Colorimetric and Fluorescent Chemosensors for the Detection of 2,4,6-Trinitrophenol and Investigation of their Co-Crystal Structures

Selective sensing of picric acid using a Zn(II)-metallacycle: experimental and theoretical validation of the sensing mechanism and quantitative analysis of sensitivity in contact mode detection

A combination of N,N',N''-tris(3-pyridyl)-1,3,5-benzenetricarboxamide (L1) and p-chlorobenzoic acid (HL2) with Zn(NO3)2·6H2O resulted in the formation of a dinuclear metallacycle [ZnL1(L2)2(DMF)2]2 (1(DMF)4). In 1(DMF)4, the Zn(II) centre adopts a square pyramidal geometry, while one of the pyridyl N out of the three pyridyl groups in L1 remained uncoordinated. Solvated DMF molecules are present in 1(DMF)4. The structural and chemical nature of 1(DMF)4 is effective for it to act as a potential fluorescent probe for the detection of nitroaromatic compounds. It is observed that the probe, 1(DMF)4, could selectively detect picric acid (PA) among various aromatic compounds in solution (DMSO), while the solid state (contact mode) detection showed a positive sensing response for the nitrophenols (PA: 87% quenching efficiency, 2,4-dinitrophenol (2,4-DNP): 57% quenching efficiency and 4-nitrophenol (4-NP): 40% quenching efficiency). The limit of detection (LOD) of PA by the probe in DMSO was found to be 6.8 × 10-11 M while the LOD in contact mode detection was estimated to be 0.49 ng cm-2. The mechanism of selective detection of PA by 1(DMF)4 in DMSO was analyzed through photophysical studies, 1H-NMR experiments and also by density functional theory (DFT) calculations. The effective overlap of the absorption spectrum of 1(DMF)4 and emission spectrum of PA in DMSO suggests that the Förster resonance energy transfer (FRET) is responsible for quenching phenomena in DMSO. The DFT calculations and molecular docking studies showed the adduct formation due to the favorable interactions between 1(DMF)4 and PA in DMSO, while negligible interactions were observed between 1(DMF)4 with other aromatic compounds. The experimental and DFT studies showed that the efficient sensing ability of PA by 1(DMF)4 in the solid-state was due to photoelectron transfer (PET) and FRET phenomena described herein.

Mixed N,O-donor Directed Blue Emissive Nano-dispersed Mesoporous Mn(II)-MOF: Dual Sensing Probe for Recyclable and Ultrasensitive ppb-Level Recognition of TNP and Cr(VI)-Oxoanions

A new mesoporous Mn(II)-MOF [Mn2(phen)2(nia)2]∞ with 4-c uninodal net topology and reiterating rectangular channels in its cargo-net like extension was synthesized using π-conjugated phenanthroline (phen) and syn-syn bridging 5-nitroisopthalic acid (nia) linkers. The MOF (1) exhibited phase purity, uniform morphology, photo and thermal stability, and robustness; duly triggered by the exceptional framework rigidity via intermolecular H-bonding and interlayer π-π stacking interactions. The bright-blue luminescence of the MOF nano-dispersion was explored for sensitive, specific and ultrafast detection of trinitrophenol (TNP) with extremely low LOD (90.62 nM), high KSV (18.27×104 M-1) and Kq (4×1014 M-1s-1). The vapor-phase TNP sensing was also accomplished. Additionally, 1 served towards discriminatory, aqueous-phase monitoring of Cr(VI)-oxoanions, depicting LODs: 36.08 and 35.70 ppb; KSV: 3.46×104 and 4.87×104 M-1; Kq: 3.26×1013 M-1s-1 and 4.31×1013 M-1s-1; and response time: 32 and 40s for CrO4 2- and Cr2O7 2- respectively. The quenching mechanisms (i. e., RET, PET, IFE, weak interactions, collisional quenching and π⋅⋅⋅π stacking) was explained from several experimental investigations and theoretical DFT calculations. The recyclable sensing events and quantification from complex environmental matrices with admirable recovery rates and high KSV (13.02-22.44×104; ~6.31-10.98×104 and ~6.60-11.42×104 M-1 for TNP, CrO4 2- and Cr2O7 2-) undoubtedly advocated the consistency of the probe.

Fluorescent Carbon Nitride Nanoparticles for Picric Acid Sensing

Detection of nitroaromatic explosives is essential in the area of environmental safety. Fluorescent carbon nitride nanoparticles is a promising material for this purpose. Herein, we have prepared fluorescent carbon nitride nanoparticles (CNNPs) by one step thermal treatment of formamide. These fluorescent CNNPs is sensitive towards picric acid (PA) than other analytes both in aqueous medium and on test paper which is witnessed by fluorescence quenching based on inner filter effect (IFE). The PA detection with the fluorescent CNNPs is observed in the concentration ranges, 0 µM to 60 µM with linear range of 10 nM to 25 µM. The minimum detection limit in aqueous medium and solid phase are determined to be 26.20 nM and 10 µM respectively. Finally, the fluorescent CNNPs is applied for detection of PA in real water samples. The recoveries are in the ranges from 99.54 to 116.35% with relative standard deviation less than 3.85%. This proposed fluorescent method can act as suitable analytical technique to monitored PA concentration in water samples.

BODIPY as a Multifunctional Theranostic Reagent in Biomedicine: Self-Assembly, Properties, and Applications

The use of boron dipyrromethene (BODIPY) in biomedicine is reviewed. To open, its synthesis and regulatory strategies are summarized, and inspiring cutting-edge work in post-functionalization strategies is highlighted. A brief overview of assembly model of BODIPY is then provided: BODIPY is introduced as a promising building block for the formation of single- and multicomponent self-assembled systems, including nanostructures suitable for aqueous environments, thereby showing the great development potential of supramolecular assembly in biomedicine applications. The frontier progress of BODIPY in biomedical application is thereafter described, supported by examples of the frontiers of biomedical applications of BODIPY-containing smart materials: it mainly involves the application of materials based on BODIPY building blocks and their assemblies in fluorescence bioimaging, photoacoustic imaging, disease treatment including photodynamic therapy, photothermal therapy, and immunotherapy. Lastly, not only the current status of the BODIPY family in the biomedical field but also the challenges worth considering are summarized. At the same time, insights into the future development prospects of biomedically applicable BODIPY are provided.

Aryl Boronic Acids in Columnar Stacked Co-crystalline Materials: Key-Factors Governing the Assembly with Quinones

The assembly of aryl boronic acids B with quinones Q into columnar mixed stacked materials, as previously observed in the solid-state, has been here subjected to a detailed theoretical analysis focusing on the properties of the isolated synthons (HOMO-LUMO energies, electron affinity, ionization potential, reorganization hole/electron energies, partial Hirshfeld atomic charges and conformation stabilities) as well as those of the 1 : 1 adducts (Hirshfeld analysis, IRI surfaces, Hirshfeld atomic charges, hydrogen bond and slipped stacked π-π contributions). The overall picture obtained throught this study shows an intricate pattern of interconnected factors contributing to the formation and stability of the B_x Q_y adducts, and it unveils the importance of parameters such as HOMO-LUMO gap, polarization and charge transfer, in addition to the more evident hydrogen bond and slipped-stacked π-π interactions in the formation of 1 : 1 adducts. An explanation has been also given for the presence in some B_x Q_y adducts of the rare anti-anti conformation for the BO-H group with respect to the most studied and common anti-syn conformation.

Dual-Ligand Strategy Employing Rigid 2,5-Thiophenedicarboxylate and 1,10-Phenanthroline as Coligands for Solvothermal Synthesis of Eight Lanthanide(III) Coordination Polymers: Structural Diversity, DFT Study, and Exploration of the Luminescent Tb(III) Coordination Polymer as an Efficient Chemical Sensor for Nitroaromatic Compounds

Lanthanide coordination polymers (Ln-CPs) are potential chemosensors when fabricated to depict a detectable change in optical properties on interaction with target analytes. This work investigates the interaction of nitroaromatic compounds with Ln-CPs leading to induced changes in fluorescence emission intensity, a crucial strategy to develop a selective and sensitive system for the sensing of nitroaromatics. Approaching toward this objective, solvothermal reactions of 2,5-thiophenedicarboxylic (2,5-TDC) acid, 1,10-phenanthroline (1,10-Phen), and Ln(NO3)3·xH2O are carried out to assemble eight Ln(III) coordination polymers [Ln2(2,5-TDC)3(1,10-Phen)2(H2O)2] [Ln = Pr (1), Nd (2)], {[Tb(2,5-TDC)1.5(1,10-Phen)(H2O)]·DMF} (3), and [Ln(2,5-TDC)1.5(1,10-Phen)]·xH2O (Ln = Tb (4), Dy (5), Ho (6), Er (7), and Yb (8)); x = 0 for CP 4, 5, 6, and 8 and x = 1 for CP 7 with two different space groups and dimensions. The as-synthesized polymers 1-8 are characterized by powder X-ray crystallography, infrared spectroscopy, and thermogravimetric analysis. The structure-corroborated density functional theory (DFT) studies are done on the selected CPs to investigate the interactions between different structural motifs of the assembled CPs. The luminescence properties of CP 4 are explored in detail and are found to be highly sensitive for the detection of p-nitrotoluene as indicated by the most intensive fluorescence quenching with the lowest limit of detection (0.88 ppm) and high quenching constant (4.3 × 104 M-1). Other nitro compounds (viz., o-nitrobenzaldehyde, m-nitroaniline, picric acid, m-dinitrobenzene, p-nitrophenol, and p-nitroaniline) are also screened for potential sensing by CP 4.

Fluorescein based fluorescent and colorimetric sensors for sensitive detection of TNP explosive in aqueous medium: Application of logic gate

Rapid detection of 2,4,6-trinitrophenol (TNP) in real samples has recently attained considerable attention from the perspective of national security, human health, and environmental safety. In this context, cost-effective and convenient detection of TNP explosive was accomplished through two new fluorescein based sensors F2 and F3. Sensors displayed effective fluorescence quenching response towards TNP in the aqueous medium. Highly sensitive fluorescence detection of TNP explosive (detection limit, 0.73 (F2) and 1.7 nM (F3)) was governed by ground-state charge transfer complex formation, facilitated by favorable H-bonding between sensor and TNP explosive. Fluorescence quenching mechanism for the detection of TNP explosive was investigated through UV-Visible absorption, dynamic light scattering (DLS), density functional theory (DFT) calculations, the Benesi-Hildebrand, and Job's plots. Advantageously, sensors displayed selective and immediate colorimetric recognition of TNP explosive. Importantly, sensors exhibited quick response time towards TNP even in the presence of potential interferences that make them highly suitable for practical applications. Sensors were successfully applied for fluorescent and colorimetric detection of TNP explosive in industrial water samples and fabrication of logic gates. Further, convenient contact mode and instant surface sensing of TNP explosive were achieved through the fabrication of fluorescent strips and explosive responsive test kits.

A metal complex based fluorescent chemodosimeter for selective detection of 2,4-dinitrophenol and picric acid in aqueous medium

The work in this report describes the syntheses, characterization, crystal structures, absorption and emission spectra and DFT calculations of three dizinc(II) compounds of composition [ZnII2L(μ1,1-N3)(N3)2] (1), [Zn2L'(2,4-dinitrophenolate)2] (2) and [Zn2L'(picrate)2]...

Novel and Reliable Chemosensor Based on C. dots from Sunflower seeds for the Distinct Detection of Picric Acid and Bilirubin

Based on the green chemistry approach, highly fluorescent and novel carbon dots (C. dots) were synthesized from naturally available and cost effective sunflower seeds. The obtained C. dots showed a fluorescence quantum yield (Q.Y) of 9.5% with high water dispersibility and photostability. The obtained C. dots were employed for the detection of picric acid (PA) and bilirubin. A good linear relationship in the range of 20-60 nM was obtained for PA with a limit of detection (LOD) as low as 3.86 nM. C. dots were successfully incorporated in the agarose matrix which enabled them to be employed as a solid platform for the in situ detection of PA. The fluorescence of C. dots was selectively quenched by bilirubin compared to other biomolecules with a LOD of 2.03 μM. Use of C. dots as potential candidate for bilirubin detection was verified by real sample analysis. Further, the separation of C. dots was performed using column chromatography and the optical properties of the two different fractions obtained were studied. The blue fraction of C. dots was found to exhibit a higher fluorescence Q.Y and excitation independent emission, with an improved detection of PA and bilirubin.

Colorimetric sensors and nanoprobes for characterizing antioxidant and energetic substances

The development of analytical techniques for antioxidant compounds is important, because antioxidants that can inactivate reactive species and radicals are health-beneficial compounds, also used in the preservation of food and protection of almost every kind of organic substance from oxidation. Energetic substances include explosives, pyrotechnics, propellants and fuels, and their determination at bulk/trace levels is important for the safety and well-being of modern societies exposed to various security threats. Most of the time, in field/on site detection of these important analytes necessitates the use of colorimetric sensors and probes enabling naked-eye detection, or low-cost and easy-to-use fluorometric sensors. The use of nanosensors brings important advantages to this field of analytical chemistry due to their various physico-chemical advantages of increased surface area, surface plasmon resonance absorption of noble metal nanoparticles, and superior enzyme-mimic catalytic properties. Thus, this critical review focuses on the design strategies for colorimetric sensors and nanoprobes in characterizing antioxidant and energetic substances. In this regard, the main themes and properties in optical sensor design are defined and classified. Nanomaterial-based optical sensors/probes are discussed with respect to their mechanisms of operation, namely formation and growth of noble metal nanoparticles, their aggregation and disaggregation, displacement of active constituents by complexation or electrostatic interaction, miscellaneous mechanisms, and the choice of metallic oxide nanoparticles taking part in such formulations.

Nitrogen and Phosphorus Co-Doped Carbon Dots for Selective Detection of Nitro Explosives

In this work, a highly selective and sensitive method has been developed for the detection of trinitrophenol (TNP), which is a dangerous explosive. For this purpose, N and P co-doped carbon dots (NP-Cdots) have been used. Synthesis of N and P co-doped carbon dots has been carried out by a simple and quick method. X-ray photoelectron spectroscopy analysis was carried out to detect the doping of N and P. These carbon dots are insoluble in water (inNP-Cdots). These carbon dots were functionalized by treating them with conc. HNO3 so that they become water-soluble (wsNP-Cdots). These dots were characterized by different analytical techniques such as IR, UV-vis, and fluorescence spectroscopy. The as-prepared wsNP-Cdots have good fluorescence properties. The average diameter of wsNP-Cdots is found to be 5.7 nm with an interlayer spacing (d-spacing) of 0.16 nm. The as-prepared wsNP-Cdots are highly sensitive and selective toward TNP, as observed using a fluorescence quenching technique. The quenching constant for TNP is found to be very high (8.06 × 104 M-1), which indicates its high quenching ability. The limit of detection is found to be 23 μM.

Synthesis of eight isostructural 2D lanthanide coordination polymers assembled by rigid furan-2,5-dicarboxylic acid and flexible adipic acid as linkers and exploration of luminescent Eu/Tb polymers as efficient and sensitive sensors for nitroaromatic compounds

Eight isostructural coordination polymers were synthesized by a solvothermal method. The luminescent Eu/Tb polymers function as efficient sensors for nitroaromatics via turn-off mode.

Selective detection and removal of picric acid by C2N surface from a mixture of nitro-explosives

Nitro-explosives are a severe threat to the environment; therefore, detection and removal of nitro-explosives is the need of time.

Hydrothermal synthesis of WS2 quantum dots and their application as a fluorescence sensor for the selective detection of 2,4,6-trinitrophenol

Selective and sensitive detection of 2,4,6-trinitrophenol (TNP), a member of the nitroaromatic explosives family, was demonstrated using luminescent WS₂ quantum dots.

The BODIPY-Based Chemosensor for Fluorometric/Colorimetric Dual Channel Detection of RDX and PA

A fluorometric/colorimetric dual-channel chemosensor based on a hydrazine-substituted BODIPY probe has been successfully fabricated for the detection of RDX and PA. The chemosensor displays turn-on fluorescence behavior upon RDX with a detection limit of 85.8 nM, while showing a turn-off response to PA with a detection limit of 0.44 μM. Meanwhile, an obvious color difference is observed by the naked-eye after the reaction for RDX. Thus, in application, a two-to-two logic gate is constructed for potential application in explosives detection. Additionally, portable equipment is also developed for in situ determination of RDX.

A novel multi-purpose Zn-MOF fluorescent sensor for 2,4-dinitrophenylhydrazine, picric acid, La3+ and Ca2+: Synthesis, structure, selectivity, sensitivity and recyclability

A new three-dimensional luminescence Zn-MOF sensor with the molecular formula [Zn₄(μ₃-OH)₂(ptptc)_1.5(DMA)(H₂O)₂]·2DMA (complex 1) for the selective sensing of 2,4-dinitrophenylhydrazine (2,4-DNPH), picric acid (PA), La³⁺ and Ca²⁺ has been synthesized from terphenyl-3,3',5,5'-tetracarboxylic acid (H₄ptptc) and zinc nitrate under solvothermal conditions. XRD analysis reveals that complex 1 crystallizes in monoclinic system P2₁/n space group and consists of a three-dimensional network with one-dimensional channels, which are expected to facilitate the diffusion, concentration and detection processes. Real-time fluorescence quenching responses and good reversibility were observed in the fluorescence titration experiments with nano-molar scale detection limits for 2,4-dinitrophenylhydrazine (2,4-DNPH, 100 nM) and picric acid (PA, 500 nM). Noticeable emission band shift from 365 nm to 420 nm was observed when treated complex 1 with La³⁺ and a new emission band centered at 475 nm appeared when treated complex 1 with Ca²⁺ in the metal ions sensing experiments. In virtue of its high selectively, good sensitively and recyclability complex 1 could be a promising fluorescent sensor for explosives and metal ions.

Supramolecular Sensing of 2,4,6-Trinitrophenol by a Tetrapyrenyl Conjugate of Calix[4]arene: Applicability in Solution, in Solid State, and on the Strips of Cellulose and Silica Gel and the Image Processing by a Cellular Phone

A calix[4]arene conjugate possessing a tetrapyrenyl moiety at its upper rim (R) is designed as a receptor for sensing trinitrophenol (TNP). To understand the role of the calix[4]arene platform and that of pyrenyl moieties in R, two other control molecules were synthesized. These are as follows: the one possessing a tetraphenyl moiety in place of tetrapyrenyl (R 1 ) and the other one is a p-pyrenyl-hydroxy benzene (R 2 ) that is devoid of the calix[4]arene platform. The R shows high sensitivity toward TNP in tetrahydrofuran (THF) over eleven other nitroaromatic compounds (NACs) studied by exhibiting large fluorescence enhancement and hence is selective to TNP over the other NACs studied. However, the control molecules R 1 and R 2 showed only marginal fluorescence enhancement, supporting the need of a calixarene platform and the presence of a tetrapyrenyl moiety in the receptor system for the selective sensing of TNP. Further, R 1 and R 2 are not suitable for sensing, since these exhibit similar fluorescence response over several NACs studied. The binding of TNP by R has been addressed by fluorescence titration and isothermal titration calorimetry. The nature of the complexation of TNP by R has been revealed by the computational calculations, wherein the data showed the entrapment of TNP by two adjacent pyrene moieties via π-π stacking interactions. Such host-guest complexation is expected to restrict the mobility of the pyrene moieties present in R. The reduction of the flexibility of the pyrenyl moieties of R upon TNP binding is evidenced by the 1H NMR spectral study, wherein this acts as an additional evidence for the complexation. In the present study, the sensing of TNP by R has been shown in THF solution, on the surface of silica gel and the cellulose paper to result in lowest detection limits (LODs) of 1.5, 3.5, and 6.5 μM, respectively. Even the solid mixture of R and TNP showed LOD of 2.1 μmol. Since R is expected to show supramolecular aggregation that is dependent on the guest species, the corresponding details were probed by microscopy techniques, using scanning electron microscopy, atomic force microscopy, and transmission electron microscopy methods, and significant changes in the aggregation of R upon interaction with TNP were found. Such aggregation is responsible for the observed fluorescence enhancement. Thus, the tetrapyrenyl calix[4]arene conjugate (R) acts as a sensitive and robust platform for selective detection of TNP from a mixture of nitroaromatic compounds (NACs) wherein the fluorescence intensities can be imaged and managed by a cellular phone.

Halogen-Bond-Assisted Photoluminescence Modulation in Carbazole-Based Emitter

Halogen bonding between a carbazole-based, pyridine-substituted organic semiconductor and a common halogen-bond donor (pentafluoroiodobenzene) yields efficient halogen-bond-driven fluorescence modulation in solution. Steady-state, time-resolved emission and absorption spectroscopy as well as density functional theory studies demonstrate that the fluorescence modulation arises from halogen-bond-induced intramolecular charge transfer. Fluorescence modulation offers a range of possibilities both in solution and in the solid state, for instance providing a potential pathway for the design of tunable luminescent materials for light-emitting devices.

Highly selective detection of 2,4,6-trinitrophenol by using newly developed terbium-doped blue carbon dots

The detection of nitroaromatic explosives is of great importance owing to their strong explosive power and harmfulness in terms of the environment, homeland security and public safety. Herein, rare earth-doped carbon dots with multifunctional features were firstly prepared by simply keeping the mixture of terbium(iii) nitrate pentahydrate and citric acid at 190 °C for 30 min. The as-prepared terbium doped carbon dots (Tb-CDs), through a rapid and simple direct carbonization route, have a size of about 3 nm, and exhibit excitation wavelength dependent emission of blue fluorescence, are stable, and can be applied for the selective and colorimetric detection of 2,4,6-trinitrophenol (TNP) in the range of 500 nM-100 μM with a limit of detection of 200 nM based on the inner filtering effect (IFE) of the excitation and emission bands of Tb-CDs by TNP and the electron transfer (ET) from Tb-CDs to TNP, giving a precise and highly reproducible result for detecting complex water samples.

Amorphous Carbon Dots and their Remarkable Ability to Detect 2,4,6-Trinitrophenol

Apparently mundane, amorphous nanostructures of carbon have optical properties which are as exotic as their crystalline counterparts. In this work we demonstrate a simple and inexpensive mechano-chemical method to prepare bulk quantities of self-passivated, amorphous carbon dots. Like the graphene quantum dots, the water soluble, amorphous carbon dots too, exhibit excitation-dependent photoluminescence with very high quantum yield (~40%). The origin and nature of luminescence in these high entropy nanostructures are well understood in terms of the abundant surface traps. The photoluminescence property of these carbon dots is exploited to detect trace amounts of the nitro-aromatic explosive - 2,4,6-trinitrophenol (TNP). The benign nanostructures can selectively detect TNP over a wide range of concentrations (0.5 to 200 µM) simply by visual inspection, with a detection limit of 0.2 µM, and consequently outperform nearly all reported TNP sensor materials.

Photostable and Low-Toxic Yellow-Green Carbon Dots for Highly Selective Detection of Explosive 2,4,6-Trinitrophenol Based on the Dual Electron Transfer Mechanism

Advances in the development of fluorescent carbon dots (CDs) for detecting nitro-explosives have attracted great interest. However, developing long-wavelength luminescence CDs for highly selective determination of 2,4,6-trinitrophenol (TNP) and getting insight into the detection mechanism remain further to be investigated. Here, excitation-independent yellow-green emission CDs with good photostability and low biotoxicity were introduced for detecting TNP selectively. Then, two types of electron transfer (ET) processes including hydrogen-bond interaction-assisted ET and proton transfer-assisted ET are suggested to be responsible for their photophysical behavior. Finally, the visual detection of TNP has been successfully developed by a CD-based indicator paper. The facile, highly sensitive, and selective detection for TNP in both of a solution and a solid phase makes CDs potentially useful in environmental sensor applications.

Selective sensing of 2,4,6-trinitrophenol (TNP) in aqueous media with "aggregation-induced emission enhancement" (AIEE)-active iridium(iii) complexes

A series of new phosphorescent cyclometalated iridium(iii) complexes which possess aggregation-induced emission enhancement (AIEE) detect 2,4,6-trinitrophenol (TNP) selectively with high quenching constants in aqueous media. The sensing mechanism was systematically investigated by mass spectrometry, ¹H and ¹⁹F NMR spectroscopy. X-ray crystal structure analysis reveals an O-HO interaction between TNP and the ancillary ligand which explains the high selectivity for TNP compared to other nitro-aromatics.

A quinoline-based compound for explosive 2,4,6-trinitrophenol sensing: experimental and DFT-D3 studies

A quinoline-based compound, 2,5-dimethylbis(quinolin-2-ylmethylene)benzene-1,4-diamine (DQB), has been found to be a turn-off chemosensor for 2,4,6-trinitrophenol.

A long-persistent phosphorescent chemosensor for the detection of TNP based on CaTiO3:Pr3+@SiO2 photoluminescence materials

An effective and facile phosphorescence sensing approach was developed for 2,4,6-trinitrophenol (TNP) detection using CaTiO₃:Pr³⁺@SiO₂ photoluminescence materials.

A Fluorescent Anionic MOF with Zn4(trz)2 Chain for Highly Selective Visual Sensing of Contaminants: Cr(III) Ion and TNP

Heavy-metal ions and nitroaromatic substances are highly toxic and harmful to human health and the ecological environment. It is an urgent issue to selectively detect and capture these toxic substances. By introducing the triazole ligand to the π-conjugated aromatic carboxylate system and borrowing the organic template open framework idea, a stable fluorescent framework [Me₂NH₂]₄[Zn₆(qptc)₃(trz)₄]·6H₂O (1) (H₄qptc = terphenyl-2,5,2'5'-tetracarboxylic acid, trz = 1,2,4-triazole) has been successfully synthesized, which features Zn₄(trz)₂ chain-based 3D anionic structure with channels filled by [Me₂NH₂]⁺ cations. It is worth noting that the material exhibits selective adsorption and recyclable detection of heavy-metal Cr³⁺ ion in aqueous solutions, which may be the synergy from the metal charge, bond ability of metal ions to carboxylate oxygen atom, and soft-hard acid-base properties. Furthermore, it can selectively sense of 2,4,6-trinitrophenol with a large quenching coefficient K_sv of 2.08 × 10⁶ M^-1.

How explosive TNP interacts with a small tritopic receptor: a combined crystallographic and thermodynamic approach

The interaction of explosive and pollutant TNP with the host receptor has been thoroughly explained and characterized by SCXRD and thermodynamic parameters.

Two fluorescein-based chemosensors for the fast detection of 2,4,6-trinitrophenol (TNP) in water

Two fluorescein-based chemosensors have been developed for the rapid and selective fluorescence detection of 2,4,6-trinitrophenol (TNP) under excitation by visible light.

Water-Soluble Nonconjugated Polymer Nanoparticles with Strong Fluorescence Emission for Selective and Sensitive Detection of Nitro-Explosive Picric Acid in Aqueous Medium

Water-soluble nonconjugated polymer nanoparticles (PNPs) with strong fluorescence emission were prepared from hyperbranched poly(ethylenimine) (PEI) and d-glucose via Schiff base reaction and self-assembly in aqueous phase. Preparation of the PEI-d-glucose (PEI-G) PNPs was facile (one-pot reaction) and environmentally friendly under mild conditions. Also, PEI-G PNPs showed a high fluorescence quantum yield in aqueous solution, and the fluorescence properties (such as concentration- and solvent-dependent fluorescence) and origin of intrinsic fluorescence were investigated and discussed. PEI-G PNPs were then used to develop a fluorescent probe for fast, selective, and sensitive detection of nitro-explosive picric acid (PA) in aqueous medium, because the fluorescence can be easily quenched by PA whereas other nitro-explosives and structurally similar compounds only caused negligible quenching. A wide linear range (0.05-70 μM) and a low detection limit (26 nM) were obtained. The fluorescence quenching mechanism was carefully explored, and it was due to a combined effect of electron transfer, resonance energy transfer, and inner filter effect between PA and PEI-G PNPs, which resulted in good selectivity and sensitivity for PA. Finally, the developed sensor was successfully applied to detection of PA in environmental water samples.

Recognition of halides and Y-shaped oxoanions by carbonylchromium-based urea-like molecules: A theoretical analysis of hydrogen bonding modes

One of the major challenges in anion recognition is to design hosts that can be used to distinguish between anions of different shapes. Urea-based molecules are widely used in anion recognition because the pair of -NH groups acts as an electron acceptor. Although these hosts can bind to both spherical anions (halides) and Y-shaped anions (oxoanions), experimental evidence to date does not provide a clear picture of what differences in the nature of the hydrogen bonding interactions could be used to distinguish between anions of different shapes. Here, we use several computational topology analyses to study the non-covalent interactions between Cr(CO)3-based organometallic urea-like hosts and halides and Y-shaped oxoanions. Our results suggest that the F(-) and AcO(-) anions are recognized experimentally due to a combination of strong interaction and large infrared (IR) shifts upon complexation, verifying the remarkable IR-reporting ability of the Cr(CO)3 moiety and its potential applications in anion recognition. The lone pairs of the oxygen atom in Y-shaped oxoanions directly interact with the -NH groups of the hosts, while all the shell electrons of the halides participate as a group in the interaction; however, the relative contributions of electrostatic and charge-transfer interactions are quite similar for the two types of anions. This insight into the nature of the anion-host interactions can be used to provide guidance for the design of hosts that differentiate between anions.

A gallic acid–succinimide co-crystal landscape: polymorphism, pseudopolymorphism, variable stoichiometry co-crystals and concomitant growth of non-solvated and solvated co-crystals

A design aspect for selective formation of diverse solid forms such as solvates, hydrates and anhydrous forms has been successfully investigated in a gallic acid–succinimide co-crystal landscape.

A sensor based on blue luminescent graphene quantum dots for analysis of a common explosive substance and an industrial intermediate, 2,4,6-trinitrophenol

A rapid and effective sensor for the analysis of nitrophenol-based explosive substances, represented by trinitrophenol (TNP), has been developed with the use of the blue luminescent graphene quantum dots (GQDs); these GQDs are derived from citric acid by a pyrolysis procedure. They emit strong blue fluorescence at 450 nm after excitation at 365 nm, and TNP can quench this fluorescence because a fluorescence resonance energy transfer occurs. The quenching ratio (F0-F)/F0 was related linearly to the concentration of TNP in the range of 0.1-15 μmol L(-1) with a detection limit of 0.091 μmol L(-1) (S/N=3). The developed method exhibits high sensitivity, good linearity and reliable reproducibility for the quantitative analysis of TNP in water samples. The GQDs were used directly without any further treatment or complicated modification.

A terbium(III)-complex-based on-off fluorescent chemosensor for phosphate anions in aqueous solution and its application in molecular logic gates

A new Tb(III) complex based on a tripodal carboxylate ligand has been synthesized for the selective fluorescent recognition of phosphate anions, including inorganic phosphates and nucleoside phosphates (e.g., ATP), in Tris buffer solution. The resulting L · Tb complex shows the characteristic emission bands centered at about 495 and 550 nm from the Tb(III)-centered (5)D4 excited state to (7)FJ transitions with J = 6 and 5, where the chelating ligand acts only as an "antenna". Upon the addition of phosphate anions to the aqueous solution of Tb(III) complex, significant "on-off" fluorescence changes were observed, which were attributed to the inhibition of the "antenna" effect between the ligand and Tb(III) after the incorporation of phosphate anions. Furthermore, this unique Tb(III) complex has been successfully utilized to detect phosphate anions with filter papers and hydrogels. Notably, the Tb(III) complex also can be used for the construction of molecular logic gates with TRANSFER and INHIBIT logic functions by using the above fluorescence changes.

A facile synthesis of highly luminescent nitrogen-doped graphene quantum dots for the detection of 2,4,6-trinitrophenol in aqueous solution

A facile bottom-up method for the synthesis of highly fluorescent nitrogen-doped graphene quantum dots (N-GQDs) has been developed via a one-step pyrolysis of citric acid and tris(hydroxymethyl)aminomethane. The obtained N-GQDs emitted strong blue fluorescence under 365 nm UV light excitation with a high quantum yield of 59.2%. They displayed excitation-independent behavior, high resistance to photobleaching and high ionic strength. In addition to the good linear relationship between the fluorescence intensity of the N-GQDs and pH in the range 2-7, the fluorescence intensity of the N-GQDs could be greatly quenched by the addition of a small amount of 2,4,6-trinitrophenol (TNP). A sensitive approach has been developed for the detection of TNP with a detection limit of 0.30 μM, and a linearity ranging from 1 to 60 μM TNP could be obtained. The approach was highly selective and suitable for TNP analysis in natural water samples.