1
|
Ricci C, Azimi B, Panariello L, Antognoli B, Cecchini B, Rovelli R, Rustembek M, Cinelli P, Milazzo M, Danti S, Lazzeri A. Assessment of Electrospun Poly(ε-caprolactone) and Poly(lactic acid) Fiber Scaffolds to Generate 3D In Vitro Models of Colorectal Adenocarcinoma: A Preliminary Study. Int J Mol Sci 2023; 24:ijms24119443. [PMID: 37298394 DOI: 10.3390/ijms24119443] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/29/2023] [Revised: 05/16/2023] [Accepted: 05/24/2023] [Indexed: 06/12/2023] Open
Abstract
Three-dimensional scaffold-based culture has been increasingly gaining influence in oncology as a therapeutic strategy for tumors with a high relapse percentage. This study aims to evaluate electrospun poly(ε-caprolactone) (PCL) and poly(lactic acid) (PLA) scaffolds to create a 3D model of colorectal adenocarcinoma. Specifically, the physico-mechanical and morphological properties of PCL and PLA electrospun fiber meshes collected at different drum velocities, i.e., 500 rpm, 1000 rpm and 2500 rpm, were assessed. Fiber size, mesh porosity, pore size distribution, water contact angle and tensile mechanical properties were investigated. Caco-2 cells were cultured on the produced PCL and PLA scaffolds for 7 days, demonstrating good cell viability and metabolic activity in all the scaffolds. A cross-analysis of the cell-scaffold interactions with morphological, mechanical and surface characterizations of the different electrospun fiber meshes was carried out, showing an opposite trend of cell metabolic activity in PLA and PCL scaffolds regardless of the fiber alignment, which increased in PLA and decreased in PCL. The best samples for Caco-2 cell culture were PCL500 (randomly oriented fibers) and PLA2500 (aligned fibers). Caco-2 cells had the highest metabolic activity in these scaffolds, with Young's moduli in the range of 8.6-21.9 MPa. PCL500 showed Young's modulus and strain at break close to those of the large intestine. Advancements in 3D in vitro models of colorectal adenocarcinoma could move forward the development of therapies for this cancer.
Collapse
Affiliation(s)
- Claudio Ricci
- Department of Civil and Industrial Engineering, University of Pisa, Largo L. Lazzarino 2, 56126 Pisa, Italy
| | - Bahareh Azimi
- Department of Civil and Industrial Engineering, University of Pisa, Largo L. Lazzarino 2, 56126 Pisa, Italy
| | - Luca Panariello
- Department of Civil and Industrial Engineering, University of Pisa, Largo L. Lazzarino 2, 56126 Pisa, Italy
| | - Benedetta Antognoli
- Department of Civil and Industrial Engineering, University of Pisa, Largo L. Lazzarino 2, 56126 Pisa, Italy
| | - Beatrice Cecchini
- Department of Civil and Industrial Engineering, University of Pisa, Largo L. Lazzarino 2, 56126 Pisa, Italy
| | - Roberta Rovelli
- Department of Civil and Industrial Engineering, University of Pisa, Largo L. Lazzarino 2, 56126 Pisa, Italy
| | - Meruyert Rustembek
- Department of Civil and Industrial Engineering, University of Pisa, Largo L. Lazzarino 2, 56126 Pisa, Italy
| | - Patrizia Cinelli
- Department of Civil and Industrial Engineering, University of Pisa, Largo L. Lazzarino 2, 56126 Pisa, Italy
- Centre for Instrumentation Sharing of University of Pisa (CISUP), Lungarno Pacinotti 43/44, 56126 Pisa, Italy
| | - Mario Milazzo
- Department of Civil and Industrial Engineering, University of Pisa, Largo L. Lazzarino 2, 56126 Pisa, Italy
- Centre for Instrumentation Sharing of University of Pisa (CISUP), Lungarno Pacinotti 43/44, 56126 Pisa, Italy
| | - Serena Danti
- Department of Civil and Industrial Engineering, University of Pisa, Largo L. Lazzarino 2, 56126 Pisa, Italy
- Centre for Instrumentation Sharing of University of Pisa (CISUP), Lungarno Pacinotti 43/44, 56126 Pisa, Italy
| | - Andrea Lazzeri
- Department of Civil and Industrial Engineering, University of Pisa, Largo L. Lazzarino 2, 56126 Pisa, Italy
- Centre for Instrumentation Sharing of University of Pisa (CISUP), Lungarno Pacinotti 43/44, 56126 Pisa, Italy
| |
Collapse
|
2
|
Azimi B, Maleki H, Zavagna L, De la Ossa JG, Linari S, Lazzeri A, Danti S. Bio-Based Electrospun Fibers for Wound Healing. J Funct Biomater 2020; 11:E67. [PMID: 32971968 PMCID: PMC7563280 DOI: 10.3390/jfb11030067] [Citation(s) in RCA: 94] [Impact Index Per Article: 23.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/22/2020] [Revised: 09/10/2020] [Accepted: 09/14/2020] [Indexed: 12/16/2022] Open
Abstract
Being designated to protect other tissues, skin is the first and largest human body organ to be injured and for this reason, it is accredited with a high capacity for self-repairing. However, in the case of profound lesions or large surface loss, the natural wound healing process may be ineffective or insufficient, leading to detrimental and painful conditions that require repair adjuvants and tissue substitutes. In addition to the conventional wound care options, biodegradable polymers, both synthetic and biologic origin, are gaining increased importance for their high biocompatibility, biodegradation, and bioactive properties, such as antimicrobial, immunomodulatory, cell proliferative, and angiogenic. To create a microenvironment suitable for the healing process, a key property is the ability of a polymer to be spun into submicrometric fibers (e.g., via electrospinning), since they mimic the fibrous extracellular matrix and can support neo- tissue growth. A number of biodegradable polymers used in the biomedical sector comply with the definition of bio-based polymers (known also as biopolymers), which are recently being used in other industrial sectors for reducing the material and energy impact on the environment, as they are derived from renewable biological resources. In this review, after a description of the fundamental concepts of wound healing, with emphasis on advanced wound dressings, the recent developments of bio-based natural and synthetic electrospun structures for efficient wound healing applications are highlighted and discussed. This review aims to improve awareness on the use of bio-based polymers in medical devices.
Collapse
Affiliation(s)
- Bahareh Azimi
- Interuniversity National Consortium of Materials Science and Technology (INSTM), 50121 Florence, Italy; (B.A.); (L.Z.); (A.L.)
- Department of Civil and Industrial Engineering, University of Pisa, 56126 Pisa, Italy
| | - Homa Maleki
- Department of Carpet, University of Birjand, Birjand 9717434765, Iran
| | - Lorenzo Zavagna
- Interuniversity National Consortium of Materials Science and Technology (INSTM), 50121 Florence, Italy; (B.A.); (L.Z.); (A.L.)
| | | | | | - Andrea Lazzeri
- Interuniversity National Consortium of Materials Science and Technology (INSTM), 50121 Florence, Italy; (B.A.); (L.Z.); (A.L.)
- Department of Civil and Industrial Engineering, University of Pisa, 56126 Pisa, Italy
| | - Serena Danti
- Interuniversity National Consortium of Materials Science and Technology (INSTM), 50121 Florence, Italy; (B.A.); (L.Z.); (A.L.)
- Department of Civil and Industrial Engineering, University of Pisa, 56126 Pisa, Italy
| |
Collapse
|
3
|
Rosellini E, Lazzeri L, Maltinti S, Vanni F, Barbani N, Cascone MG. Development and characterization of a suturable biomimetic patch for cardiac applications. JOURNAL OF MATERIALS SCIENCE. MATERIALS IN MEDICINE 2019; 30:126. [PMID: 31728643 DOI: 10.1007/s10856-019-6327-6] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/24/2019] [Accepted: 11/03/2019] [Indexed: 06/10/2023]
Abstract
3D scaffolds used to repair damaged tissues should be able to mimic both composition and functions of natural extracellular matrix, which is mainly composed of polysaccharides and proteins. In our previous research new biomimetic sponges, based on blends of alginate with gelatin, were produced and characterized for myocardial tissue engineering applications. It was observed that these scaffolds can potentially function as a promising cardiac extracellular matrix substitute, but a reinforcement is required to improve their suturing properties. Aim of the present work was the development of a suturable biomimetic patch by the inclusion of a synthetic mesh within an alginate/gelatin scaffold. The mesh, produced by dry spinning, was made of eight superimposed layers of polycaprolactone microfibers, each one rotated of 45° with respect to the adjacent one. Reinforced scaffolds were obtained through the use of a mold, specially designed to place the fibrous mesh exactly in the center of the sponge. Both the reinforcement mesh and the reinforced scaffold were characterized. A perfect integration between the mesh and the sponge was observed. The fibrous mesh reduced the capacity of the sponge to absorb water, but the degree of hydrophilicity of the material was still comparable with that of natural cardiac tissue. The reinforced system showed a suitable stability in aqueous environment and it resulted much more resistant to suturing than not reinforced scaffold and even than human arteries. Polycaprolactone mesh was not cytotoxic and the reinforced scaffold was able to support cardiomyocytes adhesion and proliferation. Overall, the obtained results confirmed that the choice to modify the alginate/gelatin sponges through the insertion of an appropriate reinforcement system turned out to be correct in view of their potential use in myocardial tissue engineering.
Collapse
Affiliation(s)
- Elisabetta Rosellini
- Department of Civil and Industrial Engineering (DICI), University of Pisa, Largo Lucio Lazzarino, 56126, Pisa, Italy
- Inter-University Center for the 3Rs Principles in Teaching & Research (Centro 3R), 56126, Pisa, Italy
| | - Luigi Lazzeri
- Department of Civil and Industrial Engineering (DICI), University of Pisa, Largo Lucio Lazzarino, 56126, Pisa, Italy
- Inter-University Center for the 3Rs Principles in Teaching & Research (Centro 3R), 56126, Pisa, Italy
| | - Simona Maltinti
- Department of Civil and Industrial Engineering (DICI), University of Pisa, Largo Lucio Lazzarino, 56126, Pisa, Italy
| | - Francesca Vanni
- Department of Civil and Industrial Engineering (DICI), University of Pisa, Largo Lucio Lazzarino, 56126, Pisa, Italy
| | - Niccoletta Barbani
- Department of Civil and Industrial Engineering (DICI), University of Pisa, Largo Lucio Lazzarino, 56126, Pisa, Italy
| | - Maria Grazia Cascone
- Department of Civil and Industrial Engineering (DICI), University of Pisa, Largo Lucio Lazzarino, 56126, Pisa, Italy.
- Inter-University Center for the 3Rs Principles in Teaching & Research (Centro 3R), 56126, Pisa, Italy.
| |
Collapse
|
4
|
Scaffaro R, Maio A, Botta L, Gulino EF, Gulli D. Tunable release of Chlorhexidine from Polycaprolactone-based filaments containing graphene nanoplatelets. Eur Polym J 2019. [DOI: 10.1016/j.eurpolymj.2018.11.031] [Citation(s) in RCA: 26] [Impact Index Per Article: 5.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/21/2023]
|