Organic-Inorganic Hybrids Based on Ultrathin Oxide Layers: Designed Nanostructures for Molecular Recognition

Designed functions of oxide/hydroxide nanosheets via elemental replacement/doping

Partial replacement of one structural element in a solid with another of a similar size was conducted to impart functionality to the solids and modify their properties. This phenomenon is found in nature in coloured gemstones and clay minerals and is used in materials chemistry and physics, endowing materials with useful properties that can be controlled by incorporated heteroelements and their amounts. Depending on the area of research (or expected functions), the replacement is referred to as "isomorphous substitution", "doping", etc. Herein, elemental replacement in two-dimensional (2D) oxides and hydroxides (nanosheets or layered materials) is summarised with emphasis on the uniqueness of their preparation, characterisation and application compared with those of the corresponding bulk materials. Among the 2D materials (graphene, metallenes, transition metal chalcogenides, metal phosphate/phosphonates, MXenes, etc.), 2D oxides and hydroxides are characterised by their presence in nature, facile synthesis and storage under ambient conditions, and possible structural variation from atomic-level nanosheets to thicker nanosheets composed of multilayered structures. The heteroelements to be doped were selected depending on the target application objectively; however, there are structural and synthetic limitations in the doping of heteroelements. In the case of layered double hydroxides (single layer) and layered alkali silicates (from single layer to multiple layers), including layered clay minerals (2 : 1 layer), the replacement (commonly called isomorphous substitution) is discussed to understand/design characteristics such as catalytic, adsorptive (including ion exchange), and swelling properties. Due to the variation in their main components, the design of layered transition metal oxide/hydroxide materials via isomorphous substitution is more versatile; in this case, tuning their band structure, doping both holes and electrons, and creating impurity levels are examined by the elemental replacement of the main components. As typical examples, material design for the photocatalytic function of an ion-exchangeable layered titanate (lepidocrocite-type titanate) and a perovskite niobate (KCa2Nb3O10) is discussed, where elemental replacement is effective in designing their multiple functions.

Layered Silicates Exhibiting MOF-Like Gate-Opening Behaviors in Liquid-Phase Adsorptions: Experimental and Theoretical Investigations

Layered silicates, including clay minerals, can be used as liquid-phase adsorbents in many important applications. However, because their two-dimensional interlayer space is narrow and not entirely opened due to the presence of interlayer species, guest species are forced to penetrate while expanding the interlayer space, which limits their adsorption performances compared with microporous materials such as MOFs and zeolites. Herein, as reported for the adsorption of gaseous species on flexible MOFs, we report a layered silicate that exhibits gate-opening adsorption in liquid phases. This layered silicate, synthesized via dilute acid treatment of the parent sodium-type, exhibits an abrupt increase in the basal spacing (layer thickness + interlayer space) to reach a plateau even at an earlier stage of benzoic acid adsorption from acetonitrile, whereas a typical layered silicate, magadiite, exhibits a gradual increase in the basal spacing as adsorption progress under identical conditions. The layered silicate shows an excellent adsorption capacity and rate for benzoic acid uptake from acetonitrile, which is considerably higher than that of magadiite. With comprehensive adsorption tests using different adsorbates and solvents, we propose that the layered silicate has zeolite-like but distorted, flexible open microchannels within each layer, and the intralayer microchannels can effectively and rapidly accommodate the solvent (acetonitrile) molecules, which are capable of expanding the framework to initiate the adsorption of aromatic compounds. The density function theory calculation revealed the adsorption mechanism, where the layered silicate accommodates acetonitrile in the intralayer microchannel followed by the interlayer space, and the former selectively plays a role as the adsorption site of aromatic compounds via exchange with acetonitrile.

Fluorescence enhancement of benzimidazolium derivative on clay nanosheets by surface-fixation induced emission (S-FIE)

The photophysical behaviors of benzimidazolium derivative [4-(1,3-dimethylbenzimidazol-3-imu-2-yl)-N, N-diphenylaniline (2-(4-(diphenylamino)phenyl)-1,3-dimethyl-1H-benzo[d]imidazol-3-ium)] (BID) in water, organic solvents and on synthetic saponite were investigated. The fluorescence quantum yield (Φf) of BID was 0.91 on the saponite surface under the optimal condition, while that in water was 0.010. Such fluorescence enhancement on the inorganic surface is called "surface-fixation induced emission (S-FIE)". This fluorescence enhancement ratio for BID is significantly high compared to that of conventional S-FIE active dyes. From the values of Φf and the excited lifetime, the non-radiative deactivation rate constant (knr) and radiative deactivation rate constant (kf) of BID on the saponite surface and in water were determined. Results showed that the factors for fluorescence enhancement were both the increase of kf and the decrease of knr on the saponite surface; especially, knr decreased by more than two orders due to the effect of nanosheets.

Monolayer Modification of Spherical Amorphous Silica by Clay Nanosheets

Clay-silica nanocomposite materials (CSiN) were prepared by an electrostatic interaction between negatively charged clay nanosheets and positively charged spherical silica, which was modified with an alkyl ammonium group by silane coupling. By optimization of the preparation conditions, 84% coverage of the silica surface by the clay nanosheets was achieved. Adsorption experiments using cationic porphyrin dyes on the CSiN revealed that the clay nanosheet covers the spherical silica as a single layer and does not detach from the silica surface under aqueous conditions. In addition, it turned out that the cationic porphyrin dye did not penetrate the space between the silica surface and the clay nanosheet. Porphyrin molecules were adsorbed only at the outer surface of the clay nanosheet without molecular aggregation even under the high-density adsorption conditions. By combining spherical silica and clay nanosheets, it is possible to prepare novel hybrid materials where the surface can act as a unique adsorption field for dyes.

Novel Floating Adsorbent for Water Treatment: Organically Modified Layered Alkali Silicate by Facile Mechanochemical Reaction

Adsorption serves as an effective way to collect (remove) contaminants from aqueous solution. In the present study, a novel floating adsorbent was designed through surface modification of a layered alkali silicate (octosilicate) using a silane coupling reagent (chlorodimethyl[3-(2,3,4,5,6-pentafluorophenyl)propyl]silane) to collect metal ions from water. By conducting the grafting by solvent-free mechanochemical reaction at room temperature, the external surface of octosilicate was modified to be hydrophobic while preserving the ion exchange capability in the interlayer space. Characterizations of XRD, IR, SEM, TGA, 29Si MAS NMR, and 19F MAS NMR confirmed the successful grafting at the external surface of octosilicate particles. The modified silicate demonstrated buoyancy at the air-water interface, facilitating the concentration of methylene blue, Ni2+, and Pb2+ from aqueous solutions. The adsorbed amounts of metal ions on the floating adsorbent were greater than those reported for the common nonfloating adsorbents (zeolites, clays, and clay minerals).

Estimation of Adsorbed Amounts in Organoclay by Machine Learning

Adsorption properties of organoclay have been investigated for decades focusing on the morphology and physicochemical properties of two-dimensional interlayers. Experimental studies have previously revealed that the adsorption mechanisms depend on the molecular species of the organocation and adsorbate, making it difficult to estimate the adsorbed amount without experiments. Considering that the adsorption of aromatic compounds has been reported by using various clays, organocations, and adsorbates, machine learning is a promising method to overcome the difficulty. In the present study, we collected adsorption data from the literature and constructed models to estimate the adsorbed amount of the organoclay by random forest regression. The composition of the clay, molecular descriptors of the organocation and adsorbate obtained by the RDKit, and experimental conditions were used as the explanatory variables. Simple model construction by using all the experimental data resulted in low R ² and a mean absolute error. This problem was solved by the correction of the adsorbed amount data by the Langmuir or Freundlich equation and the following model construction at various equilibrium concentrations. The plots of the adsorbed amount estimated by the latter model were located close to the corresponding adsorption isotherm, while that by the former was not. Thus, it was revealed that the adsorbed amount was estimated quantitatively without understanding the adsorption mechanisms individually. Feature importance analysis also revealed that the combination of the organocation and adsorbate is important at high equilibrium concentrations, while the clay should be selected carefully as the concentration gets lower. Our results give an insight into the rational design of the organoclay including the synthesis and adsorption properties.

Mixed-Metal-Atom Markers Enable Simultaneous Imaging of Spatial Distribution in Two-Dimensional Heterogeneous Molecular Assembly by Scanning Transmission Electron Microscopy

Atomic-scale observation by aberration-corrected scanning transmission electron microscopy (STEM) is essential for characterizing supramolecular assemblies with nonperiodic structures. Identifying the relative spatial arrangement in a mixture of molecular species in an assembly is crucial for understanding chemical reaction systems occurring in the assembly. Herein, we report the first direct observation of supramolecular assemblies comprising anionic clay mineral nanosheets and two types of cationic porphyrin complexes with Pt and Pd atom markers by annular dark-field STEM, enabling the simultaneous imaging of well-mixed spatial molecular distributions. The results expand the possibility of applying electron microscopy to self-assembly structures constructed via weak supramolecular interactions on relatively thick nanosheet materials and on one- to few-atom-thick graphene analogues, which will provide important guidelines for future material design.

Acceleration of the Dehydrogenation of d-Glucose to 2-Keto-d-gluconate in Aqueous Amino Acid via Hydrated Stacked Clay Nanosheets

The assembly of discrete active species to form periodical nanostructures is essential in realizing low-cost artificial enzymes that mimic natural enzymatic functions in extraordinary bio(chemo)selective reactions. In this study, we developed artificial bifunctional glucose/gluconic acid dehydrogenase from naturally abundant resources: l-aspartic acid (Asp) and montmorillonite (a subgroup of smectite natural clay minerals). β-d-Glucose (Glc) was dehydrogenated to 2-keto-d-gluconate (2-KGA) at 25 and 30 °C in an aqueous acidic solution (pH = 3, 4, and 5). The reaction involved sequential steps that yielded d-gluconic acid (GA) as an intermediate. The second step of the dehydrogenation (GA to 2-KGA) occurred at a higher rate than the first (Glc to GA), which is comparable to the natural process. A negatively charged carboxylate in Asp was required for the dehydrogenation, which donates an electron pair (COO:^-) to the hydroxyl group bonded to the C(1)-position of Glc. The acidic sites in clay served as coenzymatic sites (electron acceptor), promoting the Glc dehydrogenation as the Glc reduced by Asp approached the clay coenzymatic sites. The active coenzymatic structures were developed in 48 h (induction period) through the rearrangement of the adsorbed Asp and Glc molecules on montmorillonite in water (intermediate structure). The spontaneous assembling of the intermediate structures facilitated the one-pot dehydrogenation of Glc to 2-KGA via periodic "hydrated stacked layers" comprising clay nanosheets, Asp, and Glc. The facile synthetic route proposed here is inexpensive and would be beneficial without using both GDH and GADH enzymes bound to a cell membrane.

Interlayer Modification of a Layered Silicate RUB-18 with 4-Phosphonophenylsilane and Its Surface Acidic Functions

The interlayer silylation of a layered silicate H-RUB-18 (Si₄O₇(OH)₂) using a new aromatic silylating reagent containing a phosphonic acid group (4-phosphonophenylsilane: PPS) was demonstrated (H-PPS-RUB-18). The phosphonic acid groups were attached to the silicate layers through the reaction of H-RUB-18 with (4-diethoxyphosphorylphenyl)-triethoxysilane (p-PPS-E), and the ester moieties were subsequently hydrolyzed with hydrochloric acid. H-PPS-RUB-18 is a solid acid, as indicated by the intercalation of various alkylamines and the catalytic acetalization of ketones. A systematic increase in interlayer spacing leading to surface acidic properties was obtained through intercalation with a series of alkylamines. In addition, H-PPS-RUB-18 was exfoliated, resulting in single-layer nanosheets with ca. 2.0 nm thickness. The catalytic acetalization of ketones was related to the interlayer spacing of the modified RUB-18.

Organophilic Clay with Useful Whiteness

An organophilic clay was obtained by the intercalation of dioctadecyldimethylammonium ions into the interlayer space of a purified bentonite. The organophilic clay was characterized by its excellent whiteness, which originated from the used purified bentonite with a low content of colored impurities, suitable for its practical application in paints, cosmetics, polymer additives, etc. The dioctadecyldimethylammonium-bentonite clay was applied as a support to accommodate polyaromatic molecules to afford luminescent hybrids with high luminescence efficiency, showing its usefulness as a component of photofunctional hybrid materials.

Dissecting Biological and Synthetic Soft-Hard Interfaces for Tissue-Like Systems

Soft and hard materials at interfaces exhibit mismatched behaviors, such as mismatched chemical or biochemical reactivity, mechanical response, and environmental adaptability. Leveraging or mitigating these differences can yield interfacial processes difficult to achieve, or inapplicable, in pure soft or pure hard phases. Exploration of interfacial mismatches and their associated (bio)chemical, mechanical, or other physical processes may yield numerous opportunities in both fundamental studies and applications, in a manner similar to that of semiconductor heterojunctions and their contribution to solid-state physics and the semiconductor industry over the past few decades. In this review, we explore the fundamental chemical roles and principles involved in designing these interfaces, such as the (bio)chemical evolution of adaptive or buffer zones. We discuss the spectroscopic, microscopic, (bio)chemical, and computational tools required to uncover the chemical processes in these confined or hidden soft-hard interfaces. We propose a soft-hard interaction framework and use it to discuss soft-hard interfacial processes in multiple systems and across several spatiotemporal scales, focusing on tissue-like materials and devices. We end this review by proposing several new scientific and engineering approaches to leveraging the soft-hard interfacial processes involved in biointerfacing composites and exploring new applications for these composites.

Important Roles of Water Clusters Confined in a Nanospace as Revealed by a Synchrotron X-ray Diffraction Study

States of water molecules confined in a nanospace designed by montmorillonite (negatively charged silicate layer) and charge compensating benzylammonium were investigated. Caffeine was used as a probe because of its compatibility for the fine structure of the interlayer water. Powder synchrotron radiation X-ray diffraction (SXRD) and adsorption isotherms of the water vapor revealed a metastable structure of bimolecular water layers (2WLs) in the interlayer space. Water molecules readily penetrated to expand the interlayer space to 0.56 nm. The interlayer space did not increase further even in the presence of excess water. According to the isosteric heat of water, the expansion was limited because of moderate hydration as forming 2WLs. Caffeine molecules replaced a part of the water molecules in the 2WLs to expand the interlayer space to 0.65 nm. Time-resolved SXRD with an accumulation time of 500 ms revealed that the interlayer expansion reached a steady state within a few minutes. The caffeine intercalation proceeded, involving a change in the molecular orientation that increased the contact area of the caffeine molecules. The interlayer expansion was limited in all the solvents examined (mixtures of water with methanol, ethanol, acetone, and tetrahydrofuran), while the packing density of the incorporated caffeine was maximized in the absence of an organic solvent. The water molecules confined in the interlayer space acted as an actuator to accommodate a large quantity of amphiphilic molecules by adapting the nanostructure, which was achieved by releasing the confined water molecules.

Highly Luminescent Inorganic-Organic Hybrids with Molecularly Dispersed Perylene

A highly photoluminescent material was obtained by the incorporation of perylene into an inorganic-organic hybrid film. Octosilicate, a layered alkali silicate, was modified with a cationic surfactant, dioleyldimethylammonium ion, to accommodate perylene molecularly and uniformly. The perylene-doped dioleyldimethylammonium octosilicate films were fabricated by simply casting the toluene solution of perylene with dispersed dioleyldimethylammonium octosilicate on substrates. Near-unity photoluminescence quantum efficiency was achieved for hybrids containing a high concentration of perylene.

Photoluminescence Gas Sensing by Fluorescein-Dye Anions/1-Butanesulfonate/Layered Double Hydroxide Hybrid Materials under Humid Environment Conditions

In this study, we investigated the photoluminous spectroscopic behavior of hybrid powder incorporating both anionic fluorescein dye (AFD) and 1-butanesulfonate (C4S) with layered double hydroxide (LDH) in the presence of NH₃ or NO₂ gas under various relative humidity conditions. In the presence of NH₃ gas, drastic photoluminescence enhancement from the LDH/AFD/C4S hybrid was observed at relative humidity (RH) ≥ 40% when the NH₃ reached a certain concentration. Meanwhile, the LDH/AFD/C4S hybrid was exposed to NO₂ gas at various relative humidity conditions, and the following behavior was observed: At RH ≥ 60%, the photoluminescence (PL) intensity from the hybrid gradually decreased as NO₂ concentration increased. Therefore, the LDH/AFD/C4S hybrid investigated in this study is inferred to be suitable for optical NH₃/NO₂ sensor devices, which can be used in humid air.

Designing nanoarchitecture for environmental remediation based on the clay minerals as building block

Nanoarchitecture of hybrids materials based on clay minerals as nano building blocks for the environmental remediation is summarized with the emphasis on the utilization of layered clay minerals, especially smectite group of clay minerals, as nano building blocks for designing functional nanostructures for the adsorption of molecular contaminants from the environments. Smectites are well-known adsorbents of cationic contaminants, while surface modification of smectites with organoammonium ions has given hydrophobic and microporous characters to uptake nonionic organic contaminants from environments. Not only on the designed interactions between adsorbent-adsorbate for efficient and higher capacity adsorption, the states of the adsorbed nonionic organic compounds have been altered and varied by the modification of smectites as shown by the controlled release and specific catalytic reactions. The organically modified clays are classified from the nanoarchitecture, and the functions derived from the nanoarchitectures are discussed based on the structure-property relationship.

Electronic interactions between a quaternary pyridyl-β-diketonate and anionic clay nanosheets facilitate intense photoluminescence

Electrostatic interactions between a quaternary pyridyl-β-diketonate and anionic charged nanosheets were observed to produce a highly emissive dispersion in a rich water solution. A greater fluorescence quantum yield of approximately 50% was obtained when a luminogenic β-diketonate, 1-(4-methoxyphenyl)-3-(3-hydroxyethyl-pyridinium bromide)-1,3-propandione (prepared by the Claisen condensation reaction and subsequent quaternization), was molecularly dispersed and enclosed by a couple of atomically flat ultrathin (approximately 1.0 nm) silicate sheets of anionic layered clay. By accommodating β-diketonate into a narrow interlamellar space (approximately 0.4 nm distance), the molecular motion was suppressed, as confirmed by a smaller non-radiative relaxation rate constant, which was obtained by time-resolved luminescence and quantum yield measurements. Because the dense packing of β-diketonate quenched the excited state, the isolation of luminogens by the co-adsorption of photochemical inert cations (tetramethylammonium and benzylammonium) was prevented by concentration quenching. A lower quantum yield was obtained by expanding the interlayer distance above 1.0 nm by co-adsorbing a photo-inactive water-soluble polymer, poly(vinylpyrrolidone). Therefore, the fixation and spatial separation of β-diketonate in the narrow interlayer space was determined to be essential for obtaining strong emission.

Organically Modified Bentonite as an Efficient and Reusable Adsorbent for Triclosan Removal from Water

Triclosan, an antibacterial agent, in the environment is of great concern; thus, an efficient method for its removal from an aqueous system is required. Removal of triclosan from water was achieved by an organically modified bentonite, dioctadecyldimethylammonium bentonite. The highest adsorbed amount achieved under the optimized conditions was 1750 mg·g^-1, which is higher than that reported using such adsorbents as activated carbons, carbon nanotubes, zeolites, and other nanoporous materials. Complete removal of triclosan was achieved from the aqueous triclosan solution at a concentration 10 mg·L^-1 using 3 mg/60 mL of 2C18-BT. The adsorbent was reusable, as examined by washing and reuse of the adsorbent for 5 cycles.

Template Synthesis of Well-Defined Rutile Nanoparticles by Solid-State Reaction at Room Temperature

Well-defined nanoparticles of rutile (with the size of 5 nm) were successfully prepared by the unusual solid-state transformation of an amorphous precursor in well-defined nanospace of a mesoporous silica template (SBA-15) at room temperature. An aqueous colloidal suspension of the rutile nanoparticles was successfully obtained by dissolution of SBA-15 and subsequent pH adjustment. The isolated rutile nanoparticles were used for H₂ evolution from an aqueous methanol solution by UV irradiation.

Hydrated Silicate Layer Formation on Mica-Type Crystals

This study aims to investigate the growth of a cation-exchangeable hydrated layer on the surface of mica-type silicates based on a synthetic fluorophlogopite and a natural muscovite. Through the reaction of a synthetic fluorophlogopite using LiF, MgCl₂, and a silica sol in water at 373 K for 48 h in the presence of urea, a hydrated phyllosilicate was formed on the fluoromica. As a result of examining the reaction in the alkali solution in the absence of Mg²⁺, the uptake of the silica sol would be included as a chemical process to begin the crystallization on fluorophlogopite because the lithium and ammonium ions (generated by urea hydrolysis) are known to contribute to enhanced adsorption. We found that the urea hydrolysis increased the pH, which, in turn, assisted the formation of magnesium hydroxide after the isomorphic substitution of Li⁺ for Mg²⁺. Bridging tetrahedral SiO₄ with a magnesium-lithium double hydroxide afforded a 1 nm silicate layer. This facilitated the hectorite-like hydrated silicate layer to adhere closely to both the crystal edge and the cleaved face of the synthetic mica, which was found to coat the surface homogeneously. Only surface crystals were found to form through this process. The layered silicates included exchangeable hydrated cations for the cation-exchange reactions to expand the interlayer space by a cationic surfactant, dimethyldistearylammonium. The layered silicate also adsorbed methylene blue as a cationic dye in the aqueous phase. Apart from fluoromica, the natural muscovite also provided the surface to grow hydrated silicate layers, as a crystal turned dense blue when reacted with methylene blue.

Atomic-Scale Imaging of a Free-Standing Monolayer Clay Mineral Nanosheet Using Scanning Transmission Electron Microscopy

Although aberration-corrected scanning transmission electron microscope (STEM) enables the atomic-scale visualization of ultrathin 2D materials such as graphene, imaging of electron-beam sensitive 2D materials with structural complexity is an intricate problem. We here report the first atomic-scale imaging of a free-standing monolayer clay mineral nanosheet via the annular dark field (ADF) STEM. The monolayer clay nanosheet was stably observed under optimal conditions, and we confirmed that the hexagonal contrast pattern with a pore of ∼4 Å corresponds to the atomic structure of clay mineral that consisted of adjacent Si, Al, Mg, and O atoms by comparison with simulations. The findings offer the usefulness of ADF-STEM techniques for the atomic scale imaging of clay minerals and various 2D materials having electron-beam sensitivity and structural complexity than few-atom-thick graphene analogues.

Distinctive stability of a free-standing monolayer clay mineral nanosheet via transmission electron microscopy

The distinctive stability of the monolayer clay mineral demonstrated by electron diffraction.

Microporous layered silicates: old but new microporous materials

The properties and applications of microporous layered silicates, having both intralayer micropores and interlayer spaces, are reviewed.

Novel Flexible Supramolecular Assembly of Dioleyldimethylammonium Ion in a Two-Dimensional Nanospace Studied by Neutron Scattering

Dioleyldimethylammonium ion was used to construct two-dimensional hybrid structures with clay and the hybrid was shown to possess higher flexibility than that of the hybrid of dioctadecyldimethylammonium and the clay. The important difference between the two surfactant systems was studied by quasi-elastic neutron scattering, confirming the useful characteristics of the presently designed dioleyldimethylammonium-clay over the well-known dioctadecyldimethylammonium-clay for various materials applications.

Conversion of a 2D Lepidocrocite-Type Layered Titanate into Its 1D Nanowire Form with Enhancement of Cation Exchange and Photocatalytic Performance

Layered titanates with one-dimensional (1D) shapes have been an important class of nanomaterials due to their combination of 1D and 2D fascinating properties. Among many layered titanates, lepidocrocite-type layered titanates have significant advantages such as superior intercalation and exfoliation properties, while the synthesis of the 1D-shape forms is still challenging. Here, we report on a facile one-pot hydrothermal conversion of a lepidocrocite-type layered titanate into the corresponding nanowire-shape form. The reaction mechanism involves the decomposition of the starting layered titanate into 1D small segments which assemble into the nanowire. This new nanowire shows properties resulting from the combination of 1D and 2D nanostructural features, excellent cation exchange ability, and high photoinduced charge separation and photocatalytic efficiency. As a demonstration, we evaluate the nanowire as a sequestrating material capable of collecting toxic cations, like Cd²⁺, from water and photoreducing them (immobilizing them tightly). We find that the nanowire shows an efficient and ultrafast photoimmobilization activity, whereas the starting layered titanate and a benchmark TiO₂ photocatalyst (P25) show no activity under the identical conditions. The photoimmobilization rate (within 1 min) is considerably faster than the cation exchange rates reported for state-of-the-art cation exchangers (with no photoimmobilization ability). The nanowire used for photoimmobilization reactions is easily recovered from water by decantation, showing the possible practical use for safe disposal of toxic cations in the environment.

Zeolitic intralayer microchannels of magadiite, a natural layered silicate, to boost green organic synthesis

Despite the considerable attention given to the applications of magadiite in previous research, the properties of this natural layered silicate have remained mysterious due to the lack of crystal structure information. On the other hand, no one has doubted the intercalation capability between the layers. Here we succeed in determining the structure of magadiite using X-ray pair distribution functions and synchrotron powder diffractometry. We discover unexpected zeolitic microchannels within the layers. We describe efficient synthesis of 100% pure benzoic acid from toluene by using magadiite as an additive in a TiO2 photocatalytic system oxidizing toluene. Based on the uncovered structure of magadiite, we clarify the mechanism of this unique photocatalytic system: the microchannels of magadiite not only separate/accommodate the desired partially oxidized product formed on TiO2 but also prevent the accumulation of the overoxidized products on the TiO2 surface that deactivates the photocatalytic activity.

Layered Silicates as a Possible Drug Carrier

The potential of layered silicates as drug carrier is overviewed. Due to their large surface area and expandable interlayer space to accommodate drug molecules, layered silicates have a potential as carrier of various molecules. In addition to the electrostatic interactions between negatively charged layered silicates and positively charged drug molecules, the organic modification of the surface of layered silicates has been applied to accommodate a variety of drug molecules not only cationic ones. The in vitro release experiment of the accommodated drug molecules has been reported under the acidic conditions. In order to discuss the future direction of layered silicates as drug carrier, materials' variation of layered silicates and their modification, and the reported stimuli-responsive hybrids based on layered silicates were introduced.

Materials Nanoarchitectonics Using 2D Layered Materials: Recent Developments in the Intercalation Process

Layered inorganic solids as an attractive classification of 2D materials offer material diversity and a wide range of interesting properties. Layered inorganic solids provide an expandable 2D nanospace between each individual layer, the so called interlayer space, to accommodate/arrange guest species such as molecules, nanoparticles, and polymer chains and design unique nanoarchitectures, resulting in the production of intercalation compounds showing different properties in comparison to those of virgin layered materials and guest species. Layered inorganic solids can also be exfoliated to result in nanosheet production. Further ordering of exfoliated nanosheets is also possible via different methods and normally leads to creating soft materials presenting properties and applications different from that of relatively rigid intercalation compounds. Here, the latest studies and up-to-date developments on the possible techniques of designing novel types of materials using layered inorganic solids are specifically highlighted.

Templated synthesis of atomically-thin Ag nanocrystal catalysts in the interstitial space of a layered silicate

Enclosing functional nanoparticles in stable inorganic supports is important for generating ultra-stable catalytic active sites with good performance and material utilization efficiency. Here we describe a simple method to synthesize ultra-thin Ag nanocrystals with dimensions that are defined by the ∼1.4 nm 2D interlayer separating a layered silicate nanostructure. We call the particles "nanoplates" because they are <1.4 nm thick in one direction and their in-plane dimensions are defined by reaction time. The layered silicate is pillared with dialkylurea, which serves both as a reducing agent for the Ag precursor and immobilizes the Ag nanoplates in the interstitial nanospace. The supported Ag nanoplates showed catalytic activity for hydrolysis of NH3BH3 and generation of H2 at room temperature. These supported Ag nanocatalysts had performance much higher than spherical Ag nanoparticles. They, moreover, had performance and stability comparable to costly supported Pt nanoparticles.

Formation and optical properties of metal/10-hydroxybenzo[h]quinolone complexes in the interlayer spaces of magadiite by solid-solid reactions

Intercalation and in situ formation of three fluorescent complexes, Al(III)-, Cr(III)- and Cu(II)-10-hydroxybenzo[h]quinolone (M-HBQ, M = Al, Cr and Cu), in the interlayer spaces of magadiite (mag) were studied by solid-solid reactions between metal ions exchanged mags (M-mag, M = Al, Cr and Cu) and HBQ. Results show that the basal spacings of the intercalated composites increase after the intercalation of HBQ into M-mags. The amount of HBQ in the intercalated compounds is different due to the amount of metal ions and the diversification of coordination ability of metal ions, and the order of the coordination ability of these three metal ions is Cu²⁺ > Cr³⁺ > Al³⁺. The amount of the metal cations in the interlayer of mag is enough for the in situ complex formation of M-HBQ complexes. The slight shift of the absorption and luminescence bands of the complexes suggests the different microstructures, including molecular packing of the complexes in the interlayer spaces of mags, resulting that the host-guest interactions are formed. These findings show that the intercalation and in situ formation of M-HBQ complexes (M = Al, Cr and Cu) in the interlayer space of mag are successfully achieved in the current work.

Optical Humidity Sensing Using Transparent Hybrid Film Composed of Cationic Magnesium Porphyrin and Clay Mineral

A transparent hybrid film composed of cationic magnesium porphyrin and clay mineral was developed, and its chromic behavior depending on relative humidity (RH) was investigated. The hybrid film was obtained via intercalation of magnesium porphyrin into clay film; magnesium porphyrin was intercalated into the interlayer spaces of the clay mineral without aggregation. The absorption spectra of the hybrid film showed red shifts compared to the aqueous solution of magnesium porphyrin because of the π-conjugated system extension with coplanarization of the meso-substituted pyridinium group and porphyrin ring. The absorption maximum of the hybrid film was gradually shifted to a shorter wavelength, and the color of the hybrid film was changed with increasing RH. The X-ray diffraction measurement suggested that the basal space of clay was expanded with increasing RH, indicating that the interlayer space of clay was expanded by water adsorption, and the spectral shift was induced by the change in coplanarization degree between the porphyrin ring and meso-substituted pyridinium groups.

Zeolite framework functionalisation by tuneable incorporation of various metals into the IPC-2 zeolite

The incorporation of metals into the IPC-2 zeolite framework was performed. Synthesised materials were tested in catalysis.

Mechanochemical methods for the preparation of intercalation compounds, from intercalation to the formation of layered double hydroxides

Mechanochemical methods (solid–solid reactions under ambient conditions or solvent free synthesis) are useful for the preparation of intercalation compounds.

Photoluminescence by Intercalation of a Fluorescent β-Diketone Dye into a Layered Silicate

A β-diketone dye was packed into the two-dimensional nanospace of a synthetic smectite (Sumecton SA), which is a cation-exchangeable layered silicate, to induce strong emission owing to molecular packing of the dye. An emissive dye, 1-(4-methoxyphenyl)-3-(4-pyridyl)-1,3-propandione, was prepared through a Claisen condensation reaction; the dye exhibited aggregation-induced emission, which is enhanced emission owing to clustering of molecules to form aggregates in poor solvents or in the solid state. The dye was nonemissive in solution. However, strong green emission was observed because of the restriction of molecular motion when the protonated dye was accommodated into the interlayer nanospace of the silicate layers through cation-exchange reactions. The restricted motion was confirmed by the smaller nonradiative relaxation rate constant obtained by time-resolved luminescence and quantum yield measurements. A moderate dye packing (0.11 mmol/g) in the interlayer space is important to obtain enhanced emission, whereas the intercalation of a large amount of dye (0.27 mmol/g) resulted in concentration quenching. Therefore, the interlayer space of the layered silicate used here was responsible for the strong emission because of moderate packing of the accommodated β-diketones.