Water‐stable Adenine‐based MOFs with Polar Pores for Selective CO 2 Capture

A novel S,N-rich MOF for efficient recovery of Au(III): Performance and mechanism

A novel S,N-rich MOF with adenine and 4,4'-thiodiphenol as organic ligands was synthesized via the one-step solvothermal method, and used for gold recovery. The pH impact, adsorption kinetics, isotherms, thermodynamics, selectivity, and reusability were investigated accordingly. The adsorption and desorption mechanism were also explored comprehensively. The electronic attraction, coordination, and in situ redox account for the Au(III) adsorption. The Au(III) adsorption is affected strongly by the pH of solutions, and best at pH of 2.57. The MOF exhibits exceptional adsorption capacity as high as 3680 mg/g at 55 °C, fast kinetics with 8 min for 9.6 mg/L Au(III), and excellent selectivity for gold ion in real e-waste leachates. The adsorption process of gold on the adsorbent is endothermic and spontaneous, and influenced visibly by temperature. The adsorption ratio still maintained 99% after seven adsorption-desorption cycles. The column adsorption experiments show that the MOF has outstanding selectivity for Au(III) with 100% of removal efficiency in a complex solution containing Au, Ni, Cu, Cd, Co, and Zn ions. A glorious adsorption with a breakthrough time of 532 mins was obtained for the breakthrough curve. This study not only provides an efficient adsorbent for gold recovery, but also guidance for designing new materials.

Metal-Organic Frameworks for Greenhouse Gas Applications

Using petrol to supply energy for a car or burning coal to heat a building generates plenty of greenhouse gas (GHG) emissions, including carbon dioxide (CO₂ ), water vapor (H₂ O), methane (CH₄ ), nitrous oxide (N₂ O), ozone (O₃ ), fluorinated gases. These up-and-coming metal-organic frameworks (MOFs) are structurally endowed with rigid inorganic nodes and versatile organic linkers, which have been extensively used in the GHG-related applications to improve the lives and protect the environment. Porous MOF materials and their derivatives have been demonstrated to be competitive and promising candidates for GHG separation, storage and conversions as they shows facile preparation, large porosity, adjustable nanostructure, abundant topology, and tunable physicochemical property. Enormous progress has been made in GHG storage and separation intrinsically stemmed from the different interaction between guest molecule and host framework from MOF itself in the recent five years. Meanwhile, the use of porous MOF materials to transform GHG and the influence of external conditions on the adsorption performance of MOFs for GHG are also enclosed. In this review, it is also highlighted that the existing challenges and future directions are discussed and envisioned in the rational design, facile synthesis and comprehensive utilization of MOFs and their derivatives for practical applications.

DNA-Mimicking Metal-Organic Frameworks with Accessible Adenine Faces for Complementary Base Pairing

Biologically derived metal-organic frameworks (Bio-MOFs) are significant, as they can be used in cutting-edge biomedical applications such as targeted gene delivery. Herein, adenine (Ade) and unnatural amino acids coordinate with Zn²⁺ to produce biocompatible frameworks, KBM-1 and KBM-2, with extremely defined porous channels. They feature an accessible Watson-Crick Ade face that is available for further hydrogen bonding and can load single-stranded DNA (ssDNA) with 13 and 41% efficiency for KBM-1 and KBM-2, respectively. Treatment of these frameworks with thymine (Thy), as a competitive guest for base pairing with the Ade open sites, led to more than 50% reduction of ssDNA loading. Moreover, KBM-2 loaded Thy-rich ssDNA more efficiently than Thy-free ssDNA. These findings support the role of the Thy-Ade base pairing in promoting ssDNA loading. Furthermore, theoretical calculations using the self-consistent charge density functional tight-binding (SCC-DFTB) method verified the role of hydrogen bonding and van der Waals type interactions in this host-guest interface. KBM-1 and KBM-2 can protect ssDNA from enzymatic degradation and release it at acidic pH. Most importantly, these biocompatible frameworks can efficiently deliver genetic cargo with retained activity to the cell nucleus. We envisage that this class of Bio-MOFs can find immediate applicability as biomimics for sensing, stabilizing, and delivering genetic materials.

Metal-biomolecule frameworks (BioMOFs): a novel approach for "green" optoelectronic applications

In this study, a water-stable microcrystalline bioMOF was synthesized, characterized, and loaded with silver ions or highly emissive rare earth (RE) metals such as Eu3+/Tb3+. The obtained materials were used as active layers in a proof-of-concept sustainable light-emitting device, highlighting the potential of bioMOFs in optoelectronic applications.

Coordination flexibility aided CO2-specific gating in an Iron Isonicotinate MOF

Coordination flexibility assisted porosity has been introduced into an Iron-isonicotinate metal organic framework (MOF), (Fe(4-PyC) 2 .(OH). The framework showed CO 2 -specific gate opening behavior, which gets tuned as a function of temperature and pressure. The MOF's physisorptive porosity towards CO 2 , CH 4 , and N 2 was investigated; it adsorbed only CO 2 via a gate opening phenomenon. The isonicotinate, representing a borderline soft base, is bound to the hard Fe 3+ centre through monodentate carboxylate and pyridyl nitrogen. This moderately weak binding enables isonicotinate to spin like a spindle under the CO 2 pressure opening the gate for a sharp increase in CO 2 uptake at 333 mmHg (At 298K, the CO 2 uptake increases from 0.70 to 1.57 mmol/g). We investigated the MOF's potential for CO 2 /N 2 and CO 2 /CH 4 gas separation aided by this gating. IAST model reveals that the CO 2 /N 2 selectivity jumps from 325 to 3131 when the gate opens, while the CO 2 /CH 4 selectivity increases three times. Interestingly, this Fe-isonicotinate MOF did not follow the trend set by our earlier reported Hard-Soft Gate Control (established for isostructural M 2+ -isonicotinate MOFs (M = Mg, Mn)). However, we account for this discrepancy using the different oxidation state of metals confirmed by X-ray photoelectron spectroscopy and magnetism.

In Silico Tuning of the Pore Surface Functionality in Al-MOFs for Trace CH3I Capture

Aluminum (Al)-based metal-organic frameworks (MOFs) have been shown to have good stability toward γ irradiation, making them promising candidates for durable adsorbents for capturing volatile radioactive nuclides. In this work, we studied a series of existing Al-MOFs to capture trace radioactive organic iodide (ROI) from a gas composition (100 ppm CH₃I, 400 ppm CO₂, 21% O₂, and 78% N₂) resembling the off-gas composition from reprocessing the used nuclear fuel using Grand canonical Monte Carlo (GCMC) simulations and density functional theory (DFT) calculations. Based on the results and understanding established from studying the existing Al-MOFs, we proceed by functionalizing the top-performing CAU-11 with different functional groups to propose better MOFs for ROI capture. Our study suggests that extraordinary ROI adsorption and separation capability could be realized by -SO₃H functionalization in CAU-11. It was mainly owing to the joint effect of the enhanced pore surface polarity arising from -SO₃H functionalization and the μ-OH group of CAU-11.

Deciphering the Weak CO2···Framework Interactions in Microporous MOFs Functionalized with Strong Adsorption Sites-A Ubiquitous Observation

Carbon capture from industrial effluents such as flue gas or natural gas mixture (cf. landfill gas), the primary sources of CO₂ emission, greatly aids in balancing the environmental carbon cycle. In this context, the most energy-efficient physisorptive CO₂ separation process can benefit immensely from improved porous sorbents. Metal organic frameworks (MOFs), especially the ultramicroporous MOFs, built from readily available small and rigid ligands, are highly promising because of their high selectivity (CO₂/N₂) and easy scalability. Here, we report two new ultramicroporous Co-adeninato isophthalate MOFs. They concomitantly carry basic functional groups (-NH₂) and Lewis acidic sites (coordinatively unsaturated Co centers). They show good CO₂ capacity (3.3 mmol/g at 303 K and 1 bar) along with high CO₂/N₂ (∼600 at 313 K and 1 bar and ∼340 at 303 K and 1 bar) selectivity, working capacity, and smooth diffusion kinetics (D_c = 7.5 × 10^-9 m² s^-1). The MOFs exhibit good CO₂/N₂ kinetic separation under both dry and wet conditions with a smooth breakthrough profile. Despite their well-defined CO₂ adsorption sites, these MOFs exhibit only a moderately strong interaction with CO₂ as evidenced from their HOA values. This counterintuitive observation is ubiquitous among many MOFs adorned with strong CO₂ adsorption sites. To gain insights, we have identified the binding sites for CO₂ using simulation and MD studies. The radial distribution function analysis reveals that despite the amine and bare-metal sites, the pore size and the pore structure determine the positions for the CO₂ molecules. The most favorable sites become the confined spaces lined by aromatic rings. A plausible explanation for the lack of strong adsorption in these MOFs is premised from these collective studies, which could aid in the future design of superior CO₂ sorbents.

Understanding the Effect of Water on CO2 Adsorption

Carbon capture from large sources and ambient air is one of the most promising strategies to curb the deleterious effect of greenhouse gases. Among different technologies, CO₂ adsorption has drawn widespread attention mostly because of its low energy requirements. Considering that water vapor is a ubiquitous component in air and almost all CO₂-rich industrial gas streams, understanding its impact on CO₂ adsorption is of critical importance. Owing to the large diversity of adsorbents, water plays many different roles from a severe inhibitor of CO₂ adsorption to an excellent promoter. Water may also increase the rate of CO₂ capture or have the opposite effect. In the presence of amine-containing adsorbents, water is even necessary for their long-term stability. The current contribution is a comprehensive review of the effects of water whether in the gas feed or as adsorbent moisture on CO₂ adsorption. For convenience, we discuss the effect of water vapor on CO₂ adsorption over four broadly defined groups of materials separately, namely (i) physical adsorbents, including carbons, zeolites and MOFs, (ii) amine-functionalized adsorbents, and (iii) reactive adsorbents, including metal carbonates and oxides. For each category, the effects of humidity level on CO₂ uptake, selectivity, and adsorption kinetics under different operational conditions are discussed. Whenever possible, findings from different sources are compared, paying particular attention to both similarities and inconsistencies. For completeness, the effect of water on membrane CO₂ separation is also discussed, albeit briefly.

Cobalt-Based Metal-Organic Frameworks for Adsorption of CO2 and C2 Hydrocarbons: Effect of Auxiliary Ligands with Different Functional Groups

Recently, metal-organic frameworks (MOFs) have been investigated as potential materials for CO₂ capture and light hydrocarbon storage/separation due to their high porosity, large surface area, and tunable skeleton structures. In this work, the six cobalt-based MOFs 1-6 were successfully synthesized under solvothermal conditions by a mixed-ligand strategy. 1 and 2 have the same framework structure with a topology of {4²·5}₂{4⁴·5¹⁰·6⁷·7⁶·8}, while the structures of the 3-6 frameworks are the same with a topology of {4²·5}₂{4⁴·5¹⁰·6⁹·7⁴·8}. The adsorption properties of these MOFs for CO₂ and C₂ hydrocarbons were then investigated, and the effect of the functional groups was discussed. The results revealed that the introduction of amino and bromo groups could effectively strengthen the adsorption performance.

Chemisorption of hydrogen sulfide over copper-based metal–organic frameworks: methanol and UV-assisted regeneration

H₂S adsorption and regeneration of Cu-based MOFs.