Carbon quantum dots derived from rice straw doped with N and S and its nanocomposites with hydroxypropyl cellulose nanocomposite

As biomass, rice straw (RS) is often valorized as a precursor of green products. In this respect, the RS-based carbon quantum dots (CQDs) are synthesized doped with N and S during the preparation. Synergistic doping with lipoic acid and ethylenediamine can vastly increase the yield of CQD from rice straw from 6.14 % to 62.8 %, and sulfur doping plays a more important role on the surface functional groups of the quantum dots. Further assessment is achieved toward the performance of SN-CQDs-hydroxypropyl cellulose nanocomposites. The optical behavior of synthesized SN-CQDs, and the critical concentration of its liquid crystal behaviors, at which the anisotropic phase begins to emerge, is approximately 1 %. Incorporating it into HPC, especially at 5 %, provided nanocomposite films with effective liquid crystal, tensile strength, and thermal stability. This sample's texture reveals a planar structure with colors ranging from yellow to red. The synergistic effect of incorporating SN-CQDs is shown by improving the strength to ~282.1 %, and the activation energy increased from 583.6 kJ.mol-1 to 615.1 kJ/mol. HPC-SN-CQDs can be assembled into an LED device, emitting warm light, of which CIE coordinate is (0.34,0.43).

Tuning thermoresponsive properties of carboxymethyl cellulose (CMC)-agarose composite bioinks to fabricate complex 3D constructs for regenerative medicine

3D bioprinting has emerged as a viable tool to fabricate 3D tissue constructs with high precision using various bioinks which offer instantaneous gelation, shape fidelity, and cytocompatibility. Among various bioinks, cellulose is the most abundantly available natural polymer & widely used as bioink for 3D bioprinting applications. To mitigate the demanding crosslinking needs of cellulose, it is frequently chemically modified or blended with other polymers to develop stable hydrogels. In this study, we have developed a thermoresponsive, composite bioink using carboxymethyl cellulose (CMC) and agarose in different ratios (9:1, 8:2, 7:3, 6:4, and 5:5). Among the tested combinations, the 5:5 ratio showed better gel formation at 37 °C and were further characterized for physicochemical properties. Cytocompatibility was assessed by in vitro extract cytotoxicity assay (ISO 10993-5) using skin fibroblasts cells. CMC-agarose (5:5) bioink was successfully used to fabricate complex 3D structures through extrusion bioprinting and maintained over 80 % cell viability over seven days. Finally, in vivo studies using rat full-thickness wounds showed the potential of CMC-agarose bulk and bioprinted gels in promoting skin regeneration. These results indicate the cytocompatibility and suitability of CMC-agarose bioinks for tissue engineering and 3D bioprinting applications.

Ethyl cellulose/gelatin/β-cyclodextrin/curcumin nanofibrous membrane with antibacterial and formaldehyde adsorbable capabilities for lightweight and high-performance air filtration

Functionalization of bio-based nanofibers is the development tendency of high-performance air filter. However, the conventional structural optimization strategy based on high solution conductivity greatly hinders the development of fully bio-based air filter, and not conducive to sustainable development. This work fabricated fully bio-based nanofibrous membrane with formaldehyde-adsorbable and antibacterial capabilities by electrospinning low-conductivity solution for high-performance air filtration and applied to lightweight mask. The "water-like" ethyl cellulose (EC) was selected as the base polymer to "nourish" functional materials of gelatin (GE), β-cyclodextrin (βCD), and curcumin (Cur), thus forming a solution system with high binding energy differences and electrospinning into ultrafine bimodal nanofibers. The filtration efficiency for 0.3 μm NaCl particles, pressure drop, and quality factor were 99.25 %, 53 Pa, and 0.092 Pa-1, respectively; the bacteriostatic rates against Escherichia coli and Staphylococcus aureus were 99.9 % and 99.4 %, respectively; the formaldehyde adsorption capacity was 442 μg/g. This is the first report on antibacterial and formaldehyde-adsorbable high-performance air filter entirely made from bio-based materials. This simple strategy will greatly broaden the selection of materials for preparing high-performance multifunctional air filter, and promote the development of bio-based air filter.

Upcycling polyethylene terephthalate wastes for enhancing the performance of polyester from rice straw polyol in HDPE-composites

Upscaling the utilization of polymer wastes together with the valorization of undesirable waste rice straw (RS) will minimize the environmental impact of waste disposal by traditional tools. This present work assesses the utilization of polyethylene terephthalate wastes in enhancing the production of polyester-(high density polyethylene) HDPE from Rice straw polyol composites. In this respect, the polyester from rice straw polyol in hybrid with glycolysis polyethylene terephthalate wastes (Gly-WPET) was assessed in comparison with that resulted from RS-polyol, using FTIR, non-isothermal analysis, and mechanical tests. The data showed the positive role of Gly-WPET in hybrid with RS-polyol in production polyester with high thermal stability and mechanical properties. It provided an increase in activation energy of degradation, elongation, Young's Modulus, and modulus of toughness from 184.5 to 1201 kJ/mole, from 4.7 to 9.8%, from 47.5 to 66.5 MPa, and from ~ 4.0 to 23 J/m3, respectively. This behavior was reflected in the properties of HDPE-polyester polyol (PEPO) composites, especially in improving elongation (from 55.4 to 72%). These promising data persuade us to recommend the influential role of Gly-WPET in using PEPO from liquefied RS as a plasticizer.

Impact of pulping routes of rice straw on cellulose nanoarchitectonics and their behavior toward Indigo dye

This work deals with emphasizing the relation between particle dimension distribution of nanocellulose (PDD) particles with its efficiency as stabilizing/adsorbent agent of Indigo dye. In this respect, different pulping reagents were used in preparation of Rice straw pulps as precursors for nanocelluloses using acid hydrolysis and oxidizing agents [(KMnO4 and NH4)2S2O8] methods. The PDD was estimated by indirect method through processing the TEM images using the software ImageJ. The resulting nanocelluloses were also characterized by X-ray diffraction (XRD) and Fourier-transform infrared spectra (FTIR) together with sulfate ester and carboxyl contents. The data showed the effective role of pulping reagent on PDD. The cellulose nanocrystals (CNCs) from NaOH-AQ pulp, with the longest crystal length (204.4 ± 107.8 nm) and the lowest diameter (6.7 ± 2.3 nm), exhibited most stabilized suspension of dye; however, the highest adsorption capacity was accompanied the oxidized nanocellulose (Ox-NC) from neutral RS pulp with lowest PDD (4.98 ± 1.6 and 90.5 ± 3.14), together with highest COO content (476.46 μmol/g).

Study on Adsorption Performance of Benzoic Acid in Cyclocarya paliurus Extract by Ethyl Cellulose Microspheres

Polymer microspheres with inter-connecting pores are widely used as microsphere materials. In the study, the ethyl cellulose microspheres (ECM) were prepared by using the solvent-evaporation method. Based on that, a method for the separation and purification of benzoic acid from crude extract of Cyclocarya paliurus was established by the ECM and high performance liquid chromatography (HPLC). The ECM after the sorption equilibrium was desorbed by using 40% methanol as the analytical solvent. The content of benzoic acid in eluent is up to 0.0216 mg/mL, and the benzoic acid can be obtained with a high purity of 82.22%. Furthermore, the adsorption-desorption behavior of benzoic acid onto ECM was investigated. The results of adsorption kinetics of benzoic acid showed that the adsorption followed the pseudo-first-order kinetic model. The ECM was characterized by using Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), scanning electron microscope (SEM), and X-ray diffraction (XRD). The results showed that the ECM has a high adsorption property due to its more porous structure, phenolic hydroxyl group, and other oxygen-containing functional groups. This method and the ECM can be used stably, continuously, and efficiently to purify the benzoic acid from the methanol extract of C. paliurus on a large scale.