A biomimetic adhesive with high adhesion strength and toughness comprising soybean meal, chitosan, and condensed tannin-functionalized boron nitride nanosheets

Soybean meal (SM)-based adhesive can solve the issues of formaldehyde emission and over-reliance of aldehyde-based resins but suffers from poor water resistance, weak adhesion strength, and high brittleness. Herein, a high-performance adhesive inspired by lobster cuticular sclerotization was developed using catechol-rich condensed tannin-functionalized boron nitride nanosheets (CT@BNNSs), amino-containing chitosan (CS), and SM (CT@BNNSs/CS/SM). The oxidative crosslinking between the catechol and amino, initiated by oxygen at high temperatures, formed a strengthened and water-resistant interior network. These strong intermolecular interactions induced by phenol-amine synergy accompanied by the reinforcement of uniformly dispersed BNNSs improved the load transfer and energy dissipation capacity, endowing the adhesive with great cohesion strength. Given these synergistic effects, the biomimetic CT@BNNSs/CS/SM adhesive caused noticeable improvements in water tolerance, mechanical strength, and toughness over the neat SM adhesive, e.g., enhanced wet shear strength (1.46 vs. 0.66 MPa, respectively), boiling water shear strength (0.92 vs. 0.43 MPa, respectively), and debonding work (0.368 vs. 0.113 J, respectively). Thus, this study provided a green and low-cost bionic strategy for the preparation of high-performance biomass adhesives.

A Tough and Mildew-Proof Soybean-Based Adhesive Inspired by Mussel and Algae

Despite the recent advances in protein-based adhesives, achieving strong adhesion and mold resistance in wet environment is challenging. Herein, a facile fabrication technology of preparing tough bio-adhesive by incorporating soybean meal and blood meal is presented. Inspired by the marine mussel byssi and brown algae, metal coordination was introduced into a loosely bound protein system to construct multiple chemical cross-linking networks. Mixed alkali-modified blood meal (mBM) was mixed with soybean meal, then 1,6-hexane dioldiglycidyl ether (HDE) and zinc ion were introduced to fabricate soybean meal and blood meal-based adhesives. The attained adhesives exhibited good thermal stability, water resistance (the wet shear strength is 1.1 MPa), and mold resistance, with appropriate solid content (34.3%) and relatively low moisture uptake (11.9%). These outstanding performances would be attributed to the reaction of 1,6-hexane dioldiglycidyl ether with protein to form a preliminary cross-linking network; subsequently, the coordination of zinc ions with amino or carboxyl strengthened and toughened the adhesive. Finally, the calcium ions gelled the adhesives, providing cohesion force and making the network structure more compact. This study realized the value-added utilization of protein co-products and developed a new eco-friendly bio-based adhesive.

Improving Mildew Resistance of Soy Meal by Nano-Ag/TiO2, Zinc Pyrithione and 4-Cumylphenol

As a byproduct from the soybean oil industry, soy meal can be reproduced into value-added products to replace formaldehyde as a plywood adhesive. However, the use of soy meal has been limited by its poor antifungal and antiseptic properties. In this work, three kinds of material, namely nano-Ag/TiO₂, zinc pyrithione, and 4-cumylphenol were applied to enhance the mildew resistance of soy meal via breakdown of the cellular structure of mildew. The fungi and mold resistance, morphology, thermal properties, and mechanism of the modified soy meal were evaluated. The success of the antifungal and antiseptic properties was confirmed by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy. The results indicated that all three kinds of material improved the fungi and mold resistance of soy meal, and sample B, which was modified with a compound of nano-Ag/TiO₂ and zinc pyrithione, was the effective antifungal raw material for the soy-based adhesives. FTIR indicated that the great improvement of antifungal properties of soy meal modified with 4-cumylphenol might be caused by the reaction between COO– groups of soy protein. This research can help understand the effects of the chemical modification of nano-Ag/TiO₂, zinc pyrithione, and 4-cumylphenol on soy meal, and the modified soy meal exhibits potential for utilization in the plywood adhesive industry.

Synthesis of Amino-Functionalized Waste Wood Flour Adsorbent for High-Capacity Pb(II) Adsorption

An innovative wood flour-based adsorbent for Pb(II) removal was synthesized via a cost-effective and environment-friendly method, which could be high on the priority list owing to its high absorption capacity. By increasing the specific surface and introducing functional groups through delignification and amination, the experimental adsorption capacity of the prepared adsorbent could reach 189.9 mg/g in 180 min (pH = 4, T = 293 K, dosage = 1 g/L, and ion concentration = 300 mg/L). This value is higher than most of those achieved in previous studies on wood-based adsorbents. Pseudo-second-order and Langmuir models were utilized to describe the adsorption kinetics and isotherms, respectively. The effects of solution pH, adsorbent dosage, and temperature on the adsorption efficiency were also evaluated. With a low decrease rate of 20.2% in five cycles, the adsorbent possessed reusability. The adsorbents exhibited high selectivity in the Pb(II), Cu(II), and Zn(II) mixed solution, and the selectivity coefficient k of adsorbents to Pb(II) could reach approximately 2.74 in triad. The method could prompt the development of cost-effective methods for the removal of heavy metals from wastewater.