Removal of heavy-metal ions by magnetic beads containing triazole chelating groups

Regulating valence states of CuFe-PBA for the simultaneous electrochemical detection of Cd2+, Pb2+ and Hg2+ in food application

Prussian blue analogues, as prospective electrode materials, play a crucial role in detecting heavy metal ions (HMIs), a process closely related to their electron transfer capacities and active surfaces. Here, etched copper-iron Prussian blue analogues (CuFe-PBA) are synthesized through a combination of flash nanoprecipitation (FNP) and an alkali etching process. Furthermore, this study investigates the impact of ammonia on the electronic structure of CuFe-PBA and its electrochemical detection capabilities for HMIs. The etched CuFe-PBA (e-CuFe-PBA) exhibits excellent detection performance for Cd2+, Pb2+ and Hg2+ with 17.6 μA μM-1, 24.2 μA μM-1 and 26.2 μA μM-1, respectively, due to the fact that the ammonia etching not only modulates the electronic properties of the surface of CuFe-PBA but also reduces the degree of agglomeration and enhances the accessible surface area. Additionally, it demonstrates excellent stability and resistance to interference, having been successfully applied to detect HMIs in food samples such as preserved eggs and apple juice. These results provide a new strategy for the use of Prussian blue analogues as electrochemical sensors for food safety applications.

Arsenate Anion-π Interactions on Amine-Modified Polydivinylbenzene in Aqueous Systems: Experimental and Theoretical Investigation

Anion-π interactions aiding in the adsorption of anions in the solution phase, though challenging to quantify, have attracted a lot of attention in supramolecular chemistry. We present the design of a polymer adsorbent that quantifies the adsorption of arsenate ions experimentally by optimizing anion-π interactions in a purely aqueous system and use density functional theory to compare these results with theoretical data. Arsenate anions are removed from water by amine-functionalized polydivinylbenzene using the comonomer 1-vinyl-1,2,4-triazole, which was cross-linked with divinylbenzene via radical polymerization in a hydrothermal procedure. The amine-functionalized polydivinylbenzene successfully removed arsenate anions from water with a capacity of 46 mg g-1, a 70% increase compared to the nonfunctionalized polydivinylbenzene (27 mg g-1) capacity under the same conditions. Adsorption is best described by the Sips isotherm model with a correlation coefficient R2 factor of 0.99, indicating that adsorption sites are homogeneous, and adsorption occurred by forming a monolayer. Kinetic studies indicated that adsorption is second order in the amine-functionalized polydivinylbenzene. Computational studies using density functional theory showed that the 1-vinyl-1,2,4-triazole comonomer improved the thermodynamic stability of the anionic-π interactions of polydivinylbenzene with arsenate anions. Electrostatic interactions dominate the mechanism of adsorption in polydivinylbenzene compared to the anion-induced interactions that dominate adsorption in amine-functionalized polydivinylbenzene.

MOFs-based Fe@YAU-101/GCE electrochemical sensor platform for highly selective detecting trace multiplex heavy metal ions

The construction of sensors with specific recognition functions can easily, sensitively and efficiently detect heavy metal ions, which is a demand in the field of electrochemical sensing and an important topic in the detection of environmental pollutants. An electrochemical sensor based on MOFs composites was developed for sensing of multiplex metal ions. The large surface area, adjustable porosities and channels in MOFs facilitate successful loading of sufficient quantities highly active units. The active units and pore structures of MOFs are regulated and synergetic with each other to enhance the electrochemical activity of MOFs composites. Thus, the selectivity, sensitivity and reproducibility of MOFs composites have been improved. Fortunately, after characterization, Fe@YAU-101/GCE sensor with strong signal was successfully constructed. In the presence of target metal ions in solution, the Fe@YAU-101/GCE can efficiently and synchronously identify Hg²⁺, Pb²⁺, and Cd²⁺. The detection limits (LOD) are 6.67 × 10^-10 M(Cd²⁺), 3.33 × 10^-10 M(Pb²⁺) and 1.33 × 10^-8 M (Hg²⁺), and are superior to the permissible limits set by the National Environmental Protection Agency. The electrochemical sensor is simple without sophisticated instrumentation and testing processes, hence promising for practical applications.

Water treatment using stimuli-responsive polymers

Stimuli-responsive polymers are a new category of smart materials used in water treatment via a stimuli-induced purification process and subsequent regeneration processes.

Thymine-Functionalized Gold Nanoparticles (Au NPs) for a Highly Sensitive Fiber-Optic Surface Plasmon Resonance Mercury Ion Nanosensor

Mercury ion (Hg²⁺) is considered to be one of the most toxic heavy metal ions. Once the content of Hg²⁺ exceeds the quality standard in drinking water, the living environment and health of human beings will be threatened and destroyed. Therefore, the establishment of simple and efficient methods for Hg²⁺ ion detection has important practical significance. In this paper, we present a highly sensitive and selective fiber-optic surface plasmon resonance (SPR) Hg²⁺ ion chemical nanosensor by designing thymine (T)-modified gold nanoparticles (Au NPs/T) as the signal amplification tags. Thymine-1-acetic acid (T-COOH) was covalently coupled to the surface of 2-aminoethanethiol (AET)-modified Au NPs and Au film by 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride/N-Hydroxysuccinimide (EDC/NHS) activation effect, respectively. In the presence of Hg²⁺ ions, the immobilized thymine combines specifically with Hg²⁺ ions, and forms an Au/thymine-Hg²⁺-thymine/Au (Au/T-Hg²⁺-T/Au) complex structure, leading to a shift in SPR wavelength due to the strong electromagnetic couple between Au NPs and Au film. Under optimal conditions, the proposed sensor was found to be highly sensitive to Hg²⁺ in the range of 80 nM–20 µM and the limit of detection (LOD) for Hg²⁺ was as low as 9.98 nM. This fiber-optic SPR sensor afforded excellent selectivity for Hg²⁺ ions against other heavy metal ions such as Fe³⁺, Cu²⁺, Ni²⁺, Ba²⁺, K⁺, Na⁺, Pb²⁺, Co²⁺, and Zn²⁺. In addition, the proposed sensor was successfully applied to Hg²⁺ assay in real environmental samples with excellent recovery. Accordingly, considering its simple advantages, this novel strategy provides a potential platform for on-site determination of Hg²⁺ ions by SPR sensor.

Bifunctional MOFs-Based Ratiometric Electrochemical Sensor for Multiplex Heavy Metal Ions

In this study, a ratiometric electrochemical sensor based on metal-organic frameworks (MOFs) was developed for sensing of multiplex metal ions. The bifunctional MOFs were prepared in a way to integrate two signal tags and a detection probe. In the presence of target metal ions, the target metal ions can replace the framework metal-ion center in the original MOFs through an ion-exchange reaction, leading to ratiometric electrochemical signals under different applied potentials. One consisted of the Cu²⁺ signal generated from electroactive MOFs selected as internal reference signals. The other consisted of the signal induced by other target metal ions. Using the I_metal ions/I_Cu²⁺ signal as the output, the prepared ratiometric probe was able to eliminate disturbance caused by the sensing environment. Moreover, the large surface area and abundant active sites in MOFs produced a multiplex ratiometric electrochemical sensor with improved characteristics in terms of reproducibility, stability, and sensitivity. The sensor was also simple without sophisticated instrumentation, amplification processes, or an acid dissolution/preconcentration procedure, hence promising for practical applications.

Colorimetric Sensor Array Based on Amino Acid-Modified Gold Nanoparticles for Toxic Metal Ion Detection in Water

Several chromatographic and spectroscopic methods are available for the detection of toxic mercury (Hg²⁺) in water; however simple, rapid, inexpensive, and sensitive methods are still needed. In this chapter, we describe a facile, very sensitive, and rapid method for the colorimetric detection of Hg²⁺ in water with the detection limit of 2.9 nM. This simple procedure is based on the lysine-induced aggregation of citrate-capped gold nanoparticles (AuNPs) in the presence of Hg²⁺ ions.

Molecular Imprinted Based Quartz Crystal Microbalance Nanosensors for Mercury Detection

Mercury(II) ions are emerging as a result of more human activity, especially coal-fired power plants, industrial processes, waste incineration plants, and mining. The mercury found in different forms after spreading around diffuses the nature of other living things. Although the damage to health is not yet clear, it is obvious that it is the cause of many diseases. This work detects the problem of mercury(II) ions, one of the active pollutants in wastewater. For this purpose, it is possible to detect the smallest amount of mercury(II) ions by means of the mercury(II) ions suppressed quartz crystal microbalance nanosensor developed. Zinc(II) and cadmium(II) ions are chosen as competitor elements. Developed nanosensor technology is known as the ideal method in the laboratory environment to detect mercury(II) ions from wastewater because of its low cost and precise result orientation. The range of linearity and the limit of detection are measured as 0.25 × 10-9-50 × 10-9 m. The detection limit is found to be 0.21 × 10-9 m. The mercury(II) ions imprinted nanosensors prepared according to the obtained experimental findings show high selectivity and sensitivity to detect mercury(II) ions from wastewater.

Analyte-triggered autocatalytic amplification combined with gold nanoparticle probes for colorimetric detection of heavy-metal ions

This work reports a new colorimetric nanosensor for the detection of heavy-metal ions that initially integrates analyte-triggered autocatalytic amplification with o-phenylenediamine-mediated aggregation of label-free gold nanoparticles. Its utility is well demonstrated with the simple, rapid, sensitive, and specific detection of Hg²⁺, Cu²⁺, and Ag⁺ targets with detection limits less than 3 nM.

Luminescent turn-on detection of Hg(II) via the quenching of an iridium(III) complex by Hg(II)-mediated silver nanoparticles

A novel luminescent turn-on detection method for Hg(II) was developed. The method was based on the silver nanoparticle (AgNP)-mediated quenching of Ir(III) complex 1. The addition of Hg(II) ions causes the luminescence of complex 1 to be recovered due to the oxidation of AgNPs by Hg(II) ions to form Ag(I) and Ag/Hg amalgam. The luminescence intensity of 1 increased in accord with an increased Hg(II) concentration ranging from 0 nM to 180 nM, with the detection limit of 5 nM. This approach offers an innovative method for the quantification of Hg(II).

Removal of heavy metal ions from wastewaters using dendrimer-functionalized multi-walled carbon nanotubes

Dendrimer-functionalized multi-walled carbon nanotubes (MWCNT) for heavy metal ion removal from wastewaters were developed. Triazole dendrimers (TD) were built directly onto the carbon nanotube surface by successive click chemistry reactions affording the zero- and first-generation dendrimer-functionalized MWCNT (MWCNT-TD1 and MWCNT-TD2). The Moedritzer-Irani reaction carried out on the amino groups present on the MWCNT-TD2 sample gave the corresponding α-aminophosphonate nanosystem MWCNT-TD2P. Both MWCNT-TD2 and MWCNT-TD2P nanosystems have been characterized by physical, chemical, and morphological analyses. Their chelating abilities towards the toxic metal ions Pb²⁺, Hg²⁺, and Ni²⁺ and the harmless Ca²⁺ ion have been experimentally evaluated in the two different sets of experiments and at the salt concentrations of 1 mg/mL or 1 μg/mL by inductively coupled plasma mass spectrometry (ICP-MS). The results of these studies pointed out the interesting chelating behavior for the phosphonated nanosystem towards the Hg²⁺ ion. The complexation mode of the best chelating system MWCNT-TD2P with mercury was investigated through density functional theory (DFT) calculations, suggesting a chelation mechanism involving the two oxygen atoms of the phosphate group. The synthesized dendrimers, supported on the multi-walled carbon nanotubes, have shown the potential to be used for the selective toxic metal ion removal and recovery.

Reversible and easy post-crosslinking method for developing a surface ion-imprinted hypercrosslinked monolith for specific Cd(ii) ion removal from aqueous solutions

In this study, a new surface imprinting technique for preparing a hypercrosslinked monolith to selectively remove Cd(ii) ions out from aqueous solutions was proposed.

Biosorption and Diffusion Modeling of Pb(II) by Malt Bagasse

The removal of Pb(II) from water by biosorption processes onto malt bagasse was investigated and the kinetic and thermodynamic parameters were obtained; additionally a diffusion modeling was proposed. The characterization of malt bagasse was performed by FTIR and SEM/EDS. The experiments were conducted in batch system and an experimental design based response surface methodology was applied for agitation speed and pH optimization. The kinetics of biosorption followed pseudo-second-order model and the temperature of the process affected the biosorption capacity. Isotherm models of Langmuir, Freundlich, and Elovich were applied and the Langmuir model showed better fit and the estimated biosorption capacity was 29.1 mg g−1. The negative values obtained for ΔG° and positive values of ΔH° confirm, respectively, the spontaneous and endothermic nature of the process. The diffusion modeling was performed based on experiments in the absence of agitation to investigate the influence of the biosorbent on the sorption process of Pb(II) ions.

Efficient biosorption of lead(II) and cadmium(II) ions from aqueous solutions by functionalized cell with intracellular CaCO3 mineral scaffolds

The functionalized Saccharomyces cerevisiae cell with biogenic intracellular CaCO3 mineral scaffold, synthesized via a simple and environmentally friendly approach, was efficient for removing lead (II) and cadmium (II) ions from aqueous solutions. The CaCO3 mineral scaffold could promote the uptake of the heavy metal ions and increase the biosorption capabilities of the adsorbent. Compared with the Freundlich isotherm, Langmuir model more fitted the equilibrium data. The maximum removal capacity of functionalized cells for Pb(II) and Cd(II) was 116.69 and 42.63mgg(-1), respectively. Further investigation showed that the adsorbent had high removal efficiency for trace amount of heavy metal ions. Adsorption data were modeled using the pseudo-first-order, pseudo-second-order and intra-particle diffusion kinetics equations. The results indicated that pseudo-second-order kinetic equation and intra-particle diffusion model could better describe the adsorption kinetics. The heavy metal ions might be removed by functionalized cells via membrane transport of metal ions and precipitation transformation.

Growth-dissolution-regrowth transitions of Fe3O4 nanoparticles as building blocks for 3D magnetic nanoparticle clusters under hydrothermal conditions

Magnetic nanoparticle clusters (MNCs) are a class of secondary structural materials that comprise chemically defined nanoparticles assembled into clusters of defined size. Herein, MNCs are fabricated through a one-pot solvothermal reaction featuring self-limiting assembly of building blocks and the controlled reorganization process. Such growth-dissolution-regrowth fabrication mechanism overcomes some limitations of conventional solvothermal fabrication methods with regard to restricted available feature size and structural complexity, which can be extended to other oxides (as long as one can be chelated by EDTA-2Na). Based on this method, the nanoparticle size of MNCs is tuned between 6.8 and 31.2 nm at a fixed cluster diameter of 120 nm, wherein the critical size for superparamagnetic-ferromagnetic transition is estimated from 13.5 to 15.7 nm. Control over the nature and secondary structure of MNCs gives an excellent model system to understand the nanoparticle size-dependent magnetic properties of MNCs. MNCs have potential applications in many different areas, while this work evaluates their cytotoxicity and Pb(2+) adsorption capacity as initial application study.

Removal of diethyl phthalate from aqueous phase using magnetic poly(EGDMA-VP) beads

The barium hexaferrite (BaFe(12)O(19)) containing magnetic poly(ethylene glycol dimethacrylate-vinyl pyridine), (mag-poly(EGDMA-VP)) beads (average diameter=53-212 μm) were synthesized and characterized. Their use as an adsorbent in the removal of diethyl phthalate (DEP) from an aqueous solution was investigated. The mag-poly(EGDMA-VP) beads were prepared by copolymerizing of 4-vinyl pyridine (VP) with ethylene glycol dimethacrylate (EGDMA). The mag-poly(EGDMA-VP) beads were characterized by N(2) adsorption/desorption isotherms (BET), vibrating sample magnetometer (VSM), X-ray powder diffraction (XRD), elemental analysis, scanning electron microscope (SEM) and swelling studies. At a fixed solid/solution ratio, the various factors affecting the adsorption of DEP from aqueous solutions such as pH, initial concentration, contact time and temperature were analyzed. The maximum DEP adsorption capacity of the mag-poly(EGDMA-VP) beads was determined as 98.9 mg/g at pH 3.0, 25°C. All the isotherm data can be fitted with both the Langmuir and the Dubinin-Radushkevich isotherm models. The pseudo first-order, pseudo-second-order, Ritch-second-order and intraparticle diffusion models were used to describe the adsorption kinetics. The thermodynamic parameters obtained indicated the exothermic nature of the adsorption. The DEP adsorption capacity did not change after 10 batch successive reactions, demonstrating the usefulness of the magnetic beads in applications.