In-situformation of metal nanoparticle/acrylic polymer hybrid and its application to miniemulsion polymerization

Polymeric ionic liquids containing copper(I) and copper(II) ions as gas chromatographic stationary phases for olefin separations

Copper(I) ions (Cu+) are used in olefin separations due to their olefin complexing ability and low cost, but their instability in the presence of water and gases limits their widespread use. Ionic liquids (ILs) have emerged as stabilizers of Cu+ ions and prevent their degradation, providing high olefin separation efficiency. There is limited understanding into the role that polymeric ionic liquids (PILs), which possess similar structural characteristics to ILs, have on Cu+ ion-olefin interactions. Moreover, copper ions with diverse oxidation states, including Cu+ and Cu2+ ions, have been rarely employed for olefin separations. In this study, gas chromatography (GC) is used to investigate the interaction strength of olefins to stationary phases composed of the 1-hexyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ([C6MIM+][NTf2-]) IL and the poly(1-hexyl-3-vinylimidazolium [NTf2-]) (poly([C6VIM+][NTf2-])) PIL containing monovalent and divalent copper salts (i.e., [Cu+][NTf2-] and [Cu2+]2[NTf2-]). The chromatographic retention of alkenes, alkynes, dienes, and aromatic compounds was examined. Incorporation of the [Cu2+]2[NTf2-] salt into a stationary phase comprised of poly(dimethylsiloxane) resulted in strong retention of olefins, while its addition to the [C6MIM+][NTf2-] IL and poly([C6VIM+][NTf2-]) PIL allowed for the interaction strength to be modulated. Olefins exhibited greater affinities toward IL and PIL stationary phases containing the [Cu2+]2[NTf2-] salt compared to those with the [Cu+][NTf2-] salt. Elimination of water from both copper salts was observed to be an important factor in promoting olefin interactions, as evidenced by increased olefin retention upon exposure of the stationary phases to high temperatures. To evaluate the long-term thermal stability of the stationary phase, chromatographic retention of probes was measured on the [Cu2+]2[NTf2-]/[C6MIM+][NTf2-] IL stationary phase after its exposure to helium at a temperature of 110 °C.

Comparison of olefin/paraffin separation by ionic liquid and polymeric ionic liquid stationary phases containing silver(I) ion using one-dimensional and multidimensional gas chromatography

Silver(I) ions have been used in various studies as components within polymer membranes or ionic liquids (ILs) to enable separation of olefins from paraffins. Polymeric ionic liquids (PILs) are a class of polymers synthesized from IL monomers and typically possess higher thermal and chemical stability than the ILs from which they are formed. Until now, very little is known about the difference in strength of silver(I) ion-olefin interactions when they take place in an IL compared to a PIL. In this work, the chromatographic separation of olefins by stationary phases composed of silver(I) bis[(trifluoromethyl)sulfonyl]imide ([Ag⁺][NTf₂^-]) incorporated into the 1-hexyl-3-methylimidazolium NTf₂ ([HMIM⁺][NTf₂^-]) IL and poly(1-hexyl-3-vinylimidazolium NTf₂) (poly([HVIM⁺][NTf₂^-])) PIL at varying concentrations was investigated. Olefins were more highly retained by silver(I) ions in PILs than in ILs as the silver(I) salt concentration in the stationary was increased. The potential separation power of silver(I)-containing IL and PIL stationary phases in comprehensive two-dimensional gas chromatography (GC×GC) was compared to the conventional one-dimensional system. The separation selectivity of alkenes and alkynes from paraffins was significantly increased, while dienes and aromatic compounds showed insignificant changes in retention. The chemical structural features of IL and PIL that enhance silver(I) ion stability and olefin separation were investigated by using silver(I) trifluoromethanesulfonate ([Ag⁺][OTf^-]), 1-decyl-3-methylimidazolium NTf₂ ([DMIM⁺][NTf₂^-]) IL, poly(1-decyl-3-vinylimidazolium NTf₂ (poly([DVIM⁺][NTf₂^-])) PIL, [HMIM⁺][OTf^-] IL and poly([HVIM⁺][OTf^-]) PIL. Longer alkyl substituents appended to the IL (and PIL) cation increased the strength of silver(I) olefin interaction, and [OTf^-] anions in the IL (and PIL) tended to preserve silver(I) ion from thermal reduction, while also retaining olefins less than the [NTf₂^-]-containing columns. In general, silver(I) ions in PILs possessing analogous chemical structures to ILs exhibited higher silver(I) ion-olefin interaction strength but were less thermally stable.

Polymer particles filled with multiple colloidal silica via in situ sol-gel process and their thermal property

The in situ formation of dielectric silica (SiO₂) particles was carried out in the presence of temperature-responsive poly(N-isopropylacrylamide) particles. Unlike the typical sol-gel method used to prepare various SiO₂ particles, the highly uniform growth of SiO₂ particles was achieved within the cross-linked polymer particles (i.e., the polymer particles were filled with the SiO₂ particles) simply by utilizing interfacial interactions, including the van der Waals attractive force and hydrogen bonding in nanoscale environments. The structural and morphological features as well as the thermal behaviors of these composites were thoroughly examined by electron microscopes, dynamic light scattering, and thermal analyzers. In particular, the thermal properties of these composites were completely different from the bare polymer, SiO₂ particles, and their mixtures, which clearly suggested the successful incorporation of multiple SiO₂ particles within the cross-linked polymer particles. Similarly, titanium oxide (TiO₂) particles were easily embedded within the polymer particle template which exhibited improved overall properties. As a whole, understanding in situ formation of nanoscale inorganic particles within polymer particle templates can allow for designing novel composite materials possessing enhanced chemical and physical properties.