Antibacterial activities of tellurium nanomaterials

Patent Highlights June-July 2023

A snapshot of noteworthy recent developments in the patent literature of relevance to pharmaceutical and medical research and development.

In situ, synthesis of chitosan fabricated tellurium nanoparticles for improved antimicrobial and anticancer applications

The emergence of antibiotic resistance has had a severe impact on human health and economic burdens, drawing attention to the development of novel antimicrobial therapies. Polymer-metal composites have shown evidence of therapeutic applications by exerting antimicrobial effects and delivering these antimicrobials with biocompatibility. Therefore, this study prepared and characterized chitosan (CS)-fabricated tellurium nanoparticles (Te NPs) for enhanced antimicrobial, antioxidant, and cytotoxicity applications. The CS-Te NPs were spherical, polydisperse, and distributed within the CS matrix with an average size of 37.48 ± 14.56 nm, as confirmed by TEM analysis. CS-Te NPs exhibited positive zeta potential in neutral (pH 7.0: 7.90 ± 1.86 mV) and acidic environment. XRD analysis confirmed the crystalline nature of CS-Te NPs, and these nanoparticles exhibited good thermal and less porosity. A higher release of Te ions occurred from CS-Te NPs at an acidic pH. Further, CS-Te NPs displayed stronger antibacterial and antibiofilm activity against E. coli and S. enterica. Furthermore, CS-Te NPs exhibited significant free radical scavenging activity against ABTS and DPPH free radicals. Moreover, these nanoparticles demonstrated cytotoxicity against cancerous cells (A549 and PC3 cells) when compared to normal cells (NIH3T3 cells). Therefore, this study suggests that CS-Te NPs could serve as a substantial therapeutic agent.

Sunlight mediated removal of toxic pollutants from Yamuna wastewater using efficient nano TeO2-ZnO nanocomposites

We have utilised our TeO2-ZnO nanocomposites for Yamuna wastewater treatment in natural sunlight wherein the sampling site was Nigam Bodh Ghat, Kashmere Gate, Delhi. In BET isotherm, TZ NCs exhibited type IV isotherm forming a H3 like hysteric loop sustaining mesoporous characteristic with an increase in surface area, pore volume and pore diameter of 56.76 m2/g, 0.257 cc/g and 17.18 nm respectively, when compared to pristine ZnO NPs. Yamuna wastewater treatment was carried out using various concentrations of TZ NCs (range 0.1-0.3 g/500 mL) under natural sunlight. Post-treatment, all the physicochemical parameters such as DO, BOD, COD, Nitrates, Ammonia and Phenolic contents were found to be reduced to 10 times bringing Yamuna water parameters within safe limits. Our TZ NCs have shown to have high selectivity for the removal of Chromium from water. Out of all the three concentrations 0.2 g/500 mL or 0.4 mg/mL is the most optimum concentration of TZ NCs for complete Yamuna wastewater treatment. Also, the bacterial culture present in Yamuna water was killed by 90% using TZ having MIC of 0.1 mg/mL. The antibiofilm activity of TZ against K.pneumoniae MTCC 109 was also checked using Congo Red Agar Assay. The presence of heavy metals, their corresponding degradation and leaching studies were analysed using ICP-OES. TZ NCs showed a very minimal leaching rate of Zinc into the water, proving no toxicity associated with these nanocomposites. Further, to observe the safe disposal of TZ NCs into the soil, TZ NCs were utilised for ecotoxicity studies.

Biosynthesis of gallic acid fabricated tellurium nanoparticles (GA-Te NPs) for enhanced antibacterial, antioxidant, and cytotoxicity applications

The development of antibiotic resistance and the onset of diverse forms of cancer necessitate the utilization of innovative multifunctional biocompatible materials. The synthesis of metal and metalloid nanoparticles through eco-friendly means demonstrates promising potential in therapeutic and diagnostic domains. Among these materials, Tellurium (Te) exhibits exceptional characteristics and finds application in numerous fields; nevertheless, its usage in biological applications has been somewhat limited, primarily due to its inherent toxicity. Furthermore, nanomaterials developed from Te have not garnered adequate research attention. Conversely, nanomaterials fashioned using biomolecules augment their biological efficacy and applicability. Therefore, the present work focuses on synthesizing the tellurium nanoparticles (Te NPs) using the antioxidant molecule gallic acid (GA) and evaluating their biological activity and toxicity for the first time. The study evidenced that GA-Te NPs are spherical and monodispersed, with an average size of 19.74 ± 5.3 nm. XRD analysis confirmed a hexagonal crystalline structure for GA-Te NPs, and FTIR analysis evidenced the capping of GA on Te NPs. GA-Te NPs (MIC: 1.56 μg/mL) strongly reduce the growth and biofilm formation of S. aureus, E. coli, and S. enterica. Additionally, GA-Te NPs at a concentration of 50 μg/mL cause a significant level of toxicity in BT474 breast cancer cells but not in NIH3T3 cells. Unexpectedly, GA-Te NPs at concentrations <250 μg/mL do not cause hemolysis in red blood cells (RBC) Besides, the way of utilizing the lower concentrations of therapeutics could result in ecological safety. Therefore, the study concludes that GA-Te NPs could be used as potential multifunctional agents.

In silico evidences of Mpro inhibition by a series of organochalcogen-AZT derivatives and their safety in Caenorhabditis elegans

BACKGROUND

The new coronavirus (SARS-CoV-2) pandemic emerged in 2019 causing millions of deaths. Vaccines were quickly developed and made available in 2021. Despite the availability of vaccines, some subjects refuse to take the immunizing or present comorbities, therefore developing serious cases of COVID-19, which makes necessary the development of antiviral drugs. Previous studies have demonstrated that ebselen, a selenium-containing molecule, can inhibit SARS-CoV-2 Mpro. In addition, selenium is a trace element that has antiviral and anti-inflammatory properties. Zidovudine (AZT) has been widely used against HIV infections and its action against SARS-CoV-2 may be altered by the structural modification with organochalcogen moieties, but this hypothesis still needs to be tested.

METHODS

In the present work we evaluated the Mpro inhibition capacity (in silico), the safety and antioxidant effect of six organochalcogen AZT-derivatives using the free-living nematode Caenorhabditis elegans, through acute (30 min) and chronic (48) exposure protocols.

RESULTS

We observed that the molecules were safe at a concentration range of 1-500 µM and did not alter any toxicological endpoint evaluated. Furthermore, the molecules are capable to decrease the ROS formation stimulated by hydrogen peroxide, to modulate the expression of important antioxidant enzymes such superoxide-dismutase-3 and glutathione S-transferese-4 and to stimulate the translocation of the DAF-16 to the cell nucleus. In addition, the molecules did not deplete thiol groups, which reinforces their safety and contribution to oxidative stress resistance.

CONCLUSIONS

We have found that compounds S116l (a Tellurium AZT-derivative) and S116h (a Selenium-AZT derivative) presented more promising effects both in silico and in vivo, being strong candidates for further in vivo studies.

Assessment of the Health of Soils Contaminated with Ag, Bi, Tl, and Te by the Intensity of Microbiological Activity

Soil health is the basis of ecological and food security for humanity. Among the informative indicators of soil health are microbiological indicators based on the intensity of the carbon dioxide release from the soil. The reaction of the microbial community of Haplic Chernozem Loamic, Haplic Arenosols Eutric, and Haplic Cambisols Eutric to contamination with oxides and nitrates of Ag, Bi, Tl, and Te at doses of 0.5, 1, 3, 10, and 30 derived specific permissible concentrations (SPC) was analyzed in the conditions of a vegetation experiment (the exposure period was 10 days). One derived concentration is assumed to be equal to three background concentrations of the element in the soil. The carbon content of microbial biomass in Haplic Chernozem varied between the experimental options from 6 to 218 mg/kg of soil; in Haplic Arenosols, from 3 to 349 mg/kg of soil; and in Haplic Cambisols, from 7 to 294 mg/kg of soil. Microbial biomass was a more sensitive indicator of contamination by the studied pollutants than basal soil respiration. A decrease in specific microbial respiration was found when Haplic Cambisols were contaminated with Ag, Bi, Te, and Tl oxides. Te and Tl nitrates had a significant toxic effect on each type of soil. At the maximum dose of Tl and Te nitrate, a decrease in basal soil respiration of 56-96% relative to the control and an increase in the metabolic coefficient by 4-6 times was found. The toxicity series of heavy metals averaged for all types of soils in terms of microbiological activity was established: Bi > Ag > Te > Tl (oxides) and Te > Tl > Ag > Bi (nitrates). Nitrates of the elements were more toxic than oxides. Soil toxicity due to Ag, Bi, Tl, and Te contamination was dependent on soil particle size distribution, organic matter content, and soil structure. A series of soil sensitivity to changes in microbial biomass and basal soil respiration when contaminated with the studied pollutants: Haplic Arenosols > Haplic Chernozems > Haplic Cambisols. When diagnosing and assessing the health of soils contaminated with Ag, Bi, Tl, and Te, it is advisable to use indicators of soil microbiological activity.

Screening of AS101 analog, organotellurolate (IV) compound 2 for its in vitro biocompatibility, anticancer, and antibacterial activities

Organotellurium compounds are being well researched as potential candidates for their functional roles in therapeutic and clinical biology. Here, we report the in vitro anticancer and antibacterial activities of an AS101 analog, cyclic zwitterionic organotellurolate (IV) compound 2 [Te^-{CH₂CH(NH₃⁺)COO}(Cl)₃]. Different concentrations of compound 2 were exposed to fibroblast L929 and breast cancer MCF-7 cell lines to study its effect on cell viability. The fibroblast cells with good viability confirmed the biocompatibility, and compound 2 also was less hemolytic on RBCs. A cytotoxic effect on MCF-7 breast cancer cell line investigated compound 2 to be anti-cancerous with IC50 value of 2.86 ± 0.02 µg/mL. The apoptosis was confirmed through the cell cycle phase arrest of the organotellurolate (IV) compound 2. Examination of the antibacterial potency compound 2 was done based on the agar disk diffusion, minimum inhibitory concentration, and time-dependent assay for the Gram-positive Bacillus subtilis and Gram-negative Pseudomonas putida. For both bacterial strains, tests were performed with the concentration range of 3.9-500 μg/mL, and the minimum inhibition concentration value was found to be 125 μg/mL. The time-dependent assay suggested the bactericidal activity of organotellurolate (IV) compound, 2 against the bacterial strains.

Biosynthesis of Novel Tellurium Nanorods by Gayadomonas sp. TNPM15 Isolated from Mangrove Sediments and Assessment of Their Impact on Spore Germination and Ultrastructure of Phytopathogenic Fungi

The biosynthesis of nanoparticles using green technology is emerging as a cost-efficient, eco-friendly and risk-free strategy in nanotechnology. Recently, tellurium nanoparticles (TeNPs) have attracted growing attention due to their unique properties in biomedicine, electronics, and other industrial applications. The current investigation addresses the green synthesis of TeNPs using a newly isolated mangrove-associated bacterium, Gayadomonas sp. TNPM15, and their impact on the phytopathogenic fungi Fusarium oxysporum and Alternaria alternata. The biogenic TeNPs were characterized using transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Raman spectroscopy and Fourier transform infrared (FTIR). The results of TEM revealed the intracellular biosynthesis of rod-shaped nanostructures with a diameter range from 15 to 23 nm and different lengths reaching up to 243 nm. Furthermore, the successful formation of tellurium nanorods was verified by SEM-EDX, and the XRD pattern revealed their crystallinity. In addition, the FTIR spectrum provided evidence for the presence of proteinaceous capping agents. The bioinspired TeNPs exhibited obvious inhibitory effect on the spores of both investigated phytopathogens accomplished with prominent ultrastructure alternations, as evidenced by TEM observations. The biogenic TeNPs impeded spore germination of F. oxysporum and A. alternata completely at 48.1 and 27.6 µg/mL, respectively. Furthermore, an increase in DNA and protein leakage was observed upon exposure of fungal spores to the biogenic TeNPs, indicating the disruption of membrane permeability and integrity. Besides their potent influence on fungal spores, the biogenic TeNPs demonstrated remarkable inhibitory effects on the production of various plant cell wall-degrading enzymes. Moreover, the cytotoxicity investigations revealed the biocompatibility of the as-prepared biogenic TeNPs and their low toxicity against the human skin fibroblast (HSF) cell line. The biogenic TeNPs showed no significant cytotoxic effect towards HSF cells at concentrations up to 80 μg/mL, with a half-maximal inhibitory concentration (IC50) value of 125 μg/mL. The present work spotlights the antifungal potential of the biogenic TeNPs produced by marine bacterium against phytopathogenic fungi as a promising candidate to combat fungal infections.

Studies on the Selective Syntheses of Sodium Ditelluride and Dialkyl Ditellurides

Studies on the selective synthetic method for dialkyl ditellurides 1, a representative class of organyl tellurium compounds, were presented. Considering the difficulty in conducting previous harsh reactions and in suppressing the formation of dialkyl tellurides 2 as side products, we optimized reaction conditions for selective syntheses of sodium ditelluride and the corresponding dialkyl ditellurides 1. We reduced tellurium to sodium ditelluride by using NaBH₄ and subsequently, treated the obtained sodium ditelluride with alkyl halides (RX) to give the target compounds 1. Consequently, by applying various alkyl halides (RX) we achieved the selective syntheses of dialkyl ditellurides 1 (13 examples with 4 new compounds) in modest to good yields. We also suggested the mechanistic pathways to dialkyl ditellurides 1.

Inorganic nanomaterials for intelligent photothermal antibacterial applications

Antibiotics are currently the main therapeutic agent for bacterial infections, but they have led to bacterial resistance, which has become a worldwide problem that needs to be addressed. The emergence of inorganic nanomaterials provides a new opportunity for the prevention and treatment of bacterial infection. With the continuous development of nanoscience, more and more inorganic nanomaterials have been used to treat bacterial infections. However, single inorganic nanoparticles (NPs) are often faced with problems such as large dosage, strong toxic and side effects, poor therapeutic effect and so on, so the combination of inorganic nano-materials and photothermal therapy (PTT) has become a promising treatment. PTT effectively avoids the problem of bacterial drug resistance, and can also reduce the dosage of inorganic nanomaterials to a certain extent, greatly improving the antibacterial effect. In this paper, we summarize several common synthesis methods of inorganic nanomaterials, and discuss the advantages and disadvantages of several typical inorganic nanomaterials which can be used in photothermal treatment of bacterial infection, such as precious metal-based nanomaterials, metal-based nanomaterials and carbon-based nanomaterials. In addition, we also analyze the future development trend of the remaining problems. We hope that these discussions will be helpful to the future research of near-infrared (NIR) photothermal conversion inorganic nanomaterials.

Green synthesis of metalloid nanoparticles and its biological applications: A review

Synthesis of metalloid nanoparticles using biological-based fabrication has become an efficient alternative surpassing the existing physical and chemical approaches because there is a need for developing safer, more reliable, cleaner, and more eco-friendly methods for their preparation. Over the last few years, the biosynthesis of metalloid nanoparticles using biological materials has received increased attention due to its pharmaceutical, biomedical, and environmental applications. Biosynthesis using bacterial, fungal, and plant agents has appeared as a faster developing domain in bio-based nanotechnology globally along with other biological entities, thus posing as an option for conventional physical as well as chemical methods. These agents can efficiently produce environment-friendly nanoparticles with the desired composition, morphology (shape as well as size), and stability, along with homogeneity. Besides this, metalloid nanoparticles possess various applications like antibacterial by damaging bacterial cell membranes, anticancer due to damaging tumour sites, targeted drug delivery, drug testing, and diagnostic roles. This review summarizes the various studies associated with the biosynthesis of metalloid particles, namely, tellurium, arsenic, silicon, boron, and antimony, along with their therapeutic, pharmaceutical and environmental applications.

Synthesis of "Naked" TeO2 Nanoparticles for Biomedical Applications

Chalcogenide nanoparticles have become a very active field of research for their optoelectronic and biological properties. This article shows the production of tellurium dioxide nanoparticles (TeO₂ NPs) by pulsed laser ablation in liquids. The produced nanoparticles were spherical with a diameter of around 70 nm. The energy band gap of those nanoparticles was determined to be around 5.2 eV. Moreover, TeO₂ NPs displayed a dose-dependent antibacterial effect against antibiotic-resistant bacteria such as multidrug-resistant Escherichia coli (MDR E. coli) and methicillin-resistant Staphylococcus aureus (MR S. aureus). The "naked" nature of the nanoparticle surface helped to eradicate the antibiotic-resistant bacteria at a very low concentration, with IC50 values of ∼4.3 ± 0.9 and 3.7 ± 0.2 ppm for MDR E. coli and MR S. aureus, respectively, after just 8 h of culture. Further, the IC50 values of the naked TeO₂ NPs against melanoma (skin cancer) and healthy fibroblasts were 1.6 ± 0.7 and 5.5 ± 0.2 ppm, respectively, for up to 72 h. Finally, to understand these optimal antibacterial and anticancer properties of the TeO₂ NPs, the reactive oxygen species generated by the nanoparticles were measured. In summary, the present in vitro results demonstrate much promise for the presently prepared TeO₂ NPs and they should be studied for a wide range of safe antibacterial and anticancer applications.

Biocompatible tellurium nanoneedles with long-term stable antibacterial activity for accelerated wound healing

Tellurium (Te) nanomaterials (NMs) have emerged as a new antibacterial candidate to respond to the complex global health challenge of bacterial resistance. Herein, Te nanoneedles (NNs) that act both chemically and physically on bacteria are synthesized by a facile method using Na₂TeO₃, urea and glucose. It is found that the prepared Te NNs have a strong affinity to the cell membrane of bacteria and subsequently promote the generation of reactive oxygen species (ROS) in bacteria, resulting in an excellent antibacterial effect toward Staphylococcus aureus (Gram-positive) and Escherichia coli (Gram-negative). What's more, this needle-like morphology also can physically damage the bacterial cell membranes. The Te NNs per se are inert in mammalian cells to produce ROS at a proper concentration, indicating considerable biocompatibility of this material. As a proof-of-concept, the antibacterial Te NNs were used as an anti-inflammatory reagent for promoting bacteria-infected wound healing in vivo, during which Te NNs caused no evident side effects to major organs in mice. Additionally, the antibacterial activity is maintained in the presence of surface oxidation of Te NNs after long-term dispersion in phosphate buffered saline solution. The needle-like Te NMs with long-term antibacterial stability and good biocompatibility have great potential for the treatment of associated infectious diseases.

A review and revisit of nanoparticles for antimicrobial drug delivery

Antimicrobials are widely used to treat bacteria, viruses, fungi, and protozoa. Therefore, research and development of newer types of antimicrobials are important. Antimicrobial resistance has emerged as a major challenge to the healthcare system, although various alternative antimicrobials have been proposed. However, none of these show consistent and comparable efficacy to antimicrobials in clinical trials. More recently, nanoparticles have emerged as a potential solution to antimicrobial agents to overcome antimicrobial resistance. This article revisits and updates applications of various types of nanoparticles for the delivery of antimicrobial agents and their characterization. Though nanoparticle technology has some limitations, it provides an innovative approach to pharmaceutical technology. Furthermore, nanoparticles offer a variety of advantages, such as enhancement of solubility and permeation, leading to better efficacy. In this article, approaches commonly employed to improve antimicrobial therapy are discussed. These approaches have advantages and applications and provide a broader opportunity for pharmaceutical scientists to choose the proper method per the desired outcome.

Te-Cefotaxime Nanocomposites with Restored Antibiotic Susceptibility and LED Light Activated Photothermal Effect for Rapid MRSA Eradication

The ever-growing antibiotic-resistant bacteria pose a huge threat to public health. Restoring the susceptibility of ineffective antibiotics by inorganic nanomaterials and combining of photothermal and antibiotic synergistic therapy could be...

Anti-Pseudomonas aeruginosa biofilm activity of tellurium nanorods biosynthesized by cell lysate of Haloferax alexandrinus GUSF-1(KF796625)

Pseudomonas aeruginosa, an opportunistic human pathogen, is a major health concern as it grows as a biofilm and evades the host's immune defenses. Formation of biofilms on catheter and endotracheal tubes demands the development of biofilm-preventive (anti-biofilm) approaches and evaluation of nanomaterials as alternatives to antibiotics. The present study reports the successful biosynthesis of tellurium nanorods using cell lysate of Haloferax alexandrinus GUSF-1 (KF796625). The black particulate matter had absorption bands at 0.5 and 3.6 keV suggestive of elemental tellurium; showed x-ray diffraction peaks at 2θ values 24.50°, 28.74°, 38.99°, 43.13°, 50.23° and displayed a crystallite size of 36.99 nm. The black nanorods of tellurium were an average size of 40 nm × 7 nm, as observed in transmission electron microscopy. To our knowledge, the use of cell lysate of Haloferax alexandrinus GUSF-1 (KF796625) as a green route for the biosynthesis of tellurium nanorods with a Pseudomonas aeruginosa biofilm inhibiting capacity is novel to haloarchaea. At 50 µg mL^-1, these tellurium nanorods exhibited 75.03% in-vitro reduction of biofilms of Pseudomonas aeruginosa ATCC 9027, comparable to that of ciprofloxacin, which is used in treatment of Pseudomonas infections. Further, the observed ability of these nanoparticles to inhibit the formation of Pseudomonas biofilms is worthy of future research perusal.

Plug-In Safe-by-Design Nanoinorganic Antibacterials

Due to antimicrobial resistance and the adverse health effects that follow broad and inappropriate use of antibacterial agents, new classes of antibacterials with broad and strong bactericidal activity and safety for human use are urgently required globally, increasingly so with the onset of climate change. However, R&D in this field is known to be rarely profitable, unless a cost-effective, flexible, and convenient platform that ensures the production of workable candidate antibacterials can be developed. To address this issue, inorganic nanomaterials have been considered for their bactericidal activities, yet further investigations of composition crystalline modifications and/or surface biomaterial coatings are still required to provide effective and safe antibacterial nanoparticles. In this study, we developed a plug-in system comprising a spark plasma reactor and a flow heater under nitrogen gas flow to supply precursor inorganic nanoparticles (Cu-Te configuration) that can be modulated in-flight at different temperatures. From antibacterial and toxicological assays in both in vitro and in vivo models, bactericidal and toxicological profiles showed that the plug-in system-based platform can be used to identify key parameters for producing safe-by-design agents with antibacterial activity [>88% (in vitro) and >80% (in vivo) in antibacterial efficiency] and safety (>65% in in vitro viability and >60% in in vivo survival rate).

Stability of antibacterial Te(IV) compounds: A combined experimental and computational study

Inorganic Te(IV) compounds are important cysteine protease inhibitors and antimicrobial agents; AS-101 [ammonium trichloro (dioxoethylene-O,O')tellurate] is the first compound of a family with formula NH₄[C₂H₄Cl₃O₂Te], where a Te(IV) centre is bound to a chelate ethylene glycol, and showed several protective therapeutic applications. This compound is lacking in stability performance and is subjected to hydrolysis reaction with displacement of the diol ligand. In this paper, we report the stability trend of a series of analogues complexes of AS-101 with generic formula NH₄[(RC₂H₃O₂)Cl₃Te], where R is an alkyl group with different chain length and different electronic properties, in order to find a correlation between structure and stability in aqueous-physiological conditions. The stability was studied in solution via multinuclear NMR spectroscopy (¹H, ¹³C, ¹²⁵Te) and computationally at the Density Functional Theory level with an explicit micro solvation model. The combined experimental and theoretical work highlights the essential role of the solvating environment and provides mechanistic insights into the complex decomposition reaction. Antimicrobial activity of the compounds was assessed against different bacterial strains.

Synergic antibacterial coatings combining titanium nanocolumns and tellurium nanorods

Nanocolumnar titanium coatings have been fabricated in two sputtering systems with very different characteristics (a laboratory setup and semi-industrial equipment), thus possessing different morphologies (150 nm long columns tilted 20° from the normal and 300 nm long ones tilted 40°, respectively). These coatings exhibit similar antibacterial properties against Gram positive (Staphylococcus aureus) and Gram negative (Escherichia coli) bacteria. When a synergic route is followed and these coatings are functionalized with tellurium (Te) nanorods, the antibacterial properties are enhanced, especially for the long nanocolumns case. The biocompatibility is preserved in all the nanostructured coatings.

Tellurite biotransformation and detoxification by Shewanella baltica with simultaneous synthesis of tellurium nanorods exhibiting photo-catalytic and anti-biofilm activity

Tellurite reducing bacterial strain was isolated from Zuari estuary, Goa India which could tolerate 5.5 mM potassium tellurite with a minimum inhibitory concentration of 6 mM. This strain was designated as GUSDZ9 and was identified as Shewanella baltica (accession number: MF350629) based on 16S rRNA gene sequencing and BLAST analysis. The Diethyl-dithiocarbamate based colorimetric analysis clearly demonstrated a complete reduction of 2 mM tellurite to elemental tellurium during the late stationary phase. Te Nanoparticles (TeNPs) biosynthesis which initiated at early log phase (i.e. 4 h) was evidently monitored through colour change and a peak due to surface plasmon resonance at 210 nm using UV-Vis spectroscopic analysis. X-ray crystallographic studies and transmission electron microscopy revealed unique nano-rods with a diameter ranging from 8 to 75 nm. Energy dispersive X-ray analysis further confirmed the presence of pure tellurium. The biogenic TeNPs at 10 and 5 µg/mL evidently demonstrated 90% degradation of methylene blue dye and anti-biofilm activity against potential Gram-positive and Gram-negative human pathogens respectively. The alkaline comet assay revealed time and dose-dependent genotoxicity at concentrations higher than 15 µg/mL of TeNPs. This study clearly demonstrated the potential of Shewanella baltica strain GUSDZ9 in bioremediation of toxic tellurite through bio-reduction into elemental tellurium and involvement of biogenic TeNPs in the photo-catalytic reduction of methylene blue and anti-biofilm activity. This is the first report of its kind on the synthesis of biogenic TeNPs from Shewanella baltica demonstrating photo-catalytic, anti-biofilm activity as well as genotoxicity.

Synthesis and Antibacterial Activity of Metal(loid) Nanostructures by Environmental Multi-Metal(loid) Resistant Bacteria and Metal(loid)-Reducing Flavoproteins

Microbes are suitable candidates to recover and decontaminate different environments from soluble metal ions, either via reduction or precipitation to generate insoluble, non-toxic derivatives. In general, microorganisms reduce toxic metal ions generating nanostructures (NS), which display great applicability in biotechnological processes. Since the molecular bases of bacterial reduction are still unknown, the search for new -environmentally safe and less expensive- methods to synthesize NS have made biological systems attractive candidates. Here, 47 microorganisms isolated from a number of environmental samples were analyzed for their tolerance or sensitivity to 19 metal(loid)s. Ten of them were highly tolerant to some of them and were assessed for their ability to reduce these toxicants in vitro. All isolates were analyzed by 16S rRNA gene sequencing, fatty acids composition, biochemical tests and electron microscopy. Results showed that they belong to the Enterobacter, Staphylococcus, Acinetobacter, and Exiguobacterium genera. Most strains displayed metal(loid)-reducing activity using either NADH or NADPH as cofactor. While Acinetobacter schindleri showed the highest tellurite ( TeO32- ) and tetrachloro aurate ( AuCl4- ) reducing activity, Staphylococcus sciuri and Exiguobacterium acetylicum exhibited selenite ( SeO32- ) and silver (Ag⁺) reducing activity, respectively. Based on these results, we used these bacteria to synthetize, in vivo and in vitro Te, Se, Au, and Ag-containing nanostructures. On the other hand, we also used purified E. cloacae glutathione reductase to synthesize in vitro Te-, Ag-, and Se-containing NS, whose morphology, size, composition, and chemical composition were evaluated. Finally, we assessed the putative anti-bacterial activity exhibited by the in vitro synthesized NS: Te-containing NS were more effective than Au-NS in inhibiting Escherichia coli and Listeria monocytogenes growth. Aerobically synthesized TeNS using MF09 crude extracts showed MICs of 45- and 66- μg/ml for E. coli and L. monocytogenes, respectively. Similar MIC values (40 and 82 μg/ml, respectively) were observed for TeNS generated using crude extracts from gorA-overexpressing E. coli. In turn, AuNS MICs for E. coli and L. monocytogenes were 64- and 68- μg/ml, respectively.

Antimicrobial and Antioxidant Activity of the Biologically Synthesized Tellurium Nanorods; A Preliminary In vitro Study

Background: Recent theranostic (therapeutic or diagnostic) applications of tellurium nanoparticles have attracted a great interest for development of different methods for synthesis of this valuable nanostructure, especially via biological resources. Objectives: In the present study, the antimicrobial and antioxidant effects of the tellurium nanorods (Te NRs) biosynthesized by a bacterial strain Pseudomonas pseudoalcaligenes strain Te were evaluated. Materials and Methods: The antimicrobial effect of Te NRs and potassium tellurite against different bacterial and fungal pathogens was assessed by microdilution method. Furthermore, the disk diffusion method was used to evaluate the antibacterial effect of the biogenic Te NRs and potassium tellurite against methicillin-resistant Staphylococcus aureus, alone or in combination with various antibiotics. Also, the biogenic Te NRs were investigated for antioxidant activity using 2, 2-diphenyl- 1-picrylhydrazyl (DPPH) scavenging activity and reducing power assay. Results: Transmission electron micrograph (TEM) of the purified Te NRs showed individual and rod-shaped nanostructure (~22 nm diameter by 185 nm in length). Based on the data obtained from both microdilution and disk diffusion method the K₂ TeO₃ exhibited a higher antibacterial and antifungal activity compared to the Te NRs. The measured IC₅₀ for the biogenic Te NRs (i.e. DPPH radical scavenging activity) was found to be 24.9 μg.mL^-1, while, K ₂ TeO₃ has represented only 17.6 ± 0.8 % DPPH radical scavenging effect at the concentration of 160 μg.mL^-1. The reducing power assay revealed a higher electron-donating activity for Te NRs compared to K₂TeO₃. Conclusions: Based on the data obtained from both microdilution and disk diffusion method the K₂TeO₃ exhibited a higher antimicrobial and antifungal activity than Te NRs. Te NRs didn't show the antibacterial effect against the tested bacterial strain: MRSA and showed an inhibitory effect and antibacterial activity of the effective antibiotics. However, more studies should be performed to explore the action mechanism of the produced biogenic Te NRs.

Tracing Tellurium and Its Nanostructures in Biology

Tellurium (Te) is a semimetal rare element in nature. Together with oxygen, sulfur (S), and selenium (Se), Te is considered a member of chalcogen group. Over recent decades, Te applications continued to emerge in different fields including metallurgy, glass industry, electronics, and applied chemical industries. Along these lines, Te has recently attracted research attention in various fields. Though Te exists in biologic organisms such as microbes, yeast, and human body, its importance and role and some of its potential implications have long been ignored. Some promising applications of Te using its inorganic and organic derivatives including novel Te nanostructures are being introduced. Before discovery and straightforward availability of antibiotics, Te had considered and had been used as an antibacterial element. Antilishmaniasis, antiinflammatory, antiatherosclerotic, and immuno-modulating properties of Te have been described for many years, while the innovative applications of Te have started to emerge along with nanotechnological advances over the recent years. Te quantum dots (QDs) and related nanostructures have proposed novel applications in the biological detection systems such as biosensors. In addition, Te nanostructures are used in labeling, imaging, and targeted drug delivery systems and are tested for antibacterial or antifungal properties. In addition, Te nanoparticles show novel lipid-lowering, antioxidant, and free radical scavenging properties. This review presents an overview on the novel forms of Te, their potential applications, as well as related toxicity profiles.

Flavoprotein-Mediated Tellurite Reduction: Structural Basis and Applications to the Synthesis of Tellurium-Containing Nanostructures

The tellurium oxyanion tellurite (TeO₃^2-) is extremely harmful for most organisms. It has been suggested that a potential bacterial tellurite resistance mechanism would consist of an enzymatic, NAD(P)H-dependent, reduction to the less toxic form elemental tellurium (Te⁰). To date, a number of enzymes such as catalase, type II NADH dehydrogenase and terminal oxidases from the electron transport chain, nitrate reductases, and dihydrolipoamide dehydrogenase (E3), among others, have been shown to display tellurite-reducing activity. This activity is generically referred to as tellurite reductase (TR). Bioinformatic data resting on some of the abovementioned enzymes enabled the identification of common structures involved in tellurite reduction including vicinal catalytic cysteine residues and the FAD/NAD(P)⁺-binding domain, which is characteristic of some flavoproteins. Along this line, thioredoxin reductase (TrxB), alkyl hydroperoxide reductase (AhpF), glutathione reductase (GorA), mercuric reductase (MerA), NADH: flavorubredoxin reductase (NorW), dihydrolipoamide dehydrogenase, and the putative oxidoreductase YkgC from Escherichia coli or environmental bacteria were purified and assessed for TR activity. All of them displayed in vitro TR activity at the expense of NADH or NADPH oxidation. In general, optimal reducing conditions occurred around pH 9–10 and 37°C. Enzymes exhibiting strong TR activity produced Te-containing nanostructures (TeNS). While GorA and AhpF generated TeNS of 75 nm average diameter, E3 and YkgC produced larger structures (>100 nm). Electron-dense structures were observed in cells over-expressing genes encoding TrxB, GorA, and YkgC.

N-Heterocyclic molecule-capped gold nanoparticles as effective antibiotics against multi-drug resistant bacteria

We demonstrate that N-heterocyclic molecule-capped gold nanoparticles (Au NPs) have broad-spectrum antibacterial activity. Optimized antibacterial activity can be achieved by using different initial molar ratios (1 : 1 and 10 : 1) of N-heterocyclic prodrugs and the precursor of Au NPs (HAuCl4). This work opens up new avenues for antibiotics based on Au NPs.

Fabrication of Te and Te-Au Nanowires-Based Carbon Fiber Fabrics for Antibacterial Applications

Pathogenic bacteria that give rise to diseases every year remain a major health concern. In recent years, tellurium-based nanomaterials have been approved as new and efficient antibacterial agents. In this paper, we developed the approach to directly grow tellurium nanowires (Te NWs) onto commercial carbon fiber fabrics and demonstrated their antibacterial activity. Those Te NWs can serve as templates and reducing agents for gold nanoparticles (Au NPs) to deposit. Three different Te-Au NWs with varied concentration of Au NPs were synthesized and showed superior antibacterial activity and biocompability. These results indicate that the as-prepared carbon fiber fabrics with Te and Te-Au NWs can become antimicrobial clothing products in the near future.

Structural and Photoconductivity Properties of Tellurium/PMMA Films

Owing to the very brittle nature of tellurium powder, nanoscopic grains with an average size of 4.8 ± 0.8 nm were produced by dry vibration milling technique using a mixer/mill apparatus. A novel material was obtained by binding the nanosized tellurium grains with poly(methyl methacrylate) (PMMA) polymer. The morphology, elemental composition, and structural and optical properties of Te/PMMA films were investigated. The prepared material was composed of hexagonal tellurium and α-phase of tellurium oxide. The electrical properties of the films were studied, for different electrode contact configurations, in dark condition and under white light illumination varying the optical power density from 2 to 170 mW/cm(2) and turning the light on and off cyclically. Data analysis shows that the photoconductivity of the film with sandwich contact configuration is a linear function of the light power density and increases more than 2 orders of magnitude as compared to the photoresponse of the film with coplanar contact configuration.

Anti-bacterial TeNPs biosynthesized by haloarcheaon Halococcus salifodinae BK3

Microbial synthesis of highly structured metal sulfide and metallic nanoparticles is a benign approach of nanomaterial synthesis. Various microbes have been exploited for nanoparticle synthesis, but nanofabrication using haloarchaea is still in nascent stages. Here, we report the intracellular synthesis of hexagonal needle-shaped tellurium nanoparticles with an aspect ratio of 1:4.4, by the haloarcheon Halococcus salifodinae BK3. The isolate was able to tolerate up to 5.5 mM K2TeO3. The yield of tellurium nanoparticles was highest when the culture was exposed to 3 mM K2TeO3, even though the isolate exhibited slightly decreased growth rate as compared to the culture growing in the absence of K2TeO3. The enzyme tellurite reductase was responsible for tellurite resistance and nanoparticle synthesis in H. salifodinae BK3. These tellurium nanoparticles exhibited anti-bacterial activities against both Gram-positive and Gram-negative bacteria, with higher antibacterial activity towards Gram-negative bacteria. This is the first report on the synthesis of tellurium nanoparticles by Halophilic archaea.

Glutathione reductase-mediated synthesis of tellurium-containing nanostructures exhibiting antibacterial properties

Tellurium, a metalloid belonging to group 16 of the periodic table, displays very interesting physical and chemical properties and lately has attracted significant attention for its use in nanotechnology. In this context, the use of microorganisms for synthesizing nanostructures emerges as an eco-friendly and exciting approach compared to their chemical synthesis. To generate Te-containing nanostructures, bacteria enzymatically reduce tellurite to elemental tellurium. In this work, using a classic biochemical approach, we looked for a novel tellurite reductase from the Antarctic bacterium Pseudomonas sp. strain BNF22 and used it to generate tellurium-containing nanostructures. A new tellurite reductase was identified as glutathione reductase, which was subsequently overproduced in Escherichia coli. The characterization of this enzyme showed that it is an NADPH-dependent tellurite reductase, with optimum reducing activity at 30°C and pH 9.0. Finally, the enzyme was able to generate Te-containing nanostructures, about 68 nm in size, which exhibit interesting antibacterial properties against E. coli, with no apparent cytotoxicity against eukaryotic cells.

Synthesis and antimicrobial activity of gold/silver-tellurium nanostructures

Gold-tellurium nanostructures (Au-Te NSs), silver-tellurium nanostructures (Ag-Te NSs), and gold/silver-tellurium nanostructures (Au/Ag-Te NSs) have been prepared through galvanic reactions of tellurium nanotubes (Te NTs) with Au(3+), Ag(+), and both ions, respectively. Unlike the use of less environmentally friendly hydrazine, fructose as a reducing agent has been used to prepare Te NTs from TeO2 powders under alkaline conditions. The Au/Ag-Te NSs have highly catlaytic activity to convert nonfluorescent Amplex Red to form fluorescent product, revealing their great strength of generating reactive oxygen species (ROS). Au/Ag-Te NSs relative to the other two NSs exhibit greater antimicrobial activity toward the growth of E. coli, S. enteritidis, and S. aureus; the minimal inhibitory concentration (MIC) values of Au/Ag-Te NSs were much lower (>10-fold) than that of Ag-Te NSs and Au-Te NSs. The antibacterial activity of Au/Ag-Te NSs is mainly due to the release of Ag(+) ions and Te-related ions and also may be due to the generated ROS which destroys the bacteria membrane. In vitro cytotoxicity and hemolysis analyses have revealed their low toxicity in selected human cell lines and insignificant hemolysis in red blood cells. In addition, inhibition zone measurements using a Au/Ag-Te NSs-loaded konjac jelly film have suggested that it has great potential in practial application such as wound dressing for reducing bacterial wound infection. Having great antibacterial activitiy and excellent biocompatibility, the low-cost Au/Ag-Te NSs hold great potential as effective antimicrobial drugs.

Biogenic tellurium nanorods as a novel antivirulence agent inhibiting pyoverdine production in Pseudomonas aeruginosa

While antibiotic resistance in bacteria is rapidly increasing, the development of new antibiotics has decreased in recent years. Antivirulence drugs disarming rather than killing pathogens have been proposed to alleviate the problem of resistance inherent to existing biocidal antibiotics. Here, we report a nontoxic biogenic nanomaterial as a novel antivirulence agent to combat bacterial infections caused by Pseudomonas aeruginosa. We synthesized, in an environmentally benign fashion, tellurium nanorods (TeNRs) using the metal-reducing bacterium Shewanella oneidensis, and found that the biogenic TeNRs could effectively inhibit the production of pyoverdine, one of the most important virulence factors in P. aeruginosa. Our results suggest that amyloids and extracellular polysaccharides Pel and Psl are not involved in the interactions between P. aeruginosa and the biogenic TeNRs, while flagellar movement plays an important role in the cell-TeNRs interaction. We further showed that the TeNRs (up to 100 µg/mL) did not exhibit cytotoxicity to human bronchial epithelial cells and murine macrophages. Thus, biogenic TeNRs hold promise as a novel antivirulence agent against P. aeruginosa.

Multiple strategies to activate gold nanoparticles as antibiotics

Widespread antibiotic resistance calls for new strategies. Nanotechnology provides a chance to overcome antibiotic resistance by multiple antibiotic mechanisms. This paper reviews the progress in activating gold nanoparticles with nonantibiotic or antibiotic molecules to combat bacterial resistance, analyzes the gap between experimental achievements and real clinical application, and suggests some potential directions in developing antibacterial nanodrugs.

Laser-assisted growth of t-Te nanotubes and their controlled photo-induced unzipping to ultrathin core-Te/sheath-TeO(2) nanowires

One dimensional (1D) nanostructures of semiconducting oxides and elemental chalcogens culminate over the last decade in nanotechnology owing to their unique properties exploitable in several applications sectors. Whereas several synthetic strategies have been established for rational design of 1D materials using solution chemistry and high temperature evaporation methods, much less attention has been given to the laser-assisted growth of hybrid nanostructures. Here, we present a laser-assisted method for the controlled fabrication of Te nanotubes. A series of light-driven phase transition is employed to controllably transform Te nanotubes to core-Te/sheath-TeO₂ and/or even neat TeO₂ nanowires. This solid-state laser-processing of semiconducting materials apart from offering new opportunities for the fast and spatially controlled fabrication of anisotropic nanostructures, provides a means of simultaneous growing and integrating these nanostructures into an optoelectronic or photonic device.