Investigation on the mechanical performances of ternary nylon 6/SEBS elastomer/nano-SiO2hybrid composites with controlled morphology

Morphology, Mechanical Properties and Shape Memory Effects of Polyamide12/Polyolefin Elastomer Blends Compatibilized by Glycidylisobutyl POSS

Small amounts of glycidylisobutyl polyhedral oligomericsilsesquioxane (G-POSS) (up to 10 phr) were added into a immiscible polyamide12 (PA12)/polyolefin elastomer (POE) blend (70 wt%/30 wt%) by simple melt mixing. The effects of the G-POSS on phase morphology and mechanical properties were investigated by FE-SEM, tensile testing, Izod impact test and dynamic mechanical analysis. FE-SEM analysis revealed that domain size of the dispersed POE phase in matrix PA12 is decreased significantly by adding the G-POSS, indicating a compatibilization effect of the G-POSS for the immiscible PA12/POE blend. The PA12/POE blend compatibilized with POSS showed simultaneous enhancement in mechanical properties including tensile modulus, strength and toughness. Further, thermally triggered shape memory effect was observed in this compatibilized blend.

The Role of Interfacial Interactions on the Functional Properties of Ethylene-Propylene Copolymer Containing SiO2 Nanoparticles

In this paper, the mechanical properties, thermal stability, and transparency of ethylene-propylene copolymer (EPC) elastomer modified with various weight percentages (1, 3, and 5 wt.%) of SiO₂ nanofillers have been studied. The nanocomposites were prepared via a simple melt mixing method. The morphological results revealed that the nanofillers were uniformly dispersed in the elastomer, where a low concentration of SiO₂ (1 wt.%) had been added into the elastomer. The FTIR showed that there are interfacial interactions between EPC matrix and silanol groups of SiO₂ nanoparticles. Moreover, by the addition of 1 wt.% of SiO₂ in the EPC, the tensile strength and elongation at break of EPC increased by about 38% and 27%, respectively. Finally, all samples were optically transparent, and the transparency of the nanocomposites reduced by increasing the content of SiO₂ nanoparticles.