Swelling behavior and structural characteristics of polyvinyl alcohol/montmorillonite nanocomposite hydrogels

Amoxicillin-loaded bionanocomposite hydrogels: swelling, dehydration, and in vitro drug release kinetics and mechanism

This study deals with preparing and characterizing polyvinyl alcohol/egg white/montmorillonite bionanocomposite hydrogels as antibacterial drug delivery systems. The cyclic freezing/thawing method was utilized to fabricate the hydrogels. To study the performance of the prepared hydrogels as drug delivery systems, amoxicillin, as a model antibiotic drug, was loaded into the hydrogels by mixing with the precursor polymer solution and gelation. From the diverse microstructural characterization techniques, i.e. XRD, SEM, AFM, DLS, and gel fraction estimation, it was possible to infer that montmorillonite has been successfully incorporated into the hydrogel network and acted as an additional crosslinker to bind the chains of egg white and polyvinyl alcohol. Scrutinizing the physical properties of the produced hydrogels demonstrated that increasing incorporated montmorillonite content adversely affects the prepared hydrogels' swelling ability and prolongs their dehydration period. Additionally, the Swelling characteristics of the hydrogels were evaluated at different pHs. Results showed an increase in the swelling ability of all samples by raising the pH value of the medium. Additionally, it was proved that both swelling and dehydration of the hydrogels follow non-Fickian diffusion. In vitro drug delivery experiments demonstrated that the cumulative fractional release of amoxicillin was adversely dependent on the amount of incorporated montmorillonite into the hydrogels and positively dependent on the pH of the release solution. It was also found that, in all examined samples, the mechanism by which the release of clindamycin happens is non-Fickian or anomalous transport.

Comparison of Structural, Water-Retaining and Sorption Properties of Acrylamide-Based Hydrogels Cross-Linked by Physical and Chemical Methods

Two series of hydrogels based on acrylamide and its copolymers with acrylonitrile and acrylic acid were synthesized by two cross-linking methods - chemical (using N,N'-methylene bis-acrylamide) and physical (using montmorillonite (MMT)) ones. The structure of the gels was characterized by Fourier Transform Infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The swelling and sorption properties were analyzed as a function of both the monomer composition and the cross-linking method. The shift of the band corresponding to Si-O (995-1030 cm-1 ) confirmed the formation of intercalation structures for MMT-cross-linked gels. Moreover, physically cross-linked gels demonstrated a non-monotonic dependence of the swelling degree on the MMT concentration, and acrylamide-acrylic acid copolymer MMT-cross-linked gels showed pH sensitivity and the highest swelling degree of 150 g/g. The highest sorption capacity towards cadmium(II) ions was demonstrated by acrylamide-acrylic acid copolymer gels, both covalently cross-linked (30 mg/g) and MMT-cross-linked (8.9 mg/g).

Ultrasmall Cu3(PO4)2 Nanoparticles Reinforced Hydrogel Membrane for Super-antifouling Oil/Water Emulsion Separation

Membrane fouling is a persistent and crippling challenge for oily wastewater treatment due to the high susceptibility of membranes to contamination. A feasible strategy is to design a robust and stable hydration layer on the membrane surface to prevent contaminates. A hydrogel illustrates a distinct category of materials with outstanding antifouling performance but is limited by its weak mechanical property. In this research, we report a reinforced hydrogel on a membrane by in situ growing ultrasmall hydrophilic Cu₃(PO₄)₂ nanoparticles in a copper alginate (CuAlg) layer via metal-ion-coordination-mediated mineralization. The embeddedness of hydrophilic Cu₃(PO₄)₂ nanoparticle with a size of 3-5 nm endows the CuAlg/Cu₃(PO₄)₂ composite hydrogel with enhanced mechanical property as well as reinforced hydrate ability. The as-prepared CuAlg/Cu₃(PO₄)₂ modified membrane exhibits a superior oil-repulsive property and achieves a nearly zero flux decline for separating surfactant stabilized oil-in-water emulsions with a high permeate flux up to ∼1330 L m^-2 h^-1 bar^-1. Notably, it is capable of keeping similar permeate flux for both pure water and oil-in-water emulsions during filtration, which is superior to the currently reported membranes, indicating its super-antifouling properties.

In vitro evaluation of injectable Tideglusib-loaded hyaluronic acid hydrogels incorporated with Rg1-loaded chitosan microspheres for vital pulp regeneration

Injectable systems receive attention in endodontics due to the complicated and irregular anatomical structure of root canals. Here, injectable Tideglusib (Td)-loaded hyaluronic acid hydrogels (HAH) incorporated with Rg1-loaded chitosan microspheres (CSM) were developed for vital pulp regeneration, providing release of Td and Rg1 to trigger odontoblastic differentiation of human dental pulp stem cells (DPSC) by Td and vascularization of pulp by Rg1. The optimal concentrations were determined as 90 nM and 50 μg/mL for Td and Rg1, and loaded in HA and CSM in HAH, respectively. Odontogenic (COL1A1, ALP, OCN, Axin-2, DSPP, and DMP1) and angiogenic (VEGFA, VEGFR2, and eNOS) differentiation of DPSC cultured in the presence of hydrogels was shown at gene expression level. Our results suggest that our injectable hydrogel formulation has potential to improve strategies for vital pulp regeneration. In vivo evaluations are needed to test the feasibility and potential of these hydrogels for vital pulp regeneration.

Stimuli-responsive cylindrical hydrogels mimic intestinal peristalsis to propel a solid object

The emerging field of soft robotics relies on soft, stimuli-responsive materials to enable load transport, manipulation, and mobility in complex unconstrained environments. These materials often need to replicate biological functionality such as muscle contractions and flexibility. Here we demonstrate a soft actuator prototype based on thermosensitive PNIPAAM hydrogels that can transport and manipulate objects. A hollow cylindrical hydrogel was selectively heated and cooled with Peltier devices to yield a traveling wave of shrinking and swelling akin to intestinal peristalsis. A 4 mm diameter bead was placed inside the cylinder and propelled 19.5 mm, equal to distance traveled by the peristaltic wave. We derived conditions that enable peristaltic transport as a function of transporter-cargo design parameters. We conclude that hydrogel-based peristaltic manipulators covering 2 orders of magnitude in stiffness (1-10(2) kPa) could transport cargo spanning 4 orders of magnitude in size (μm-m).

Seeing is believing, PLGA microsphere degradation revealed in PLGA microsphere/PVA hydrogel composites

The aim of this study was to understand the polymer degradation and drug release mechanism from PLGA microspheres embedded in a PVA hydrogel. Two types of microspheres were prepared with different molecular weight PLGA polymers (approximately 25 and 7 kDa) to achieve different drug release profiles, with a 9-day lag phase and without a lag phase, respectively. The kinetics of water uptake into the microspheres coincided with the drug release profiles for both formulations. For the 25 kDa microspheres, minimal water uptake was observed in the early part of the lag phase followed by substantial water uptake at the later stages and in the drug release phase. For the 7 kDa microspheres, water uptake occurred simultaneously with drug release. Water uptake was approximately 2-3 times that of the initial microsphere weight for both formulations. The internal structure of the PLGA microspheres was evaluated using low temperature scanning electron microscopy (cryo-SEM). Burst drug release occurred followed by pore forming from the exterior to the core of both microspheres. A well-defined hydrogel/microsphere interface was observed. For the 25 kDa microspheres, internal pore formation and swelling occurred before the second drug release phase. The surface layer of the microspheres remained intact whereas swelling, and degradation of the core continued throughout the drug release period. In addition, microsphere swelling reduced glucose transport through the coatings in PBS media and this was considered to be a as a consequence of the increased thickness of the coatings. The combination of the swelling and microdialysis results provides a fresh understanding on the competing processes affecting molecular transport of bioanalytes (i.e. glucose) through these composite coatings during prolonged exposure in PBS.

Recent advances in clay mineral-containing nanocomposite hydrogels

Clay mineral-containing nanocomposite hydrogels have been proven to have exceptional composition, properties, and applications, and consequently have attracted a significant amount of research effort over the past few years. The objective of this paper is to summarize and evaluate scientific advances in clay mineral-containing nanocomposite hydrogels in terms of their specific preparation, formation mechanisms, properties, and applications, and to identify the prevailing challenges and future directions in the field. The state-of-the-art of existing technologies and insights into the exfoliation of layered clay minerals, in particular montmorillonite and LAPONITE®, are discussed first. The formation and structural characteristics of polymer/clay nanocomposite hydrogels made from in situ free radical polymerization, supramolecular assembly, and freezing-thawing cycles are then examined. Studies indicate that additional hydrogen bonding, electrostatic interactions, coordination bonds, hydrophobic interaction, and even covalent bonds could occur between the clay mineral nanoplatelets and polymer chains, thereby leading to the formation of unique three-dimensional networks. Accordingly, the hydrogels exhibit exceptional optical and mechanical properties, swelling-deswelling behavior, and stimuli-responsiveness, reflecting the remarkable effects of clay minerals. With the pivotal roles of clay minerals in clay mineral-containing nanocomposite hydrogels, the nanocomposite hydrogels possess great potential as superabsorbents, drug vehicles, tissue scaffolds, wound dressing, and biosensors. Future studies should lay emphasis on the formation mechanisms with in-depth insights into interfacial interactions, the tactical functionalization of clay minerals and polymers for desired properties, and expanding of their applications.

Antibiotic eluting clay mineral (Laponite®) for wound healing application: an in vitro study

Different materials in form of sponge, hydrogel and film have been developed and formulated for treating and dressing burn wounds. In this study, the potential of Laponite, a gel forming clay, in combination with an antimicrobial agent (mafenide), as a wound dressing material was tested in vitro. Laponite/mafenide (Lap/Maf) hydrogel was formulated in three different ratios of Lap/Maf 1:1, 1:2, 1:3. Laponite/mafenide/alginate (Lap/Maf/Alg) film was also formulated by combining Lap/Maf gel (1:1) with alginate. Intercalation rate of mafenide into the layers of Laponite nanoparticles and physico-chemical properties, including wound dressing characteristics of materials were studied using various analytical methods. Furthermore, the degradation of materials and the release profile of mafenide were investigated in simulated wound exudates fluid and antibacterial effectiveness of the eluted mafenide was tested on a range of bacterial species. The cytotoxicity of materials was also evaluated in skin fibroblast culture. The results showed that mafenide molecules were intercalated between the nano-sized layers of Laponite. The eluted mafenide showed active antibacterial effects against all three tested bacteria. All intercalated mafenide released from Lap/Maf 1:1 and 1:2 gel formulations and nearly 80% release from 1:3 formulation during test period. No significant difference was observed in release profile of mafenide between Lap/Maf/Alg film and Lap/Maf formulations. Wound dressing tests on Lap/Maf/Alg film showed it is a breathable dressing and has capacity to absorb wound exudates. The study showed that prepared Lap/Maf composite has the potential to be used as an antibiotic eluting gel or film for wound healing application. Additionally, Laponite has shown benefits in wound healing processes by releasing Mg(2+) ions and thereby reducing the cytotoxic effect of mafenide on fibroblast cells.