A Gold Rush: Designing Hydrogels for Selective Recovery in Wastewater Containing Mixed Metal Ions

The use of synthetic hydrogels in wastewater treatment represents a promising and scalable approach to achieving clean water. By modulation of their chemical structure, hydrogels can effectively remove a wide range of toxic compounds, including emerging organic pollutants and heavy metals. For the latter, recovery is essential for both environmental protection and metal recycling. The increasing demand for gold, a nonrenewable metal widely used in many technologies, calls for methods for its selective recovery from complex metal cation solutions. This study explores easy-to-make poly(acrylamide-co-acrylic acid) hydrogels as adsorbents for gold recovery from industrial wastewater containing other precious metals. Such material can reduce gold cations into elemental nanoparticles and microparticles in acid environments at room temperature. This process offers a potential route for metal recovery that is not based on weak interaction or complex formation. Batch tests demonstrate a good adsorption capacity (up to 124 mg/g) and efficient separation from other precious metal ions (Ru, Ir, Pd, Pt, and Rh) in a solution that closely mimics realistic industrial waste conditions. These hydrogels would enable gold recovery also from other complex metal solutions, including those derived from the dissolution of electronic wastes.

High porosity, excellent mechanical strength, interpenetrating network-reinforced double network regenerated cellulose separators for lithium-ion battery

Cellulose material is emerging as a promising alternative to polyolefin separators in lithium-ion batteries (LIBs) due to its wide availability, electrolyte wettability and thermal stability. Based on the non-solvent induced phase separation, dissolving and regenerating the cellulose material by environmentally friendly solvents and non-solvent enables the efficient and pollution-free preparation of porous regenerated cellulose separator (RCS), greatly expanding their application potential in LIBs. However, the mechanical strength of pure RCS still hardly satisfactory, due to the weak intermolecular bonding and loose porous structure. Therefore, this study introduced an acrylic acid/acrylamide (AA/AM) polymer cross-linking system forming an interpenetrating network with the cellulose framework to produce a double network regenerated cellulose separator (DN-RCS) with high mechanical strength and high porosity. At meantime, the special functional group on AA/AM can influence the transport process of Li+ and PF6- in the electrolyte, helping to form a stable interface on the electrolyte/lithium anode surface to reduce the formation of lithium dendrites. The results showed that DN-RCS possessed excellent mechanical strength and porosity compared to RCS. The high ionic conductivity of DN-RCS (1.03 mS cm-1) enabled the assembled cell with excellent cycling stability (90.8 % at 0.5C for 100 cycles) and rate performance (65.2 % at 5C). This work provides a further feasible strategy for the preparation of a high-performance cellulose-based separator.

Efficient adsorption of cationic dyes by a novel honeycomb-like porous hydrogel with ultrahigh mechanical property

The optimization of hydrogel structure is crucial for adsorption capacity, mechanical stability, and reusability. Herein, a chitosan and laponite-XLS co-doped poly(acrylic acid-co-acrylamide) hydrogel (CXAA) with honeycomb-like porous structures is synthesized by cooperative cross-linking of 2-hydroxypropyltrimethyl ammonium chloride chitosan (HACC) and laponite-XLS in reticular frameworks of acrylic acid (AAc) and acrylamide (AM). The CXAA exhibits extraordinary mechanical performances including tough tensile strength (3.36 MPa) and elasticity (2756 %), which facilitates recycling in practical adsorption treatment and broadens potential applications. Since the regular porous structures can fully expose numerous adsorption sites and electronegative natures within polymer materials, CXAA displays efficient and selective adsorption properties for cationic dyes like methylene blue (MB) and malachite green (MG) from mixed pollutants and can reach record-high values (MB = 6886 mg g-1, MG = 11,381 mg g-1) compared with previously reported adsorbents. Therefore, CXAA exhibits promising potential for separating cationic and anionic dyes by their charge disparities. Mechanism studies show that the synergistic effects of HACC, laponite-XLS, and functional groups in monomers promote highly efficient adsorption. Besides, the adsorption capacity of CXAA remains stable even after undergoing five cycles of regeneration. The results confirm that CXAA is a promising adsorbent for effectively removing organic dyes in wastewater.

Synthesis of carboxymethyl starch co (polyacrylamide/ polyacrylic acid) hydrogel for removing methylene blue dye from aqueous solution

Natural polysaccharides, notably starch, have garnered attention for their accessibility, cost-effectiveness, and biodegradability. Modifying starch to carboxymethyl starch enhances its solubility, swelling capacity, and adsorption efficiency. This research examines the synthesis of an effective hydrogel adsorbent based on carboxymethyl starch for the elimination of methylene blue from aqueous solutions. The hydrogel was synthesized using polyacrylamide and polyacrylic acid as monomers, ammonium persulfate as the initiator, and N,N'-methylenebisacrylamide as the cross-linker. Through FESEM, swelling morphology was evaluated in both distilled water and methylene blue dye. The adsorption data elucidated that the adsorption capacity of the hydrogel significantly depends on the dosage of the adsorbent, pH, and concentration of the MB dye. At a pH of 7 and a dye concentration of 250 mg/L, the hydrogel exhibited an impressive 95 % removal rate for methylene blue. The results indicate that the adsorption process follows pseudo-second-order kinetics and conforms well to the Langmuir adsorption isotherm, indicating a maximum adsorption capacity of 1700 mg/g. According to the pseudo-second-order kinetic model and FTIR analysis, methylene blue chemisorbs to the adsorbent material. Hydrogel absorbents regulate adsorption through both intra-particle diffusion and liquid film diffusion. These results highlight the potential of the new hydrogel absorber for water purification.

Preparation of chitosan-based ternary nanocomposite hydrogel film by loading graphene oxide nanosheets as adsorbent for enhanced methylene blue dye removal

Our objective in this study is to fabricate a novel chitosan-based ternary nanocomposite hydrogel film by incorporating graphene oxide (GO) nanosheets into a chitosan/partially hydrolyzed polyacrylamide (PHPA) network to boost adsorption efficiency through one step self-assembly process in water. Basically, H-bonding interactions drive the formation of a crosslinking network structure. The Batch adsorption experiments evaluated the hydrogel nanocomposite's MB adsorption performance. By loading GO, surface roughness, swelling percentage (from 21,200 % to 35,800 %), elastic modulus of up to 73.7 Pa, and adsorption characteristics (from 282 mg/g to 468 mg/g) were enhanced. The nanocomposite displayed outstanding thermally/pH responsiveness properties. MB adsorption equilibrium was reached after 45 min and the adsorption capacity was 476.19 mg.g-1 when the initial concentration was 100 mg/L. The MB adsorption kinetics and isotherms by the nanocomposite were well correlated by the PSO and the Langmuir models (R2 > 0.99), respectively. The loaded nanocomposite was shown to be regenerative for five cycles through desorption studies. Thermodynamic analysis indicated that MB adsorption occurred spontaneously (ΔG°: -16.47 kJ/mol, 303 K) and exothermically (ΔH°: -79.49 kJ/mol). A plausible adsorption mechanism was proposed for the nanocomposite developed for MB removal. Our results can contribute to the design and fabrication of nanocomposite adsorbents to treat wastewater.

The Effect of Silver Nanoparticles/Titanium Dioxide in Poly(acrylic acid-co-acrylamide)-Modified, Deproteinized, Natural Rubber Composites on Dye Removal

This work aims to enhance the dye-removal performance of prepared poly(acrylic acid-co-acrylamide)-modified, deproteinized, natural rubber ((PAA-co-PAM)-DPNR) through incorporation with silver nanoparticles/titanium dioxide. The (PAA-co-PAM)-DPNR was prepared by emulsion-graft copolymerization with a grafting efficiency of 10.20 ± 2.33 to 54.26 ± 1.55%. The composites based on (PAA-co-PAM)-DPNR comprising silver nanoparticles and titanium dioxide ((PAA-co-PAM)-DPNR/Ag-TiO2) were then prepared by latex compounding using the fixed concentration of AgNO3 (0.5 phr) and varying concentrations of TiO2 at 1.0, 2.5, and 5.0 phr. The formation of silver nanoparticles was obtained by heat and applied pressure. The composites had a porous morphology as they allowed water to diffuse in their structure, allowing the high specific area to interact with dye molecules. The incorporation of silver nanoparticles/titanium dioxide improved the compressive modulus from 1.015 ± 0.062 to 2.283 ± 0.043 KPa. The (PAA-co-PAM)-DPNR/Ag-TiO2 composite with 5.0 phr of TiO2 had a maximum adsorption capacity of 206.42 mg/g, which increased by 2.02-fold compared to (PAA-co-PAM)-DPNR. The behavior of dye removal was assessed with the pseudo-second-order kinetic model and Langmuir isotherm adsorption model. These composites can maintain their removal efficiency above 90% for up to five cycles. Thus, these composites could have the potential for dye-removal applications.

Facile fabrication of Artemisia sphaerocephala krasch gum hydrogels by radiation induced cross-linking polymerization and enhanced ultrahigh adsorption for methylene blue

Although Artemisia sphaerocephala krasch gum (ASKG) has attracted growing attention in the field of medical engineering and food industries, however, there are few studies on the gelation of ASKG. In this paper, acrylic acid modified ASKG hydrogels were prepared by radiation induced grafting, cross-linking and polymerization technique for the first time. The semi-IPN structure was prepared by the cross-linked ASKG network and poly-AAc dispersed within the network. The effects of the adsorbed dose on the swelling ratio and gel fraction were investigated. The different acrylic acid content modified ASKG hydrogels (ASKGAAc1 and ASKGAAc2) for methyl blue (MB) adsorption were investigated, and the ASKG hydrogels was also studied for comparison. The influence of pH, contact time, initial concentration, temperature, ion strength on MB adsorption were tested. The results showed that acrylic acid can promote the formation of hydrogel and greatly enhanced the adsorption of ASKG. The adsorption isotherms were well obeyed the Langmuir model, and the maximum adsorption capacity for MB of ASKG, ASKGAAc1 and ASKGAAc2 were 571.43, 1517.8 and 1654.9 mg/g, respectively. Moreover, the MB adsorption by ASKG based hydrogels was exothermic, spontaneous, and more favorable at lower temperature. Furthermore, the adsorption-desorption experiments demonstrated a good reusability of these hydrogels.

A 3D phytic acid cross-linked high-porous conductive hydrogel integrating g-C3N4 for electrochemical multiplex sensing of heavy metal ions

It is a great challenge to develop an effective super-sensitive capture method for multiplex heavy metal ions (HMIs), because HMIs is extremely toxic to public health and the environment, what's more their contamination is usually multiplex ions pollution. In this work, a 3D high-porous conductive polymer hydrogel was designed and prepared with high-stable and easy mass production, which is very favorable for the industrialization. The polymer hydrogel (g-C₃N₄-P(Ani-Py)-PAAM) was formed from the mixture of aniline pyrrole copolymer and acrylamide cross-linked with phytic acid as dopant and cross-linker and integrated with g-C₃N₄. The 3D networked high-porous hydrogel not only exhibits excellent electrical conductivity, but also provides a large surface area for increasing the number of immobilized ions. Importantly, the 3D high-porous conductive polymer hydrogel was applied successfully in electrochemical multiplex sensing of HIMs. The prepared sensor used differential pulse anodic stripping voltammetry exhibited high sensitivities, low detection limit and wide detection ranges for Cd²⁺, Pb²⁺, Hg²⁺ and Cu²⁺, respectively. Moreover, the sensor showed a high accuracy in lake water test. The preparation and application of the hydrogel in electrochemical sensor provided an availability strategy to capture and detect the various HMIs by electrochemistry in solution and has great commercial application prospect.

Preparation and Characterization of Novel Microgels Containing Nano-SiO2 and Copolymeric Hydrogel Based on Poly (Acrylamide) and Poly (Acrylic Acid): Morphological, Structural and Swelling Studies

In this paper, novel microgels containing nano-SiO₂ were prepared by in situ copolymerization using nano-SiO₂ particles as a reinforcing agent, nanosilica functional monomer (silane-modified nano-SiO₂) as a structure and morphology director, acrylamide (AAm) as a monomer, acrylic acid (AAc) as a comonomer, potassium persulfate (KPS) as a polymerization initiator, and N,N'-methylene bis (acrylamide) (MBA) as a crosslinker. In addition, a conventional copolymeric hydrogel based on poly (acrylamide/acrylic acid) was synthesized by solution polymerization. The microgel samples, hydrogel and nanoparticles were characterized by transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). A FESEM micrograph of copolymeric hydrogel showed the high porosity and 3D interconnected microstructure. Furthermore, FESEM results demonstrated that when nano-SiO₂ particles were used in the AAm/AAc copolymerization process, the microstructure and morphology of product changed from porous hydrogel to a nanocomposite microgel with cauliflower-like morphology. According to FESEM images, the copolymerization of AAm and AAc monomers with a nanosilica functional monomer or polymerizable nanosilica particle as a seed led to a microgel with core-shell structure and morphology. These results demonstrated that the polymerizable vinyl group on nano-SiO₂ particles have controlled the copolymerization and the product morphology. FTIR analysis showed that the copolymeric chains of polyacrylamide (PAAm) and poly (acrylic acid) (PAAc) were chemically bonded to the surfaces of the nano-SiO₂ particles and silane-modified nano-SiO₂. The particulate character of microgel samples and the existence of long distance among aggregations of particles led to rapid swelling and increasing of porosity and therefore increasing of degree of swelling.

Synthesis of Sodium Carboxymethyl Cellulose/Poly(acrylic acid) Microgels via Visible-Light-Triggered Polymerization as a Self-Sedimentary Cationic Basic Dye Adsorbent

In this study, sodium carboxymethyl cellulose/poly(acrylic acid) (CMC/PAA) microgels were successfully synthesized via visible-light-triggered free-radical polymerization to remove methylene blue (MB) from water. The microgels had a loose and porous 3-D network structure, exhibiting excellent adsorption performance. The equilibrium adsorption capacity and the removal efficiency of the microgels reached approximately 1479 mg/g and 97%, respectively, when the initial concentration of MB was 300 mg/L. The adsorption kinetics was well described by the pseudo-second-order model, and the adsorption isotherms followed the Langmuir isothermal model. Notably, CMC/PAA microgels could naturally settle and be separated from the MB solution. Furthermore, the recovery efficiency of the regenerated CMC/PAA microgels reached approximately 94% after five adsorption-desorption cycles. Therefore, the microgels could be used as promising adsorbents due to the advantages of high adsorption capacity, fast removal rate, and reusability.

Adsorption of Hydrolysed Polyacrylamide onto Calcium Carbonate

Carbonate rock strengthening using chemical techniques is a strategy to prevent excessive fines migration during oil and gas production. We provide herein a study of the adsorption of three types of hydrolysed polyacrylamide (HPAM) of different molecular weight (F3330S, 11–13 MDa; F3530 S, 15–17 MDa; F3630S, 18–20 MDa) onto calcium carbonate (CaCO₃) particles via spectrophotometry using a Shimadzu UV-2600 spectrometer. The results are compared to different adsorption isotherms and kinetic models. The Langmuir isotherm shows the highest correlation coefficient (R² > 0.97) with equilibrium parameters (R_L) ranging between 0 and 1 for all three HPAMs, suggesting a favorable monolayer adsorption of HPAM onto CaCO₃. The adsorption follows pseudo-second order kinetics, indicating that the interaction of HPAM with CaCO₃ is largely dependent on the adsorbate concentration. An adsorption plot reveals that the amount of HPAM adsorbed onto CaCO₃ at equilibrium increases with higher polymer molecular weight; the equilibrium adsorbed values for F3330S, F3530S and F3630S are approximately 0.24 mg/m², 0.31 mg/m², and 0.43 mg/m², respectively. Zeta potential analysis shows that CaCO₃ has a zeta potential of +12.32 mV, which transitions into negative values upon introducing HPAM. The point of zero charge (PZC) is observed at HPAM dosage between 10 to 30 ppm, in which the pH here lies between 9–10.

Wrinkling on Stimuli-Responsive Functional Polymer Surfaces as a Promising Strategy for the Preparation of Effective Antibacterial/Antibiofouling Surfaces

Biocompatible smart interfaces play a crucial role in biomedical or tissue engineering applications, where their ability to actively change their conformation or physico-chemical properties permits finely tuning their surface attributes. Polyelectrolytes, such as acrylic acid, are a particular type of smart polymers that present pH responsiveness. This work aims to fabricate stable hydrogel films with reversible pH responsiveness that could spontaneously form wrinkled surface patterns. For this purpose, the photosensitive reaction mixtures were deposited via spin-coating over functionalized glasses. Following vacuum, UV, or either plasma treatments, it is possible to spontaneously form wrinkles, which could increase cell adherence. The pH responsiveness of the material was evaluated, observing an abrupt variation in the film thickness as a function of the environmental pH. Moreover, the presence of the carboxylic acid functional groups at the interface was evidenced by analyzing the adsorption/desorption capacity using methylene blue as a cationic dye model. The results demonstrated that increasing the acrylic acid in the microwrinkled hydrogel effectively improved the adsorption and release capacity and the ability of the carboxylic groups to establish ionic interactions with methylene blue. Finally, the role of the acrylic acid groups and the surface topography (smooth or wrinkled) on the final antibacterial properties were investigated, demonstrating their efficacy against both gram-positive and gram-negative bacteria model strains (E. coli and S. Aureus). According to our findings, microwrinkled hydrogels presented excellent antibacterial properties improving the results obtained for planar (smooth) hydrogels.

Monodisperse Selectively Permeable Hydrogel Capsules Made from Single Emulsion Drops

Capsules are often used to protect chemical and biological entities from the environment, to control the timing and location of their release, or to facilitate the collection of waste. Their performance depends on the thickness and composition of their shells, which can be closely controlled if capsules are made from double emulsion drops that are produced with microfluidics. However, the fabrication of such double emulsions is delicate, limiting throughput and increasing costs. Here, a fast, scalable method to produce monodisperse microcapsules possessing mechanically robust, thin, semipermeable hydrogel shells from single emulsion drops is introduced. This is achieved by selectively polymerizing reagents in close proximity to the drop surface to form a biocompatible 1.6 μm-thick hydrogel shell that encompasses a liquid core. The size-selective permeability of the shell enables the growth of living yeast and bacteria in their cores. Moreover, if capsules are loaded with adsorbents, they can repetitively remove waste products from water. The simplicity and robustness of the capsule fabrication makes the process scalable and cost effective. It has thus the potential to extend the use of calibrated capsules possessing well-defined dimensions to cost sensitive fields, including food, waste water treatment, or oil recovery.

Villi-like poly(acrylic acid) based hydrogel adsorbent with fast and highly efficient methylene blue removing ability

Organic dye-containing wastewater has become an increasingly serious environmental problem due to the rapid development of the printing and dyeing industry. Hydrogel is a promising adsorbent for organic dyes because of its unique three-dimension network structure and versatile functional groups. Though many efforts have been made in hydrogel adsorbents recently, there is still a critical challenge to fabricate hydrogel adsorbent with high adsorption capacity and high efficiency at the same time. To address this concern, we developed a calcium hydroxide nano-spherulites/poly(acrylic acid -[2-(Methacryloxy)ethyl]trimethyl ammonium chloride) hydrogel adsorbent with novel villi-like structure. The hydrogels were prepared through a simple free radical copolymerization method using calcium hydroxide nano-spherulites as crosslinker. The resultant hydrogel adsorbents showed a maximum adsorption capacity of 2249 mg/g in a 400 mg/L methylene blue solution and a high removal ratio of 98% in 1 h for a 50 mg/L methylene blue solution. In addition, the adsorption behaviors of our hydrogel adsorbents could be well described by pseudo-second-order kinetic model and Langmuir adsorption isotherm model. Furthermore, this kind of hydrogel adsorbent showed selective adsorption behavior for methylene blue. Altogether, the hydrogel adsorbent developed in this work has a high capacity and high efficiency in organic dye removing and promised a great potential in wastewater treatment application.

Solvothermal synthesis of poly(acrylic acid) decorated magnetic molybdenum disulfide nanosheets for highly-efficient adsorption of cationic dyes from aqueous solutions

Poly(acrylic acid) decorated magnetic MoS₂ nanosheets with high adsorption capacities for three cationic dyes have been successfully synthesized by a simple one-step solvothermal method.