Polypropylene composite reinforced with fibrillated curaua fiber and using maleic anhydride as coupling agent

Crystallization, Structures, and Properties of Different Polyolefins with Similar Grafting Degree of Maleic Anhydride

Maleic anhydride (MAH) grafting to different polyolefins with similar grafting degree can have different effects on crystallization, crystal structure, and mechanical and thermal properties. The grafting leads to a smaller crystal size, less ordered lamellar structure, and a shorter long period for HDPE, LLDPE, and PP. The grafting makes PP lamellar packing less ordered the most and almost no effect to LLDPE. The grafting does not have that much impact on the crystallization ability of the HDPE, LLDPE, and HDPE/PP blend, but appreciably reduces the crystalline ability of PP-g-MAH, due to a dramatical drop in its molecular weight during the grafting process. As a result, the grafting makes PP a very brittle material with a lowered average melting point than the corresponding neat PP, but the grafting has almost no effect on elongation at break for LLDPE and some effect on HDPE (decreased by one-third). However, the PP degradation due to MAH grafting can be avoided in the presence of PE component, i.e., making the grafting of PP and PE at the same time with HDPE/PP blend. The grafted HDPE/PP blend shows a significantly improved compatibility, which leads to overall appreciably better mechanical properties than the neat HDPE/PP blend.

Explorative Study on the Use of Curauá Reinforced Polypropylene Composites for the Automotive Industry

The automotive industry is under a growing volume of regulations regarding environmental impact and component recycling. Nowadays, glass fiber-based composites are commodities in the automotive industry, but show limitations when recycled. Thus, attention is being devoted to alternative reinforcements like natural fibers. Curauá (Curacao, Ananas erectifolius) is reported in the literature as a promising source of natural fiber prone to be used as composite reinforcement. Nonetheless, one important challenge is to obtain properly dispersed materials, especially when the percentages of reinforcements are higher than 30 wt %. In this work, composite materials with curauá fiber contents ranging from 20 wt % to 50 wt % showed a linear positive evolution of its tensile strength and Young’s modulus against reinforcement content. This is an indication of good reinforcement dispersion and of favorable stress transfer at the fiber-matrix interphase. A car door handle was used as a test case to assess the suitability of curauá-based composites to replace glass fiber-reinforced composites. The mechanical analysis and a preliminary lifecycle analysis are performed to prove such ability.