Surface modification of PVDF membranes with sulfobetaine polymers for a stably anti-protein-fouling performance

Carboxybetaine functionalized nanosilicas as protein resistant surface coatings

Materials with protein resistant properties are increasingly sought after for their potential application as low-fouling surface coatings. Hydrophilic coatings with improved resistance to protein fouling have been prepared from zwitterionic carboxybetaine (CB) functionalized silica nanoparticles (SiNPs). The authors report three methods of coating preparation via direct tethering of CB to predeposited particle films, a two-step surface functionalization process, and deposition of CB functionalized particle dispersions. The pH at which aqueous CB solutions were prepared and reacted to SiNPs was found to drastically influence the mechanism of CB attachment and affect the protein resistance of the resultant coatings. Depending on the method of coating preparation, protein binding to functionalized particle coatings was reduced by up to 94% compared to unfunctionalized SiNP control surfaces. As a result, all three methods offer simple and scalable fabrication routes for the generation of hydrophilic, zwitterionic interfaces with improved inhibition to protein fouling.

Rational design of a zwitterionic–phosphonic copolymer for the surface antifouling modification of multiple biomedical metals

The relationship between the composition of the copolymer and the antifouling ability conferred to the metallic substrates has been established.

Antifouling enhancement of polyimide membrane by grafting DEDA-PS zwitterions

In order to improve the water flux and antifouling property of polyimide (PI) membrane, zwitterions are grafted on PI membrane surface via a two-step modification route by reactions with N,N-diethylethylenediamine (DEDA) and 1,3-propane sultone (PS) sequentially. The reaction mechanism and physicochemical properties of membranes are confirmed via various characterization techniques. The anti-biofouling performance of the zwitterion-grafted PI membranes is evaluated by bacterial suspension immersion tests in Escherichia coli (E. coli) and staphylococcus aureus (S. aureus) solutions. The antifouling property is assessed via the filtration test using the bovine serum albumin (BSA) and dodecyl trimethyl ammonium bromide (DTAB) aqueous feed solutions. The effect of the reaction time with DEDA in the zwitterion-grafted process on the antifouling property is further investigated systematically. The results show that both the anti-biofouling and antifouling performances of zwitterion-grafted PI membranes are significantly improved.

Biomimetic Principles to Develop Blood Compatible Surfaces

Functionalized biomaterial surface patterns capable of resisting nonspecific adsorption while retaining their bioactivity are crucial in the advancement of biomedical technologies, but currently available biomaterials intended for use in whole blood frequently suffer from nonspecific adsorption of proteins and cells, leading to a loss of activity over time. In this review, we address two concepts for the design and modification of blood compatible biomaterial surfaces, zwitterionic modification and surface functionalization with glycans – both of which are inspired by the membrane structure of mammalian cells – and discuss their potential for biomedical applications.

Constructing a zwitterionic ultrafiltration membrane surface via multisite anchorage for superior long-term antifouling properties

A novel zwitterionic membrane surface was constructed which exhibited stable antifouling ability by the formation of multisite anchorage covalent bonds.

Covalent deposition of zwitterionic polymer and citric acid by click chemistry-enabled layer-by-layer assembly for improving the blood compatibility of polysulfone membrane

Development of blood compatible membranes is critical for biomedical applications. Zwitterionic polymers have been proved to be resistant to nonspecific protein adsorption and platelet adhesion. In this work, two kinds of zwitterionic copolymers bearing alkynyl and azide groups are synthesized by atom transfer radical polymerization (ATRP) and subsequent reactions, namely alkynyl-poly(sulfobetaine methacrylate) (alkynyl-PSBMA) and azide-poly(sulfobetaine methacrylate) (azide-PSBMA). The copolymers are directly used to modify azido-functionalized polysulfone (PSf-N3) membrane via click chemistry-enabled layer-by-layer (LBL) assembly. Alkynyl-citric acid is then clicked onto the membrane when the outermost layer was azide-PSBMA. The chemical compositions, surface morphologies, and hydrophilicity of the zwitterionic polymer and citric acid multilayer modified membranes are characterized. The composite multilayer is resistant to protein adsorption and platelet adhesion and also prolongs clotting times, indicating that the blood compatibility is improved. Moreover, after clicking the small molecule anticoagulant alkynyl-citric acid onto the outermost of the zwitterionic multilayer, the membrane shows further improved anticoagulant property. The deposition of zwitterionic polymer and citric acid via click chemistry-enabled LBL assembly can improve the blood compatibility of the PSf membrane.

Preparation of Sulfobetaine-Grafted PVDF Hollow Fiber Membranes with a Stably Anti-Protein-Fouling Performance

Based on a two-step polymerization method, two sulfobetaine-based zwitterionic monomers, including 3-(methacryloylamino) propyl-dimethyl-(3-sulfopropyl) ammonium hydroxide (MPDSAH) and 2-(methacryloyloxyethyl) ethyl-dimethyl-(3-sulfopropyl) ammonium (MEDSA), were successfully grafted from poly(vinylidene fluoride) (PVDF) hollow fiber membrane surfaces in the presence of N,N′-methylene bisacrylamide (MBAA) as a cross-linking agent. The mechanical properties of the PVDF membrane were improved by the zwitterionic surface layers. The surface hydrophilicity of PVDF membranes was significantly enhanced and the polyMPDSAH-g-PVDF membrane showed a higher hydrophilicity due to the higher grafting amount. Compared to the polyMEDSA-g-PVDF membrane, the polyMPDSAH-g-PVDF membrane showed excellent significantly better anti-protein-fouling performance with a flux recovery ratio (RFR) higher than 90% during the cyclic filtration of a bovine serum albumin (BSA) solution. The polyMPDSAH-g-PVDF membrane showed an obvious electrolyte-responsive behavior and its protein-fouling-resistance performance was improved further during the filtration of the protein solution with 100 mmol/L of NaCl. After cleaned with a membrane cleaning solution for 16 days, the grafted MPDSAH layer on the PVDF membrane could be maintain without any chang; however, the polyMEDSA-g-PVDF membrane lost the grafted MEDSA layer after this treatment. Therefore, the amide group of sulfobetaine, which contributed significantly to the higher hydrophilicity and stability, was shown to be imperative in modifying the PVDF membrane for a stable anti-protein-fouling performance via the two-step polymerization method.

Nanomaterials for membrane fouling control: accomplishments and challenges

We report a review of recent research efforts on incorporating nanomaterials-including metal/metal oxide nanoparticles, carbon-based nanomaterials, and polymeric nanomaterials-into/onto membranes to improve membrane antifouling properties in biomedical or potentially medical-related applications. In general, nanomaterials can be incorporated into/onto a membrane by blending them into membrane fabricating materials or by attaching them to membrane surfaces via physical or chemical approaches. Overall, the fascinating, multifaceted properties (eg, high hydrophilicity, superparamagnetic properties, antibacterial properties, amenable functionality, strong hydration capability) of nanomaterials provide numerous novel strategies and unprecedented opportunities to fully mitigate membrane fouling. However, there are still challenges in achieving a broader adoption of nanomaterials in the membrane processes used for biomedical applications. Most of these challenges arise from the concerns over their long-term antifouling performance, hemocompatibility, and toxicity toward humans. Therefore, rigorous investigation is still needed before the adoption of some of these nanomaterials in biomedical applications, especially for those nanomaterials proposed to be used in the human body or in contact with living tissue/body fluids for a long period of time. Nevertheless, it is reasonable to predict that the service lifetime of membrane-based biomedical devices and implants will be prolonged significantly with the adoption of appropriate fouling control strategies.