents, and biosensors. This review article discusses the most recent progress in the preparation and application of chitin and chitosan based nanofibrous materials in biomedical fields.

Electrospun chitosan microspheres for complete encapsulation of anionic proteins: controlling particle size and encapsulation efficiency

Electrospinning was employed to fabricate chitosan microspheres by a single-step encapsulation of proteins without organic solvents. Chitosan in acetic acid was electrospun toward a grounded sodium carbonate solution at various electric potential and feeding rates. Electrospun microspheres became insoluble and solidified in the sodium carbonate solution by neutralization of chitosan acetate. When the freeze-dried microspheres were examined by scanning electron microscopy, the small particle size was obtained at higher voltages. This is explained by the chitosan droplet size at the electrospinning needle was clearly controllable by the electric potential. The recovery yield of chitosan microspheres was dependent on the concentration of chitosan solution due to the viscosity is the major factor affecting formation of chitosan droplet during curling of the electrospinning jets. For protein encapsulation, fluorescently labeled bovine serum albumin (BSA) was codissolved with chitosan in the solution and electrospun. At higher concentration of sodium carbonate solution and longer solidification time in the solution, the encapsulation efficiency of the protein was confirmed to be significantly high. The high encapsulation efficiency was achievable by instant solidification of microspheres and electrostatic interactions between chitosan and BSA. Release profiles of BSA from the microspheres showed that the protein release was faster in acidic solution due to dissolution of chitosan. Reversed-phase chromatography of the released fractions confirmed that exposure of BSA to acidic solution during the electrospinning did not result in structural changes of the encapsulated protein.

Chitosan-based nanofibrous membranes for antibacterial filter applications

Nanofibrous membranes have drawn considerable interest for filtration applications due to their ability to withstand high fluid flux while removing micro- and nano-sized particulates from solution. The desire to introduce an antibacterial function into water filter applications presents a challenge to widespread application of fibrous membranes because the addition of chemicals or biocides may produce harmful byproducts downstream. Here, we report the development of chitosan-polycaprolactone (PCL) nanofibrous membranes to utilize the natural antibacterial property of chitosan for antibacterial water filtration. Chitosan-PCL fibers with diameters of 200-400 nm and chitosan contents of 25, 50 and 75 wt% were prepared by electrospinning. In a series of bacterial challenge tests, chitosan-PCL fibrous membranes significantly reduced Staphylococcus aureus adhesion compared to PCL fibrous membranes. In water permeability and particulate size removal tests, fibrous membranes with 25% chitosan supported the greatest water flux (∼7000 L/h/m(2)) with 100% removal of 300-nm particulates, while maintaining the membrane integrity. This study demonstrates the potential of chitosan-PCL nanofibrous membranes as pre-filters for water filtration systems that demonstrate combinatorial filtration and intrinsic antibacterial advantages.

Antibacterial multilayer films fabricated by LBL immobilizing lysozyme and HTCC on nanofibrous mats

Cellulose acetate nanofibrous mats were prepared by electrospunning technique. Positively charged and negatively charged composites were alternately deposited on negatively charged CA mats via layer-by-layer self-assembly technique. The morphology and inhibition rate of samples were investigated by regulating number of deposition bilayers and composition of outermost layer. Field emission scanning electron microscopy images indicated that the average diameter of fibers was increased with increasing the number of coating bilayers. Additionally, the catalytic activity of immobilized LY was measured and results showed "layer-by-layer alternative oscillation" phenomenon. The results of antibacterial assay indicated that (LY-HTCC/ALG)(10.5) films coating had the best inhibitory effect.

Biocidal activity of plasma modified electrospun polysulfone mats functionalized with polyethyleneimine-capped silver nanoparticles

The incorporation of silver nanoparticles (AgNPs) into polymeric nanofibers has attracted a great deal of attention due to the strong antimicrobial activity that the resulting fibers exhibit. However, bactericidal efficacy of AgNP-coated electrospun fibrous mats has not yet been demonstrated. In this study, polysulfone (PSf) fibers were electrospun and surface-modified using an oxygen plasma treatment, which allowed for facile irreversible deposition of cationically charged polyethyleneimine (PEI)-AgNPs via electrostatic interactions. The PSf-AgNP mats were characterized for relative silver concentration as a function of plasma treatment time using ICP-MS and changes in contact angle. Plasma treatment of 60 s was the shortest time required for maximum loss of bacteria (Escherichia coli) viability. Time-dependent bacterial cytotoxicity studies indicate that the optimized PSf-AgNP mats exhibit a high level of inactivation against both gram negative bacteria, Escherichia coli, and gram positive bacteria, Bacillus anthracis and Staphylococcus aureus.

Magnetic biodegradable Fe3O4/CS/PVA nanofibrous membranes for bone regeneration

In recent years, interest in magnetic biomimetic scaffolds for tissue engineering has increased considerably. The aim of this study is to develop magnetic biodegradable fibrous materials with potential use in bone regeneration. Magnetic biodegradable Fe(3)O(4)/chitosan (CS)/poly vinyl alcohol (PVA) nanofibrous membranes were achieved by electrospinning with average fiber diameters ranging from 230 to 380 nm and porosity of 83.9-85.1%. The influences of polymer concentration, applied voltage and Fe(3)O(4) nanoparticles loading on the fabrication of nanofibers were investigated. The polymer concentration of 4.5 wt%, applied voltage of 20 kV and Fe(3)O(4) nanoparticles loading of lower than 5 wt% could produce homogeneous, smooth and continuous Fe(3)O(4)/CS/PVA nanofibrous membranes. X-ray diffraction (XRD) data confirmed that the crystalline structure of the Fe(3)O(4), CS and PVA were maintained during electrospinning process. Fourier transform infrared spectroscopy (FT-IR) demonstrated that the Fe(3)O(4) loading up to 5 wt% did not change the functional groups of CS/PVA greatly. Transmission electron microscopy (TEM) showed islets of Fe(3)O(4) nanoparticles evenly distributed in the fibers. Weak ferrimagnetic behaviors of membranes were revealed by vibrating sample magnetometer (VSM) test. Tensile test exhibited Young's modulus of membranes that were gradually enhanced with the increase of Fe(3)O(4) nanoparticles loading, while ultimate tensile stress and ultimate strain were slightly reduced by Fe(3)O(4) nanoparticles loading of 5%. Additionally, MG63 human osteoblast-like cells were seeded on the magnetic nanofibrous membranes to evaluate their bone biocompatibility. Cell growth dynamics according to MTT assay and scanning electron microscopy (SEM) observation exhibited good cell adhesion and proliferation, suggesting that this magnetic biodegradable Fe(3)O(4)/CS/PVA nanofibrous membranes can be one of promising biomaterials for facilitation of osteogenesis.

Antibacterial activity of electrospun polymer mats with incorporated narrow diameter single-walled carbon nanotubes

Polymer coatings featuring nonleaching antibacterial agents are needed to significantly reduce bacterial colonization and subsequent biofilm formation. Previously, single-walled carbon nanotubes (SWNTs) have been reported to be strong antimicrobial agents that kill microbes on contact. However, the antibacterial activity of freestanding polymer mats with a low weight percent of incorporated SWNTs has not been demonstrated. In this study, four different weight percents of well characterized, small diameter (0.8 nm) SWNTs were incorporated into electrospun polysulfone (PSf) mats. Electrospun PSf-SWNT mats were observed to be flexible and composed of continuous, cylindrical, and randomly oriented fibers. SEM micrographs revealed that SWNT ends were distributed along the longitudinal fiber axis. Loss of bacteria (Escherichia coli) viability was observed to directly correlate to increased SWNT incorporation within the mat, ranging from 18% for 0.1 wt % SWNTs to 76% for 1.0 wt % SWNTs. Time-dependent bacterial cytotoxicity studies indicated that the antimicrobial action of the PSf-SWNT mats occurs after a short contact time of 15 min or less. This study demonstrates the potential applicability of electrospun PSf-SWNT mats as antibacterial coatings.