Effects of modified poly(tetrafluoroethylene) on the p hysico‐mechanical and tribological properties of carbon‐black filled nitrile‐butadiene rubber

Mechanical Properties, Radiation Resistance Performances, and Mechanism Insights of Nitrile Butadiene Rubber Irradiated with High-Dose Gamma Rays

The radiation effect of materials is very important and directly related to the safety and reliability of nuclear reactors. Polymer materials, one of the indispensable materials in nuclear power equipment, must withstand the ordeal of high-energy ionizing rays. In this work, through screening different γ-ray dose irradiation conditions, we systematically and comprehensively study the changes in the structure and properties of nitrile butadiene rubber (NBR) before and after γ-ray static irradiation at a high dose rate, and master the rule and mechanism of the γ-ray static irradiation effect of these polymer materials. The mapping relationship between the macroscopic properties, microstructure, and irradiation dose of NBR is accurately characterized. With an increase in total irradiation dose, the C=C double bond reaction occurs, and the C≡N bond, C=C, and C=O participate in the hyper crosslinking reaction. The glass transition temperature (Tg) increases with the cumulative irradiation amount. With the increased total irradiation amount, the degree of rubber cross-linking increases, causing an increased crystallinity and decomposition temperature. A growing amount of gamma irradiation causes the mechanical properties of the rubber to degrade simultaneously, increasing the shore hardness while decreasing the tensile strength and ultimate elongation at break. When the cumulative amount reaches 1 MGy, the ultimate elongation at break decreases significantly. A cumulative dose of radiation resistance of 4 MGy can be achieved by the samples. This work can provide theoretical and experimental support for the long-term stability of nitrile butadiene rubber and its derivatives in nuclear radiation fields and space radiation conditions.

Experimental and Analytical Investigations on Tribological Properties of PTFE/AP Composites

The tribological properties of polytetrafluoroethylene (PTFE)/AP (poly(para-phenyleneterephthalamide) (PPTA) pulp) composites under different test conditions (load: 2N, 10N; frequency: 1 Hz, 4 Hz; amplitude: 2 mm, 8 mm) were holistically evaluated. PTFE/AP composites with different AP mass ratios of 3%, 6%, and 12% as a skeleton support material were prepared. The coefficient of friction (COF) and wear rate were determined on a ball-on-disk tribometer. Furthermore, the morphology, element composition, and chemical structure of the transfer membrane were analyzed accordingly. The relationships between load, frequency, amplitude, and tribological properties were further investigated. According to the wear mechanism, AP enables effective improvement in the stiffness and wear resistance, which is also conducive to the formation of transfer films.