pH-sensitive hydrogel based on carboxymethyl chitosan/sodium alginate and its application for drug delivery: pH-sensitive hydrogel based on carboxymethyl chitosan/sodium alginate and its application for drug delivery

Prevention of Hypercholesterolemia with "Liposomes in Microspheres" Composite Carriers: A Promising Approach for Intestinal-Targeted Oral Delivery of Astaxanthin

Cardiovascular diseases are caused by hypercholesterolemia. Astaxanthin (AST) has been reported to exhibit antioxidant and anti-inflammatory properties. However, its bioavailability is poor because of low solubility and instability. In order to improve the bioavailability of AST, we developed an intestinal-responsive composite carrier termed as "liposomes in micropheres" incorporating N-succinyl-chitosan (NSC)-poly(ethylene glycol) (PEG) liposomes that functionalized by neonatal Fc receptors (FcRn) into hydrogels of sodium alginate (SA) and carboxymethyl chitosan (CMCS). In the AST NSC/HSA-PEG liposomes@SA/CMCS microspheres, the AST's encapsulation efficiency (EE) was 96.26% (w/w) and its loading capacity (LC) was 6.47% (w/w). AST NSC/HSA-PEG liposomes had stability in the gastric conditions and achieved long-term release of AST in intestinal conditions. Then, AST NSC/HSA-PEG liposomes@SA/CMCS bind to intestinal epithelial cell targets by the neonatal Fc receptor. In vitro permeation studies show that there was a 4-fold increase of AST NSC/HSA-PEG liposomes@SA/CMCS in AST permeation across the intestinal epithelium. Subsequent in vivo experiments demonstrated that the composite carrier exhibited a remarkable mucoadhesive capacity, allowing for extended intestinal retention of up to 12 h, and it displayed deep penetration through the mucus layer, efficiently entering the intestinal villi epithelial cells, and enhancing the absorption of AST and its bioavailability in vivo. And oral administration of AST NSC/HSA-PEG liposomes@SA/CMCS could effectively prevent hypercholesterolemia caused by a high-fat, high-cholesterol diet (HFHCD). These advancements highlight the potential of NSC/HSA-PEG liposomes@SA/CMCS composite carriers for targeted and oral uptake of hydrophobic bioactives.

pH-sensitive cellulose/chitin nanofibrillar hydrogel for dye pollutant removal

In this study, a pH-sensitive smart hydrogel was successfully prepared by combining a polyelectrolyte complex using biopolymeric nanofibrils. By adding a green citric acid cross-linking agent to the formed chitin and cellulose-derived nanofibrillar polyelectrolytic complex, a hydrogel with excellent structural stability could be prepared even in a water environment, and all processes were conducted in an aqueous system. The prepared biopolymeric nanofibrillar hydrogel not only enables rapid conversion of swelling degree and surface charge according to pH but can also effectively remove ionic contaminants. The ionic dye removal capacity was 372.0 mg/g for anionic AO and 140.5 mg/g for cationic MB. The surface charge conversion ability according to pH could be easily applied to the desorption of the removed contaminants, and as a result, it showed an excellent contaminant removal efficiency of 95.1 % or more even in the repeated reuse process 5 times. Overall, the eco-friendly biopolymeric nanofibrillar pH-sensitive hydrogel shows potential for complex wastewater treatment and long-term use.

A nanofluidic sensing platform based on robust and flexible graphene oxide/chitosan nanochannel membranes for glucose and urea detection

We present the development of a health-monitoring nanofluidic membrane utilizing biocompatible and biodegradable graphene oxide, chitosan, and graphene quantum dots. The nanoconfinement provided by graphene oxide nanolayers encapsulates chitosan molecules, allowing for their conformational changes and switchable hydrophobic-hydrophilic behavior in response to pH variations. This low-dimensional membrane operates as an array of nanofluidic channels that can release quantum dots upon pH change. The photoluminescence emission from quantum dots enables rapid and reliable optical visualization of pH changes, facilitating efficient human health monitoring. To ensure fouling prevention and enable multiple usages, we adopt a design approach that avoids direct contact between biomarkers and the nanochannels. This design strategy, coupled with good mechanical properties (Young's modulus of 5.5 ± 0.7 GPa), preserves the integrity and functionality of the sensors for repeated sensing cycles. Furthermore, leveraging the memory effect, our sensors can be reloaded with graphene quantum dots multiple times without significant loss of selectivity, achieving reusability. The wide-ranging capabilities of 2D materials and stimuli-responsive polymers empower our sustainable approach to designing low-dimensional, robust, and flexible sensing materials. This approach allows for the integration of various biorecognition elements and signal transduction modes, expanding the versatility and applications of the designed materials.

Synthesis and characterization of a novel hydrogel based on carboxymethyl chitosan/sodium alginate with the ability to release simvastatin for chronic wound healing

Since wound dressing has been considered a promising strategy to improve wound healing, recent attention has been focused on the development of modern wound dressings based on synthetic and bioactive polymers. In this study, we prepared a multifunctional wound dressing based on carboxymethyl chitosan (CMC)/sodium alginate (Alg) hydrogel containing a nanostructured lipid carrier (NLC) in which simvastatin (SIM) has been encapsulated. This dressing aimed to act as a barrier against pathogens, eliminate excess exudates, and accelerate wound healing. Among various fabricated composites of dressing, the hydrogel composite with a CMC/sodium Alg ratio of 1:2 had an average pore size of about 98.44 ± 26.9 μm and showed 707 ± 31.9% swelling and a 2116 ± 79.2 g m-2per day water vapor transfer rate (WVTR), demonstrating appropriate properties for absorbing exudates and maintaining wound moisture. The NLC with optimum composition and properties had a spherical shape and uniform particle size distribution (74.46 ± 7.9 nm). The prepared nanocomposite hydrogel displayed excellent antibacterial activity againstEscherichia coliandStaphylococcus aureusas well as high biocompatibility on L929 mouse fibroblast cells. It can release the loaded SIM drug slowly and over a prolonged period of time. The highest drug release occurred (80%) within 14 d. The results showed that this novel nanocomposite could be a promising candidate as a wound dressing for treating various chronic wounds in skin tissues.

Algal Polysaccharides-Based Hydrogels: Extraction, Synthesis, Characterization, and Applications

Hydrogels are three-dimensional crosslinked hydrophilic polymer networks with great potential in drug delivery, tissue engineering, wound dressing, agrochemicals application, food packaging, and cosmetics. However, conventional synthetic polymer hydrogels may be hazardous and have poor biocompatibility and biodegradability. Algal polysaccharides are abundant natural products with biocompatible and biodegradable properties. Polysaccharides and their derivatives also possess unique features such as physicochemical properties, hydrophilicity, mechanical strength, and tunable functionality. As such, algal polysaccharides have been widely exploited as building blocks in the fabrication of polysaccharide-based hydrogels through physical and/or chemical crosslinking. In this review, we discuss the extraction and characterization of polysaccharides derived from algae. This review focuses on recent advances in synthesis and applications of algal polysaccharides-based hydrogels. Additionally, we discuss the techno-economic analyses of chitosan and acrylic acid-based hydrogels, drawing attention to the importance of such analyses for hydrogels. Finally, the future prospects of algal polysaccharides-based hydrogels are outlined.

Multi-Responsive Optimization of Novel pH-Sensitive Hydrogel Beads Based on Basil Seed Mucilage, Alginate, and Magnetic Particles

Conventional drug delivery systems often cause side effects and gastric degradation. Novel drug delivery systems must be developed to decrease side effects and increase the efficacy of drug delivery. This research aimed to fabricate hydrogel beads for use as a drug delivery system based on basil seed mucilage (BSM), sodium alginate (SA), and magnetic particles (MPs). The Taguchi method and Grey relational analysis were used for the design and optimization of the hydrogel beads. Three factors, including BSM, SA, and MPs at four levels were designed by L-16 orthogonal arrays. BSM was the main factor influencing bead swelling, drug release rate at pH 7.4, and release of antioxidants at pH 1.2 and 7.4. In addition, SA and MPs mainly affected drug loading and drug release rate in acidic medium, respectively. Grey relational analysis indicated that the composition providing optimal overall properties was 0.2 vol% BSM, 0.8 vol% SA, and 2.25 vol% MPs. Based on the findings of this work, BSM/SA/MPs hydrogel beads have the potential to be used as a pH-sensitive alternative material for drug delivery in colon-specific systems.

pH-Responsive Eco-Friendly Chitosan–Chlorella Hydrogel Beads for Water Retention and Controlled Release of Humic Acid

For improving the mechanical strength of controlled release fertilizer (CRF) hydrogels, a novel material of Chlorella was employed as a bio-based filler to prepare chitosan–chlorella hydrogel beads with physical crosslink method. Here, the synthesis mechanism was investigated, and the chitosan–chlorella hydrogel beads exhibited enhanced mechanical stability under centrifugation and sonication than pure chitosan hydrogel beads. Chlorella brought more abundant functional groups to original chitosan hydrogel, hence, chitosan–chlorella hydrogel beads represented greater sensitivity and controllable response to external factors including pH, salt solution, temperature. In distilled water, the hydrogel beads with 40 wt% Chlorella reached the largest water absorption ratio of 42.92 g/g. Moreover, the mechanism and kinetics process of swelling behavior of the chitosan–chlorella hydrogel beads were evaluated, and the loading and releasing of humic acid by the hydrogel beads as a carrier material were pH-dependent and adjustable, which exhibit the potential of chitosan–chlorella hydrogel beads in the field of controlled release carrier biomaterials.

Controlled release of 5-fluorouracil to melanoma cells using a hydrogel/micelle composites based on deoxycholic acid and carboxymethyl chitosan

5-Fluorouracil (5-FU) is an antimetabolite drug widely used for the treatment of skin cancer. Despite its proven efficacy in treating malignancies, its systemic administration is limited due to severe side effects. To address this issue, topical delivery of 5-FU has been proposed as an alternative approach for the treatment of skin cancer, however, the poor permeability of 5-FU through the skin is still a challenge. Here, we introduced a pH-responsive micellar hydrogel system based on deoxycholic acid micelle (DCA Mic) and carboxymethyl chitosan hydrogel (CMC Hyd) to enhance 5-FU efficacy against skin cancer and reduce its systemic side effects by improving its delivery into the skin. The properties of the Mic/Hyd system were determined by Fourier-transform infrared spectroscopy (FT-IR), dynamic light scattering (DLS), zeta sizer, atomic force microscopy (AFM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Drug release studies showed pH-dependent properties of the Hyd. The final formulation was demonstrated to have enhanced anticancer activity than 5-FU against the growth of melanoma cells. The 5-FU@Mic-Hyd could be a promising delivery platform with enhanced efficacy in the management of skin cancer without systemic toxicity.

Recent progress in the preparation, chemical interactions and applications of biocompatible polysaccharide-protein nanogel carriers

Nanogel carriers are rapidly emerged as a major delivery strategy in the fields of food, biology and medicine for small particle size, excellent solubility, high loading, and controlled release. Natural polysaccharides and proteins are selected for the preparation of biocompatible, biodegradable, low toxic, and less immunogenic nanogels. Different polysaccharides and proteins form complex nanogels through different interaction forces (e.g., electrostatic interaction and hydrophobic interaction). The present review pursues three aims: 1) to introduce several well-known dietary polysaccharides (chitosan, dextran and alginate) and proteins (whey protein and lysozyme); 2) to discuss the types, preparation methods, chemical interactions and properties of various biocompatible complex carriers; 3) to present the application and prospect of polysaccharide-protein complex in bioactive ingredient delivery, nutrient encapsulation and flavor protection. We expect that the integration with nano-intelligent technology will improve the functional ingredient loading, recognition specificity and controlled release capabilities of polysaccharide-protein nanocomposites to generate new intelligent nanogels in the field of food industry in the future.

Improved hemostatic effects by Fe3+ modified biomimetic PLLA cotton-like mat via sodium alginate grafted with dopamine

The development of an excellent, bioabsorbable hemostatic material for deep wound remains a challenge. In this work, a biodegradable cotton-like biomimetic fibrous mat of poly (l-lactic acid) (PLLA) was made by melt spinning. Subsequently, SD composite was prepared by cross-linking sodium alginate (SA) with dopamine (DA). It was immobilized on the fibre surface, which inspired by mussel byssus. Finally, Fe3+ was loaded onto the 0.5SD/PLLA composite by chelation with the carboxyl of alginate and phenolic hydroxy of dopamine. The haemostasis experiment found that the hemostatic time 47 s in vitro. However, the bleeding volume was 0.097 g and hemostatic time was 23 s when 20Fe3+-0.5SD/PLLA was applied in the haemostasis of the rat liver. As a result of its robust hydrophilicity and bouffant cotton-like structure, it could absorb a large water from blood, which could concentrate the component of blood and reduce the clotting time. Furthermore, the addition of Fe3+ in the 0.5SD/PLLA had a significant effect on improve hemostatic property. It also displayed excellent antibacterial property for Escherichia coli and Staphylococcus aureus. Notably, it possesses superior hemocompatibility, cytocompatibility and histocompatibility. Hence, 20Fe3+-0.5SD/PLLA has high potential application in haemostasis for clinical settings due to its outstanding properties.

Incorporation of Bioglass Improved the Mechanical Stability and Bioactivity of Alginate/Carboxymethyl Chitosan Hydrogel Wound Dressing

Recently, hydrogel wound dressings were popular in wound healing because of their advantages over traditional gauze dressings. The alginate/carboxymethyl chitosan (SA/CMCS) hydrogel wound dressing has been widely studied because of its biocompatibility and antibacterial ability. However, the poor mechanical stability and lack of bioactivity limit their applications. Bioglass (BG) has been well acknowledged as a bioactive material, and SA/BG hydrogels have been reported to be able to promote wound healing. Calcium ions released from BG can further cross-link SA, which may enhance the mechanical stability of the SA/CMCS hydrogels. Therefore, in this study, BG was incorporated into SA/CMCS hydrogel in order to obtain a bioactive alginate/CMCS/BG (SA/CMCS/BG) hydrogel wound dressing with improved mechanical stability. Results showed that the Young's modulus of SA/CMCS/BG hydrogel was three times higher than that of SA/CMCS hydrogel. In addition to better antibacterial and coagulation properties, SA/CMCS/BG hydrogels possess stronger bioactivity than SA/CMCS hydrogels as they could accelerate skin wound closure by regulating the host inflammation responses, stimulating angiogenesis, and enhancing collagen deposition in wound sites, which suggests that SA/CMCS/BG hydrogels are good candidates for clinic wound dressings.

Dual drug delivery system based on pH-sensitive silk fibroin/alginate nanoparticles entrapped in PNIPAM hydrogel for treating severe infected burn wound

Herein, the pH-sensitive vancomycin (VANCO) loaded silk fibroin-sodium alginate nanoparticles (NPs) embedded in poly(N-isopropylacrylamide) (PNIPAM) hydrogel containing epidermal growth factor (EGF) are introduced for treating chronic burn wound infections. The hybrid system was developed to control the release rates of an antibiotic and growth factor for optimal treatment of burn infections. VANCO had a pH responsive release behavior from the nanoparticle (NP) and showed higher release rate in an alkaline pH compared to the neutral pH during 10 d. About 30% of EGF was also released from the hydrogel within 20 d. The released VANCO and EGF preserved their bioactivity more than ∼ 80%. The suitable physico-chemical properties and cellular behaviors of PNIPAM hydrogel supported the proliferation and growth of the fibroblast cells. Furthermore, the higher re-epithelialization with good wound contraction rate, neovascular formation, and expression of transforming growth factor-beta were observed in S. aureus infected rat burn wound by using the hydrogel containing VANCO and EGF compared with untreated wounds and hydrogel alone. The wound infection was also significantly reduced in the groups treated with the hydrogels containing VANCO. Overall, in vitro and in vivo results suggested that developed hybrid system would be a promising construct to treat severe wound infection.

Fabrication of sulfoxaflor-loaded natural polysaccharide floating hydrogel microspheres against Nilaparvata lugens (Stal) in rice fields

BACKGROUND

Nilaparvata lugens (Stal) nymphs and adults aggregate and feed on leaf sheaths at the base of rice plants. It is difficult to apply traditional spray treatments directly onto the plant stems due to the blocking agent produced by leaves. Further, spiders and mirids, the natural enemies of N. lugens (Stal), are directly exposed to the chemicals during spraying. Sulfoxaflor-loaded natural polysaccharide microspheres with good performance were developed and tested in rice fields. The absorption, distribution, and dissipation of sulfoxaflor in rice plants, soil, and water were examined.

RESULTS

Sulfoxaflor-loaded natural polysaccharide microspheres were prepared through physical embedding and ionic crosslinking, using citronellol as an oil phase to provide floatation. The sustained release of sulfoxaflor was achieved through swelling and dissolution, indicating that these structures could effectively control pesticide release. Field experiments showed that these microspheres were able to float in water and gather around the stem of rice plants and that their insecticidal effect was remarkably improved compared to that achieved using the suspension concentrate. Results also showed that the residual content of stems following treatment with sulfoxaflor-loaded natural polysaccharide microspheres reached 0.331 mg kg^-1 , but was reduced in other parts of the plant.

CONCLUSION

In the present study, sulfoxaflor-loaded natural polysaccharide microspheres with optimized properties were successfully prepared. These microspheres produced a better control effect on N. lugens (Stal) compared to the use of the sulfoxaflor suspension concentrate. Their application may help promote the scientific control of target pests in rice fields. © 2020 Society of Chemical Industry.

Advances in the Design of pH-Sensitive Cubosome Liquid Crystalline Nanocarriers for Drug Delivery Applications

Nanostructure bicontinuous cubic phase self-assembled materials are receiving expanding applications as biocompatible delivery systems in various therapeutic fields. The functionalization of cubosome, spongosome, hexosome and liposome nanocarriers by pH-sensitive lipids and/or pH-sensitive polymer shells offers new opportunities for oral and topical drug delivery towards a new generation of cancer therapies. The electrochemical behavior of drug compounds may favor pH-triggered drug release as well. Here, we highlight recent investigations, which explore the phase behavior of mixed nonlamellar lipid/fatty acid or phospholipid systems for the design of pH-responsive and mucoadhesive drug delivery systems with sustained-release properties. X-ray diffraction and small-angle X-ray scattering (SAXS) techniques are widely used in the development of innovative delivery assemblies through detailed structural analyses of multiple amphiphilic compositions from the lipid/co-lipid/water phase diagrams. pH-responsive nanoscale materials and nanoparticles are required for challenging therapeutic applications such as oral delivery of therapeutic proteins and peptides as well as of poorly water-soluble substances. Perspective nanomedicine developments with smart cubosome nanocarriers may exploit compositions elaborated to overcome the intestinal obstacles, dual-drug loaded pH-sensitive liquid crystalline architectures aiming at enhanced therapeutic efficacy, as well as composite (lipid/polyelectrolyte) types of mucoadhesive controlled release colloidal cubosomal formulations for the improvement of the drugs' bioavailability.

O-Carboxymethyl chitosan-based pH-responsive amphiphilic chitosan derivatives: Characterization, aggregation behavior, and application

Chitosan has attracted much attention in drug delivery, however, carboxymethyl chitosan (CMC)-based self-aggregated nanocarriers are seldom reported. In this paper, two kinds of CMC-based pH-responsive amphiphilic chitosan derivatives, N-2-hydroxylpropyl-3-butyl ether-O-carboxymethyl chitosan (HBCC) and N-2-hydroxylpropyl-3-(2-ethylhexyl glycidyl ether)-O-carboxymethyl chitosan (H2ECC), have been synthesized by the homogeneous reaction. The molecular structures were characterized by FTIR, ¹H NMR and ¹³C NMR. The optimum reaction condition was obtained based on the data of ¹H NMR spectrum: reaction time of 4 h, reaction temperature of 80 °C and n_epoxyn_-NH2 of 3/1, respectively. The XRD patterns showed the crystallinity of HBCC and H2ECC decreased due to the introduction of hydrophobic segments. The thermostability of HBCC and H2ECC was improved for the formation of heat-resistant stereo-complexed structures. The intermolecular hydrophobic interaction hindered the intermolecular mobility by increasing glass transition temperature of ca. 10 °C. Both HBCC and H2ECC have very low critical aggregation concentrations (HBCC: 0.66-1.56 g/L, H2ECC: 0.57-1.07 g/L) and moderate aggregate particle size, which is advantageous for utilization as a drug carrier. The curcumin loaded HBCC and H2ECC aggregates showed nontoxicity, meanwhile, HBCC and H2ECC showed good antibacterial activity against Staphylococcus aureus and Escherichia coli. As a result of these two favorable properties, HBCC and H2ECC could be used as curcumin nanocarriers as well as antibacterial agents.

An injectable carboxymethyl chitosan-methylcellulose-pluronic hydrogel for the encapsulation of meloxicam loaded nanoparticles

Hydrogel scaffolds have been frequently utilized due to their ability to absorb water and develop similar body cell conditions. Specific drug delivery to the tissues ensures less adverse side effects and more efficiency. In the present study, carboxymethyl chitosan (CMC)-methylcellulose (MC)-pluronic (P) and zinc chloride hydrogels containing meloxicam loaded into nanoparticles were developed and characterized. Nanoparticles were incorporated at 3.5, 4.5 and 5.5% (w/v). Hydrogels containing the same amounts of the meloxicam solution were also prepared. Gelation time, swelling and degradation of the hydrogels were investigated. Hydrogels were characterized by scanning electron microscopy (SEM), attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy, and rheological analysis. Meloxicam release, chondrocytes attachment and growth on the hydrogels were also studied. Gelation time, swelling and the degradation rate of the hydrogels were found to be decreased by nanoparticles and increased with the addition of the meloxicam solution. SEM images also showed three-dimensional networks. The ATR-FTIR bands were shifted to the lower wave numbers in the hydrogels containing nanoparticles and shifted to the upper ones in the hydrogels containing meloxicam solution. Storage (G') and loss (G″) modulus were increased by the nanoparticles and reduced by the meloxicam solution. 100% of meloxicam was released from the hydrogels containing the meloxicam solution within 20 days, but it was released slowly from the hydrogels containing nanoparticles in 37days. Chondrocytes metabolic activity was increased on the 6th and 10th days for all hydrogels. Hydrogel containing nanoparticles showed good biocompatibility, bioadhesion, cell growth and expansion. The hydrogel could be, therefore, suitable as a new composite biomaterial for the regeneration of articular cartilage and meloxicam delivery to control the pain and inflammation in osteoarthritis.

Reversible Mechanical Regulation and Splicing Ability of Alginate-Based Gel Based on Photo-Responsiveness of Molecular-Level Conformation

In this study, benefiting from the sensitive molecular conformation transversion in azobenzene, a new strategy for fabricating alginate gels with the abilities of splicing and photo-responsive mechanical adjustment is reported. Firstly, a 4,4’-azobis(benzoylhydrazide) (Azo-hydrazide) linker was used to crosslink alginate physically via the electrostatic interaction between hydrazide groups and carboxyl groups. It was then shaped and transferred in situ to a chemically crosslinked gel via 450 nm light irradiation. Under the irradiation, the molecular conformation change of azobenzene in the linker was able to form covalent bonds at the crosslinking points of the gels. Furthermore, the reversible conformation transformation of azobenzene was able to induce the increase and decrease of the storage modulus under irradiation with 365 nm light and 450 nm light, respectively, while also providing gel-like mechanical properties, depending upon the irradiation time and given wavelength. Meanwhile, the results also indicated that active groups could contribute to the splicing ability of the gel and construct a hollow cavity structure. It is believed that this work could provide a versatile strategy for preparing photo-responsive gels with reversibly tunable mechanical properties.