Reduced Graphene Oxide-Ag3 PO4 Heterostructure: A Direct Z-Scheme Photocatalyst for Augmented Photoreactivity and Stability

Poly Meta-Aminophenol (PmAP) as a Solid-State Electron Mediator in the Z-Scheme, Ag3PO4/CoFe2O4 Heterojunction: Mineralization of Highly Concentrated Bisphenol-A and Reactive Dyes Water Pollutants

This study demonstrated the effectiveness of poly meta-aminophenol (PmAP) as a solid electron mediator in the Z-scheme photocatalytic system for organic pollutants (viz. bisphenol-A and reactive dyes) mineralization and also illustrated how PmAP transported the photogenerated electrons from an O2-emitting photocatalyst (Ag3PO4) to a H2-emitting photocatalyst (CoFe2O4) enabling enhanced photocatalytic activity under visible light irradiation. The PmAP/Ag3PO4-CoFe2O4 (PAC-10), was prepared by a two-step process and characterized by various analytical methods to assess the impact of PmAP on optical, photocatalytic, and electrochemical characteristics of the CoFe2O4 (CFO)/Ag3PO4 composite. The morphological investigation revealed that the PmAP sheet was nicely decorated with evenly distributed Ag3PO4 and CoFe2O4 particles. The M-S plot and impedance analyses were used to assess the electrochemical capabilities of the catalyst. Z-scheme charge transfer pathways were well supported by the radical trapping experiment and HRTEM analysis of Pt photodeposited PAC-10 photocatalysts during the photoreaction. Because of its magnetic nature and ease of synthesis, the PAC-10 offers an easily recyclable Z-scheme photocatalytic system that has the potential for purifying wastewater with high concentrations (up to 100 mg/L) of organic pollutants within 30 min of visible light exposition.

Enhanced Photostability and Photoactivity of Ruthenium Polypyridyl-Based Photocatalysts by Covalently Anchoring Onto Reduced Graphene Oxide

Recentstudies toward finding more efficient ruthenium metalloligands for photocatalysis applications have shown that the derivatives of the linear [Ru(dqp)2]2+ (dqp: 2,6-di(quinolin-8-yl)-pyridine) complexes hold significant promise due to their extended emission lifetime in the μs time scale while retaining comparable redox potential, extinction coefficients, and absorption profile in the visible region to [Ru(bpy)3]2+ (bpy: 2,2'-bipyridine) and [Ru(tpy)2]2+ (tpy: 2,2':6',2″-terpyridine) complexes. Nevertheless, its photostability in aqueous solution needs to be improved for its widespread use in photocatalysis. Carbon-based supports have arisen as potential solutions for improving photostability and photocatalytic activity, yet their effect greatly depends on the interaction of the metal complex with the support. Herein, we present a strategy for obtaining Ru-polypyridyl complexes covalently linked to aminated reduced graphene oxide (rGO) to generate novel materials with long-term photostability and increased photoactivity. Specifically, the hybrid Ru(dqp)@rGO system has shown excellent photostable behavior during 24 h of continual irradiation, with an enhancement of 10 and 15% of photocatalytic dye degradation in comparison with [Ru(dqp)2]2+ and Ru(tpy)@rGO, respectively, as well as remarkable recyclability. The presented strategy corroborates the potential of [Ru(dqp)2]2+ as an interesting photoactive molecule to produce more advantageous light-active materials by covalent attachment onto carbon-based supports.

GQD@NiFe-LDH Nanosheets for Photocatalytic Activity towards Textile Dye Degradation via Lattice Contraction

The functionalized NiFe-LDH with photosensitized GQDs were synthesized through the hydrothermal route by differing the amount of GQDs solution and studied its efficacy towards the mineralization of textile dyes under visible light. The synthesized samples were characterized by XRD, FESEM, HRTEM, DRUV-Vis, RAMAN, XPS, and BET. The combined effect of the hexagonal carbon lattice in GQD and open layered porous structure of NiFe-LDH nanosheets results in the contraction of the lattice. Different reactive and conventional dyes were taken as representative dyes to evaluate the activity of the as-synthesized photocatalysts. The enhanced electron absorption/donor effect between GQDs and NiFe-LDH, and the growth of oxygen-bridged Ni/Fe-C moieties enable the composite to exhibit better photocatalytic activity. Both photocatalytic activity and characterization results confirmed that the GQD@NiFe-LDH nanocomposite heterostructure synthesized at 160 °C by taking 10 mL of GQDs aqueous solution named GNFLDH10 has a higher degree of crystallinity and has the best photocatalytic efficiency compared to other reported visible light catalysts. Specifically, the above optimized GQD@NiFe-LDH photocatalyst is capable of photo-mineralizing 50 ppm of Reactive Green in 20 min, Reactive Red in 20 min, and Congo Red in 25 min respectively following a direct Z-scheme mechanism with substantial reusability.

Photocatalytic Z-Scheme Overall Water Splitting: Recent Advances in Theory and Experiments

Photocatalytic water splitting is considered one of the most important and appealing approaches for the production of green H₂ to address the global energy demand. The utmost possible form of artificial photosynthesis is a two-step photoexcitation known as "Z-scheme", which mimics the natural photosystem. This process solely relies on the effective coupling and suitable band positions of semiconductors (SCs) and redox mediators for the purpose to catalyze the surface chemical reactions and significantly deter the backward reaction. In recent years, the Z-scheme strategies and their key role have been studied progressively through experimental approaches. In addition, theoretical studies based on density functional theory have provided detailed insight into the mechanistic aspects of some breathtakingly complex problems associated with hydrogen evolution reaction and oxygen evolution reaction. In this context, this critical review gives an overview of the fundamentals of Z-scheme photocatalysis, including both theoretical and experimental advancements in the field of photocatalytic water splitting, and suggests future perspectives.

Graphene/silver-based composites and coating on dead coral for degradation of organic pollution using the Z-scheme mechanism

A high-performance photocatalytic nanocomposite consisting of silver phosphate-based particles with GO and RGO was synthesized by co-precipitation and hydrothermal methods. Ag₃PO₄ was prepared by a co-precipitation method. The as-prepared Ag₃PO₄ nanocomposites were characterized by different analyses. The results demonstrated that the Ag₃PO₄ particles were well dispersed on the graphene-based surfaces. The photocatalytic performance of the GO/RGO/Ag₃PO₄ nanocomposite was evaluated for the photodegradation of methylene blue (MB) under exposure to visible light (xenon lamp λ > 400 nm). The degradation rate was about 98% in 5 min. The enhancement in photocatalytic performance is attributed to the simultaneous presence of RGO and GO, which show significantly high absorption of organic molecules on the surface of GO/RGO, allowing the effective transfer and separation of photogenerated electrons. In addition, this modified structure can be in situ synthesized on dead coral structures that can be used in future real case-studies of the degradation of other organic pollutants. The ingredient of these composites, however, is about 93% Ag₃PO₄.

A high-performance photocatalytic nanocomposite consisting of silver phosphate-based particles with GO and RGO was synthesized by co-precipitation and hydrothermal methods.

Repercussion of Solid state vs. Liquid state synthesized p-n heterojunction RGO-copper phosphate on proton reduction potential in water

The same copper phosphate catalysts were synthesized by obtaining the methods involving solid state as well as liquid state reactions in this work. And then the optimised p-n hybrid junction photocatalysts have been synthesized following the same solid/liquid reaction pathways. The synthesized copper phosphate photocatalyst has unique rod, flower, caramel-treat-like morphology. The Mott-Schottky behavior is in accordance with the expected behavior of n-type semiconductor and the carrier concentration was calculated using the M-S analysis for the photocatalyst. And for the p-n hybrid junction of 8RGO-Cu₃(PO₄)₂-PA (PA abbreviated for photoassisted synthesis method), 8RGO-Cu₃(PO₄)₂-EG(EG abbreviated for Ethylene Glycol based synthesis method), 8RGO-Cu₃(PO₄)₂-PEG (PEG abbreviated for Poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol based synthesis method)the amount of H₂ synthesized was 7500, 6500 and 4500 µmol/h/g, respectively. The excited electrons resulting after the irradiation of visible light on the CB of p-type reduced graphene oxide (RGO) migrate easily to n-type Cu₃(PO₄)₂ via. the p-n junction interfaces and hence great charge carrier separation was achieved.

Z-scheme Ag3PO4/POM/GO heterojunction with enhanced photocatalytic performance for degradation and water splitting

To develop solar light-driven photocatalysts with high activity and structural stability, Ag₃PO₄/POM/GO heterojunction has been successfully prepared by a facile method at room temperature.

Fabrication of Ag3PO4/GO/NiFe2O4 composites with highly efficient and stable visible-light-driven photocatalytic degradation of rhodamine B

Effective visible-light-driven Ag₃PO₄/GO/NiFe₂O₄Z-scheme magnetic composites were successfully fabricated by a simple ion-exchange deposition method. The Ag₃PO₄/GO/NiFe₂O₄ (8%) composite exhibited excellent photocatalytic activity (degradation efficiency was ∼96% within 15 min and kinetic constant reached 0.1956 min⁻¹) and stability when compared to Ag₃PO₄, NiFe₂O₄, and Ag₃PO₄/NiFe₂O₄ for rhodamine B (RhB) degradation. Furthermore, by electrochemical and fluorescence measurements, the Ag₃PO₄/GO/NiFe₂O₄ (8%) material also showed larger transient photocurrent, lower impedance, and longer fluorescence lifetime (7.82 ns). Comparing the activity result dependence with characterization results, it was indicated that photocatalytic activity depended on fast charge transfer from Ag₃PO₄ to NiFe₂O₄ through GO sheet. The h⁺ and ·O₂⁻ species played important roles in RhB degradation under visible-light. A possible Z-scheme mechanism is proposed over the Ag₃PO₄/GO/NiFe₂O₄ (8%) composite. This study might provide a promising visible light responsive photocatalyst for the photocatalytic degradation of organic dyes in wastewater.

Effective visible-light-driven Ag₃PO₄/GO/NiFe₂O₄Z-scheme magnetic composites were successfully fabricated by a simple ion-exchange deposition method. The composites exhibited excellent photocatalytic activity and stability for RhB degradation.

Highly efficient photocatalytic activity of Ag3PO4/Ag/ZnS(en)0.5 photocatalysts through Z-scheme photocatalytic mechanism

A novel Z-scheme Ag₃PO₄/Ag/ZnS(en)_0.5 composite material was successfully prepared via a facile hydrothermal method and in situ precipitation.

3 D Co3 (PO4 )2 -Reduced Graphene Oxide Flowers for Photocatalytic Water Splitting: A Type II Staggered Heterojunction System

The design, synthesis, and photoelectrochemical characterization of Co₃ (PO₄ )₂ , a hydrogen evolving catalyst modified with reduced graphene oxide (RGO), is reported. The 3 D flowerlike Co₃ (PO₄ )₂ heterojunction system, consisting of 3 D flowerlike Co₃ (PO₄ )₂ and RGO sheets, was synthesized by a one-pot in situ photoassisted method under visible-light irradiation, which was achieved without the addition of surfactant or a structure-directing reagent. For the first time, Co₃ (PO₄ )₂ is demonstrated to act as a hydrogen evolving catalyst rather than being used as an oxygen evolving photoanode. In particular, 3 D flowerlike Co₃ (PO₄ )₂ anchored to RGO nanosheets is shown to possess dramatically improved photocatalytic activity. This enhanced photoactivity is mainly due to the staggered type II heterojunction system, in which photoinduced electrons from 3 D flowerlike Co₃ (PO₄ )₂ transfer to the RGO sheets and result in decreased charge recombination, as evidenced by photoluminescence spectroscopy. The band gap of Co₃ (PO₄ )₂ was calculated to be 2.35 eV by the Kubelka-Munk method. Again, the Co₃ (PO₄ )₂ semiconductor displays n-type behavior, as observed from Mott-Schottky measurements. These RGO-Co₃ (PO₄ )₂ conjugates are active in the visible range of solar light for water splitting and textile dye degradation, and can be used towards the development of greener and cheaper photocatalysts by exploiting solar light.