Trabecular bone structure in the humeral and femoral heads of anthropoid primates

Trabecular architecture of the distal femur in extant hominids

Extant great apes are characterized by a wide range of locomotor, postural and manipulative behaviours that each require the limbs to be used in different ways. In addition to external bone morphology, comparative investigation of trabecular bone, which (re-)models to reflect loads incurred during life, can provide novel insights into bone functional adaptation. Here, we use canonical holistic morphometric analysis (cHMA) to analyse the trabecular morphology in the distal femoral epiphysis of Homo sapiens (n = 26), Gorilla gorilla (n = 14), Pan troglodytes (n = 15) and Pongo sp. (n = 9). We test two predictions: (1) that differing locomotor behaviours will be reflected in differing trabecular architecture of the distal femur across Homo, Pan, Gorilla and Pongo; (2) that trabecular architecture will significantly differ between male and female Gorilla due to their different levels of arboreality but not between male and female Pan or Homo based on previous studies of locomotor behaviours. Results indicate that trabecular architecture differs among extant great apes based on their locomotor repertoires. The relative bone volume and degree of anisotropy patterns found reflect habitual use of extended knee postures during bipedalism in Homo, and habitual use of flexed knee posture during terrestrial and arboreal locomotion in Pan and Gorilla. Trabecular architecture in Pongo is consistent with a highly mobile knee joint that may vary in posture from extension to full flexion. Within Gorilla, trabecular architecture suggests a different loading of knee in extension/flexion between females and males, but no sex differences were found in Pan or Homo, supporting our predictions. Inter- and intra-specific variation in trabecular architecture of distal femur provides a comparative context to interpret knee postures and, in turn, locomotor behaviours in fossil hominins.

Analysis of bone structure in PEROMYSCUS: Effects of burrowing behavior

We compare the effects of burrowing behavior on appendicular bone structure in two Peromyscus (deer mouse) species. P. polionotus creates complex burrows in their territories, while P. eremicus is a non-burrowing nesting mouse. We examined museum specimens' bones of wild-caught mice of the two species and lab-reared P. polionotus not given the opportunity to burrow. Bones were scanned using micro-computed tomography, and cortical and trabecular bone structural properties were quantified. Wild P. polionotus mice had a larger moment of area in the ulnar and tibial cortical bone compared with their lab-reared counterparts, suggesting developmental adaptation to bending resistance. Wild P. polionotus had a larger normalized second moment of area and cross-sectional area in the tibia compared with P. eremicus. Tibial trabecular analysis showed lower trabecular thickness and spacing in wild P. polionotus than in P. eremicus and femoral analysis showed wild P. polionotus had lower thickness than P. eremicus and lower spacing than lab-reared P. polionotus, suggesting adaptation to high loads from digging. Results lay the groundwork for future exploration of the ontogenetic and evolutionary basis of mechanoadaptation in Peromyscus.

Trabecular bone volume fraction in Holocene and Late Pleistocene humans

Research suggests that recent modern humans have gracile skeletons in having low trabecular bone volume fraction (BV/TV) and that gracilization of the skeleton occurred in the last 10,000 years. This has been attributed to a reduction in physical activity in the Holocene. However, there has been no thorough sampling of BV/TV in Pleistocene humans due to limited access to high resolution images of fossil specimens. Therefore, our study investigates the gracilization of BV/TV in Late Pleistocene humans and recent (Holocene) modern humans to improve our understanding of the emergence of gracility. We used microcomputed tomography to measure BV/TV in the femora, humeri and metacarpals of a sample of Late Pleistocene humans from Dolní Věstonice (Czech Republic, ∼26 ka, n = 6) and Ohalo II (Israel, ∼19 ka, n = 1), and a sample of recent humans including farming groups (n = 39) and hunter-gatherers (n = 6). We predicted that 1) Late Pleistocene humans would exhibit greater femoral and humeral head BV/TV compared with recent humans and 2) among recent humans, metacarpal head BV/TV would be greater in hunter-gatherers compared with farmers. Late Pleistocene humans had higher BV/TV compared with recent humans in both the femur and humerus, supporting our first prediction, and consistent with previous findings that Late Pleistocene humans are robust as compared to recent humans. However, among recent humans, there was no significant difference in BV/TV in the metacarpals between the two subsistence groups. The results highlight the similarity in BV/TV in the hand of two human groups from different geographic locales and subsistence patterns and raise questions about assumptions of activity levels in archaeological populations and their relationships to trabecular BV/TV.

Small skeletons show size-specific scaling: an exploration of allometry in the mammalian lumbar spine

Studies of vertebrate bone biomechanics often focus on skeletal adaptations at upper extremes of body mass, disregarding the importance of skeletal adaptations at lower extremes. Yet mammals are ancestrally small and most modern species have masses under 5 kg, so the evolution of morphology and function at small size should be prioritized for understanding how mammals subsist. We examined allometric scaling of lumbar vertebrae in the small-bodied Philippine endemic rodents known as cloud rats, which vary in mass across two orders of magnitude (15.5 g-2700 g). External vertebral dimensions scale with isometry or positive allometry, likely relating to body size and nuances in quadrupedal posture. In contrast to most mammalian trabecular bone studies, bone volume fraction and trabecular thickness scale with positive allometry and isometry, respectively. It is physiologically impossible for these trends to continue to the upper extremes of mammalian body size, and we demonstrate a fundamental difference in trabecular bone allometry between large- and small-bodied mammals. These findings have important implications for the biomechanical capabilities of mammalian bone at small body size; for the selective pressures that govern skeletal evolution in small mammals; and for the way we define 'small' and 'large' in the context of vertebrate skeletons.

Linking morphology, performance, and habitat utilization: adaptation across biologically relevant 'levels' in tamarins

BACKGROUND

Biological adaptation manifests itself at the interface of different biologically relevant 'levels', such as ecology, performance, and morphology. Integrated studies at this interface are scarce due to practical difficulties in study design. We present a multilevel analysis, in which we combine evidence from habitat utilization, leaping performance and limb bone morphology of four species of tamarins to elucidate correlations between these 'levels'.

RESULTS

We conducted studies of leaping behavior in the field and in a naturalistic park and found significant differences in support use and leaping performance. Leontocebus nigrifrons leaps primarily on vertical, inflexible supports, with vertical body postures, and covers greater leaping distances on average. In contrast, Saguinus midas and S. imperator use vertical and horizontal supports for leaping with a relatively similar frequency. S. mystax is similar to S. midas and S. imperator in the use of supports, but covers greater leaping distances on average, which are nevertheless shorter than those of L. nigrifrons. We assumed these differences to be reflected in the locomotor morphology, too, and compared various morphological features of the long bones of the limbs. According to our performance and habitat utilization data, we expected the long bone morphology of L. nigrifrons to reflect the largest potential for joint torque generation and stress resistance, because we assume longer leaps on vertical supports to exert larger forces on the bones. For S. mystax, based on our performance data, we expected the potential for torque generation to be intermediate between L. nigrifrons and the other two Saguinus species. Surprisingly, we found S. midas and S. imperator having relatively more robust morphological structures as well as relatively larger muscle in-levers, and thus appearing better adapted to the stresses involved in leaping than the other two.

CONCLUSION

This study demonstrates the complex ways in which behavioral and morphological 'levels' map onto each other, cautioning against oversimplification of ecological profiles when using large interspecific eco-morphological studies to make adaptive evolutionary inferences.

Macroscopic differences in adult human femora are linked to body mass index

Bone functional adaptation is routinely invoked to interpret skeletal morphology despite ongoing debate regarding the limits of the bone response to mechanical stimuli. The wide variation in human body mass presents an opportunity to explore the relationship between mechanical load and skeletal response in weight-bearing elements. Here, we examine variation in femoral macroscopic morphology as a function of body mass index (BMI), which is used as a metric of load history. A sample of 80 femora (40 female; 40 male) from recent modern humans was selected from the Texas State University Donated Skeletal Collection. Femora were imaged using x-ray computed tomography (voxel size ~0.5 mm), and segmented to produce surface models. Landmark-based geometric morphometric analyses based on the Coherent Point Drift algorithm were conducted to quantify shape. Principal components analyses were used to summarize shape variation, and component scores were regressed on BMI. Within the male sample, increased BMI was associated with a mediolaterally expanded femoral shaft, as well as increased neck-shaft angle and decreased femoral neck anteversion angle. No statistically significant relationships between shape and BMI were found in the female sample. While mechanical stimulus has traditionally been applied to changes in long bong diaphyseal shape it appears that bone functional adaptation may also result in fundamental changes in the shape of skeletal elements.

Trabecular bone morphology in big cats reflects the complex diversity of limb use but not home range size or daily travel distance

A relationship exists between mechanical loading and bone morphology. Although studies show a relationship between trabecular bone morphology and locomotor strategy in mammals, none of them have studied trabecular bone morphology in felid species occupying disparate and overlapping habitats. We investigate trabecular bone volume fraction (BVF) in the femoral and humeral heads, and distal tibia of four felid species (mountain lions, jaguars, cheetahs, and leopards) to identify whether there is a relationship between BVF and locomotor behavior. This study's goals are to identify whether felid species with high daily travel distance or large home range size have greater BVF compared with those with small daily travel distance or home range size, and whether BVF is correlated among the three elements of the fore and hindlimb studied. We quantified BVF in micro- and peripheral computed tomography images and found no significant differences across species in the femoral and humeral head (p > 0.05). However, in the distal tibia, results showed that leopards, mountain lions, and cheetahs have significantly greater (p < 0.05) BVF than jaguars. Despite differences in home range size and daily travel distance, the proximal elements did not reflect differences in BVF; however, the distal-most element did, suggesting decreased loading among jaguars. These findings suggest that the observed pattern of trabecular bone morphology is potentially due to the diversity in locomotor strategy of the forelimb. Additionally, these results imply that neither home range size nor daily travel distance are clear indicators of activity levels. A cautious approach is warranted in studying how loading influences trabecular morphology.

Testing mechanisms for weight support distribution during inverted quadrupedalism in primates

A key characteristic of primate above-branch arboreal locomotion is hindlimb-biased weight support, subverting the typical mammalian condition in which the majority of the body weight is supported by the forelimb. This shift is thought to reflect an adaptation toward the arboreal niches exploited by early primates. However, above-branch quadrupedalism represents only one locomotor mode employed by primates in arboreal contexts. Inverted quadrupedal gaits, in which primates are suspended beneath branches by their hands and feet, have been documented in more than 50 primate taxa. This gait is characterized by a return to forelimb-biased weight distributions and a transition from peak vertical forces being greatest in the hindlimb to being greatest in the forelimb, which may occur to protect the hindlimb from high magnitudes of tensile loading when inverted. In this study, we compare kinetic and kinematic data during upright and inverted quadrupedalism in Lemur catta, Varecia variegata, Cebus capucinus, and Saimiri sciureus. These data are referenced against a classical inverted quadrupedal model: the two-toed sloth (Choloepus didactylus). Our findings show that inverted quadrupedalism in primates is differentiated from above-branch quadrupedalism by increases in forelimb weight support, forelimb contact times, and both forelimb and hindlimb joint excursions. Previously postulated biomechanical models outlining mechanisms relating to the control of weight support during upright walking do not translate well to inverted quadrupedal walking. We suggest that inverted primates may simply be adopting basal neuromuscular gait characteristics and applying them facultatively to this infrequent locomotor behavior.

Ontogenetic Patterning of Human Subchondral Bone Microarchitecture in the Proximal Tibia

High-resolution computed tomography images were acquired for 31 proximal human tibiae, age 8 to 37.5 years, from Norris Farms #36 cemetery site (A.D. 1300). Morphometric analysis of subchondral cortical and trabecular bone architecture was performed between and within the tibial condyles. Kruskal−Wallis and Wilcoxon signed-rank tests were used to examine the association between region, age, body mass, and each morphometric parameter. The findings indicate that age-related changes in mechanical loading have varied effects on subchondral bone morphology. With age, trabecular microstructure increased in bone volume fraction (p = 0.033) and degree of anisotropy (p = 0.012), and decreased in connectivity density (p = 0.001). In the subchondral cortical plate, there was an increase in thickness (p < 0.001). When comparing condylar regions, only degree of anisotropy differed (p = 0.004) between the medial and lateral condyles. Trabeculae in the medial condyle were more anisotropic than in the lateral region. This research represents an innovative approach to quantifying both cortical and trabecular subchondral bone microarchitecture in archaeological remains.

One-Year Postfracture Mortality Rate in Older Adults With Hip Fractures Relative to Other Lower Extremity Fractures: Retrospective Cohort Study

BACKGROUND

Hip fracture in older adults is tied to increased mortality risk. Deconvolution of the mortality risk specific to hip fracture from that of various other fracture types has not been performed in recent hip fracture studies but is critical to determining current unmet needs for therapeutic intervention.

OBJECTIVE

This study examined whether hip fracture increases the 1-year postfracture mortality rate relative to several other fracture types and determined whether dementia or type 2 diabetes (T2D) exacerbates postfracture mortality risk.

METHODS

TriNetX Diamond Network data were used to identify patients with a single event of fracture of the hip, the upper humerus, or several regions near and distal to the hip occurring from 60 to 89 years of age from 2010 to 2019. Propensity score matching, Kaplan-Meier, and hazard ratio analyses were performed for all fracture groupings relative to hip fracture. One-year postfracture mortality rates in elderly populations with dementia or T2D were established.

RESULTS

One-year mortality rates following hip fracture consistently exceeded all other lower extremity fracture groupings as well as the upper humerus. Survival probabilities were significantly lower in the hip fracture groups, even after propensity score matching was performed on cohorts for a variety of broad categories of characteristics. Dementia in younger elderly cohorts acted synergistically with hip fracture to exacerbate the 1-year mortality risk. T2D did not exacerbate the 1-year mortality risk beyond mere additive effects.

CONCLUSIONS

Elderly patients with hip fracture have a significantly decreased survival probability. Greatly increased 1-year mortality rates following hip fracture may arise from differences in bone quality, bone density, trauma, concomitant fractures, postfracture treatments or diagnoses, restoration of prefracture mobility, or a combination thereof. The synergistic effect of dementia may suggest detrimental mechanistic or behavioral combinations for these 2 comorbidities. Renewed efforts should focus on modulating the mechanisms behind this heightened mortality risk, with particular attention to mobility and comorbid dementia.

Ontogenetic changes to metacarpal trabecular bone structure in mountain and western lowland gorillas

The trabecular bone morphology of adult extant primates has been shown to reflect mechanical loading related to locomotion. However, ontogenetic studies of humans and other mammals suggest an adaptive lag between trabecular bone response and current mechanical loading patterns that could result in adult trabecular bone morphology reflecting juvenile behaviours. This study investigates ontogenetic changes in the trabecular bone structure of the third metacarpal of mountain gorillas (Gorilla beringei beringei; n = 26) and western lowland gorillas (Gorilla gorilla gorilla; n = 26) and its relationship to expected changes in locomotor loading patterns. Results show that trabecular bone reflects predicted mechanical loading throughout ontogeny. Bone volume fraction, trabecular thickness and trabecular number are low at birth and increase with age, although degree of anisotropy remains relatively stable throughout ontogeny. A high concentration of bone volume fraction can be observed in the distopalmar region of the third metacarpal epiphysis in early ontogeny, consistent with the high frequency of climbing, suspensory and other grasping behaviours in young gorillas. High trabecular bone concentration increases dorsally in the epiphysis during the juvenile period as terrestrial knuckle-walking becomes the primary form of locomotion. However, fusion of the epiphysis does not take place until 10-11 years of age, and overall trabecular structure does not fully reflect the adult pattern until 12 years of age, indicating a lag between adult-like behaviours and adult-like trabecular morphology. We found minimal differences in trabecular ontogeny between mountain and western lowland gorillas, despite presumed variation in the frequencies of arboreal locomotor behaviours. Altogether, ontogenetic changes in Gorilla metacarpal trabecular structure reflect overall genus-level changes in locomotor behaviours throughout development, but with some ontogenetic lag that should be considered when drawing functional conclusions from bone structure in extant or fossil adolescent specimens.

Trabecular structure of the elbow reveals divergence in knuckle-walking biomechanical strategies of African apes

African apes engage in a distinct form of locomotion called knuckle-walking, but there is much ambiguity as to when and how this locomotor behavior evolved. This study aims to elucidate potential differences in knuckle-walking elbow posture and loading in African apes through the study of trabecular bone. Using a whole-epiphysis approach, we quantified variation in the trabecular structure of the distal humerus of chimpanzees, western lowland gorillas, and mountain gorillas in comparison to orang-utans, siamangs, and a sample of Old and New World monkeys. Results demonstrate differences in the distribution of trabecular bone within the distal humerus that are consistent across taxa that habitually use a flexed-elbow posture in comparison to those that use an extended elbow during locomotion. Western lowland gorillas show an extended-elbow pattern consistent with the straight forelimb position during knuckle-walking, whereas chimpanzees show a flexed-elbow pattern. Unexpectedly, mountain gorillas show an intermediate pattern between their western counterparts and chimpanzees. The differences found in elbow joint posture between chimpanzees and gorillas, and between gorilla species, point to diversification in the knuckle-walking biomechanical strategies among African apes, which has implications in the debate regarding the locomotor behavior from which human bipedalism arose.

The Functional and Allometric Implications of Hipbone Trabecular Microarchitecture in a Sample of Eutherian and Metatherian Mammals

The pelvis plays an active role in weight bearing and countering the ground reaction forces incurred by the hindlimbs thus making it a critical component of the locomotor skeleton. Accordingly, this anatomical region is theoretically ideal for inferring locomotor behavior from both external skeletal morphology and trabecular microarchitecture, with the latter possibly offering nuanced insights into the mechanical loading environment given its increased plasticity and higher turnover rate. However, trabecular microarchitecture is also known to be influenced by a variety of factors including body size, sex, age, genetic regulation, diet and activity level, that collectively hinder the ability to generate consistent functional inferences. In this study, a comparative sample of mammals (42 species spanning four orders) of varying sizes, yet comparable locomotor repertoires, were evaluated to determine the effects of body size, phylogeny and locomotion on hipbone trabecular microarchitecture. This study found a weak functional signal detected in differences in bone volume fraction and the degree of anisotropy across certain pre-assigned locomotor categories, while confirming previously recognized allometric scaling trends reported for other mammalian samples based on the femur. Within primates, a more anisotropic pattern was observed for quadrupedal species attributed to their repetitive loading regimes and stereotypical limb excursions, while isotropic values were revealed for taxa utilizing more varied arboreal repertoires. Humans, despite a frequent and predictable loading environment associated with their use of bipedalism, showed relatively isotropic values. This study highlights the confounding factors that influence trabecular microarchitecture and consequently limit its utility as a method for investigating locomotor adaptation.

Trabecular organization of the proximal femur in Paranthropus robustus: Implications for the assessment of its hip joint loading conditions

Reconstruction of the locomotor repertoire of the australopiths (Australopithecus and Paranthropus) has progressively integrated information from the mechanosensitive internal structure of the appendicular skeleton. Recent investigations showed that the arrangement of the trabecular network at the femoral head center is biomechanically compatible with the pattern of cortical bone distribution across the neck, both suggesting a full commitment to bipedalism in australopiths, but associated with a slightly altered gait kinematics compared to Homo involving more lateral deviation of the body center of mass over the stance limb. To provide a global picture in Paranthropus robustus of the trabecular architecture of the proximal femur across the head, neck and greater trochanter compartments, we applied techniques of virtual imaging to the variably preserved Early Pleistocene specimens SK 82, SK 97, SK 3121, SKW 19 and SWT1/LB-2 from the cave site of Swartkrans, South Africa. We also assessed the coherence between the structural signals from the center of the head and those from the trabecular network of the inferolateral portion of the head and the inferior margin of the neck, sampling the so-called vertical bundle, which in humans represents the principal compressive system of the joint. Our analyses show a functionally related trabecular organization in Pa. robustus that closely resembles the extant human condition, but which also includes some specificities in local textural arrangement. The network of the inferolateral portion of the head shows a humanlike degree of anisotropy and a bone volume fraction intermediate between the extant human and the African ape patterns. These results suggest slight differences in gait kinematics between Pa. robustus and extant humans. The neck portion of the vertical bundle revealed a less biomechanically sensitive signal. Future investigations on the australopith hip joint loading environment should more carefully investigate the trabecular structure of the trochanteric region and possible structural covariation between cortical bone distribution across the neck and site-specific trabecular properties of the arcuate bundle.

Quantitative analysis of metacarpophalangeal joints during active flexion using four-dimensional computed tomography

BACKGROUND

The metacarpophalangeal joint has a unique morphology with a high degree of freedom. However, few studies have analyzed the kinematics of fingers owing to the rapid movement of the small bones involved. The in-vivo kinematics of metacarpophalangeal joints were analyzed by four-dimensional computed tomography (4DCT) and associated with its morphology.

METHODS

The flexion motion of the fingers of bilateral hands in 10 volunteers were examined using 4DCT. Iterative surfaces were registered to trace the surface of the proximal phalanges with respect to metacarpals. Rotation angles were calculated using Euler/Cardan angles.

FINDINGS

In the index finger, the proximal phalange supinated to a maximum flexion of 40° and then pronated, and its range of rotation was larger than the previous reports. In the other fingers, the proximal phalanges continued to supinate during flexion. The helical axis of the proximal phalange passed a point extremely close to the center point of bilateral condyles, and it moved toward the proximal and palmar directions until the middle stage of flexion and toward the proximal and dorsal directions during the late stage of flexion. The translation of the rotation axis was larger in the ring and little fingers.

INTERPRETATION

The rotation in the index finger was larger than previously reported. The helical axes moved in the dorsal direction and proximally during the latter phase of the flexion. These results can be employed to better understand the causes of implant failure of the metacarpophalangeal joints.

Using point clouds to investigate the relationship between trabecular bone phenotype and behavior: An example utilizing the human calcaneus

OBJECTIVES

The objective of this study is to demonstrate a new method for analyzing trabecular bone volume fraction and degree of anisotropy in three dimensions.

METHODS

We use a combination of automatic mesh registration, point-cloud correspondence registration, and P-value corrected univariate statistical tests to compare bone volume fraction and degree of anisotropy on a point by point basis across the entire calcaneus of two human groups with different subsistence strategies.

RESULTS

We found that the patterns of high and low bone volume fraction and degree of anisotropy distribution between the Black Earth (hunter-gatherers) and Norris Farms (mixed-strategy agriculturalists) are very similar, but differ in magnitude. The hunter-gatherers exhibit higher levels of bone volume fraction and less anisotropic trabecular bone organization. Additionally, patterns of bone volume fraction and degree of anisotropy in the calcaneus correspond well with biomechanical expectations of relative forces experienced during walking and running.

CONCLUSIONS

We conclude that comparing site-specific, localized differences in trabecular bone variables such as bone volume fraction and degree of anisotropy in three-dimensions is a powerful analytical tool. This method makes it possible to determine where similarities and differences between groups are located within the whole skeletal element of interest. The visualization of multiple variables also provides a way for researchers to see how the trabecular bone variables interact within the morphology, and allows for a more nuanced understanding of how they relate to one another and the broader mechanical environment.

Internal architecture of the mandibular condyle of rabbits is related to dietary resistance during growth

Although there is considerable evidence that bone responds to the loading environment in which it develops, few analyses have examined phenotypic plasticity or bone functional adaptation in the masticatory apparatus. Prior work suggests that masticatory morphology is sensitive to differences in food mechanical properties during development; however, the importance of the timing/duration of loading and variation in naturalistic diets is less clear. Here, we examined microstructural and macrostructural differences in the mandibular condyle in four groups of white rabbits (Oryctolagus cuniculus) raised for a year on diets that varied in mechanical properties and timing of the introduction of mechanically challenging foods, simulating seasonal variation in diet. We employed sliding semilandmarks to locate multiple volumes of interest deep to the mandibular condyle articular surface, and compared bone volume fraction, trabecular thickness and spacing, and condylar size/shape among experimental groups. The results reveal a shared pattern of bony architecture across the articular surface of all treatment groups, while also demonstrating significant among-group differences. Rabbits raised on mechanically challenging diets have significantly increased bone volume fraction relative to controls fed a less challenging diet. The post-weaning timing of the introduction of mechanically challenging foods also influences architectural properties, suggesting that bone plasticity can extend well into adulthood and that bony responses to changes in loading may be rapid. These findings demonstrate that bony architecture of the mandibular condyle in rabbits responds to variation in mechanical loading during an organism's lifetime and has the potential to track dietary variation within and among species.

Trabecular bone architecture in the stylopod epiphyses of mustelids (Mammalia, Carnivora)

Mustelidae, a carnivoran clade that includes for instance weasels, badgers, otters and martens, has undergone several evolutionary transitions of lifestyle, resulting in specializations for fossorial, natatorial and scansorial locomotion, in addition to more generalized species. The family is therefore regarded as offering an adequate framework for morpho-functional analyses. However, the architecture of the epiphyseal trabecular bone, which is argued to be particularly responsive to the biomechanical environment, has never been studied. Here, we quantify trabecular bone parameters of the proximal and distal epiphyses of the humerus and femur in 29 species of mustelids and assess the differences of these parameters among groups defined a priori based on the aforementioned locomotor types. The parameters are assessed in a phylogenetic framework, taking into account the potential effect on an individual's body mass. The range of variation described by the acquired parameters is relatively restricted when compared to that of other clades. Generalists, however, are featuring a wider range of variation than the other types. While clear discrimination of locomotor types is difficult, some differences were highlighted by our analysis, such as a greater bone fraction associated with the natatorial taxa, which we discuss in a functional context.

Metacarpal trabecular bone varies with distinct hand-positions used in hominid locomotion

Trabecular bone remodels during life in response to loading and thus should, at least in part, reflect potential variation in the magnitude, frequency and direction of joint loading across different hominid species. Here we analyse the trabecular structure across all non-pollical metacarpal distal heads (Mc2-5) in extant great apes, expanding on previous volume of interest and whole-epiphysis analyses that have largely focused on only the first or third metacarpal. Specifically, we employ both a univariate statistical mapping and a multivariate approach to test for both inter-ray and interspecific differences in relative trabecular bone volume fraction (RBV/TV) and degree of anisotropy (DA) in Mc2-5 subchondral trabecular bone. Results demonstrate that whereas DA values only separate Pongo from African apes (Pan troglodytes, Pan paniscus, Gorilla gorilla), RBV/TV distribution varies with the predicted loading of the metacarpophalangeal (McP) joints during locomotor behaviours in each species. Gorilla exhibits a relatively dorsal distribution of RBV/TV consistent with habitual hyper-extension of the McP joints during knuckle-walking, whereas Pongo has a palmar distribution consistent with flexed McP joints used to grasp arboreal substrates. Both Pan species possess a disto-dorsal distribution of RBV/TV, compatible with multiple hand postures associated with a more varied locomotor regime. Further inter-ray comparisons reveal RBV/TV patterns consistent with varied knuckle-walking postures in Pan species in contrast to higher RBV/TV values toward the midline of the hand in Mc2 and Mc5 of Gorilla, consistent with habitual palm-back knuckle-walking. These patterns of trabecular bone distribution and structure reflect different behavioural signals that could be useful for determining the behaviours of fossil hominins.

Femoral neck and shaft structure in Homo naledi from the Dinaledi Chamber (Rising Star System, South Africa)

The abundant femoral assemblage of Homo naledi found in the Dinaledi Chamber provides a unique opportunity to test hypotheses regarding the taxonomy, locomotion, and loading patterns of this species. Here we describe neck and shaft cross-sectional structure of all the femoral fossils recovered in the Dinaledi Chamber and compare them to a broad sample of fossil hominins, recent humans, and extant apes. Cross-sectional geometric (CSG) properties from the femoral neck (base of neck and midneck) and diaphysis (subtrochanteric region and midshaft) were obtained through CT scans for H. naledi and through CT scans or from the literature for the comparative sample. The comparison of CSG properties of H. naledi and the comparative samples shows that H. naledi femoral neck is quite derived with low superoinferior cortical thickness ratio and high relative cortical area. The neck appears superoinferiorly elongated because of two bony pilasters on its superior surface. Homo naledi femoral shaft shows a relatively thick cortex compared to the other hominins. The subtrochanteric region of the diaphysis is mediolaterally elongated resembling early hominins while the midshaft is anteroposteriorly elongated, indicating high mobility levels. In term of diaphyseal robusticity, the H. naledi femur is more gracile that other hominins and most apes. Homo naledi shows a unique combination of characteristics in its femur that undoubtedly indicate a species committed to terrestrial bipedalism but with a unique loading pattern of the femur possibly consequence of the unique postcranial anatomy of the species.

An Algorithm for Automated Separation of Trabecular Bone From Variably Thick Cortices in High-Resolution Computed Tomography Data

OBJECTIVE

Structural measurements after separation of cortical from trabecular bone are of interest to a wide variety of communities but are difficult to obtain because of the lack of accurate automated techniques.

METHODS

We present a structure-based algorithm for separating cortical from trabecular bone in binarized images. Using the thickness of the cortex as a seed value, bone connected to the cortex within a spatially local threshold value is identified and separated from the remaining bone. The algorithm was tested on seven biological data sets from four species imaged using micro-computed tomography (μ-CT) and high-resolution peripheral quantitative computed tomography (HR-pQCT). Area and local thickness measurements were compared to images segmented manually.

RESULTS

The algorithm was approximately 11 times faster than manual measurements and the median error in cortical area was -4.47 ± 4.15%. The median error in cortical thickness was approximately 0.5 voxels for μ-CT data and less than 0.05 voxels for HR-pQCT images resulting in an overall difference of -28.1 ± 71.1 μm.

CONCLUSION

A simple and readily implementable methodology has been developed that is repeatable, efficient, and requires few user inputs, providing an unbiased means of separating cortical from trabecular bone.

SIGNIFICANCE

Automating the segmentation of variably thick cortices will allow for the evaluation of large data sets in a time-efficient manner and allow for full-field analyses that have been previously limited to small regions of interest. The MATLAB code can be downloaded from https://github.com/TBL-UIUC/downloads.git.

Trabecular architecture in the humeral metaphyses of non-avian reptiles (Crocodylia, Squamata and Testudines): Lifestyle, allometry and phylogeny

The lifestyle of extinct tetrapods is often difficult to assess when clear morphological adaptations such as swimming paddles are absent. According to the hypothesis of bone functional adaptation, the architecture of trabecular bone adapts sensitively to physiological loadings. Previous studies have already shown a clear relation between trabecular architecture and locomotor behavior, mainly in mammals and birds. However, a link between trabecular architecture and lifestyle has rarely been examined. Here, we analyzed trabecular architecture of different clades of reptiles characterized by a wide range of lifestyles (aquatic, amphibious, generalist terrestrial, fossorial, and climbing). Humeri of squamates, turtles, and crocodylians have been scanned with microcomputed tomography. We selected spherical volumes of interest centered in the proximal metaphyses and measured trabecular spacing, thickness and number, degree of anisotropy, average branch length, bone volume fraction, bone surface density, and connectivity density. Only bone volume fraction showed a significant phylogenetic signal and its significant difference between squamates and other reptiles could be linked to their physiologies. We found negative allometric relationships for trabecular thickness and spacing, positive allometries for connectivity density and trabecular number and no dependence with size for degree of anisotropy and bone volume fraction. The different lifestyles are well separated in the morphological space using linear discriminant analyses, but a cross-validation procedure indicated a limited predictive ability of the model. The trabecular bone anisotropy has shown a gradient in turtles and in squamates: higher values in amphibious than terrestrial taxa. These allometric scalings, previously emphasized in mammals and birds, seem to be valid for all amniotes. Discriminant analysis has offered, to some extent, a distinction of lifestyles, which however remains difficult to strictly discriminate. Trabecular architecture seems to be a promising tool to infer lifestyle of extinct tetrapods, especially those involved in the terrestrialization.

Trabecular architecture of the great ape and human femoral head

Studies of femoral trabecular structure have shown that the orientation and volume of bone are associated with variation in loading and could be informative about individual joint positioning during locomotion. In this study, we analyse for the first time trabecular bone patterns throughout the femoral head using a whole-epiphysis approach to investigate how potential trabecular variation in humans and great apes relates to differences in locomotor modes. Trabecular architecture was analysed using microCT scans of Pan troglodytes (n = 20), Gorilla gorilla (n = 14), Pongo sp. (n = 5) and Homo sapiens (n = 12) in medtool 4.1. Our results revealed differences in bone volume fraction (BV/TV) distribution patterns, as well as overall trabecular parameters of the femoral head between great apes and humans. Pan and Gorilla showed two regions of high BV/TV in the femoral head, consistent with hip posture and loading during two discrete locomotor modes: knuckle-walking and climbing. Most Pongo specimens also displayed two regions of high BV/TV, but these regions were less discrete and there was more variability across the sample. In contrast, Homo showed only one main region of high BV/TV in the femoral head and had the lowest BV/TV, as well as the most anisotropic trabeculae. The Homo trabecular structure is consistent with stereotypical loading with a more extended hip compared with great apes, which is characteristic of modern human bipedalism. Our results suggest that holistic evaluations of femoral head trabecular architecture can reveal previously undetected patterns linked to locomotor behaviour in extant apes and can provide further insight into hip joint loading in fossil hominins and other primates.

First metatarsal trabecular bone structure in extant hominoids and Swartkrans hominins

Changes in first metatarsal (MT1) morphology within the hominin clade are crucial for reconstructing the evolution of a forefoot adapted for human-like gait. Studies of the external morphology of the MT1 in humans, non-human apes, and fossil hominins have documented changes in its robusticity, epiphyseal shape and its articulation with the medial cuneiform. Here, we test whether trabecular structure in the MT1 reflects different loading patterns in the forefoot across extant large apes and humans, and within this comparative context, infer locomotor behavior in two fossil hominins from Swartkrans, South Africa. Microtomographic scans were collected from the MT1 of Pongo sp. (n = 6), Gorilla gorilla (n = 10), Pan troglodytes (n = 10), Homo sapiens (n = 11), as well as SKX 5017 (Paranthropus robustus), and SK 1813 (Hominin gen. sp. indet.). Trabecular structure was quantified within the head and base using a 'whole-epiphysis' approach with medtool 4.2. We found that modern humans displayed relatively higher bone volume fraction (BV/TV) in the dorsal region of each epiphysis and a higher overall degree of anisotropy (DA), whereas great apes showed higher BV/TV in the plantar regions, reflecting dorsiflexion at the metatarsophalangeal (MTP) joint in the former and plantarflexion in the latter. Both fossils displayed low DA, with SKX 5017 showing a hyper-dorsal concentration of trabecular bone in the head (similar to humans), while SK 1813 showed a more central trabecular distribution not seen in either humans or non-human apes. Additionally, we found differences between non-human apes, modern humans, and the fossil taxa in trabecular spacing (Tb.Sp.), number (Tb.N.), and thickness (Tb.th.). While low DA in both fossils suggests increased mobility of the MT1, differences in their trabecular distributions could indicate variable locomotion in these Pleistocene hominins (recognizing that the juvenile status of SK 1813 is a potential confounding factor). In particular, evidence for consistent loading in hyper-dorsiflexion in SKX 5017 would suggest locomotor behaviors beyond human-like toe off during terrestrial locomotion.

Trabecular architecture and joint loading of the proximal humerus in extant hominoids, Ateles, and Australopithecus africanus

OBJECTIVES

Several studies have investigated potential functional signals in the trabecular structure of the primate proximal humerus but with varied success. Here, we apply for the first time a "whole-epiphyses" approach to analysing trabecular bone in the humeral head with the aim of providing a more holistic interpretation of trabecular variation in relation to habitual locomotor or manipulative behaviors in several extant primates and Australopithecus africanus.

MATERIALS AND METHODS

We use a "whole-epiphysis" methodology in comparison to the traditional volume of interest (VOI) approach to investigate variation in trabecular structure and joint loading in the proximal humerus of extant hominoids, Ateles and A. africanus (StW 328).

RESULTS

There are important differences in the quantification of trabecular parameters using a "whole-epiphysis" versus a VOI-based approach. Variation in trabecular structure across knuckle-walking African apes, suspensory taxa, and modern humans was generally consistent with predictions of load magnitude and inferred joint posture during habitual behaviors. Higher relative trabecular bone volume and more isotropic trabeculae in StW 328 suggest A. africanus may have still used its forelimbs for arboreal locomotion.

DISCUSSION

A whole-epiphysis approach to analysing trabecular structure of the proximal humerus can help distinguish functional signals of joint loading across extant primates and can provide novel insight into habitual behaviors of fossil hominins.

Trabecular bone patterning in the hominoid distal femur

BACKGROUND

In addition to external bone shape and cortical bone thickness and distribution, the distribution and orientation of internal trabecular bone across individuals and species has yielded important functional information on how bone adapts in response to load. In particular, trabecular bone analysis has played a key role in studies of human and nonhuman primate locomotion and has shown that species with different locomotor repertoires display distinct trabecular architecture in various regions of the skeleton. In this study, we analyse trabecular structure throughout the distal femur of extant hominoids and test for differences due to locomotor loading regime.

METHODS

Micro-computed tomography scans of Homo sapiens (n = 11), Pan troglodytes (n = 18), Gorilla gorilla (n = 14) and Pongo sp. (n = 7) were used to investigate trabecular structure throughout the distal epiphysis of the femur. We predicted that bone volume fraction (BV/TV) in the medial and lateral condyles in Homo would be distally concentrated and more anisotropic due to a habitual extended knee posture at the point of peak ground reaction force during bipedal locomotion, whereas great apes would show more posteriorly concentrated BV/TV and greater isotropy due to a flexed knee posture and more variable hindlimb use during locomotion.

RESULTS

Results indicate some significant differences between taxa, with the most prominent being higher BV/TV in the posterosuperior region of the condyles in Pan and higher BV/TV and anisotropy in the posteroinferior region in Homo. Furthermore, trabecular number, spacing and thickness differ significantly, mainly separating Gorilla from the other apes.

DISCUSSION

The trabecular architecture of the distal femur holds a functional signal linked to habitual behaviour; however, there was more similarity across taxa and greater intraspecific variability than expected. Specifically, there was a large degree of overlap in trabecular structure across the sample, and Homo was not as distinct as predicted. Nonetheless, this study offers a comparative sample of trabecular structure in the hominoid distal femur and can contribute to future studies of locomotion in extinct taxa.

Systemic patterns of trabecular bone across the human and chimpanzee skeleton

Aspects of trabecular bone architecture are thought to reflect regional loading of the skeleton, and thus differ between primate taxa with different locomotor and postural modes. However, there are several systemic factors that affect bone structure that could contribute to, or be the primary factor determining, interspecific differences in bone structure. These systemic factors include differences in genetic regulation, sensitivity to loading, hormone levels, diet, and activity levels. Improved understanding of inter-/intraspecific variability, and variability across the skeleton of an individual, is required to interpret properly potential functional signals present within trabecular structure. Using a whole-region method of analysis, we investigated trabecular structure throughout the skeleton of humans and chimpanzees. Trabecular bone volume fraction (BV/TV), degree of anisotropy (DA) and trabecular thickness (Tb.Th) were quantified from high resolution micro-computed tomographic scans of the humeral and femoral head, third metacarpal and third metatarsal head, distal tibia, talus and first thoracic vertebra. We found that BV/TV is, in most anatomical sites, significantly higher in chimpanzees than in humans, suggesting a systemic difference in trabecular structure unrelated to local loading regime. Differences in BV/TV between the forelimb and hindlimb did not clearly reflect differences in locomotor loading in the study taxa. There were no clear systemic differences between the taxa in DA and, as such, this parameter might reflect function and relate to differences in joint loading. This systemic approach reveals both the pattern of variability across the skeleton and between taxa, and helps identify those features of trabecular structure that may relate to joint function.

A novel use of 3D printing model demonstrates the effects of deteriorated trabecular bone structure on bone stiffness and strength

Trabecular bone structure is crucial to normal mechanical behavior of bones. Studies have shown that osteoporosis negatively affects trabecular bone structure, mainly by reducing bone volume fraction (BV/TV) and thus increasing fracture risk. One major limitation in assessing and quantifying the effect of this structural deterioration is that no two trabecular structures are identical. Thus, when we compare a group of healthy bones against a different group of bones that experienced resorption (i.e. decreased BV/TV) we only discover an "average" mechanical effect. It is impossible to quantify the mechanical effect of individual structural deterioration for each sample, simply because we never have the same sample in both states (intact and deteriorated structure). 3D printing is a new technology that can assist in overcoming this issue. Here we report a preliminary study that compares a healthy 3D printed trabecular bone model with the same model after bone resorption was simulated. Since the deteriorated structural bone model is derived from the healthy one, it is possible to directly estimate (percentage wise) the decrease of tissue stiffness and strength as a result of bone resorption for this specific structure. Our results demonstrate that a relatively small decrease in BV/TV (about 8%) leads to a dramatic decrease in structural strength (24%) and structural stiffness (17%), (P < 0.01). Structural strength decreased from an average of 9.14 ± 2.85MPa to 6.97 ± 2.44MPa, while structural stiffness decreased from an average of 282.5 ± 63.4N/mm to 233.8 ± 51.2N/mm. This study demonstrates that 3D printing is a novel and valuable tool for quantifying the effect of structural deterioration on the mechanical properties of trabecular bone. In the future, this approach may help us attain better personal fracture risk assessments by CT scanning, 3D printing and mechanically testing individual bone replicas from patients suffering excessive bone resorption.

Asymmetry in the Cortical and Trabecular Bone of the Human Humerus During Development

Many studies have noted that the bones of the human upper limb display bilateral asymmetry, commonly linking this asymmetry in external and internal morphology to handedness and lateralization. Few studies, however, have attempted to track asymmetry throughout ontogeny. This study assesses the ontogenetic development of cortical and trabecular bone asymmetry in the humerus. We predict that directional asymmetry in structural properties will emerge in concert with hand preference and increased activity levels during the juvenile period. Paired humeri from 57 individuals from the Norris Farms #36 archaeological skeletal collection ranging in age from neonate to adult were used in the current study. Cortical bone cross-sectional properties and three-dimensional trabecular bone structure were quantified from microcomputed tomography data. The results indicate significant absolute asymmetry in all measured cortical and trabecular bone variables across all ages. Trabecular bone displays significantly higher absolute asymmetry than cortical bone. Contrary to expectations, however, this study found very little evidence for significant directional asymmetry in humeral length and cortical or trabecular bone variables, except in adults. The presence of significant absolute asymmetry in all age groups, and the lack of significant directional asymmetry in almost all variables at all ages, suggests that structural differences due to higher levels of habitual loading in the dominant arm are overlain on a template of potentially significant existing asymmetry. Anat Rec, 301:1012-1025, 2018. © 2017 Wiley Periodicals, Inc.

Trabecular architecture in the forelimb epiphyses of extant xenarthrans (Mammalia)

Background

Bone structure has a crucial role in the functional adaptations that allow vertebrates to conduct their diverse lifestyles. Much has been documented regarding the diaphyseal structure of long bones of tetrapods. However, the architecture of trabecular bone, which is for instance found within the epiphyses of long bones, and which has been shown experimentally to be extremely plastic, has received little attention in the context of lifestyle adaptations (virtually only in primates). We therefore investigated the forelimb epiphyses of extant xenarthrans, the placental mammals including the sloths, anteaters, and armadillos. They are characterised by several lifestyles and degrees of fossoriality involving distinct uses of their forelimb. We used micro computed tomography data to acquire 3D trabecular parameters at regions of interest (ROIs) for all extant genera of xenarthrans (with replicates). Traditional, spherical, and phylogenetically informed statistics (including the consideration of size effects) were used to characterise the functional signal of these parameters.

Results

Several trabecular parameters yielded functional distinctions. The main direction of the trabeculae distinguished lifestyle categories for one ROI (the radial trochlea). Among the other trabecular parameters, it is the degree of anisotropy (i.e., a preferential alignment of the trabeculae) that yielded the clearest functional signal. For all ROIs, the armadillos, which represent the fully terrestrial and fossorial category, were found as characterised by a greater degree of anisotropy (i.e., more aligned trabeculae). Furthermore, the trabeculae of the humeral head of the most fossorial armadillos were also found to be more anisotropic than in the less fossorial species.

Conclusions

Most parameters were marked by an important intraspecific variability and by a size effect, which could, at least partly, be masking the functional signal. But for some parameters, the degree of anisotropy in particular, a clear functional distinction was recovered. Along with data on primates, our findings suggest that a trabecular architecture characterised by a greater degree of anisotropy is to be expected in species in which the relevant epiphyses withstand a restricted range of load directions. Trabecular architecture therefore is a promising research avenue for the reconstruction of lifestyles in extinct or cryptic species.

Electronic supplementary material

The online version of this article (10.1186/s12983-017-0241-x) contains supplementary material, which is available to authorized users.

Trabecular mapping: Leveraging geometric morphometrics for analyses of trabecular structure

OBJECTIVES

Trabecular microstructure of limb bone epiphyses has been used to elucidate the relationship between skeletal form and behavior among mammals. Such studies have often relied on the analysis of a single volume of interest (VOI). Here we present a method for evaluating variation in bone microstructure across articular surfaces by leveraging sliding semilandmarks.

METHODS

Two samples were used to demonstrate the proposed methodology and test the hypothesis that microstructural variables are homogeneously distributed: tali from two ape genera (Pan and Pongo, n = 9) and modern human distal femora (n = 10). Sliding semilandmarks were distributed across articular surfaces and used to locate the position of multiple VOIs immediately deep to the cortical shell. Trabecular bone properties were quantified using the BoneJ plugin for ImageJ. Nonparametric MANOVA tests were used to make group comparisons and differences were explored using principal components analysis and visualized using color maps.

RESULTS

Tests reveal that trabecular parameters are not distributed homogeneously and identify differences between chimpanzee and orangutan tali with regards to trabecular spacing and degree of anisotropy, with chimpanzee tali being more anisotropic and having more uniformly spaced trabeculae. Human males and females differed in the pattern of trabecular spacing with males having more uniform trabecular spacing across the joint surface.

CONCLUSIONS

The proposed procedure quantifies variation in trabecular bone parameters across joint surfaces and allows for meaningful statistical comparisons between groups of interest. Consequently it holds promise to help elucidate links between trabecular bone structure and animal behavior.

Low trabecular bone density in recent sedentary modern humans

OBJECTIVES

Research on a limited number of samples suggests that trabecular bone density (i.e., bone volume fraction, BVF) within specific articulations is lower among more sedentary Holocene agricultural populations compared with Holocene foragers, implying that activity levels have a significant effect on trabecular BVF. However, it is unclear to what extent BVF differs among groups with varying activity levels and how general this phenomenon is across multiple limb articulations. Here, we test two hypotheses that: (i) sedentary populations have lower BVF compared with active populations across limb articulations; and (ii) these declines are more uniform in the lower limb (because of its more direct relationship to mobility), and more variable in the upper limb.

MATERIALS AND METHODS

We estimated BVF in seven lower and upper limb articulations of five Holocene population samples with subsistence strategies spanning from foraging through horticultural to industrial using pQCT (peripheral Quantitative Computed Tomography).

RESULTS

Both hypotheses are largely supported. First, the most active groups have significantly greater BVF in most limb elements compared with more sedentary groups. Second, all sedentary groups have relatively similar (and lower) BVF in the lower limb but show more variation in upper limb articulations.

CONCLUSIONS

These results suggest that a decline in activity levels associated with the adoption of agriculture and industrialization significantly contributed to the reduction in BVF in recent modern humans, but specific behavioral changes, particularly in the upper limb, also affected these patterns.

The effects of cracks on the quantification of the cancellous bone fabric tensor in fossil and archaeological specimens: a simulation study

Cancellous bone is very sensitive to its prevailing mechanical environment, and study of its architecture has previously aided interpretations of locomotor biomechanics in extinct animals or archaeological populations. However, quantification of architectural features may be compromised by poor preservation in fossil and archaeological specimens, such as post mortem cracking or fracturing. In this study, the effects of post mortem cracks on the quantification of cancellous bone fabric were investigated through the simulation of cracks in otherwise undamaged modern bone samples. The effect on both scalar (degree of fabric anisotropy, fabric elongation index) and vector (principal fabric directions) variables was assessed through comparing the results of architectural analyses of cracked vs. non-cracked samples. Error was found to decrease as the relative size of the crack decreased, and as the orientation of the crack approached the orientation of the primary fabric direction. However, even in the best-case scenario simulated, error remained substantial, with at least 18% of simulations showing a > 10% error when scalar variables were considered, and at least 6.7% of simulations showing a > 10° error when vector variables were considered. As a 10% (scalar) or 10° (vector) difference is probably too large for reliable interpretation of a fossil or archaeological specimen, these results suggest that cracks should be avoided if possible when analysing cancellous bone architecture in such specimens.

Trabecular architecture in the thumb of Pan and Homo: implications for investigating hand use, loading, and hand preference in the fossil record

OBJECTIVES

Humans display an 85-95% cross-cultural right-hand bias in skilled tasks, which is considered a derived behavior because such a high frequency is not reported in wild non-human primates. Handedness is generally considered to be an evolutionary byproduct of selection for manual dexterity and augmented visuo-cognitive capabilities within the context of complex stone tool manufacture/use. Testing this hypothesis requires an understanding of when appreciable levels of right dominant behavior entered the fossil record. Because bone remodels in vivo, skeletal asymmetries are thought to reflect greater mechanical loading on the dominant side, but incomplete preservation of external morphology and ambiguities about past loading environments complicate interpretations. We test if internal trabecular bone is capable of providing additional information by analyzing the thumb of Homo sapiens and Pan.

MATERIALS AND METHODS

We assess trabecular structure at the distal head and proximal base of paired (left/right) first metacarpals using micro-CT scans of Homo sapiens (n = 14) and Pan (n = 9). Throughout each epiphysis we quantify average and local bone volume fraction (BV/TV), degree of anisotropy (DA), and elastic modulus (E) to address bone volume patterning and directional asymmetry.

RESULTS

We find a right directional asymmetry in H. sapiens consistent with population-level handedness, but also report a left directional asymmetry in Pan that may be the result of postural and/or locomotor loading.

CONCLUSION

We conclude that trabecular bone is capable of detecting right/left directional asymmetry, but suggest coupling studies of internal structure with analyses of other skeletal elements and cortical bone prior to applications in the fossil record.

A review of trabecular bone functional adaptation: what have we learned from trabecular analyses in extant hominoids and what can we apply to fossils?

Many of the unresolved debates in palaeoanthropology regarding evolution of particular locomotor or manipulative behaviours are founded in differing opinions about the functional significance of the preserved external fossil morphology. However, the plasticity of internal bone morphology, and particularly trabecular bone, allowing it to respond to mechanical loading during life means that it can reveal greater insight into how a bone or joint was used during an individual's lifetime. Analyses of trabecular bone have been commonplace for several decades in a human clinical context. In contrast, the study of trabecular bone as a method for reconstructing joint position, joint loading and ultimately behaviour in extant and fossil non-human primates is comparatively new. Since the initial 2D studies in the late 1970s and 3D analyses in the 1990 s, the utility of trabecular bone to reconstruct behaviour in primates has grown to incorporate experimental studies, expanded taxonomic samples and skeletal elements, and improved methodologies. However, this work, in conjunction with research on humans and non-primate mammals, has also revealed the substantial complexity inherent in making functional inferences from variation in trabecular architecture. This review addresses the current understanding of trabecular bone functional adaptation, how it has been applied to hominoids, as well as other primates and, ultimately, how this can be used to better interpret fossil hominoid and hominin morphology. Because the fossil record constrains us to interpreting function largely from bony morphology alone, and typically from isolated bones, analyses of trabecular structure, ideally in conjunction with that of cortical structure and external morphology, can offer the best resource for reconstructing behaviour in the past.