Enhanced therapeutic efficacy of clotrimazole by delivery through poly(ethylene oxide)‐block‐poly(ε‐caprolactone) copolymer‐based micelles

PEO-b-PCL/Tween 80/cyclodextrin systems: from bioinspired fabrication to possible nasal administration of ropinirole hydrochloride

In this study, we designed and developed systems composed of poly(ethylene-oxide)-b-poly(ε-caprolactone) block copolymers of different molecular weights and compositions, non-ionic surfactant, and cyclodextrins. The innovation of this study lies in the combination of these diverse biomaterials to create biomimetic and bioinspired drug delivery supramolecular structures. The systems were formed by the thin-film hydration method. Extensive physicochemical and morphological characterization was conducted using differential scanning calorimetry, light scattering techniques, microcalorimetry analysis, high-resolution ultrasound spectroscopy, surface tension measurements, fluorescence spectroscopy, cryogenic transmission electron microscopy images, and in vitro cytotoxicity evaluation. These innovative hybrid nanoparticles were found to be attractive candidates as drug delivery systems with unique properties by encompassing the physicochemical and thermotropic properties of both classes of materials. Subsequently, Ropinirole hydrochloride was used as a model drug for the purpose of this study. These systems showed a high RH content (%), and in vitro diffusion experiments revealed that more than 90% of the loading dose was released under pH and temperature conditions that simulate the conditions of the nasal cavity. Promising drug release performance was observed with all tested formulations, worth further investigation to explore both ex vivo permeation through the nasal mucosa and in vivo performance in an experimental animal model.

Selective Anticervical Cancer Injectable and Self-Healable Hydrogel Platforms Constructed of Drug-Loaded Cross-Linkable Unimolecular Micelles in a Single and Combination Therapy

In the face of severe side effects of systemic chemotherapy used in cervical cancer, topical selective drug carriers with long-lasting effects are being sought. Hydrogels are suitable platforms, but their use is problematic in the case of delivery of hydrophobic drugs with anticancer activity. Herein, hydrogels constructed of unimolecular micelles displaying enhanced solubilization of aromatic lipophilic bioactive compounds are presented. Star-shaped poly(benzyl glycidyl ether)-block-poly(glycidyl glycerol ether) with an aryl-enriched core show high encapsulation capacity of poor water-soluble nifuratel and clotrimazole. Nifuratel attained selectivity against cervical cancer cells, whereas clotrimazole preserved its original selectivity. The combination of unimolecular micelles loaded with both drugs provided synergism; however, they were still selective against cervical cancer cells. The cross-linking of drug-loaded unimolecular micelles via dynamic boronic esters provided injectable and self-healable hydrogel drug carriers also displaying synergistic anticancer activity, suitable for intravaginal administration and assuring the effective coverage of the afflicted tissue area and efficient tissue permeability with hydrophobic bioactive compounds. Here, we show that the combination of star-shaped polyether amphiphiles and boronic ester cross-linking chemistry provides a new strategy for obtaining hydrogel platforms suitable for efficient hydrophobic drug delivery.

Evaluation of Encapsulation Potential of Selected Star-Hyperbranched Polyglycidol Architectures: Predictive Molecular Dynamics Simulations and Experimental Validation

Polymers, including non-linear copolymers, have great potential in the development of drug delivery systems with many advantages, but the design requires optimizing polymer-drug interactions. Molecular dynamics (MD) simulations can provide insights into polymer-drug interactions for designing delivery systems, but mimicking formulation processes such as drying is often not included in in silico studies. This study demonstrates an MD approach to model drying of systems comprising either hydrophilic tinidazole or hydrophobic clotrimazole drugs with amphiphilic hyperbranched copolyethers. The simulated drying protocol was critical for elucidating drug encapsulation and binding mechanisms. Experimentally, two polymers were synthesized and shown to encapsulate clotrimazole with up to 83% efficiency, guided by interactions with the hydrophobic core observed in simulations. In contrast, tinidazole is associated with surface regions, indicating capacity differences between drug types. Overall, this work highlights MD simulation of the drying process as an important tool for predicting drug-polymer complex behaviour. The modelled formulation protocol enabled high encapsulation efficiency and opened possibilities for the design of delivery systems based on computationally derived binding mechanisms. This demonstrates a computational-experimental approach where simulated drying was integral to elucidating interactions and developing optimized complexes, emphasizing the value of molecular modelling for the development of drug delivery formulations.

Direct Quantification of Serum Protein Interactions with PEGylated Micelle Nanocarriers

A large repertoire of nanocarrier (NC) technologies exists, each with highly specified advantages in terms of targetability, stability, and immunological inertness. The characterization of such NC properties within physiological conditions is essential for the development of optimized drug delivery systems. One method that is well established for reducing premature elimination by avoiding protein adsorption on NCs is surface functionalization with poly(ethylene glycol) (PEG), aptly called PEGylation. However, recent studies revealed that some PEGylated NCs have a delayed immune response, indicating the occurrence of protein-NC interactions. Obvious protein-NC interactions, especially in micellar systems, may have been overlooked as many early studies relied on techniques less sensitive to molecular level interactions. More sensitive techniques have been developed, but a major challenge is the direct measurement of interactions, which must be done in situ, as micelle assemblies are dynamic. Here, we report the use of pulsed-interleaved excitation fluorescence cross-correlation spectroscopy (PIE-FCCS) to interrogate the interactions between two PEG-based micelle models and serum albumin protein to compare protein adsorption differences based on linear or cyclic PEG architectures. First, by measuring micelle diffusion in isolated and mixed solutions, we confirmed the thermal stability of diblock and triblock copolymer micelle assemblies. Further, we measured the co-diffusion of micelles and serum proteins, the magnitudes of which increased with concentration and continued incubation. The results demonstrate that PIE-FCCS is capable of measuring direct interactions between fluorescently labeled NC and serum proteins, even at concentrations 500 times lower than those observed physiologically. This capability showcases the potential utility of PIE-FCCS in the characterization of drug delivery systems in biomimetic conditions.

Cross-linkable star-hyperbranched unimolecular micelles for the enhancement of the anticancer activity of clotrimazole

Clotrimazole, a hydrophobic drug routinely used in the treatment of vaginal candidiasis, also shows antitumor activity. However, its use in chemotherapy has been unsuccessful to date due to its low solubility in aqueous media. In this work, new unimolecular micelles based on polyether star-hyperbranched carriers of clotrimazole are presented that can enhance solubility, and consequently the bioavailability, of clotrimazole in water. The amphiphilic constructs consisting of a hydrophobic poly(n-alkyl epoxide) core and hydrophilic corona of hyperbranched polyglycidol were synthesized in a three-step anionic ring-opening polymerization of epoxy monomers. The synthesis of such copolymers, however, was only possible by incorporating a linker to facilitate the elongation of the hydrophobic core with glycidol. Unimolecular micelles-clotrimazole formulations displayed significantly increased activity against human cervical cancer HeLa cells compared to the free drug, along with a weak effect on the viability of the normal dermal microvascular endothelium cells HMEC1. This selective activity of clotrimazole on cancer cells with little effect on normal cells was a result of the fact that clotrimazole targets the Warburg effect in cancer cells. Flow cytometric analysis revealed that the encapsulated clotrimazole significantly blocks the progression of the HeLa cycle in the G0/G1 phase and induces apoptosis. In addition, the ability of the synthesized amphiphilic constructs to form a dynamic hydrogel was demonstrated. Such a gel facilitates the delivery of drug-loaded single-molecule micelles to the affected area, where they can form a continuous, self-healing layer.

Control of drug release from cotton fabric by nanofibrous mat

A drug delivery system (DDSs) was developed in the present study based on textile substrates as drug carriers and electrospun nanofibers as a controller of release rate. Three types of drugs consisting of ciprofloxacin (CIP), clotrimazole (CLO), and benzalkonium chloride (BEN) were loaded into the cover glass (CG) and cotton fabrics (CF1 and CF2) separately. Then, the drug-loaded substrates were coated with polycaprolactone (PCL) and polycaprolactone/gelatin (PCL/Gel) nanofibers with various thicknesses. The morphology and hydrophilicity of the electrospun nanofibers and the release profile of drug-loaded samples were investigated. FTIR, XRD, and in vitro biodegradability analysis were analyzed to characterize the drug delivery system. A morphological study of electrospun fibers showed the mean diameter of the PCL and PCL/Gel nanofibers 127 ± 25 and 178 ± 38 nm, respectively. The drug delivery assay revealed that various factors affect the rate of drug releases, such as the type of drug, the type of drug carrier, and the thickness of the covered nanofibers. The study highlights the ability of drugs to load substrates with coated nanofibers as controlled drug delivery systems. In conclusion, it is shown that the obtained samples are excellent candidates for future wound dressing applications.

Microemulsified Gel Formulations for Topical Delivery of Clotrimazole: Structural and In Vitro Evaluation

Microemulsified gels (μEGs) with fascinating functions have become indispensable as topical drug delivery systems due to their structural flexibility, high stability, and facile manufacturing process. Topical administration is an attractive alternative to traditional methods because of advantages such as noninvasive administration, bypassing first-pass metabolism, and improving patient compliance. In this article, we report on the new formulations of microemulsion-based gels suitable for topical pharmaceutical applications using biocompatible and ecological ingredients. For this, two biocompatible μE formulations comprising clove oil/Brij-35/water/ethanol (formulation A) and clove oil/Brij-35/water/1-propanol (formulation B) were developed to encapsulate and improve the load of an antimycotic drug, Clotrimazole (CTZ), and further gelatinized to control the release of CTZ through skin barriers. By delimiting the pseudo-ternary phase diagram, optimum μE formulations with clove oil (∼15%) and Brij-35 (∼30%) were developed, keeping constant surfactant/co-surfactant ratio (1:1), to upheld 2.0 wt % CTZ. The as-developed formulations were further converted into smart gels by adding 2.0 wt % carboxymethyl cellulose (CMC) as a cross-linker to adhere to the controlled release of CTZ through complex skin barriers. Electron micrographs show a fine, monodispersed collection of CTZ-μE nanodroplets (∼60 nm), which did not coalesce even after gelation, forming spherical CTZ-μEG (∼90 nm). However, the maturity of CTZ nanodroplets observed by dynamic light scattering suggests the affinity of CTZ for the nonpolar microenvironment, which was further supported by the peak-to-peak correlation of Fourier transform infrared (FTIR) analysis and fluorescence measurement. In addition, HPLC analysis showed that the in vitro permeation release of CTZ-μEG from rabbit skin in the ethanolic phosphate buffer (pH = 7.4) was significantly increased by >98% within 6.0 h. This indicates the sustained release of CTZ in μEBG and the improvement in transdermal therapeutic efficacy of CTZ over its traditional topical formulations.

On the Rational Drug Design for Hypertension through NMR Spectroscopy

Antagonists of the AT1receptor (AT1R) are beneficial molecules that can prevent the peptide hormone angiotensin II from binding and activating the specific receptor causing hypertension in pathological states. This review article summarizes the multifaced applications of solid and liquid state high resolution nuclear magnetic resonance (NMR) spectroscopy in antihypertensive commercial drugs that act as AT1R antagonists. The 3D architecture of these compounds is explored through 2D NOESY spectroscopy and their interactions with micelles and lipid bilayers are described using solid state 13CP/MAS, 31P and 2H static solid state NMR spectroscopy. Due to their hydrophobic character, AT1R antagonists do not exert their optimum profile on the AT1R. Therefore, various vehicles are explored so as to effectively deliver these molecules to the site of action and to enhance their pharmaceutical efficacy. Cyclodextrins and polymers comprise successful examples of effective drug delivery vehicles, widely used for the delivery of hydrophobic drugs to the active site of the receptor. High resolution NMR spectroscopy provides valuable information on the physical-chemical forces that govern these drug:vehicle interactions, knowledge required to get a deeper understanding on the stability of the formed complexes and therefore the appropriateness and usefulness of the drug delivery system. In addition, it provides valuable information on the rational design towards the synthesis of more stable and efficient drug formulations.

Enhancement in the antibacterial activity of cephalexin by its delivery through star-shaped poly(ε-caprolactone)-block-poly(ethylene oxide) coated silver nanoparticles

The antibacterial activity of silver nanoparticles (AgNPs) stabilized with a four-armed star-shaped poly(ε-caprolactone)-block-poly(ethylene oxide) copolymer [St-P(CL-b-EO)] and its application as a drug delivery vehicle for cephalexin (Cp) was evaluated against pathogenic Staphylococcus aureus. The prepared AgNPs were characterized by ultraviolet-visible spectroscopy, Fourier transform infrared spectroscopy, zeta sizer and atomic force microscopy (AFM). The antibacterial efficiency of Cp is enhanced several-fold by its delivery through complexation with St-P(CL-b-EO)-AgNPs, monitored by microplate assay and biofilm destruction studies. Finally, the visual destruction of bacterial cells and its biofilms by employing Cp and its conjugates at their minimum inhibitory concentration (MIC50) and minimum biofilm inhibitory concentration (MBIC50), respectively, is observed by topographic imaging by AFM. Enhanced antibacterial activity of St-P(CL-b-EO)-AgNPs loaded Cp is attributed to penetrative nature of the drug cargo St-P(CL-b-EO)-AgNPs towards the bacterial cell wall.

Biocompatible PEO-b-PCL Nanosized Micelles as Drug Carriers: Structure and Drug-Polymer Interactions

We report on the preparation of drug nanocarriers by encapsulating losartan potassium (LSR) into amphiphilic block copolymer micelles, utilizing the biocompatible/biodegradable poly(ethylene oxide)-b-poly(ε-caprolactone) (PEO-b-PCL) diblock copolymer. The PEO-b-PCL micelles and LSR-loaded PEO-b-PCL nanocarriers were prepared by organic solvent evaporation method (OSEM). Light scattering and nuclear magnetic resonance (NMR) provide information on micelle structure and polymer-drug interactions. According to dynamic light scattering (DLS) analysis, the PEO-b-PCL micelles and LSR-loaded PEO-b-PCL nanocarriers formed nanostructures in the range of 17-26 nm in aqueous milieu. Attenuated total reflection Fourier transform infrared (ATR-FTIR) and ultraviolet-visible (UV-Vis) measurements confirmed the presence of LSR in the polymeric drug solutions. NMR results proved the successful encapsulation of LSR into the PEO-b-PCL micelles by analyzing the drug-micelles intermolecular interactions. Specifically, 2D-NOESY experiments clearly evidenced the intermolecular interactions between the biphenyl ring and butyl chain of LSR structure with the methylene signals of PCL. Additionally, NMR studies as a function of temperature demonstrated an unexpected, enhanced proton mobility of the PEO-b-PCL micellar core in D₂O solutions, probably caused by the melting of the PCL hydrophobic core.