Morphology, physical properties, silver release, and antimicrobial capacity of ionic silver-loaded poly(l-lactide) films of interest in food-coating applications

Hybrid Ethylcellulose Polymeric Films: Ag(I)-Based Components and Curcumin as Reinforcing Ingredients for Enhanced Food Packaging Properties

Bio-active ethylcellulose (EC) polymeric films have been obtained by incorporating curcumin (curc) and Ag(I)-based compounds, known for their antioxidant and antimicrobial activity, respectively, within the polymeric matrix. The recently reported Ag(I) coordination polymer, in both its structural forms (α-[(bpy)Ag(OTf)]∞ and β-{[(bpy)Ag][OTf]}∞), and the [(bpy)Ag(OTf)]∞-curc polymeric co-crystal (bpy=2,2'-bipyridine; OTf=trifluoromethanesulfonate) have been selected as Ag(I) species. The hybrid composite films have been prepared through the simple solvent casting method and characterized through Powder X-Ray Diffraction (PXRD), Differential Scanning Calorimetry (DSC) and Fourier Transform Infrared (FTIR) spectroscopy, Scanning Electron Microscope (SEM), UV-vis spectroscopy. The deep investigation of the film samples highlighted the non-inert behaviour of EC towards these specific active ingredients. Antimicrobial tests showed that EC films embedding the Ag(I)-based compounds present good antimicrobial performance, in particular against Staphylococcus aureus, used as a model of Gram-positive bacteria. In addition, Silver migration tests, performed on the Ag(I)-incorporating EC films, evidenced low values of silver release particularly in the case of the EC films incorporating [(bpy)Ag(OTf)]∞-curc.

Application of natural extracts as active ingredient in biopolymer based packaging systems

Active packaging systems come under novel techniques and are creating demands in food packaging aspects. They are specially designed for food products where shelf life is a key driving factor. Their wide range of functionality preserves the color, texture, smell, and taste of the food item retaining their freshness and edibility for longer than any other methods available on market. An active ingredient in packaging systems enables efficient consumable quality which resulted in reduced complaints from consumers. However, techniques must be inexpensive and environment-friendly. The use of biodegradable packaging systems reinforced by exploiting natural compounds forms the latest trend to attract consumer demand in substituting synthetic preservatives in foods that can protect against food spoilage. Natural extracts have gained commercial importance in active packaging nowadays for the delivery of safe and high-quality foods that are being employed in both fresh and processed produce. Development and use of innovative active packaging systems in varied forms are expected to increase in the future for food safety, quality, and stability. The review overviews the beneficial effects of plant acquired components in modulating product quality in packaged form for commercial aspects in the market.

Polymeric Materials with Antibacterial Activity: A Review

Infections caused by bacteria are one of the main causes of mortality in hospitals all over the world. Bacteria can grow on many different surfaces and when this occurs, and bacteria colonize a surface, biofilms are formed. In this context, one of the main concerns is biofilm formation on medical devices such as urinary catheters, cardiac valves, pacemakers or prothesis. The development of bacteria also occurs on materials used for food packaging, wearable electronics or the textile industry. In all these applications polymeric materials are usually present. Research and development of polymer-based antibacterial materials is crucial to avoid the proliferation of bacteria. In this paper, we present a review about polymeric materials with antibacterial materials. The main strategies to produce materials with antibacterial properties are presented, for instance, the incorporation of inorganic particles, micro or nanostructuration of the surfaces and antifouling strategies are considered. The antibacterial mechanism exerted in each case is discussed. Methods of materials preparation are examined, presenting the main advantages or disadvantages of each one based on their potential uses. Finally, a review of the main characterization techniques and methods used to study polymer based antibacterial materials is carried out, including the use of single force cell spectroscopy, contact angle measurements and surface roughness to evaluate the role of the physicochemical properties and the micro or nanostructure in antibacterial behavior of the materials.

Evaluation of New Antimicrobial Materials Incorporating Ethyl Lauroyl Arginate or Silver into Different Matrices, and Their Safety in Use as Potential Packaging

A big challenge for today’s industry is antimicrobial preservation and the safety of food. An effective solution to this problem can be a modern invention such as antimicrobial packaging. In the presented research the antimicrobial activity of two new active films incorporating silver, as IONPURE IPL, and ethyl lauroyl arginate (LAE) were evaluated, by employing a low-density polyethylene (LDPE) matrix and a biofilm material, respectively. Additionally, LAE was also incorporated into polystyrene (PS) pads by two different methods: by spraying and by immersion of the PS pads into an aqueous LAE solution. LDPE films containing silver did not show any antimicrobial activity against Escherichia coli and Aspergillus flavus, whereas the biofilm containing LAE reduced the growth of Salmonella enterica but did not inhibit Aspergillus flavus. The active PS pads, both sprayed and immersed in LAE solution, also showed antimicrobial activity, causing a reduction of 99.99% of Pseudomonas putida growth. Thermal treatment at 180 °C for 6 and 15 min did not modify the antimicrobial activity of LAE against Salmonella enterica. Moreover, inductively coupled plasma-mass spectrometry (ICP-MS) analysis was performed to check the migration of silver from developed material intended for food packaging applications into food simulant.

Migration and Degradation in Composting Environment of Active Polylactic Acid Bilayer Nanocomposites Films: Combined Role of Umbelliferone, Lignin and Cellulose Nanostructures

This study was dedicated to the functional characterization of innovative poly(lactic acid) (PLA)-based bilayer films containing lignocellulosic nanostructures (cellulose nanocrystals (CNCs) or lignin nanoparticles (LNPs)) and umbelliferone (UMB) as active ingredients (AIs), prepared to be used as active food packaging. Materials proved to have active properties associated with the antioxidant action of UMB and LNPs, as the combination of both ingredients in the bilayer formulations produced a positive synergic effect inducing the highest antioxidant capacity. The results of overall migration for the PLA bilayer systems combining CNCs or LNPs and UMB revealed that none of these samples exceeded the overall migration limit required by the current normative for food packaging materials in both non-polar and polar simulants. Finally, all the hydrophobic monolayer and bilayer films were completely disintegrated in composting conditions in less than 18 days of incubation, providing a good insight on the potential use of these materials for application as active and compostable food packaging.

Deposition of Copper on Poly(Lactide) Non-Woven Fabrics by Magnetron Sputtering-Fabrication of New Multi-Functional, Antimicrobial Composite Materials

The paper presents the method of synthesis; physico-technical and biological characterization of a new composite material (PLA–Cu⁰) obtained by sputter deposition of copper on melt-blown poly(lactide) (PLA) non-woven fabrics. The analysis of these biofunctionalized non-woven fabrics included: ultraviolet/visible (UV/VIS) transmittance; scanning electron microscopy/energy-dispersive spectroscopy (SEM/EDS); attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy; ability to block UV radiation; filtration parameters (air permeability); and tensile testing. The functionalized non-woven composite materials were subjected to antimicrobial tests against colonies of Gram-negative (Escherichia coli), Gram-positive (Staphylococcus aureus) bacteria and antifungal tests against the Chaetomium globosum fungal mould species. The antibacterial and antifungal activity of PLA–Cu⁰ suggests potential applications as an antimicrobial material.

Biofunctionalization of Textile Materials. 3. Fabrication of Poly(lactide)-Potassium Iodide Composites with Antifungal Properties

The paper presents a method of obtaining poly(lactide) (PLA) nonwoven fabrics with antifungal properties using potassium iodide as a nonwoven modifying agent. PLA nonwoven fabrics were obtained by the melt-blown technique and subsequently surface modified (PLA→PLA-SM-KI) by the dip-coating method. The analysis of these PLA-SM-KI (0.1%–2%) composites included Scanning Electron Microscopy (SEM), UV/VIS transmittance, FTIR spectrometry and air permeability. The nonwovens were subjected to microbial activity tests against Aspergillus niger fungal mold species, exhibiting substantial antifungal activity. The studies showed that PLA-KI hybrids containing 2% KI have appropriate mechanical properties, morphology and demanded antimicrobial properties to be further developed as a potential antimicrobial, biodegradable material.

Preparation and Characterization of Silver(I) Ethylcellulose Thin Films as Potential Food Packaging Materials

Ag(I)-containing ethylcellulose (EC) films suitable as antbacterial packaging materials have been prepared and fully characterized. Different preparation methods, including the use of green casting solvents, are proposed. The Ag(I) acylpyrazolonato complexes, [Ag(Q^py,CF3 )(L)], L=benzylimidazole (Bzim) and L=ethylimidazole (EtimH), used as active additives, display different modes of interactions with EC, depending on their structural features. A thorough investigation of the EC liquid-crystalline lyotropic phase and its changes with the introduction of silver additives, has been conducted, revealing either the inclusion of complex molecules into the inner structure of the EC matrix or their dispersion on its surface. Moreover, the bactericidal activity of the prepared Ag(I) films seems to be related to the interaction between silver additives and the polymeric EC matrix. Indeed, the EC-2b films show a particularly good performance even with a low silver content, with a relative bacterial killing of about 100 %. Tests for Ag(I) migration have been performed by using three food stimulants under two assay conditions. Low values of silver release are recorded, particularly at low concentration of silver content, in the case of all new prepared Ag(I) films.

Design and Characterization of PLA Bilayer Films Containing Lignin and Cellulose Nanostructures in Combination With Umbelliferone as Active Ingredient

Poly (lactic acid) (PLA) bilayer films, containing cellulose nanocrystals (CNC) or lignin nanoparticles (LNP) and Umbelliferone (UMB) were extruded and successfully layered by thermo-compression starting from monolayer films. Lignocellulosic nanostructures were used in PLA based film as nanofillers at 3 wt.%, while UMB was used as active ingredient (AI) at 15 wt.%. The effects of processing techniques, presence, typology and content of lignocellulosic nanoparticles have been analyzed and thermal, morphological, mechanical and optical characterization of PLA nanocomposites have been made. Furthermore, X-ray diffraction (XRD) and Fourier Transform Infrared spectroscopy (FTIR) studies evaluated the presence of nanofillers and AI at chemical level. Bilayer formulations showed a good interfacial adhesion and improved stress at break with respect of PLA monolayers, although they were less stretchable and transparent. Data obtained from thermal, colorimetric and transparency investigations underlined that the presence of lignocellulosic nanofillers and AI in PLA monolayer and bilayer films induced relevant alterations in terms of overall color properties and thermal stability, while antioxidant activity of umbelliferone was enhanced by the addition of lignin in produced materials.

Polymer-Based Surfaces Designed to Reduce Biofilm Formation: From Antimicrobial Polymers to Strategies for Long-Term Applications

Contact-active antimicrobial polymer surfaces bear cationic charges and kill or deactivate bacteria by interaction with the negatively charged parts of their cell envelope (lipopolysaccharides, peptidoglycan, and membrane lipids). The exact mechanism of this interaction is still under debate. While cationic antimicrobial polymer surfaces can be very useful for short-term applications, they lose their activity once they are contaminated by a sufficiently thick layer of adhering biomolecules or bacterial cell debris. This layer shields incoming bacteria from the antimicrobially active cationic surface moieties. Besides discussing antimicrobial surfaces, this feature article focuses on recent strategies that were developed to overcome the contamination problem. This includes bifunctional materials with simultaneously presented antimicrobial and protein-repellent moieties; polymer surfaces that can be switched from an antimicrobial, cell-attractive to a cell-repellent state; polymer surfaces that can be regenerated by enzyme action; degradable antimicrobial polymers; and antimicrobial polymer surfaces with removable top layers.