Living Antimicrobial Wound Dressings: Using Probiotic-Loaded, Alginate Nanofibers for Protection against Methicillin-Resistant Staphylococcus aureus

Living probiotic bacteria can be used as an alternative treatment to fight antibiotic-resistant, pathogenic bacteria. Electrospinning probiotics into nanofibers allows the probiotics to be conveniently applied like a wound dressing to protect open wounds while providing antimicrobial activity. In this letter, we encapsulated Lactococcus lactis into biocompatible, alginate-based nanofiber scaffolds. After cross-linking the scaffold to increase the chemical stability of the fibers, the encapsulated L. lactis cells maintained their ability to inhibit the growth of Staphylococcus aureus. This living wound dressing was especially effective at inhibiting the growth of clinically relevant methicillin-resistant S. aureus.

Effect of pH Value on the Electrical Properties of PEDOT:PSS-Based Fiber Mats

Nanofiber mats containing poly(3,4-ethylenedioxythiophene) (PEDOT) hold potential for use in wearable electronic applications. Unfortunately, the use of PEDOT is often limited by the acidic nature of polystyrenesulfonate (PSS), a common dispersant for PEDOT. In this study, we explored the impact of increasing the pH value of PEDOT:PSS/poly(vinyl alcohol) (PVA) precursors on the morphological and electrical properties of the resultant electrospun fibers. Specifically, electrospun nanofibers were analyzed using scanning electron microscopy, bright-field microscopy, and two-point probe measurements. We discovered that neutral and even slightly basic PEDOT:PSS/PVA precursors could be electrospun without affecting the resultant electrical properties. While cross-linking effectively stabilized the fibers, their electrical properties decreased after exposure to solutions with pH values between 5 and 11, as well as with agitated soap washing tests. Additionally, we report that the fiber mats maintained their stability after more than 3000 cycles of voltage application. These findings suggest that PEDOT:PSS-based fibers hold potential for use in wearable textile and sensor applications, where long-term durability is needed.

Ring-opening metathesis polymerization of N-methylpyridinium-fused norbornenes to access antibacterial main-chain cationic polymers

Cationic polymers have been identified as a promising type of antibacterial molecules, whose bioactivity can be tuned through structural modulation. Recent studies suggest that the placement of the cationic groups close to the core of the polymeric architecture rather than on appended side chains might improve both their bioactivity and selectivity for bacterial cells over mammalian cells. However, antibacterial main-chain cationic polymers are typically synthesized via polycondensations, which do not afford precise and uniform molecular design. Therefore, accessing main-chain cationic polymers with high degrees of molecular tunability hinges upon the development of controlled polymerizations tolerating cationic motifs (or cation progenitors) near the propagating species. Herein, we report the synthesis and ring-opening metathesis polymerization (ROMP) of N-methylpyridinium-fused norbornene monomers. The identification of reaction conditions leading to a well-controlled ROMP enabled structural diversification of the main-chain cationic polymers and a study of their bioactivity. This family of polyelectrolytes was found to be active against both Gram-negative (Escherichia coli) and Gram-positive (Methicillin-resistant Staphylococcus aureus) bacteria with minimal inhibitory concentrations as low as 25 µg/mL. Additionally, the molar mass of the polymers was found to impact their hemolytic activity with cationic polymers of smaller degrees of polymerization showing increased selectivity for bacteria over human red blood cells.

Stiffness and Oligomer Content Affect the Initial Adhesion of Staphylococcus aureus to Polydimethylsiloxane Gels

The growing prevalence of methicillin-resistant Staphylococcus aureus (S. aureus) infections necessitates a greater understanding of their initial adhesion to medically relevant surfaces. In this study, the influence of the mechanical properties and oligomer content of polydimethylsiloxane (PDMS) gels on the initial attachment of Gram-positive S. aureus was explored. Small-amplitude oscillatory shear rheological measurements were conducted to verify that by altering the base to curing (B:C) ratio of the commonly used Sylgard 184 silicone elastomer kit (B:C ratios of 60:1, 40:1, 10:1, and 5:1), PDMS gels could be synthesized with Young's moduli across four distinct regimes: ultrasoft (15 kPa), soft (30 kPa), standard (400 kPa), and stiff (1500 kPa). These as-prepared gels (unextracted) were compared to gels prepared from the same B/C ratios that underwent Soxhlet extraction to remove any unreacted oligomers. While the Young's moduli of unextracted and extracted PDMS gels prepared from the same B:C ratio were statistically equivalent, the associated adhesion failure energy statistically decreased for the ultrasoft gels after extraction (from 25 to 8 J/mm2). The interactions of these eight well-characterized gels with bacteria were tested by using S. aureus SH1000, a commonly studied laboratory strain, as well as S. aureus ATCC 12600, which was isolated from a human lung infection. Increased S. aureus inactivation occurred only when the bacteria were incubated directly on top of the unextracted gels prepared at high B:C ratios (40:1 and 60:1), whereas none of the extracted gels (no unreacted oligomers) had significant levels of inactivated bacteria. S. aureus adhered the least to the stiffest extracted PDMS gels (no unreacted oligomers) and the most to soft, unextracted PDMS gels (with ∼17% unreacted oligomers). These findings suggest that both unreacted oligomers and Young's moduli are important material factors to consider when exploring the attachment behavior of Gram-positive S. aureus to hydrophobic elastomer gels.

Using Catechol and Zwitterion-Functionalized Copolymers to Prevent Dental Bacterial Adhesion

In this manuscript, we report the synthesis of zwitterionic copolymers and their ability to form antifouling coatings on porous hydroxyapatite as a mimic of dental coatings. Specifically, we systematically investigated how altering the composition of copolymers of catechol methacrylate (Cat-MA or 2) and methacryloyloxyethyl phosphorylcholine (2-MPC) with varying catechol-to-zwitterion ratios impacted their adhesive and antifouling properties, allowing for the rational design of functional coatings. Characterization by ellipsometry, contact angle goniometry, and X-ray photoelectron spectroscopy revealed the presence of hydrophilic copolymer coatings of ∼10 nm thickness. Notably, these copolymers adhered to hydroxyapatite and reduced the level of attachment of both Gram-negative Escherichia coli and Gram-positive Streptococcus oralis. Additionally, in vitro experiments that mimicked the complex mouth environment (i.e., swallowing and using mouthwash) were employed to evaluate S. oralis adhesion, finding that the copolymer coatings reduced the quantity of adhered bacteria. We suggest that these copolymers provide insights into the design of antifouling coatings that are appropriate for use in oral care.

Ethanol-free Cross-Linking of Alginate Nanofibers Enables Controlled Release into a Simulated Gastrointestinal Tract Model

The use of alginate nanofibers in certain biomedical applications, including targeted delivery to the gut, is limited because an ethanol-free, biocompatible cross-linking method has not been demonstrated. Here, we developed water-stable, alginate-based nanofibers by systematically exploring post-electrospinning cross-linking approaches that used calcium ions dissolved in (1) a glycerol/water cosolvent system and (2) acidic, neutral, or basic aqueous solutions. Scanning electron microscopy proved that the fibers cross-linked in a glycerol cosolvent or pH-optimized solutions had maintained the same morphology as the ethanol-based literature control. Notably, cross-linked fibers were generally smaller in diameter than the as-spun fibers due to both chemical interactions and mass loss during cross-linking, which was supported by mass measurements, Fourier-transform infrared spectroscopy, and thermogravimetric analysis. During stability tests wherein the cross-linked fibers were exposed to three aqueous solutions, the cross-linked fibers were stable in water and acid buffer yet swelled in phosphate buffer saline, making them useful scaffolds for pH-controlled release applications. Proof-of-concept release experiments were conducted using a simulated gastrointestinal tract model. As desired, the cargo remained encapsulated within the cross-linked nanofibers when exposed to an acidic solution that modeled the stomach. Upon exposure to a solution that mimicked the intestines, the cargo was released. We suggest that these cross-linked, alginate-based nanofiber mats hold the potential to be broadly used in biomedical and environmental applications.

Electrospinning Living Bacteria: A Review of Applications from Agriculture to Health Care

Living bacteria are used in biotechnologies that lead to improvements in health care, agriculture, and energy. Encapsulating bacteria into flexible and modular electrospun polymer fabrics that maintain their viability will further enable their use. This review will first provide a brief overview of electrospinning before examining the impact of electrospinning parameters, such as precursor composition, applied voltage, and environment on the viability of encapsulated bacteria. Currently, the use of nanofiber scaffolds to deliver live probiotics into the gut is the most researched application space; however, several additional applications, including skin probiotics (wound bandages) and menstruation products have also been explored and will be discussed. The use of bacteria-loaded nanofibers as seed coatings that promote plant growth, for the remediation of contaminated wastewaters, and in energy-generating microbial fuel cells are also covered in this review. In summary, electrospinning is an effective method for encapsulating living microorganisms into dry polymer nanofibers. While these living composite scaffolds hold potential for use across many applications, before their use in commercial products can be realized, numerous challenges and further investigations remain.

Improved Recovery of Captured Airborne Bacteria and Viruses with Liquid-Coated Air Filters

The COVID-19 pandemic has revealed the importance of the detection of airborne pathogens. Here, we present composite air filters featuring a bioinspired liquid coating that facilitates the removal of captured aerosolized bacteria and viruses for further analysis. We tested three types of air filters: commercial polytetrafluoroethylene (PTFE), which is well known for creating stable liquid coatings, commercial high-efficiency particulate air (HEPA) filters, which are widely used, and in-house-manufactured cellulose nanofiber mats (CNFMs), which are made from sustainable materials. All filters were coated with omniphobic fluorinated liquid to maximize the release of pathogens. We found that coating both the PTFE and HEPA filters with liquid improved the rate at which Escherichia coli was recovered using a physical removal process compared to uncoated controls. Notably, the coated HEPA filters also increased the total number of recovered cells by 57%. Coating the CNFM filters did not improve either the rate of release or the total number of captured cells. The most promising materials, the liquid-coated HEPA, filters were then evaluated for their ability to facilitate the removal of pathogenic viruses via a chemical removal process. Recovery of infectious JC polyomavirus, a nonenveloped virus that attacks the central nervous system, was increased by 92% over uncoated controls; however, there was no significant difference in the total amount of genomic material recovered compared to that of controls. In contrast, significantly more genomic material was recovered for SARS-CoV-2, the airborne, enveloped virus, which causes COVID-19, from liquid-coated filters. Although the amount of infectious SARS-CoV-2 recovered was 58% higher, these results were not significantly different from uncoated filters due to high variability. These results suggest that the efficient recovery of airborne pathogens from liquid-coated filters could improve air sampling efforts, enhancing biosurveillance and global pathogen early warning.

Aqueous, Non-Polymer-Based Perovskite Quantum Dots for Bioimaging: Conserving Fluorescence and Long-Term Stability via Simple and Robust Synthesis

Perovskite quantum dots (PQDs) offer high photoluminescence quantum yields; however, due to their limited stability in aqueous media, to date their utilization in biomedical applications has been limited. The present work demonstrates highly fluorescent and stable aqueous PQDs that were synthesized using a facile engineered phase transfer method. Ligands were engineered to have a dual functionality, i.e., they could simultaneously mediate the strong binding of PQDs and the interactions with water molecules. The resultant water-soluble PQDs demonstrated robust structural and optical properties. The extracted aqueous PQDs remained stable in pellet form for 8 months, which was the entire test duration. Notably, 100% of their fluorescence was also retained. As a proof-of-concept experiment, the water-soluble PQDs were successfully tagged to polyclonal antibodies and used to image Escherichia coli cells in aqueous media. No structural or optical disturbance in PQDs was detected throughout the process. This work marks the beginning of the use of nonpolymeric aqueous PQDs and shows their strong potential to be used in biological applications.

Biofouling-Resistant Ultrafiltration Membranes via Codeposition of Dopamine and Cetyltrimethylammonium Bromide with Retained Size Selectivity and Water Flux

Biofouling is a serious problem in ultrafiltration (UF) membrane applications. Modifying the surface of membranes with low molecular weight, commercially available antibacterial chemistries is an excellent strategy to mitigate biofouling. Herein, we report a new strategy to impart antibacterial and anti-biofouling behavior without changing the support membrane's size selectivity and pure water permeance (PWP). To this end, a strong antibacterial agent, cetyltrimethylammonium bromide (CTAB), was codeposited with dopamine onto commercial polyethersulfone (PES) UF membranes in the presence of nitrogen (N₂) gas backflow. The PWP and pore size of the support membrane did not change with codeposition, confirming the benefit of N₂ backflow in mitigating the solution intrusion phenomenon. X-ray photoelectron spectroscopy (XPS), surface ζ potentials, and contact angle measurements confirmed the successful codeposition of polydopamine (PDA) and CTAB onto the membrane. Among three different CTAB concentrations systematically investigated, the membrane functionalized with CTAB at the critical micelle concentration (CMC) provided the best anti-biofouling activity against Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria and retained its surface ζ potential after being stored in 1 M NaCl (pH = 6.8) for 3 months. Our results demonstrate the potential of using a facile, one-step approach to modify commercial UF membranes without compromising their pore size or flux, while simultaneously endowing antibacterial activity.

Correction: Encapsulating bacteria in alginate-based electrospun nanofibers

Correction for 'Encapsulating bacteria in alginate-based electrospun nanofibers' by Emily Diep et al., Biomater. Sci., 2021, 9, 4364-4373, DOI: 10.1039/D0BM02205E.

Liquid-Infused Membranes Exhibit Stable Flux and Fouling Resistance

Antifouling membranes that offer excellent operational lifetimes are critical technologies needed to meet the growing demand for clean water. In this study, we demonstrate antifouling membranes featuring an ultrathin oil layer that stayed immobilized on the surface and in the pore walls of poly(vinylidene fluoride) membranes for multiple cycles of operation at industrially relevant transmembrane pressures. An optimized quantity of a commercial Krytox oil with either a low (K103) or a high viscosity (K107) was infused onto the active surface and into the pores of membranes with a 0.45 μm pore size. The presence of the oil layer was qualitatively confirmed using crystal violet staining and variable pressure scanning electron microscopy. Using a dead-end stirred cell, a consistent pure water permeance value of 3000 L m^-2 h^-1 bar^-1 was achieved for the K103 liquid-infused membranes for at least 10 operation cycles, which was expectedly lower than the permeance of bare control membranes (∼16 000 L m^-2 h^-1 bar^-1), suggesting that a stable oil layer was formed on all membrane-active sites. To quantify if oil was lost during membrane operation, extensive thermogravimetric analysis was conducted on both the as-prepared and used membranes. When challenged with the microorganism, Escherichia coli K12, the liquid-infused membranes statistically reduced microbial attachment by ∼50% versus the control membranes. For the first time, we have demonstrated that by forming an immobilized, robust, and stable oil-coated membrane, we can generate high-performance membranes with stable permeance values that can be operated at relevant transmembrane pressures and provide long-lasting antifouling properties.

Ultrasound-assisted dopamine polymerization: rapid and oxidizing agent-free polydopamine coatings on membrane surfaces

Herein, we report a controllable pathway to accelerate the polymerization kinetics of dopamine using ultrasound as a trigger. The use of ultrasound was demonstrated to dramatically accelerate the slow liquid phase reaction kinetics and increase the deposition rate of the polydopamine coating on the surface of polymeric membranes.

Epoxy Resin-Encapsulated Polymer Microparticles for Room-Temperature Cold Sprayable Coatings

We designed and synthesized epoxy-encapsulated microparticles with core-shell structures via suspension polymerization to enable high-efficiency, room-temperature cold spray processing. The soft core of the microparticles was comprised of a thermoset resin, diglycidyl ether of bisphenol A (DGEBA), which was optionally blended with the thermoplastic, poly(butyl acrylate); the protective shell was formed using polyurea. The composition, morphology, and thermal behavior of the microparticles were investigated. An inverse relationship between deposition efficiency and particle size was demonstrated by varying the surfactant concentration that was used during particle synthesis. We also determined that the microparticles that had pure resin as the core had the lowest viscosity, exhibited a decrease in the critical impact velocity required for adhesion, had the best flowability, and yielded a dramatic increase in deposition efficiency (56%). We have demonstrated that our in-house synthesized particles can form homogeneous, smooth, and fully coalesced coatings using room-temperature cold spray.

Robust, small diameter hydrophilic nanofibers improve the flux of ultrafiltration membranes

In this study, we systematically investigated the flux performance of ultrafiltration (UF) membranes functionalized with randomly-accumulated nanofibers. By electrospinning nanofibers from hydrophobic polysulfone (PSf) and hydrophilic cellulose (CL), we were able to explore the role that bulk nanofiber (NF) layer thickness, individual NF diameter, and intrinsic chemistry have on composite membrane flux. Additional parameters that we systematically tested include the molecular weight cut-off (MWCO) of the base membrane (10, 100, and 200 kDa), flow orientation (cross-flow versus dead-end), and the feed solution (hydrophilic water versus hydrophobic oil). Structurally, the crosslinked PSf nanofibers were more robust than the CL nanofibers, which lead to the PSfNF-UF membranes having a greater flux performance. To decouple the structural robustness from the water affinity of the fibers, we chemically modified the PSf fibers to be hydrophilic and indeed, the flux of these new composite membranes featuring hydrophilic crosslinked nanofibers were superior. In summary, the greatest increase in flux performance arises from the smallest diameter, hydrophilic nanofibers that are mechanically robust (crosslinked). We have demonstrated that electrospun nanofiber layers improve the flux performance of ultrafiltration membranes.

Encapsulating bacteria in alginate-based electrospun nanofibers

Encapsulation technologies are imperative for the safe delivery of live bacteria into the gut where they regulate bodily functions and human health. In this study, we develop alginate-based nanofibers that could potentially serve as a biocompatible, edible probiotic delivery system. By systematically exploring the ratio of three components, the biopolymer alginate (SA), the carrier polymer poly(ethylene oxide) (PEO), and the FDA approved surfactant polysorbate 80 (PS80), the surface tension and conductivity of the precursor solutions were optimized to electrospin bead-free fibers with an average diameter of 167 ± 23 nm. Next, the optimized precursor solution (2.8/1.2/3 wt% of SA/PEO/PS80) was loaded with Escherichia coli (E. coli, 108 CFU mL-1), which served as our model bacterium. We determined that the bacteria in the precursor solution remained viable after passing through a typical electric field (∼1 kV cm-1) employed during electrospinning. This is because the microbes are pulled into a sink-like flow, which encapsulates them into the polymer nanofibers. Upon electrospinning the E. coli-loaded solutions, beads that were much smaller than the size of an E. coli were initially observed. To compensate for the addition of bacteria, the SA/PEO/PS80 weight ratio was reoptimized to be 2.5/1.5/3. Smooth fibers with bulges around the live microbes were formed, as confirmed using fluorescence and scanning electron microscopy. By dissolving and plating the nanofibers, we found that 2.74 × 105 CFU g-1 of live E. coli cells were contained within the alginate-based fibers. This work demonstrates the use of electrospinning to encapsulate live bacteria in alginate-based nanofibers for the potential delivery of probiotics to the gut.

Memristive Behavior of Mixed Oxide Nanocrystal Assemblies

Recent advances in memristive nanocrystal assemblies leverage controllable colloidal chemistry to induce a broad range of defect-mediated electrochemical reactions, switching phenomena, and modulate active parameters. The sample geometry of virtually all resistive switching studies involves thin film layers comprising monomodal diameter nanocrystals. Here we explore the evolution of bipolar and threshold resistive switching across highly ordered, solution-processed nanoribbon assemblies and mixtures comprising BaZrO₃ (BZO) and SrZrO₃ (SZO) nanocrystals. The effects of nanocrystal size, packing density, and A-site substitution on operating voltage (V_SET and V_TH) and switching mechanism were studied through a systematic comparison of nanoribbon heterogeneity (i.e., BZO-BZO vs BZO-SZO) and monomodal vs bimodal size distributions (i.e., small-small and small-large). Analysis of the current-voltage response confirms that tip-induced, trap-mediated space-charge-limited current and trap-assisted tunneling processes drive the low- and high-resistance states, respectively. Our results demonstrate that both smaller nanocrystals and heavier alkaline earth substitution decrease the onset voltage and improve stability and state retention of monomodal assemblies and bimodal nanocrystal mixtures, thus providing a base correlation that informs fabrication of solution-processed, memristive nanocrystal assemblies.

Beyond the Single-Nozzle: Coaxial Electrospinning Enables Innovative Nanofiber Chemistries, Geometries, and Applications

With an ever increasing scientific, technological, and industrial interest in high surface area, porous nanofiber mats, electrospinning has emerged as a popular method to produce fibrous assemblies for use across biomedical, energy, and environmental applications. However, not all precursor solutions nor complex geometries can be easily fabricated using the traditional single-nozzle apparatus. Therefore, coaxial electrospinning, a modified version of electrospinning that features a concentrically aligned dual nozzle, has been developed. This review will first describe the mechanism of electrospinning two precursor solutions simultaneously and the operational parameters that need to be optimized to fabricate continuous fibers. Modifications that can be made to the coaxial electrospinning process, which enable the fabrication of uniform fibers with improved properties, as well as the fabrication of fibers that are hollow, functionalized, and from "nonspinnable precursors" will be discussed as a means of promoting the advantages of using a coaxial setup. Examples of how coaxially electrospun nanofibers are employed in diverse applications will be provided throughout this review. We conclude with a timely discussion about the current limitations and challenges of coaxial electrospinning.

Localized characterization of brain tissue mechanical properties by needle induced cavitation rheology and volume controlled cavity expansion

Changes in the elastic properties of brain tissue have been correlated with injury, cancers, and neurodegenerative diseases. However, discrepancies in the reported elastic moduli of brain tissue are persistent, and spatial inhomogeneities complicate the interpretation of macroscale measurements such as rheology. Here we introduce needle induced cavitation rheology (NICR) and volume-controlled cavity expansion (VCCE) as facile methods to measure the apparent Young's modulus E of minimally manipulated brain tissue, at specific tissue locations and with sub-millimeter spatial resolution. For different porcine brain regions and sections analyzed by NICR, we found E to be 3.7 ± 0.7 kPa and 4.8 ± 1.0 kPa for gray matter, and white matter, respectively. For different porcine brain regions and sections analyzed by VCCE, we found E was 0.76 ± 0.02 kPa for gray matter and 0.92 ± 0.01 kPa for white matter. Measurements from VCCE were more similar to those obtained from macroscale shear rheology (0.75 ± 0.06 kPa) and from instrumented microindentation of white matter (0.97 ± 0.40 kPa) and gray matter (0.86 ± 0.20 kPa). We attributed the higher stiffness reported from NICR to that method's assumption of a cavitation instability due to a neo-Hookean constitutive response, which does not capture the strain-stiffening behavior of brain tissue under large strains, and therefore did not provide appropriate measurements. We demonstrate via both analytical modeling of a spherical cavity and finite element modeling of a needle geometry, that this strain stiffening may prevent a cavitation instability. VCCE measurements take this stiffening behavior into account by employing an incompressible one-term Ogden model to find the nonlinear elastic properties of the tissue. Overall, VCCE afforded rapid and facile measurement of nonlinear mechanical properties of intact, healthy mammalian brain tissue, enabling quantitative comparison among brain tissue regions and also between species. Finally, accurate estimation of elastic properties for this strain stiffening tissue requires methods that include appropriate constitutive models of the brain tissue response, which here are represented by inclusion of the Ogden model in VCCE.

Facile Postprocessing Alters the Permeability and Selectivity of Microbial Cellulose Ultrafiltration Membranes

Water filtration membranes produced sustainably through microbial cellulose production can have filtration properties altered through facile chemical treatments. Microbial cellulose is an effective membrane filtration medium, and pristine microbial membranes can serve as ultrafiltration membranes with a permeability of 143 L m^-2h^-1bar^-1 and a particle size cut off of 35 nm. As living biofilms, these membranes consist of microbial cellulose, bacteria, and extracellular polymers. Thus, additional biofilm components may reduce the intrinsic permeability of the cellulose. Here, microbial membranes were treated with hydrogen peroxide (H₂O₂) and sodium hypochlorite (NaOCl, liquid bleach) to remove impurities present in microbial cellulose and increase membrane permeability. For example, permeability increased from 143 to 257 L m^-2h^-1bar^-1 with treatment by 0.3% H₂O₂ for 12 min. The membranes were also treated with sodium hydroxide (NaOH) to increase membrane selectivity, and the particle size cutoff was reduced from 35 to 10 nm post-treatment with 0.8% NaOH for 20 min. Scanning electron microscopy, Fourier-transform infrared spectroscopy, thermogravimetric analysis, contact angle goniometry, and X-ray diffraction were used to characterize the physical and chemical properties of the membrane matrix. Facile chemical treatments provide a significant degree of flexibility to tailor microbial membranes to meet specific needs. Microbial membrane production is inherently accessible, and this study furthers that accessibility by utilizing only readily available components to treat microbial membranes and expand their potential applications.

In Vitro Reconstitution of an Intestinal Mucus Layer Shows That Cations and pH Control the Pore Structure That Regulates Its Permeability and Barrier Function

Dysfunction of the intestinal mucus barrier causes disorders such as ulcerative colitis and Crohn's disease. The function of this essential barrier may be affected by the periodically changing luminal environment. We hypothesized that the pH and ion concentration in mucus control its porosity, molecular permeability, and the penetration of microbes. To test this hypothesis, we developed a scalable method to extract porcine small intestinal mucus (PSIM). The aggregation and porosity of PSIM were determined using rheometry, spectrophotometry, and microscopy. Aggregation of PSIM at low pH increased both the elastic (G') and viscous (G″) moduli, and it slowed the transmigration of pathogenic Salmonella. Molecular transport was dependent on ion concentration. At moderate concentrations, many microscopic aggregates (2-5 μm in diameter) impeded diffusion. At higher concentrations, PSIM formed aggregate islands, increasing both porosity and diffusion. This in vitro model could lead to a better understanding of mucus barrier functions and improve the treatment of intestinal diseases.

High-Performance, UV-Curable Crosslinked Films via Grafting of Hydroxyethyl Methacrylate Methylene Malonate

Thermoset coatings have been used extensively to protect and enhance the appearance of substrates for industrial maintenance and architectural applications. Here, we demonstrate that anionic polymerization can be used to first graft hydroxyethyl methacrylate methylene malonate (HEMA-MM) onto a latex particle at ambient conditions, while subsequent ultraviolet (UV) exposure enabled their crosslinking into robust coatings. At room temperature, in the presence of air and water, the polymerization of HEMA-MM was initiated by anionic carboxyl groups present on the MAA latex particles and subsequently grafted onto the surface of particles. The pendent hydroxyethyl methacrylate (HEMA) group enabled UV-curing via free radical polymerization and the formation of a crosslinked network. Systematic investigations were conducted to study the formation and performance of the crosslinked coatings as a function of HEMA-MM incorporation. The incorporation of 10 wt% HEMA-MM into MAA latex yielded crosslinked coatings with decreased swelling, a heightened glass transition temperature (by ~20 °C) and a 2.9-fold improvement in the Young's moduli compared to controls (without HEMA-MM). Here, we demonstrate a facile method that provides a one-step grafting-functionalization approach using functional methylene malonates to produce UV-curable and high-performance coatings at room temperature and under atmospheric environments.

Sustainable Living Filtration Membranes

As demand for clean water increases, there is a growing need for effective sustainable water treatment systems. We used the symbiotic culture of bacteria and yeast (SCOBY) that forms while brewing kombucha tea as a living water filtration membrane (LFM). The LFMs function as ultrafiltration membranes with a permeability of 135 ± 25 L m^-2 h^-1 bar^-1 and a 90% rejection of 30 nm nanoparticles. Because they contain living microorganisms that produce cellulose fibers, the surface of an LFM heals after a puncture or incision. Following punctures or incisions, membrane permeability, after a rapid increase postpuncture, returns to 110-250% of the original flux after 10 days in a growth solution. Additionally, LFMs may be manufactured using readily available materials, increasing membrane production accessibility.

A programmable chemical switch based on triggerable Michael acceptors

Developing an engineerable chemical reaction that is triggerable for simultaneous chemical bond formation and cleavage by external cues offers tunability and orthogonality which is highly desired in many biological and materials applications. Here, we present a chemical switch that concurrently captures these features in response to chemically and biologically abundant and important cues, viz., thiols and amines. This thiol/amine-triggerable chemical switch is based on a Triggerable Michael Acceptor (TMAc) which bears good leaving groups at its β-position. The acceptor undergoes a "trigger-to-release" process where thiol/amine addition triggers cascaded release of leaving groups and generates a less activated acceptor. The newly generated TMAc can be further reversed to liberate the original thiol/amine by a second nucleophile trigger through a "trigger-to-reverse" process. Within the small molecular volume of the switch, we have shown five locations that can be engineered to achieve tunable "trigger-to-release" kinetics and tailored reversibility. The potential of the engineerable bonding/debonding capability of the chemical switch is demonstrated by applications in cysteine-selective and reversible protein modification, universal self-immolative linkers, and orthogonally addressable hydrogels.

Photodynamically Active Electrospun Fibers for Antibiotic-Free Infection Control

Antimicrobial biomaterials are critical to aid in the regeneration of oral soft tissue and prevent or treat localized bacterial infections. With the rising trend in antibiotic resistance, there is a pressing clinical need for new antimicrobial chemistries and biomaterial design approaches enabling on-demand activation of antibiotic-free antimicrobial functionality following an infection that are environment-friendly, flexible and commercially viable. This study explores the feasibility of integrating a bioresorbable electrospun polymer scaffold with localized antimicrobial photodynamic therapy (aPDT) capability. To enable aPDT, we encapsulated a photosensitizer (PS) in polyester fibers in the PS inert state, so that the antibacterial function would be activated on-demand via a visible light source. Fibrous scaffolds were successfully electrospun from FDA-approved polyesters, either poly(ε-caprolactone (PCL) or poly[(rac-lactide)-co-glycolide] (PLGA), with encapsulated PS (either methylene blue (MB) or erythrosin B (ER)). These were prepared and characterized with regards to their loading efficiency (UV-vis spectroscopy), microarchitecture (SEM, porometry, and BET (Brunauer-Emmett-Teller) analysis), tensile properties, hydrolytic behavior (contact angle, dye release capability, degradability), and aPDT effect. The electrospun fibers achieved an ∼100 wt % loading efficiency of PS, which significantly increased their tensile modulus and reduced their average fiber diameter and pore size with respect to PS-free controls. In vitro, PS release varied between a burst release profile to limited release within 100 h, depending on the selected scaffold formulation, while PLGA scaffolds displayed significant macroscopic shrinkage and fiber merging, following incubation in phosphate buffered saline solution. Exposure of PS-encapsulated PCL fibers to visible light successfully led to at least a 1 log reduction in Escherichia coli viability after 60 min of light exposure, whereas PS-free electrospun controls did not inactive microbes. This study successfully demonstrates the significant potential of PS-encapsulated electrospun fibers as photodynamically active biomaterial for antibiotic-free infection control.

Bacteria-Resistant, Transparent, Free-Standing Films Prepared from Complex Coacervates

We report the fabrication, properties, and bacteria-resistance of polyelectrolyte complex (PEC) coatings and free-standing films. Poly(4-styrenesulfonic acid), poly(diallyldimethyl-ammonium chloride), and salt were spin-coated into PEC films. After thermal annealing in a humid environment, highly transparent, mechanically strong, and chemically robust films were formed. Notably, we demonstrate that PEC coatings significantly reduce the attachment of Escherichia coli K12 without killing the micro-organisms. We suggest that forming bacteria-resistant surface coatings from commercially available polymers holds the potential for use across a wide range of applications including high-touch surfaces in medical settings.

Predicting the performance of pressure filtration processes by coupling computational fluid dynamics and discrete element methods

To obtain a fundamental understanding of the various factors affecting pressure filtration performance, we developed a coupled computational fluid dynamics (CFD) and discrete element method (DEM) model for simulating the effect of solvent flow through the solid particle cake. The model was validated using data collected by filtering mixtures of spherical glass beads and deionized water through a dead-end cell over a range of applied pressures. Numerical experiments were performed to study the effects of particle properties, liquid properties and operating conditions on filtration performance. The model predicted that the filtrate flow rate could be strongly affected by the mean size of the particles, the presence of small particles (i.e. fines) in the particle distribution, the viscosity of the liquid, and particle deformation leading to cake compression. Our study demonstrated that CFD-DEM modeling is a powerful approach for understanding cake filtration processes and predicting filtration performance.

Anionic Polymerization of Methylene Malonate for High-Performance Coatings

Here, we demonstrate the anionic polymerization and the high reactivity of the novel monomer diethyl methylene malonate (DEMM). At room temperature and under atmospheric conditions, water and anionic functional groups (i.e., carboxyl, boronic, and phenol) quickly initiate DEMM. The polymerization of DEMM in water and the final molecular weight of the polymer were both demonstrated to be pH-dependent. Systematically, investigations were conducted to study the conversion rate of DEMM with various functional groups, and the polymerization was verified to occur with anionic groups using a carboxylate-initiated DEMM system. For coating applications, we also investigated a multifunctional derivative monomer called (DEMM)₆ that is an oligomeric polyester of DEMM esterified with butanediol that contains on average six repeat units of reactive DEMM (commercially known as Forza B3000 XP). The incorporation of 15 wt % (DEMM)₆ into latex containing methacrylate acid as a functional monomer yielded cross-linked coatings with a gel content of 76.25 wt % that had a 289% improvement in rub-resistance performance compared to controls (without (DEMM)₆). This study provides a facile methodology to synthesize cross-linked latex coatings at room temperature.

Antifouling Ultrafiltration Membranes with Retained Pore Size by Controlled Deposition of Zwitterionic Polymers and Poly(ethylene glycol)

We demonstrate antifouling ultrafiltration membranes with retained selectivity and pure water flux through the controlled deposition of zwitterionic polymers and poly(ethylene glycol) (PEG). Molecules for polymerization were immobilized on the membrane's surface yet prevented from attaching to the membrane's pores due to a backflow of nitrogen (N2) gas achieved using an in-house constructed apparatus that we named the polymer prevention apparatus, or "PolyPrev". First, the operating parameters of the PolyPrev were optimized by investigating the polymerization of dopamine, which was selected due to its versatility in enabling further chemical reactions, published metrics for comparison, and its oxidative self-polymerization. Membrane characterization revealed that the polydopamine-modified membranes exhibited enhanced hydrophilicity; moreover, their size selectivity and pure water flux were statistically the same as those of the unmodified membranes. Because it is well documented that polydopamine coatings do not provide a long-lasting antifouling activity, poly(2-methacryloyloxyethyl phosphorylcholine) (polyMPC, Mn = 30 kDa) and succinimidyl-carboxymethyl-ester-terminated PEG ( Mn = 40 kDa) were codeposited while dopamine was polymerizing to generate antifouling membranes. Statistically, the molecular-weight cutoff of the polyMPC- and PEG-functionalized membranes synthesized in the PolyPrev was equivalent to that of the unmodified membranes, and the pure water flux of the PEG membranes was equivalent to that of the unmodified membranes. Notably, membranes prepared in the PolyPrev with polyMPC and PEG decreased bovine serum albumin fouling and Escherichia coli attachment. This study demonstrates that by restricting antifouling chemistries from attaching within the pores of membranes, we can generate high-performance, antifouling membranes appropriate for a wide range of water treatment applications without compromising intrinsic transport properties.

Polymer Particles with a Low Glass Transition Temperature Containing Thermoset Resin Enable Powder Coatings at Room Temperature

Epoxy-based powder coatings are an attractive alternative to solvent-borne coatings. Here, in-house synthesized low glass transition temperature (T_g) particles containing epoxy resin and polymethyl methacrylate formed coatings at room temperature upon impact with a surface. Suspension polymerization was used to prepare particles as a function of diglycidyl ether of bisphenol A (DGEBA) and methyl methacrylate ratios. Higher incorporation of DGEBA decreased the T_g to below ~20°C and eliminated the need to heat the particles and/or aluminum substrates to form coatings. Using an electrostatic powder coating apparatus, a ~70% particle deposition efficiency was achieved on aluminum substrates heated to 200°C. Whereas, at room temperature, high-speed single particle impact experiments proved that particle bonding occurred at a critical velocity of 438 m/s, comparable to commercial cold spray technologies. The in-house synthesized particles used in this study hold potential in traditional and emerging additive manufacturing applications.

Mechanical Properties and Concentrations of Poly(ethylene glycol) in Hydrogels and Brushes Direct the Surface Transport of Staphylococcus aureus

Surface-associated transport of flowing bacteria, including cell rolling, is a mechanism for otherwise immobile bacteria to migrate on surfaces and could be associated with biofilm formation or the spread of infection. This work demonstrates how the moduli and/or local polymer concentration play critical roles in sustaining contact, dynamic adhesion, and transport of bacterial cells along a hydrogel or hydrated brush surface. In particular, stiffer more concentrated hydrogels and brushes maintained the greatest dynamic contact, still allowing cells to travel along the surface in flow. This study addressed how the mechanical properties, molecular architectures, and thicknesses of minimally adhesive poly(ethylene glycol) (PEG)-based coatings influence the flow-driven surface motion of Staphylococcus aureus MS2 cells. Three protein-repellant PEG-dimethylacrylate hydrogel films (∼100 μm thick) and two protein-repellant PEG brushes (8-16 nm thick) were sufficiently fouling-resistant to prevent the accumulation of flowing bacteria. However, the rolling or hopping-like motions of gently flowing S. aureus cells along the surfaces were specific to the particular hydrogel or brush, distinguishing these coatings in terms of their mechanical properties (with moduli from 2 to 1300 kPa) or local PEG concentrations (in the range 10-50% PEG). On the stiffer hydrogel coatings having higher PEG concentrations, S. aureus exhibited long runs of surface rolling, 20-50 μm in length, an increased tendency of cells to repeatedly return to some surfaces after rolling and escaping, and relatively long integrated contact times. By contrast, on the softer more dilute hydrogels, bacteria tended to encounter the surface for brief periods before escaping without return. The dynamic adhesion and motion signatures of the cells on the two brushes were bracketed by those on the soft and stiff hydrogels, demonstrating that PEG coating thickness was not important in these studies where the vertically oriented surfaces minimized the impact of gravitational forces. Control studies with similarly sized poly(ethylene oxide)-coated rigid spherical microparticles, that also did not arrest on the PEG coatings, established that the bacterial skipping and rolling signatures were specific to the S. aureus cells and not simply diffusive. Dynamic adhesion of the S. aureus cells on the PEG hydrogel surfaces correlated well with quiescent 24 h adhesion studies in the literature, despite the orientation of the flow studies that eliminated the influence of gravity on bacteria-coating normal forces.

Cross-platform mechanical characterization of lung tissue

Published data on the mechanical strength and elasticity of lung tissue is widely variable, primarily due to differences in how testing was conducted across individual studies. This makes it extremely difficult to find a benchmark modulus of lung tissue when designing synthetic extracellular matrices (ECMs). To address this issue, we tested tissues from various areas of the lung using multiple characterization techniques, including micro-indentation, small amplitude oscillatory shear (SAOS), uniaxial tension, and cavitation rheology. We report the sample preparation required and data obtainable across these unique but complimentary methods to quantify the modulus of lung tissue. We highlight cavitation rheology as a new method, which can measure the modulus of intact tissue with precise spatial control, and reports a modulus on the length scale of typical tissue heterogeneities. Shear rheology, uniaxial, and indentation testing require heavy sample manipulation and destruction; however, cavitation rheology can be performed in situ across nearly all areas of the lung with minimal preparation. The Young's modulus of bulk lung tissue using micro-indentation (1.4±0.4 kPa), SAOS (3.3±0.5 kPa), uniaxial testing (3.4±0.4 kPa), and cavitation rheology (6.1±1.6 kPa) were within the same order of magnitude, with higher values consistently reported from cavitation, likely due to our ability to keep the tissue intact. Although cavitation rheology does not capture the non-linear strains revealed by uniaxial testing and SAOS, it provides an opportunity to measure mechanical characteristics of lung tissue on a microscale level on intact tissues. Overall, our study demonstrates that each technique has independent benefits, and each technique revealed unique mechanical features of lung tissue that can contribute to a deeper understanding of lung tissue mechanics.

Gecko-Inspired Biocidal Organic Nanocrystals Initiated from a Pencil-Drawn Graphite Template

The biocidal properties of gecko skin and cicada wings have inspired the synthesis of synthetic surfaces decorated with high aspect ratio nanostructures that inactivate microorganisms. Here, we investigate the bactericidal activity of oriented zinc phthalocyanine (ZnPc) nanopillars grown using a simple pencil-drawn graphite templating technique. By varying the evaporation time, nanopillars initiated from graphite that was scribbled using a pencil onto silicon substrates were optimized to yield a high inactivation of the Gram-negative bacteria, Escherichia coli. We next adapted the procedure so that analogous nanopillars could be grown from pencil-drawn graphite scribbled onto stainless steel, flexible polyimide foil, and glass substrates. Time-dependent bacterial cytotoxicity studies indicate that the oriented nanopillars grown on all four substrates inactivated up to 97% of the E. coli quickly, in 15 min or less. These results suggest that organic nanostructures, which can be easily grown on a broad range of substrates hold potential as a new class of biocidal surfaces that kill microbes quickly and potentially, without spreading antibiotic-resistance genes.

Fouling-Resistant Hydrogels Prepared by the Swelling-Assisted Infusion and Polymerization of Dopamine

Biofilm-associated infections stemming from medical devices are increasingly challenging to treat due to the spread of antibiotic resistance. In this study, we present a simple strategy that significantly enhances the antifouling performance of covalently crosslinked poly(ethylene glycol) (PEG) and physically crosslinked agar hydrogels by incorporation of the fouling-resistant polymer zwitterion, poly(2-methacryloyloxyethyl phosphorylcholine) (pMPC). Dopamine polymerization was initiated during swelling of the hydrogels, which provided dopamine and pMPC an osmotic driving force into the hydrogel interior. Both PEG and agar hydrogels were synthesized over a broad range of storage moduli (1.7,1300 kPa), which remained statistically equivalent after being functionalized with pMPC and polydopamine (PDA). When challenged with fibrinogen, a model blood-clotting protein, the pMPC/PDA-functionalized PEG and agar hydrogels displayed a >90% reduction in protein adsorption compared to hydrogel controls. Further, greater than an order-of-magnitude reduction in Escherichia coli and Staphylococcus aureus adherence was observed. This study demonstrates a versatile materials platform to enhance the fouling resistance of hydrogels through a pMPC/PDA incorporation strategy that is independent of the chemical composition and network structure of the original hydrogel.

Current and Emerging Approaches to Engineer Antibacterial and Antifouling Electrospun Nanofibers

From ship hulls to bandages, biological fouling is a ubiquitous problem that impacts a wide range of industries and requires complex engineered solutions. Eliciting materials to have antibacterial or antifouling properties describes two main approaches to delay biofouling by killing or repelling bacteria, respectively. In this review article, we discuss how electrospun nanofiber mats are blank canvases that can be tailored to have controlled interactions with biologics, which would improve the design of intelligent conformal coatings or freestanding meshes that deliver targeted antimicrobials or cause bacteria to slip off surfaces. Firstly, we will briefly discuss the established and emerging technologies for addressing biofouling through antibacterial and antifouling surface engineering, and then highlight the recent advances in incorporating these strategies into electrospun nanofibers. These strategies highlight the potential for engineering electrospun nanofibers to solicit specific microbial responses for human health and environmental applications.

Bioinspired Photocatalytic Shark-Skin Surfaces with Antibacterial and Antifouling Activity via Nanoimprint Lithography

By combining antifouling shark-skin patterns with antibacterial titanium dioxide (TiO₂) nanoparticles (NPs), we present a simple route toward producing durable multifunctional surfaces that decrease microbial attachment and inactivate attached microorganisms. Norland Optical Adhesive, a UV-crosslinkable adhesive material, was loaded with 0, 10, or 50 wt % TiO₂ NPs from which shark-skin microstructures were imprinted using solvent-assisted soft nanoimprint lithography on a poly(ethylene terephthalate) (PET) substrate. To obtain coatings with an exceptional durability and an even higher concentration of TiO₂ NPs, a solution containing 90 wt % TiO₂ NPs and 10 wt % tetraethyl orthosilicate was prepared. These ceramic shark-skin-patterned surfaces were fabricated on a PET substrate and were quickly cured, requiring only 10 s of near infrared (NIR) irradiation. The water contact angle and the mechanical, antibacterial, and antifouling characteristics of the shark-skin-patterned surfaces were investigated as a function of TiO₂ composition. Introducing TiO₂ NPs increased the contact angle hysteresis from 30 to 100° on shark-skin surfaces. The hardness and modulus of the films were dramatically increased from 0.28 and 4.8 to 0.49 and 16 GPa, respectively, by creating ceramic shark-skin surfaces with 90 wt % TiO₂ NPs. The photocatalytic shark-skin-patterned surfaces reduced the attachment of Escherichia coli by ∼70% compared with smooth films with the same chemical composition. By incorporating as low as 10 wt % TiO₂ NPs into the chemical matrix, over 95% E. coli and up to 80% Staphylococcus aureus were inactivated within 1 h UV light exposure because of the photocatalytic properties of TiO₂. The photocatalytic shark-skin-patterned surfaces presented here were fabricated using a solution-processable and roll-to-roll compatible technique, enabling the production of large-area high-performance coatings that repel and inactivate bacteria.

Bacterial Adhesion Is Affected by the Thickness and Stiffness of Poly(ethylene glycol) Hydrogels

Despite lacking visual, auditory, and olfactory perception, bacteria sense and attach to surfaces. Many factors, including the chemistry, topography, and mechanical properties of a surface, are known to alter bacterial attachment, and in this study, using a library of nine protein-resistant poly(ethylene glycol) (PEG) hydrogels immobilized on glass slides, we demonstrate that the thickness or amount of polymer concentration also matters. Hydrated atomic force microscopy and rheological measurements corroborated that thin (15 μm), medium (40 μm), and thick (150 μm) PEG hydrogels possessed Young's moduli in three distinct regimes, soft (20 kPa), intermediate (300 kPa), and stiff (1000 kPa). The attachment of two diverse bacteria, flagellated Gram-negative Escherichia coli and nonmotile Gram-positive Staphylococcus aureus was assessed after a 24 h incubation on the nine PEG hydrogels. On the thickest PEG hydrogels (150 μm), E. coli and S. aureus attachment increased with increasing hydrogel stiffness. However, when the hydrogel's thickness was reduced to 15 μm, a substantially greater adhesion of E. coli and S. aureus was observed. Twelve times fewer S. aureus and eight times fewer E. coli adhered to thin-soft hydrogels than to thick-soft hydrogels. Although a full mechanism to explain this behavior is beyond the scope of this article, we suggest that because the Young's moduli of thin-soft and thick-soft hydrogels were statistically equivalent, potentially, the very stiff underlying glass slide was causing the thin-soft hydrogels to feel stiffer to the bacteria. These findings suggest a key takeaway design rule; to optimize fouling-resistance, hydrogel coatings should be thick and soft.

Antifouling Stripes Prepared from Clickable Zwitterionic Copolymers

In this study, we have fabricated robust patterned surfaces that contain biocompatible and antifouling stripes, which cause microorganisms to consolidate into bare silicon spaces. Copolymers of methacryloyloxyethyl phosphorylcholine (MPC) and a methacrylate-substituted dihydrolipoic acid (DHLA) were spin-coated onto silicon substrates. The MPC units contributed biocompatibility and antifouling properties, and the DHLA units enabled cross-linking and the formation of robust thin films. Photolithography enabled the formation of 200-μm-wide poly(MPC-DHLA) stripped patterns that were characterized using atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and rhodamine 6G staining. Regardless of the spacing between poly(MPC-DHLA) stripes (10, 50, or 100 μm), Escherichia coli rapidly adhered to the bare silicon gaps that lacked the copolymer, confirming the antifouling nature of MPC. Overall, this work provides a surface modification strategy for generating alternating biofouling and nonfouling surface structures that are potentially applicable for researchers studying cell biology, drug screening, and biosensor technology.

Complex Coacervation: Chemically Stable Fibers Electrospun from Aqueous Polyelectrolyte Solutions

In this study, we provide the first demonstration that aqueous complex coacervates can be electrospun into chemically robust polyelectrolyte complex (PEC) fiber mats. PECs form due to electrostatic complexation between oppositely charged polymers. Here, we exploit the ability of salt to plasticize PECs, thus enabling the electrospinning of solid fibers. Electrospinning solutions were composed of a pair of strong polyelectrolytes, poly(4-styrenesulfonic acid, sodium salt) and poly(diallyldimethylammonium chloride) using potassium bromide as the plasticizing salt. We systematically investigated the effect of salt concentration and electrospinning apparatus parameters on fiber formation. Electrospun PEC fiber mats were stable over a wide range of pH values, ionic strength conditions, and many organic solvents. This study demonstrates that the electrospinning of aqueous complex coacervates can generate chemically robust, free-standing PEC fiber mats while circumventing the reliance on organic solvents, the challenge of working with entangled polyelectrolytes in solution, and the need to chemically cross-link the as-spun fibers. These PEC fiber mats hold potential in applications where environmentally benign fiber mats are imperative, such as tissue engineering scaffolds and water purification technologies.

Ultrafiltration Membranes Enhanced with Electrospun Nanofibers Exhibit Improved Flux and Fouling Resistance

In this study, we have improved membrane performance by enhancing ultrafiltration membranes with electrospun nanofibers. The high-porosity nanofiber layer provides a tailorable platform that does not affect the base membrane structure. To decouple the effects that nanofiber chemistry and morphology have on membrane performance, two polymers commonly used in the membrane industry, cellulose and polysulfone, were electrospun into a layer that was 50 μm thick and consisted of randomly accumulated 1-μm-diameter fibers. Fouling resistance was improved and selectivity was retained by ultrafiltration membranes enhanced with a layer of either cellulose or polysulfone nanofibers. Potentially because of their better mechanical integrity, the polysulfone nanofiber-membranes demonstrated a higher pure-water permeance across a greater range of transmembrane pressures than the cellulose nanofiber-membranes and control membranes. This work demonstrates that nanofiber-enhanced membranes hold potential as versatile materials platforms for improving the performance of ultrafiltration membranes.

Antifouling Electrospun Nanofiber Mats Functionalized with Polymer Zwitterions

In this study, we exploit the excellent fouling resistance of polymer zwitterions and present electrospun nanofiber mats surface functionalized with poly(2-methacryloyloxyethyl phosphorylcholine) (polyMPC). This zwitterionic polymer coating maximizes the accessibility of the zwitterion to effectively limit biofouling on nanofiber membranes. Two facile, scalable methods yielded a coating on cellulose nanofibers: (i) a two-step sequential deposition featuring dopamine polymerization followed by the physioadsorption of polyMPC, and (ii) a one-step codeposition of polydopamine (PDA) with polyMPC. While the sequential and codeposited nanofiber mat assemblies have an equivalent average fiber diameter, hydrophilic contact angle, surface chemistry, and stability, the topography of nanofibers prepared by codeposition were smoother. Protein and microbial antifouling performance of the zwitterion modified nanofiber mats along with two controls, cellulose (unmodified) and PDA coated nanofiber mats were evaluated by dynamic protein fouling and prolonged bacterial exposure. Following 21 days of exposure to bovine serum albumin, the sequential nanofiber mats significantly resisted protein fouling, as indicated by their 95% flux recovery ratio in a water flux experiment, a 300% improvement over the cellulose nanofiber mats. When challenged with two model microbes Escherichia coli and Staphylococcus aureus for 24 h, both zwitterion modifications demonstrated superior fouling resistance by statistically reducing microbial attachment over the two controls. This study demonstrates that, by decorating the surfaces of chemically and mechanically robust cellulose nanofiber mats with polyMPC, we can generate high performance, free-standing nanofiber mats that hold potential in applications where antifouling materials are imperative, such as tissue engineering scaffolds and water purification technologies.

Graphene-based microfluidics for serial crystallography

Microfluidic strategies to enable the growth and subsequent serial crystallographic analysis of micro-crystals have the potential to facilitate both structural characterization and dynamic structural studies of protein targets that have been resistant to single-crystal strategies. However, adapting microfluidic crystallization platforms for micro-crystallography requires a dramatic decrease in the overall device thickness. We report a robust strategy for the straightforward incorporation of single-layer graphene into ultra-thin microfluidic devices. This architecture allows for a total material thickness of only ∼1 μm, facilitating on-chip X-ray diffraction analysis while creating a sample environment that is stable against significant water loss over several weeks. We demonstrate excellent signal-to-noise in our X-ray diffraction measurements using a 1.5 μs polychromatic X-ray exposure, and validate our approach via on-chip structure determination using hen egg white lysozyme (HEWL) as a model system. Although this work is focused on the use of graphene for protein crystallography, we anticipate that this technology should find utility in a wide range of both X-ray and other lab on a chip applications.

Polyelectrolyte-Functionalized Nanofiber Mats Control the Collection and Inactivation of Escherichia coli

Quantifying the effect that nanofiber mat chemistry and hydrophilicity have on microorganism collection and inactivation is critical in biomedical applications. In this study, the collection and inactivation of Escherichia coli K12 was examined using cellulose nanofiber mats that were surface-functionalized using three polyelectrolytes: poly (acrylic acid) (PAA), chitosan (CS), and polydiallyldimethylammonium chloride (pDADMAC). The polyelectrolyte functionalized nanofiber mats retained the cylindrical morphology and average fiber diameter (~0.84 µm) of the underlying cellulose nanofibers. X-ray photoelectron spectroscopy (XPS) and contact angle measurements confirmed the presence of polycations or polyanions on the surface of the nanofiber mats. Both the control cellulose and pDADMAC-functionalized nanofiber mats exhibited a high collection of E. coli K12, which suggests that mat hydrophilicity may play a larger role than surface charge on cell collection. While the minimum concentration of polycations needed to inhibit E. coli K12 was 800 µg/mL for both CS and pDADMAC, once immobilized, pDADMAC-functionalized nanofiber mats exhibited a higher inactivation of E. coli K12, (~97%). Here, we demonstrate that the collection and inactivation of microorganisms by electrospun cellulose nanofiber mats can be tailored through a facile polyelectrolyte functionalization process.

Underwater Superoleophobic Surfaces Prepared from Polymer Zwitterion/Dopamine Composite Coatings

Hydration is central to mitigating surface fouling by oil and microorganisms. Immobilization of hydrophilic polymers on surfaces promotes retention of water and a reduction of direct interactions with potential foulants. While conventional surface modification techniques are surface-specific, mussel-inspired adhesives based on dopamine effectively coat many types of surfaces and thus hold potential as a universal solution to surface modification. Here, we describe a facile, one-step surface modification strategy that affords hydrophilic, and underwater superoleophobic, coatings by the simultaneous deposition of polydopamine (PDA) with poly(methacryloyloxyethyl phosphorylcholine) (polyMPC). The resultant composite coating features enhanced hydrophilicity (i.e., water contact angle of ~10° in air) and antifouling performance relative to PDA coatings. PolyMPC affords control over coating thickness and surface roughness, and results in a nearly 10 fold reduction in Escherichia coli adhesion relative to unmodified glass. The substrate-independent nature of PDA coatings further promotes facile surface modification without tedious surface pretreatment, and offers a robust template for codepositing polyMPC to enhance biocompatibility, hydrophilicity and fouling resistance.

Antimicrobial Activity of Silver Ions Released from Zeolites Immobilized on Cellulose Nanofiber Mats

In this study, we exploit the high silver ion exchange capability of Linde Type A (LTA) zeolites and present, for the first time, electrospun nanofiber mats decorated with in-house synthesized silver (Ag(+)) ion exchanged zeolites that function as molecular delivery vehicles. LTA-Large zeolites with a particle size of 6.0 μm were grown on the surface of the cellulose nanofiber mats, whereas LTA-Small zeolites (0.2 μm) and three-dimensionally ordered mesoporous-imprinted (LTA-Meso) zeolites (0.5 μm) were attached to the surface of the cellulose nanofiber mats postsynthesis. After the three zeolite/nanofiber mat assemblies were ion-exchanged with Ag(+) ions, their ion release profiles and ability to inactivate Escherichia coli (E. coli) K12 were evaluated as a function of time. LTA-Large zeolites immobilized on the nanofiber mats displayed more than an 11 times greater E. coli K12 inactivation than the Ag-LTA-Large zeolites that were not immobilized on the nanofiber mats. This study demonstrates that by decorating nanometer to micrometer scale Ag(+) ion-exchanged zeolites on the surface of high porosity, hydrophilic cellulose nanofiber mats, we can achieve a tunable release of Ag(+) ions that inactivate bacteria faster and are more practical to use in applications over powder zeolites.