Analysis of the effect of osteon diameter on the potential relationship of osteocyte lacuna density and osteon wall thickness

Microstructural changes in the irradiated and osteoradionecrotic bone: a SEM study

Radiation exposure is a major health concern due to bone involvement including mandible, causing deleterious effects on bone metabolism, and healing with an increasing risk of infection and osteoradionecrosis. This study aims to investigate the radiotherapy-induced microstructural changes in the human mandible by scanning electron microscopy (SEM). Mandibular cortical bone biopsies were obtained from control, irradiated, and patients with osteoradionecrosis (ORN). Bone samples were prepared for light microscopy and SEM. The SEM images were analyzed for the number of osteons, number of Haversian canal (HC), diameter of osteon (D.O), the diameter of HC (D.HC), osteonal wall thickness (O.W.Th), number of osteocytes, and number of osteocytic dendrites. The number of osteons, D.O, D.HC, O.W.Th, the number of osteocytes, and osteocytic dendrites were significantly decreased in both irradiated and ORN compared to controls (p < .05). The number of HCs decreased in irradiated and ORN bone compared to the control group. However, this was statistically not significant. The deleterious effect of radiation continues gradually altering the bone quality, structure, cellularity, and vascularity in the long term (>5 years mean radiation biopsy interval). The underlying microscopic damage in bone increases its susceptibility and contributes further to radiation-induced bone changes or even ORN.

How osteons form: A quantitative hypothesis-testing analysis of cortical pore filling and wall asymmetry

Osteon morphology provides valuable information about the interplay between different processes involved in bone remodelling. The correct quantitative interpretation of these morphological features is challenging due to the complexity of interactions between osteoblast behaviour, and the evolving geometry of cortical pores during pore closing. We present a combined experimental and mathematical modelling study to provide insights into bone formation mechanisms during cortical bone remodelling based on histological cross-sections of quiescent human osteons and hypothesis-testing analyses. We introduce wall thickness asymmetry as a measure of the local asymmetry of bone formation within an osteon and examine the frequency distribution of wall thickness asymmetry in cortical osteons from human iliac crest bone samples from women 16-78 years old. Our measurements show that most osteons possess some degree of asymmetry, and that the average degree of osteon asymmetry in cortical bone evolves with age. We then propose a comprehensive mathematical model of cortical pore filling that includes osteoblast secretory activity, osteoblast elimination, osteoblast embedment as osteocytes, and osteoblast crowding and redistribution along the bone surface. The mathematical model is first calibrated to symmetric osteon data, and then used to test three mechanisms of asymmetric wall formation against osteon data: (i) delays in the onset of infilling around the cement line; (ii) heterogeneous osteoblastogenesis around the bone perimeter; and (iii) heterogeneous osteoblast secretory rate around the bone perimeter. Our results suggest that wall thickness asymmetry due to off-centred Haversian pores within osteons, and that nonuniform lamellar thicknesses within osteons are important morphological features that can indicate the prevalence of specific asymmetry-generating mechanisms. This has significant implications for the study of disruptions of bone formation as it could indicate what biological bone formation processes may become disrupted with age or disease.

The effect of caponization on tibia bone histomorphometric properties of crossbred roosters

The negative effect of caponization on the structural, geometric and mechanical parameters of femur and tibia has been shown in a few studies. Nevertheless, its influence on tibia bone microarchitecture is still largely unknown. Therefore, this study aimed to assess the effect of castration on the microstructural parameters of the trabecular and compact bone of tibia bone in crossbred chickens. The experiment involved 96 roosters derived from crossing Yellowleg Partridge hens ([Formula: see text]-33) and Rhode Island Red cockerels (R-11) fattened until the 16th, 20th and 24th week of life. Animals were randomly divided into 2 groups of 48 each. Group I (control) consisted of intact roosters and group II (experimental) consisted of birds subjected to caponization at the 8th week of age. The castration surgery had no influence on some properties within compact bone such as osteon diameter On.Dm, osteon perimeter On.Pm, osteon area On.Ar, osteocyte lacunar number Ot.Lc.N, osteon bone area On.B.Ar, osteon wall thickness On.W.Th as well as thick-mature collagen content in all analyzed age groups of animals. Nevertheless, our results demonstrate that castration caused a decrease of Haversian canal area Hc.Ar, osteocyte lacunar area Ot.Lc.Ar and osteocyte lacunar porosity Ot.Lc.Po among the 16-week-old birds, decrease of Haversian canal perimeter Hc.Pm and increase of fraction of bone area On.B.Ar/On.Ar among 16- and 24-week-old individuals and also an increase of osteocyte lacunar density Ot.Lc.Dn in the osteons of the oldest roosters. Additionally, some microstructural parameters of trabecular bone show the negative effect of caponization. The youngest 16-week-old capons were characterized by thinnin the trabecular in the epiphysis part of tibia. Moreover, in the case of 24-week-old, there is an increase in the trabecular separation Tb.Sp with simultaneous decrease of trabecular number Tb.N compared to roosters, which may suggest the increase of the bone resorption among the oldest individuals. The increased bone turnover in the epiphysis part of the tibia bone also indicates changes in the collagen fibers distribution, where among 20-week-old animals there is a decrease in the content of immature thin collagen fibers with simultaneous increase in the content of mature thick collagen fibers. Furthermore, among the oldest 24-week-old individuals we can observe the increased thick-to-thin collagen ratio, which may be a sign of slowing down in bone formation.

Exploration of the synergistic role of cortical thickness asymmetry ("Trabecular Eccentricity" concept) in reducing fracture risk in the human femoral neck and a control bone (Artiodactyl Calcaneus)

The mechanobiology of the human femoral neck is a focus of research for many reasons including studies that aim to curb age-related bone loss that contributes to a near-exponential rate of hip fractures. Many believe that the femoral neck is often loaded in rather simple bending, which causes net tension stress in the upper (superior) femoral neck and net compression stress in its inferior aspect ("T/C paradigm"). This T/C loading regime lacks in vivo proof. The "C/C paradigm" is a plausible alternative simplified load history that is characterized by a gradient of net compression across the entire femoral neck; action of the gluteus medius and external rotators of the hip are important in this context. It is unclear which paradigm is at play in natural loading due to lack of in vivo bone strain data and deficiencies in understanding mechanisms and manifestations of bone adaptation in tension vs. compression. For these reasons, studies of the femoral neck would benefit from being compared to a 'control bone' that has been proven, by strain data, to be habitually loaded in bending. The artiodactyl (sheep and deer) calcaneus model has been shown to be a very suitable control in this context. However, the application of this control in understanding the load history of the femoral neck has only been attempted in two prior studies, which did not examine the interplay between cortical and trabecular bone, or potential load-sharing influences of tendons and ligaments. Our first goal is to compare fracture risk factors of the femoral neck in both paradigms. Our second goal is to compare and contrast the deer calcaneus to the human femoral neck in terms of fracture risk factors in the T/C paradigm (the C/C paradigm is not applicable in the artiodactyl calcaneus due to its highly constrained loading). Our third goal explores interplay between dorsal/compression and plantar/tension regions of the deer calcaneus and the load-sharing roles of a nearby ligament and tendon, with insights for translation to the femoral neck. These goals were achieved by employing the analytical model of Fox and Keaveny (J. Theoretical Biology 2001, 2003) that estimates fracture risk factors of the femoral neck. This model focuses on biomechanical advantages of the asymmetric distribution of cortical bone in the direction of habitual loading. The cortical thickness asymmetry of the femoral neck (thin superior cortex, thick inferior cortex) reflects the superior-inferior placement of trabecular bone (i.e., "trabecular eccentricity," TE). TE helps the femoral neck adapt to typical stresses and strains through load-sharing between superior and inferior cortices. Our goals were evaluated in the context of TE. Results showed the C/C paradigm has lower risk factors for the superior cortex and for the overall femoral neck, which is clinically relevant. TE analyses of the deer calcaneus revealed important synergism in load-sharing between the plantar/tension cortex and adjacent ligament/tendon, which challenges conventional understanding of how this control bone achieves functional adaptation. Comparisons with the control bone also exposed important deficiencies in current understanding of human femoral neck loading and its potential histocompositional adaptations.

The Influence of Osteon Orientation on Surface Topography Parameters after Machining of Cortical Bone Tissue

Mechanical processing of cortical bone tissue is one of the most common surgical procedures. A critical issue accompanying this processing is the condition of the surface layer, which can stimulate tissue growth and serve as a drug carrier. A comparison of the surface condition before and after orthogonal and abrasive processing was conducted to validate the influence of bone tissue's processing mechanism and orthotropic properties on the surface topography. A cutting tool with a defined geometry and a custom-made abrasive tool was used. The bone samples were cut in three directions, depending on the orientation of the osteons. The cutting forces, acoustic emission, and surface topography were measured. The level of isotropy and the topography of the grooves showed statistical differences relative to the anisotropy directions. After orthogonal processing, the surface topography parameter Ra was determined from 1.38 ± 0.17 μm to 2.82 ± 0.32. In the case of abrasive processing, no correlation was found between the orientation of osteons and topographical properties. The average groove density for abrasive machining was below 1004 ± 0.7, and for orthogonal, it was above 1156 ± 58. Due to the positive properties of the developed bone surface, it is advisable to cut in the transverse direction and parallel to the axis of the osteons.

Osteocyte lacunae in transiliac bone biopsy samples across life span

Osteocytes act as bone mechanosensors, regulators of osteoblast/osteoclast activity and mineral homeostasis, however, knowledge about their functional/morphological changes throughout life is limited. We used quantitative backscattered electron imaging (qBEI) to investigate osteocyte lacunae sections (OLS) as a 2D-surrogate characterizing the osteocytes. OLS characteristics, the density of mineralized osteocyte lacunae (i.e., micropetrotic osteocytes, md.OLS-Density in nb/mm²) and the average degree of mineralization (Ca_Mean in weight% calcium) of cortex and spongiosa were analyzed in transiliac biopsy samples from healthy individuals under 30 (n=59) and over 30 years (n=50) (i.e., before and after the age of peak bone mass, respectively). We found several differences in OLS-characteristics: 1). Inter-individually between the age groups: OLS-Density and OLS-Porosity were reduced by about 20% in older individuals in spongiosa and in cortex versus younger probands (both, p < 0.001). 2). Intra-individually between bone compartments: OLS-Density was higher in the cortex, +18.4%, p < 0.001 for younger and +7.6%, p < 0.05 for older individuals. Strikingly, the most frequent OLS nearest-neighbor distance was about 30 µm in both age groups and at both bone sites revealing a preferential organization of osteocytes in clusters. OLS-Density was negatively correlated with Ca_Mean in both spongiosa and cortex (both, p < 0.001). Few mineralized OLS were found in young individuals along with an increase of md.OLS-Density with age. In summary, this transiliac bone sample analysis of 200000 OLS from 109 healthy individuals throughout lifespan reveals several age-related differences in OLS characteristics. Moreover, our study provides reference data from healthy individuals for different ages to be used for diagnosis of bone abnormalities in diseases. STATEMENT OF SIGNIFICANCE: Osteocytes are bone cells embedded in lacunae within the mineralized bone matrix and have a key role in the bone metabolism and the mineral homeostasis. Not easily accessible, we used quantitative backscattered electron imaging to determine precisely number and shape descriptors of the osteocyte lacunae in 2D. We analyzed transiliac biopsy samples from 109 individuals with age distributed from 2 to 95 years. Compact cortical bone showed constantly higher lacunar density than cancellous bone but the lacunar density in both bone tissue decreased with age before the peak bone mass age at 30 years and stabilized or even increased after this age. This extensive study provides osteocyte lacunae reference data from healthy individuals usable for bone pathology diagnosis.

Bone Abrasive Machining: Influence of Tool Geometry and Cortical Bone Anisotropic Structure on Crack Propagation

The abrasive machining of cortical tissue is used in many arthroplasties and craniofacial surgery procedures. However, this method requires further research due to the processes’ complexity and the tissue’s composite structure. Therefore, studies were carried out to assess the impact of grid geometry and the anisotropic structure of bone tissue on the cutting process and crack propagation. The analysis was performed based on an orthogonal cutting in three directions. The grain shape has been simplified, and the cutting forces, crack path and surface quality were monitored. The results indicate that a depth of cut at 100−25 µm allows the most accurate cutting control. A transverse cutting direction results in the greatest surface irregularity: Iz = 17.7%, Vvc = 3.29 mL/m2 and df = 5.22 µm and generates the most uncontrolled cracks. Maximum fracture force values of FF > 80 N were generated for d = 175 µm. For d < 5 µm, no cracks or only slight penetration occurs. A positive γ provides greater repeatability and crack control. Negative γ generates penetrating cracks and uncontrolled material damage. The individual types of cracks have a characteristic course of changes in Fx. The clearance angle did not affect the crack propagation.

Influence of Machining Parameters on Cutting and Chip-Formation Process during Cortical Bone Orthogonal Machining

Cortical bone machining is commonly used in craniofacial surgery. The shaping of bone surfaces requires a precise determination of the process’s complexity due to the cutting tool’s defined or undefined geometry. Therefore, research was carried out to assess the impact of the rake angle (γ), clearance angle and depth of cut (d) on the cortical bone machining process. Analysis was carried out based on the orthogonal cutting in three directions. The cutting tool shape was simplified, and the cutting forces and the chip-formation process were monitored. The highest values of the resultant cutting force and shear force were recorded for γ < 0. The specific cutting force decreases with the increase of d. Cutting in the transverse direction is characterized by the highest values of resultant cutting force and shear force. The coefficient of friction depends primarily on the d and takes a constant value or increases with the increase of γ. The tests showed that the chips are formed in the entire range of d ≥ 0.5 µm and create regular shapes for d ≥ 10 µm. The research novelty confirms that even negative cutting angles guarantee controlled cutting and can find wider application in surgical procedures.

Osteodentin in the Atlantic wolffish (Anarhichas lupus): Dentin or bone?

The teeth of actinopterygian fish, like those of mammals, consist of a thin outer hyper-mineralized layer (enamel or enameloid) that surrounds a core of dentin. While all mammalian species have a single type of dentin (called orthodentin), various dentin types have been reported in the teeth of actinopterygian fish. The most common type of actinopterygian fish dentin is orthodentin. However, the second most common type of actinopterygian fish dentin, called osteodentin, found in several teleost species and in many Selachians, is structurally radically different from orthodentin. Osteodentin, comprising denteons and inter-denteonal matrix, is characterized by an appearance that is similar to mammalian osteonal bone, however, it lacks cells and a lacuno-canalicular system. The current consensus is that although osteodentin is morphologically different from orthodentin, it is a true dentinal material, the product of odontoblast cells. We present the results of a study of osteodentin found in the teeth of the Atlantic wolffish, Anarhichas lupus. Using a variety of microscopy techniques, high-resolution microCT scans, and micro-indentation we describe the three-dimensional structure of both its components (denteons and inter-denteonal matrix), as well as their mineral density distribution and mechanical properties, at several length-scales. We show that wolffish osteodentin is remarkably similar to the anosteocytic bone of the swords of several swordfish species. We also describe the three-dimensional network of canals found in mature osteodentin. The high density of these canals in a metabolically inactive, acellular tissue casts doubt upon the accepted paradigm, that the canals house a vascular network.

Detection and imaging of gadolinium accumulation in human bone tissue by micro- and submicro-XRF

Gadolinium-based contrast agents (GBCAs) are frequently used in patients undergoing magnetic resonance imaging. In GBCAs gadolinium (Gd) is present in a bound chelated form. Gadolinium is a rare-earth element, which is normally not present in human body. Though the blood elimination half-life of contrast agents is about 90 minutes, recent studies demonstrated that some tissues retain gadolinium, which might further pose a health threat due to toxic effects of free gadolinium. It is known that the bone tissue can serve as a gadolinium depot, but so far only bulk measurements were performed. Here we present a summary of experiments in which for the first time we mapped gadolinium in bone biopsy from a male patient with idiopathic osteoporosis (without indication of renal impairment), who received MRI 8 months prior to biopsy. In our studies performed by means of synchrotron radiation induced micro- and submicro-X-ray fluorescence spectroscopy (SR-XRF), gadolinium was detected in human cortical bone tissue. The distribution of gadolinium displays a specific accumulation pattern. Correlation of elemental maps obtained at ANKA synchrotron with qBEI images (quantitative backscattered electron imaging) allowed assignment of Gd structures to the histological bone structures. Follow-up beamtimes at ESRF and Diamond Light Source using submicro-SR-XRF allowed resolving thin Gd structures in cortical bone, as well as correlating them with calcium and zinc.

Effects of Nutritional Deficiency of Boron on the Bones of the Appendicular Skeleton of Mice

Scientific evidence has shown the nutritional importance of boron (B) in the remodeling and repair of cancellous bone tissue. However, the effects of the nutritional deficiency of B on the cortical bone tissue of the appendicular skeleton have not yet been described. Thus, a study was performed to histomorphometrically evaluate the density of osteocyte lacunae of cortical bone of mouse femora under conditions of nutritional deficiency of B and to analyze the effects of the deficiency on the biomechanical properties of mouse tibiae. Weaning, 21-day-old male Swiss mice were assigned to the following two groups: controls (B+; n = 10) and experimental (B-; n = 10). Control mice were fed a basal diet containing 3 mg B/kg, whereas experimental mice were fed a B-deficient diet containing 0.07 mg B/kg for 9 weeks. The histological and histomorphometric evaluations of the mice fed a B-deficient diet showed a decrease in the density of osteocyte lacunae in the femoral cortical bone tissue and the evaluation of biomechanical properties showed lower bone rigidity in the tibia.

FABRICA: A Bioreactor Platform for Printing, Perfusing, Observing, & Stimulating 3D Tissues

We are introducing the FABRICA, a bioprinter-agnostic 3D-printed bioreactor platform designed for 3D-bioprinted tissue construct culture, perfusion, observation, and analysis. The computer-designed FABRICA was 3D-printed with biocompatible material and used for two studies: (1) Flow Profile Study: perfused 5 different media through a synthetic 3D-bioprinted construct and ultrasonically analyzed the flow profile at increasing volumetric flow rates (VFR); (2) Construct Perfusion Study: perfused a 3D-bioprinted tissue construct for a week and compared histologically with a non-perfused control. For the flow profile study, construct VFR increased with increasing pump VFR. Water and other media increased VFR significantly while human and pig blood showed shallow increases. For the construct perfusion study, we confirmed more viable cells in perfused 3D-bioprinted tissue compared to control. The FABRICA can be used to visualize constructs during 3D-bioprinting, incubation, and to control and ultrasonically analyze perfusion, aseptically in real-time, making the FABRICA tunable for different tissues.

Secondary osteons scale allometrically in mammalian humerus and femur

Intra-cortical bone remodelling is a cell-driven process that replaces existing bone tissue with new bone tissue in the bone cortex, leaving behind histological features called secondary osteons. While the scaling of bone dimensions on a macroscopic scale is well known, less is known about how the spatial dimensions of secondary osteons vary in relation to the adult body size of the species. We measured the cross-sectional area of individual intact secondary osteons and their central Haversian canals in transverse sections from 40 stylopodal bones of 39 mammalian species (body mass 0.3-21 000 kg). Scaling analysis of our data shows that mean osteonal resorption area (negative allometry, exponent 0.23,R² 0.54,p<0.005) and Haversian canal area (negative allometry, exponent 0.31,R² 0.45,p<0.005) are significantly related to body mass, independent of phylogeny. This study is the most comprehensive of its kind to date, and allows us to describe overall trends in the scaling behaviour of secondary osteon dimensions, supporting the inference that the osteonal resorption area may be limited by the need to avoid fracture in smaller mammalian species, but the need to maintain osteocyte viability in larger mammalian species.

Current bone substitutes for implant dentistry

PURPOSE

Alveolar ridge augmentation is essential for success in implant therapy and depends on the biological performance of bone graft materials. This literature review aims to comprehensively explain the clinically relevant capabilities and limitations of currently available bone substitutes for bone augmentation in light of biomaterial science.

STUDY SELECTION

The biological performance of calcium phosphate-based bone substitutes was categorized according to space-making capability, biocompatibility, bioabsorption, and volume maintenance over time. Each category was reviewed based on clinical studies, preclinical animal studies, and in vitro studies.

RESULTS

Currently available bone substitutes provide only osteoconduction as a scaffold but not osteoinduction. Particle size, sensitivity to enzymatic or chemical dissolution, and mechanical properties affect the space-making capability of bone substitutes. The nature of collagen fibers, particulate size, and release of calcium ions influence the biocompatibility of bone substitutes. Bioabsorption of bone substitutes is determined by water solubility (chemical composition) and acid resistance (integrity of apatite structure). Bioabsorption of remnant bone substitute material and volume maintenance of the augmented bone are inversely related.

CONCLUSION

It is necessary to improve the biocompatibility of currently available bone substitutes and to strike an appropriate balance between bioabsorption and volume maintenance to achieve ideal bone remodeling.

American Society of Biomechanics Journal of Biomechanics Award 2013: cortical bone tissue mechanical quality and biological mechanisms possibly underlying atypical fractures

The biomechanics literature contains many well-understood mechanisms behind typical fracture types that have important roles in treatment planning. The recent association of “atypical” fractures with long-term use of drugs designed to prevent osteoporosis has renewed interest in the effects of agents on bone tissue-level quality. While this class of fracture was recognized prior to the introduction of the anti-resorptive bisphosphonate drugs and recently likened to stress fractures, the mechanism(s) that lead to atypical fractures have not been definitively identified. Thus, a causal relationship between these drugs and atypical fracture has not been established. Physicians, bioengineers and others interested in the biomechanics of bone are working to improve fracture-prevention diagnostics, and the design of treatments to avoid this serious side-effect in the future. This review examines the mechanisms behind the bone tissue damage that may produce the atypical fracture pattern observed increasingly with long-term bisphosphonate use. Our recent findings and those of others reviewed support that the mechanisms behind normal, healthy excavation and tunnel filling by bone remodeling units within cortical tissue strengthen mechanical integrity. The ability of cortical bone to resist the damage induced during cyclic loading may be altered by the reduced remodeling and increased tissue age resulting from long-term bisphosphonate treatment. Development of assessments for such potential fractures would restore confidence in pharmaceutical treatments that have the potential to spare millions in our aging population from the morbidity and death that often follow bone fracture.

Normal variation in cortical osteocyte lacunar parameters in healthy young males

The most abundant cell in bone, osteocytes form an interconnected system upon which the regulation of healthy bone relies. Although the complete nature of the role of osteocytes has yet to be defined, they are generally accepted to play a part in the sensing of load and the initiation of damage repair. A previous study conducted by our group identified variation of up to 30% in osteocyte lacunar density and morphological parameters between regions of a single cross-section of human femoral shaft; that study, however, was limited to a single individual. The aim of the current study was to determine whether this pattern consistently occurs in healthy young male femora. Anterior, posterior, medial and lateral blocks were prepared from the proximal femoral shaft of seven males and synchrotron radiation micro-CT imaged. Average lacunar densities (± SD) from the anterior, posterior, medial and lateral regions were 23 394 ± 1705, 30 180 ± 4860, 35 946 ± 5990 and 29 678 ± 6081 lacunae per mm(3) of bone tissue, respectively. These values were significantly different between the anterior and both the medial and posterior regions (P < 0.05). The density of the combined anterior and posterior regions was also significantly lower (P = 0.006) than the density of the combined medial and lateral regions. Although no difference was found in predominant orientation, shape differences were found; with the combined anterior-posterior regions having lacunae that were significantly more elongated and less flat than the combined medial-lateral values (P < 0.001). As expected, in this larger study, there was a dramatic difference in lacunar density between the medial and anterior region (up to ~ 54%). The study clearly demonstrates that the high variation seen in osteocyte lacunar density as well as other lacunar parameters, noted in a number of biomechanical, age and pathology studies, are well within the range of normal variation; however, the reasons for and consequences of this variation remain unclear. Lacunar parameters including abundance and shape are being increasingly incorporated into computational modeling of bone biology and this paper represents a more comprehensive description of normal healthy lacunae.

Micro-morphological properties of osteons reveal changes in cortical bone stability during aging, osteoporosis, and bisphosphonate treatment in women

SUMMARY

We analyzed morphological characteristics of osteons along with the geometrical indices of individual osteonal mechanical stability in young, healthy aged, untreated osteoporotic, and bisphosphonate-treated osteoporotic women. Our study revealed significant intergroup differences in osteonal morphology and osteocyte lacunae indicating different remodeling patterns with implications for fracture susceptibility.

INTRODUCTION

Bone remodeling is the key process in bone structural reorganization, and its alterations lead to changes in bone mechanical strength. Since osteons reflect different bone remodeling patterns, we hypothesize that the femoral cortices of females under miscellaneous age, disease and treatment conditions will display distinct osteonal morphology and osteocyte lacunar numbers along with different mechanical properties.

METHODS

The specimens used in this study were collected at autopsy from 35 female donors (young group, n = 6, age 32 ± 8 years; aged group, n = 10, age 79 ± 9 years; osteoporosis group, n = 10, age 81 ± 9 years; and bisphosphonate group, n = 9, age 81 ± 7 years). Von Kossa-modified stained femoral proximal diaphyseal sections were evaluated for osteonal morphometric parameters and osteocyte lacunar data. Geometrical indices of osteonal cross-sections were calculated to assess the mechanical stability of individual osteons, in terms of their resistance to compression, bending, and buckling.

RESULTS

The morphological assessment of osteons and quantification of their osteocyte lacunae revealed significant differences between the young, aged, osteoporosis and bisphosphonate-treated groups. Calculated osteonal geometric indices provided estimates of the individual osteons' resistance to compression, bending and buckling based on their size. In particular, the osteons in the bisphosphonate-treated group presented improved osteonal geometry along with increased numbers of osteocyte lacunae that had been formerly impaired due to aging and osteoporosis.

CONCLUSIONS

The data derived from osteons (as the basic structural units of the cortical bone) in different skeletal conditions can be employed to highlight structural factors contributing to the fracture susceptibility of various groups of individuals.

Morphometric analysis of osteonal architecture in bones from healthy young human male subjects using scanning electron microscopy

The shape and structure of bones is a topic that has been studied for a long time by morphologists and biologists with the goal of explaining the laws governing their development, aging and pathology. The osteonal architecture of tibial and femoral mid-diaphyses was examined morphometrically with scanning electron microscopy in four healthy young male subjects. In transverse sections of the mid-diaphysis, the total area of the anterior, posterior, lateral and medial cortex sectors was measured and analysed for osteonal parameters including osteon number and density, osteon total and bone area and vascular space area. Osteons were grouped into four classes including cutting heads (A), transversely cut osteons (B), longitudinally cut osteons (C) and sealed osteons (D). The morphometric parameters were compared between the inner (endosteal) and outer (periosteal) half of the cortex. Of 5927 examined osteons, 24.4% cutting heads, 71.1% transversely cut osteons, 2.3% longitudinally cut osteons and 2.2% sealed osteons were found. The interosteonic bone (measured as the area in a lamellar system that has lost contact with its own central canal) corresponded to 51.2% of the endosteal and 52.4% of the periosteal half-cortex. The mean number of class A cutting heads and class B osteons was significantly higher in the periosteal than in the endosteal half-cortex (P < 0.001 and P < 0.05, respectively), whereas there was no significant difference in density. The mean osteon total area, osteon bone area and vascular space area of both classes A and B were significantly higher (P < 0.001 for all three parameters) in the endosteal than in the periosteal half-cortex. The significant differences between the two layers of the cortex suggest that the osteoclast activity is distributed throughout the whole cortical thickness, with more numerous excavations in the external layer, but larger resorption lacunae closer to the marrow canal. A randomly selected population of 109 intact class B osteons was examined at higher magnification (350×) to count osteocyte lacuna and to analyse their relationship with osteon size parameters. The distribution frequency of the mean number of osteocyte lacunae increased with the increment in the sub-classes of osteon bone area, whereas the density did not show significant differences. The number of osteocyte lacunae had a direct correlation with the osteon bone area and the mean osteon wall thickness, as well as the mean number of lamellae. The osteocyte lacunae density showed an inverse relationship. These data suggest a biological regulation of osteoblast activity with a limit to the volume of matrix produced by each cell and proportionality with the number of available cells in the space of the cutting cone (total osteon area). The collected data can be useful as a set of control parameters in healthy human bone for studies on bone aging and metabolic bone diseases.