Progress in Core-Shell Magnetic Mesoporous Materials for Enriching Post-Translationally Modified Peptides

Endogenous peptides, particularly those with post-translational modifications, are increasingly being studied as biomarkers for diagnosing various diseases. However, they are weakly ionizable, have a low abundance in biological samples, and may be interfered with by high levels of proteins, peptides, and other macromolecular impurities, resulting in a high limit of detection and insufficient amounts of post-translationally modified peptides in real biological samples to be examined. Therefore, separation and enrichment are necessary before analyzing these biomarkers using mass spectrometry. Mesoporous materials have regular adjustable pores that can eliminate large proteins and impurities, and their large specific surface area can bind more target peptides, but this may result in the partial loss or destruction of target peptides during centrifugal separation. On the other hand, magnetic mesoporous materials can be used to separate the target using an external magnetic field, which improves the separation efficiency and yield. Core-shell magnetic mesoporous materials are widely utilized for peptide separation and enrichment due to their biocompatibility, efficient enrichment capability, and excellent recoverability. This paper provides a review of the latest progress in core-shell magnetic mesoporous materials for enriching glycopeptides and phosphopeptides and compares their enrichment performance with different types of functionalization methods.

Efficient solid- and solution-state emissive reusable solvatochromic fluorophores for colorimetric and fluorometric detection of CN. Analyst 2024;149:1557-1570. [PMID: 38284868 DOI: 10.1039/d3an01697h] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

In this work, a novel organic receptor, CPI [(E)-3-(4-(9H-carbazol-9-yl)phenyl)-2-(1H-benzo[d]imidazol-2-yl)acrylonitrile], was rationally designed and successfully fabricated for selective and sole recognition of CN- ions over other competitive anions through an obvious chromogenic and ratiometric emission change in DMSO. The distinct and prominent color change upon the addition of CN- can be attributed to the typical ICT process, which is induced by the deprotonation of acidic NH protons in the imidazole moiety. The sensor displayed strong solvatochromic effects in commonly used organic solvents such as n-hexane, toluene, diethyl ether, DCM, THF, DMF and DMSO. The chemical structure of the sensor was characterized by single-crystal X-ray diffraction, 1HNMR, 13CNMR, IR and mass spectroscopy. Significantly, the probe can function as a fluorescence-based sensor for the efficient detection of low-level water in organic solvents. The solid-state emission properties of CPI were successfully applied to recognise cyanide in a solid-state platform with naked eye-visualized distinct color change. The probe can be made reusable by adding TFA into the CN- treated probe solution. The detection limit of CPI towards CN- was determined to be 4.48 × 10-8 M. More importantly, the sensor is capable of detecting CN- in food samples and has been employed for wastewater treatment. Besides, easy-to-prepare CPI-coated test strips provide a simple, reusable and easy-to-handle protocol for the qualitative identification of CN- conveniently. Finally, density functional theory and time-dependent density functional theory were performed to verify the experimental outcomes theoretically.

Preparation and application of UPLC silica microsphere stationary phase:A review

In this review, microspheres for ultra-performance liquid chromatography (UPLC) were reviewed in accordance with the literature in recent years. As people's demands for chromatography are becoming more and more sophisticated, the preparation and application of UPLC stationary phases have become the focus of researchers in this field. This new analytical separation science not only maintains the practicality and principle of high-performance liquid chromatography (HPLC), but also improves the step function of chromatographic performance. The review presents the morphology of four types of sub-2 μm silica microspheres that have been used in UPLC, including non-porous silica microspheres (NPSMs), mesoporous silica microspheres (MPSMs), hollow silica microspheres (HSMs) and core-shell silica microspheres (CSSMs). The preparation, pore control and modification methods of different microspheres are introduced in the review, and then the applications of UPLC in drug analysis and separation, environmental monitoring, and separation of macromolecular proteins was presented. Finally, a brief overview of the existing challenges in the preparation of sub-2 μm microspheres, which required further research and development, was given.

Dendritic mesoporous nanoparticles for the detection, adsorption, and degradation of hazardous substances in the environment: State-of-the-art and future prospects

Equipped with hierarchical pores and three-dimensional (3D) center-radial channels, dendritic mesoporous nanoparticles (DMNs) make their pore volumes extremely large, specific surface areas super-high, internal spaces especially accessible, and so on. Other entities (like organic moieties or nanoparticles) can be modified onto the interfaces or skeletons of DMNs, accomplishing their functionalization for desirable applications. This comprehensive review emphasizes on the design and construction of DMNs-based systems which serve as sensors, adsorbents and catalysts for the detection, adsorption, and degradation of hazardous substances, mainly including the construction procedures of brand-new DMNs-based materials and the involved hazardous substances (like industrial chemicals, chemical dyes, heavy metal ions, medicines, pesticides, and harmful gases). The sensitive, adsorptive, or catalytic performances of various DMNs have been compared; correspondingly, the reaction mechanisms have been revealed strictly. It is honestly anticipated that the profound discussion could offer scientists certain enlightenment to design novel DMNs-based systems towards the detection, adsorption, and degradation of hazardous substances, respectively or comprehensively.

Highly Efficient Removal of Uranium from an Aqueous Solution by a Novel Phosphonic Acid-Functionalized Magnetic Microsphere Adsorbent

The development of adsorption materials which can efficiently isolate and enrich uranium is of great scientific significance to sustainable development and environmental protection. In this work, a novel phosphonic acid-functionalized magnetic microsphere adsorbent Fe₃O₄/P (GMA-MBA)-PO₄ was developed by functionalized Fe₃O₄/P (GMA-MBA) prepared by distill-precipitation polymerization with O-phosphoethanolamine. The adsorption process was endothermic, spontaneous and kinetically followed the pseudo second-order model. The maximum uranium adsorption capacity obtained from the Langmuir model was 333.33 mg g^-1 at 298 K. In addition, the adsorbent also had good acid resistance and superparamagnetic properties, which could be quickly separated by a magnetic field. XPS analysis showed that the adsorption of adsorbent mainly depended on the complexation of phosphonic acid group with uranium. This work offers a promising candidate for the application of magnetic adsorbents in the field of uranium separation and enrichment.

Recent Application of Core-Shell Nanostructured Catalysts for CO2 Thermocatalytic Conversion Processes

Carbon-intensive industries must deem carbon capture, utilization, and storage initiatives to mitigate rising CO₂ concentration by 2050. A 45% national reduction in CO₂ emissions has been projected by government to realize net zero carbon in 2030. CO₂ utilization is the prominent solution to curb not only CO₂ but other greenhouse gases, such as methane, on a large scale. For decades, thermocatalytic CO₂ conversions into clean fuels and specialty chemicals through catalytic CO₂ hydrogenation and CO₂ reforming using green hydrogen and pure methane sources have been under scrutiny. However, these processes are still immature for industrial applications because of their thermodynamic and kinetic limitations caused by rapid catalyst deactivation due to fouling, sintering, and poisoning under harsh conditions. Therefore, a key research focus on thermocatalytic CO₂ conversion is to develop high-performance and selective catalysts even at low temperatures while suppressing side reactions. Conventional catalysts suffer from a lack of precise structural control, which is detrimental toward selectivity, activity, and stability. Core-shell is a recently emerged nanomaterial that offers confinement effect to preserve multiple functionalities from sintering in CO₂ conversions. Substantial progress has been achieved to implement core-shell in direct or indirect thermocatalytic CO₂ reactions, such as methanation, methanol synthesis, Fischer-Tropsch synthesis, and dry reforming methane. However, cost-effective and simple synthesis methods and feasible mechanisms on core-shell catalysts remain to be developed. This review provides insights into recent works on core-shell catalysts for thermocatalytic CO₂ conversion into syngas and fuels.

Novel Magnetically-Recoverable Solid Acid Catalysts with a Hydrophobic Layer in Protecting the Active Sites from Water Poisoning

Three novel magnetically-recoverable solid acid catalysts (hydrophobic catalysts Fe3O4@SiO2-Me&PrSO3H, Fe3O4@SiO2-Oc&PrSO3H and hydrophilic catalyst Fe3O4@SiO2-PrSO3H) were synthesized by introducing organic propylsulfonic acid and alkyl groups to Fe3O4@SiO2 nanocomposites. We characterized these catalysts by FT-IR, EDS, XRD, VSM and SEM, and found that they had excellent core-shell structure and magnetic responsiveness. We also explored the impact of surface hydrophobicity on activity and stability of catalysts in ethyl acetate (EAC) synthesis reaction. The results indicated that: for reactivity and reusability, Fe3O4@SiO2-Oc&PrSO3H > Fe3O4@SiO2-Me&PrSO3H > Fe3O4@SiO2-PrSO3H. This was because octyl and methyl groups could build a hydrophobic layer on the surfaces of Fe3O4@SiO2-Oc&PrSO3H and Fe3O4@SiO2-Me&PrSO3H, and this could effectively prevent water molecules from poisoning active sites; the hydrophobicity of octyl was stronger than methyl. Fe3O4@SiO2-Oc&PrSO3H also showed higher catalytic activity in the external aqueous reaction system, which indicated that it had good water toleration. Moreover, we could easily separate Fe3O4@SiO2-Oc&PrSO3H from the reaction mixture with an external magnetic field, in the meanwhile, its reactivity could still remain above 80% after reusing 6 times.

Transient Behavior of CO and CO2 Hydrogenation on Fe@SiO2 Core–Shell Model Catalysts—A Stoichiometric Analysis of Experimental Data

The hydrogenation of CO and CO2 from industrial exhaust gases into CH4 represents a promising method for sustainable chemical energy storage. While iron-based catalysts are in principle suitable for that purpose, the active metal Fe undergoes a complex transformation during the chemical reaction process. However, only little is known about the change in catalytically active species under reaction conditions, primarily caused by structural changes in the catalyst material, so far. By using core–shell model materials, factors that alter the catalyst structure can be excluded, making it possible to observe the direct influence of the reactants on the activity in the present work. Furthermore, stoichiometric analysis was used as a key tool for the evaluation of individual key reactions in the complex reaction network purely from experimental data, thus making it possible to draw conclusions about the catalyst state. In the case of CO hydrogenation, the presumed Boudouard reaction and the associated carburization of the catalyst can be quantified and the main reaction (CO methanation) can be determined. The results of the CO2 hydrogenation showed that the reverse water–gas shift reaction mainly took place, but under an ongoing change in the catalytic active iron phase. Due to the systematic exchange between CO and CO2 in the reactant gas stream, a mutual influence could also be observed. The results from the stoichiometric analysis provide the basis for the development of kinetic models for the key reactions in future work.

Nanoscale Drug Delivery Systems in Glioblastoma

Glioblastoma is the most aggressive cerebral tumor in adults. However, the current pharmaceuticals in GBM treatment are mainly restricted to few chemotherapeutic drugs and have limited efficacy. Therefore, various nanoscale biomaterials that possess distinct structure and unique property were constructed as vehicles to precisely deliver molecules with potential therapeutic effect. In this review, nanoparticle drug delivery systems including CNTs, GBNs, C-dots, MOFs, Liposomes, MSNs, GNPs, PMs, Dendrimers and Nanogel were exemplified. The advantages and disadvantages of these nanoparticles in GBM treatment were illustrated.

Magnetic mesoporous nanomaterials with AIE properties for selective detection and removal of CN- from water under magnetic conditions

We have prepared a type of magnetic mesoporous nanomaterial with aggregation-induced emission properties (Fe₃O₄@mSiO₂@TPA@BA, hence abbr. FSTB) to detect and remove cyanide ions (CN^-) under magnetic conditions. FSTB has a large specific surface area and improved fluorescence performance to identify CN^-, and its superparamagnetic behavior plays an important role in removing CN^-. The magnetic sensor FSTB shows excellent selectivity and anti-interference for the detection of CN^- in aqueous solutions. It is obvious from the equation LOD = 3δ/S that the limit of detection (LOD) of FSTB for CN^- is significantly lower than the permissible level of CN^- in drinkable water recommended by the World Health Organization. Therefore, the magnetic sensor FSTB has a wide range of applications for detecting and removing harmful CN^-.

[Preparation of luminescent silica nanoparticles with immobilized metal ion affinity for labeling phosphorylated proteins in Western Blot]

Protein phosphorylation is an important type of post-translational protein modification. In Western Blot experiment, the assay of phosphoproteins need special phospho antibodies, which are expensive, difficult to preserve, poorly reproducible. To this end, the immobilized metal ion affinity luminescent silica nanoparticles for instead of phospho antibodies were prepared. A layer of polymer was created on the surface of the silica nanoparticles via co-polymerization to protect the nanoparticles and to functionalize them with the immobilized metal ion affinity property to specifically label the phosphorylated proteins in Western Blot assays. The affinity luminescent silica nanoparticles were prepared with the following procedure. First, the sol-gel precursor fluorescein isothiocyanate-3-aminopropyltriethoxysilane (FITC-APTES) with the fluorescent moiety was prepared by modifying APTES with FITC. The luminescent silica nanoparticles (FITC@SiO₂) were synthesized using the Stöber synthesis method in a reversed microemulsion. Briefly, 123.2 mL of cyclohexane, 25.6 mL of n-hexanol, and 5.44 mL of deionized water were ultrasonically mixed, and then 28.3 g of Triton X-100 were added and the mixture was magnetically stirred for 15 min to form a clear and transparent microemulsion system. Within 10 min, 0.8 mL of FITC-APTES precursor, 1.6 mL of tetraethoxysilane (TEOS), and 0.96 mL of concentrated ammonia (25%-27%, mass fraction) were added to the microemulsion, and the mixture was stirred at 24 ℃ for 24 h. After the reaction, the microemulsion system was destroyed by adding 200 mL of ethanol. The resulting FITC@SiO₂ luminescent silica nanoparticles were centrifuged, and washed three times with ethanol. After dryness, the FITC@SiO₂ nanoparticles were modified with methacryloxy-propyltrimethoxysilane (MPS) to introduce the double bonds for further modification. The functional monomer nitrilotriacetic acid (NTA) and glycidyl methacrylate (GMA) were copolymerized on the surface of the nanoparticles to convert FITC@SiO₂-MPS to FITC@SiO₂-MPS-GMA-NTA. The polymer coating of the silica nanoparticles was not only able to protect the silica from hydrolysis, but also to introduce the functional groups of nitrilotriacetic acid, which can chelate with metal ions. Elemental analysis demonstrated that the NTA groups had been bonded to the surface of the nanoparticles via copolymerization. The polymerization did not affect the morphology and fluorescence properties of the nanoparticles. The FITC@SiO₂-MPS-GMA-NTA nanoparticles were activated with three different metal ions Zr⁴⁺, Fe³⁺, and Ti⁴⁺, for the enrichment of phosphorylated peptides derived form α-casein tryptic digestion. HPLC-MS analysis indicated that the FITC@SiO₂-MPS-GMA-NTA-Ti ⁴⁺ nanoparticles are the best for the enrichment of phosphorylated peptides. The FITC@SiO₂-MPS-GMA-NTA-Ti⁴⁺ nanoparticles were used for labelling the phosphorylated proteins in Western Blot experiment. The electrophoretic band of α-casein could be clearly labeled with the FITC@SiO₂-MPS-GMA-NTA-Ti ⁴⁺ nanoparticles, while the bovine albumin band could not be labelled. This indicates that the luminescent FITC@SiO₂-MPS-GMA-NTA-Ti⁴⁺nanoparticles can be used to label the phosphorylated proteins in Western Blot experiments.

Loading and Release of Charged and Neutral Fluorescent Dyes into and from Mesoporous Materials: A Key Role for Sensing Applications

The aim of this study is to determine the efficiency of loading and release of several zwitterionic, neutral, anionic and cationic dyes into/from mesoporous nanoparticles to find the optimum loading and release conditions for their application in detection protocols. The loading is carried out for MCM-41 type silica supports suspended in phosphate-buffered saline (PBS) buffer (pH 7.4) or in acetonitrile, involving the dyes (rhodamine B chloride, rhodamine 101 chloride, rhodamine 101 perchlorate, rhodamine 101 inner salt, meso-(4-hydroxyphenyl)-boron–dipyrromethene (BODIPY), sulforhodamine B sodium salt and fluorescein 27). As a general trend, rhodamine-based dyes are loaded with higher efficiency, when compared with BODIPY and fluorescein dyes. Between the rhodamine-based dyes, their charge and the solvent in which the loading process is carried out play important roles for the amount of cargo that can be loaded into the materials. The delivery experiments carried out in PBS buffer at pH 7.4 reveal for all the materials that anionic dyes are more efficiently released compared to their neutral or cationic counterparts. The overall best performance is achieved with the negatively charged sulforhodamine B dye in acetonitrile. This material also shows a high delivery degree in PBS buffer.

Design and synthesis of a new magnetic metal organic framework as a versatile platform for immobilization of acidic catalysts and CO2 fixation reaction

The first report of the use of an acidic magnetic metal organic framework for the chemical fixation of CO2 as an environmentally friendly reaction.

Hydrophobic Modification on the Surface of SiO2 Nanoparticle: Wettability Control

Good control of the morphology, particle size, and wettability of silica nanoparticles is of increasing importance to their use in a variety of fields. Here, we propose a strategy to tune the surface wettability of nanosilica by changing the dosage of a chemical modifier. A series of measurements, including scanning electron microscopy (SEM), laser scatting technique, Fourier transform infrared (FTIR) spectroscopy, thermogravimetry, and surface hydroxyl number and water contact angle measurement, were conducted to verify the surface chemistry and wettability of these nanoparticles. Through controlled chemical modification, the contact angle of the treated nanoparticles increases from 34.7 to 155° with increasing amount of dichlorodimethylsilane (DCDMS) within a molar ratio (MR) between DCDMS and nanoparticles of 5.17. The number of hydroxyl groups covered on the particle surface decreases gradually from 1.79 to 0.47, and the surface grafting rate could reach 73.7%. As the addition of dichlorodimethylsilane equals MR 5.17, the contact angle reaches the maximum value of 155°, which displays excellent superhydrophobicity. After surpassing the point of MR 5.17, the contact angle does not increase but starts to decrease, ultimately remaining stable at 135°. It can be concluded that the surface wettability of nano-SiO₂ particles can be precisely modulated by varying the amounts of the modifier. Furthermore, the modulating mechanism of the process occurring on the surface of SiO₂ particles has been investigated at the molecular level.

Application of micro/nanomaterials in adsorption and sensing of active ingredients in traditional Chinese medicine

Traditional Chinese medicine (TCM) has been widely applied for the prevention and cure of various diseases for centuries. Ingredient with pharmacological activity is the key to the application of TCM. Hence, it is of significance to separate and detect active ingredients in TCM effectively. Micro/nanomaterial is the promising candidate for adsorption and sensing due to its unique physical and chemical properties. For years, many efforts have been made to develop functional micro/nanomaterials to realize the effective adsorption or sensing of bioactive compounds in TCM. In this review, we discussed recent progresses in the application of various functional micro/nanomaterials for adsorption or detection (electrochemical detection, fluorescent detection, and colorimetric detection) of active ingredients. Based on the kind of matrix materials, micro/nano-adsorbents or sensors can be classified into following categories: metal-based micro/nanomaterials, porous materials, carbon-based materials, graphene/graphite-liked micro/nanomaterials and hybrid micro/nanomaterials.

Synthesis of gold nanoparticle-loaded magnetic carbon microsphere based on reductive and binding properties of polydopamine for recyclable catalytic applications

A hierarchical nanostructure of Fe₃O₄@C–Au, with Fe₃O₄ as a core and carbon as a shell, was synthesized using a simple method.