Mono- and Di(dimethylamino)styryl-Substituted Borondipyrromethene and Borondiindomethene Dyes with Intense Near-Infrared Fluorescence

Ratiometric Molecularly Imprinted Particle Probes for Reliable Fluorescence Signaling of Carboxylate-Containing Molecules

In addition to sensitivity, selectivity, and portability, chemical sensing systems must generate reliable signals and offer modular configurability to address various small molecule targets, particularly in environmental applications. We present a versatile, modular strategy utilizing ratiometric molecularly imprinted particle probes based on BODIPY indicators and dyes for recognition and internal referencing. Our approach employs polystyrene core particles doped with a red fluorescent BODIPY as an internal standard, providing built-in reference for environmental influences. A molecularly imprinted polymer (MIP) recognition shell, incorporating a green-fluorescent BODIPY indicator monomer with a thiourea binding site for carboxylate-containing analytes, is grafted from the core particles in the presence of the analyte as the template. The dual-fluorescent MIP probe detects fexofenadine as the model analyte with a change in green emission signal referenced against a stable red signal, achieving a detection limit of 0.13 μM and a broad dynamic range from 0.16 μM to 1.2 mM, with good discrimination against other antibiotics in acetonitrile. By selecting a versatile dye scaffold and recognition element, this approach can be extended to other carboxylate-containing analytes and/or wavelength combinations, potentially serving as a robust multiplexing platform.

Near-infrared BODIPY photosensitizers for two-photon excited singlet oxygen generation and tumor cell photodynamic therapy

In this paper, two near-infrared BODIPY photosensitizers, Id-BDPI and Cz-BDPI, were obtained by modifying the indole and carbazole aromatic heterocycles in the core of BODIPY. The maximum absorption wavelengths of Id-BDPI and Cz-BDPI were 694 nm and 722 nm, and their singlet oxygen yields were 48% and 48.4%, respectively. In the simulated tumor cell photodynamic therapy, Id-BDPI and Cz-BDPI could effectively inhibit the growth of A549 tumor cells under near-infrared light. Meanwhile, the lysosomal co-localization coefficients of Id-BDPI and Cz-BDPI with A549 tumor cells were 0.94 and 0.89, respectively, showing high lysosomal targeting ability and biocompatibility. The two-photon absorption cross sections measured at 1050 nm by the Z-scanning method were 661.8 GM and 715.6 GM, respectively, and Cz-BDPI was further successfully applied to two-photon fluorescence imaging and two-photon excited singlet oxygen generation in zebrafish. The above results indicate that the introduction of aromatic heterocycles can effectively enhance the photodynamic efficacy of BODIPY photosensitizers, and the larger two-photon absorption cross section also brings potential for two-photon photodynamic therapy applications.

Synthesis of Bodipy-Tagged Galactoconjugates and Evaluation of Their Antibacterial Properties

As a development of our research on biocompatible glycoconjugate probes and specifically multi-chromophoric systems, herein, we report the synthesis and early bactericidal tests of two luminescent glycoconjugates whose basic structure is characterized by two boron dipyrromethene difluoride (BODIPY) moieties and three galactoside rings mounted on an oligophenylene ethynylene (OPE) skeleton. BODIPY fluorophores have found widespread application in many branches of biology in the last few decades. In particular, molecular platforms showing two different BODIPY groups have unique photophysical behavior useful in fluorescence imaging. Construction of the complex architecture of the new probes is accomplished through a convergent route that exploits a series of copper-free Heck-Cassar-Sonogashira cross-couplings. The great emergency due to the proliferation of bacterial infections, in conjunction with growing antibiotic resistance, requires the production of new multifunctional drugs and efficient methods for their targeted delivery to control bacteria-associated diseases. Preliminary studies of the glycoconjugate properties as antibacterial agents against representatives of Gram-negative (P. aeruginosa) and Gram-positive (S. aureus) pathogens, which are associated with chronic infections, indicated significant bactericidal activity ascribable to their structural features.

A near-infrared emitting "off-on" fluorescent probe for bioimaging of Pd(Ⅱ) ions in living cells and mice

BACKGROUND

The surging consumption of palladium in modern industry has given rise to its accumulation in the ecosystem, posing conspicuous toxicity to aquatic organisms and human health. The investigation of palladium in biological systems is highly demanded for the in-depth understanding of its dynamics and behaviors. Fluorescence imaging serves as a powerful approach to assess palladium species in biological systems, and currently most of the sensing probes are applicable to living cells. Effective tracking of palladium species in living organisms is challenging, which requires sufficient hydrophilicity and imaging depth of the probes.

RESULTS

Based on an intramolecular charge transfer (ICT) mechanism, a distyryl boron dipyrromethene (BODIPY) derivative (DISBDP-Pd) has been prepared for the near-infrared (NIR) fluorescence imaging of Pd2+ ions. Two additional methoxy triethylene glycol (TEG) chains could serve as flexible and hydrophilic moieties to enhance the aqueous solubility and cell permeability of the extended conjugate. Solution studies revealed that DISBDP-Pd exhibited a NIR fluorescence enhancement signal exclusively to Pd2+ ions (detection limit as low as 0.85 ppb) with negligible interference from Pd0 species and other closely related metal ions. Computational calculations have been performed to rationalize the binding mode and the mechanism of action. Fluorescence imaging assays have been conducted on A549 human non-small cell lung carcinoma cells and mouse models. Exhibiting negligible cytotoxicity, DISBDP-Pd demonstrated concentration-related fluorescence enhancement signals in response to Pd2+ ions in living cells and mice.

SIGNIFICANCE

DISBDP-Pd exhibits advantages over many small molecule palladium probes in terms of satisfactory aqueous solubility, high sensitivity and selectivity, and biocompatible NIR emission property, which are particularly favorable for the sensing application in biological environments. The design strategy of this probe can potentially be adopted for the functionalization of other BODIPY probes implemented for NIR fluorescence bioimaging.

Acetoxymethyl-BODIPY dyes: a universal platform for the fluorescent labeling of nucleophiles

A general and robust methodology has been developed for the direct incorporation of a wide variety of C-, N-, P-, O-, S-, and halo-nucleophiles into functional BODIPY conjugates in a single reaction step.

Improving the fluorescence brightness of distyryl Bodipys by inhibiting the twisted intramolecular charge transfer excited state

A new class of NIR distyryl Bodipy fluorescent dyes were developed with sulfone- and quaternary ammonium-modified piperidines as auxochromes instead of conventional dialkylamino auxochromes. Such modification markedly improved the fluorescence quantum yields due to the efficient inhibition of the twisted intramolecular charge transfer (TICT) state. Based on the dye platform, we developed a new fluorescent H₂O₂ probe via self-immolative chemistry, and confirmed its capability to sensitively and selectively sense H₂O₂in vitro and in vivo.

Polystyrene Microparticles with Convergently Grown Mesoporous Silica Shells as a Promising Tool for Multiplexed Bioanalytical Assays

Functional core/shell particles are highly sought after in analytical chemistry, especially in methods suitable for single-particle analysis such as flow cytometry because they allow for facile multiplexed detection of several analytes in a single run. Aiming to develop a powerful bead platform of which the core particle can be doped in a straightforward manner while the shell offers the highest possible sensitivity when functionalized with (bio)chemical binders, polystyrene particles were coated with different kinds of mesoporous silica shells in a convergent growth approach. Mesoporous shells allow us to obtain distinctly higher surface areas in comparison with conventional nonporous shells. While assessing the potential of narrow- as well as wide-pore silicas such as Mobil composition of matter no. 41 (MCM-41) and Santa Barbara amorphous material no. 15 (SBA-15), especially the synthesis of the latter shells that are much more suitable for biomolecule anchoring was optimized by altering the pH and both, the amount and type of the mediator salt. Our studies showed that the best performing material resulted from a synthesis using neutral conditions and MgSO₄ as an ionic mediator. The analytical potential of the particles was investigated in flow cytometric DNA assays after their respective functionalization for individual and multiplexed detection of short oligonucleotide strands. These experiments revealed that a two-step modification of the silica surface with amino silane and succinic anhydride prior to coupling of an amino-terminated capture DNA (c-DNA) strand is superior to coupling carboxylic acid-terminated c-DNA to aminated core/shell particles, yielding limits of detection (LOD) down to 5 pM for a hybridization assay, using labeled complementary single-stranded target DNA (t-DNA) 15mers. The potential of the use of the particles in multiplexed analysis was shown with the aid of dye-doped core particles carrying a respective SBA-15 shell. Characteristic genomic sequences of human papillomaviruses (HPV) were chosen as the t-DNA analytes here, since their high relevance as carcinogens and the high number of different pathogens is a relevant model case. The title particles showed a promising performance and allowed us to unequivocally detect the different high- and low-risk HPV types in a single experimental run.

A Reconfigurable, Dual-Output INHIBIT and IMPLICATION Molecular Logic Gate

Molecules that respond to input stimulations to produce detectable outputs can be exploited to mimic Boolean logic operators and reproduce basic arithmetic functions. We have designed a two-state fluorescent probe with tunable emission wavelength for the construction of a molecular logic gate with reconfigurable single- or dual-output capability. The system is based on a BODIPY skeleton coupled with 4-(dimethylamino)benzaldehyde. The behavior of the molecular logic gate can be easily investigated in solution with fluorescence spectroscopy, and the optical readout (fluorescence) can be monitored in one (green) or two (green and red) channels. Depending on the solvent of choice, single INHIBIT or dual INHIBIT/IMPLY logic functions can be achieved using chemical inputs (acid and base). Reconfiguration from single- to dual-output is thus made possible by operating the system in acetonitrile (single output) or toluene (dual output), respectively. The logic gate can be switched by manipulating the fluorescence emission via protonation or deprotonation, even when immobilized onto a glass substrate. At the solid state, the resulting output can be stored for extended periods of time. This feature provides two added benefits: (i) memory function and (ii) "set/reset" capability of the logic gate. Our design thus provides a proof-of-concept interface between the molecular and electronic domains.

Photodynamic activity of 2,6-diiodo-3,5-dithienylvinyleneBODIPYs and their folate-functionalized chitosan-coated Pluronic® F-127 micelles on MCF-7 breast cancer cells

A 2,6-diiodo-3,5-dithienylvinyleneBODIPY dye was prepared and encapsulated with folate-chitosan capped Pluronic[Formula: see text] F-127 to provide drug delivery systems for photodynamic therapy (PDT). Moderately enhanced singlet oxygen quantum yields were observed for the dye encapsulation complexes in water. The in vitro dark cytotoxicity and photodynamic activity were investigated on the human breast adenocarcinoma (MCF-7) cell line. Minimal dark cytotoxicity was observed for the BODIPY dyes in 5% DMSO and when encapsulated in folate-functionalized chitosan-coated Pluronic[Formula: see text] F-127 micelles, since the cell viability values are consistently greater than 80% over the 0-40 [Formula: see text] concentration range. Upon irradiation of the samples, significant cytocidal activity was observed for the encapsulation complex of a 2,6-diiodo-8-dimethylaminophenyl-3,5-dithienylvinyleneBODIPY dye with less than 50% viable cells observed at concentrations [Formula: see text].

Engineering pH-Responsive BODIPY Nanoparticles for Tumor Selective Multimodal Imaging and Phototherapy

It is a challenge to develop multifunctional theranostic agents in one molecule, which simultaneously possesses tumor imaging ability with a high signal-to-noise ratio and excellent therapeutic activity. In this work, we synthesized and screened a series of BODIPY (BDP) with various absorption and fluorescence. The interplay of the molecular structure, pH-sensitive absorption and emission, and photodynamic and photothermal activities was well studied in detail. Photoinduced electron transfer, intramolecular charge transfer, and heavy atom effect were leveraged to engineer BDP with tumor imaging and therapeutic functions. The BDP nanoparticle formulations possessed multifunctional biological features, including selective treatment of cancer cells, near-infrared fluorescence, photoacoustic and computed tomography imaging, and photodynamic and photothermal therapy, as validated by cellular and animal experiments. These results not only give a new horizon to multifunctional BDP for biological applications but also show a new way to design the organic dye for tumor imaging and phototherapy.

Multifunctional Polystyrene Core/Silica Shell Microparticles with Antifouling Properties for Bead-Based Multiplexed and Quantitative Analysis

Commercial bead-based assays are commonly built upon polystyrene particles. The polymeric carrier can be encoded with organic dyes and has ideal material properties for cytometric applications such as low density and high refractive index. However, functional groups are conventionally integrated during polymerization and subsequent modification is limited to the reactivity of those groups. Additionally, polystyrene as the core material leads to many hydrophobic areas still being present on the beads' surfaces even after functionalization, rendering the particles prone to nonspecific adsorption during an application. The latter calls for several washing steps and the use of additives in (bio)analytical assays. In this contribution, we show how these limitations can be overcome by using monodisperse polystyrene (PS) core/silica (SiO₂) shell particles (SiO₂@PS). Two different hydrophobic BODIPY (boron-dipyrromethene) dyes were encapsulated inside a poly(vinylpyrrolidone) (PVP) -stabilized polystyrene core in different concentrations to create 5-plex arrays in two separate detection channels of a cytometer. A subsequent modification of the silica shell with an equimolar APTES/PEGS (aminopropyltriethoxysilane/polyethylene glycol silane) blend added multifunctional properties to the hybrid core/shell microparticles in a single step: APTES provides amino groups for the attachment of a caffeine derivative (as a hapten) to create antigen-coupled microspheres; the PEG moiety effectively suppresses nonspecific binding of antibodies, endowing the surface with antifouling properties. The particles were applied in a competitive fluorescence immunoassay in suspension, and a highly selective wash-free assay for the detection of caffeine in beverages was developed as a proof of concept.

Recent advances in the synthesis of [a]-benzo-fused BODIPY fluorophores

This feature article summarizes the different strategies for the synthesis of [a]-benzo-fused BODIPYs that have been reported in the literature until 2018. These π-extended BODIPYs are promising fluorophores for bio-imaging and organic photovoltaic applications due to both their attractive photophysical properties in the near-infrared area and their higher (photo)chemical stability compared to conventional bis-styryl derivatives. The four main strategies described in this review can be used to access either directly the expected [a]-benzo-fused BODIPYs or through the di-/tetra-hydroisoindole.

Synthesis of Water-Soluble Far-Red-Emitting Amphiphilic BODIPY Dyes

We report the synthesis of two water-soluble BODIPY dyes with far-red absorption and near-infrared fluorescence following cell membrane insertion. Introduction of dicationic or dianionic groups imparts water solubility and prevents translocation of the dye through the plasma membrane for highly effective labeling. The dicationic form is particularly well localized to the plasma membrane and resists quenching even after >8 min of continuous light exposure. The dyes are almost completely nonemissive in water and other highly polar solvents, but display high-fluorescence yields in chloroform and upon insertion into the extracellular leaflet.

A Straightforward Substitution Strategy to Tune BODIPY Dyes Spanning the Near-Infrared Region via Suzuki⁻Miyaura Cross-Coupling

In this study, a series of new red and near-infrared (NIR) dyes derived from 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) were developed by introducing thiophene and its derivatives to the 3- and 5- positions of the dichloroBODIPY core. For the first time, cyclictriol boronates and N-methyliminodiacetic acid (MIDA) boronate were used as organoboron species to couple with 3,5-dichloroBODIPY via the one-step Suzuki–Miyaura cross-coupling. Six kinds of thieno-expended BODIPY dyes were synthesized in acceptable yields ranging from 31% to 79%. All six dyes showed different absorption and emission wavelengths spanning a wide range (c.a. 600–850 nm) in the red and NIR regions with relatively high quantum yields (19–85%). Cellular imaging of 8-(2,6-dimethylphenyl)-re3,5-di(2-thienyl)-BODIPY (dye 1) was conducted using bovine cumulus cells, and the fluorescence microscopy images indicated that the chromophore efficiently accumulated and was exclusively localized in the cytoplasm, suggesting it could be utilized as a subcellular probe. All six dyes were characterized using 1H-NMR and mass spectrometry.

Highly Fluorescent Magnetic Nanobeads with a Remarkable Stokes Shift as Labels for Enhanced Detection in Immunoassays

Fluorescence immunoassays are popular for achieving high sensitivity, but they display limitations in biological samples due to strong absorption of light, background fluorescence from matrix components, or light scattering by the biomacromolecules. A powerful strategy to overcome these problems is introduced here by using fluorescent magnetic nanobeads doped with two boron-dipyrromethane dyes displaying intense emission in the visible and near-infrared regions, respectively. Careful matching of the emission and absorption features of the dopants leads to a virtual Stokes shift larger than 150 nm achieved by an intraparticle Förster resonance energy transfer (FRET) process between the donor and the acceptor dyes. Additionally, the magnetic properties of the fluorescent beads allow preconcentration of the sample. To illustrate the usefulness of this approach to increase the sensitivity of fluorescence immunoassays, the novel nanoparticles are employed as labels for quantification of the widely used Tacrolimus (FK506) immunosuppressive drug. The FRET-based competitive inhibition immunoassay yields a limit of detection (LOD) of 0.08 ng mL^-1 , with a dynamic range (DR) of 0.15-2.0 ng mL^-1 , compared to a LOD of 2.7 ng mL^-1 and a DR between 4.1 and 130 ng mL^-1 for the immunoassay carried out with direct excitation of the acceptor dye.

Disilanylene-bridged BODIPY-based D–σ–A architectures: a novel promising series of NLO chromophores

A novel series of disilanylene-bridged BODIPY-based chromophores have been reported.

Ratiometric Fluorescence Detection of Phosphorylated Amino Acids Through Excited-State Proton Transfer by Using Molecularly Imprinted Polymer (MIP) Recognition Nanolayers

A 2,3-diaminophenazine bis-urea fluorescent probe monomer (1) was developed. It responds to phenylphosphate and phosphorylated amino acids in a ratiometric fashion with enhanced fluorescence accompanied by the development of a redshifted emission band arising from an excited-state proton transfer (ESPT) process in the hydrogen-bonded probe/analyte complex. The two urea groups of 1 form a cleft-like binding pocket (K_b >10¹⁰  L²  mol^-2 for 1:2 complex). Imprinting of 1 in presence of ethyl ester- and fluorenylmethyloxycarbonyl (Fmoc)-protected phosphorylated tyrosine (Fmoc-pTyr-OEt) as the template, methacrylamide as co-monomer, and ethyleneglycol dimethacrylate as cross-linker gave few-nanometer-thick molecularly imprinted polymer (MIP) shells on silica core microparticles with excellent selectivity for the template in a buffered biphasic assay. The supramolecular recognition features were established by spectroscopic and NMR studies. Rational screening of co-monomers and cross-linkers allowed to single out the best performing MIP components, giving significant imprinting factors (IF>3.5) while retaining ESPT emission and the ratiometric response in the thin polymer shell. Combination of the bead-based detection scheme with the phase-transfer assay dramatically improved the IF to 15.9, allowing sensitive determination of the analyte directly in aqueous media.

Ethylene-Bridged Oligo-BODIPYs: Access to Intramolecular J-Aggregates and Superfluorophores

A versatile and rapid access to various chain lengths of ethylene-bridged BODIPY motifs was discovered. Corresponding oligomers comprising up to eight monomeric units were studied with respect to their microstructures by photophysical, X-ray crystallographic, and computational means. The investigation of three different dipyrrin cores revealed a crucial dependence on the substitution pattern of the core, whereas the nature of the meso-periphery is less critical. The impact of substituent effects on the conformational space was investigated by Monte Carlo simulations and a set of DFT methods (B3LYP, PBEh-3c, TPSS/PWPB95), including dispersion effects. Cryptopyrrole-derived oligo-BODIPYs are characterized by a tight intramolecular arrangement triggering a dominant J-type excitonic coupling with red-shifts up to 45 nm, exceptionally small line widths of the absorption and emission event (up to 286 cm^-1), outstandingly high attenuation coefficients (up to 1 042 000 M^-1 cm^-1), and quantum yields of up to unity.

Decorated BODIPY Fluorophores and Thiol-Reactive Fluorescence Probes by an Aldol Addition

A novel entry to meso-decorated BODIPY motifs on the basis of an unusual aldol-type addition with diethyl ketomalonate is reported. The evolving β-hydroxyl group can be optionally eliminated, which suppresses the fluorescence of the BODIPY core by attachment of a π-electronically coupled methylidene malonate unit. This unit serves as a versatile, highly electrophilic acceptor platform for various nucleophilic additions. Corresponding products benefit from a fully restored fluorescence.

Tuning the Energy Gap by Supramolecular Approaches: Towards Near-Infrared Organic Assemblies and Materials

Near-infrared (NIR) organic materials are of great importance for both fundamental research and practical applications. While much effort has been taken to covalently design and synthesize NIR organic materials with a low energy gap, there are supramolecular approaches for tuning the energy gap to noncovalently fabricate NIR organic assemblies and materials. In this concept article, we summarize and discuss several supramolecular approaches, including the fabrication of charge transfer supramolecular complexes, the fabrication of supramolecular J-aggregates, and the fabrication of supramolecularly stabilized organic radicals. The nature of noncovalent interactions in supramolecular approaches can provide NIR organic assemblies and materials with unique properties such as reversibility, stimuli-responsiveness, recyclability, and adaptive abilities.

Ferrocene catalysed heteroarylation of BODIPy and reaction mechanism studies by EPR and DFT methods

Spin cross-over experiment using EPR and DFT calculations show the radical formation.

Rational design of novel near-infrared fluorescent DCM derivatives and their application in bioimaging

Tailoring the wavelength to NIR emission was realized by replacing the strong electron-withdrawing groups or extending the π-conjugated system based on the DCM chromophore, along with beneficial characteristics such as bright NIR fluorescence, large Stokes shift and low photo-bleaching.

Dual-mode chemodosimetric response of dibromo-BODIPY with anions

Aromatic nucleophilic substitution (Ar-SN) reaction of 3,5-dibromopentafluorophenyl-BODIPY has been explored as a remarkable basis for selective discrimination of anions. The efficient and characteristic ability of anions to modulate the absorption and emission properties of the dye provides an instantaneous distinction through dual-modes. For the first time, a novel platform to achieve dual-modal and promising recognition with discrimination of a series of anions differing in the nucleophilic atoms (F, O, C and N) has been taken into consideration. The behaviour of various anions with dibromo-BODIPY and vivid signal transduction has been fully established with absorption and emission spectroscopy. In addition to this, recognition events have been unambiguously characterized by (1)H, (19)F-NMR and single-crystal XRD.

Gold-catalyzed allene cycloisomerization for pyrrole synthesis: towards highly fluorinated BODIPY dyes

A novel synthetic strategy toward highly fluorinated BODIPY dyes with exceptional photostabilities relying on sustainable gold catalysis has been developed. A key to the tailored pyrrole precursors is the gold catalysis performed in ionic liquids as the reaction medium, allowing a facile recycling of the catalysts. The dyes prepared are well-matching with the spectral windows of popular rhodamine dyes and possess high brightness while showing a distinctly higher photostability than the rhodamines especially in aprotic solvents.

Far-red and near infrared BODIPY dyes: synthesis and applications for fluorescent pH probes and bio-imaging

Far-red and near infrared (NIR) emissive dyes have advantages in the development of fluorescent probes and labelling for bio-imaging in living systems since fluorescence in the long-wavelength region would generate minimum photo-toxicity to biological components, deep tissue penetration and minimal background from auto-fluorescence by bio-molecules. BODIPY dyes are attractive due to their excellent photo-physical properties and potential for fluorescence-based sensing and bio-imaging applications. Thus, numerous research papers have emerged to develop BODIPY-based dyes with absorption and emission in the long-wavelength spectral region (650-900 nm). This review summarizes the general strategies to obtain far-red and NIR BODIPYs. Moreover, their applications for fluorescent pH probes and imaging or labelling in living systems are highlighted.

A BODIPY-based ‘turn-on’ fluorescent probe for hypoxic cell imaging

A ‘turn-on’ fluorescent probe based on the BODIPY fluorophore for hypoxic cell imaging is reported.

Asymmetric core-expanded aza-BODIPY analogues: facile synthesis and optical properties

A novel series of asymmetric core-expanded aza-BODIPY analogues, synthesized through a facile and scalable two-step reaction in high yields, are reported.

Folic acid-functionalized up-conversion nanoparticles: toxicity studies in vivo and in vitro and targeted imaging applications

Folate receptors (FRs) are overexpressed on a variety of human cancer cells and tissues, including cancers of the breast, ovaries, endometrium, and brain. This over-expression of FRs can be used to target folate-linked imaging specifically to FR-expressing tumors. Fluorescence is emerging as a powerful new modality for molecular imaging in both the diagnosis and treatment of disease. Combining innovative molecular biology and chemistry, we prepared three kinds of folate-targeted up-conversion nanoparticles as imaging agents (UCNC-FA: UCNC-Er-FA, UCNC-Tm-FA, and UCNC-Er,Tm-FA). In vivo and in vitro toxicity studies showed that these nanoparticles have both good biocompatibility and low toxicity. Moreover, the up-conversion luminescence imaging indicated that they have good targeting to HeLa cells and can therefore serve as potential fluorescent contrast agents.

Bis-naphthobipyrrolylmethene derived BODIPY complex: an intense near-infrared fluorescent dye

Synthesis of a novel π-extended BODIPY derived from naphthobipyrrole is presented. This dye molecule displays very intense near-infrared (NIR) absorption (ε > 400,000 M(-1) cm(-1)) and emission bands (>700 nm), accompanied by high quantum yield (φf = 0.65) owing to its extended π-conjugation along with imposed structural rigidification.

meso-Ester and carboxylic acid substituted BODIPYs with far-red and near-infrared emission for bioimaging applications

A series of meso-ester-substituted BODIPY derivatives 1-6 are synthesized and characterized. In particular, dyes functionalized with oligo(ethylene glycol) ether styryl or naphthalene vinylene groups at the α positions of the BODIPY core (3-6) become partially soluble in water, and their absorptions and emissions are located in the far-red or near-infrared region. Three synthetic approaches are attempted to access the meso-carboxylic acid (COOH)-substituted BODIPYs 7 and 8 from the meso-ester-substituted BODIPYs. Two feasible synthetic routes are developed successfully, including one short route with only three steps. The meso-COOH-substituted BODIPY 7 is completely soluble in pure water, and its fluorescence maximum reaches around 650 nm with a fluorescence quantum yield of up to 15 %. Time-dependent density functional theory calculations are conducted to understand the structure-optical properties relationship, and it is revealed that the Stokes shift is dependent mainly on the geometric change from the ground state to the first excited singlet state. Furthermore, cell staining tests demonstrate that the meso-ester-substituted BODIPYs (1 and 3-6) and one of the meso-COOH-substituted BODIPYs (8) are very membrane-permeable. These features make these meso-ester- and meso-COOH-substituted BODIPY dyes attractive for bioimaging and biolabeling applications in living cells.

Structural modification strategies for the rational design of red/NIR region BODIPYs

The structure–property relationships of red/NIR region BODIPY dyes is analyzed, so that trends in their photophysical properties can be readily compared.