Effects of surface modification of carbon nanofibers on the mechanical properties of polyamide 1212 composites

Synthesis, surface modifications, and biomedical applications of carbon nanofibers: Electrospun vs vapor-grown carbon nanofibers

Engineered nanostructures are materials with promising properties, enabled by precise design and fabrication, as well as size-dependent effects. Biomedical applications of nanomaterials in disease-specific prevention, diagnosis, treatment, and recovery monitoring require precise, specific, and sophisticated approaches to yield effective and long-lasting favorable outcomes for patients. In this regard, carbon nanofibers (CNFs) have been indentified due to their interesting properties, such as good mechanical strength, high electrical conductivity, and desirable morphological features. Broadly speaking, CNFs can be categorized as vapor-grown carbon nanofibers (VGCNFs) and carbonized CNFs (e.g., electrospun CNFs), which have distinct microstructure, morphologies, and physicochemical properties. In addition to their physicochemical properties, VGCNFs and electrospun CNFs have distinct performances in biomedicine and have their own pros and cons. Indeed, several review papers in the literature have summarized and discussed the different types of CNFs and their performances in the industrial, energy, and composites areas. Crucially however, there is room for a comprehensive review paper dealing with CNFs from a biomedical point of view. The present work therefore, explored various types of CNFs, their fabrication and surface modification methods, and their applications in the different branches of biomedical engineering.

The Structural Evolution and Mechanical Properties of Semi-Aromatic Polyamide 12T after Stretching

The development of semi-aromatic polyamides with excellent mechanical properties has always been a popular research avenue. In this work, the semi-aromatic polyamide 12T (PA12T) with the maximum tensile strength of 465.5 MPa was prepared after stretching at 210 °C 4.6 times. Wide-angle X-ray diffraction (WAXD) and small-angle X-ray scattering (SAXS) were used to characterize the structural evolution of semi-aromatic polyamide 12T (PA12T) after stretching at different stretching temperatures and stretching ratios. The formation mechanism of this change in mechanical properties was investigated from different aspects of the aggregated structure such as crystal morphology, crystal orientation and crystallinity. The relevant characterization results show that the crystal structure, crystal orientation and crystallinity of PA12T were the highest when the sample was pre-stretched at 210 °C, which is crucial for improving the mechanical properties of PA12T. These findings will provide important guidance for the preparation of polymer materials with excellent mechanical properties.

Low-cost disposable Poly(ethyleneimine)-Functionalized Carbon Nanofibers Coated Cellulose Paper as efficient solid phase extraction sorbent material for the extraction of Parahydroxybenzoates from environmental waters

Parahydroxybenzoates (parabens) are considered as emerging environmental contaminants because of their extensive usage in our daily life products, causing parabens contamination into environmental water systems and lead to toxic effects on environmental health. This study describes a greener extraction method using a new cationic polymer poly (ethyleneimine) functionalized acid-treated carbon nanofibers (PEI-CNFs) coated cellulose paper (CP) as solid-phase extraction (SPE) sorbent material for the extraction of parabens from environmental water samples. The fabrication of PEI-CNFs modified CP was confirmed using field-emission scanning electron microscope, transmission electron microscopy, and fourier-transformer infrared spectroscopy techniques. Various factors affecting the adsorption and desorption of parabens on PEI-CNFs@CP and its extraction efficiencies were studied using HPLC-UV analysis. Under the optimal experimental conditions, maximum extraction efficiencies were achieved for four target parabens, and PEI-CNFs@CP/HPLC-UV method exhibited excellent linearities ranged from 0.5-50 ng mL^-1 with regression coefficient values were between 0.9952-0.9970. The presented method showed good sensitivity with quantification limits between 0.5-0.75 ng mL^-1 and detection limits between 0.1-0.25 ng mL^-1. The developed technique was applied for the real sample analysis (river, lake, domestic sewage water, and drinking tap water). The spiked recovery revealed good recoveries between 86.8-116.0% with RSD less than 8.8% for all the water samples. These results proved that it a simple, fast, efficient, low-cost, and eco-friendly method for the extraction and determination of parabens in environmental water samples and can be applied as a routine analytical tool in environmental monitoring and quality control laboratories.