Improved catalytic activity by catalase immobilization using γ-cyclodextrin and electrospun PCL nanofibers

Enrofloxacin Pharmaceutical Formulations through the Polymer-Free Electrospinning of β-Cyclodextrin-oligolactide Derivatives

Enrofloxacin (ENR), a member of the fluoroquinolone class of antibiotics, is widely used in veterinary medicine to treat bacterial infections. Like many antibiotics, ENR has limited water solubility and low bioavailability. To address these challenges, drug formulations using solid dispersions, nanosuspensions, surfactants, cocrystal/salt formation, and inclusion complexes with cyclodextrins may be employed. The approach described herein proposes the development of ENR formulations by co-electrospinning ENR with custom-prepared cyclodextrin-oligolactide (CDLA) derivatives. This method benefits from the high solubility of these derivatives, enabling polymer-free electrospinning. The electrospinning parameters were optimized to incorporate significant amounts of ENR into the CDLA nanofibrous webs, reaching up to 15.6% by weight. The obtained formulations were characterized by FTIR and NMR spectroscopy methods and evaluated for their antibacterial activity against Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. This study indicates that the presence of CDLA derivative does not inhibit the antibacterial activity of ENR, recommending these formulations for further development.

Thiol-disulfide balance and trace element levels in patients with seasonal allergic rhinitis

Background

The prevalence of allergic diseases is gradually increasing worldwide. The most common such allergic disease is allergic rhinitis (AR).

Objective

The present study investigated the possible relationship between seasonal AR and the thiol-disulfide balance and zinc and copper levels in adult individuals.

Study Design and Methods

130 male and female adults were included in the study. The participants' serum thiol-disulfide balance and zinc and copper levels were measured spectrophotometrically using commercial kits. Statistical significance was accepted as p < 0.05 between the groups.

Results

The serum copper (p = 0.001), native thiol (p = 0.006), reduced thiol (p < 0.001), and thiol oxidation reduction ratio (p < 0.001) levels were significantly lower in the seasonal AR group than in the control group.

Conclusion

In AR patients, the low level of copper, which is an important trace element, the deterioration of the thiol-disulfide balance, which represents a unique indicator of the oxidant-antioxidant balance, the increased disulfide level caused by oxidative stress, and the decreased native thiol level can all serve as important biochemical markers.

Agomelatine protects heart and aorta against lipopolysaccharide-induced cardiovascular toxicity via inhibition of NF-kβ phosphorylation

The aim of this study was to investigate the possible ameliorating effects of agomelatine (AGO) on lipopolysaccharide (LPS)-induced endothelial and cardiac damage. Twenty-four female Wistar Albino rats divided into 3 groups as follows: Control, LPS and LPS + AGO. Total oxidant status (TOS), total antioxidant status (TAS), nuclear factor kappa beta (NF-kβ)/p65, p-NF-kβ, full caspase-8 (Cas-8) and cleaved cas-8 levels were measured in cardiac tissues and creatine kinase MB (CKMB), aspartate aminotransferase (AST), lactate dehydrogenase (LDH) levels in blood biochemically. In addition; cas-8, sirtuin-1 (SIRT-1), interleukin-4 (IL-4), interleukin-10 (IL-10), haptoglobin measured histopathologically in cardiac and aortic tissues. The levels of CKMB, AST, LDH and TOS were increased and TAS were decreased in the LPS group. In Western blot analyses NF-kβ/p65, p-NF-kβ/p65, full and cleaved cas-8 protein levels increased in cardiac tissues of LPS group. In histopathological and immunohistochemical evaluation of the heart sections; hyperemia, micro-hemorrhages and inflammatory cell infiltrations, increase of cas-8, haptoglobin, IL-4 and IL-10 and decrease of SIRT-1 levels were observed in cardiac and endothelial tissues of LPS groups. AGO treatment reversed all these parameters. It was shown that LPS-induced inflammation, oxidative stress and apoptosis via increasing of NF-kβ/p65 signaling, decreasing of SIRT-1 levels and increase of cas-8 levels in heart and endothelial tissues respectively. AGO corrected all these parameters by its antioxidant, antiinflammatory and antiapoptotic activities.

Facile synthesis of catalase@ZIF-8 composite by biomimetic mineralization for efficient biocatalysis

Enzymes immobilized in metal-organic frameworks (MOFs) have attracted great attention as a promising hybrid material. In the study, a novel biomimetic mineralization encapsulation process for a highly stable and easily reusable catalase (CAT)@ZIF-8 composite has been designed. This immobilization process provides a high enzyme loading of 70 wt %. The CAT@ZIF-8 composites exhibited a much lower K_m value and better enzyme activity than those of free CAT, exhibiting good stability against enzymatic hydrolysis and protein denaturation under harsh conditions. The inhibitory effects of pesticides such as pH, temperature, solvent (i.e., methanol, dimethyl sulfoxide and tetrahydrofuran) and storage at room temperature (6 months) on the activity of free and immobilized catalase enzyme were investigated. The CAT@MOF composites also exhibited excellent reusability, an obvious advantage for treating a wastewater from food processing. The CAT@MOF developed is promising for the efficient removal of H₂O₂ under harsh conditions.

A Comprehensive Review of the Covalent Immobilization of Biomolecules onto Electrospun Nanofibers

Biomolecule immobilization has attracted the attention of various fields such as fine chemistry and biomedicine for their use in several applications such as wastewater, immunosensors, biofuels, et cetera. The performance of immobilized biomolecules depends on the substrate and the immobilization method utilized. Electrospun nanofibers act as an excellent substrate for immobilization due to their large surface area to volume ratio and interconnectivity. While biomolecules can be immobilized using adsorption and encapsulation, covalent immobilization offers a way to permanently fix the material to the fiber surface resulting in high efficiency, good specificity, and excellent stability. This review aims to highlight the various covalent immobilization techniques being utilized and their benefits and drawbacks. These methods typically fall into two categories: (1) direct immobilization and (2) use of crosslinkers. Direct immobilization techniques are usually simple and utilize the strong electrophilic functional groups on the nanofiber. While crosslinkers are used as an intermediary between the nanofiber substrate and the biomolecule, with some crosslinkers being present in the final product and others simply facilitating the reactions. We aim to provide an explanation of each immobilization technique, biomolecules commonly paired with said technique and the benefit of immobilization over the free biomolecule.

What do we learn from enzyme behaviors in organic solvents? - Structural functionalization of ionic liquids for enzyme activation and stabilization

Enzyme activity in nonaqueous media (e.g. conventional organic solvents) is typically lower than in water by several orders of magnitude. There is a rising interest of developing new nonaqueous solvent systems that are more "water-like" and more biocompatible. Therefore, we need to learn from the current state of nonaqueous biocatalysis to overcome its bottleneck and provide guidance for new solvent design. This review firstly focuses on the discussion of how organic solvent properties (such as polarity and hydrophobicity) influence the enzyme activity and stability, and how these properties impact the enzyme's conformation and dynamics. While hydrophobic organic solvents usually lead to the maintenance of enzyme activity, solvents carrying functional groups like hydroxys and ethers (including crown ethers and cyclodextrins) can lead to enzyme activation. Ionic liquids (ILs) are designable solvents that can conveniently incorporate these functional groups. Therefore, we systematically survey these ether- and/or hydroxy-functionalized ILs, and find most of them are highly compatible with enzymes leading to high activity and stability. In particular, ILs carrying both ether and tert-alcohol groups are among the most enzyme-activating solvents. Future direction is to learn from enzyme behaviors in both water and nonaqueous media to design biocompatible "water-like" solvents.

Biocompatible Polymers Combined with Cyclodextrins: Fascinating Materials for Drug Delivery Applications

Cyclodextrins (CD) are a group of cyclic oligosaccharides with a cavity/specific structure that enables to form inclusion complexes (IC) with a variety of molecules through non-covalent host-guest interactions. By an elegant combination of CD with biocompatible, synthetic and natural polymers, different types of universal drug delivery systems with dynamic/reversible properties have been generated. This review presents the design of nano- and micro-carriers, hydrogels, and fibres based on the polymer/CD supramolecular systems highlighting their possible biomedical applications. Application of the most prominent hydrophobic aliphatic polyesters that exhibit biodegradability, represented by polylactide and polycaprolactone, is described first. Subsequently, particular attention is focused on materials obtained from hydrophilic polyethylene oxide. Moreover, examples are also presented for grafting of CD on polysaccharides. In summary, we show the application of host-guest interactions in multi-component functional biomaterials for controlled drug delivery.

Multi-point enzyme immobilization, surface chemistry, and novel platforms: a paradigm shift in biocatalyst design

Engineering enzymes with improved catalytic properties in non-natural environments have been concerned with their diverse industrial and biotechnological applications. Immobilization represents a promising but straightforward route, and immobilized biocatalysts often display higher activities and stabilities compared to free enzymes. Owing to their unique physicochemical characteristics, including the high-specific surface area, exceptional chemical, electrical, and mechanical properties, efficient enzyme loading, and multivalent functionalization, nano-based materials are postulated as suitable carriers for biomolecules or enzyme immobilization. Enzymes immobilized on nanomaterial-based supports are more robust, stable, and recoverable than their pristine counterparts, and are even used for continuous catalytic processes. Furthermore, the unique intrinsic properties of nanomaterials, particularly nanoparticles, also confer the immobilized enzymes to be used for their broader applications. Herein, an effort has been made to present novel potentialities of multi-point enzyme immobilization in the current biotechnological sector. Various nano-based platforms for enzyme/biomolecule immobilization are discussed in the second part of the review. In summary, recent developments in the use of nanomaterials as new carriers to construct robust nano-biocatalytic systems are reviewed, and future trends are pointed out in this article.

Aliphatic Polyester Nanofibers Functionalized with Cyclodextrins and Cyclodextrin-Guest Inclusion Complexes

The fabrication of nanofibers by electrospinning has gained popularity in the past two decades; however, only in this decade, have polymeric nanofibers been functionalized using cyclodextrins (CDs) or their inclusion complexes (ICs). By combining electrospinning of polymers with free CDs, nanofibers can be fabricated that are capable of capturing small molecules, such as wound odors or environmental toxins in water and air. Likewise, combining polymers with cyclodextrin-inclusion complexes (CD-ICs), has shown promise in enhancing or controlling the delivery of small molecule guests, by minor tweaking in the technique utilized in fabricating these nanofibers, for example, by forming core⁻shell or multilayered structures and conventional electrospinning, for controlled and rapid delivery, respectively. In addition to small molecule delivery, the thermomechanical properties of the polymers can be significantly improved, as our group has shown recently, by adding non-stoichiometric inclusion complexes to the polymeric nanofibers. We recently reported and thoroughly characterized the fabrication of polypseudorotaxane (PpR) nanofibers without a polymeric carrier. These PpR nanofibers show unusual rheological and thermomechanical properties, even when the coverage of those polymer chains is relatively sparse (~3%). A key advantage of these PpR nanofibers is the presence of relatively stable hydroxyl groups on the outer surface of the nanofibers, which can subsequently be taken advantage of for bioconjugation, making them suitable for biomedical applications. Although the number of studies in this area is limited, initial results suggest significant potential for bone tissue engineering, and with additional bioconjugation in other areas of tissue engineering. In addition, the behaviors and uses of aliphatic polyester nanofibers functionalized with CDs and CD-ICs are briefly described and summarized. Based on these observations, we attempt to draw conclusions for each of these combinations, and the relationships that exist between their presence and the functional behaviors of their nanofibers.

Electrospun Fibers of Cyclodextrins and Poly(cyclodextrins)

Cyclodextrins (CDs) can endow electrospun fibers with outstanding performance characteristics that rely on their ability to form inclusion complexes. The inclusion complexes can be blended with electrospinnable polymers or used themselves as main components of electrospun nanofibers. In general, the presence of CDs promotes drug release in aqueous media, but they may also play other roles such as protection of the drug against adverse agents during and after electrospinning, and retention of volatile fragrances or therapeutic agents to be slowly released to the environment. Moreover, fibers prepared with empty CDs appear particularly suitable for affinity separation. The interest for CD-containing nanofibers is exponentially increasing as the scope of applications is widening. The aim of this review is to provide an overview of the state-of-the-art on CD-containing electrospun mats. The information has been classified into three main sections: (i) fibers of mixtures of CDs and polymers, including polypseudorotaxanes and post-functionalization; (ii) fibers of polymer-free CDs; and (iii) fibers of CD-based polymers (namely, polycyclodextrins). Processing conditions and applications are analyzed, including possibilities of development of stimuli-responsive fibers.