Betwixt and Between: Intracranial Perspective on Zygomatic Arch Plasticity and Function in Mammals

Regional variation of the cortical and trabecular bone material properties in the rabbit skull

The material properties of some bones are known to vary with anatomical location, orientation and position within the bone (e.g., cortical and trabecular bone). Details of the heterogeneity and anisotropy of bone is an important consideration for biomechanical studies that apply techniques such as finite element analysis, as the outcomes will be influenced by the choice of material properties used. Datasets detailing the regional variation of material properties in the bones of the skull are sparse, leaving many finite element analyses of skulls no choice but to employ homogeneous, isotropic material properties, often using data from a different species to the one under investigation. Due to the growing significance of investigating the cranial biomechanics of the rabbit in basic science and clinical research, this study used nanoindentation to measure the elastic modulus of cortical and trabecular bone throughout the skull. The elastic moduli of cortical bone measured in the mediolateral and ventrodorsal direction were found to decrease posteriorly through the skull, while it was evenly distributed when measured in the anteroposterior direction. Furthermore, statistical tests showed that the variation of elastic moduli between separate regions (anterior, middle and posterior) of the skull were significantly different in cortical bone, but was not in trabecular bone. Elastic moduli measured in different orthotropic planes were also significantly different, with the moduli measured in the mediolateral direction consistently lower than that measured in either the anteroposterior or ventrodorsal direction. These findings demonstrate the significance of regional and directional variation in cortical bone elastic modulus, and therefore material properties in finite element models of the skull, particularly those of the rabbit, should consider the heterogeneous and orthotropic properties of skull bone when possible.

Biomechanical correlates of zygomaxillary-surface shape in papionin primates and the effects of hard-object feeding on mangabey facial form

Extant African papioninans are distinguished from macaques by the presence of excavated facial fossae; however, facial excavation differs among taxa. Mangabeys (Cercocebus, Rungwecebus, and Lophocebus) exhibit fossae that invade the zygomatic forming pronounced suborbital fossae (SOFs). Larger-bodied Papio, Mandrillus, and Theropithecus have lateral rostral fossae with minimal/absent suborbital fossae. Because prior studies have shown that mangabeys exhibit adaptations to anterior dental loading (e.g., palatal retraction), it is plausible that mangabey SOFs represent structural accommodation to masticatory-system shape rather than facial allometry, as commonly hypothesized. We analyzed covariation between zygomaxillary-surface shape, masticatory-system shape, and facial size in 141 adult crania of Macaca fascicularis, Papio kindae, Cercocebus, and Lophocebus. These taxa represent the range of papionin SOF expression while minimizing size variation (narrow allometry). Masticatory-system landmarks (39) registered palate shape, bite points, masticatory muscle attachments, and the temporomandibular joint. Semilandmarks (450) captured zygomaxillary-surface shape. Following Procrustes superimposition with semilandmark sliding and principal components analyses, multivariate regression was used to explore allometry, and two-block partial least-squares analyses (within-configuration and separate-blocks) were used to examine covariation patterns. Scores on principal components 1-2 and the first partial least-square (PLS1) separate mangabeys from Macaca and Papio. Both zygomaxillary-surface shape and masticatory-system shape are correlated with size within taxa and facial morphotypes; however, regression distributions indicate morphotype shape differences are non-allometric. PLS1 accounts for ∼95% of shape covariance (p < 0.0001) and shows strong linear correlations (r-PLS = ∼0.95, p < 0.0001) between blocks. Negative PLS1 scores in mangabeys reflect deep excavation of the suborbital malar surface, palatal retraction, and anterior displacement of jaw adductor muscles and the temporomandibular joint. Neither PC1 nor PLS1 scores ordinate specimens by facial size. Taken together, these results fail to support the allometric hypothesis but suggest that mangabey zygomaxillary morphology is closely linked with adaptations to hard-object feeding.

More Challenging Diets Sustain Feeding Performance: Applications Toward the Captive Rearing of Wildlife

The rescue and rehabilitation of young fauna is of substantial importance to conservation. However, it has been suggested that incongruous diets offered in captive environments may alter craniofacial morphology and hinder the success of reintroduced animals. Despite these claims, to what extent dietary variation throughout ontogeny impacts intrapopulation cranial biomechanics has not yet been tested. Here, finite element models were generated from the adult crania of 40 rats (n = 10 per group) that were reared on 4 different diet regimes and stress magnitudes compared during incisor bite simulations. The diets consisted of (1) exclusively hard pellets from weaning, (2) exclusively soft ground pellet meal from weaning, (3) a juvenile switch from pellets to meal, and (4) a juvenile switch from meal to pellets. We hypothesized that a diet of exclusively soft meal would result in the weakest adult skulls, represented by significantly greater stress magnitudes at the muzzle, palate, and zygomatic arch. Our hypothesis was supported at the muzzle and palate, indicating that a diet limited to soft food inhibits bone deposition throughout ontogeny. This finding presents a strong case for a more variable and challenging diet during development. However, rather than the "soft" diet group resulting in the weakest zygomatic arch as predicted, this region instead showed the highest stress among rats that switched as juveniles from hard pellets to soft meal. We attribute this to a potential reduction in number and activity of osteoblasts, as demonstrated in studies of sudden and prolonged disuse of bone. A shift to softer foods in captivity, during rehabilitation after injury in the wild for example, can therefore be detrimental to healthy development of the skull in some growing animals, potentially increasing the risk of injury and impacting the ability to access full ranges of wild foods upon release. We suggest captive diet plans consider not just nutritional requirements but also food mechanical properties when rearing wildlife to adulthood for reintroduction.

Mechanical properties of food and masticatory behavior in llamas, Llama glama

Mammals typically process food items more extensively in their oral cavities than do other vertebrates. Dental morphology, jaw-muscle activity patterns, mandibular movements, and tongue manipulation work to facilitate oral fragmentation of dietary items. While processing mechanically challenging foods, mammals modulate mandibular movements and bite forces via recruitment of greater jaw-adductor muscle forces and protracted biting or chewing. Because jaw-loading patterns are influenced by magnitude; frequency; and duration of muscular, bite, and reaction forces during routine feeding behaviors, relatively larger jaws are thought to be more characteristic of mammals that experience higher masticatory loads due to the processing of mechanically challenging foods. The ease of food fracture during post-canine biting and chewing is mainly determined by food stiffness and toughness. Such foods have been associated with increased loading magnitude and/or greater amounts of cyclical loading (i.e., chewing duration). Dietary properties are thought to modulate cyclical loading through changes in chewing frequency and chewing investment. On the other hand, chewing frequency has been found to be independent of dietary properties in rabbits and primates; however, little evidence exists regarding the influence of dietary properties on these parameters in a broader range of mammals. Here, we assessed chewing behavior in seven adult llamas (Llama glama) processing foods with a wide range of mechanical properties (grain, hay, carrots, and dried corn). Each subject was filmed at 60 frames/s, with video slowed for frame-by-frame computer analysis to obtain length of feeding bout and number of chewing cycles for each food type. These parameters were used to calculate chewing frequency (chews/s), chewing investment (chews/g), and chewing duration (s/g). Chewing frequency was not significantly related to mechanical properties of food, but chewing investment and chewing duration were significantly related to dietary stiffness and toughness. Therefore, cyclical loading is positively influenced by stiff and tough foods. This suggests that variation in jaw morphology in extinct and extant mammals is positively related to dietary stiffness and toughness, which requires greater chewing investment and increased chewing duration.

Lagomorpha as a Model Morphological System

Due to their global distribution, invasive history, and unique characteristics, European rabbits are recognizable almost anywhere on our planet. Although they are members of a much larger group of living and extinct mammals [Mammalia, Lagomorpha (rabbits, hares, and pikas)], the group is often characterized by several well-known genera (e.g., Oryctolagus, Sylvilagus, Lepus, and Ochotona). This representation does not capture the extraordinary diversity of behavior and form found throughout the order. Model organisms are commonly used as exemplars for biological research, but there are a limited number of model clades or lineages that have been used to study evolutionary morphology in a more explicitly comparative way. We present this review paper to show that lagomorphs are a strong system in which to study macro- and micro-scale patterns of morphological change within a clade that offers underappreciated levels of diversity. To this end, we offer a summary of the status of relevant aspects of lagomorph biology.

Computational biomechanical modelling of the rabbit cranium during mastication

Although a functional relationship between bone structure and mastication has been shown in some regions of the rabbit skull, the biomechanics of the whole cranium during mastication have yet to be fully explored. In terms of cranial biomechanics, the rabbit is a particularly interesting species due to its uniquely fenestrated rostrum, the mechanical function of which is debated. In addition, the rabbit processes food through incisor and molar biting within a single bite cycle, and the potential influence of these bite modes on skull biomechanics remains unknown. This study combined the in silico methods of multi-body dynamics and finite element analysis to compute musculoskeletal forces associated with a range of incisor and molar biting, and to predict the associated strains. The results show that the majority of the cranium, including the fenestrated rostrum, transmits masticatory strains. The peak strains generated over all bites were found to be attributed to both incisor and molar biting. This could be a consequence of a skull shape adapted to promote an even strain distribution for a combination of infrequent incisor bites and cyclic molar bites. However, some regions, such as the supraorbital process, experienced low peak strain for all masticatory loads considered, suggesting such regions are not designed to resist masticatory forces.

Bone remodeling and cyclical loading in maxillae of New Zealand white rabbits (Oryctolagus cuniculus)

Mammalian feeding behaviors are altered when mechanically challenging (e.g., tough, stiff) foods require large bite forces or prolonged mastication. Bony responses to high bite forces are well-documented for the mammalian skull, but osteogenesis due to cyclical loading, caused by repetitive chewing, is more poorly understood. Previous studies demonstrate that cyclical loading results in greater bone formation in the rabbit masticatory apparatus and in substantial Haversian remodeling in primate postcrania. Here we assess the relationship between cyclical loading and remodeling in the rabbit maxilla. Twenty male New Zealand white rabbits (Oryctolagus cuniculus) were raised on either an overuse or control diet (10 per group) for 48 weeks, beginning at weaning onset. The control group was raised on a diet of rabbit pellets (E = 29 MPa, R = 1031 J/m² ), whereas the overuse group ate rabbit pellets and hay, which has high stiffness (E = 3336 MPa) and toughness (R = 2760 J/m² ) properties. Hay requires greater chewing investment (475 chews/g) and longer chewing durations (568 s/g) than pellets (161 chews/g and 173 s/g), therefore causing cyclical loading of the jaws. Remodeling was measured as osteon population density (OPD), percent Haversian bone (%HAV), and osteon cross-sectional area (On.Ar). The only significant difference found was greater On.Ar in the alveolar region of the maxilla (p < 0.001) in the overuse group. The hypothesis that cyclical loading engenders Haversian remodeling in the developing maxilla is not supported. The continuation of modeling throughout the experimental duration may negate the need for remodeling as newly laid bone tends to be more compliant and resistant to crack propagation.

Internal architecture of the mandibular condyle of rabbits is related to dietary resistance during growth

Although there is considerable evidence that bone responds to the loading environment in which it develops, few analyses have examined phenotypic plasticity or bone functional adaptation in the masticatory apparatus. Prior work suggests that masticatory morphology is sensitive to differences in food mechanical properties during development; however, the importance of the timing/duration of loading and variation in naturalistic diets is less clear. Here, we examined microstructural and macrostructural differences in the mandibular condyle in four groups of white rabbits (Oryctolagus cuniculus) raised for a year on diets that varied in mechanical properties and timing of the introduction of mechanically challenging foods, simulating seasonal variation in diet. We employed sliding semilandmarks to locate multiple volumes of interest deep to the mandibular condyle articular surface, and compared bone volume fraction, trabecular thickness and spacing, and condylar size/shape among experimental groups. The results reveal a shared pattern of bony architecture across the articular surface of all treatment groups, while also demonstrating significant among-group differences. Rabbits raised on mechanically challenging diets have significantly increased bone volume fraction relative to controls fed a less challenging diet. The post-weaning timing of the introduction of mechanically challenging foods also influences architectural properties, suggesting that bone plasticity can extend well into adulthood and that bony responses to changes in loading may be rapid. These findings demonstrate that bony architecture of the mandibular condyle in rabbits responds to variation in mechanical loading during an organism's lifetime and has the potential to track dietary variation within and among species.

Individual variation of the masticatory system dominates 3D skull shape in the herbivory-adapted marsupial wombats

Background

Within-species skull shape variation of marsupial mammals is widely considered low and strongly size-dependent (allometric), possibly due to developmental constraints arising from the altricial birth of marsupials. However, species whose skulls are impacted by strong muscular stresses – particularly those produced through mastication of tough food items – may not display such intrinsic patterns very clearly because of the known plastic response of bone to muscle activity of the individual. In such cases, allometry may not dominate within-species shape variation, even if it is a driver of evolutionary shape divergence; ordination of shape in a geometric morphometric context through principal component analysis (PCA) should reveal main variation in areas under masticatory stress (incisor region/zygomatic arches/mandibular ramus); but this main variation should emerge from high individual variability and thus have low eigenvalues.

Results

We assessed the evidence for high individual variation through 3D geometric morphometric shape analysis of crania and mandibles of three species of grazing-specialized wombats, whose diet of tough grasses puts considerable strain on their masticatory system. As expected, we found little allometry and low Principal Component 1 (PC1) eigenvalues within crania and mandibles of all three species. Also as expected, the main variation was in the muzzle, zygomatic arches, and masticatory muscle attachments of the mandibular ramus. We then implemented a new test to ask if the landmark variation reflected on PC1 was reflected in individuals with opposite PC1 scores and with opposite shapes in Procrustes space. This showed that correspondence between individual and ordinated shape variation was limited, indicating high levels of individual variability in the masticatory apparatus.

Discussion

Our results are inconsistent with hypotheses that skull shape variation within marsupial species reflects a constraint pattern. Rather, they support suggestions that individual plasticity can be an important determinant of within-species shape variation in marsupials (and possibly other mammals) with high masticatory stresses, making it difficult to understand the degree to which intrinsic constraints act on shape variation at the within-species level. We conclude that studies that link micro- and macroevolutionary patterns of shape variation might benefit from a focus on species with low-impact mastication, such as carnivorous or frugivorous species.

Non-sutural basicranium-derived cells undergo a unique mineralization pathway via a cartilage intermediate in vitro

The basicranium serves as a key interface in the mammalian skull, interacting with the calvarium, facial skeleton and vertebral column. Despite its critical function, little is known about basicranial bone formation, particularly on a cellular level. The goal of this study was therefore to cultivate a better understanding of basicranial development by isolating and characterizing the osteogenic potential of cells from the neonatal murine cranial base. Osteoblast-like basicranial cells were isolated, seeded in multicellular aggregates (designated micromasses), and cultured in osteogenic medium in the presence or absence of bone morphogenetic protein-6 (BMP6). A minimal osteogenic response was observed in control osteogenic medium, while BMP6 treatment induced a chondrogenic response followed by up-regulation of osteogenic markers and extensive mineralization. This response appears to be distinct from prior analyses of the calvarium and long bones, as basicranial cells did not mineralize under standard osteogenic conditions, but rather required BMP6 to stimulate mineralization, which occurred via an endochondral-like process. These findings suggest that this site may be unique compared to other cranial elements as well as the limb skeleton, and we propose that the distinct characteristics of these cells may be a function of the distinct properties of the basicranium: endochondral ossification, dual embryology, and complex loading environment.

Developmental constraint through negative pleiotropy in the zygomatic arch

BACKGROUND

Previous analysis suggested that the relative contribution of individual bones to regional skull lengths differ between inbred mouse strains. If the negative correlation of adjacent bone lengths is associated with genetic variation in a heterogeneous population, it would be an example of negative pleiotropy, which occurs when a genetic factor leads to opposite effects in two phenotypes. Confirming negative pleiotropy and determining its basis may reveal important information about the maintenance of overall skull integration and developmental constraint on skull morphology.

RESULTS

We identified negative correlations between the lengths of the frontal and parietal bones in the midline cranial vault as well as the zygomatic bone and zygomatic process of the maxilla, which contribute to the zygomatic arch. Through gene association mapping of a large heterogeneous population of Diversity Outbred (DO) mice, we identified a quantitative trait locus on chromosome 17 driving the antagonistic contribution of these two zygomatic arch bones to total zygomatic arch length. Candidate genes in this region were identified and real-time PCR of the maxillary processes of DO founder strain embryos indicated differences in the RNA expression levels for two of the candidate genes, Camkmt and Six2.

CONCLUSIONS

A genomic region underlying negative pleiotropy of two zygomatic arch bones was identified, which provides a mechanism for antagonism in component bone lengths while constraining overall zygomatic arch length. This type of mechanism may have led to variation in the contribution of individual bones to the zygomatic arch noted across mammals. Given that similar genetic and developmental mechanisms may underlie negative correlations in other parts of the skull, these results provide an important step toward understanding the developmental basis of evolutionary variation and constraint in skull morphology.

Evolution of the Jugal/Zygomatic Bones

This issue of the Anatomical Record is the second of a two-volume set on the zygoma (also called the cheek bone, the zygomatic bone, the malar, or the jugal, the latter term being used in vertebrates other than mammals). The zygoma is an important component of the craniofacial skeleton, in which the zygoma is a connection between the midfacial and the cranial skeletons; has a functional role as the origin of one of the masticatory muscles, the masseter muscle, and several facial muscles; has been considered as an essential buttress of the facial skeleton for resisting masticatory forces; and has importance for determining phylogenetic relationships. In humans, the zygoma is also of aesthetic significance for facial appearance, and its restoration following trauma has resulted in a large clinical literature. In this second half of the special issue on the zygoma, a series of papers discuss studies related to evolution of the zygoma and related parts of the craniofacial skeleton throughout the vertebrates, and in particular in human evolution. There are also a series of articles discussing variation of the zygoma in modern humans. This article is an overview in which we discuss the primary findings of these studies and some of their implications. Anat Rec, 300:12-15, 2017. © 2016 Wiley Periodicals, Inc.

Dietary variation and mechanical properties of articular cartilage in the temporomandibular joint: implications for the role of plasticity in mechanobiology and pathobiology

Due to their nature as tissue composites, skeletal joints pose an additional challenge in terms of evaluating the functional significance of morphological variation in their bony and cartilaginous components in response to altered loading conditions. Arguably, this complexity requires more direct means of investigating joint plasticity and performance than typically employed to analyze macro- and micro-anatomical phenomena. To address a significant gap in our understanding of the plasticity of the mammalian temporomandibular joint (TMJ), we investigated the histology and mechanical properties of condylar articular cartilage in rabbits subjected to long-term variation in diet-induced masticatory stresses, specifically cyclical loading. Three cohorts of male weanlings were raised for six months on different diets until adulthood. Following euthanasia, the TMJ condyles on one side were dissected away, fixed, decalcified, dehydrated, embedded and sectioned. Safranin O staining was employed to identify variation in proteoglycan content, which in turn was used to predict patterns of articular cartilage stiffness in contralateral condylar specimens for each treatment group. Hematoxylin and eosin staining was used to quantify diet-induced changes in chondrocyte hypertrophy and cellularity. Mechanical tests document significant decreases in articular cartilage stiffness corresponding to patterns of extracellular matrix relative protein abundance in rabbits subjected to greater cyclical loading. This indicates that TMJs routinely subjected to higher masticatory stresses due to a challenging diet eventually develop postnatal decreases in the ability to counter compressive loads during postcanine biting and chewing. These findings provide novel information regarding TMJ performance, with broader implications about the costs and benefits of phenotypic plasticity as well as implications for how such biological processes affect connective tissue mechanobiology and pathobiology.

Development, Structure, and Function of the Zygomatic Bones: What is New and Why Do We Care?

This issue of The Anatomical Record is the first of a two-volume set on the zygoma (also called the cheek bone, the zygomatic bone, the malar, or the jugal, the latter term being used in vertebrates other than mammals). The zygoma is an important component of the craniofacial skeleton, in which the zygoma is a connection between the midfacial and the cranial skeletons; has a functional role as the origin of one of the masticatory muscles, the masseter muscle, and several facial muscles; has been considered as an essential buttress of the facial skeleton for resisting masticatory forces; and has importance for determining phylogenetic relationships. In humans, the zygoma is also of aesthetic significance for facial appearance, and its restoration following trauma has resulted in a large clinical literature. In this first volume of this Special Issue, a wide ranging series of papers discuss studies related to issues of development, structure, and function of the zygoma and closely related parts of the craniofacial skeleton in mammals, and in particular primates. This Introductory article provides an overview in which we discuss the primary findings of these studies and some of their implications. The second volume, which will be published as the January 2017 issue of The Anatomical Record, will focus on variation and evolution of the zygoma throughout the vertebrates. Anat Rec, 299:1611-1615, 2016. © 2016 Wiley Periodicals, Inc.

Ontogenetic and functional modularity in the rodent mandible

The material properties of diets consumed by juvenile individuals are known to affect adult morphological outcomes. However, much of the current experimental knowledge regarding dietary effects on masticatory form is derived from studies in which individuals are fed a non-variable diet for the duration of their postweaning growth period. Thus, it remains unclear how intra-individual variation in diet, due to ontogenetic variation in feeding behaviors or seasonal resource fluctuations, affects the resulting adult morphology. Furthermore, the mandible is composed of multiple developmental and functional subunits, and the extent to which growth and plasticity among these modules is correlated may be misestimated by studies that examine non-variable masticatory function in adults only. To address these gaps in our current knowledge, this study raised Sprague Dawley rats (n=42) in four dietary cohorts from weaning to skeletal maturity. Two cohorts were fed a stable ("annual") diet of either solid or powdered pellets. The other two cohorts were fed a variable ("seasonal") diet consisting of solid/powdered pellets for the first half of the study, followed by a shift to the opposite diet. Results of longitudinal morphometric analyses indicate that variation in the mandibular corpus is more prominent at immature ontogenetic stages, likely due to processes of dental eruption and the growth of tooth roots. Furthermore, adult morphology is influenced by both masticatory function and the ontogenetic timing of this function, e.g., the consumption of a mechanically resistant diet. The morphology of the coronoid process was found to separate cohorts on the basis of their early weanling diet, suggesting that the coronoid process/temporalis muscle module may have an early plasticity window related to high growth rates during this life stage. Conversely, the morphology of the angular process was found to be influenced by the consumption of a mechanically resistant diet at any point during the growth period, but with a tendency to reflect the most recent diet. The prolonged plasticity window of the angular process/pterygomasseteric muscle module may be related to delayed ossification and muscular maturation within this module. The research presented here highlights the importance of more naturalistic models of mammalian feeding, and underscores the need for a better understanding of the processes of both morphological and behavioral maturation that follow weaning.

Intracranial and hierarchical perspective on dietary plasticity in mammals

The effect of dietary properties on craniofacial form has been the focus of numerous functional studies, with increasingly more work dedicated to the importance of phenotypic plasticity. As bone is a dynamic tissue, morphological variation related to differential loading is well established for many masticatory structures. However, the adaptive osteogenic response of several cranial sites across multiple levels of bony organization remains to be investigated. Here, rabbits were obtained at weaning and raised for 48 weeks until adulthood in order to address the naturalistic influence of altered loading on the long-term development of masticatory and non-masticatory elements. Longitudinal data from micro-computed tomography (μCT) scans were used to test the hypothesis that variation in cortical bone formation and biomineralization in masticatory structures is linked to increased stresses during oral processing of mechanically challenging foods. It was also hypothesized that similar parameters for neurocranial structures would be minimally affected by varying loads as this area is characterized by low strains during mastication and reduced hard-tissue mechanosensitivity. Hypotheses were supported regarding bone formation for maxillomandibular and neurocranial elements, though biomineralization trends of masticatory structures did not mirror macroscale findings. Varying osteogenic responses in masticatory elements suggest that physiological adaptation, and corresponding variation in skeletal performance, may reside differentially at one level of bony architecture, potentially affecting the accuracy of behavioral and in silico reconstructions. Together, these findings underscore the complexity of bone adaptation and highlight functional and developmental variation in determinants of skull form.

Bone up: craniomandibular development and hard-tissue biomineralization in neonate mice

The presence of regional variation in the osteogenic abilities of cranial bones underscores the fact that the mechanobiology of the mammalian skull is more complex than previously recognized. However, the relationship between patterns of cranial bone formation and biomineralization remains incompletely understood. In four strains of mice, micro-computed tomography was used to measure tissue mineral density during perinatal development in three skull regions (calvarium, basicranium, mandible) noted for variation in loading environment, embryological origin, and ossification mode. Biomineralization levels increased during perinatal ontogeny in the mandible and calvarium, but did not increase in the basicranium. Tissue mineral density levels also varied intracranially, with density in the mandible being highest, in the basicranium intermediate, and in the calvarium lowest. Perinatal increases in, and elevated levels of, mandibular biomineralization appear related to the impending postweaning need to resist elevated masticatory stresses. Similarly, perinatal increases in calvarial biomineralization may be linked to ongoing brain expansion, which is known to stimulate sutural bone formation in this region. The lack of perinatal increase in basicranial biomineralization could be a result of earlier developmental maturity in the cranial base relative to other skull regions due to its role in supporting the brain's mass throughout ontogeny. These results suggest that biomineralization levels and age-related trajectories throughout the skull are influenced by the functional environment and ontogenetic processes affecting each region, e.g., onset of masticatory loads in the mandible, whereas variation in embryology and ossification mode may only have secondary effects on patterns of biomineralization. Knowledge of perinatal variation in tissue mineral density, and of normal cranial bone formation early in development, may benefit clinical therapies aiming to correct developmental defects and traumatic injuries in the skull, and more generally characterize loading environments and skeletal adaptations in mammals by highlighting the need for multi-level analyses for evaluating functional performance of cranial bone.